


Le set LEGO Icons Shelby Cobra 427 S/C (10357-1) recrée fidèlement la légendaire voiture de sport des années 1960, célébrée pour son design emblématique et ses performances de course. Ce modèle de 1248 pièces arbore une carrosserie bleue élégante, ornée des célèbres rayures de course blanches de Shelby, d'échappements latéraux distinctifs et d'une grille béante caractéristique. Les constructeurs apprécieront les éléments fonctionnels comme la direction opérationnelle, les portes ouvrantes, un moteur détaillé accessible via le capot ouvrant et un coffre ouvrant. L'ensemble comprend également une boîte à outils qui se range parfaitement dans le coffre, un extincteur pouvant être monté entre les sièges, un billet de 100 $ et un trophée, commémorant l'illustre histoire de la voiture sur piste. Cette réplique détaillée constitue une pièce de décoration automobile vintage distinguée.
Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Sticker Sheet for Set 10357-1 10113424 | Unknown | 1× |
![]() Bar Holder with Clip 11090 | Gris bleuté clair | 6× |
![]() Bar Holder with Clip 11090 | Noir | 3× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Blanc | 4× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Bleu foncé | 8× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Noir | 4× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Bleu foncé | 6× |
![]() Plate 3 x 3 11212 | Bleu foncé | 2× |
![]() Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle 11214 | Gris bleuté foncé | 4× |
![]() Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle 11214 | Rouge | 2× |
Affichage de 10 sur 341 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Noir | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Bleu foncé | 6× |
| Plate 3 x 3 | 11212 | Bleu foncé | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Gris bleuté foncé | 4× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Rouge | 2× |
| Sports Roller Skate | 11253 | Gris bleuté clair | 2× |
| Sports Roller Skate | 11253 | Or nacré | 1× |
| Tile Round 1 x 2 | 1126 | Trans-rouge | 2× |
| Tile Round 1 x 2 | 1126 | Gris bleuté clair | 1× |
| Tile Round 1 x 2 | 1126 | Gris bleuté foncé | 2× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Noir | 4× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Noir | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Bleu foncé | 7× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Blanc | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Gris bleuté foncé | 2× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Gris bleuté clair | 4× |
| Panel 1 x 4 x 2 with Side Supports - Hollow Studs | 14718 | Noir | 2× |
| Tile 2 x 2 Corner | 14719 | Bleu foncé | 10× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Argent métallique | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Noir | 9× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Bleu foncé | 19× |
| Slope Curved 2 x 2 x 2/3 with Dark Blue Stripe print | 15068pr0106 | Blanc | 1× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Blanc | 2× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Blanc | 1× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Noir | 1× |
| Tyre 49.53 x 20 | 15413 | Noir | 4× |
| Technic Steering Gear with 3 Towball Joints, Compact | 15460 | Gris bleuté foncé | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Bleu foncé | 8× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Blanc | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Or nacré | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Light Aqua | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Noir | 5× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Bleu foncé | 2× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Noir | 4× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Rouge foncé | 4× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Gris bleuté clair | 3× |
| Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts | 1750 | Bleu foncé | 4× |
| Tile 4 x 4 with Dark Blue Stripe print | 1751pr0019 | Blanc | 3× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Noir | 4× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Blanc | 6× |
| Plate Round Corners 2 x 6 Double | 18980 | Blanc | 2× |
| Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] | 1927 | Bleu foncé | 4× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Gris bleuté clair | 11× |
| Bar 2L with Towball | 22484 | Noir | 3× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Bleu foncé | 2× |
| Bar Holder with Hole and Bar Handle | 23443 | Bleu foncé | 1× |
| Brick 2 x 2 Corner | 2357 | Bleu foncé | 2× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Blanc | 2× |
| Plate 2 x 2 Corner | 2420 | Noir | 17× |
| Plate 2 x 2 Corner | 2420 | Noir | 1× |
| Tile Round 1 x 1 Half Circle | 24246 | Gris bleuté clair | 6× |
| Wedge Plate 2 x 2 Left | 24299 | Bleu foncé | 2× |
| Wedge Plate 2 x 2 Left | 24299 | Gris bleuté clair | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Gris bleuté clair | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Bleu foncé | 2× |
| Tile 1 x 4 with Groove | 2431 | Rouge | 2× |
| Technic Axle 3 with Stop | 24316 | Marron rougeâtre | 4× |
| Tile Special 1 x 2 with Handle | 2432 | Bleu foncé | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Bleu foncé | 2× |
| Windscreen 2 x 10 x 3 | 24607 | Trans-transparent | 1× |
| Plant, Flower, Plate Round 1 x 1 with 5 Petals | 24866 | Gris bleuté clair | 3× |
| Plant, Flower, Plate Round 1 x 1 with 5 Petals | 24866 | Rouge | 44× |
| Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | 25214 | Argent métallique | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Bleu foncé | 6× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Blanc | 2× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Gris bleuté clair | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Gris bleuté foncé | 6× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-transparent | 2× |
| Tile 2 x 3 | 26603 | Noir | 1× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Gris bleuté clair | 2× |
| Technic Axle Towball | 2736 | Gris bleuté clair | 2× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Noir | 2× |
| Technic Steering Wheel Small (3 Studs Diameter) | 2819 | Orange foncé | 1× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Noir | 2× |
| Brick Special 1 x 2 with Grille | 2877 | Gris bleuté clair | 5× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Noir | 1× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Noir | 2× |
| Brick 2 x 2 | 3003 | Noir | 3× |
| Handlebars | 30031 | Noir | 2× |
| Brick 1 x 2 | 3004 | Noir | 2× |
| Brick 1 x 2 | 3004 | Rouge | 2× |
| Brick 1 x 2 | 3004 | Light Aqua | 1× |
| Brick 1 x 1 | 3005 | Blanc | 2× |
| Brick 1 x 1 | 3005 | Bleu foncé | 2× |
| Brick 1 x 6 | 3009 | Bleu foncé | 2× |
| Plate 2 x 4 | 3020 | Bleu foncé | 6× |
| Plate 2 x 4 | 3020 | Rouge | 5× |
| Plate 2 x 4 | 3020 | Blanc | 1× |
| Plate 2 x 4 | 3020 | Noir | 1× |
| Plate 2 x 3 | 3021 | Bleu foncé | 2× |
| Plate 2 x 3 | 3021 | Gris bleuté clair | 7× |
| Plate 2 x 2 | 3022 | Noir | 6× |
| Plate 1 x 2 | 3023 | Bleu foncé | 45× |
| Plate 1 x 2 | 3023 | Beige | 25× |
| Brick Special 1 x 2 with Vertical Clip [Open O Clip] | 30237b | Gris bleuté clair | 3× |
| Plate 1 x 1 | 3024 | Bleu foncé | 28× |
| Plate 4 x 4 | 3031 | Noir | 1× |
| Plate 6 x 8 | 3036 | Gris bleuté foncé | 1× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Gris bleuté clair | 1× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Noir | 2× |
| Slope 45° 2 x 2 Double Convex | 3045 | Noir | 1× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Bleu foncé | 2× |
| Tile 2 x 2 with Groove | 3068b | Noir | 2× |
| Tile 1 x 2 with Groove | 3069b | Or nacré | 1× |
| Tile 1 x 2 with Groove | 3069b | Gris bleuté clair | 2× |
| Tile 1 x 2 with Groove | 3069b | Noir | 4× |
| Tile 1 x 2 with Groove | 3069b | Bleu foncé | 11× |
| Tile 1 x 2 with '100' Banknote Print | 3069bpr0100 | Gris bleuté clair | 1× |
| Tile 1 x 2 with Dark Blue Stripe print | 3069bpr9907 | Blanc | 1× |
| Tile 1 x 1 with Groove | 3070b | Bleu foncé | 9× |
| Tile 1 x 1 with Groove | 3070b | Blanc | 2× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Bleu foncé | 6× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Bleu foncé | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Blanc | 6× |
| Technic Pin 3/4 | 32002 | Beige | 2× |
| Technic Link 1 x 6 without Stoppers | 32005a | Noir | 2× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Noir | 4× |
| Technic Brick 1 x 14 [13 Pin Holes] | 32018 | Noir | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Bleu foncé | 4× |
| Technic Axle 2 Notched | 32062 | Rouge | 4× |
| Technic Beam 1 x 6 Thin | 32063 | Blanc | 1× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Blanc | 2× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Noir | 2× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Blanc | 4× |
| Technic Beam 1 x 5 Thick | 32316 | Blanc | 1× |
| Technic Beam 1 x 4 Thin | 32449 | Noir | 5× |
| Technic Brick 6 x 8 with 4 x 6 Opening | 32532 | Blanc | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Noir | 2× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Gris bleuté clair | 3× |
| Food Hot Dog / Sausage | 33078 | Or nacré | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Noir | 6× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Bleu foncé | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Noir | 8× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Noir | 13× |
| Plate 1 x 8 | 3460 | Gris bleuté foncé | 3× |
| Plate Special 4 x 4 with 3 x 3 Quarter Round Cutout | 35044 | Noir | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Marron rougeâtre | 2× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Bleu foncé | 2× |
| Brick 1 x 3 | 3622 | Bleu foncé | 4× |
| Plate 1 x 3 | 3623 | Noir | 5× |
| Plate 1 x 3 | 3623 | Bleu foncé | 11× |
| Plate Round 1 x 1 with Vertical Bar | 3661 | Noir | 1× |
| Slope Inverted 45° 2 x 1 | 3665 | Bleu foncé | 2× |
| Plate 1 x 6 | 3666 | Noir | 3× |
| Plate 1 x 6 | 3666 | Blanc | 4× |
| Brick Special 2 x 6 x 1 1/3 with Axle Holes and 2 x 4 Recessed, Ridges at Underside | 3668 | Gris bleuté foncé | 1× |
| Slope Inverted 45° 2 x 2 Double Convex | 3676 | Gris bleuté foncé | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Gris bleuté clair | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Noir | 4× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Bleu foncé | 4× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Noir | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Blanc | 2× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Rouge | 1× |
| Technic Axle 4 | 3705 | Rouge | 1× |
| Technic Axle 6 | 3706 | Noir | 1× |
| Plate 1 x 4 | 3710 | Blanc | 13× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Bleu foncé | 17× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Noir | 4× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Beige | 3× |
| Bar, Parallel Angled with 2 Connecting Bars (Train Hinge) | 37494 | Noir | 1× |
| Plate 2 x 6 | 3795 | Noir | 4× |
| Equipment Cup / Teacup | 38014 | Gris bleuté clair | 1× |
| Plate 2 x 10 | 3832 | Gris bleuté clair | 2× |
| Equipment Cup / Teacup Saucer with Recessed Stud on Top [PLAIN] | 38799 | Gris bleuté clair | 1× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Noir | 1× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Noir | 3× |
| Hinge Brick 1 x 2 Base | 3937 | Gris bleuté foncé | 2× |
| Plate Angled 3 x 3 with Heart Shape | 39613 | Bleu foncé | 2× |
| Brick Special 1 x 1 with Headlight | 4070 | Gris bleuté clair | 6× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Noir | 2× |
| Tile 1 x 8 with Groove | 4162 | Noir | 2× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Rouge | 1× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Gris bleuté clair | 4× |
| Wedge Plate 4 x 2 Right | 41769 | Gris bleuté clair | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Gris bleuté clair | 1× |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 42003 | Noir | 2× |
| Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection | 4287c | Bleu foncé | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Noir | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Gris bleuté clair | 7× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Bleu foncé | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Noir | 17× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | 44301b | Noir | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Noir | 4× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Bleu foncé | 2× |
| Plate 1 x 10 | 4477 | Gris bleuté clair | 1× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 44874 | Rouge | 3× |
| Tap 1 x 1 without Hole in Spout | 4599b | Gris bleuté clair | 1× |
| Bar 1 x 3 [Clip / Anti-Stud] | 4735 | Noir | 2× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Argent métallique | 1× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Rouge | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Gris bleuté clair | 2× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Rouge | 2× |
| Wheel Arch, Mudguard 2 x 3 x 1 1/3 with 2 x 2 Plate | 49097 | Bleu foncé | 2× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Gris bleuté clair | 1× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Bleu foncé | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Noir | 2× |
| Bracket 2 x 4 - 1 x 4 | 5175 | Blanc | 1× |
| Slope Inverted 45° 6 x 1 Double with 1 x 4 Recessed | 52501 | Rouge | 2× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Noir | 4× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Noir | 7× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Bleu foncé | 4× |
| Slope Curved 1 x 4 with Stud Notch Right | 5414 | Noir | 2× |
| Slope Curved 1 x 4 with Stud Notch Right | 5414 | Bleu foncé | 2× |
| Slope Curved 1 x 4 with Stud Notch Left | 5415 | Noir | 2× |
| Slope Curved 1 x 4 with Stud Notch Left | 5415 | Bleu foncé | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Noir | 2× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Rouge | 2× |
| Bracket 5 x 1 x 1 1/3 | 5712 | Noir | 2× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Bleu foncé | 23× |
| Brick Curved 2 x 4 x 1 | 5842 | Bleu foncé | 2× |
| Brick Curved 2 x 4 x 1 with Dark Blue Stripe print | 5842pr0001 | Blanc | 2× |
| Brick Round Corner, Curved 2 x 2 x 1 2/3 Quarter Dome with 1 Cutout | 5906 | Bleu foncé | 2× |
| Technic Axle 5.5 with Stop [Rounded Short End] | 59426 | Gris bleuté foncé | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Rouge | 1× |
| Cone 1 x 1 [Top Groove] | 59900 | Noir | 4× |
| Window 1 x 2 x 2 Plane, Hollow Studs, Single Hole Top and Bottom for Glass | 60032 | Noir | 1× |
| Tool Hammer Cross Pein [3-Rib Handle] | 604547 | Argent mat | 1× |
| Tool Oil Can [Ribbed Handle] | 604548 | Argent mat | 1× |
| Tool Drill / Impact Wrench, Cordless Electric | 604549 | Argent mat | 1× |
| Tool Screwdriver with Wide Head [3-Rib Handle] | 604550 | Argent mat | 1× |
| Tool Wrench / Spanner Open End [3-Rib Handle] | 604551 | Argent mat | 1× |
| Tool Wrench / Spanner, Box [3-Rib Handle] | 604552 | Argent mat | 1× |
| Tool Wrench 4-Way Lug | 604553 | Argent mat | 1× |
| Tool Wrench / Spanner Adjustable | 604614 | Argent mat | 1× |
| Tool Ratchet / Socket Wrench | 604615 | Argent mat | 1× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Gris bleuté clair | 10× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Noir | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Noir | 6× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Noir | 6× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Noir | 12× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Noir | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Noir | 19× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Noir | 2× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Argent métallique | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-orange | 3× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Noir | 3× |
| Bar 1 x 3 (Radio Handle, Phone Handset) | 6190 | Noir | 1× |
| Technic Universal Joint 3L [Complete Assembly] | 61903 | Gris bleuté clair | 1× |
| Panel 1 x 1 x 1 Corner | 6231 | Noir | 4× |
| Panel 1 x 1 x 1 Corner | 6231 | Blanc | 2× |
| Panel 1 x 1 x 1 Corner | 6231 | Rouge | 2× |
| Technic Pin Connector Round [Slotted] | 62462 | Rouge | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Argent métallique | 10× |
| Tile 1 x 3 | 63864 | Bleu foncé | 3× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Rouge | 2× |
| Wedge Curved 4 x 3 No Studs [Plain] | 64225 | Bleu foncé | 2× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Rouge | 1× |
| Technic Steering Arm 5.5 x 2 with Towball Socket Rounded, Chamfered [Reinforced] | 64872 | Gris bleuté foncé | 4× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Orange | 2× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Gris bleuté clair | 7× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Noir | 6× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Gris bleuté clair | 4× |
| Technic Pin Connector Hub Perpendicular 3L with 4 Pins (Squared Holes) | 65489 | Gris bleuté clair | 2× |
| Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) | 65509 | Rouge | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Gris bleuté foncé | 2× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Noir | 1× |
| Technic Beam 1 x 9 Bent (6 - 4) Thick | 6629 | Gris bleuté foncé | 2× |
| Tile 1 x 6 with Groove | 6636 | Noir | 2× |
| Tile Round 2 x 4 | 66857 | Noir | 1× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rouge | 2× |
| Weapon Hilt Symmetric | 66909 | Or nacré | 2× |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 68568 | Noir | 2× |
| Brick Curved 1 x 1 | 7126 | Noir | 2× |
| Brick Curved 1 x 1 | 7126 | Gris bleuté clair | 2× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Beige | 1× |
| Slope Curved 1 x 4 with Stud Notch Right | 7205 | Bleu foncé | 11× |
| Slope Curved 1 x 4 with Stud Notch Left | 7206 | Bleu foncé | 11× |
| Wheel Arch, Mudguard 8 x 4 x 1 | 7207 | Bleu foncé | 4× |
| Wheel 30.4 x 20, 6 Spokes | 7301 | Gris bleuté clair | 4× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Noir | 10× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Noir | 4× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Blanc | 4× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Bleu foncé | 2× |
| Plate 2 x 3 with 1 x 1 Cutout | 73831 | Noir | 8× |
| Hose Rigid 3mm D. 13L / 10.4cm | 75c13 | Gris bleuté clair | 1× |
| Technic Pin Long 3l, No Friction Ridges, with Stop and Hole | 77765 | Gris bleuté clair | 1× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Gris bleuté foncé | 2× |
| Tile Round 1 x 1 Special with Clip-Bar | 77813 | Gris bleuté clair | 3× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Noir | 7× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Rouge | 2× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Blanc | 2× |
| Plate Special 1 x 1 with Handle on 2 Ends | 78257 | Noir | 4× |
| Bar 2L with Stop in Center | 78258 | Gris bleuté clair | 1× |
| Plate 1 x 5 | 78329 | Bleu foncé | 4× |
| Plate 1 x 5 | 78329 | Rouge | 2× |
| Wedge Plate 6 x 2 Left | 78443 | Bleu foncé | 2× |
| Wedge Plate 6 x 2 Right | 78444 | Bleu foncé | 2× |
| Brick Curved 2 x 1 with Inverted Cutout | 78666 | Blanc | 2× |
| Brick Curved 2 x 1 with Inverted Cutout | 78666 | Bleu foncé | 6× |
| Brick Curved 2 x 1 with Inverted Cutout | 78666 | Noir | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Noir | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Gris bleuté clair | 2× |
| Tile 3 x 3 Curved, Macaroni | 79393 | Bleu foncé | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Bleu foncé | 6× |
| Equipment Cutlery - Fork | 79741 | Argent mat | 1× |
| Equipment Cutlery - Spoon, Flat Bottom | 80179 | Argent mat | 2× |
| Plate Round 1 x 1 with Open Stud | 85861 | Gris bleuté clair | 2× |
| Plate Round 1 x 1 with Open Stud | 85861 | Noir | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Noir | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Bleu foncé | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Gris bleuté clair | 4× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Blanc | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Rouge | 4× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Noir | 2× |
| Tile 2 x 4 with Groove | 87079 | Blanc | 2× |
| Tile 2 x 4 with Groove | 87079 | Noir | 2× |
| Tile 2 x 4 with Dark Blue Stripe print | 87079pr9857 | Blanc | 1× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Bleu foncé | 4× |
| Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | 87552 | Noir | 2× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Noir | 1× |
| Wedge 2 x 2 Facet | 87620 | Noir | 2× |
| Bar 3L | 87994 | Rouge | 1× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Gris bleuté clair | 2× |
| Equipment Whip - Bent | 88704 | Noir | 2× |
| Technic Pin 1/2 with Friction | 89678 | Gris bleuté foncé | 6× |
| Plate Special 6 x 8 Trap Door Frame Horizontal [Long Pin Holders] | 92107 | Gris bleuté clair | 1× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Gris bleuté foncé | 1× |
| Sports Ice Skate | 93555 | Argent mat | 4× |
| Slope Curved 4 x 2 No Studs with Dark Blue Stripe, Red Cobra Badge print | 93606pr0024 | Blanc | 2× |
| Brick and Axle Separator v2.0 | 96874 | Orange | 1× |
| Tile Round 1 x 1 | 98138 | Blanc | 11× |
| Tile Round 1 x 1 | 98138 | Trans-transparent | 2× |
| Tile Round 1 x 1 with Gauge Print | 98138pr0186 | Gris bleuté clair | 3× |
| Tile Round 1 x 1 with Red Cobra Badge print | 98138pr0444 | Argent mat | 1× |
| Spoiler 2 x 4 with Handle [Plain] | 98834 | Noir | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Bleu foncé | 7× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Blanc | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Noir | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Bleu foncé | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Noir | 10× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Blanc | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Noir | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Rouge | 6× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Bleu foncé | 2× |
ADN du build
Apercu des pieces de Shelby Cobra 427 S/C
Avec 1 248 pieces, ce build est a -41% par rapport au set Icons moyen et a +96% par rapport a la sortie moyenne de 2025.
Par rapport au set Icons moyen
Set Icons moyen : 2 105 pieces sur 80 autres sets.
Par rapport au set moyen de 2025
Set moyen de 2025 : 636 pieces sur 561 autres sets.
Profil couleur
Couleur dominante
Noir
Pieces uniques
4.6 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Plate 1 x 2
70xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.



![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6045936.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6042956.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037746.jpg)



