


Schmiede dein ultimatives Erbe als Pokémon-Trainer mit dem großartigen LEGO Pokémon 72153-1 Venusaur, Charizard und Blastoise Ausstellungsset. Dieses epische Diorama-Modell fängt den Höhepunkt deiner Reise ein und präsentiert die drei ikonischen Kanto-Starter in ihren furchterregenden letzten Entwicklungen. Erlebe Venusaur mit seinen beweglichen Ranken und Füßen, Blastoise kampfbereit mit beweglichem Kopf, Armen und mächtigen Wasserkanonen, und Charizard schwebend mit positionierbaren Flügeln, Beinen, Armen und Kopf. Jede legendäre Figur steht majestätisch auf einem einzigartigen Schlachtfeld-Diorama, das kunstvoll Strand-, Dschungel- und Vulkanbiome vereint, um ihre unterschiedlichen Typen darzustellen. Entdecke ein verstecktes Easter Egg, während du diese beeindruckende Hommage an deine Pokémon-Meisterschaft akribisch baust.
Teile-Inventar
| Teil | Farbe | Anz. |
|---|---|---|
![]() Plate 2 x 2 Corner 2420 | Schwarz | 2× |
![]() Tile 1 x 4 with Groove 2431 | Schwarz | 2× |
![]() Brick 1 x 1 3005 | Schwarz | 2× |
![]() Brick 1 x 4 3010 | Schwarz | 1× |
![]() Plate 2 x 4 3020 | Schwarz | 13× |
![]() Plate 2 x 3 3021 | Schwarz | 1× |
![]() Plate 2 x 2 3022 | Schwarz | 8× |
![]() Plate 1 x 2 3023 | Schwarz | 10× |
![]() Plate 1 x 1 3024 | Schwarz | 16× |
![]() Plate 4 x 12 3029 | Schwarz | 1× |
10 von 1084 Teilen angezeigt
🔓 Melde dich an um alle Teile zu sehen| Plate 2 x 3 | 3021 | Schwarz | 1× |
| Plate 2 x 2 | 3022 | Schwarz | 8× |
| Plate 1 x 2 | 3023 | Schwarz | 10× |
| Plate 1 x 1 | 3024 | Schwarz | 16× |
| Plate 4 x 12 | 3029 | Schwarz | 1× |
| Plate 4 x 10 | 3030 | Schwarz | 4× |
| Plate 4 x 6 | 3032 | Schwarz | 1× |
| Plate 6 x 10 | 3033 | Schwarz | 1× |
| Plate 4 x 8 | 3035 | Schwarz | 2× |
| Plate 6 x 8 | 3036 | Schwarz | 2× |
| FLAT TILE 2X2 | 3068 | Schwarz | 2× |
| FLAT TILE 1X2 | 3069 | Schwarz | 4× |
| Plate 1 x 8 | 3460 | Schwarz | 1× |
| Plate 1 x 3 | 3623 | Schwarz | 2× |
| Brick Arch 1 x 4 | 3659 | Schwarz | 1× |
| Slope Inverted 45° 2 x 1 | 3665 | Schwarz | 2× |
| Plate 1 x 6 | 3666 | Schwarz | 6× |
| Plate 1 x 4 | 3710 | Schwarz | 24× |
| Plate 2 x 6 | 3795 | Schwarz | 16× |
| Plate 2 x 10 | 3832 | Schwarz | 2× |
| Hinge Brick 1 x 2 Base | 3937 | Schwarz | 6× |
| Tile 1 x 8 with Groove | 4162 | Schwarz | 2× |
| Plate 1 x 10 | 4477 | Schwarz | 2× |
| Brick Special 1 x 1 Studs on 4 Sides | 4733 | Schwarz | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Schwarz | 6× |
| Tile 1 x 6 with Groove | 6636 | Schwarz | 1× |
| Technic Brick 1 x 14 [13 Pin Holes] | 32018 | Schwarz | 8× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Schwarz | 10× |
| Slope 45° 2 x 2 Double | 3043 | Schwarz | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Schwarz | 1× |
| BRICK 2X6 | 44237 | Schwarz | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Schwarz | 3× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Schwarz | 4× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Schwarz | 9× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Schwarz | 6× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Schwarz | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Schwarz | 9× |
| Tile 2 x 4 with Groove | 87079 | Schwarz | 4× |
| Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | 87552 | Schwarz | 2× |
| BRICK 2X10 | 92538 | Schwarz | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Schwarz | 2× |
| Plate 2 x 14 | 91988 | Schwarz | 4× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Schwarz | 4× |
| Slope Curved 4 x 1 Inverted | 13547 | Schwarz | 6× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Schwarz | 8× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Schwarz | 2× |
| PLATE 3X4 WITH 4 KNOBS | 17836 | Schwarz | 1× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Schwarz | 2× |
| ANGLE PLATE 1X2 / 2X4 | 21731 | Schwarz | 3× |
| Tile 2 x 2 Corner | 14719 | Schwarz | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Schwarz | 2× |
| Plate 3 x 3 | 11212 | Schwarz | 2× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Schwarz | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Schwarz | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Schwarz | 1× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Schwarz | 1× |
| PLATE 1x2 W. HORIZONTAL HOLE Ø4,85 REV. | 28809 | Schwarz | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Schwarz | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Schwarz | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Schwarz | 9× |
| Technic Brick 4 x 4 with 2 x 2 Opening | 32324 | Schwarz | 1× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Schwarz | 2× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Schwarz | 8× |
| Slope Inverted 45° 4 x 1 Double with 1 x 2 Recessed | 32802 | Schwarz | 4× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Schwarz | 6× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Schwarz | 28× |
| Wedge Plate 2 x 4 27° Right | 65426 | Schwarz | 1× |
| Wedge Plate 2 x 4 27° Left | 65429 | Schwarz | 2× |
| Slope Curved 8 x 2 No Studs | 42918 | Schwarz | 10× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Schwarz | 2× |
| BRICK 2X2 Ø4.85 VERTIC. SNAP | 48454 | Schwarz | 2× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Schwarz | 3× |
| Tile 2 x 6 | 69729 | Schwarz | 1× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Schwarz | 1× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Schwarz | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Schwarz | 6× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Schwarz | 6× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Schwarz | 6× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Schwarz | 3× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Schwarz | 10× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Schwarz | 8× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Schwarz | 9× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Schwarz | 2× |
| Plate 3 x 3 Corner | 77844 | Schwarz | 4× |
| BRICK 4X6, W/ 4.85 HOLE, CUT OUT | 1679 | Schwarz | 3× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Schwarz | 1× |
| Brick Curved 1 x 2 x 2/3 Double Curved Top, No Studs | 3563 | Schwarz | 1× |
| Plate 4 x 4 Corner | 2639 | Schwarz | 2× |
| Bracket 5 x 1 x 1 1/3 | 5712 | Schwarz | 2× |
| Tile Round 1 x 2 | 1126 | Schwarz | 2× |
| Plate Round 1 x 2 Half Circle with Stud (Jumper) | 1745 | Schwarz | 8× |
| Tile Round 1 x 2 Half Circle | 1748 | Schwarz | 2× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Schwarz | 2× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Schwarz | 2× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Schwarz | 6× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Schwarz | 1× |
| Bracket 5 x 2 x 1 1/3 with Bottom Stud Holder | 79180 | Schwarz | 1× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Schwarz | 2× |
| Slope Curved 3 x 1 x 2/3 | 7302 | Schwarz | 8× |
| Technic Axle 4 | 3705 | Schwarz | 3× |
| Technic Axle 6 | 3706 | Schwarz | 2× |
| Technic Ball Joint with Through Axle Hole | 53585 | Schwarz | 2× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Schwarz | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Schwarz | 2× |
| Technic Pin Connector Hub with 2 Perpendicular Axles | 10197 | Schwarz | 2× |
| Technic Connector Beam 3 x 3 | 39793 | Schwarz | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Schwarz | 101× |
| Technic Beam 1 x 15 Thick with Alternating Holes | 71710 | Schwarz | 4× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Schwarz | 6× |
| Technic Pin Connector Perpendicular 2 x 2 Bent | 44809 | Schwarz | 2× |
| BUSH FOR CROSS AXLE | 42798 | Schwarz | 1× |
| Technic Beam 1 x 2 with Ball Joint Holes in Ball | 67697 | Schwarz | 2× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Schwarz | 1× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Schwarz | 4× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 44874 | Schwarz | 3× |
| Technic Beam 2 x 3 Thick [90° Offset Centre Beam Hole] | 3167 | Schwarz | 2× |
| Brick 1 x 2 | 3004 | Sandfarben | 10× |
| Brick 1 x 1 | 3005 | Sandfarben | 2× |
| Plate 1 x 2 | 3023 | Sandfarben | 12× |
| Plate 2 x 6 | 3795 | Sandfarben | 1× |
| FLAT TILE 1X2 | 3069 | Sandfarben | 6× |
| Plate 2 x 2 Corner | 2420 | Sandfarben | 10× |
| Plate 2 x 2 | 3022 | Sandfarben | 6× |
| Plate 2 x 4 | 3020 | Sandfarben | 3× |
| Brick 2 x 4 | 3001 | Sandfarben | 4× |
| Plate 1 x 8 | 3460 | Sandfarben | 4× |
| Plate 2 x 3 | 3021 | Sandfarben | 9× |
| Brick Special 1 x 1 with Headlight | 4070 | Sandfarben | 4× |
| Plate 1 x 3 | 3623 | Sandfarben | 10× |
| Plate 1 x 6 | 3666 | Sandfarben | 7× |
| Plate 1 x 10 | 4477 | Sandfarben | 1× |
| Brick 2 x 3 | 3002 | Sandfarben | 2× |
| Brick 1 x 3 | 3622 | Sandfarben | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Sandfarben | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Sandfarben | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Sandfarben | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Sandfarben | 2× |
| Plate 4 x 4 | 3031 | Sandfarben | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Sandfarben | 1× |
| Brick Arch 1 x 4 | 3659 | Sandfarben | 3× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Sandfarben | 2× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Sandfarben | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Sandfarben | 4× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Sandfarben | 3× |
| Slope 18° 4 x 1 | 60477 | Sandfarben | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Sandfarben | 1× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Sandfarben | 2× |
| Plate Round Half 3 x 6 with 1 x 2 Cutout | 18646 | Sandfarben | 2× |
| Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version] | 15254 | Sandfarben | 4× |
| Plate 3 x 3 | 11212 | Sandfarben | 2× |
| Tile 2 x 4 with Groove | 87079 | Sandfarben | 3× |
| Tile Round 1 x 1 Quarter | 25269 | Sandfarben | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Sandfarben | 20× |
| Tile 2 x 3 | 26603 | Sandfarben | 1× |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 26604 | Sandfarben | 8× |
| Slope 45° 2 x 4 | 3037 | Sandfarben | 2× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Sandfarben | 8× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Sandfarben | 1× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Sandfarben | 2× |
| Slope Double 45° 1 x 1 | 35464 | Sandfarben | 8× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Sandfarben | 5× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Sandfarben | 1× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Sandfarben | 5× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Sandfarben | 1× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Sandfarben | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Sandfarben | 1× |
| Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 87544 | Sandfarben | 2× |
| Bar 1L / Stem with 3 Sprouts/Prongs | 68211 | Sandfarben | 6× |
| Tile 2 x 6 | 69729 | Sandfarben | 1× |
| Plate 1 x 5 | 78329 | Sandfarben | 7× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Sandfarben | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Sandfarben | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Sandfarben | 4× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Sandfarben | 3× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Sandfarben | 3× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Sandfarben | 22× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Sandfarben | 6× |
| Brick Round Corner 3 x 3 x 2 Dome Top | 88293 | Sandfarben | 6× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Sandfarben | 20× |
| Plate Special 1 x 2 with Handles on Ends | 18649 | Sandfarben | 16× |
| Wedge Plate 2 x 2 Left | 24299 | Sandfarben | 5× |
| Wedge Plate 2 x 2 Right | 24307 | Sandfarben | 5× |
| Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts | 1750 | Sandfarben | 2× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Sandfarben | 3× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Sandfarben | 2× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Sandfarben | 1× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Sandfarben | 2× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Sandfarben | 2× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Sandfarben | 2× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Sandfarben | 2× |
| Brick Curved 1 x 2 x 1 2/3 with 1 Cutout | 5907 | Sandfarben | 2× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Sandfarben | 2× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Sandfarben | 1× |
| CONNECTOR PEG/CROSS AXLE | 6562 | Sandfarben | 4× |
| Plate 2 x 2 Corner | 2420 | Dunkellila | 7× |
| Brick 2 x 3 | 3002 | Dunkelblau | 1× |
| Plate 1 x 8 | 3460 | Dunkelblau | 1× |
| Brick 1 x 3 | 3622 | Dunkelblau | 5× |
| Plate 1 x 4 | 3710 | Dark Blue-Violet | 4× |
| Plate 2 x 6 | 3795 | Dunkelblau | 2× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Dunkelblaugrau | 2× |
| Hinge Brick 1 x 2 Base | 3937 | Dunkelblaugrau | 1× |
| Brick 2 x 2 Corner | 2357 | Dunkellila | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Dunkellila | 17× |
| Tile 1 x 3 | 63864 | Dunkelblau | 2× |
| Wedge 2 x 2 Facet | 87620 | Sandblau | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Dunkelblau | 4× |
| Wedge Plate 2 x 2 Right | 24307 | Dunkelblau | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Dunkelblau | 12× |
| BRICK 1X2 W. HORIZONTAL HOLDER | 42925 | Dark Blue-Violet | 2× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Dunkelblaugrau | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Dunkelblau | 21× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Dunkelblau | 21× |
| Plate 2 x 16 | 4282 | Dunkelblau | 2× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Dark Blue-Violet | 4× |
| LIGHT SWORD - BLADE | 21462 | Dark Blue-Violet | 2× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Dunkelblaugrau | 2× |
| Slope Curved 2 x 2 with Stud Notch Right | 5093 | Dunkel Azur | 5× |
| Brick Curved 2 x 1 with Inverted Cutout | 78666 | Dunkelblau | 26× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Dunkelblau | 2× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Dunkel Azur | 4× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Schwarz | 14× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Schwarz | 18× |
| TECHNIC LEVER 3M | 65123 | Dark Blue-Violet | 2× |
| Brick 1 x 2 | 3004 | Schwarz | 2× |
| Plate 2 x 8 | 3034 | Schwarz | 2× |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 68568 | Schwarz | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Schwarz | 10× |
| Plate 4 x 4 | 3031 | Schwarz | 2× |
| Plate Round Corner 4 x 4 | 30565 | Schwarz | 8× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Schwarz | 4× |
| PLATE 2X2 ROUND | 4032 | Leuchtgrün | 2× |
| Plant, Plate 1 x 1 Round with 3 Leaves | 32607 | Schwarz | 2× |
| NOSE CONE 2X2X2 | 14918 | Leuchtgrün | 2× |
| Plant, Flower, Plate Round 1 x 1 with 5 Petals | 24866 | Schwarz | 34× |
| FLAT TILE 2X2 | 3068 | Leuchtgrün | 12× |
| Tile 1 x 3 | 63864 | Schwarz | 16× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Schwarz | 8× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Schwarz | 12× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Schwarz | 12× |
| Tile Round 1 x 2 Half Circle | 1748 | Schwarz | 8× |
| Technic Pin 1/2 with Anti-Stud | 65826 | Leuchtgrün | 1× |
| Plate 1 x 4 | 3710 | Orange | 23× |
| Slope 45? 2 x 2 | 3039 | Orange | 2× |
| Brick 1 x 2 | 3004 | Orange | 5× |
| Plate 2 x 6 | 3795 | Orange | 1× |
| ROOF TILE 1X2/45° | 3040 | Orange | 2× |
| Plate 2 x 3 | 3021 | Orange | 10× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Orange | 20× |
| Plate 2 x 4 | 3020 | Orange | 6× |
| Plate 2 x 2 | 3022 | Orange | 4× |
| Tile 1 x 4 with Groove | 2431 | Orange | 7× |
| Brick 1 x 1 | 3005 | Orange | 4× |
| Plate 1 x 2 | 3023 | Orange | 53× |
| Wedge Plate 3 x 2 Right | 43722 | Orange | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Orange | 2× |
| FLAT TILE 1X2 | 3069 | Orange | 13× |
| Slope Curved 3 x 1 No Studs | 50950 | Orange | 4× |
| Cone 1 x 1 [Top Groove] | 59900 | Orange | 4× |
| Brick Special 1 x 1 with Headlight | 4070 | Orange | 4× |
| Plate 1 x 1 | 3024 | Orange | 24× |
| FLAT TILE 2X2 | 3068 | Orange | 5× |
| Tile 1 x 3 | 63864 | Orange | 2× |
| Tile 2 x 4 with Groove | 87079 | Orange | 1× |
| Tile 1 x 6 with Groove | 6636 | Orange | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Orange | 1× |
| Plate Special 1 x 2 with Door Rail | 32028 | Orange | 1× |
| Slope Curved 4 x 2 No Studs | 93606 | Orange | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Orange | 12× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Orange | 4× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Orange | 17× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Orange | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Orange | 3× |
| Plate 2 x 2 Corner | 2420 | Orange | 4× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Orange | 4× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Orange | 1× |
| Plate 1 x 3 | 3623 | Orange | 4× |
| Tile Round 2 x 2 with Hole | 15535 | Orange | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Orange | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Orange | 1× |
| Wedge Plate 2 x 2 Left | 24299 | Orange | 1× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Orange | 4× |
| Plate Round Corner 3 x 3 | 30357 | Orange | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Orange | 1× |
| ELEMENT SEPARATOR | 31510 | Orange | 3× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Orange | 2× |
| Tile 2 x 3 | 26603 | Orange | 6× |
| FLAT TILE 1X1, 1/2 CIRCLE | 35399 | Orange | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Orange | 8× |
| PLATE 1X1 W/HOLDER VERTICAL | 52738 | Orange | 4× |
| PLATE 1X1 W. HOLDER | 44860 | Orange | 4× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Orange | 6× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Orange | 8× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Orange | 8× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Orange | 12× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Orange | 6× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Orange | 6× |
| 3.2 SHAFT W/ 5.9 BALL | 67692 | Orange | 12× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Orange | 1× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Orange | 1× |
| Plate 3 x 3 | 11212 | Orange | 4× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Orange | 4× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Orange | 4× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Orange | 2× |
| Plant, Flower, Peony Rose with 2 Layers | 5904 | Orange | 6× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Orange | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Orange | 8× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Orange | 8× |
| Rubber Technic Tread Attachment | 24375 | Orange | 8× |
| CROSS BLOCK 90° | 40146 | Orange | 2× |
| ANGLE ELEMENT, 0 DEGREES [1] | 42127 | Orange | 2× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Orange | 12× |
| ANGLE ELEMENT, 157,5 DEGR. [3] | 42128 | Orange | 6× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Orange | 4× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Orange | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Schwarz | 12× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Schwarz | 24× |
| PLATE 2X2 ROUND | 4032 | Schwarz | 1× |
| Brick Curved 6 x 1 | 42022 | Schwarz | 12× |
| Brick 2 x 4 | 3001 | Rot | 10× |
| Brick 2 x 2 | 3003 | Rot | 3× |
| Brick 1 x 2 | 3004 | Rot | 1× |
| Brick 1 x 1 | 3005 | Rot | 2× |
| Plate 2 x 4 | 3020 | Rot | 3× |
| Plate 2 x 3 | 3021 | Rot | 10× |
| Plate 2 x 2 | 3022 | Rot | 2× |
| Plate 1 x 2 | 3023 | Rot | 2× |
| Plate 1 x 1 | 3024 | Rot | 3× |
| Brick 1 x 3 | 3622 | Rot | 4× |
| Plate 1 x 3 | 3623 | Rot | 4× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Rot | 1× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Rot | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rot | 2× |
| BRICK Ø16 W. CROSS | 6143 | Rot | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Rot | 3× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Rot | 1× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Rot | 1× |
| STICK 6M W/FLANGE | 28921 | Rot | 3× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Rot | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Rot | 4× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Rot | 1× |
| HOLDER Ø3.2 W/TUBE Ø3.2 HOLE | 44873 | Rot | 1× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Rot | 2× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Rot | 4× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Rot | 4× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Rot | 4× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Rot | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Rot | 8× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Rot | 4× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Rot | 1× |
| Plate 3 x 3 Corner | 77844 | Rot | 4× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Rot | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Rot | 6× |
| Tile Round 2 x 2 Half Circle | 5520 | Rot | 1× |
| Technic Beam 1 x 5 Thick | 32316 | Rot | 2× |
| Technic Axle 2 Notched | 32062 | Rot | 46× |
| Technic Beam 1 x 3 Thick | 32523 | Rot | 9× |
| Technic Axle 4 | 3705 | Rot | 5× |
| Technic Axle 6 | 3706 | Rot | 2× |
| Technic Axle 12 | 3708 | Rot | 1× |
| ANGLE ELEMENT 135 DEG. [4] | 42156 | Rot | 4× |
| BUSH FOR CROSS AXLE | 42798 | Rot | 2× |
| Technic Pin 1/2 with Friction | 89678 | Rot | 9× |
| Slope 45? 2 x 2 | 3039 | Schwarz | 2× |
| Plant, Leaves, Round 2 x 2 x 2/3 with + Axle Hole and 4 Leaf Extensions | 15469 | Dunkelgrün | 6× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Schwarz | 20× |
| Brick Special 1 x 1 with Headlight | 4070 | Schwarz | 2× |
| Technic Beam 1 x 5 Thick | 32316 | Schwarz | 2× |
| Brick 2 x 2 Corner | 2357 | Gelb | 4× |
| Radiator Grille 1x2 | 2412 | Gelb | 10× |
| Brick 1 x 2 | 3004 | Gelb | 8× |
| Brick 1 x 6 | 3009 | Gelb | 2× |
| Brick 1 x 4 | 3010 | Gelb | 2× |
| Plate 2 x 3 | 3021 | Gelb | 15× |
| Plate 1 x 2 | 3023 | Gelb | 19× |
| Plate 2 x 8 | 3034 | Gelb | 3× |
| ROUND BRICK 1X1 | 3062 | Gelb | 2× |
| FLAT TILE 2X2 | 3068 | Gelb | 3× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Gelb | 2× |
| Plate 1 x 4 | 3710 | Gelb | 2× |
| PLATE 2X2 ROUND | 4032 | Gelb | 8× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gelb | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Gelb | 6× |
| Tile 2 x 3 | 26603 | Gelb | 2× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Gelb | 5× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Gelb | 22× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Gelb | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Gelb | 1× |
| FLAT TILE 1X1, ROUND | 35381 | Gelb | 2× |
| FLAT TILE 1X1, 1/2 CIRCLE | 35399 | Gelb | 6× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Gelb | 4× |
| BRICK 1X1 W/HOLDER, H0RIZONTAL | 65460 | Gelb | 4× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Gelb | 4× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Gelb | 1× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Gelb | 20× |
| Slope Double 45° 1 x 1 | 35464 | Gelb | 8× |
| Plate 1 x 5 | 78329 | Gelb | 4× |
| Plate 3 x 3 Corner | 77844 | Gelb | 2× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Gelb | 4× |
| Plate Special 1 x 2 with Handles on Ends | 18649 | Gelb | 2× |
| Technic Beam 1 x 7 Thick | 32524 | Gelb | 4× |
| Technic Axle 3 | 4519 | Gelb | 12× |
| Technic Axle 7 | 44294 | Gelb | 2× |
| 1/2 BUSH | 42136 | Gelb | 2× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Gelb | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-grün | 4× |
| Plate 1 x 4 | 3710 | Trans-grün | 1× |
| ROUND BRICK 1X1 | 3062 | Trans-grün | 8× |
| Plate 1 x 6 | 3666 | Sandgrün | 1× |
| Plate 2 x 6 | 3795 | Sandgrün | 4× |
| Plate 2 x 2 Corner | 2420 | Sandgrün | 12× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Hellblaugrau | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Trans-grün | 6× |
| Tile 2 x 4 with Groove | 87079 | Sandgrün | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Sandgrün | 18× |
| FLAT TILE 1X1, ROUND | 35381 | Trans-grün | 2× |
| BRICK 2X6 | 44237 | Trans-grün | 4× |
| Brick Curved 1 x 3 x 2 | 33243 | Schwarz | 2× |
| Tile Round 2 x 4 | 66857 | Schwarz | 2× |
| Tile Round 2 x 2 Half Circle | 5520 | Schwarz | 2× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Schwarz | 2× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Schwarz | 2× |
| Brick 2 x 4 | 3001 | Schwarz | 1× |
| ROOF TILE 1X2/45° | 3040 | Schwarz | 4× |
| Plate Round Half 3 x 6 with 1 x 2 Cutout | 18646 | Schwarz | 4× |
| Wedge Plate 2 x 2 Left | 24299 | Schwarz | 3× |
| Wedge Plate 2 x 2 Right | 24307 | Schwarz | 3× |
| FLAT TILE 1X1 | 3070 | Schwarz | 6× |
| Tile Round 1 x 1 Quarter | 25269 | Schwarz | 2× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Schwarz | 8× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Schwarz | 17× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Schwarz | 2× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Schwarz | 4× |
| Tile 3 x 3 Curved, Macaroni | 79393 | Schwarz | 8× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Schwarz | 20× |
| Tile Round 3 x 3 | 67095 | Schwarz | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Schwarz | 2× |
| Plate 1 x 8 | 3460 | Sandfarben | 1× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Sandfarben | 2× |
| Brick 1 x 2 | 3004 | Yellowish Green | 4× |
| Plate 2 x 4 | 3020 | Yellowish Green | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-Bright Green | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Sandfarben | 2× |
| Plate 2 x 2 | 3022 | Sandfarben | 5× |
| Plate 2 x 4 | 3020 | Hellblaugrau | 4× |
| Plate 2 x 8 | 3034 | Hellblaugrau | 4× |
| Plate 1 x 4 | 3710 | Hellblaugrau | 2× |
| Plate 2 x 6 | 3795 | Hellblaugrau | 1× |
| PLATE 2X2 ROUND | 4032 | Metallic Silber | 1× |
| Brick 1 x 3 | 3622 | Hellblaugrau | 2× |
| BRICK Ø16 W. CROSS | 6143 | Metallic Silber | 3× |
| ROOF TILE 1X3/25° INV. | 4287 | Metallic Silber | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Hellblaugrau | 6× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Hellblaugrau | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Hellblaugrau | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Hellblaugrau | 8× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Hellblaugrau | 8× |
| Slope Curved 2 x 1 Inverted | 24201 | Hellblaugrau | 8× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Hellblaugrau | 8× |
| Brick Round 2 x 2 Dome Bottom [Open Stud] | 15395 | Hellblaugrau | 2× |
| Brick Arch 1 x 6 Raised Arch | 92950 | Hellblaugrau | 4× |
| Technic Beam 1 x 3 Thick | 32523 | Metallic Silber | 2× |
| Plate 2 x 4 | 3020 | Very Light Orange | 7× |
| Brick 1 x 2 | 3004 | Very Light Orange | 4× |
| FLAT TILE 1X2 | 3069 | Very Light Orange | 5× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Sandfarben | 8× |
| Tile 2 x 4 with Groove | 87079 | Sandfarben | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Sandfarben | 4× |
| FLAT TILE 2X2 | 3068 | Very Light Orange | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Sandfarben | 7× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Sandfarben | 4× |
| Brick 1 x 1 | 3005 | Very Light Orange | 2× |
| Brick 1 x 3 | 3622 | Very Light Orange | 4× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Sandfarben | 2× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Sandfarben | 13× |
| Tile 1 x 3 | 63864 | Sandfarben | 2× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Sandfarben | 2× |
| Plate 2 x 10 | 3832 | Sandfarben | 1× |
| Plate Round Corner 3 x 3 | 30357 | Sandfarben | 10× |
| Plate 2 x 3 | 3021 | Very Light Orange | 4× |
| Tile 3 x 3 Curved, Macaroni | 79393 | Sandfarben | 4× |
| Brick 2 x 3 | 3002 | Very Light Orange | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Dunkelblaugrau | 4× |
| Plate 2 x 2 Corner | 2420 | Dunkelblaugrau | 4× |
| Plate 2 x 10 | 3832 | Dunkelblaugrau | 4× |
| Plate 1 x 1 | 3024 | Dunkelblaugrau | 3× |
| Plate 6 x 8 | 3036 | Dunkelblaugrau | 2× |
| Plate 2 x 16 | 4282 | Dunkelblaugrau | 2× |
| Brick 1 x 12 | 6112 | Dunkelblaugrau | 4× |
| Plate 8 x 8 | 41539 | Dunkelblaugrau | 1× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Dunkelblaugrau | 7× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Dunkelblaugrau | 7× |
| Wedge Plate 3 x 2 Right | 43722 | Dunkelblaugrau | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Dunkelblaugrau | 1× |
| BRICK 2X6 | 44237 | Dunkelblaugrau | 6× |
| BRICK 1X2X2 | 3245 | Dunkelblaugrau | 1× |
| Plate 2 x 8 | 3034 | Dunkelblaugrau | 1× |
| Plate 1 x 8 | 3460 | Dunkelblaugrau | 3× |
| Brick Arch 1 x 4 | 3659 | Dunkelblaugrau | 1× |
| Plate 1 x 4 | 3710 | Dunkelblaugrau | 24× |
Bau-DNA
Teile-Einblicke fur Venusaur, Charizard and Blastoise
Mit 6.838 Teilen liegt dieser Build +759% gegenuber dem durchschnittlichen Pokémon Set und +1014% gegenuber der durchschnittlichen Veroffentlichung aus 2026.
Im Vergleich zum durchschnittlichen Pokémon Set
Durchschnittliches Pokémon Set: 796 Teile uber 4 andere Sets.
Im Vergleich zum durchschnittlichen Set von 2026
Durchschnittliches Set von 2026: 614 Teile uber 428 andere Sets.
Farbprofil
Dominante Farbe
Schwarz
Einzigartige Teile
14.8 Teile pro einzigartigem Typ
Wiederholungsfaktor
Durchschnittliche Teile pro einzigartigem Typ.
Meistgenutztes Teil
Plate 1 x 2
216xErgebnisse basieren auf offiziellen LEGO-Teileinventaren. Die Genauigkeit verbessert sich wenn du Set-Vollständigkeit bestätigst.
Diese Seite ist nicht mit der LEGO Gruppe verbunden oder von ihr genehmigt.









