


Voyagez dans les années folles avec le magnifique LEGO® Icons Ford Model T (11376-1). Cette réplique authentique capture l'esprit pionnier, dotée d'un toit en tissu rabattable et d'un habitacle conducteur méticuleusement détaillé avec une direction fonctionnelle. Découvrez des fonctions ingénieuses comme le pare-brise divisé rabattable, une seule porte passager ouvrante et un coffre arrière qui s'ouvre. Soulevez les panneaux du capot pour révéler le moteur avec un ventilateur tournant activé par une manivelle, ou jetez un œil sous le siège pour accéder au réservoir d'essence. Fini avec une carrosserie noire classique, d'élégants accents dorés et de hautes jantes à rayons avec des pneus en caoutchouc blancs et minces, ce chef-d'œuvre automobile vintage constitue une pièce d'exposition élégante et nostalgique pour tout amateur de voitures américaines classiques.
Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Radiator Grille 1x2 2412 | Noir | 6× |
![]() Plate 2 x 2 Corner 2420 | Noir | 4× |
![]() Tile 1 x 4 with Groove 2431 | Noir | 3× |
![]() Plate Special 2 x 2 with 2 Pin Holes 2817 | Noir | 5× |
![]() Brick Special 1 x 2 with Grille 2877 | Noir | 4× |
![]() Brick 1 x 2 3004 | Noir | 2× |
![]() Brick 1 x 1 3005 | Noir | 2× |
![]() Brick 1 x 4 3010 | Noir | 2× |
![]() Plate 2 x 4 3020 | Noir | 4× |
![]() Plate 2 x 3 3021 | Noir | 10× |
Affichage de 10 sur 309 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Brick 1 x 2 | 3004 | Noir | 2× |
| Brick 1 x 1 | 3005 | Noir | 2× |
| Brick 1 x 4 | 3010 | Noir | 2× |
| Plate 2 x 4 | 3020 | Noir | 4× |
| Plate 2 x 3 | 3021 | Noir | 10× |
| Plate 2 x 2 | 3022 | Noir | 12× |
| Plate 1 x 2 | 3023 | Noir | 18× |
| Plate 1 x 1 | 3024 | Noir | 10× |
| Plate 6 x 10 | 3033 | Noir | 1× |
| Plate 2 x 8 | 3034 | Noir | 1× |
| Slope 45? 2 x 2 | 3039 | Noir | 1× |
| FLAT TILE 1X2 | 3069 | Noir | 10× |
| FLAT TILE 1X1 | 3070 | Noir | 10× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Noir | 4× |
| Plate 1 x 8 | 3460 | Noir | 1× |
| Plate 1 x 3 | 3623 | Noir | 5× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Noir | 1× |
| Plate 1 x 4 | 3710 | Noir | 16× |
| Plate 2 x 6 | 3795 | Noir | 2× |
| Plate 6 x 6 | 3958 | Noir | 4× |
| PLATE 2X2 ROUND | 4032 | Noir | 1× |
| Brick Special 1 x 1 Studs on 4 Sides | 4733 | Noir | 3× |
| BRICK Ø16 W. CROSS | 6143 | Noir | 1× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Noir | 2× |
| Tile 1 x 6 with Groove | 6636 | Noir | 10× |
| Wedge Plate 4 x 2 Right | 41769 | Noir | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Noir | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Noir | 6× |
| Plate Round Corner 3 x 3 | 30357 | Noir | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Noir | 4× |
| Plate 4 x 4 | 3031 | Noir | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Noir | 8× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Noir | 3× |
| Plate 1 x 12 | 60479 | Noir | 6× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Noir | 10× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Noir | 1× |
| Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 60581 | Noir | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Noir | 6× |
| Tile 2 x 4 with Groove | 87079 | Noir | 6× |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 85080 | Noir | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Noir | 9× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Noir | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Noir | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Noir | 10× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Noir | 3× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Noir | 3× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Noir | 1× |
| PLATE 3X4 WITH 4 KNOBS | 17836 | Noir | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Noir | 1× |
| SHAFT 3M Ø3.2 | 17715 | Noir | 6× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Noir | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Noir | 7× |
| Wedge Plate 2 x 2 Left | 24299 | Noir | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Noir | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Noir | 1× |
| Tile 2 x 3 | 26603 | Noir | 4× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Noir | 1× |
| STICK 6M W/FLANGE | 28921 | Noir | 2× |
| Plate 3 x 3 | 11212 | Noir | 2× |
| Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | 25214 | Noir | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Noir | 14× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Noir | 2× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Noir | 6× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Noir | 5× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Noir | 8× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Noir | 6× |
| BAD ROBOT ARM | 49753 | Noir | 4× |
| Wedge Sloped 45° 4 x 2 Left | 43721 | Noir | 1× |
| Wedge Sloped 45° 4 x 2 Right | 43720 | Noir | 1× |
| Equipment Candlestick | 37762 | Noir | 8× |
| PLATE 1X1 W/HOLDER VERTICAL | 52738 | Noir | 2× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Noir | 2× |
| HOLDER Ø3.2 W/TUBE Ø3.2 HOLE | 44873 | Noir | 4× |
| Tile 2 x 6 | 69729 | Noir | 2× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Noir | 2× |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 68568 | Noir | 4× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Noir | 2× |
| PLATE 1X1 W. HOLDER | 44860 | Noir | 2× |
| Weapon Hilt Symmetric | 66909 | Noir | 4× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Noir | 2× |
| Plate 1x1 with Up Right Holder | 44842 | Noir | 2× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Noir | 4× |
| Bar Holder with Clip and 90° Angle (Mechanical Leg) | 72869 | Noir | 2× |
| Plate 1 x 5 | 78329 | Noir | 4× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Noir | 2× |
| Tile Special 2 x 3 with 2 Clips without Tab between Clips | 65886 | Noir | 2× |
| Propeller 3 Blade 3 Diameter with Pin Hole | 65768 | Noir | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Noir | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Noir | 4× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Noir | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Noir | 2× |
| Plate 3 x 3 Corner | 77844 | Noir | 3× |
| BRICK 4X6, W/ 4.85 HOLE, CUT OUT | 1679 | Noir | 1× |
| Bracket 1 x 6 - 2 x 6 Inverted | 5090 | Noir | 1× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Noir | 4× |
| Sports Hockey Stick | 64000 | Noir | 1× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Noir | 1× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Noir | 2× |
| Slope Curved 2 x 2 with Stud Notch Left | 5095 | Noir | 1× |
| Slope Curved 2 x 2 with Stud Notch Right | 5093 | Noir | 1× |
| Tile Round 2 x 2 Half Circle | 5520 | Noir | 4× |
| Brick Curved 1 x 2 x 1 2/3 with 1 Cutout | 5907 | Noir | 8× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Noir | 5× |
| Cone 1 x 1 Inverted with Bar at Bottom (Ice Cream Cone) | 11610 | Noir | 2× |
| Brick Curved 1 x 1 | 7126 | Noir | 2× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Noir | 10× |
| Brick Arch 1 x 5 x 3 1/3 Curved Top | 5845 | Noir | 4× |
| Brick Round Corner, Curved 2 x 2 x 1 2/3 Quarter Dome with 1 Cutout | 5906 | Noir | 2× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Noir | 6× |
| Slope 45° 2 x 4 with 2/3 Inverted Cutout and no Studs | 5540 | Noir | 2× |
| Slope 1 x 4 with 1 x 2 Cutout | 5654 | Noir | 4× |
| Technic Axle 4 | 3705 | Noir | 1× |
| Technic Axle 6 | 3706 | Noir | 3× |
| Technic Axle 2 Notched | 32062 | Noir | 4× |
| Technic Beam 1 x 3 Thick | 32523 | Noir | 2× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Noir | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Noir | 4× |
| Technic Beam 1 x 13 Thick | 41239 | Noir | 2× |
| T-PIECE | 4697 | Noir | 2× |
| DOUBLE Ø4.85 HOLE W.Ø3.2 SHAFT | 29173 | Noir | 2× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Noir | 1× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Noir | 10× |
| CROSS HOLES W/ DOUBLE, DIA. 3.2 SHAFT | 49133 | Noir | 6× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Noir | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Noir | 2× |
| Wheel 11 x 8 with Center Groove | 42610 | Noir | 1× |
| Technic Beam 3 x 0.5 Liftarm with Boss and Blocked, Squared Pin Hole | 61408 | Noir | 1× |
| Technic Pin Connector 3L with 2 Pins and Center Hole [Pin Ridges Across Part] | 46189 | Noir | 1× |
| LEVER 5M | 44864 | Noir | 4× |
| BUSH FOR CROSS AXLE | 42798 | Noir | 8× |
| TECHNIC LEVER 2M | 44862 | Noir | 2× |
| TOGGEL JOINT | 3182 | Noir | 2× |
| Technic Link 1 x 8 | 5996 | Noir | 1× |
| Plate 1 x 4 | 3710 | Beige | 1× |
| Plate 1 x 2 | 3023 | Beige | 13× |
| Plate 2 x 4 | 3020 | Beige | 6× |
| Plate 2 x 3 | 3021 | Beige | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Beige | 3× |
| Brick 1 x 3 | 3622 | Beige | 4× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Beige | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Beige | 1× |
| Technic Gear 12 Tooth Bevel | 6589 | Beige | 1× |
| CONNECTOR PEG/CROSS AXLE | 6562 | Beige | 1× |
| Technic Axle 4 with Centre Stop | 99008 | Beige | 4× |
| Technic Pin 3/4 | 32002 | Beige | 5× |
| TECHNIC LEVER 2M | 44862 | Beige | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Noir | 4× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Noir | 6× |
| ELEMENT SEPARATOR | 31510 | Orange | 1× |
| Technic Rubber Belt 24mm | 85544 | Rouge | 1× |
| Technic Axle 8 | 3707 | Rouge | 1× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rouge | 1× |
| Technic Pin 1/2 with Friction | 89678 | Rouge | 2× |
| Technic Axle 5 | 32073 | Jaune | 4× |
| ENGINE 1X2 HALF BEAM, W/ CROSS AXLE | 8232 | Jaune | 2× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Gris bleuté clair | 1× |
| Technic Steering Wheel Small (3 Studs Diameter) | 2819 | Gris bleuté clair | 1× |
| Plate 2 x 2 Corner | 2420 | Gris bleuté foncé | 4× |
| Plate 2 x 10 | 3832 | Gris bleuté foncé | 1× |
| Plate 1 x 1 | 3024 | Gris bleuté foncé | 6× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Gris bleuté foncé | 1× |
| Plate 2 x 8 | 3034 | Gris bleuté foncé | 2× |
| Plate 1 x 4 | 3710 | Gris bleuté foncé | 5× |
| Plate 2 x 6 | 3795 | Gris bleuté foncé | 1× |
| Plate 2 x 3 | 3021 | Gris bleuté foncé | 3× |
| FLAT TILE 1X2 | 3069 | Gris bleuté foncé | 2× |
| Plate 1 x 6 | 3666 | Gris bleuté foncé | 2× |
| Plate 1 x 2 | 3023 | Gris bleuté foncé | 2× |
| Plate 2 x 4 | 3020 | Gris bleuté foncé | 2× |
| Plate 2 x 2 | 3022 | Gris bleuté foncé | 2× |
| Brick 1 x 1 | 3005 | Gris bleuté foncé | 2× |
| Brick 1 x 6 | 3009 | Gris bleuté foncé | 1× |
| Plate 1 x 3 | 3623 | Gris bleuté foncé | 11× |
| Plate 4 x 4 | 3031 | Gris bleuté foncé | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Gris bleuté foncé | 4× |
| Plate Special 4 x 6 with Trap Door Hinge [Long Pins] | 92099 | Gris bleuté foncé | 1× |
| Plate 3 x 3 | 11212 | Gris bleuté foncé | 4× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Gris bleuté foncé | 1× |
| PLATE 2X2 W 1 KNOB | 23893 | Gris bleuté foncé | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Gris bleuté foncé | 4× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Gris bleuté foncé | 6× |
| PLATE 1X1 W. HOLDER | 44860 | Gris bleuté foncé | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris bleuté foncé | 1× |
| SPACE SKELETON ARM | 49754 | Gris bleuté foncé | 4× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Gris bleuté foncé | 2× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Gris bleuté foncé | 4× |
| HOLDER Ø3.2 W/TUBE Ø3.2 HOLE | 44873 | Gris bleuté foncé | 2× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Gris bleuté foncé | 1× |
| Bar 2L with Stop in Center | 78258 | Gris bleuté foncé | 7× |
| FLAT TILE 1X1, 1/2 CIRCLE | 35399 | Gris bleuté foncé | 32× |
| 3.2 SHAFT W/ 5.9 BALL | 67692 | Gris bleuté foncé | 2× |
| LIGHT SWORD - BLADE | 21462 | Gris bleuté foncé | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Gris bleuté foncé | 6× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Gris bleuté foncé | 4× |
| Plate Round 1 x 1 with Hollow Stud and Bar on Underside - Long Space | 79194 | Gris bleuté foncé | 4× |
| Weapon Gun / Pistol Two Barrel, 8 Ribs | 6018 | Gris bleuté foncé | 1× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Gris bleuté foncé | 1× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Gris bleuté foncé | 2× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Gris bleuté foncé | 1× |
| Technic Axle 4 with Stop | 87083 | Gris bleuté foncé | 1× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Gris bleuté foncé | 2× |
| Technic Pin 1/2 with Friction | 89678 | Gris bleuté foncé | 5× |
| Technic Beam 1 x 11 Thick with Alternating Holes | 73507 | Gris bleuté foncé | 2× |
| Plate 1 x 3 | 3623 | Noir | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Argent métallique | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Gris bleuté clair | 2× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Gris bleuté clair | 4× |
| Tile Special 1 x 2 with Handle | 2432 | Gris bleuté clair | 1× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Gris bleuté clair | 4× |
| Plate 2 x 4 | 3020 | Gris bleuté clair | 2× |
| Plate 1 x 2 | 3023 | Gris bleuté clair | 2× |
| Plate 1 x 1 | 3024 | Gris bleuté clair | 2× |
| Plate 1 x 6 | 3666 | Gris bleuté clair | 3× |
| PLATE 2X2 ROUND | 4032 | Gris bleuté clair | 13× |
| Brick Special 1 x 1 with Headlight | 4070 | Gris bleuté clair | 8× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gris bleuté clair | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Gris bleuté clair | 4× |
| Technic Brick 4 x 4 with 2 x 2 Opening | 32324 | Gris bleuté clair | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Gris bleuté clair | 4× |
| Brick Round 2 x 2 [Grill] | 92947 | Gris bleuté clair | 1× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Gris bleuté clair | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Gris bleuté clair | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Gris bleuté clair | 2× |
| STICK 6M W/FLANGE | 28921 | Gris bleuté clair | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Gris bleuté clair | 1× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Gris bleuté clair | 2× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Gris bleuté clair | 2× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Gris bleuté clair | 4× |
| PLATE 1X1 W. HOLDER | 44860 | Gris bleuté clair | 2× |
| Exhaust Pipe with Technic Pin - Flat End, Squared Hole | 65571 | Gris bleuté clair | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Gris bleuté clair | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Gris bleuté clair | 2× |
| BRICK 2X2 ROUND W/ HOLE Ø4,85 | 79566 | Gris bleuté clair | 1× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Gris bleuté clair | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Gris bleuté clair | 1× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Gris bleuté clair | 1× |
| Technic Pin 1/2 | 4274 | Gris bleuté clair | 1× |
| Technic Axle 3 | 4519 | Gris bleuté clair | 2× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Gris bleuté clair | 2× |
| 1/2 BUSH | 42136 | Gris bleuté clair | 23× |
| Technic Gear 20 Tooth Bevel | 32198 | Gris bleuté clair | 4× |
| TECHNIC LEVER 3M | 65123 | Gris bleuté clair | 1× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Gris bleuté clair | 1× |
| Technic Pin Connector Hub Perpendicular 3L with 2 Pins | 2393 | Gris bleuté clair | 2× |
| BALL W. CROSS AXLE | 3985 | Gris bleuté clair | 3× |
| Plate 1 x 2 | 3023 | Noir | 4× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Noir | 2× |
| ROUND BRICK 1X1 | 3062 | Marron rougeâtre | 2× |
| Brick 2 x 2 Corner | 2357 | Noir | 1× |
| Brick 2 x 4 | 3001 | Noir | 1× |
| Slope 45? 2 x 2 | 3039 | Noir | 1× |
| Brick 2 x 2 | 3003 | Noir | 2× |
| Plate 2 x 8 | 3034 | Noir | 1× |
| Plate 2 x 2 Corner | 2420 | Noir | 2× |
| Brick 2 x 3 | 3002 | Noir | 2× |
| Plate 1 x 8 | 3460 | Noir | 1× |
| Plate 6 x 6 | 3958 | Noir | 1× |
| Plate 1 x 1 | 3024 | Noir | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Noir | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Noir | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Noir | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Marron rougeâtre | 6× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Noir | 4× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Noir | 4× |
| Tile 2 x 3 | 26603 | Noir | 1× |
| FLAT TILE 1X1, 1/2 CIRCLE | 35399 | Marron rougeâtre | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Noir | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Noir | 6× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Noir | 8× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Marron rougeâtre | 6× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Noir | 2× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Noir | 1× |
| Technic Axle 3 with Stop | 24316 | Marron rougeâtre | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Beige foncé | 6× |
| FLAT TILE 1X1, ROUND | 35381 | Beige foncé | 1× |
| Equipment Cutlery - Fork | 79741 | Argent mat | 2× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Pearl Titanium | 1× |
| KITCHEN EQUIPMENT, NO. 9 | 3576 | Trans-transparent | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 29387 | Trans-transparent | 2× |
| FLAT TILE 1X1 | 35403 | Trans-transparent | 6× |
| FLAT TILE 1X1, ROUND | 35380 | Trans-bleu clair | 3× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Jaune | 6× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Jaune | 1× |
| FLAT TILE 1X2 | 3069 | Medium Lime | 2× |
| Equipment Hose Nozzle / Gun with Side String Hole Simplified | 60849 | Jaune | 2× |
| FEZ | 29175 | Medium Lime | 1× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Medium Lime | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Medium Lime | 1× |
| Plate 1 x 2 | 3023 | Jaune | 3× |
| Plate 1x1 with Up Right Holder | 44842 | Medium Lime | 3× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Jaune | 2× |
| Brick Round 2 x 2 Dome Bottom [Open Stud] | 15395 | Orange clair vif | 2× |
| Equipment Sextant | 30154 | Or nacré | 1× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Jaune | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Jaune | 2× |
| FLAT TILE 1X1, ROUND, NO. 326 | 110030 | Medium Lime | 1× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Jaune | 1× |
| Plate 1 x 8 | 3460 | Blanc | 2× |
| Plate 1 x 4 | 3710 | Blanc | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Blanc | 6× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Blanc | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Blanc | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Blanc | 1× |
| Technic Axle Pin 3L without Friction Ridges and 2L Axle | 65249 | Blanc | 2× |
ADN du build
Apercu des pieces de Ford Model T
Avec 1 060 pieces, ce build est a -50% par rapport au set Icons moyen et a +69% par rapport a la sortie moyenne de 2026.
Par rapport au set Icons moyen
Set Icons moyen : 2 107 pieces sur 80 autres sets.
Par rapport au set moyen de 2026
Set moyen de 2026 : 627 pieces sur 427 autres sets.
Profil couleur
Couleur dominante
Noir
Pieces uniques
4.4 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Plate 1 x 2
42xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.









