Wie viele Teile hat das LEGO Ultra Dragon Battle (71872-1)?

Das LEGO Ultra Dragon Battle Set (71872-1) enthält 2177 Teile. Es wurde 2026 veröffentlicht als Teil des LEGO Ninjago Themas.

Wie finde ich fehlende Teile für LEGO Set 71872-1?

Auf BrickMissing kannst du prüfen, welche Teile des LEGO Ultra Dragon Battle (71872-1) du bereits besitzt. Füge deine LEGO-Sammlung hinzu und wir zeigen dir genau, welche der 2177 Teile dir fehlen und welche du bereits hast.

Kann ich das LEGO Ultra Dragon Battle mit Teilen bauen, die ich bereits habe?

Nutze BrickMissings kostenlosen Teile-Checker, um es herauszufinden. Füge LEGO-Sets, die du besitzt, zu deiner Sammlung hinzu und wir vergleichen alle 2177 Teile, um deinen Baubarkeits-Prozentsatz und die spezifisch fehlenden Teile anzuzeigen.

Zu welchem Thema gehört das LEGO Ultra Dragon Battle?

Das LEGO Ultra Dragon Battle (71872-1) gehört zum LEGO Ninjago Thema. Du kannst alle Ninjago Sets auf BrickMissing durchsuchen, um weitere Sets dieses Themas zu finden.

Ultra Dragon Battle

🏷️ 71872-1•🎨 Ninjago•📅 2026•🧱 2177 Teile•Experte

LEGO NINJAGO 71872-1 Ultra Dragon Battle stellt den finalen Kampf aus der NINJAGO Legends Handlung Duskfall nach. Ein 4-kopfiger Drache tritt gegen den Verschlinger an, der aus dem Boden auftaucht. Der Drache kann vom Sockel genommen werden, und bewegliche Kopfe, Halse, Kiefer, Schwanz und Flugel sorgen fur Action. Jin, Mira, Nate und ein Oni-General geben der Szene ihre Figuren.

Teile-Inventar

🧱 2177 Teile

Teil	Farbe	Anz.
Plate 2 x 2 Corner 2420	Schwarz	2×
Tile 1 x 4 with Groove 2431	Schwarz	4×
Brick 2 x 4 3001	Schwarz	2×
Brick 2 x 3 3002	Schwarz	1×
Brick 2 x 2 3003	Schwarz	1×
Brick 1 x 2 3004	Schwarz	1×
Brick 1 x 1 3005	Schwarz	2×
Brick 1 x 4 3010	Schwarz	2×
Plate 2 x 4 3020	Schwarz	6×
Plate 2 x 8 3034	Schwarz	1×

10 von 558 Teilen angezeigt

🔓 Melde dich an um alle Teile zu sehen

Brick 1 x 2	3004	Schwarz	1×
Brick 1 x 1	3005	Schwarz	2×
Brick 1 x 4	3010	Schwarz	2×
Plate 2 x 4	3020	Schwarz	6×
Plate 2 x 8	3034	Schwarz	1×
Plate 4 x 8	3035	Schwarz	1×
FLAT TILE 2X2	3068	Schwarz	2×
Plate Special 3 x 2 with Rounded End, Hole	3176	Schwarz	1×
Brick 1 x 3	3622	Schwarz	4×
Plate 1 x 3	3623	Schwarz	2×
Technic Brick 1 x 4 [3 Pin Holes]	3701	Schwarz	2×
Technic Brick 1 x 8 [7 Pin Holes]	3702	Schwarz	2×
Plate 1 x 4	3710	Schwarz	2×
PLATE 2X2 ROUND	4032	Schwarz	1×
Plate 1 x 10	4477	Schwarz	4×
Wedge Curved 6 x 2 Left, Inner Ridges	41748	Schwarz	1×
Wedge Plate 4 x 2 Right	41769	Schwarz	2×
Wedge Plate 4 x 2 Left	41770	Schwarz	2×
Wedge Plate 3 x 2 Right	43722	Schwarz	2×
Wedge Plate 3 x 2 Left	43723	Schwarz	2×
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction	47455	Schwarz	4×
Plate Round Corner 3 x 3	30357	Schwarz	2×
Slope Curved 3 x 1 No Studs	50950	Schwarz	4×
Wedge Plate 8 x 3, 22° Right	50304	Schwarz	1×
Wedge Plate 8 x 3, 22° Left	50305	Schwarz	1×
Plate Special 1 x 1 with Tooth	49668	Schwarz	2×
Slope 30° 1 x 1 x 2/3 (Cheese Slope)	54200	Schwarz	4×
Slope 18° 4 x 1	60477	Schwarz	4×
Slope 30? 1 x 2 x 2/3	85984	Schwarz	1×
Tile 2 x 4 with Groove	87079	Schwarz	2×
Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes	88930	Schwarz	2×
Plate Special 1 x 2 with Angled Handles on Side	92692	Schwarz	2×
Slope Curved 4 x 1 Double with No Studs	93273	Schwarz	1×
Slope Curved 4 x 2 No Studs	93606	Schwarz	1×
Bracket 1 x 2 - 2 x 2 Inverted	99207	Schwarz	33×
Wedge Curved 4 x 3 No Studs [Plain]	64225	Schwarz	1×
Tile Special 2 x 2 Inverted	11203	Schwarz	8×
Bracket 1 x 2 - 1 x 2 Inverted	99780	Schwarz	10×
BRICK 2X8	93888	Schwarz	1×
Slope Curved 4 x 1 Inverted	13547	Schwarz	16×
Slope Curved 2 x 1 No Studs [1/2 Bow]	11477	Schwarz	4×
Slope 45° 2 x 1 Triple with Inside Stud Holder	15571	Schwarz	12×
Slope Curved 2 x 2 x 2/3	15068	Schwarz	3×
Slope 45? 2 x 1 with 2/3 Cutout [New Version]	15672	Schwarz	6×
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)	15573	Schwarz	2×
Bracket 1 x 2 - 2 x 2	21712	Schwarz	2×
ANGLE PLATE 1X2 / 2X4	21731	Schwarz	2×
Tile Round 2 x 2 with Hole	15535	Schwarz	1×
Slope Curved 2 x 1 Inverted	24201	Schwarz	2×
Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]	99563	Schwarz	7×
Plate Special 1 x 1 Rounded with Handle	26047	Schwarz	4×
Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]	28802	Schwarz	2×
ANG.BRICK 5X5, Ø4,85	28973	Schwarz	4×
Tile Round 1 x 1 Quarter	25269	Schwarz	4×
Plate Special 1 x 1 with Vertical Tooth	15070	Schwarz	2×
Wedge Plate 2 x 2 Cut Corner	26601	Schwarz	4×
Plate Special 1 x 2 Rounded with 2 Open Studs	35480	Schwarz	4×
Weapon Harpoon [Smooth Shaft]	18041	Schwarz	4×
Slope Curved 2 x 2 x 2/3 Inverted	32803	Schwarz	10×
FLAT TILE 2X3 W/ ANGLE	35341	Schwarz	3×
Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Top	43045	Schwarz	1×
PLATE 1X2 W. STUB/VERTICAL	49716	Schwarz	4×
Tile Special 1 x 3 Inverted with Center Hole	35459	Schwarz	10×
PLATE 4X4 W/ANGLE	41822	Schwarz	2×
BAD ROBOT ARM	49753	Schwarz	6×
LAMP HOLDER	41632	Schwarz	2×
Bracket 1 x 1 - 1 x 1	36841	Schwarz	4×
Slope Curved 4 x 3 with 3 Layers, 1 x 3 Cutout on Underside	66955	Schwarz	1×
BRICK 2X2 Ã˜4.85 VERTIC. SNAP	48454	Schwarz	3×
PLATE 1X2 W/HOLDER, VERTICAL	49563	Schwarz	1×
3.2 SHAFT W/3.2 HOLE	49755	Schwarz	2×
Brick Curved, 3 x 1 with 1/3 Inverted Cutout	70681	Schwarz	4×
Weapon Hilt Symmetric	66909	Schwarz	1×
PLATE 2X1 W/HOLDER,VERTICAL	42923	Schwarz	4×
Wedge Plate 6 x 2 Left	78443	Schwarz	1×
Wedge Plate 6 x 2 Right	78444	Schwarz	1×
Plate Special 1 x 2 [Open O Top Clip]	44861	Schwarz	6×
Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes	67696	Schwarz	2×
Bracket 1 x 1 - 1 x 2	79389	Schwarz	22×
Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End	47457	Schwarz	3×
Plate Special 1 x 2 with 2 End Towballs	3170	Schwarz	1×
Animal Body Part, Horn Stacked 45 deg. with Axle Connectors	2142	Schwarz	1×
Plate 1 x 1 x 2/3 Half Round with Side Stud	3386	Schwarz	3×
Plate Special 1 x 4 Rounded with 2 Open Studs	77845	Schwarz	4×
ROOF TILE 3X4/25 DEG.	3016	Schwarz	8×
Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]	3484	Schwarz	2×
Plate 3 x 3 Corner	77844	Schwarz	2×
Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout	58846	Schwarz	4×
BRICK 4X6, W/ 4.85 HOLE, CUT OUT	1679	Schwarz	1×
Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder	86876	Schwarz	2×
Wedge Curved 6 x 2 Right, Smooth Inner Walls	5711	Schwarz	1×
2X1 ST.Ã˜4.9 HOLE W. HALF BEAM	49132	Schwarz	5×
Hat Conical Asian with Raised Center	26007	Schwarz	1×
Bracket 5 x 2 x 1 1/3 with Bottom Stud Holder	79180	Schwarz	1×
Slope Curved 3 x 1 x 2/3	7302	Schwarz	2×
Slope 30° 1 x 1 x 2/3 Double Corner	7826	Schwarz	6×
Brick Round Curved 1 x 1 x 1 Quarter Dome	5848	Schwarz	2×
BRICK 4X6 W/ BOW, W/ ANGLE	8132	Pearl Very Light Gray	1×
Technic Axle 4	3705	Schwarz	10×
Technic Axle 10	3737	Schwarz	2×
Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)	6553	Schwarz	4×
Technic Axle 2 Notched	32062	Schwarz	3×
Technic Ball Joint with Through Axle Hole	53585	Schwarz	2×
Technic Axle Connector Smooth [with x Hole + Orientation]	59443	Schwarz	6×
Technic Panel Fairing #14 Large Short Smooth, Side B	64680	Schwarz	1×
Technic Panel Fairing #13 Large Short Smooth, Side A	64394	Schwarz	1×
Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle	18651	Schwarz	2×
Technic Pin Connector Hub with 1 Axle	22961	Schwarz	2×
ANGLE ELEMENT, 157,5 DEGR. [3]	42128	Schwarz	8×
ANGLE ELEMENT, 112,5 DEGR. [5]	41488	Schwarz	2×
CROSS BLOCK 3M	42796	Schwarz	2×
CROSS BLOCK/FORM 2X2X2	42193	Schwarz	2×
Technic Pin with Friction Ridges Lengthwise with No Center Slots	61332	Schwarz	29×
Technic Tooth 1 x 3 with Axle Hole [Hollow Underside]	48267	Schwarz	4×
Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides	67695	Schwarz	4×
Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole	66906	Schwarz	12×
Technic Axle Connector Hub with 3 Axles at 120°	57585	Schwarz	4×
Technic Panel Triangle 5 x 4 Right	80274	Schwarz	1×
Technic Panel Triangle 5 x 4 Left	80278	Schwarz	1×
3 BRANCH CROSSHOLE W. HOLE	49155	Schwarz	4×
Technic Axle and Pin Connector Angled #7 - 168.75°	4450	Schwarz	2×
Brick 1 x 4	3010	Sandfarben	2×
Plate 4 x 6	3032	Sandfarben	1×
Plate 2 x 2	3022	Sandfarben	2×
ROUND BRICK 1X1	3062	Sandfarben	2×
Plate 2 x 3	3021	Sandfarben	3×
BRICK Ø16 W. CROSS	6143	Sandfarben	1×
PLATE 2X2 ROUND	4032	Sandfarben	5×
Brick Special 1 x 2 Palisade [aka Log]	30136	Sandfarben	4×
Plate 4 x 4	3031	Sandfarben	4×
Brick Arch 1 x 4	3659	Sandfarben	3×
Plate 16 x 16	91405	Sandfarben	1×
Plate Special 1 x 2 with Three Teeth [Tri-Tooth]	15208	Sandfarben	2×
Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End	47457	Sandfarben	3×
Horn with Shaft	88513	Sandfarben	4×
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium	87747	Sandfarben	2×
Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale)	71752	Sandfarben	2×
Tile 2 x 6	69729	Sandfarben	2×
PLATE 2X1 W/HOLDER,VERTICAL	42923	Sandfarben	8×
Plate 1 x 1 x 2/3 with Open Stud	86996	Sandfarben	2×
Turntable 2 x 2 Plate, Base	3680	Sandfarben	1×
Plate Round 1 x 1 with Hollow Stud and Underside Clip	5264	Sandfarben	1×
Technic Ball Joint with Through Axle Hole	53585	Sandfarben	2×
Brick 1 x 8	3008	Dunkelblau	3×
Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot	42924	Schwarz	6×
ELEMENT SEPARATOR	31510	Orange	1×
Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]	65304	Orange	8×
Brick 1 x 4	3010	Rot	1×
FLAT TILE 2X2	3068	Rot	1×
Plate 2 x 16	4282	Rot	8×
Plate Round 1 x 1 with Solid Stud	6141	Rot	14×
Tile Round 2 x 2 with Bottom Stud Holder	14769	Rot	2×
ANGLE PLATE 1X2 / 2X4	21731	Rot	2×
Plate Special 1 x 2 Rounded with 2 Open Studs	35480	Rot	5×
Plate Special 1 x 4 with 2 Studs with Groove [New Underside]	41740	Rot	2×
Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth	50340	Rot	4×
Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long	13564	Rot	1×
Plate 1 x 1 x 2/3 with Open Stud	86996	Rot	4×
3.2 SHAFT W/3.2 HOLE	49755	Rot	1×
Plate 3 x 3 Corner	77844	Rot	4×
Plate Special 1 x 1 with Hole Through Stud, 3 Bars and 3 Bar Holes	1941	Rot	2×
Technic Axle 2 Notched	32062	Rot	19×
Technic Axle Connector Smooth [with x Hole + Orientation]	59443	Rot	2×
Technic Pin Connector Round 1L [Beam]	18654	Rot	2×
Technic Axle 4	3705	Rot	2×
Technic Axle 6	3706	Rot	1×
Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls]	42195	Rot	2×
Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole	66906	Rot	4×
Technic Pin 1/2 with Friction	89678	Rot	8×
Plate 1 x 8	3460	Gelb	1×
Plate 2 x 6	3795	Gelb	1×
Technic Brick 1 x 2 [2 Pin Holes]	32000	Gelb	4×
Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End	47457	Gelb	4×
Plate Special 4 x 4 with 2 x 2 Opening	64799	Gelb	2×
Tile Round 2 x 2 with Bottom Stud Holder	14769	Gelb	2×
Brick 2 x 4	3001	Limette	3×
Brick 1 x 3	3622	Limette	10×
Plate 1 x 4	3710	Limette	4×
Plate 1 x 3	3623	Limette	3×
Plate 4 x 4	3031	Limette	3×
ROOF TILE 1X2/45Â°	3040	Limette	4×
Plate 2 x 4	3020	Limette	3×
Plate 2 x 6	3795	Limette	2×
Slope 45? 2 x 2	3039	Limette	2×
Plate 2 x 3	3021	Limette	4×
Plate Special 1 x 2 Rounded with 2 Open Studs	35480	Limette	10×
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium	87747	Limette	4×
PLATE 2X2 ROUND	4032	Limette	13×
Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]	28802	Limette	2×
ANGLE ELEMENT, 0 DEGREES [1]	42127	Limette	2×
Equipment Candlestick	37762	Sandfarben	2×
Brick Curved 2 x 3	6215	Hellblaugrau	2×
Plate 2 x 2 Corner	2420	Metallic Silber	5×
Wedge Plate 3 x 2 Left	43723	Hellblaugrau	3×
Wedge Plate 3 x 2 Right	43722	Hellblaugrau	3×
Bracket 1 x 2 - 1 x 2 Inverted	99780	Hellblaugrau	4×
Plate Special 1 x 2 Rounded with 2 Open Studs	35480	Hellblaugrau	3×
Wedge Plate 2 x 2 Left	24299	Hellblaugrau	2×
Wedge Plate 2 x 2 Right	24307	Hellblaugrau	2×
Bracket 1 x 1 - 1 x 2	79389	Hellblaugrau	2×
Bracket 1 x 1 - 1 x 1 Inverted	36840	Hellblaugrau	4×
Bracket 1 x 2 - 1 x 2	99781	Hellblaugrau	2×
Wedge Plate 3 x 3 Cut Corner	2450	Hellblaugrau	2×
Plate 2 x 10	3832	Dunkelblaugrau	4×
Wedge Plate 3 x 2 Right	43722	Dunkelblaugrau	3×
Wedge Plate 3 x 2 Left	43723	Dunkelblaugrau	3×
Plate 2 x 8	3034	Dunkelblaugrau	1×
Tile 1 x 4 with Groove	2431	Dunkelblaugrau	2×
Slope 45? 2 x 2	3039	Dunkelblaugrau	1×
Plate 1 x 6	3666	Dunkelblaugrau	3×
ROUND BRICK 1X1	3062	Dunkelblaugrau	4×
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]	2654	Dunkelblaugrau	4×
Wedge Plate 6 x 3 Left	54384	Dunkelblaugrau	1×
Wedge Plate 6 x 3 Right	54383	Dunkelblaugrau	1×
Slope 30° 1 x 1 x 2/3 (Cheese Slope)	54200	Dunkelblaugrau	7×
Plate Special 4 x 4 with Studs on One Edge [Plain]	6179	Dunkelblaugrau	2×
Plate Special 1 x 2 with 5.9mm Centre Side Towball	14417	Dunkelblaugrau	2×
Plate Special 1 x 2 with End Towball	22890	Dunkelblaugrau	12×
Plate Special 1 x 2 [Side Handle Closed Ends]	48336	Dunkelblaugrau	2×
Plate Special 1 x 2 5.9mm Centre Side Towball Socket	14704	Dunkelblaugrau	4×
Plate Special 4 x 4 with 2 x 2 Opening	64799	Dunkelblaugrau	1×
Tile 2 x 3	26603	Dunkelblaugrau	3×
Plate Special 1 x 2 Rounded with 2 Open Studs	35480	Dunkelblaugrau	3×
Plate Special / Shield Rectangular with 4 Studs, Handle	30166	Dunkelblaugrau	1×
PLATE 1X2 W. STUB/VERTICAL	49716	Dunkelblaugrau	4×
BRICK 2X2 Ã˜4.85 FEMALE	48370	Dunkelblaugrau	2×
PLATE 1X1 W. HOLDER	44860	Dunkelblaugrau	1×
Weapon Hilt Symmetric	66909	Dunkelblaugrau	1×
PLATE 2X4/2X2X1 W. VERTICAL SN	42194	Dunkelblaugrau	2×
Plate Special 2 x 2 with Only 2 studs	33909	Dunkelblaugrau	5×
Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder	73562	Dunkelblaugrau	2×
Brick Special 1 x 2 x 1 1/3 with Rotation Joint Socket	80431	Dunkelblaugrau	4×
Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]	3484	Dunkelblaugrau	2×
Plate 2x2 w. stump/top	53968	Dunkelblaugrau	1×
Tile 1 x 2 with Stud Notch Left	5091	Dunkelblaugrau	2×
Tile 1 x 2 with Stud Notch Right	5092	Dunkelblaugrau	2×
Brick Special 1 x 2 x 1 2/3 with 8 Studs on 2 Sides	80796	Dunkelblaugrau	2×
Slope Inverted 33° 3 x 2, Round Bottom Pin	2752	Dunkelblaugrau	1×
Technic Beam 1 x 2 with Ball Joint Angled	50923	Dunkelblaugrau	2×
Rotation Joint Socket with 2 Pins	80563	Dunkelblaugrau	2×
Technic Pin 1/2 with Friction	89678	Dunkelblaugrau	8×
Brick 1 x 4	3010	Schwarz	1×
Slope 30° 1 x 1 x 2/3 (Cheese Slope)	54200	Schwarz	12×
Brick 1 x 1	3005	Schwarz	2×
Plate 2 x 4	3020	Schwarz	9×
Slope Curved 2 x 1 No Studs [1/2 Bow]	11477	Schwarz	2×
Slope Curved 2 x 2 x 2/3	15068	Schwarz	10×
Slope 33° 3 x 1	4286	Schwarz	2×
Slope 30? 1 x 2 x 2/3	85984	Schwarz	10×
Slope Curved 2 x 1 with Stud Notch Right	29119	Schwarz	2×
Slope Curved 2 x 1 with Stud Notch Left	29120	Schwarz	2×
Plate 2 x 6	3795	Schwarz	2×
Slope Curved 2 x 2 x 2/3 Inverted	32803	Schwarz	1×
Tile Round 1 x 1 Quarter	25269	Schwarz	4×
Wedge Plate 3 x 3 Cut Corner	2450	Schwarz	2×
Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]	99563	Schwarz	3×
Tile 45° Cut 2 x 2 (Triangle)	35787	Schwarz	2×
Brick Curved, 3 x 1 with 1/3 Inverted Cutout	70681	Schwarz	4×
Plate Special 2 x 2 with Only 2 studs	33909	Schwarz	6×
Windscreen 6 x 4 x 1 Hexagonal with Handle	27262	Schwarz	2×
PLATE 1x2 W. HORIZONTAL HOLE Ã˜4,85 REV.	28809	Schwarz	1×
Tile Special 1 x 2 with Two Vertical Teeth / Tooth	15209	Schwarz	6×
Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle	5852	Schwarz	10×
Slope 45° 2 x 1 Triple with Inside Stud Holder	15571	Schwarz	6×
Tile Round 2 x 2 Half Circle	5520	Schwarz	1×
Plate Special 1 x 2 Rounded with 2 Open Studs	35480	Schwarz	7×
Plate Round 1 x 1 with Solid Stud	6141	Schwarz	10×
Plate 4 x 4	3031	Schwarz	1×
BRICK Ø16 W. CROSS	6143	Medium Azur	1×
Plate 2 x 3	3021	Schwarz	2×
Plate 1 x 2	3023	Schwarz	4×
Plate 1 x 3	3623	Schwarz	2×
Slope Curved 2 x 1 No Studs [1/2 Bow]	11477	Schwarz	6×
Brick 1 x 1	3005	Schwarz	2×
Bracket 1 x 2 - 2 x 2	21712	Schwarz	14×
Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]	99563	Schwarz	3×
Slope 45° 2 x 1 Inverted with 2/3 Cutout	2310	Schwarz	4×
RIGHT PANEL 2X5 (N0 21)	43499	Schwarz	1×
LEFT PANEL 2X5 (NR 22)	43500	Schwarz	1×
Tile Round 2 x 2 with Bottom Stud Holder	14769	Metallic Silber	3×
Tile Round 1 x 2	1126	Hellblaugrau	7×
Wedge Sloped 4 x 2 Triple Left	43710	Hellblaugrau	5×
Wedge Sloped 4 x 2 Triple Right	43711	Hellblaugrau	5×
Wedge Plate 3 x 3 Cut Corner	2450	Hellblaugrau	2×
Plate 1 x 2	3023	Hellblaugrau	6×
Plate 1 x 1	3024	Hellblaugrau	4×
FLAT TILE 1X1	3070	Hellblaugrau	6×
Plate 1 x 3	3623	Hellblaugrau	2×
Technic Brick 1 x 4 [3 Pin Holes]	3701	Hellblaugrau	5×
Technic Brick 1 x 8 [7 Pin Holes]	3702	Hellblaugrau	2×
PLATE 2X2 ROUND	4032	Hellblaugrau	4×
Brick Special 1 x 2 x 2/3 with Studs on Sides	4595	Hellblaugrau	1×
Technic Brick 1 x 2 [2 Pin Holes]	32000	Hellblaugrau	2×
Technic Brick 4 x 6 with 2 x 4 Opening	32531	Hellblaugrau	1×
BRICK 2X6	44237	Hellblaugrau	6×
Slope 45° 2 x 2 Double Convex	3045	Hellblaugrau	5×
Slope 30° 1 x 1 x 2/3 (Cheese Slope)	54200	Hellblaugrau	2×
Turntable 2 x 2 Plate - Top	3679	Hellblaugrau	1×
Brick Special 1 x 2 Palisade [aka Log]	30136	Hellblaugrau	3×
Brick Special 1 x 1 with Stud on 1 Side	87087	Hellblaugrau	2×
Slope 18° 4 x 1	60477	Hellblaugrau	3×
Brick Special 1 x 2 with 2 Studs on 1 Side	11211	Hellblaugrau	2×
Slope Curved 2 x 1 No Studs [1/2 Bow]	11477	Hellblaugrau	2×
Plate Special 1 x 2 5.9mm Towball Socket	14418	Hellblaugrau	10×
Plate Special 1 x 2 5.9mm Centre Side Towball Socket	14704	Hellblaugrau	6×
Slope Curved 2 x 2 x 2/3	15068	Hellblaugrau	2×
Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side	22885	Hellblaugrau	2×
PLATE 2X2 W 1 KNOB	23893	Hellblaugrau	1×
PL.ROUND 1X1 W. THROUGHG. HOLE	28626	Hellblaugrau	4×
Tile Special 2 x 2 Corner with Cut Corner - Facet	27263	Hellblaugrau	11×
Plate Special Round 2 x 2 with Center Stud (Jumper Plate)	18674	Hellblaugrau	1×
Wedge Plate 2 x 2 Cut Corner	26601	Hellblaugrau	3×
Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud	28192	Hellblaugrau	3×
Plate Special 1 x 2 Rounded with 2 Open Studs	35480	Hellblaugrau	8×
PLATE 1X1 W/3.2 SHAFT/1.5 HOLE	31561	Hellblaugrau	2×
FLAT TILE 1X1, ROUND	35381	Hellblaugrau	2×
Wedge Sloped 18° 4 x 4 Corner	43708	Hellblaugrau	3×
Wedge Sloped 45° 3 x 3 Left	42862	Hellblaugrau	3×
Wedge Sloped 45° 3 x 3 Right	48165	Hellblaugrau	3×
Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate	73109	Hellblaugrau	4×
Technic Brick 1 x 1 with Axle Hole	73230	Hellblaugrau	10×
Bracket 1 x 1 - 1 x 2 Inverted	73825	Hellblaugrau	8×
3 w.arch w.knob and shaft Ã¸3.2	42456	Hellblaugrau	2×
Bracket 1 x 1 - 1 x 2	79389	Hellblaugrau	2×
Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version	4304	Hellblaugrau	3×
Slope 18° 2 x 1 x 2/3	5404	Hellblaugrau	17×
Wedge Sloped 2 x 5 Right	3505	Hellblaugrau	1×
Wedge Sloped 2 x 5 Left	3504	Hellblaugrau	1×
Slope Curved 1 x 4 with Stud Notch Right	5414	Hellblaugrau	2×
Slope Curved 1 x 4 with Stud Notch Left	5415	Hellblaugrau	2×
Technic Pin Long 3l, No Friction Ridges, with Stop and Hole	77765	Hellblaugrau	2×
Technic Pin Connector Hub with 3L Axle	5713	Hellblaugrau	2×
Rotation Joint Disc with 2 Pins	6991	Hellblaugrau	2×
MINI ARMOUR, NO. 28	4923	Schwarz	1×
Slope 30° 1 x 1 x 2/3 (Cheese Slope)	54200	Schwarz	2×
Tile 1 x 8 with Groove	4162	Schwarz	1×
Plate 1 x 2	3023	Schwarz	8×
Plate 1 x 8	3460	Schwarz	1×
Plate 2 x 2	3022	Schwarz	2×
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)	15573	Schwarz	1×
Plate 2 x 3	3021	Schwarz	2×
Brick Curved, 3 x 1 with 1/3 Inverted Cutout	70681	Schwarz	2×
Plate 1 x 2	3023	Schwarz	6×
Plate 2 x 4	3020	Schwarz	3×
FLAT TILE 1X2	3069	Olive Green	5×
FLAT TILE 1X1, ROUND	35381	Olive Green	3×
Plant, Plate 1 x 1 Round with 3 Leaves	32607	Schwarz	4×
Tile 45° Cut 2 x 2 (Triangle)	35787	Schwarz	5×
Plate 1 x 3	3623	Schwarz	10×
PLATE 2X2 ROUND	4032	Rotbraun	3×
Plate Special 4 x 4 with 2 x 2 Opening	64799	Schwarz	1×
BRICK 2X10	92538	Rotbraun	1×
Plate Special 2 x 2 with Only 2 studs	33909	Schwarz	2×
PLATE 1X2 W. 1 HORIZONTAL SNAP	65458	Rotbraun	4×
Technic Brick 1 x 1 with Axle Hole	73230	Schwarz	2×
Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth	57360	Schwarz	1×
Plate Special 1 x 3 Rounded with 3 Open Studs	77850	Schwarz	2×
Slope 45° 2 x 1 Inverted with 2/3 Cutout	2310	Schwarz	2×
Technic Beam 1 x 3 Thick	32523	Schwarz	3×
Technic Axle 3 with Stop	24316	Rotbraun	1×
Plate 2 x 8	3034	Dunkel sandfarben	3×
Plate 2 x 4	3020	Dunkel sandfarben	2×
Plate 6 x 6	3958	Dunkel sandfarben	2×
Plate 1 x 4	3710	Dunkel sandfarben	8×
Wedge Plate 3 x 2 Left	43723	Dunkel sandfarben	5×
Wedge Plate 3 x 2 Right	43722	Dunkel sandfarben	5×
Plate 4 x 8	3035	Dunkel sandfarben	1×
Plate 1 x 6	3666	Dunkel sandfarben	3×
Wedge Plate 6 x 6 Cut Corner	6106	Dunkel sandfarben	2×
Plate 2 x 3	3021	Dunkel sandfarben	6×
Plate 6 x 10	3033	Dunkel sandfarben	1×
Plate Special Round 2 x 2 with Center Stud (Jumper Plate)	18674	Dunkel sandfarben	2×
Plate 4 x 4 Corner	2639	Dunkel sandfarben	2×
Tile 2 x 4 with Groove	87079	Dunkel sandfarben	18×
Wedge Plate 2 x 2 Cut Corner	26601	Dunkel sandfarben	8×
Bracket 1 x 2 - 1 x 2 Inverted	99780	Dunkel sandfarben	26×
Slope Curved 2 x 1 with Stud Notch Right	29119	Dunkel sandfarben	2×
Slope Curved 2 x 1 with Stud Notch Left	29120	Dunkel sandfarben	2×
Horn with Shaft	88513	Dunkel sandfarben	3×
Bracket 1 x 2 - 2 x 2	21712	Dunkel sandfarben	14×
Bracket 1 x 2 - 1 x 2	99781	Dunkel sandfarben	4×
Bracket 1 x 2 - 2 x 2 Inverted	99207	Dunkel sandfarben	16×
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]	2654	Dunkel sandfarben	2×
Tile Round 1 x 1 Quarter	25269	Dunkel sandfarben	4×
Wedge Plate 2 x 2 Left	24299	Dunkel sandfarben	5×
Wedge Plate 2 x 2 Right	24307	Dunkel sandfarben	5×
Tile 2 x 2 Curved, Macaroni	27925	Dunkel sandfarben	2×
Plate Special 2 x 3 with Rocks	27261	Dunkel sandfarben	6×
Plate 1x1 w/ 1.5 Hole	35344	Dunkel sandfarben	4×
Plate Special 1 x 2 with Three Teeth [Tri-Tooth]	15208	Dunkel sandfarben	10×
Slope 45° 2 x 1 Inverted with 2/3 Cutout	2310	Dunkel sandfarben	6×
PLATE 2X2 ROUND	4032	Dunkel sandfarben	2×
Plate Round Corner 2 x 2 with 1 x 1 Cutout	79491	Dunkel sandfarben	4×
Tile 45° Cut 2 x 2 (Triangle)	35787	Dunkel sandfarben	2×
Animal / Creature Body Part, Claw with Clip	3171	Dunkel sandfarben	2×
Bracket 1 x 1 - 1 x 2 Inverted	73825	Dunkel sandfarben	4×
Plate Special 1 x 2 with Clip Vertical on End	78256	Dunkel sandfarben	6×
Plate Special 1 x 1 with Tooth	49668	Dunkel sandfarben	2×
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Large	11089	Dunkel sandfarben	4×
CROSSAXLE 3M WITH KNOB	13670	Dunkel sandfarben	2×
ANGLE ELEMENT 135 DEG. [4]	42156	Dunkel sandfarben	2×
Horn with Shaft	88513	Silver Metallic	8×
Equipment Lantern	37776	Pearl Titanium	1×
Weapon Sword (Uruk-hai)	10050	Pearl Titanium	1×
PLATE 1X2 W/ SHAFT 12M	49546	Trans-durchsichtig	2×
Bar Curved with Axle End and 1 x 1 Round Plate	4042	Trans-durchsichtig	1×
PL.ROUND 1X1 W. THROUGHG. HOLE	29387	Trans-durchsichtig	2×
Bar, Angled with 1 x 1 Round Plate / Stud on End	65578	Trans-durchsichtig	6×
ROUND BRICK 1X1	35390	Trans-durchsichtig	4×
Plate Round 1 x 1 with Hollow Stud and Underside Clip	5264	Trans-durchsichtig	1×
ROOF TILE 1X1X2/3	35338	Schwarz	4×
PLATE 1X2	28653	Schwarz	15×
PLATE 1X1 ROUND	34823	Schwarz	9×
Parabolic Element D16	35395	Schwarz	1×
ROOF TILE 1X1X2/3	35338	Transparent Bright Orange	2×
BLADE, NO. 6	28683	Transparent Bright Orange	2×
PL.ROUND 1X1 W. THROUGHG. HOLE	29387	Transparent Bright Orange	2×
PLATE 1X2	28653	Transparent Bright Orange	2×
Wave / Lightning Angular, Single	27256	Trans-hellblau	2×
Curled Decorative Ornament with Bar	28870	Trans-neongrün	2×
ROOF TILE 1X1X2/3	35338	Trans-neongrün	5×
PLATE 1X2	28653	Trans-neongrün	2×
Nose Cone Small 1x1	28701	Trans-neongrün	2×
PLATE 1X1 W/TOOTH	35162	Trans-neongrün	3×
PLATE 1X2	28653	Schwarz	4×
PLATE 1X1 ROUND	34823	Schwarz	2×
PYRAMID RIDGED TILE 1X1X2/3	35343	Schwarz	2×
ROOF TILE 1X1X2/3	35338	Trans-hellblau	2×
AXE HEAD W HOLE Ã˜ 3.2	79805	Trans-hellblau	2×
PLATE 1X2	28653	Trans-hellblau	2×
KITCHEN EQUIPMENT, NO. 9	3576	Trans-hellblau	2×
Wave / Lightning Angular, Single	27256	Trans-dunkelpink	2×
ROOF TILE 1X1X2/3	35338	Schwarz	2×
PLATE 1X2	28653	Schwarz	2×
Plant, Flower, Peony Rose with 2 Layers	5904	Schwarz	1×
Plate Round 1 x 1 with Solid Stud	6141	Gelb	3×
Cone 1 x 1 [Top Groove]	59900	Gelb	4×
Plate Special 1 x 2 [Side Handle Closed Ends]	48336	Gelb	2×
Plate 1 x 1	3024	Gelb	4×
Slope 45° 2 x 1 Triple with Inside Stud Holder	15571	Gelb	9×
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]	21459	Limette	4×
Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]	99563	Gelb	4×
Plate Special 1 x 1 Rounded with Handle	26047	Gelb	2×
Plate 1 x 2	3023	Gelb	8×
Plate 1x1 with Up Right Holder	44842	Medium Lime	2×
Horn with Shaft	88513	Medium Lime	4×
Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud	28192	Gelb	4×
Minifig Neckwear Shoulder Pads with Spikes	12618	Perlgold	1×
Fin Jagged with Axle Hole	76919	Perlgold	2×
FLAT TILE 2X3 W/ ANGLE	35341	Medium Lime	8×
Plate 2 x 2	3022	Gelb	5×
Wedge Sloped 45° 2 x 4 Triple	47759	Perlgold	6×
Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End	47456	Perlgold	8×
Brick Special 2 x 5 with Slope, Studs on Side	79897	Hell leuchtorange	5×
Wedge Sloped 4 x 2 Triple Left	43710	Perlgold	3×
Wedge Sloped 4 x 2 Triple Right	43711	Dunkel sandfarben	3×
Minifig Neckwear Armor Shoulder Pad Single with Scabbard for 2 Katanas, Wedge	5501	Perlgold	1×
Weapon Sword / Katana / Wakizashi Short	5644	Perlgold	5×
Creature Body Part, Dragon Head Upper Jaw, Hollow Eyes, Spikes	3770	Weiß	4×
Wedge Plate 2 x 2 Left	24299	Gelb	2×
Wedge Plate 2 x 2 Right	24307	Gelb	2×
Bracket 1 x 1 - 1 x 1 Inverted	36840	Gelb	12×
Wedge Sloped 4 x 4 Triple with 3 Ridges on Slope	86148	Perlgold	6×
Tile 1 x 2 with Stud Notch Right	5092	Gelb	9×
Tile 1 x 2 with Stud Notch Left	5091	Gelb	9×
Wedge Plate 2 x 4 27° Right	65426	Gelb	1×
Wedge Plate 2 x 4 27° Left	65429	Gelb	1×
Technic Tooth 1 x 3 with Axle Hole [Hollow Underside]	48267	Gelb	2×
Large Figure Limb Cover / Claw / Spike Large with Axle	15362	Perlgold	4×
Plate 2 x 2 Corner	2420	Weiß	4×
Wedge Plate 3 x 3 Cut Corner	2450	Weiß	2×
Brick 2 x 2	3003	Weiß	2×
Brick 1 x 6	3009	Weiß	2×
Plate 2 x 4	3020	Weiß	5×
Plate 2 x 3	3021	Weiß	11×
Plate 2 x 2	3022	Weiß	3×
Plate 4 x 6	3032	Weiß	1×
Slope 45? 2 x 2	3039	Weiß	4×
ROUND BRICK 1X1	3062	Weiß	3×
Technic Plate 2 x 4 [3 Holes]	3709	Weiß	2×
Plate 1 x 4	3710	Weiß	18×
ROOF TILE 1X3/25Â° INV.	4287	Weiß	4×
Plate Round 1 x 1 with Solid Stud	6141	Weiß	4×
ROOF TILE 1X2/45Â°	3040	Weiß	6×
Wedge Curved 6 x 2 Left, Inner Ridges	41748	Weiß	3×
Wedge Plate 3 x 2 Right	43722	Weiß	5×
Wedge Plate 3 x 2 Left	43723	Weiß	5×
BRICK 2X6	44237	Weiß	3×
Slope 45° 2 x 2 Double Convex	3045	Weiß	2×
Plate 4 x 4	3031	Weiß	5×
Slope 30° 1 x 1 x 2/3 (Cheese Slope)	54200	Weiß	4×
Brick Special 1 x 1 with Stud on 1 Side	87087	Weiß	2×
Wedge Curved 4 x 4 No Top Studs	47753	Weiß	3×
Tile Special 2 x 2 Inverted	11203	Weiß	4×
Bracket 1 x 2 - 1 x 2	99781	Weiß	8×
Slope Curved 4 x 1 Double with No Studs	93273	Weiß	6×
Slope Curved 4 x 2 No Studs	93606	Weiß	2×
Slope Curved 4 x 1 Inverted	13547	Weiß	4×
Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom	11215	Weiß	3×
Brick Special 1 x 2 Palisade [aka Log]	30136	Weiß	2×

Bau-DNA

Teile-Einblicke fur Ultra Dragon Battle

Mit 2.177 Teilen liegt dieser Build +378% gegenuber dem durchschnittlichen Ninjago Set und +249% gegenuber der durchschnittlichen Veroffentlichung aus 2026.

LEGONINJAGO

Im Vergleich zum durchschnittlichen Ninjago Set

+378%+1.722 teile

Dieses Set2.177

Durchschnitt455

Durchschnittliches Ninjago Set: 455 Teile uber 408 andere Sets.

Im Vergleich zum durchschnittlichen Set von 2026

+249%+1.553 teile

Dieses Set2.177

Durchschnitt624

Durchschnittliches Set von 2026: 624 Teile uber 427 andere Sets.

Farbprofil

25verschiedene farben

Dominante Farbe

Schwarz

Schwarz736x

34%

Weiß390x

18%

Hellblaugrau229x

11%

Dunkel sandfarben212x

10%

Einzigartige Teile

6.5 Teile pro einzigartigem Typ

329

Wiederholungsfaktor

Durchschnittliche Teile pro einzigartigem Typ.

Meistgenutztes Teil

Bracket 1 x 2 - 2 x 2 Inverted

49x

Ergebnisse basieren auf offiziellen LEGO-Teileinventaren. Die Genauigkeit verbessert sich wenn du Set-Vollständigkeit bestätigst.

Diese Seite ist nicht mit der LEGO Gruppe verbunden oder von ihr genehmigt.

Bau-Einblicke🧩329einzigartige teile🎨25verschiedene farben📊87.1durchschn. teile pro farbe🏆49×Bracket 1 x 2 - 2 x 2 Inverted

🎨 Alle Ninjago Sets 📅 Alle Sets aus 2026

← Zurück zu baubaren Sets