


Erobere die ultimative Baustelle mit dem LEGO City 60494-1 Muldenkipper & Radlader Set. Dieses beeindruckende Duo erweckt dynamische Bauaction zum Leben, mit einem kolossalen Muldenkipper, der über eine voll funktionsfähige Kipppritsche verfügt, bereit, riesige Mengen Material zu transportieren. Sein robuster Begleiter, der artikulierte Radlader, prahlt mit einem kräftigen, ausfahrbaren Auslegerarm und einer massiven kippbaren Schaufel, perfekt zum Schaufeln und Räumen selbst des härtesten Geländes. Zwei engagierte Bauarbeiter-Minifiguren, ausgestattet mit wichtiger Sicherheitsausrüstung, bedienen fachmännisch diese schweren Maschinen. Komplett mit unverzichtbaren Baustellen-Accessoires wie Verkehrshütchen und einem simulierten Steinhaufen, ist dieses Set für unendlichen fantasievollen Spielspaß konzipiert und eine beeindruckende Bereicherung für jede LEGO City Landschaft.
Teile-Inventar
| Teil | Farbe | Anz. |
|---|---|---|
![]() Brick 2 x 2 Corner 2357 | Schwarz | 4× |
![]() Plate 2 x 2 Corner 2420 | Schwarz | 8× |
![]() Tile 1 x 4 with Groove 2431 | Schwarz | 6× |
![]() Tile Special 1 x 2 with Handle 2432 | Schwarz | 2× |
![]() Brick 2 x 4 3001 | Schwarz | 1× |
![]() Brick 1 x 2 3004 | Schwarz | 4× |
![]() Plate 2 x 3 3021 | Schwarz | 2× |
![]() Plate 2 x 2 3022 | Schwarz | 2× |
![]() Plate 4 x 8 3035 | Schwarz | 1× |
![]() Plate Special 3 x 2 with Rounded End, Hole 3176 | Schwarz | 4× |
10 von 368 Teilen angezeigt
🔓 Melde dich an um alle Teile zu sehen| Brick 1 x 2 | 3004 | Schwarz | 4× |
| Plate 2 x 3 | 3021 | Schwarz | 2× |
| Plate 2 x 2 | 3022 | Schwarz | 2× |
| Plate 4 x 8 | 3035 | Schwarz | 1× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Schwarz | 4× |
| Plate 1 x 6 | 3666 | Schwarz | 5× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Schwarz | 3× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Schwarz | 2× |
| Plate 2 x 6 | 3795 | Schwarz | 3× |
| PLATE 2X2 ROUND | 4032 | Schwarz | 2× |
| Seat / Chair 2 x 2 | 4079 | Rotbraun | 1× |
| Plate 2 x 16 | 4282 | Schwarz | 2× |
| ROOF TILE 1X3/25° INV. | 4287 | Schwarz | 2× |
| Tile 1 x 6 with Groove | 6636 | Schwarz | 4× |
| Panel 1 x 1 x 1 Corner | 6231 | Schwarz | 4× |
| ROOF TILE 1X2/45° | 3040 | Schwarz | 2× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Schwarz | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Schwarz | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Schwarz | 1× |
| Fence Lattice 1 x 4 x 2 | 3185 | Schwarz | 2× |
| Equipment Shovel [Rounded Handle End] | 3837 | Schwarz | 1× |
| Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs | 45677 | Schwarz | 1× |
| Plate Round Corner 3 x 3 | 30357 | Schwarz | 4× |
| Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | 56145 | Schwarz | 10× |
| Bar 1 x 4 x 3 [End Tabs] | 62113 | Schwarz | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Schwarz | 3× |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 85080 | Schwarz | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Schwarz | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Schwarz | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Schwarz | 4× |
| Slope Curved 4 x 1 Inverted | 13547 | Schwarz | 6× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Schwarz | 2× |
| Brick Curved 6 x 1 Inverted | 42023 | Schwarz | 6× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Schwarz | 3× |
| Plate Round 4X4 with Ø16mm hole | 28620 | Schwarz | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Schwarz | 3× |
| Plate Round 6 x 6 with Hole | 11213 | Schwarz | 1× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Schwarz | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Schwarz | 1× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Schwarz | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Schwarz | 4× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Schwarz | 4× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Schwarz | 4× |
| Equipment Candlestick | 37762 | Schwarz | 2× |
| Tile Special 2 x 2 with Top Pin [Squared Holes] | 49153 | Schwarz | 6× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Schwarz | 2× |
| CHAIN 6 M | 39890 | Schwarz | 2× |
| FLAT TILE 1X2, NO. 308 | 73893 | Schwarz | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Schwarz | 8× |
| FRAME 1X2X2 | 79128 | Schwarz | 1× |
| Wedge Sloped 45° 3 x 3 Left | 42862 | Schwarz | 1× |
| Wedge Sloped 45° 3 x 3 Right | 48165 | Schwarz | 1× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Schwarz | 1× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Schwarz | 8× |
| Equipment Cleaver, 2 Holes | 79811 | Schwarz | 2× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Schwarz | 6× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Schwarz | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Schwarz | 2× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Schwarz | 2× |
| Plate 3 x 3 Corner | 77844 | Schwarz | 4× |
| BRICK 4X6, W/ 4.85 HOLE, CUT OUT | 1679 | Schwarz | 1× |
| Slope Inverted 45° 6 x 8 Double with Pin Holes on Sides | 5117 | Schwarz | 2× |
| Wedge Sloped 2 x 5 Right | 3505 | Schwarz | 1× |
| Wedge Sloped 2 x 5 Left | 3504 | Schwarz | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Schwarz | 1× |
| Tyre 49.53 x 20 | 15413 | Schwarz | 10× |
| LEFT SHELL 2X10X2, OUTSIDE BOW, W/ CUT | 4581 | Schwarz | 1× |
| RIGHT SHELL 2X10X2, OUTSIDE BOW, W/ CUT | 4308 | Schwarz | 1× |
| Slope 45° 2 x 4 with 2/3 Inverted Cutout and no Studs | 5540 | Schwarz | 3× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Schwarz | 4× |
| Slope 1 x 4 with 1 x 2 Cutout | 5654 | Schwarz | 2× |
| Slope 30° 1 x 4 x 2/3 | 7835 | Dunkelblaugrau | 1× |
| Technic Beam 1 x 5 Thick | 32316 | Schwarz | 2× |
| Technic Axle Connector Double Flexible [Rubber] | 45590 | Schwarz | 1× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Schwarz | 2× |
| STEERING GEAR, 9 MODULE | 35257 | Schwarz | 2× |
| BEAM 3M Ø4.85 W. FORK | 49137 | Schwarz | 1× |
| CROSS BLOCK/FORM 2X2X2 | 42193 | Schwarz | 1× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Schwarz | 24× |
| TECHNIC CROSS BLOCK 2X1 | 42163 | Schwarz | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Schwarz | 2× |
| Technic Beam 2 x 3 L-Shape with Quarter Ellipse Thick | 71708 | Schwarz | 2× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 44874 | Schwarz | 2× |
| Fric. element, cylinder | 65443 | Schwarz | 3× |
| Flexible Ribbed Hose 8mm Ends 10L | 27328 | Schwarz | 2× |
| BRICK 1X2X2 | 3245 | Sandfarben | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Sandfarben | 2× |
| Plate 3 x 3 | 11212 | Sandfarben | 4× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Sandfarben | 1× |
| Brick 2 x 2 | 3003 | Dunkellila | 6× |
| Brick 1 x 2 | 3004 | Dunkellila | 3× |
| Brick 1 x 1 | 3005 | Trans-dunkelblau | 16× |
| Brick 1 x 6 | 3009 | Dunkelblau | 8× |
| Brick 1 x 4 | 3010 | Dunkellila | 3× |
| Slope Inverted 45° 2 x 1 | 3665 | Dunkelblau | 4× |
| Brick 2 x 2 Corner | 2357 | Dunkellila | 16× |
| FRAME 1X4X6 | 40289 | Dark Blue-Violet | 1× |
| BRICK 1X2 W. HORIZONTAL HOLDER | 42925 | Dark Blue-Violet | 5× |
| Panel 1 x 6 x 5 | 59349 | Dunkelblau | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Schwarz | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Schwarz | 9× |
| ELEMENT SEPARATOR | 31510 | Orange | 1× |
| CARROT | 3342 | Orange | 1× |
| Brick 2 x 4 | 3001 | Rot | 1× |
| Brick 2 x 2 | 3003 | Rot | 1× |
| Plate 2 x 2 | 3022 | Rot | 2× |
| Plate 1 x 1 | 3024 | Rot | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Rot | 3× |
| Plate 1 x 4 | 3710 | Rot | 6× |
| Plate Special 1 x 2 with Door Rail | 32028 | Rot | 9× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Rot | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Rot | 1× |
| Plate Round Corners 2 x 6 Double | 18980 | Rot | 1× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Rot | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Rot | 2× |
| PLATE 1X2 W. VERTICAL SCHAFT | 43876 | Rot | 1× |
| PLATE 1X2 W. 1 HORIZONTAL SNAP | 65458 | Rot | 2× |
| Tile 2 x 6 | 69729 | Rot | 1× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Rot | 6× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Rot | 2× |
| MINI HAT NO. 14 WITH HAIR | 90809 | Rot | 1× |
| Technic Axle 2 Notched | 32062 | Rot | 7× |
| Technic Axle 4 | 3705 | Rot | 3× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Rot | 2× |
| TECHNIC ANG. BEAM 4X2 90 DEG | 42137 | Rot | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rot | 4× |
| Technic Pin 1/2 with Friction | 89678 | Rot | 22× |
| Equipment Cup / Mug [Plain] | 3899 | Gelb | 1× |
| Plant, Banana | 33085 | Gelb | 1× |
| MINI HEAD, NO. 2463 | 36346 | Gelb | 1× |
| MINI HEAD, NO. 3361 | 73906 | Gelb | 1× |
| MINI HEAD, NO. 2589 | 38300 | Gelb | 1× |
| Brick 1 x 4 | 3010 | Limette | 3× |
| Brick Special 1 x 1 with Headlight | 4070 | Limette | 2× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Schwarz | 1× |
| Plant, Plate 1 x 1 Round with 3 Leaves | 32607 | Hellblaugrau | 1× |
| Radiator Grille 1x2 | 2412 | Dunkelblaugrau | 3× |
| Brick Special 1 x 2 with Grille | 2877 | Dunkelblaugrau | 2× |
| Plate 2 x 10 | 3832 | Dunkelblaugrau | 3× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Dunkelblaugrau | 2× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Dunkelblaugrau | 2× |
| Plate 2 x 6 | 3795 | Dunkelblaugrau | 5× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Dunkelblaugrau | 1× |
| Tile Special 1 x 2 with Handle | 2432 | Dunkelblaugrau | 6× |
| PLATE 2X2 ROUND | 4032 | Dunkelblaugrau | 10× |
| Plate 2 x 3 | 3021 | Dunkelblaugrau | 3× |
| Tile 1 x 4 with Groove | 2431 | Dunkelblaugrau | 3× |
| Plate 1 x 6 | 3666 | Dunkelblaugrau | 2× |
| Brick 2 x 4 | 3001 | Dunkelblaugrau | 6× |
| Slope Inverted 45° 2 x 1 | 3665 | Dunkelblaugrau | 2× |
| Brick 1 x 1 | 3005 | Dunkelblaugrau | 2× |
| Brick 1 x 8 | 3008 | Dunkelblaugrau | 2× |
| Plate 4 x 10 | 3030 | Dunkelblaugrau | 2× |
| Plate 1 x 3 | 3623 | Dunkelblaugrau | 8× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Dunkelblaugrau | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Dunkelblaugrau | 2× |
| Plate 1 x 10 | 4477 | Dunkelblaugrau | 2× |
| Tool Jackhammer / Motor Hammer | 30228 | Dunkelblaugrau | 1× |
| Tile 2 x 4 with Groove | 87079 | Dunkelblaugrau | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Dunkelblaugrau | 1× |
| Wedge 2 x 2 Facet | 87620 | Dunkelblaugrau | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Dunkelblaugrau | 2× |
| Slope Curved 4 x 2 No Studs | 93606 | Dunkelblaugrau | 3× |
| Plate 3 x 3 | 11212 | Dunkelblaugrau | 6× |
| Tile Round 2 x 2 with Hole | 15535 | Dunkelblaugrau | 10× |
| FLAT TILE 2X2 ROUND W/ HOLE Ø4.85 NO. 1 | 21605 | Dunkelblaugrau | 1× |
| PLATE 2X2 W 1 KNOB | 23893 | Dunkelblaugrau | 3× |
| Tile 6 x 6 with Bottom Tubes | 10202 | Dunkelblaugrau | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Dunkelblaugrau | 10× |
| Hinge Brick 1 x 2 Top Plate Thin | 3938 | Dunkelblaugrau | 6× |
| Slope Curved 4 x 1 Inverted | 13547 | Dunkelblaugrau | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Dunkelblaugrau | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Dunkelblaugrau | 3× |
| PLATE 1X2 W. VERTICAL SCHAFT | 43876 | Dunkelblaugrau | 1× |
| PLATE 1X2 W/STUB VERTICAL/END | 49715 | Dunkelblaugrau | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Dunkelblaugrau | 2× |
| WALL DOUBLE CORNER 1X2X1 | 35391 | Dunkelblaugrau | 8× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Dunkelblaugrau | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Dunkelblaugrau | 4× |
| SHAFT 3M Ø3.2 | 17715 | Dunkelblaugrau | 4× |
| Tile 2 x 6 | 69729 | Dunkelblaugrau | 2× |
| Tile Special 2 x 3 with 2 Clips without Tab between Clips | 65886 | Dunkelblaugrau | 4× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Dunkelblaugrau | 4× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Dunkelblaugrau | 1× |
| Plate Round Corners 2 x 6 Double | 18980 | Dunkelblaugrau | 2× |
| Slope Curved 2 x 2 with Lip, No Studs | 30602 | Dunkelblaugrau | 4× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Dunkelblaugrau | 2× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Dunkelblaugrau | 1× |
| MINI LOWER PART, NO. 2676 | 107562 | Dunkelblaugrau | 3× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Dunkelblaugrau | 1× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Dunkelblaugrau | 2× |
| Technic Axle 8 with Stop | 55013 | Dunkelblaugrau | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Dunkelblaugrau | 6× |
| Technic Axle 4 with Stop | 87083 | Dunkelblaugrau | 13× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Dunkelblaugrau | 2× |
| ANGLE ELEMENT, 0 DEGREES [1] | 42127 | Dunkelblaugrau | 2× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Dunkelblaugrau | 1× |
| Tile 2 x 4 with Groove | 87079 | Schwarz | 2× |
| Brick 1 x 4 | 3010 | Schwarz | 2× |
| Plate 2 x 2 | 3022 | Schwarz | 3× |
| Plate 1 x 4 | 3710 | Schwarz | 16× |
| FLAT TILE 2X2 | 3068 | Schwarz | 2× |
| Slope 45? 2 x 2 | 3039 | Schwarz | 2× |
| ROOF TILE 1X2/45° | 3040 | Schwarz | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Schwarz | 2× |
| Plate 1 x 2 | 3023 | Schwarz | 6× |
| Brick 1 x 1 | 3005 | Schwarz | 4× |
| Tile 1 x 4 with Groove | 2431 | Schwarz | 5× |
| Plate 1 x 1 | 3024 | Schwarz | 6× |
| Plate 1 x 3 | 3623 | Schwarz | 2× |
| Plate 2 x 6 | 3795 | Schwarz | 3× |
| Plate 2 x 4 | 3020 | Schwarz | 4× |
| Plate 2 x 2 Corner | 2420 | Schwarz | 2× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Schwarz | 2× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Schwarz | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Schwarz | 1× |
| Wedge Plate 2 x 2 Left | 24299 | Schwarz | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Schwarz | 2× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Schwarz | 2× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Schwarz | 2× |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Schwarz | 4× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Schwarz | 2× |
| Tile 1 x 8 with Groove | 4162 | Schwarz | 4× |
| Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs | 45677 | Schwarz | 2× |
| Slope Curved 8 x 2 No Studs | 42918 | Schwarz | 1× |
| Slope 33° 2 x 2 Double / Inverted | 1762 | Schwarz | 4× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Schwarz | 4× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Schwarz | 4× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Schwarz | 6× |
| Slope 45° 2 x 4 with 2/3 Inverted Cutout and no Studs | 5540 | Schwarz | 4× |
| Door 1 x 3 x 1 Right | 3821 | Schwarz | 1× |
| Door 1 x 3 x 1 Left | 3822 | Schwarz | 1× |
| FLAT TILE 2X2, NO. 820 | 116665 | Schwarz | 6× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Schwarz | 2× |
| MINI UPPER PART, NO. 6870 | 76382 | Dunkelblaugrau | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Schwarz | 2× |
| Brick 1 x 6 | 3009 | Schwarz | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Schwarz | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Schwarz | 1× |
| BRICK 1X2X2 | 3245 | Medium Azur | 2× |
| Cupboard 2 x 3 x 5 | 2656 | Orange | 1× |
| FLAT TILE 1X2, NO. 502 | 115971 | Medium Azur | 2× |
| FLAT TILE 1X1, ROUND NO. 56 | 26819 | Pearl Very Light Gray | 1× |
| Plate 1 x 6 | 3666 | Hellblaugrau | 2× |
| Plate 2 x 6 | 3795 | Hellblaugrau | 1× |
| FLAT TILE 1X4, NO. 156 | 73797 | Pearl Very Light Gray | 2× |
| Brick 2 x 4 | 3001 | Hellblaugrau | 1× |
| Plate 2 x 4 | 3020 | Hellblaugrau | 5× |
| Plate 1 x 2 | 3023 | Hellblaugrau | 8× |
| Plate 4 x 12 | 3029 | Hellblaugrau | 2× |
| Plate 4 x 8 | 3035 | Hellblaugrau | 2× |
| FLAT TILE 1X2 | 3069 | Hellblaugrau | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Hellblaugrau | 5× |
| Plate 1 x 8 | 3460 | Hellblaugrau | 4× |
| Plate 1 x 4 | 3710 | Hellblaugrau | 3× |
| Plate 2 x 6 | 3795 | Hellblaugrau | 2× |
| Hinge Brick 1 x 4 [Lower] | 3831 | Hellblaugrau | 2× |
| Plate 2 x 10 | 3832 | Hellblaugrau | 4× |
| Plate 2 x 16 | 4282 | Hellblaugrau | 1× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Hellblaugrau | 10× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Hellblaugrau | 4× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Hellblaugrau | 2× |
| CONSOLE W. WHEEL GREY/BLACK | 73081 | Hellblaugrau | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Hellblaugrau | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Hellblaugrau | 7× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Hellblaugrau | 1× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Hellblaugrau | 1× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Hellblaugrau | 2× |
| PLATE 2X2 W 1 KNOB | 23893 | Hellblaugrau | 2× |
| Window 1 x 4 x 3 without Shutter Tabs | 60594 | Hellblaugrau | 1× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Hellblaugrau | 4× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Hellblaugrau | 6× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Hellblaugrau | 2× |
| FRAME 1X4X6 | 40289 | Hellblaugrau | 1× |
| PLATE 1X2 W/STUB/ALONG/UPPER P | 53922 | Hellblaugrau | 2× |
| PLATE 1X4 W. BALL SOCKET | 49422 | Hellblaugrau | 1× |
| Tile Special 2 x 2 with Top Pin [Squared Holes] | 49153 | Hellblaugrau | 4× |
| BRICK 1X1 W/ HOLDER, VERTICAL | 65459 | Hellblaugrau | 1× |
| HINGE 1X2 UPPER PART | 65122 | Hellblaugrau | 2× |
| FLAT TILE 1X1, NO. 234 | 73777 | Hellblaugrau | 1× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Hellblaugrau | 1× |
| BRICK 2X2 ROUND W/ HOLE Ø4,85 | 79566 | Hellblaugrau | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Hellblaugrau | 12× |
| FRAME 1X2X3 | 3662 | Hellblaugrau | 2× |
| Technic Pin 1/2 | 4274 | Hellblaugrau | 4× |
| BUSH FOR CROSS AXLE | 42798 | Hellblaugrau | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Hellblaugrau | 4× |
| TOOTHED BAR M=1, Z=10 | 4296 | Hellblaugrau | 2× |
| Technic Pin Connector Hub with 3L Axle | 5713 | Hellblaugrau | 2× |
| HELMET, NO. 68 | 18899 | Schwarz | 1× |
| Equipment Brush / Push Broom | 3836 | Rotbraun | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Schwarz | 2× |
| Plate 2 x 3 | 3021 | Schwarz | 1× |
| Plate 1 x 4 | 3710 | Schwarz | 2× |
| Brick 2 x 2 | 3003 | Schwarz | 1× |
| Tile Special 1 x 2 with Handle | 2432 | Schwarz | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Schwarz | 4× |
| Plate 2 x 2 | 3022 | Schwarz | 2× |
| Plate 1 x 6 | 3666 | Schwarz | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Schwarz | 1× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Schwarz | 3× |
| PLATE 1x2 W. HORIZONTAL HOLE Ø4,85 REV. | 28809 | Rotbraun | 4× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Schwarz | 1× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Rotbraun | 2× |
| 1X1 DECORATION TOP, NO. 2 | 3441 | Rotbraun | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Schwarz | 3× |
| Technic Pin Connector 3L with 2 Pins and Center Hole [Pin Ridges Across Part] | 46189 | Schwarz | 2× |
| MINI UPPER PART, NO. 6870 | 76382 | Dunkelblaugrau | 1× |
| MINI UPPER PART, NO. 6870 | 76382 | Dunkelblaugrau | 1× |
| Wedge 2 x 2 Facet | 87620 | Dunkel sandfarben | 4× |
| Plate 2 x 3 | 3021 | Dunkel sandfarben | 5× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Dunkel sandfarben | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Dunkel sandfarben | 2× |
| Plate Special 4 x 6 with Studs on 3 Edges | 6180 | Dunkel sandfarben | 1× |
| ROCK 4X4X1 2/3 LOWER PART | 42291 | Dunkel sandfarben | 2× |
| ROCK 4X4X1 1/3 UPPER PART | 42284 | Dunkel sandfarben | 2× |
| CROSS AXLE 4.5 MODULE, W/ STOP 1 MODULE | 7784 | Dunkel sandfarben | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Schwarz | 3× |
| Tool Screwdriver and Spanner / Wrench | 4006 | Schwarz | 1× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Silver Metallic | 2× |
| ROOF TILE 1X1X2/3 | 35338 | Trans-durchsichtig | 4× |
| WINDSCREEN 2X4X2 | 35160 | Trans-durchsichtig | 2× |
| Door 3 x 5 | 2657 | Trans-durchsichtig | 1× |
| WINDSCREEN 4X3X3, W/ SHARP EDGE | 35193 | Trans-durchsichtig | 1× |
| WALL ELEMENT 1X2X1 | 35293 | Trans-durchsichtig | 2× |
| GLASS FOR FRAME 1X4X3 | 35318 | Trans-durchsichtig | 1× |
| FLAT TILE 1X1, ROUND | 35380 | Trans-durchsichtig | 6× |
| Brick 1x1 w/ Studs on 2 Sides | 35382 | Trans-durchsichtig | 2× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Trans-durchsichtig | 2× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Trans-durchsichtig | 2× |
| GLASS FOR FRAME 1X2X3 | 35287 | Trans-durchsichtig | 2× |
| WINDSCREEN 2X4X2 | 35260 | Trans-durchsichtig | 1× |
| DIAMOND WITH STICK | 28556 | Schwarz | 1× |
| Dome 1 x 1 x 2/3 | 6908 | Schwarz | 2× |
| ROCK CRYSTAL, TRANSPARENT | 28623 | Trans-lila | 2× |
| ROUND BRICK 1X1 | 35390 | Trans-neongrün | 1× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Trans-durchsichtig | 1× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Trans-durchsichtig | 1× |
| PLATE 1X2 | 28653 | Trans-hellblau | 7× |
| FLAT TILE 1X1, ROUND | 35380 | Trans-hellblau | 2× |
| TAP Ø4.9/6.4 | 4599 | Medium Lime | 1× |
| Brick 2 x 4 | 3001 | Weiß | 1× |
| Plate 2 x 2 | 3022 | Weiß | 1× |
| Plate 1 x 2 | 3023 | Weiß | 9× |
| FLAT TILE 1X1 | 3070 | Weiß | 2× |
| Plate 1 x 6 | 3666 | Weiß | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Weiß | 3× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Weiß | 1× |
| Plate Special 1 x 2 with Door Rail | 32028 | Weiß | 2× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Weiß | 3× |
| Brick Round 2 x 2 Dome Bottom [Open Stud] | 15395 | Weiß | 1× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Weiß | 2× |
| FLAT TILE 2X2, NO. 364 | 37475 | Weiß | 1× |
| GLASS DOOR FÜR FRAME 1X4X6 | 35291 | Weiß | 1× |
| PLATE 2X2 ANGLE | 35262 | Weiß | 4× |
| FLAT TILE 2X2, ROUND, NO. 1172 | 73806 | Weiß | 1× |
| FLAT TILE 1X2, NO. 376 | 103172 | Weiß | 1× |
| FLAT TILE 2X2, NO. 715 | 107567 | Weiß | 2× |
| FLAT TILE 1X1, NO. 315 | 109405 | Weiß | 8× |
| KITCHEN EQUIPMENT, NO. 9 | 3576 | Weiß | 1× |
| 1/2 BUSH | 42136 | Weiß | 16× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Weiß | 2× |
| Technic Panel Fairing 2 x 1 x 1 | 89679 | Weiß | 1× |
Bau-DNA
Teile-Einblicke fur Dump Truck & Front End Loader
Mit 1.131 Teilen liegt dieser Build +271% gegenuber dem durchschnittlichen City Set und +81% gegenuber der durchschnittlichen Veroffentlichung aus 2026.
Im Vergleich zum durchschnittlichen City Set
Durchschnittliches City Set: 305 Teile uber 739 andere Sets.
Im Vergleich zum durchschnittlichen Set von 2026
Durchschnittliches Set von 2026: 626 Teile uber 427 andere Sets.
Farbprofil
Dominante Farbe
Schwarz
Einzigartige Teile
4 Teile pro einzigartigem Typ
Wiederholungsfaktor
Durchschnittliche Teile pro einzigartigem Typ.
Meistgenutztes Teil
Plate 1 x 4
27xErgebnisse basieren auf offiziellen LEGO-Teileinventaren. Die Genauigkeit verbessert sich wenn du Set-Vollständigkeit bestätigst.
Diese Seite ist nicht mit der LEGO Gruppe verbunden oder von ihr genehmigt.









