


Embarquez pour un voyage supersonique avec la LEGO® Icons Concorde (10318) et construisez une réplique détaillée de l'avion de passagers commercial supersonique le plus célèbre du monde. Profitez d'une expérience de construction en pleine conscience en assemblant ce modèle impressionnant. Découvrez des détails super-authentiques, fidèles au véritable jet anglo-français : un nez incliable, un train d'atterrissage fonctionnel, une roue de pare-chocs arrière rétractable, des ailes delta avec élevons mobiles et des gouvernes supérieures et inférieures articulées. Explorez le coin salon accessible et présentez votre modèle sur son support en modes vol, décollage ou atterrissage. Trouvez la relaxation et entrez dans la zone avec cet ensemble de construction de collection.
Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Tile 6 x 6 with Bottom Tubes 10202 | Blanc | 2× |
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Jaune | 1× |
![]() Windscreen Cylinder 4 x 4 x 2 with Trans-Black Windows pattern 103918pat0001 | Blanc | 1× |
![]() Technic Gear 8 Tooth [Reinforced] 10928 | Gris bleuté foncé | 1× |
![]() Bar Holder with Clip 11090 | Blanc | 1× |
![]() Tile Special 2 x 2 Inverted 11203 | Blanc | 1× |
![]() Tile Special 2 x 2 Inverted 11203 | Noir | 2× |
![]() Tile Special 2 x 2 Inverted 11203 | Gris bleuté clair | 2× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Bleu foncé | 3× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Jaune | 2× |
Affichage de 10 sur 411 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Tile Special 2 x 2 Inverted | 11203 | Blanc | 1× |
| Tile Special 2 x 2 Inverted | 11203 | Noir | 2× |
| Tile Special 2 x 2 Inverted | 11203 | Gris bleuté clair | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Bleu foncé | 3× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Jaune | 2× |
| Plate 3 x 3 | 11212 | Blanc | 5× |
| Plate 3 x 3 | 11212 | Gris bleuté foncé | 5× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Noir | 1× |
| Technic Pin Connector Perpendicular 2 x 4 Bent - Beam with 90 Hole Ø 4.8 | 11455 | Noir | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Jaune | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Blanc | 6× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Gris bleuté clair | 3× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Blanc | 13× |
| Technic Beam 1 x 5 Thin with Axle Holes on Ends | 11478 | Blanc | 4× |
| Slope Curved 4 x 1 Inverted | 13547 | Blanc | 2× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Gris bleuté clair | 2× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Blanc | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Gris bleuté foncé | 1× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Gris bleuté clair | 1× |
| Panel 1 x 4 x 2 with Side Supports - Hollow Studs | 14718 | Blanc | 4× |
| Tile 2 x 2 Corner | 14719 | Blanc | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Noir | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Blanc | 66× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Blanc | 2× |
| Technic Axle 5 with Stop | 15462 | Marron rougeâtre | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Blanc | 8× |
| Tile Round 1 x 2 Half Circle | 1748 | Blanc | 1× |
| Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts | 1750 | Noir | 2× |
| Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 18575 | Beige | 2× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Jaune | 4× |
| Brick Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports | 18838 | Gris bleuté clair | 2× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Rouge | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Beige | 4× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Jaune | 1× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Blanc | 4× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Blanc | 2× |
| Brick 2 x 2 Corner | 2357 | Marron rougeâtre | 2× |
| Brick 2 x 2 Corner | 2357 | Blanc | 14× |
| Technic Axle 11 | 23948 | Jaune | 1× |
| Slope 45° 2 x 6 | 23949 | Gris bleuté foncé | 1× |
| Panel 1 x 3 x 1 | 23950 | Blanc | 2× |
| Plate 2 x 2 Corner | 2420 | Noir | 6× |
| Plate 2 x 2 Corner | 2420 | Blanc | 16× |
| Plate 2 x 2 Corner | 2420 | Rouge | 4× |
| Tile Round 1 x 1 Half Circle | 24246 | Bleu foncé | 3× |
| Tile Round 1 x 1 Half Circle | 24246 | Blanc | 4× |
| Wedge Plate 2 x 2 Left | 24299 | Gris bleuté foncé | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Gris bleuté foncé | 1× |
| Slope Curved 3 x 2 No Studs | 24309 | Gris bleuté clair | 4× |
| Tile 1 x 4 with Groove | 2431 | Noir | 1× |
| Tile 1 x 4 with Groove | 2431 | Bleu foncé | 2× |
| Technic Axle 3 with Stop | 24316 | Marron rougeâtre | 3× |
| Plate 2 x 12 | 2445 | Rouge | 1× |
| Plate 2 x 12 | 2445 | Gris bleuté clair | 1× |
| Brick 1 x 16 | 2465 | Blanc | 12× |
| Brick 1 x 16 | 2465 | Noir | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Blanc | 10× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Blanc | 13× |
| Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 26599 | Noir | 6× |
| Tile 2 x 3 | 26603 | Gris bleuté clair | 2× |
| Tile 2 x 3 | 26603 | Blanc | 4× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Blanc | 2× |
| Technic Worm Gear Short | 27938 | Gris bleuté foncé | 1× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Noir | 1× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Noir | 2× |
| Plate Special 2 x 2 with 2 Pin Holes | 2817 | Noir | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Blanc | 5× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Noir | 2× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Blanc | 6× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Blanc | 5× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Blanc | 5× |
| Slope 55° 1 x 6 x 5 with Bottom Stud Holders | 2937 | Blanc | 4× |
| Brick 2 x 4 | 3001 | Blanc | 5× |
| Brick 2 x 4 | 3001 | Noir | 3× |
| Brick 2 x 3 | 3002 | Gris bleuté foncé | 1× |
| Brick 2 x 3 | 3002 | Gris bleuté clair | 1× |
| Brick 2 x 3 | 3002 | Marron rougeâtre | 4× |
| Brick 2 x 2 | 3003 | Noir | 1× |
| Brick 1 x 2 | 3004 | Rouge | 2× |
| Brick 1 x 2 | 3004 | Blanc | 21× |
| Brick 1 x 2 | 3004 | Marron rougeâtre | 4× |
| Brick 1 x 2 | 3004 | Gris bleuté foncé | 10× |
| Brick 1 x 2 | 3004 | Orange | 4× |
| Brick 1 x 2 | 3004 | Bleu foncé | 1× |
| Brick 1 x 1 | 3005 | Blanc | 21× |
| Brick 1 x 1 | 3005 | Gris bleuté clair | 4× |
| Brick 2 x 8 | 3007 | Marron rougeâtre | 1× |
| Brick 1 x 8 | 3008 | Bleu foncé | 1× |
| Brick 1 x 8 | 3008 | Blanc | 13× |
| Brick 1 x 8 | 3008 | Beige | 2× |
| Brick 1 x 8 | 3008 | Marron rougeâtre | 1× |
| Brick 1 x 8 with White 'Concorde' print | 3008pr0075 | Bleu foncé | 1× |
| Brick 1 x 6 | 3009 | Orange | 2× |
| Brick 1 x 6 | 3009 | Noir | 8× |
| Brick 1 x 6 | 3009 | Blanc | 19× |
| Brick 1 x 6 | 3009 | Gris bleuté foncé | 1× |
| Brick 1 x 6 | 3009 | Bleu foncé | 1× |
| Brick 1 x 4 | 3010 | Bleu foncé | 1× |
| Brick 1 x 4 | 3010 | Blanc | 10× |
| Plate 2 x 4 | 3020 | Noir | 9× |
| Plate 2 x 4 | 3020 | Blanc | 7× |
| Plate 2 x 4 | 3020 | Gris bleuté clair | 9× |
| Plate 2 x 4 | 3020 | Marron rougeâtre | 4× |
| Plate 2 x 3 | 3021 | Rouge | 5× |
| Plate 2 x 3 | 3021 | Blanc | 8× |
| Plate 2 x 3 | 3021 | Noir | 5× |
| Plate 2 x 3 | 3021 | Jaune | 1× |
| Plate 2 x 2 | 3022 | Gris bleuté clair | 11× |
| Plate 2 x 2 | 3022 | Blanc | 7× |
| Plate 2 x 2 | 3022 | Rouge | 9× |
| Plate 1 x 2 | 3023 | Blanc | 58× |
| Plate 1 x 2 | 3023 | Rouge | 7× |
| Plate 1 x 2 | 3023 | Noir | 37× |
| Plate 1 x 2 | 3023 | Bleu foncé | 2× |
| Plate 1 x 2 | 3023 | Gris bleuté clair | 3× |
| Plate 1 x 2 | 3023 | Noir | 25× |
| Plate 1 x 1 | 3024 | Blanc | 28× |
| Plate 1 x 1 | 3024 | Bleu foncé | 2× |
| Plate 1 x 1 | 3024 | Trans-jaune | 2× |
| Plate 4 x 4 | 3031 | Gris bleuté clair | 2× |
| Plate 4 x 4 | 3031 | Blanc | 2× |
| Plate 4 x 6 | 3032 | Gris bleuté foncé | 1× |
| Plate 4 x 6 | 3032 | Blanc | 1× |
| Plate 2 x 8 | 3034 | Gris bleuté clair | 1× |
| Plate 2 x 8 | 3034 | Blanc | 2× |
| Plate 2 x 8 | 3034 | Rouge | 2× |
| Plate 4 x 8 | 3035 | Blanc | 1× |
| Plate 4 x 8 | 3035 | Marron rougeâtre | 1× |
| Plate 6 x 8 | 3036 | Blanc | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Marron rougeâtre | 3× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Blanc | 4× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Gris bleuté clair | 4× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Noir | 9× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Blanc | 1× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Rouge | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Noir | 10× |
| Brick 1 x 4 without Bottom Tubes | 3066 | Trans-noir | 1× |
| Tile 2 x 2 with Groove | 3068b | Blanc | 4× |
| Tile 2 x 2 with Groove | 3068b | Gris bleuté clair | 2× |
| Tile 1 x 2 with Groove | 3069b | Blanc | 24× |
| Tile 1 x 2 with Groove | 3069b | Rouge | 4× |
| Tile 1 x 2 with Groove | 3069b | Gris bleuté foncé | 1× |
| Tile 1 x 1 with Groove | 3070b | Blanc | 4× |
| Tile 1 x 1 with Groove | 3070b | Gris bleuté clair | 10× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Rouge | 4× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Gris bleuté clair | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Jaune | 2× |
| Technic Pin 3/4 | 32002 | Beige | 1× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Blanc | 4× |
| Technic Axle and Pin Connector Angled #6 - 90° | 32014 | Blanc | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Noir | 8× |
| Plate Special 1 x 2 with Door Rail | 32028 | Orange | 6× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Orange | 1× |
| Technic Axle 2 Notched | 32062 | Rouge | 3× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Blanc | 2× |
| Technic Beam 1 x 7 Thin | 32065 | Blanc | 1× |
| Technic Axle 5 | 32073 | Jaune | 1× |
| Technic Axle 5 | 32073 | Gris bleuté clair | 4× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Blanc | 6× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Noir | 2× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Noir | 1× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Blanc | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Noir | 2× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Rouge | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Blanc | 8× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Noir | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Gris bleuté clair | 9× |
| Technic Worm Gear Type 2 | 32905 | Gris bleuté clair | 1× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Blanc | 3× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Gris bleuté foncé | 4× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Blanc | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Noir | 18× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Noir | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Gris bleuté foncé | 11× |
| Tile Special 2 x 4 Inverted | 3395 | Blanc | 6× |
| Tile Special 2 x 4 Inverted | 3395 | Noir | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Blanc | 2× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Noir | 8× |
| Wheel 8 x 6 with Slot | 34337 | Gris bleuté clair | 2× |
| Plate 1 x 8 | 3460 | Rouge | 2× |
| Plate 1 x 8 | 3460 | Blanc | 7× |
| Plate 1 x 8 | 3460 | Jaune | 2× |
| Plate 1 x 8 | 3460 | Orange | 8× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Rouge | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Blanc | 10× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Bleu foncé | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Beige | 8× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Blanc | 2× |
| Cone 4 x 4 x 3 with Axle Hole | 3569 | Blanc | 2× |
| Brick 1 x 3 | 3622 | Blanc | 20× |
| Brick 1 x 3 | 3622 | Marron rougeâtre | 2× |
| Brick 1 x 3 | 3622 | Bleu foncé | 3× |
| Brick 1 x 3 | 3622 | Noir | 4× |
| Plate 1 x 3 | 3623 | Beige | 8× |
| Plate 1 x 3 | 3623 | Blanc | 8× |
| Plate 1 x 3 | 3623 | Noir | 8× |
| Plate 1 x 3 | 3623 | Rouge | 4× |
| Technic Gear 24 Tooth [New Style with Single Axle Hole] | 3648b | Gris bleuté foncé | 1× |
| Brick Arch 1 x 4 | 3659 | Gris bleuté clair | 6× |
| Plate 1 x 6 | 3666 | Blanc | 16× |
| Plate 1 x 6 | 3666 | Beige | 10× |
| Plate 1 x 6 | 3666 | Bleu foncé | 2× |
| Brick Special 2 x 6 x 1 1/3 with Axle Holes and 2 x 4 Recessed, Ridges at Underside | 3668 | Gris bleuté foncé | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Noir | 4× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Noir | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Rouge | 6× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Bleu foncé | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Noir | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Gris bleuté clair | 10× |
| Technic Axle 4 | 3705 | Rouge | 5× |
| Technic Axle 6 | 3706 | Rouge | 2× |
| Technic Axle 8 | 3707 | Noir | 1× |
| Technic Axle 12 | 3708 | Noir | 1× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Blanc | 2× |
| Plate 1 x 4 | 3710 | Bleu foncé | 2× |
| Plate 1 x 4 | 3710 | Noir | 29× |
| Plate 1 x 4 | 3710 | Gris bleuté clair | 3× |
| Plate 1 x 4 | 3710 | Blanc | 24× |
| Plate 1 x 4 | 3710 | Orange | 4× |
| Technic Bush | 3713 | Rouge | 2× |
| Technic Bush | 3713 | Gris bleuté clair | 2× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Beige | 2× |
| Plate 2 x 6 | 3795 | Noir | 2× |
| Plate 2 x 6 | 3795 | Rouge | 1× |
| Plate 2 x 6 | 3795 | Blanc | 14× |
| Plate 2 x 6 | 3795 | Beige | 2× |
| Plate 2 x 10 | 3832 | Noir | 2× |
| Cone 2 x 2 x 2, Open Stud | 3942c | Blanc | 2× |
| Plate 6 x 6 | 3958 | Blanc | 1× |
| Technic Pin Long without Friction Ridges, with Anti-Roll Notch | 39888 | Beige | 2× |
| Brick Special 1 x 1 with Headlight | 4070 | Noir | 4× |
| Brick Special 1 x 1 with Headlight | 4070 | Blanc | 2× |
| Tile 1 x 8 with Groove | 4162 | Blanc | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Gris bleuté clair | 3× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Gris bleuté foncé | 3× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Rouge | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Blanc | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Blanc | 1× |
| Brick Curved 6 x 1 Inverted | 42023 | Blanc | 2× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Gris bleuté clair | 1× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Noir | 7× |
| Wheel 11 x 8 with Center Groove | 42610 | Gris bleuté clair | 8× |
| Technic Pin 1/2 | 4274 | Blanc | 6× |
| Plate 2 x 16 | 4282 | Gris bleuté clair | 5× |
| Slope 33° 3 x 1 | 4286 | Bleu foncé | 1× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Noir | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Noir | 8× |
| Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Top | 43045 | Noir | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Noir | 3× |
| Technic Axle 7 | 44294 | Gris bleuté clair | 2× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Bleu foncé | 1× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Blanc | 18× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Marron rougeâtre | 4× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Noir | 3× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Rouge | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Blanc | 6× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Gris bleuté clair | 6× |
| Plate 1 x 10 | 4477 | Blanc | 14× |
| Plate 1 x 10 | 4477 | Gris bleuté clair | 8× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 44874 | Rouge | 1× |
| Technic Axle 3 | 4519 | Gris bleuté clair | 3× |
| Technic Axle 3 | 4519 | Jaune | 4× |
| Slope Curved 8 x 6 x 2 Double | 45411 | Blanc | 2× |
| Slope Curved 8 x 6 x 2 Double with 7 Light Bluish grey Airplane Windows print | 45411pr0004 | Blanc | 7× |
| Slope 1 x 6 x 1 with 1 x 2 x 1/3 Cutout | 4569 | Bleu foncé | 1× |
| Wedge Plate 12 x 3 Left | 47397 | Blanc | 2× |
| Wedge Plate 12 x 3 Left | 47397 | Orange | 2× |
| Wedge Plate 12 x 3 Right | 47398 | Blanc | 2× |
| Wedge Plate 12 x 3 Right | 47398 | Orange | 2× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Trans-orange | 4× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Gris bleuté foncé | 1× |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket | 48169 | Gris bleuté foncé | 1× |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] | 48171 | Noir | 1× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Blanc | 2× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Rouge | 1× |
| Wheel Arch, Mudguard 2 x 3 x 1 1/3 with 2 x 2 Plate | 49097 | Blanc | 1× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Jaune | 2× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Bleu foncé | 3× |
| Brick 1 x 4 x 3 | 49311 | Blanc | 6× |
| Wedge Curved 10 x 3 Left with Narrowing Red Stripe, Black 'Concorde' print | 50955pr0003 | Blanc | 1× |
| Wedge Curved 10 x 3 Right with Narrowing Red Stripe, Black 'Concorde' print | 50956pr0003 | Blanc | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Blanc | 18× |
| Technic Axle 8 with Stop | 55013 | Gris bleuté foncé | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Gris bleuté clair | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Jaune | 8× |
| Tyre 14 x 4 Smooth Small Single [New Style] | 59895 | Noir | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Blanc | 1× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Blanc | 1× |
| Slope 18° 4 x 1 | 60477 | Noir | 2× |
| Slope 18° 4 x 1 | 60477 | Blanc | 1× |
| Slope 18° 4 x 1 | 60477 | Bleu foncé | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Rouge | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Blanc | 11× |
| Plate 1 x 12 | 60479 | Rouge | 10× |
| Plate 1 x 12 | 60479 | Blanc | 6× |
| Slope 65° 2 x 1 x 2 | 60481 | Blanc | 12× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Noir | 4× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Blanc | 4× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Noir | 1× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Gris bleuté foncé | 4× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Blanc | 2× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Noir | 6× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Noir | 4× |
| Brick 1 x 10 | 6111 | Blanc | 12× |
| Brick 1 x 12 | 6112 | Gris bleuté clair | 2× |
| Brick 1 x 12 | 6112 | Blanc | 10× |
| Brick 1 x 12 | 6112 | Beige | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Noir | 22× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Blanc | 3× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Gris bleuté foncé | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rouge | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Jaune | 22× |
| Technic Pin with Dual Wheels Holder | 61483 | Gris bleuté clair | 1× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Gris bleuté foncé | 1× |
| Technic Universal Joint 3L [Complete Assembly] | 61903 | Gris bleuté clair | 1× |
| Panel 1 x 1 x 1 Corner | 6231 | Blanc | 2× |
| Cone 3 x 3 x 2 | 6233 | Blanc | 2× |
| Technic Pin Connector Round [Slotted] | 62462 | Rouge | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Orange | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Gris bleuté clair | 1× |
| Tile 1 x 3 | 63864 | Blanc | 5× |
| Tile 1 x 3 | 63864 | Jaune | 4× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Gris bleuté clair | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Jaune | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Gris bleuté clair | 4× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Blanc | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Noir | 2× |
| Wedge Plate 2 x 4 27° Right | 65426 | Blanc | 3× |
| Wedge Plate 2 x 4 27° Left | 65429 | Blanc | 3× |
| Technic Axle 3 with Stud | 6587 | Beige foncé | 2× |
| Tile Special 2 x 3 with 2 Clips without Tab between Clips | 65886 | Blanc | 2× |
| Technic Gear 12 Tooth Bevel | 6589 | Beige | 2× |
| Technic Beam 1 x 3 Thin | 6632 | Noir | 3× |
| Technic Beam 1 x 3 Thin | 6632 | Orange | 1× |
| Tile 1 x 6 with Groove | 6636 | Blanc | 8× |
| Tile 1 x 6 with Narrowing Red Stripe print | 6636pr0039 | Blanc | 2× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Blanc | 4× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Gris bleuté clair | 2× |
| Tile 2 x 6 | 69729 | Blanc | 9× |
| Tile 2 x 6 | 69729 | Noir | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Gris bleuté clair | 2× |
| Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 3 Support Walls on Bottom | 72132 | Blanc | 1× |
| Slope Inverted 45° 4 x 4 Double with 2 Holes | 72454 | Blanc | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Gris bleuté clair | 2× |
| Brick Round 3 x 3 x 2 Recessed Center with 2 x 2 Studs and Axle Hole | 73111 | Noir | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Gris bleuté foncé | 12× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Blanc | 6× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Blanc | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Bleu foncé | 1× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Gris bleuté clair | 6× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Noir | 6× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Noir | 2× |
| Plate 2 x 3 with 1 x 1 Cutout | 73831 | Gris bleuté clair | 1× |
| Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder | 76766 | Gris bleuté clair | 1× |
| Technic Pin Long 3l, No Friction Ridges, with Stop and Hole | 77765 | Gris bleuté clair | 6× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Noir | 15× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Blanc | 23× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Beige | 2× |
| Bar 2L with Stop in Center | 78258 | Blanc | 5× |
| Plate 1 x 5 | 78329 | Blanc | 2× |
| Wedge Plate 6 x 2 Left | 78443 | Blanc | 2× |
| Wedge Plate 6 x 2 Right | 78444 | Blanc | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Rouge | 8× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Noir | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Blanc | 45× |
| Brick Curved 1 x 4 x 2/3 Double, No Studs | 79756 | Blanc | 9× |
| Windscreen 2 x 4 Half Dome with Light Bluish Grey Cockpit print | 81911pr0001 | Trans-noir | 1× |
| Tile Special 4 x 8 Inverted with Gold 'Concorde', Stats on Black Background print | 83496pr0001 | Marron rougeâtre | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Blanc | 64× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Rouge | 4× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Blanc | 12× |
| Tile 2 x 4 with Groove | 87079 | Gris bleuté foncé | 9× |
| Tile 2 x 4 with Groove | 87079 | Marron rougeâtre | 2× |
| Tile 2 x 4 with Red Stripe print | 87079pr0317 | Blanc | 2× |
| Technic Axle 4 with Stop | 87083 | Gris bleuté foncé | 5× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Gris bleuté clair | 6× |
| Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | 87552 | Blanc | 4× |
| Bar 3L | 87994 | Or nacré | 4× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Blanc | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Blanc | 32× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs with Black/Red Air Intakes print | 88930pr0023 | Blanc | 1× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs with Black/Red Air Intakes print | 88930pr0024 | Blanc | 1× |
| Technic Pin 1/2 with Friction | 89678 | Rouge | 4× |
| Technic Pin 1/2 with Friction | 89678 | Gris bleuté foncé | 3× |
| Technic Panel Fairing 2 x 1 x 1 | 89679 | Nougat moyen | 12× |
| Brick Special 2 x 2 with Grooves and Axle Hole | 90258 | Noir | 1× |
| Plate 2 x 14 | 91988 | Gris bleuté clair | 1× |
| Tyre 17.5 x 6 with Shallow Staggered Treads and Middle Band | 92409 | Noir | 8× |
| Technic Axle and Pin Connector Perpendicular Split | 92907 | Gris bleuté clair | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Blanc | 6× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Blanc | 6× |
| Slope Curved 3 x 4 x 2/3 Triple Curved with 2 Sunk Studs | 93604 | Blanc | 1× |
| Brick and Axle Separator v2.0 | 96874 | Orange | 1× |
| Tile Round 1 x 1 | 98138 | Noir | 4× |
| Tile Round 1 x 1 | 98138 | Noir | 3× |
| Tile Round 1 x 1 | 98138 | Trans-jaune | 1× |
| Slope 75° 2 x 2 x 3 [Solid Studs] | 98560 | Gris bleuté foncé | 3× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Blanc | 31× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Noir | 5× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris bleuté clair | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Noir | 8× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Argent mat | 4× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Jaune | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Blanc | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Noir | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Blanc | 9× |
ADN du build
Apercu des pieces de Concorde
Avec 2 083 pieces, ce build est a -1% par rapport au set Icons moyen et a +264% par rapport a la sortie moyenne de 2023.
Par rapport au set Icons moyen
Set Icons moyen : 2 094 pieces sur 80 autres sets.
Par rapport au set moyen de 2023
Set moyen de 2023 : 573 pieces sur 506 autres sets.
Profil couleur
Couleur dominante
Blanc
Pieces uniques
7.9 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Plate 1 x 2
132xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.

![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061025.jpg)

![Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg)





