


Tauchen Sie ein in die Geschichte der Luft- und Raumfahrtinnovation mit dem LEGO® Icons Shuttle Carrier Aircraft (10360). Dieses fesselnde Bauprojekt aus 2.417 Teilen bildet die ikonische Boeing™ 747™ und das legendäre NASA Space Shuttle Enterprise nach, die entscheidend die Ära der bemannten Raumfahrt prägten. Konstruieren Sie den eleganten Rumpf und das ausfahrbare 18-rädrige Fahrwerk des Boeing-Flugzeugs, komplett mit dem Shuttle-Montagesystem. Das NASA Space Shuttle Enterprise Modell verfügt über eine anbringbare Heckverkleidung sowie abnehmbare Triebwerke und Fahrwerke, die im Frachtraum verstaut werden können. Ein stabiler Ständer mit Informationstafeln für jedes Modell macht dies zu einem beeindruckenden Herzstück.
Teile-Inventar
| Teil | Farbe | Anz. |
|---|---|---|
![]() Sticker Sheet for Set 10360-1 10113937 | Unknown | 1× |
![]() Technic Pin Connector Hub with 2 Perpendicular Axles 10197 | Dunkelblaugrau | 2× |
![]() Tile 6 x 6 with Bottom Tubes 10202 | Schwarz | 2× |
![]() Tile 6 x 6 with Bottom Tubes 10202 | Weiß | 2× |
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Weiß | 2× |
![]() Technic Gear 8 Tooth [Reinforced] 10928 | Dunkelblaugrau | 3× |
![]() Tile Special 2 x 2 Inverted 11203 | Dunkelblaugrau | 1× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Sandfarben | 5× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Schwarz | 25× |
![]() Plate 3 x 3 11212 | Weiß | 4× |
10 von 535 Teilen angezeigt
🔓 Melde dich an um alle Teile zu sehen| Technic Gear 8 Tooth [Reinforced] | 10928 | Dunkelblaugrau | 3× |
| Tile Special 2 x 2 Inverted | 11203 | Dunkelblaugrau | 1× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Sandfarben | 5× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Schwarz | 25× |
| Plate 3 x 3 | 11212 | Weiß | 4× |
| Plate 3 x 3 | 11212 | Hellblaugrau | 6× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Dunkelblaugrau | 1× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Hellblaugrau | 2× |
| Tile Round 1 x 2 | 1126 | Sandfarben | 3× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Hellblaugrau | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Weiß | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Schwarz | 3× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Weiß | 6× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Dunkelblau | 2× |
| Slope Curved 4 x 1 Inverted | 13547 | Hellblaugrau | 2× |
| Slope Curved 4 x 1 Inverted | 13547 | Weiß | 1× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Hellblaugrau | 2× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Hellblaugrau | 2× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Hellblaugrau | 3× |
| Brick 1 x 1 x 3 | 14716 | Weiß | 1× |
| Tile 2 x 2 Corner | 14719 | Schwarz | 2× |
| Tile 2 x 2 Corner | 14719 | Hellblaugrau | 2× |
| Tile 2 x 2 Corner | 14719 | Dunkelblaugrau | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Schwarz | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Hellblaugrau | 62× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Schwarz | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Weiß | 29× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Weiß | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Hellblaugrau | 1× |
| Tile Round 2 x 2 with Hole | 15535 | Rot | 5× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Schwarz | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Dunkelblaugrau | 5× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Hellblaugrau | 2× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Weiß | 2× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Hellblaugrau | 12× |
| Wedge Plate 4 Stud 45° Angle Plate | 15706 | Dunkelblaugrau | 4× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Weiß | 6× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Hellblaugrau | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Schwarz | 1× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Hellblaugrau | 3× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Schwarz | 6× |
| Hinge Panel 3 x 4 x 3 Curved | 18910 | Weiß | 8× |
| Plate Round Corners 2 x 6 Double | 18980 | Schwarz | 1× |
| Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] | 1927 | Schwarz | 1× |
| Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] | 1927 | Weiß | 7× |
| Tile Special 2 x 3 Pentagonal | 22385 | Hellblaugrau | 2× |
| Bar 2L with Towball | 22484 | Dunkelblaugrau | 6× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Rot | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Sandfarben | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Hellblaugrau | 12× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Dunkelblaugrau | 4× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Weiß | 4× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Hellblaugrau | 6× |
| Brick 2 x 2 Corner | 2357 | Schwarz | 2× |
| Brick 2 x 2 Corner | 2357 | Weiß | 2× |
| Panel 1 x 3 x 1 | 23950 | Weiß | 8× |
| Technic Arm with Gear 8 Tooth and 1.5L Axle | 24014 | Hellblaugrau | 2× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Dunkelblaugrau | 2× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Schwarz | 4× |
| Wedge Plate 3 x 6 Cut Corners | 2419 | Weiß | 3× |
| Wedge Plate 3 x 6 Cut Corners | 2419 | Hellblaugrau | 4× |
| Plate 2 x 2 Corner | 2420 | Sandfarben | 2× |
| Plate 2 x 2 Corner | 2420 | Dunkelblaugrau | 2× |
| Plate 2 x 2 Corner | 2420 | Schwarz | 8× |
| Plate 2 x 2 Corner | 2420 | Hellblaugrau | 32× |
| Plate 2 x 2 Corner | 2420 | Weiß | 38× |
| Wedge Plate 2 x 2 Left | 24299 | Hellblaugrau | 1× |
| Wedge Plate 2 x 2 Left | 24299 | Weiß | 2× |
| Wedge Plate 2 x 2 Left | 24299 | Schwarz | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Hellblaugrau | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Weiß | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Schwarz | 2× |
| Slope Curved 3 x 2 No Studs | 24309 | Weiß | 4× |
| Tile 1 x 4 with Groove | 2431 | Weiß | 10× |
| Tile 1 x 4 with Groove | 2431 | Schwarz | 4× |
| Tile 1 x 4 with Groove | 2431 | Hellblaugrau | 2× |
| Technic Axle 3 with Stop | 24316 | Rotbraun | 2× |
| Plate 2 x 12 | 2445 | Hellblaugrau | 4× |
| Plate 2 x 12 | 2445 | Weiß | 1× |
| Slope Inverted 75° 2 x 1 x 3 | 2449 | Schwarz | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Hellblaugrau | 6× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Schwarz | 2× |
| Brick 2 x 6 | 2456 | Weiß | 1× |
| Brick 1 x 16 | 2465 | Weiß | 2× |
| Barrel 2 x 2 x 2 | 2489 | Hellblaugrau | 4× |
| Plate Special 1 x 2 with Long Towball | 2508 | Weiß | 3× |
| Tile Round 1 x 1 Quarter | 25269 | Schwarz | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Hellblaugrau | 6× |
| Plate 4 x 4 Corner | 2639 | Weiß | 2× |
| Plate 4 x 4 Corner | 2639 | Hellblaugrau | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Dunkelblaugrau | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Hellblaugrau | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] with Dark Blue Half Circle print | 2654pr0029 | Weiß | 1× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Hellblaugrau | 12× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Dunkelblaugrau | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Weiß | 6× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Schwarz | 6× |
| Tile 2 x 3 | 26603 | Weiß | 6× |
| Tile 2 x 3 | 26603 | Schwarz | 1× |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 26604 | Rotbraun | 6× |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 26604 | Dunkelblaugrau | 2× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Schwarz | 3× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Weiß | 1× |
| Technic Worm Gear Short | 27938 | Dunkelblaugrau | 1× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Weiß | 3× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Hellblaugrau | 6× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Schwarz | 1× |
| Brick Special 1 x 2 with Grille | 2877 | Weiß | 3× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Schwarz | 2× |
| Minifig Neckwear Bracket [One Stud] - Reinforced | 28974 | Dunkelblaugrau | 1× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Hellblaugrau | 3× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Weiß | 3× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Weiß | 3× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Hellblaugrau | 3× |
| Brick Special 1 x 1 with Handle | 2921 | Schwarz | 2× |
| Brick 2 x 4 | 3001 | Sandfarben | 3× |
| Brick 2 x 4 | 3001 | Hellblaugrau | 2× |
| Brick 2 x 4 | 3001 | Weiß | 2× |
| Brick 2 x 3 | 3002 | Schwarz | 3× |
| Brick 2 x 3 | 3002 | Weiß | 2× |
| Brick 2 x 2 | 3003 | Sandfarben | 3× |
| Brick 2 x 2 | 3003 | Weiß | 5× |
| Brick 2 x 2 | 3003 | Schwarz | 2× |
| Brick 1 x 2 | 3004 | Schwarz | 7× |
| Brick 1 x 1 | 3005 | Weiß | 15× |
| Brick 1 x 1 | 3005 | Schwarz | 8× |
| Brick 1 x 1 | 3005 | Dunkelblaugrau | 4× |
| Brick 1 x 1 | 3005 | Hellblaugrau | 2× |
| Brick 1 x 8 | 3008 | Schwarz | 1× |
| Brick 1 x 6 | 3009 | Hellblaugrau | 5× |
| Brick 1 x 6 | 3009 | Sandfarben | 1× |
| Brick 1 x 6 | 3009 | Weiß | 3× |
| Brick Arch 1 x 5 x 4 Inverted | 30099 | Schwarz | 4× |
| Brick 1 x 4 | 3010 | Hellblaugrau | 3× |
| Brick 1 x 4 | 3010 | Weiß | 8× |
| Brick 1 x 4 | 3010 | Sandfarben | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Sandfarben | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Weiß | 7× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Dunkelblaugrau | 2× |
| Plate 2 x 4 | 3020 | Sandfarben | 10× |
| Plate 2 x 4 | 3020 | Rot | 2× |
| Plate 2 x 4 | 3020 | Schwarz | 8× |
| Plate 2 x 4 | 3020 | Hellblaugrau | 5× |
| Plate 2 x 4 | 3020 | Dunkelblaugrau | 4× |
| Plate 2 x 4 | 3020 | Weiß | 8× |
| Plate 2 x 3 | 3021 | Dunkelblaugrau | 4× |
| Plate 2 x 3 | 3021 | Weiß | 9× |
| Plate 2 x 3 | 3021 | Hellblaugrau | 9× |
| Plate 2 x 3 | 3021 | Schwarz | 4× |
| Plate 2 x 2 | 3022 | Rot | 11× |
| Plate 2 x 2 | 3022 | Weiß | 8× |
| Plate 2 x 2 | 3022 | Sandfarben | 8× |
| Plate 2 x 2 | 3022 | Schwarz | 18× |
| Plate 2 x 2 | 3022 | Schwarz | 10× |
| Plate 1 x 2 | 3023 | Hellblaugrau | 24× |
| Plate 1 x 2 | 3023 | Orange | 1× |
| Plate 1 x 2 | 3023 | Sandfarben | 8× |
| Plate 1 x 2 | 3023 | Schwarz | 12× |
| Plate 1 x 2 | 3023 | Weiß | 67× |
| Plate 1 x 1 | 3024 | Rot | 8× |
| Plate 1 x 1 | 3024 | Weiß | 34× |
| Plate 1 x 1 | 3024 | Hellblaugrau | 35× |
| Plate 4 x 12 | 3029 | Schwarz | 1× |
| Plate 4 x 12 | 3029 | Hellblaugrau | 2× |
| Plate 4 x 4 | 3031 | Schwarz | 1× |
| Plate 4 x 4 | 3031 | Weiß | 2× |
| Plate 2 x 8 | 3034 | Hellblaugrau | 1× |
| Plate 2 x 8 | 3034 | Schwarz | 4× |
| Plate 2 x 8 | 3034 | Weiß | 1× |
| Plate 4 x 8 | 3035 | Schwarz | 1× |
| Plate Round Corner 3 x 3 | 30357 | Hellblaugrau | 4× |
| Plate 6 x 8 | 3036 | Schwarz | 1× |
| Slope 45° 2 x 4 | 3037 | Weiß | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Dunkelblaugrau | 4× |
| Slope 45? 2 x 2 | 3039 | Hellblaugrau | 2× |
| Slope 45? 2 x 2 | 3039 | Orange | 3× |
| Slope 45? 2 x 2 | 3039 | Schwarz | 4× |
| Slope 45? 2 x 2 | 3039 | Weiß | 4× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Weiß | 2× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Schwarz | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Hellblaugrau | 6× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Hellblaugrau | 4× |
| Wedge Plate 8 x 8 Cut Corner | 30504 | Hellblaugrau | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Dunkelblaugrau | 6× |
| Brick Round 1 x 1 Open Stud | 3062b | Schwarz | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Rot | 2× |
| Tile 2 x 2 with Groove | 3068b | Hellblaugrau | 2× |
| Tile 2 x 2 with Groove | 3068b | Weiß | 2× |
| Tile 1 x 2 with Groove | 3069b | Dunkelblau | 6× |
| Tile 1 x 2 with Groove | 3069b | Weiß | 22× |
| Tile 1 x 1 with Groove | 3070b | Schwarz | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Sandfarben | 1× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Dunkelblaugrau | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Dunkelblaugrau | 1× |
| Technic Plate 2 x 6 [5 Holes] | 32001 | Weiß | 1× |
| Technic Pin 3/4 | 32002 | Sandfarben | 4× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Weiß | 4× |
| Plate Special 1 x 2 with Door Rail | 32028 | Schwarz | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Gelb | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Dunkelblaugrau | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Schwarz | 2× |
| Technic Beam 3 x 3 L-Shape Thin | 32056 | Hellblaugrau | 4× |
| Technic Axle 2 Notched | 32062 | Rot | 9× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Hellblaugrau | 15× |
| Technic Axle 5 | 32073 | Gelb | 3× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Gelb | 5× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Schwarz | 2× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Schwarz | 1× |
| Technic Beam 1 x 4 Thin | 32449 | Hellblaugrau | 1× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Orange | 2× |
| Technic Beam 1 x 7 Thick | 32524 | Dunkelblaugrau | 2× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Dunkelblaugrau | 1× |
| Slope Inverted 45° 4 x 1 Double with 1 x 2 Recessed | 32802 | Dunkelblaugrau | 1× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Schwarz | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Hellblaugrau | 8× |
| Technic Worm Gear Type 2 | 32905 | Hellblaugrau | 2× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Weiß | 3× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Schwarz | 10× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Rot | 2× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Sandfarben | 4× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Weiß | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Hellblaugrau | 6× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Schwarz | 8× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Hellblaugrau | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Weiß | 7× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Schwarz | 2× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Hellblaugrau | 6× |
| Wheel 8 x 6 with Slot | 34337 | Hellblaugrau | 24× |
| Plate 1 x 8 | 3460 | Weiß | 1× |
| Plate 1 x 8 | 3460 | Hellblaugrau | 4× |
| Plate 1 x 8 | 3460 | Dunkelblaugrau | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Hellblaugrau | 2× |
| Wedge Sloped 2 x 5 Left | 3504 | Hellblaugrau | 2× |
| Wedge Sloped 2 x 5 Left | 3504 | Weiß | 2× |
| Plate Special 4 x 4 with 3 x 3 Quarter Round Cutout | 35044 | Schwarz | 2× |
| Wedge Sloped 2 x 5 Right | 3505 | Weiß | 2× |
| Wedge Sloped 2 x 5 Right | 3505 | Hellblaugrau | 2× |
| Technic Gear 20 Tooth Double Bevel with Clutch on Both Sides | 35185 | Schwarz | 1× |
| Wedge Plate 8 x 3, 8° Left | 3544 | Weiß | 2× |
| Wedge Plate 8 x 3, 8° Right | 3545 | Weiß | 2× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Schwarz | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Weiß | 11× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Hellblaugrau | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Schwarz | 59× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Dunkelblaugrau | 6× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Hellblaugrau | 8× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Weiß | 6× |
| Brick 1 x 3 | 3622 | Weiß | 2× |
| Brick 1 x 3 | 3622 | Dunkelblaugrau | 2× |
| Brick 1 x 3 | 3622 | Schwarz | 7× |
| Plate 1 x 3 | 3623 | Weiß | 19× |
| Plate 1 x 3 | 3623 | Hellblaugrau | 4× |
| Plate 1 x 3 | 3623 | Dunkelblaugrau | 1× |
| Plate 1 x 3 | 3623 | Rot | 6× |
| Plate 1 x 3 | 3623 | Schwarz | 2× |
| Plate 1 x 3 | 3623 | Schwarz | 3× |
| Plate 1 x 3 | 3623 | Sandfarben | 4× |
| Technic Gear 24 Tooth [New Style with Single Axle Hole] | 3648b | Dunkelblaugrau | 1× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Schwarz | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Weiß | 7× |
| Slope Inverted 45° 2 x 1 | 3665 | Hellblaugrau | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Dunkelblaugrau | 2× |
| Plate 1 x 6 | 3666 | Weiß | 22× |
| Plate 1 x 6 | 3666 | Dunkelblaugrau | 4× |
| Plate 1 x 6 | 3666 | Hellblaugrau | 10× |
| Plate 1 x 6 | 3666 | Gelb | 1× |
| Plate 1 x 6 | 3666 | Schwarz | 2× |
| Slope 65° 2 x 2 x 2 with Bottom Tube | 3678b | Weiß | 1× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Schwarz | 6× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Schwarz | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Schwarz | 5× |
| Technic Axle 4 | 3705 | Rot | 6× |
| Technic Axle 4 | 3705 | Schwarz | 2× |
| Technic Axle 6 | 3706 | Schwarz | 2× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Schwarz | 1× |
| Plate 1 x 4 | 3710 | Weiß | 21× |
| Plate 1 x 4 | 3710 | Schwarz | 7× |
| Plate 1 x 4 | 3710 | Hellblaugrau | 3× |
| Plate 1 x 4 | 3710 | Sandfarben | 4× |
| Plate 1 x 4 | 3710 | Dunkelblaugrau | 4× |
| Plate 1 x 4 | 3710 | Dunkelblau | 3× |
| Plate 1 x 4 | 3710 | Schwarz | 4× |
| Technic Bush | 3713 | Schwarz | 4× |
| Technic Bush | 3713 | Rot | 3× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Weiß | 6× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Sandfarben | 5× |
| Plate 2 x 6 | 3795 | Schwarz | 1× |
| Plate 2 x 6 | 3795 | Sandfarben | 2× |
| Plate 2 x 6 | 3795 | Hellblaugrau | 11× |
| Plate 2 x 6 | 3795 | Dunkelblaugrau | 5× |
| Plate 2 x 10 | 3832 | Weiß | 2× |
| Plate 2 x 10 | 3832 | Dunkelblaugrau | 1× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Schwarz | 1× |
| Hinge Brick 1 x 2 Base | 3937 | Schwarz | 2× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Schwarz | 1× |
| Plate 6 x 6 | 3958 | Weiß | 1× |
| Plate Angled 3 x 3 with Heart Shape | 39613 | Hellblaugrau | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Sandfarben | 6× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Gelb | 2× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Weiß | 6× |
| Tile 1 x 8 with Groove | 4162 | Hellblaugrau | 4× |
| Tile 1 x 8 with Groove | 4162 | Weiß | 7× |
| Technic Beam 1 x 2 Thin | 41677 | Weiß | 2× |
| Technic Beam 1 x 2 Thin | 41677 | Dunkelblaugrau | 2× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Hellblaugrau | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Hellblaugrau | 4× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Weiß | 2× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Weiß | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Schwarz | 4× |
| Wedge Plate 4 x 2 Right | 41769 | Weiß | 3× |
| Wedge Plate 4 x 2 Right | 41769 | Hellblaugrau | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Hellblaugrau | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Weiß | 3× |
| Wedge Plate 4 x 2 Left | 41770 | Schwarz | 4× |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 42003 | Hellblaugrau | 2× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Dunkelblaugrau | 5× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Hellblaugrau | 2× |
| Technic Pin 1/2 | 4274 | Weiß | 4× |
| Plate 2 x 16 | 4282 | Dunkelblaugrau | 4× |
| Plate 2 x 16 | 4282 | Sandfarben | 1× |
| Plate 2 x 16 | 4282 | Hellblaugrau | 2× |
| Slope 33° 3 x 1 | 4286 | Schwarz | 4× |
| Wedge Sloped 45° 3 x 3 Left | 42862 | Weiß | 3× |
| Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection | 4287c | Weiß | 6× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Schwarz | 1× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Hellblaugrau | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Rot | 3× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Schwarz | 16× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Schwarz | 10× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Weiß | 1× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Weiß | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Weiß | 4× |
| Wedge Plate 3 x 2 Right | 43722 | Schwarz | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Weiß | 4× |
| Wedge Plate 3 x 2 Left | 43723 | Schwarz | 1× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Weiß | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Schwarz | 1× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Dunkelblaugrau | 4× |
| Plate 1 x 10 | 4477 | Weiß | 10× |
| Plate 1 x 10 | 4477 | Sandfarben | 1× |
| Plate 1 x 10 | 4477 | Schwarz | 2× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Weiß | 4× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Dunkelblaugrau | 8× |
| Brick Special 1 x 2 with Pin - Bottom Stud Holder | 44865 | Schwarz | 2× |
| Technic Axle 3 | 4519 | Gelb | 3× |
| Technic Axle 3 | 4519 | Hellblaugrau | 3× |
| Slope 1 x 6 x 1 with 1 x 2 x 1/3 Cutout | 4569 | Weiß | 4× |
| Wedge Plate 12 x 3 Left | 47397 | Schwarz | 1× |
| Wedge Plate 12 x 3 Left | 47397 | Weiß | 1× |
| Wedge Plate 12 x 3 Left | 47397 | Hellblaugrau | 5× |
| Wedge Plate 12 x 3 Right | 47398 | Hellblaugrau | 5× |
| Wedge Plate 12 x 3 Right | 47398 | Weiß | 1× |
| Wedge Plate 12 x 3 Right | 47398 | Schwarz | 1× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Dunkelblaugrau | 1× |
| Cone 4 x 4 x 2 Hollow No Studs with Dark Blue Vertical Stripes print | 4742pr0003 | Weiß | 1× |
| Wedge Curved 4 x 4 No Top Studs | 47753 | Weiß | 1× |
| Wedge Sloped 45° 3 x 3 Right | 48165 | Weiß | 3× |
| Wedge Plate 6 x 4 Right | 48205 | Weiß | 1× |
| Wedge Plate 6 x 4 Right | 48205 | Hellblaugrau | 2× |
| Wedge Plate 6 x 4 Right | 48205 | Schwarz | 1× |
| Wedge Plate 6 x 4 Left | 48208 | Hellblaugrau | 2× |
| Wedge Plate 6 x 4 Left | 48208 | Schwarz | 1× |
| Wedge Plate 6 x 4 Left | 48208 | Weiß | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Weiß | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Sandfarben | 3× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Hellblaugrau | 1× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Weiß | 4× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Hellblaugrau | 2× |
| Wheel Holder 2 x 2 Thin with Split Wheel Clip Pins | 4870 | Hellblaugrau | 3× |
| Slope Inverted 45° 4 x 2 Double | 4871 | Hellblaugrau | 1× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Weiß | 2× |
| Brick Round 3 x 3 Dome with Center Stud | 49308 | Weiß | 1× |
| Brick 1 x 4 x 3 | 49311 | Weiß | 1× |
| Wedge Plate 8 x 3, 22° Right | 50304 | Schwarz | 1× |
| Wedge Plate 8 x 3, 22° Left | 50305 | Schwarz | 1× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Sandfarben | 5× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Weiß | 2× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Weiß | 2× |
| Slope Curved 2 x 2 with Stud Notch Right | 5093 | Weiß | 2× |
| Slope Curved 2 x 2 with Stud Notch Left | 5095 | Weiß | 2× |
| Wedge Curved 10 x 3 Left | 50955 | Weiß | 2× |
| Wedge Curved 10 x 3 Left with Dark Blue Stripes, Black Airplane Windows print | 50955pr0004 | Weiß | 1× |
| Wedge Curved 10 x 3 Right | 50956 | Weiß | 2× |
| Wedge Curved 10 x 3 Right with Dark Blue Stripes, Black Airplane Windows print | 50956pr0004 | Weiß | 1× |
| Wedge Plate 2 x 4 | 51739 | Hellblaugrau | 2× |
| Wedge Plate 2 x 4 | 51739 | Schwarz | 1× |
| Wedge Plate 2 x 4 | 51739 | Weiß | 1× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Hellblaugrau | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Weiß | 12× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Hellblaugrau | 3× |
| Wedge Plate 6 x 3 Right | 54383 | Dunkelblaugrau | 2× |
| Wedge Plate 6 x 3 Left | 54384 | Dunkelblaugrau | 2× |
| Technic Axle 8 with Stop | 55013 | Dunkelblaugrau | 1× |
| Flag 2 x 4 Triangle | 5555 | Weiß | 2× |
| Wedge Curved 6 x 2 Right, Smooth Inner Walls | 5711 | Weiß | 1× |
| Bracket 5 x 1 x 1 1/3 | 5712 | Schwarz | 4× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Hellblaugrau | 2× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Weiß | 4× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Weiß | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Dunkelblaugrau | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Hellblaugrau | 5× |
| Tyre 14 x 4 Smooth Small Single [New Style] | 59895 | Schwarz | 24× |
| Cone 1 x 1 [Top Groove] | 59900 | Dunkelblaugrau | 8× |
| Cone 1 x 1 [Top Groove] | 59900 | Schwarz | 2× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Schwarz | 1× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Hellblaugrau | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Hellblaugrau | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Weiß | 5× |
| Plate 1 x 12 | 60479 | Weiß | 2× |
| Plate 1 x 12 | 60479 | Schwarz | 3× |
| Plate 1 x 12 | 60479 | Hellblaugrau | 4× |
| Slope 65° 2 x 1 x 2 | 60481 | Weiß | 2× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Schwarz | 4× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Hellblaugrau | 1× |
| Wedge Plate 6 x 6 Cut Corner | 6106 | Schwarz | 2× |
| Brick 1 x 12 | 6112 | Weiß | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Schwarz | 3× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Schwarz | 2× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Hellblaugrau | 2× |
| Technic Beam 3 x 0.5 Liftarm with Boss and Blocked, Squared Pin Hole | 61408 | Schwarz | 2× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Weiß | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Sandfarben | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Schwarz | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Orange | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Dunkelblaugrau | 5× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rot | 4× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Hellblaugrau | 2× |
| Plate Special 4 x 6 with Studs on 3 Edges | 6180 | Hellblaugrau | 2× |
| Brick Arch 1 x 6 x 2 Curved Top | 6183 | Weiß | 2× |
| Panel 1 x 1 x 1 Corner | 6231 | Schwarz | 2× |
| Cone 3 x 3 x 2 | 6233 | Schwarz | 3× |
| Technic Pin Connector Round [Slotted] | 62462 | Schwarz | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Gelb | 1× |
| Plate Special 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center | 63082 | Hellblaugrau | 3× |
| Tile 1 x 3 | 63864 | Hellblaugrau | 4× |
| Tile 1 x 3 | 63864 | Weiß | 11× |
| Tile 1 x 3 | 63864 | Schwarz | 3× |
| Technic Axle and Pin Connector Perpendicular Triple | 63869 | Schwarz | 3× |
| Wedge Plate 2 x 4 27° Right | 65426 | Schwarz | 1× |
| Wedge Plate 2 x 4 27° Right | 65426 | Weiß | 1× |
| Wedge Plate 2 x 4 27° Left | 65429 | Weiß | 1× |
| Wedge Plate 2 x 4 27° Left | 65429 | Schwarz | 1× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Schwarz | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Dunkelblaugrau | 4× |
| Technic Cam | 6575 | Hellblaugrau | 2× |
| Technic Gear 12 Tooth Bevel | 6589 | Sandfarben | 2× |
| Technic Beam 1 x 3 Thin | 6632 | Orange | 1× |
| Technic Beam 1 x 3 Thin | 6632 | Dunkelblaugrau | 2× |
| Tile 1 x 6 with Groove | 6636 | Weiß | 5× |
| Tile 1 x 6 with Groove | 6636 | Hellblaugrau | 5× |
| Tile 1 x 6 with Groove | 6636 | Schwarz | 1× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Hellblaugrau | 1× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Weiß | 3× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Schwarz | 4× |
| Brick Round, Half 1 x 2 | 68013 | Hellblaugrau | 2× |
| Wedge Plate 4 x 8 Cut Corners | 68297 | Schwarz | 1× |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 68568 | Weiß | 20× |
| Tile 2 x 6 | 69729 | Weiß | 4× |
| Tile 2 x 6 | 69729 | Hellblaugrau | 6× |
| Plate Special 2 x 2 with Bar Frame Round | 7068 | Weiß | 4× |
| Landing Gear with 4 Wheel Holders, Axle | 7222 | Hellblaugrau | 5× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Hellblaugrau | 4× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Rot | 1× |
| Brick Round 3 x 3 x 2 Recessed Center with 2 x 2 Studs and Axle Hole | 73111 | Weiß | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Hellblaugrau | 46× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Hellblaugrau | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Weiß | 2× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Weiß | 2× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Dunkelblaugrau | 3× |
| Plate 3 x 3 Corner | 77844 | Hellblaugrau | 8× |
| Plate 3 x 3 Corner | 77844 | Schwarz | 4× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Hellblaugrau | 8× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Hellblaugrau | 12× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Weiß | 8× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Schwarz | 8× |
| Plate 1 x 5 | 78329 | Weiß | 2× |
| Wedge Plate 6 x 2 Left | 78443 | Weiß | 1× |
| Wedge Plate 6 x 2 Left | 78443 | Hellblaugrau | 6× |
| Wedge Plate 6 x 2 Left | 78443 | Schwarz | 3× |
| Wedge Plate 6 x 2 Right | 78444 | Weiß | 1× |
| Wedge Plate 6 x 2 Right | 78444 | Schwarz | 3× |
| Wedge Plate 6 x 2 Right | 78444 | Hellblaugrau | 6× |
| Wedge Sloped 65° 2 x 2 x 2 Corner | 78886 | Schwarz | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Dunkelblaugrau | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Weiß | 10× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Hellblaugrau | 14× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Dunkelblaugrau | 2× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Weiß | 2× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Weiß | 2× |
| Windscreen 2 x 4 Half Dome | 81911 | Trans-schwarz | 1× |
| Windscreen 2 x 4 Half Dome with Black Aircraft Windows print | 81911pr0002 | Weiß | 1× |
| Plate Round 1 x 1 with Open Stud | 85861 | Hellblaugrau | 4× |
| Plate Round 1 x 1 with Open Stud | 85861 | Sandfarben | 1× |
| Plate Round 1 x 1 with Open Stud | 85861 | Gelb | 8× |
| Plate Round 1 x 1 with Open Stud | 85861 | Rot | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Weiß | 35× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Hellblaugrau | 12× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Schwarz | 2× |
| Tile 2 x 4 with Groove | 87079 | Schwarz | 3× |
| Tile 2 x 4 with Groove | 87079 | Hellblaugrau | 1× |
Bau-DNA
Teile-Einblicke fur Shuttle Carrier Aircraft
Mit 2.417 Teilen liegt dieser Build +16% gegenuber dem durchschnittlichen Icons Set und +281% gegenuber der durchschnittlichen Veroffentlichung aus 2025.
Im Vergleich zum durchschnittlichen Icons Set
Durchschnittliches Icons Set: 2.090 Teile uber 80 andere Sets.
Im Vergleich zum durchschnittlichen Set von 2025
Durchschnittliches Set von 2025: 634 Teile uber 561 andere Sets.
Farbprofil
Dominante Farbe
Weiß
Einzigartige Teile
7.6 Teile pro einzigartigem Typ
Wiederholungsfaktor
Durchschnittliche Teile pro einzigartigem Typ.
Meistgenutztes Teil
Plate 1 x 2
112xErgebnisse basieren auf offiziellen LEGO-Teileinventaren. Die Genauigkeit verbessert sich wenn du Set-Vollständigkeit bestätigst.
Diese Seite ist nicht mit der LEGO Gruppe verbunden oder von ihr genehmigt.




![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061024.jpg)
![Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg)



