


Recréez les batailles épiques de la saison 3 de NINJAGO® Dragons Rising avec le Jet Mech de Lloyd (71845). Cet ensemble de 1 112 pièces comprend un puissant mech doté de jambes et de bras articulés, d'un cockpit et de 2 grands accessoires d'épée. Transformez le mech en un jet élégant avec un cockpit, des ailes et des réacteurs pour des combats aériens. Rejoignez Lloyd et Sora, armés d'armes ninja, alors qu'ils affrontent les vils Kur, Tyr et un Guerrier Dragonien Spectral. Les méchants arborent une bannière contenant un message secret, révélable par la lame translucide de Lloyd. Sora possède une moto volante, tandis que les ennemis commandent un dragon spectre articulé, combinable avec des éléments du Dragon Chaos Croc-de-Foudre (71832).
Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Sticker Sheet for Set 71845-1 10113526 | Unknown | 1× |
![]() Technic Pin Connector Hub with 2 Perpendicular Axles 10197 | Noir | 3× |
![]() Technic Pin Connector Hub with 2 Perpendicular Axles 10197 | Blanc | 2× |
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Gris bleuté foncé | 4× |
![]() Bar Holder with Clip 11090 | Blanc | 8× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Bleu foncé | 2× |
![]() Tile Special 2 x 2 Inverted 11203 | Noir | 6× |
![]() Tile Special 2 x 2 Inverted 11203 | Jaune clair vif | 8× |
![]() Tile Special 2 x 2 Inverted 11203 | Gris bleuté clair | 4× |
![]() Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle 11214 | Gris bleuté foncé | 2× |
Affichage de 10 sur 360 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Bleu foncé | 2× |
| Tile Special 2 x 2 Inverted | 11203 | Noir | 6× |
| Tile Special 2 x 2 Inverted | 11203 | Jaune clair vif | 8× |
| Tile Special 2 x 2 Inverted | 11203 | Gris bleuté clair | 4× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Gris bleuté foncé | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Noir | 1× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Gris bleuté clair | 1× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Rouge | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Light Aqua | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Corail | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Noir | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Gris bleuté foncé | 3× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Gris bleuté clair | 3× |
| Plate Special 1 x 2 with 5.9mm Towball Socket and Towball | 14419 | Gris bleuté foncé | 1× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Gris bleuté clair | 6× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Or nacré | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Bleu foncé | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Vert foncé | 7× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Gris bleuté clair | 6× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Light Aqua | 1× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Blanc | 6× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Or nacré | 3× |
| Tile Special 1 x 2 with Two Vertical Teeth / Tooth | 15209 | Blanc | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Blanc | 1× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Bleu foncé | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Gris bleuté clair | 8× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Jaune clair vif | 10× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Noir | 1× |
| Plate Round 1 x 2 Half Circle with Stud (Jumper) | 1745 | Blanc | 1× |
| Tile Round 1 x 2 Half Circle | 1748 | Gris bleuté foncé | 1× |
| Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts | 1750 | Gris bleuté foncé | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Noir | 6× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Gris bleuté clair | 1× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Gris bleuté foncé | 4× |
| Technic Panel 5 x 11 x 1 Tapered | 18945 | Vert vif | 2× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Noir | 2× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Argent mat | 1× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Or nacré | 2× |
| Tile Special 2 x 3 Pentagonal | 22385 | Bleu foncé | 4× |
| Tile Special 2 x 3 Pentagonal | 22385 | Gris bleuté clair | 2× |
| Tile Special 2 x 3 Pentagonal | 22385 | Gris bleuté clair | 3× |
| Tile Special 2 x 3 Pentagonal | 22385 | Vert foncé | 8× |
| Tile Special 2 x 3 Pentagonal | 22385 | Or nacré | 4× |
| Plate Special 1 x 2 with End Towball | 22890 | Gris bleuté foncé | 2× |
| Technic Pin Connector Hub Perpendicular 3L with 2 Pins | 2393 | Noir | 2× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Noir | 6× |
| Plate 2 x 2 Corner | 2420 | Noir | 4× |
| Plate 2 x 2 Corner | 2420 | Gris bleuté clair | 2× |
| Plate 2 x 2 Corner | 2420 | Gris bleuté foncé | 4× |
| Slope Curved 2 x 1 Inverted | 24201 | Light Aqua | 2× |
| Tile Round 1 x 1 Half Circle | 24246 | Bleu foncé | 1× |
| Wedge Plate 2 x 2 Left | 24299 | Gris bleuté clair | 1× |
| Wedge Plate 2 x 2 Left | 24299 | Blanc | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Gris bleuté clair | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Blanc | 1× |
| Slope Curved 3 x 2 No Studs | 24309 | Light Aqua | 1× |
| Technic Axle 3 with Stop | 24316 | Marron rougeâtre | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Vert foncé | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Noir | 4× |
| Tile Round 1 x 1 Quarter | 25269 | Jaune clair vif | 6× |
| Tile Round 1 x 1 Quarter | 25269 | Light Aqua | 9× |
| Tile Round 1 x 1 Quarter | 25269 | Gris bleuté clair | 12× |
| Tile Round 1 x 1 Quarter | 25269 | Vert foncé | 2× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Blanc | 4× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Or nacré | 2× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Noir | 4× |
| Plate 4 x 4 Corner | 2639 | Gris bleuté foncé | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Gris bleuté clair | 2× |
| Tile 2 x 3 | 26603 | Rouge | 1× |
| Tile 2 x 3 | 26603 | Gris bleuté foncé | 1× |
| Tile 2 x 3 | 26603 | Gris bleuté clair | 2× |
| Windscreen 6 x 4 x 1 Hexagonal with Handle | 27262 | Vert foncé | 1× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Gris bleuté clair | 4× |
| Technic Axle Towball | 2736 | Gris bleuté clair | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Bleu foncé | 2× |
| Wheel Arch, Mudguard 3 x 4 with 2 x 2 Plate | 28326 | Jaune clair vif | 2× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Noir | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Gris bleuté clair | 7× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Noir | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Gris bleuté clair | 7× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Noir | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Gris bleuté foncé | 6× |
| Plate 2 x 4 | 3020 | Vert foncé | 4× |
| Plate 2 x 4 | 3020 | Light Aqua | 3× |
| Plate 2 x 4 | 3020 | Bleu foncé | 2× |
| Plate 2 x 4 | 3020 | Gris bleuté clair | 4× |
| Plate 2 x 3 | 3021 | Blanc | 2× |
| Plate 2 x 3 | 3021 | Gris bleuté clair | 10× |
| Plate 2 x 3 | 3021 | Beige | 2× |
| Plate 2 x 3 | 3021 | Gris bleuté clair | 1× |
| Plate 2 x 3 | 3021 | Bleu foncé | 2× |
| Plate 2 x 3 | 3021 | Vert foncé | 10× |
| Plate 2 x 3 | 3021 | Noir | 8× |
| Plate 2 x 3 | 3021 | Rouge | 1× |
| Plate 2 x 2 | 3022 | Noir | 2× |
| Plate 2 x 2 | 3022 | Blanc | 1× |
| Plate 2 x 2 | 3022 | Gris bleuté foncé | 1× |
| Plate 2 x 2 | 3022 | Bleu foncé | 2× |
| Plate 2 x 2 | 3022 | Rouge | 2× |
| Plate 2 x 2 | 3022 | Gris bleuté clair | 11× |
| Plate 1 x 2 | 3023 | Trans-rose foncé | 3× |
| Plate 1 x 2 | 3023 | Trans-bleu clair | 3× |
| Plate 1 x 2 | 3023 | Jaune clair vif | 10× |
| Plate 1 x 2 | 3023 | Bleu foncé | 5× |
| Plate 1 x 2 | 3023 | Gris bleuté clair | 10× |
| Plate 1 x 1 | 3024 | Gris bleuté clair | 9× |
| Plate 1 x 1 | 3024 | Noir | 2× |
| Plate 1 x 1 | 3024 | Trans-bleu clair | 1× |
| Plate 4 x 4 | 3031 | Blanc | 1× |
| Plate 2 x 8 | 3034 | Gris bleuté clair | 1× |
| Plate Round Corner 3 x 3 | 30357 | Noir | 4× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Blanc | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Noir | 1× |
| Slope 45? 2 x 2 | 3039 | Gris bleuté foncé | 4× |
| Brick Round 1 x 1 Open Stud | 3062b | Opal Trans-Clear | 1× |
| Tile 1 x 2 with Groove | 3069b | Gris bleuté clair | 7× |
| Tile 1 x 2 with Groove | 3069b | Trans-bleu clair | 2× |
| Tile 1 x 1 with Groove | 3070b | Jaune clair vif | 2× |
| Animal / Creature Body Part, Claw with Clip | 3171 | Or nacré | 6× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Gris bleuté clair | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Blanc | 1× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Blanc | 2× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Noir | 2× |
| Technic Beam 3 x 3 L-Shape Thin | 32056 | Gris bleuté foncé | 4× |
| Technic Axle 2 Notched | 32062 | Rouge | 6× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Gris bleuté foncé | 1× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Beige | 4× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Gris bleuté clair | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Gris bleuté clair | 2× |
| Technic Axle 5 | 32073 | Jaune | 2× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Gris bleuté foncé | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Gris bleuté foncé | 6× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Gris bleuté clair | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Or nacré | 2× |
| Slope 33° 3 x 2 | 3298 | Gris bleuté clair | 2× |
| Slope 33° 3 x 2 | 3298 | Rouge | 1× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Gris bleuté clair | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Gris bleuté clair | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Or nacré | 2× |
| Plate Special 4 x 4 with 3 x 3 Quarter Round Cutout | 35044 | Blanc | 4× |
| Technic Driving Ring Extension, 8 Ridges | 35186 | Gris bleuté clair | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Blanc | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Gris bleuté clair | 5× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Noir | 14× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Jaune clair vif | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Gris bleuté clair | 6× |
| Plate 1 x 3 | 3623 | Gris bleuté clair | 1× |
| Plate 1 x 3 | 3623 | Noir | 2× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Gris bleuté clair | 1× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Gris bleuté clair | 4× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Noir | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Gris bleuté foncé | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Gris bleuté clair | 2× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Gris bleuté clair | 2× |
| Technic Axle 4 | 3705 | Noir | 2× |
| Plate 1 x 4 | 3710 | Noir | 2× |
| Plate 1 x 4 | 3710 | Gris bleuté clair | 2× |
| Plate 1 x 4 | 3710 | Vert foncé | 1× |
| Plate 1 x 4 | 3710 | Bleu foncé | 2× |
| Plate 1 x 4 | 3710 | Jaune clair vif | 2× |
| Technic Bush | 3713 | Gris bleuté clair | 2× |
| Creature Body Part, Dragon Head Upper Jaw, Hollow Eyes, Spikes | 3770 | Blanc | 1× |
| Equipment Lantern | 37776 | Pearl Titanium | 1× |
| Plate 2 x 6 | 3795 | Noir | 5× |
| Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 3839b | Or nacré | 1× |
| Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 3839b | Gris bleuté clair | 1× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Gris bleuté foncé | 4× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Beige | 1× |
| Bracket 2 x 2 - 2 x 2 | 3956 | Noir | 2× |
| Technic Pin Long without Friction Ridges, with Anti-Roll Notch | 39888 | Beige | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Gris bleuté clair | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Beige | 8× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Rouge | 3× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Gris bleuté foncé | 3× |
| Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | 40379 | Blanc | 1× |
| Technic Beam 1 x 2 Thin | 41677 | Blanc | 4× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Noir | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Noir | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Beige foncé | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Rouge | 2× |
| Wedge Plate 4 x 2 Right | 41769 | Vert foncé | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Vert foncé | 2× |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 42003 | Noir | 4× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Noir | 1× |
| Wheel 11 x 8 with Center Groove | 42610 | Gris bleuté clair | 2× |
| Technic Pin 1/2 | 4274 | Gris bleuté clair | 16× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Noir | 8× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Gris bleuté clair | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Gris bleuté clair | 4× |
| Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Top | 43045 | Gris bleuté clair | 4× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Noir | 1× |
| Wedge Curved Inverted 6 x 4 | 43713 | Noir | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Gris bleuté clair | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Gris bleuté clair | 2× |
| Technic Rotation Joint Disk with Pin and 3L Beam Thick | 44225 | Gris bleuté clair | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | 44301b | Noir | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Gris bleuté clair | 3× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Gris bleuté clair | 8× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Gris bleuté foncé | 6× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Gris bleuté clair | 2× |
| Technic Axle 3 | 4519 | Gris bleuté clair | 2× |
| Technic Pin Connector 3L with 2 Pins and Center Hole [Pin Ridges Across Part] | 46189 | Noir | 2× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Noir | 8× |
| Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 47458 | Or nacré | 2× |
| Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 48267 | Or nacré | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Or nacré | 4× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Rouge | 1× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Gris bleuté clair | 2× |
| Slope Inverted 45° 4 x 2 Double | 4871 | Blanc | 1× |
| Tile Special 2 x 2 with Top Pin [Squared Holes] | 49153 | Noir | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Light Aqua | 2× |
| Engine / Air Scoop 2 x 2 | 50943 | Argent mat | 1× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Noir | 1× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | 53451 | Blanc | 18× |
| Weapon Axe Head, Clip-on (Viking) [Thick Clip] | 53454 | Argent mat | 1× |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 53540 | Gris bleuté foncé | 1× |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 53540 | Gris bleuté clair | 2× |
| Technic Ball Joint with Through Axle Hole | 53585 | Noir | 10× |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots] | 53923 | Noir | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Gris bleuté clair | 6× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Noir | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Jaune clair vif | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Light Aqua | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Rouge | 4× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Rouge | 1× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Gris bleuté clair | 2× |
| Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | 57909b | Noir | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Blanc | 4× |
| Cone 1 x 1 [Top Groove] | 59900 | Gris bleuté foncé | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Trans-rose foncé | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Blanc | 7× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Gris bleuté clair | 4× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Noir | 1× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Blanc | 5× |
| Equipment Hose Nozzle / Gun with Side String Hole Simplified | 60849 | Or nacré | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Noir | 28× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Noir | 6× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Jaune | 5× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Gris bleuté foncé | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-bleu clair | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Or nacré | 6× |
| Tile 1 x 3 | 63864 | Gris bleuté clair | 4× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Marron rougeâtre | 2× |
| Bar 6L with Stop Ring | 63965 | Noir | 1× |
| Wedge Curved 4 x 3 No Studs [Plain] | 64225 | Gris bleuté clair | 2× |
| Technic Panel Fairing #13 Large Short Smooth, Side A | 64394 | Vert foncé | 2× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Or nacré | 4× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Noir | 4× |
| Technic Panel Fairing #14 Large Short Smooth, Side B | 64680 | Vert foncé | 2× |
| Large Figure Weapon Sword, Blade with Bar, Single Edge | 65184 | Jaune clair vif | 2× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Or nacré | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Beige | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Rouge | 1× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Noir | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Gris bleuté foncé | 1× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Blanc | 2× |
| Technic Axle 3 with Stud | 6587 | Beige foncé | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Noir | 2× |
| Weapon Hilt Symmetric | 66909 | Gris bleuté foncé | 1× |
| Weapon Hilt Symmetric | 66909 | Vert sable | 1× |
| Slope Curved 4 x 3 with 3 Layers, 1 x 3 Cutout on Underside | 66955 | Vert foncé | 5× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Noir | 10× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Noir | 2× |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 68568 | Noir | 4× |
| Plant / Animal Body Part, Tree / Branch / Tail / Appendage / Tentacle with Pin | 69858 | Light Aqua | 8× |
| Weapon Sword, Broad with Trans-Red Blade pattern | 7182pat0001 | Or nacré | 1× |
| Slope Inverted 45° 4 x 4 Double with 2 Holes | 72454 | Noir | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Gris bleuté clair | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Noir | 9× |
| Technic Beam 1 x 11 Thick with Alternating Holes | 73507 | Noir | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Gris bleuté clair | 2× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Noir | 1× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Gris bleuté clair | 2× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Noir | 1× |
| Plate Special 1 x 1 with Handle on 2 Ends | 78257 | Noir | 1× |
| Bracket 5 x 2 x 1 1/3 with Bottom Stud Holder | 79180 | Noir | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Noir | 4× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Noir | 2× |
| Technic Rotation Joint Disk with Pin and Double Rotation Joint Ball Half | 79505 | Noir | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Bleu foncé | 2× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Vert foncé | 2× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Or nacré | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Blanc | 1× |
| Flag 2 x 2 Trapezoid with Flared Area between Clips | 80324 | Blanc | 2× |
| Rotation Joint Socket with 2 Pins | 80563 | Gris bleuté foncé | 5× |
| Plate Round 1 x 1 with Open Stud | 85861 | Trans-bleu clair | 2× |
| Technic Brick 1 x 2 with Hole and Dual Beam Extensions | 85943 | Gris bleuté foncé | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Light Aqua | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Rouge | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Gris bleuté clair | 7× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Jaune clair vif | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Gris bleuté clair | 4× |
| Tile 2 x 4 with Groove | 87079 | Bleu foncé | 2× |
| Technic Axle 4 with Stop | 87083 | Gris bleuté foncé | 4× |
| Bar 3L | 87994 | Noir | 3× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Marron rougeâtre | 1× |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 90194 | Jaune clair vif | 1× |
| Windscreen 7 x 4 x 2 Round with Handle | 92279 | Trans-transparent | 1× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Pearl Titanium | 1× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Marron rougeâtre | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Bleu foncé | 4× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Gris bleuté clair | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Blanc | 1× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Noir | 4× |
| Brick and Axle Separator v2.0 | 96874 | Orange | 1× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Gris bleuté clair | 4× |
| Tile Round 1 x 1 | 98138 | Gris bleuté clair | 2× |
| Tile Round 1 x 1 | 98138 | Trans-bleu clair | 2× |
| Tile Round 1 x 1 | 98138 | Trans-transparent | 2× |
| Tile Round 1 x 1 | 98138 | Noir | 2× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Blanc | 6× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Pearl Titanium | 2× |
| Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes | 98585 | Gris bleuté clair | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris bleuté clair | 8× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Rouge | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris bleuté clair | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Noir | 3× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Or nacré | 9× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Vert foncé | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Argent mat | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Noir | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Noir | 18× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Bleu foncé | 3× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Gris bleuté clair | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Light Aqua | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Gris bleuté clair | 3× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Jaune clair vif | 4× |
| Torso, Tan Bandages, Olive Green Scaled Chest print, Tan Arms, Olive Green Hands | 973c26h20pr0002 | Orange foncé | 1× |
| Hat, Round, Wide, Flat | 5987 | Marron rougeâtre | 1× |
| Hips and Reddish Brown Legs with Reddish Brown Belt, Dark Orange Robe Ends, Olive Green Skin Through Tears print | 970c19pr0006 | Marron rougeâtre | 1× |
| Minifig Neckwear Armour Shoulder Pads Spiky | 88295 | Marron rougeâtre | 1× |
| Minifig Head Kur, Bandages, Olive Green Face, Yellow Eyes, Crooked White Teeth, Grin, Light Bluish Grey Ponytail | 28621pr9668 | Beige | 1× |
| Hair Swept Back, Tan with Headband Pattern | 69562pat0001 | Vert vif | 1× |
| Hips and Bright Green Legs with Dark Red Sash, Knee Caps, Robe Ends, Dark Green Trim print | 970c06pr0007 | Vert vif | 1× |
| Minifig Neckwear Shoulder Armour With Pearl Gold Dragon pattern | 7104pat0001 | Vert vif | 1× |
| Torso, Ninja Robes, Dark Green Trim, Dark Red Plated Armor, Dark Tan Strap, Gold Dragon print, Bright Green Arms, Black Hands | 973c06h03pr0003 | Vert vif | 1× |
| Minifig Head Lloyd, Reddish Brown Eyebrows, Green Eyes, Lopsided Open Mouth Grin / Gritted Teeth Print | 3626cpr2255 | Jaune | 1× |
| Hair, High Ponytail with Dark Blue Headphones, Cat Ears pattern | 5326pat0001 | Corail | 1× |
| Minifig Neckwear Shoulder Armour With Pearl Gold Dragon pattern | 7104pat0001 | Bleu foncé | 1× |
| Hips and White Legs with Coral Sash, Robe Ends, Gold/Sand Blue Knee Pads print | 970c27pr0032 | Blanc | 1× |
| Torso, Ninja Robes, Dark Blue/Coral Trim, Dark Blue Belt, Gold Cat print, White Arms, Dark Blue Hands | 973c27h05pr0003 | Blanc | 1× |
| Minifig Head Sora, Coral Eyeshadow and Lips, Gold Markings, Golden Eyes / Angry Grin print | 28621pr3985 | Jaune | 1× |
| Minifig Neckwear Armour with Dragon Jaw | 5985 | Bleu foncé | 1× |
| Minifig Head Spectral Dragonian Warrior, Medium Azure Face, Dark Blue Lines, Red Eyes, White Fangs, Red Mouth, Medium Azure/Red Shapes in Back | 28621pr9670 | Light Aqua | 1× |
| Torso, Red Belt, Silver Dragon Skull, Horns print, Trans-Light Blue Arms, Red Hands | 973c65h22pr0001 | Light Aqua | 1× |
| Creature Body Part, Dragon, Head | 5975 | Pearl Titanium | 1× |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | 13564 | Rouge | 2× |
| Lower Body, Ghost with Marbled Light Aqua pattern | 19859pat0016 | Trans-bleu clair | 1× |
| Creature Body Part, Dragon, Tail | 5978 | Bleu foncé | 1× |
| Creature Body Part, Dragon, Wing | 5984 | Bleu foncé | 2× |
| Hips and Trans-Light Blue Legs with Silver Armor, Red Tattered Skirt print | 970c65pr0001 | Argent mat | 1× |
| Minifig Neckwear Armour with Dragon Jaw | 5985 | Pearl Titanium | 1× |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | 13564 | Blanc | 2× |
| Creature Body Part, Dragon, Head | 5975 | Blanc | 1× |
ADN du build
Apercu des pieces de Lloyd’s Jet Mech
Avec 1 112 pieces, ce build est a +143% par rapport au set Ninjago moyen et a +75% par rapport a la sortie moyenne de 2025.
Par rapport au set Ninjago moyen
Set Ninjago moyen : 458 pieces sur 408 autres sets.
Par rapport au set moyen de 2025
Set moyen de 2025 : 636 pieces sur 561 autres sets.
Profil couleur
Couleur dominante
Gris bleuté clair
Pieces uniques
4.7 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Plate 2 x 3
36xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.



![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6047417.jpg)

![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6042956.jpg)



