Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Gris bleuté clair | 1× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Noir | 2× |
![]() Tile Special 2 x 2 Inverted 11203 | Blanc | 1× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Gris bleuté clair | 9× |
![]() Plate 3 x 3 11212 | Gris bleuté foncé | 2× |
![]() Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle 11214 | Gris bleuté foncé | 4× |
![]() Plate Special 1 x 2 with Pin Hole on Top 11458 | Gris bleuté foncé | 4× |
![]() Plate Special 1 x 2 with Clip Horizontal on Side 11476 | Blanc | 1× |
![]() Plate Special 1 x 2 with Clip Horizontal on Side 11476 | Gris bleuté clair | 2× |
![]() Slope Curved 2 x 1 No Studs [1/2 Bow] 11477 | Noir | 4× |
Affichage de 10 sur 283 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Gris bleuté foncé | 4× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Gris bleuté foncé | 4× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Blanc | 1× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Gris bleuté clair | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Noir | 4× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Argent mat | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Blanc | 2× |
| Slope Curved 4 x 1 Inverted | 13547 | Noir | 4× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Noir | 6× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Gris bleuté clair | 9× |
| Brick Arch 1 x 12 x 3 Raised Arch | 14707 | Blanc | 3× |
| Tile 2 x 2 Corner | 14719 | Blanc | 4× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Jaune | 3× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Blanc | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Noir | 11× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Gris bleuté foncé | 4× |
| Launcher, Weapon Gun / Blaster / Shooter Mini | 15391 | Blanc | 2× |
| Launcher Trigger, Weapon Gun Trigger | 15392 | Gris bleuté foncé | 2× |
| Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | 15400 | Gris bleuté foncé | 1× |
| Minifig Neckwear Backpack with Horizontal Pin Hole | 15406 | Noir | 1× |
| Brick Special 1 x 1 with Stud on Side and Conductive Element on Opposite Side | 15411 | Noir | 4× |
| Technic Axle 5 with Stop | 15462 | Beige foncé | 4× |
| Tile Round 2 x 2 with Hole | 15535 | Gris bleuté foncé | 2× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Noir | 2× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Gris bleuté foncé | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Noir | 4× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Blanc | 1× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Noir | 8× |
| Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 18575 | Noir | 2× |
| Launcher Trigger, Weapon Rapid Shooter, Flat Axle Hole | 18587 | Gris bleuté clair | 2× |
| Launcher, Weapon Rapid Shooter Six Barrel, 3 Fingers | 18588 | Blanc | 2× |
| Plate Special 1 x 2 with Handles on Ends | 18649 | Noir | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Noir | 1× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Gris bleuté foncé | 2× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Blanc | 1× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Gris bleuté clair | 6× |
| Windscreen 6 x 10 x 4 Curved | 18729 | Trans-bleu clair | 2× |
| Technic Driving Ring Connector | 18948 | Blanc | 2× |
| Projectile, Bar 8L with Black Arrow End (Spring Shooter Dart) | 19020 | Trans-orange | 1× |
| Equipment Radio [Extended Handle, Expanded Speaker Grille] | 19220 | Noir | 1× |
| Sticker Sheet for Set 70173-1 | 21705 | Unknown | 1× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Gris bleuté foncé | 20× |
| Tile 1 x 4 with Groove | 2431 | Gris bleuté foncé | 6× |
| Tile 1 x 4 with Groove | 2431 | Noir | 4× |
| Tile 1 x 4 with Groove | 2431 | Trans-bleu clair | 12× |
| Tile Special 1 x 2 with Handle | 2432 | Blanc | 10× |
| Windscreen 3 x 4 x 1 1/3 with 2 Studs on Top | 2437 | Trans-bleu clair | 2× |
| Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs] | 2444 | Blanc | 1× |
| Plate 2 x 12 | 2445 | Gris bleuté foncé | 3× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Noir | 2× |
| Tile Special 2 x 2 with Top Pin | 2460 | Noir | 1× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Gris bleuté foncé | 14× |
| Antenna 8H Whip | 2569 | Noir | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-orange | 2× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Noir | 4× |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | 2780 | Noir | 41× |
| Brick Special 1 x 2 with Grille | 2877 | Noir | 4× |
| Brick 2 x 4 | 3001 | Blanc | 4× |
| Brick 2 x 3 | 3002 | Gris bleuté clair | 6× |
| Brick 2 x 2 | 3003 | Gris bleuté foncé | 4× |
| Handlebars | 30031 | Gris bleuté foncé | 2× |
| Brick 1 x 2 | 3004 | Gris bleuté foncé | 6× |
| Brick 1 x 2 | 3004 | Blanc | 10× |
| Brick 2 x 8 | 3007 | Noir | 1× |
| Brick 1 x 8 | 3008 | Noir | 4× |
| Brick 1 x 6 | 3009 | Gris bleuté clair | 14× |
| Brick 1 x 4 | 3010 | Noir | 3× |
| Plate 2 x 4 | 3020 | Gris bleuté clair | 19× |
| Plate 2 x 4 | 3020 | Noir | 1× |
| Plate 2 x 3 | 3021 | Gris bleuté foncé | 10× |
| Plate 2 x 2 | 3022 | Noir | 2× |
| Plate 2 x 2 | 3022 | Blanc | 8× |
| Plate 1 x 2 | 3023 | Trans-bleu clair | 6× |
| Plate 1 x 2 | 3023 | Blanc | 26× |
| Brick Special 1 x 2 with Handle | 30236 | Blanc | 1× |
| Road Sign Clip-on 2 x 2 Round | 30261 | Blanc | 2× |
| Plate 6 x 12 | 3028 | Gris bleuté foncé | 4× |
| Plate 4 x 10 | 3030 | Noir | 1× |
| Equipment Space Binoculars / Scanner / Electrobinoculars | 30304 | Gris bleuté foncé | 1× |
| Plate 4 x 4 | 3031 | Gris bleuté foncé | 2× |
| Plate 4 x 4 | 3031 | Noir | 6× |
| Plate 6 x 10 | 3033 | Noir | 1× |
| Plate 2 x 8 | 3034 | Gris bleuté foncé | 10× |
| Equipment Flotation Ring [Life Preserver] | 30340 | Blanc | 4× |
| Plate 4 x 8 | 3035 | Noir | 5× |
| Tile Special 2 x 3 with 2 Clips [Thick Open O Clips] | 30350b | Noir | 4× |
| Plate 6 x 8 | 3036 | Gris bleuté foncé | 2× |
| Slope 18° 4 x 2 | 30363 | Noir | 4× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Gris bleuté clair | 5× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Jaune | 1× |
| Torso Mechanical, Battle Droid | 30375 | Blanc | 4× |
| Arm Mechanical with 2 Clips [Battle Droid] | 30377 | Gris bleuté foncé | 4× |
| Arm Mechanical with 2 Clips [Battle Droid] | 30377 | Noir | 2× |
| Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole [X Opening] | 30389c | Noir | 1× |
| Slope 45? 2 x 2 | 3039 | Blanc | 2× |
| Slope 45° 2 x 2 with Radar Screen Print | 3039pr0005 | Blanc | 1× |
| Slope 45° 2 x 2 with Aircraft Multiple Flight Controls Print | 3039pr0013 | Blanc | 1× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Blanc | 1× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Gris bleuté foncé | 5× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Noir | 4× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Noir | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth | 30553 | Gris bleuté clair | 2× |
| Slope Curved 2 x 2 with Lip, No Studs | 30602 | Trans-bleu clair | 1× |
| Brick Round 1 x 1 Open Stud | 3062b | Blanc | 14× |
| Tile 2 x 2 with Groove | 3068b | Gris bleuté clair | 1× |
| Tile 1 x 2 with Groove | 3069b | Trans-bleu clair | 1× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Noir | 4× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Gris bleuté foncé | 2× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Noir | 2× |
| Technic Brick 1 x 14 [13 Pin Holes] | 32018 | Gris bleuté clair | 2× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Noir | 5× |
| Wedge Plate 4 x 6 Cut Corners | 32059 | Noir | 2× |
| Technic Axle 2 Notched | 32062 | Rouge | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Gris bleuté clair | 6× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Jaune | 2× |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 32124 | Noir | 1× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Noir | 2× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Rouge | 1× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Noir | 1× |
| Technic Beam 1 x 15 Thick | 32278 | Blanc | 2× |
| Technic Brick 4 x 4 with 2 x 2 Opening | 32324 | Gris bleuté clair | 2× |
| Technic Beam 1 x 3 Thick | 32523 | Blanc | 3× |
| Technic Beam 1 x 7 Thick | 32524 | Blanc | 1× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Noir | 8× |
| Technic Brick 6 x 8 with 4 x 6 Opening | 32532 | Gris bleuté clair | 2× |
| Technic Brick 5 x 5 Right Angle (1 x 4 - 1 x 4) | 32555 | Noir | 2× |
| Slope 33° 3 x 2 | 3298 | Gris bleuté clair | 1× |
| Slope 33° 3 x 2 | 3298 | Noir | 2× |
| Plate 1 x 8 | 3460 | Noir | 1× |
| Plate 1 x 8 | 3460 | Gris bleuté foncé | 8× |
| Brick 1 x 3 | 3622 | Noir | 14× |
| Plate 1 x 3 | 3623 | Gris bleuté clair | 4× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Gris bleuté clair | 2× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Noir | 5× |
| Plate 1 x 6 | 3666 | Gris bleuté clair | 4× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Gris bleuté clair | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Jaune | 6× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Blanc | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Gris bleuté foncé | 2× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Noir | 10× |
| Plate 1 x 4 | 3710 | Noir | 10× |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | 3747b | Blanc | 1× |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | 3747b | Gris bleuté foncé | 4× |
| Plate 2 x 6 | 3795 | Gris bleuté clair | 3× |
| Hinge Brick 1 x 4 [Upper] | 3830 | Gris bleuté clair | 10× |
| Hinge Brick 1 x 4 [Lower] | 3831 | Gris bleuté clair | 10× |
| Plate 2 x 10 | 3832 | Noir | 3× |
| Weapon Lance | 3849 | Argent mat | 8× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Noir | 2× |
| Hinge Brick 1 x 2 Base | 3937 | Rouge | 1× |
| Technic Beam 1 x 9 Thick | 40490 | Blanc | 4× |
| Brick Special 1 x 1 with Headlight | 4070 | Gris bleuté foncé | 3× |
| Brick Special 1 x 1 with Headlight | 4070 | Jaune | 4× |
| Seat / Chair 2 x 2 with Center Sprue Mark | 4079b | Blanc | 2× |
| Plate Special 8 x 8 with Grille [Hole in Center] | 4151b | Gris bleuté foncé | 1× |
| Tile 1 x 8 with Groove | 4162 | Noir | 12× |
| Wedge Plate 4 x 2 Right | 41769 | Noir | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Gris bleuté foncé | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Noir | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Gris bleuté foncé | 2× |
| Panel 1 x 4 x 3 [Hollow Studs] | 4215b | Trans-transparent | 1× |
| Brick Special 1 x 14 Grooved | 4217 | Gris bleuté clair | 2× |
| Garage Roller Door Section without Handle | 4218 | Trans-bleu clair | 9× |
| Garage Roller Door Section with Handle | 4219 | Blanc | 1× |
| Technic Pin 1/2 | 4274 | Noir | 11× |
| Plate 2 x 16 | 4282 | Noir | 4× |
| Slope 33° 3 x 1 | 4286 | Noir | 4× |
| Slope Inverted 34° 3 x 1 with Internal Stopper | 4287b | Bleu sable | 2× |
| Slope Inverted 34° 3 x 1 with Internal Stopper | 4287b | Violet foncé | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Noir | 4× |
| Wedge Curved Inverted 6 x 4 | 43713 | Noir | 1× |
| Dish 3 x 3 Inverted [Radar] | 43898 | Blanc | 2× |
| Slope 45° 2 x 8 | 4445 | Noir | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove | 44567a | Jaune | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Gris bleuté foncé | 12× |
| Plate 1 x 10 | 4477 | Noir | 1× |
| Plate Special 1 x 8 with Door Rail | 4510 | Gris bleuté foncé | 6× |
| Technic Axle 3 | 4519 | Gris bleuté clair | 2× |
| Bracket 3 x 2 - 2 x 2 [aka Space Seat] | 4598 | Blanc | 2× |
| Brick Special 1 x 1 Studs on 4 Sides | 4733 | Noir | 2× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Trans-bleu clair | 3× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Gris bleuté foncé | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Gris bleuté foncé | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Gris bleuté clair | 5× |
| Wheel Arch, Curved Wedge 4 x 3 with 2 x 2 Opening and 4 Studs | 47755 | Noir | 1× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Gris bleuté foncé | 2× |
| Panel 1 x 2 x 1 [Square Corners] | 4865a | Gris bleuté foncé | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | 48729b | Noir | 8× |
| Technic Pin Connector Hub Perpendicular 3L with 4 Pins | 48989 | Gris bleuté clair | 2× |
| Plate Special 1 x 1 with Tooth | 49668 | Argent mat | 2× |
| Wheel Arch, Mudguard 4 x 2 1/2 x 2 with 2 x 2 Plate | 50745 | Noir | 2× |
| Wedge Curved 10 x 3 Left | 50955 | Noir | 1× |
| Wedge Curved 10 x 3 Right | 50956 | Noir | 1× |
| Slope Curved 4 x 6 x 2/3 Triple Curved with 4 Studs | 52031 | Noir | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Noir | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Blanc | 1× |
| Wedge Plate 6 x 3 Right | 54383 | Noir | 1× |
| Wedge Plate 6 x 3 Left | 54384 | Noir | 1× |
| Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes | 55981 | Jaune | 1× |
| String Cord Thin (0.5mm) 50cm | 56823c50 | Noir | 1× |
| Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye | 58176 | Trans-orange | 2× |
| Wave / Lightning Angular, Double with Marbled Trans-Purple Pattern | 59233pat0001 | Trans-bleu clair | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Trans-orange | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Trans-bleu foncé | 4× |
| Cone 1 x 1 [Top Groove] | 59900 | Trans-jaune | 4× |
| Bar 7 x 3 with Double Clips (Ladder) [Straight Clips] | 6020 | Noir | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 9 Teeth | 60471 | Noir | 1× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Noir | 2× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Blanc | 1× |
| Slope 18° 4 x 1 | 60477 | Noir | 30× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Jaune | 2× |
| Plate 1 x 12 | 60479 | Gris bleuté clair | 1× |
| Brick Arch 1 x 6 x 3 1/3 Curved Top | 6060 | Noir | 2× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Blanc | 6× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Noir | 4× |
| Wedge Plate 6 x 6 Cut Corner | 6106 | Noir | 2× |
| Technic Pin 1/2 with 2L Bar Extension | 61184 | Gris bleuté clair | 2× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Gris bleuté foncé | 2× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Gris bleuté clair | 1× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Gris bleuté foncé | 8× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-jaune | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-orange | 65× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Argent mat | 18× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-transparent | 7× |
| Equipment Handcuffs | 61482 | Gris bleuté clair | 1× |
| Turntable 4 x 4 Square Base, Locking | 61485 | Blanc | 1× |
| Plate Special 6 x 16 with Studs on 3 Edges | 6205 | Noir | 4× |
| Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole | 6222 | Gris bleuté clair | 1× |
| Brick Special 2 x 2 with Pin and Axle Hole | 6232 | Gris bleuté foncé | 3× |
| Technic Pin Connector Round [Slotted] | 62462 | Gris bleuté clair | 6× |
| Technic Pin Connector Round [Slotted] | 62462 | Argent mat | 1× |
| Brick Special 2 x 4 with Pins | 6249 | Gris bleuté foncé | 1× |
| Leg Skeleton | 6266 | Gris bleuté clair | 16× |
| Tile 1 x 3 | 63864 | Gris bleuté foncé | 3× |
| Tile 1 x 3 | 63864 | Blanc | 1× |
| Bar 6L with Stop Ring | 63965 | Gris bleuté foncé | 2× |
| Windscreen 1 x 6 x 3 | 64453 | Trans-bleu clair | 1× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Blanc | 2× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Noir | 1× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Gris bleuté clair | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Gris bleuté foncé | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Rouge | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | 6558 | Noir | 14× |
| Technic Axle 3 with Stud | 6587 | Beige foncé | 1× |
| Technic Pin with Friction Ridges Lengthwise and Towball | 6628 | Noir | 9× |
| Technic Beam 1 x 3 Thin | 6632 | Gris bleuté clair | 4× |
| Tile 1 x 6 with Groove | 6636 | Gris bleuté foncé | 4× |
| Slope Inverted 45° 4 x 4 Double with 2 Holes | 72454 | Noir | 1× |
| Flexible Hose 8.5L with Tabless Ends (Fixed Ends same color as Tube) | 73590c03a | Noir | 1× |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | 73983 | Gris bleuté foncé | 4× |
| Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | 75937 | Noir | 1× |
| Plate Round 1 x 1 with Open Stud | 85861 | Jaune | 4× |
| Cylinder Half 2 x 4 x 5 with 1 x 2 cutout | 85941 | Trans-bleu clair | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Noir | 2× |
| Tile 2 x 4 with Groove | 87079 | Noir | 4× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Noir | 6× |
| Propeller 7 Blade 6 Diameter | 87751 | Argent mat | 2× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Gris bleuté clair | 6× |
| Brick Arch 1 x 3 x 2 | 88292 | Blanc | 6× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Noir | 4× |
| Plate Special 10 x 10 Octagonal with Hole | 89523 | Gris bleuté clair | 1× |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 90194 | Noir | 1× |
| Plate Special 4 x 6 with Trap Door Hinge [Long Pins] | 92099 | Blanc | 2× |
| Plate Special 1 x 2 [Top Clip] | 92280 | Blanc | 12× |
| Shield Ovoid with Grip [Plain] | 92747 | Trans-bleu clair | 2× |
| Brick Round 2 x 2 [Grill] | 92947 | Blanc | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Noir | 1× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Gris bleuté clair | 2× |
| Weapon Gun / Pistol Two Barrel, 10 Ribs | 95199 | Blanc | 2× |
| Brick and Axle Separator v2.0 | 96874 | Orange | 1× |
| Tile Round 1 x 1 | 98138 | Trans-bleu clair | 8× |
| Tile Round 1 x 1 | 98138 | Trans-rouge | 1× |
| Tile Round 1 x 1 | 98138 | Trans-vert | 2× |
| Spoiler 2 x 4 with Handle [Plain] | 98834 | Noir | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Noir | 12× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris bleuté clair | 13× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Gris bleuté foncé | 13× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Gris bleuté clair | 1× |
ADN du build
Apercu des pieces de Ultra Agents Ocean HQ
Avec 1 204 pieces, ce build est a +191% par rapport au set Agents moyen et a +260% par rapport a la sortie moyenne de 2015.
Par rapport au set Agents moyen
Set Agents moyen : 414 pieces sur 26 autres sets.
Par rapport au set moyen de 2015
Set moyen de 2015 : 334 pieces sur 418 autres sets.
Profil couleur
Couleur dominante
Noir
Pieces uniques
4.8 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Plate Round 1 x 1 with Solid Stud
94xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.



![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6045988.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037746.jpg)







![Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6047276.jpg)