


Le LEGO DC Batman 76139 1989 Batmobile reproduit le véhicule du film de 1989, construit à partir de 3310 pièces. Ce modèle UCS expose les courbes classiques de la Batmobile, mesurant plus de 60 cm de long. Il présente un cockpit qui s'ouvre en coulissant, complété par un élément de pare-brise enveloppant. Deux mitrailleuses cachées se déploient avec une fonction pop-up en tournant l'échappement de la turbine, accompagnées de grappins sur chaque côté. L'ensemble comprend un support d'affichage rotatif et une plaque d'information. Un support séparé en briques contient les minifigures : Batman, The Joker et Vicki Vale.
Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Gris bleuté foncé | 4× |
![]() Technic Gear 8 Tooth [Reinforced] 10928 | Gris bleuté foncé | 2× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Gris bleuté foncé | 4× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Noir | 8× |
![]() Tile Special 2 x 2 Inverted 11203 | Gris bleuté clair | 2× |
![]() Tile Special 2 x 2 Inverted 11203 | Gris bleuté foncé | 1× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Noir | 8× |
![]() Plate 3 x 3 11212 | Noir | 8× |
![]() Plate 3 x 3 11212 | Gris bleuté clair | 4× |
![]() Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle 11214 | Gris bleuté foncé | 4× |
Affichage de 10 sur 489 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Tile Special 2 x 2 Inverted | 11203 | Gris bleuté foncé | 1× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Noir | 8× |
| Plate 3 x 3 | 11212 | Noir | 8× |
| Plate 3 x 3 | 11212 | Gris bleuté clair | 4× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Gris bleuté foncé | 4× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Noir | 6× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Gris bleuté clair | 11× |
| Sports Roller Skate | 11253 | Argent mat | 12× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Gris bleuté foncé | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Gris bleuté foncé | 4× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Noir | 32× |
| Technic Steering Portal with 2 Pin Holes | 11950 | Gris bleuté clair | 4× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Noir | 14× |
| Brick Arch 1 x 3 x 3 [Gothic] | 13965 | Noir | 4× |
| Brick Arch 1 x 3 x 3 [Gothic] | 13965 | Gris bleuté clair | 4× |
| Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports] | 14395 | Noir | 24× |
| Tile 2 x 2 Corner | 14719 | Gris bleuté foncé | 4× |
| Tile 2 x 2 Corner | 14719 | Noir | 6× |
| Tile Round 2 x 2 with Black Batman Logo print | 14769pr1143 | Noir | 4× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Gris bleuté clair | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Noir | 39× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Gris bleuté foncé | 4× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Noir | 2× |
| Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version] | 15254 | Gris bleuté foncé | 2× |
| Equipment Hand Armor | 15407 | Pearl Titanium | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Gris bleuté foncé | 3× |
| Tile Round 2 x 2 with Hole | 15535 | Gris bleuté clair | 2× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Noir | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Noir | 13× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Gris bleuté foncé | 32× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Noir | 2× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Gris bleuté foncé | 10× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Noir | 4× |
| Tyre 81.6 x 44 R | 18450 | Noir | 2× |
| Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 18575 | Beige | 1× |
| Plate Special 1 x 2 with Handles on Ends | 18649 | Gris bleuté clair | 1× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Noir | 2× |
| Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 18653 | Noir | 10× |
| Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 18653 | Gris bleuté foncé | 4× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Gris bleuté foncé | 4× |
| Bracket 3 x 2 x 1 1/3 with Pin Bottom | 18671 | Gris bleuté foncé | 5× |
| Bracket 3 x 2 x 1 1/3 with Pin Bottom | 18671 | Noir | 8× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Noir | 2× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Rouge | 4× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Gris bleuté clair | 6× |
| Brick Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports | 18838 | Gris bleuté clair | 1× |
| Hinge Panel 3 x 4 x 3 Curved | 18910 | Noir | 4× |
| Technic Turntable Large Type 3 Top, 60 Tooth | 18938 | Noir | 1× |
| Technic Turntable Large Type 3 Base | 18939 | Gris bleuté clair | 1× |
| Technic Driving Ring 3L | 18947 | Gris bleuté foncé | 2× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Noir | 1× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Gris bleuté clair | 2× |
| Wing, Tail 4 x 1 x 3 | 2340 | Noir | 12× |
| Brick 2 x 2 Corner | 2357 | Gris bleuté foncé | 10× |
| Brick 2 x 2 Corner | 2357 | Noir | 14× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Noir | 18× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Argent mat | 6× |
| Plate 2 x 2 Corner | 2420 | Noir | 38× |
| Plate 2 x 2 Corner | 2420 | Gris bleuté foncé | 46× |
| Plate 2 x 2 Corner | 2420 | Marron rougeâtre | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Noir | 4× |
| Slope Curved 2 x 1 Inverted | 24201 | Gris bleuté clair | 6× |
| Wedge Plate 2 x 2 Left | 24299 | Noir | 3× |
| Wedge Plate 2 x 2 Right | 24307 | Noir | 3× |
| Slope Curved 3 x 2 No Studs | 24309 | Gris bleuté clair | 2× |
| Tile 1 x 4 with Groove | 2431 | Gris bleuté foncé | 7× |
| Tile 1 x 4 with Groove | 2431 | Noir | 9× |
| Tile Special 1 x 2 with Handle | 2432 | Gris bleuté foncé | 1× |
| Plate 2 x 12 | 2445 | Gris bleuté foncé | 3× |
| Plate 2 x 12 | 2445 | Gris bleuté clair | 1× |
| Plate 2 x 12 | 2445 | Noir | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Noir | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Citron vert | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Gris bleuté foncé | 5× |
| Brick 2 x 6 | 2456 | Gris bleuté clair | 2× |
| Brick 2 x 6 | 2456 | Noir | 5× |
| Wedge 3 x 3 Facet | 2462 | Gris bleuté foncé | 2× |
| Brick 1 x 16 | 2465 | Azur moyen | 2× |
| Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | 25214 | Pearl Titanium | 6× |
| Tile Round 1 x 1 Quarter | 25269 | Noir | 10× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Gris bleuté clair | 2× |
| Brick Round Corner 4 x 4 Full Brick | 2577 | Noir | 2× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Noir | 3× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Gris bleuté clair | 4× |
| Technic Driving Ring Connector Smooth [4 rounded side walls] | 26287 | Gris bleuté clair | 1× |
| Technic Link 1 x 16 | 2637 | Rouge | 1× |
| Plate 4 x 4 Corner | 2639 | Gris bleuté foncé | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-Brown | 5× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Noir | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Gris bleuté foncé | 8× |
| Tile 2 x 3 | 26603 | Gris bleuté clair | 2× |
| Tile 2 x 3 | 26603 | Noir | 16× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Noir | 2× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Gris bleuté clair | 12× |
| Technic Axle Towball | 2736 | Gris bleuté clair | 4× |
| Tile 4 x 4 Curved, Macaroni | 27507 | Noir | 6× |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | 2780 | Noir | 111× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Gris bleuté foncé | 8× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Noir | 4× |
| Technic Wedge Belt Wheel Tire | 2815 | Noir | 1× |
| Technic Steering Wheel Small (3 Studs Diameter) | 2819 | Noir | 1× |
| Large Figure Armor Plate, Small | 28220 | Pearl Titanium | 8× |
| Wheel Arch, Mudguard 3 x 4 with 2 x 2 Plate | 28326 | Gris bleuté foncé | 4× |
| Technic Engine Connecting Rod | 2852 | Gris bleuté clair | 1× |
| Brick Special 1 x 2 with Grille | 2877 | Noir | 8× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Noir | 5× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Noir | 5× |
| Brick Special 1 x 1 with Handle | 2921 | Noir | 6× |
| Lever Small Base with Black Lever | 298c02 | Noir | 1× |
| Brick Special 2 x 2 with 2 Pins and Axle Hole | 30000 | Noir | 1× |
| Brick 2 x 4 | 3001 | Gris bleuté foncé | 5× |
| Brick 2 x 4 | 3001 | Noir | 4× |
| Brick 2 x 4 | 3001 | Marron rougeâtre | 1× |
| Brick 2 x 3 | 3002 | Noir | 2× |
| Brick 2 x 3 | 3002 | Gris bleuté foncé | 6× |
| Brick 2 x 2 | 3003 | Gris bleuté foncé | 6× |
| Brick 2 x 2 | 3003 | Noir | 4× |
| Brick 1 x 2 | 3004 | Noir | 2× |
| Brick 1 x 2 | 3004 | Gris bleuté foncé | 2× |
| Brick 1 x 2 | 3004 | Noir | 25× |
| Brick 1 x 1 | 3005 | Trans-jaune | 6× |
| Brick 1 x 1 | 3005 | Noir | 20× |
| Brick 2 x 8 | 3007 | Gris bleuté clair | 1× |
| Equipment Camera Handheld with Central Viewfinder | 30089b | Noir | 1× |
| Brick 1 x 6 | 3009 | Noir | 5× |
| Brick 1 x 6 | 3009 | Gris bleuté clair | 2× |
| Brick 1 x 4 | 3010 | Gris bleuté foncé | 2× |
| Brick 1 x 4 | 3010 | Noir | 11× |
| Brick 1 x 4 | 3010 | Bleu moyen | 1× |
| Weapon Gun / Pistol / Revolver Large Barrel, Long Grip | 30132 | Gris bleuté foncé | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Gris bleuté clair | 22× |
| Equipment Binoculars | 30162 | Gris bleuté clair | 2× |
| Tool Grappling Hook | 30192 | Gris bleuté foncé | 2× |
| Plate 2 x 4 | 3020 | Jaune | 12× |
| Plate 2 x 4 | 3020 | Gris bleuté clair | 4× |
| Plate 2 x 4 | 3020 | Gris bleuté foncé | 2× |
| Plate 2 x 4 | 3020 | Noir | 27× |
| Plate 2 x 4 | 3020 | Marron rougeâtre | 15× |
| Plate 2 x 3 | 3021 | Gris bleuté foncé | 10× |
| Plate 2 x 3 | 3021 | Blanc | 6× |
| Plate 2 x 3 | 3021 | Gris bleuté clair | 6× |
| Plate 2 x 3 | 3021 | Noir | 45× |
| Plate 2 x 2 | 3022 | Noir | 31× |
| Plate 2 x 2 | 3022 | Gris bleuté foncé | 8× |
| Plate 2 x 2 | 3022 | Beige | 21× |
| Plate 2 x 2 | 3022 | Beige foncé | 2× |
| Plate 1 x 2 | 3023 | Gris bleuté foncé | 21× |
| Plate 1 x 2 | 3023 | Beige | 77× |
| Plate 1 x 2 | 3023 | Noir | 69× |
| Plate 1 x 1 | 3024 | Trans-jaune | 6× |
| Plate 1 x 1 | 3024 | Noir | 54× |
| Plate 1 x 1 | 3024 | Beige | 6× |
| Plate 1 x 1 | 3024 | Gris bleuté clair | 4× |
| Plate 1 x 1 | 3024 | Gris bleuté foncé | 4× |
| Road Sign Clip-on 2.2 x 2.667 Triangular | 30259 | Gris bleuté clair | 4× |
| Plate 4 x 4 | 3031 | Noir | 14× |
| Plate 4 x 4 | 3031 | Marron rougeâtre | 4× |
| Plate 4 x 6 | 3032 | Noir | 6× |
| Plate 4 x 6 | 3032 | Beige | 2× |
| Plate 6 x 10 | 3033 | Gris bleuté foncé | 1× |
| Plate 2 x 8 | 3034 | Gris bleuté clair | 1× |
| Plate 2 x 8 | 3034 | Beige | 2× |
| Plate 2 x 8 | 3034 | Gris bleuté foncé | 4× |
| Plate 2 x 8 | 3034 | Noir | 4× |
| Plate Round Corner 3 x 3 | 30357 | Noir | 2× |
| Plate 6 x 8 | 3036 | Gris bleuté foncé | 1× |
| Slope 18° 4 x 2 | 30363 | Noir | 2× |
| Brick Round 2 x 2 Dome Top, Hollow Stud | 30367c | Noir | 1× |
| Slope 45° 2 x 4 | 3037 | Noir | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Noir | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Marron rougeâtre | 2× |
| Arm Mechanical with 2 Clips [Battle Droid] | 30377 | Gris bleuté foncé | 1× |
| Slope 45? 2 x 2 | 3039 | Noir | 12× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Marron rougeâtre | 2× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Noir | 14× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Noir | 12× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Gris bleuté clair | 4× |
| Slope 45° 2 x 2 Double Convex | 3045 | Noir | 4× |
| Slope 45° 2 x 1 Double / Inverted with Bottom Stud Holder | 3049d | Noir | 2× |
| Brick Special 1 x 2 with 2 Pins, Round Pin Holes | 30526 | Gris bleuté clair | 2× |
| Plate Round Corner 4 x 4 | 30565 | Noir | 10× |
| Plate Round Corner 4 x 4 | 30565 | Gris bleuté foncé | 4× |
| Plate Special 2 x 8 with Door Rail | 30586 | Gris bleuté clair | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Jaune | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Gris bleuté foncé | 8× |
| Tile 2 x 2 with Groove | 3068b | Noir | 27× |
| Tile 2 x 2 with Light Bluish Gray Fuel Cap print | 3068bpr0408 | Noir | 2× |
| Tile 1 x 2 with Groove | 3069b | Noir | 37× |
| Tile 1 x 2 with Groove | 3069b | Gris bleuté clair | 4× |
| Tile 1 x 2 with Groove | 3069b | Gris bleuté foncé | 4× |
| Tile 1 x 1 with Groove | 3070b | Noir | 16× |
| Tile 1 x 1 with Groove | 3070b | Gris bleuté clair | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Beige | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gris bleuté clair | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gris bleuté foncé | 2× |
| Technic Plate 2 x 6 [5 Holes] | 32001 | Gris bleuté clair | 1× |
| Technic Pin 3/4 | 32002 | Gris bleuté foncé | 12× |
| Technic Link 1 x 6 without Stoppers | 32005a | Noir | 1× |
| Technic Beam 1 x 5 Thin | 32017 | Jaune | 12× |
| Technic Brick 1 x 14 [13 Pin Holes] | 32018 | Noir | 9× |
| Plate Special 1 x 2 with Door Rail | 32028 | Noir | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Jaune | 2× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Noir | 2× |
| Technic Axle Connector with Axle Hole | 32039 | Noir | 5× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Rouge | 10× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Noir | 4× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Gris bleuté clair | 4× |
| Technic Beam 3 x 3 L-Shape Thin | 32056 | Jaune | 2× |
| Technic Axle 2 Notched | 32062 | Noir | 1× |
| Technic Axle 2 Notched | 32062 | Rouge | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Beige | 6× |
| Technic Axle 5 | 32073 | Gris bleuté clair | 5× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Gris bleuté clair | 3× |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 32124 | Noir | 6× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Gris bleuté foncé | 2× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Gris bleuté clair | 3× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Noir | 1× |
| Technic Brick 4 x 4 with 2 x 2 Opening | 32324 | Gris bleuté clair | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Noir | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Gris bleuté foncé | 2× |
| Technic Steering / CV Joint | 32494 | Gris bleuté clair | 1× |
| Technic Beam 1 x 3 Thick | 32523 | Orange clair vif | 2× |
| Technic Beam 1 x 7 Thick | 32524 | Bleu sable | 15× |
| Technic Pin Connector Plate with One Hole (Single on Bottom) | 32529 | Noir | 4× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Rouge | 1× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Gris bleuté clair | 14× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Azur foncé | 2× |
| Technic Brick 5 x 5 Right Angle (1 x 4 - 1 x 4) | 32555 | Noir | 4× |
| Technic Pin Long without Friction Ridges | 32556 | Beige | 6× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Noir | 8× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Gris bleuté clair | 8× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Noir | 1× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Gris bleuté foncé | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Noir | 8× |
| Slope 33° 3 x 2 | 3298 | Noir | 7× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Noir | 23× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Gris bleuté clair | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Noir | 24× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Gris bleuté clair | 4× |
| Plate 1 x 8 | 3460 | Noir | 6× |
| Plate 1 x 8 | 3460 | Gris bleuté foncé | 5× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Noir | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Noir | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Noir | 6× |
| Brick 1 x 3 | 3622 | Gris bleuté clair | 2× |
| Brick 1 x 3 | 3622 | Noir | 8× |
| Brick 1 x 3 | 3622 | Gris bleuté foncé | 2× |
| Plate 1 x 3 | 3623 | Beige foncé | 4× |
| Plate 1 x 3 | 3623 | Gris bleuté foncé | 14× |
| Plate 1 x 3 | 3623 | Marron rougeâtre | 2× |
| Plate 1 x 3 | 3623 | Noir | 42× |
| Plate 1 x 3 | 3623 | Rouge | 1× |
| Minifig Head [Plain] [Hollow Stud] | 3626c | Argent mat | 4× |
| Brick Arch 1 x 4 | 3659 | Beige | 5× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Noir | 4× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Gris bleuté clair | 2× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Beige | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Gris bleuté clair | 4× |
| Slope Inverted 45° 2 x 1 | 3665 | Noir | 2× |
| Plate 1 x 6 | 3666 | Noir | 2× |
| Plate 1 x 6 | 3666 | Gris bleuté clair | 8× |
| Plate 1 x 6 | 3666 | Noir | 27× |
| Plate 1 x 6 | 3666 | Gris bleuté foncé | 2× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Gris bleuté clair | 2× |
| Slope 33° 3 x 3 Double Convex | 3675 | Noir | 4× |
| Slope 65° 2 x 2 x 2 with Bottom Tube | 3678b | Gris bleuté clair | 2× |
| Slope 65° 2 x 2 x 2 with Bottom Tube | 3678b | Noir | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Noir | 8× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Gris bleuté foncé | 6× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Gris bleuté clair | 6× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Marron rougeâtre | 9× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Gris bleuté foncé | 16× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Gris bleuté clair | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Noir | 1× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Gris bleuté foncé | 10× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Blanc | 5× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Gris bleuté clair | 4× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Gris bleuté foncé | 2× |
| Technic Axle 4 | 3705 | Noir | 1× |
| Technic Axle 4 | 3705 | Rouge | 2× |
| Technic Axle 6 | 3706 | Noir | 2× |
| Technic Axle 6 | 3706 | Rouge | 2× |
| Technic Axle 12 | 3708 | Noir | 2× |
| Plate 1 x 4 | 3710 | Gris bleuté foncé | 10× |
| Plate 1 x 4 | 3710 | Gris bleuté clair | 8× |
| Plate 1 x 4 | 3710 | Noir | 46× |
| Plate 1 x 4 | 3710 | Citron vert | 20× |
| Technic Axle 10 | 3737 | Noir | 3× |
| Technic Gear Rack 1 x 4 | 3743 | Gris bleuté clair | 2× |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | 3747b | Beige | 1× |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | 3747b | Gris bleuté clair | 2× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Beige | 1× |
| Plate 2 x 6 | 3795 | Gris bleuté foncé | 12× |
| Plate 2 x 6 | 3795 | Noir | 10× |
| Plate 2 x 6 | 3795 | Gris bleuté clair | 2× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Jaune | 4× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Gris bleuté foncé | 12× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Noir | 2× |
| Hinge Brick 1 x 2 Base | 3937 | Jaune | 4× |
| Hinge Brick 1 x 2 Base | 3937 | Noir | 2× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Gris bleuté foncé | 2× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Noir | 1× |
| Cone 4 x 4 x 2, Axle Hole [Plain] | 3943b | Gris bleuté foncé | 1× |
| Bracket 2 x 2 - 2 x 2 | 3956 | Gris bleuté clair | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Gris bleuté foncé | 4× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Noir | 3× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Rouge | 1× |
| Technic Beam 1 x 9 Thick | 40490 | Rouge | 1× |
| Brick Special 1 x 1 with Headlight | 4070 | Gris bleuté foncé | 2× |
| Brick Special 1 x 1 with Headlight | 4070 | Noir | 14× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Noir | 2× |
| Technic Beam 1 x 13 Thick | 41239 | Gris bleuté clair | 1× |
| Slope 33° 3 x 3 | 4161 | Noir | 4× |
| Tile 1 x 8 with Groove | 4162 | Gris bleuté foncé | 1× |
| Tile 1 x 8 with Groove | 4162 | Noir | 16× |
| Tile 1 x 8 with Groove | 4162 | Beige | 1× |
| Technic Beam 1 x 2 Thin | 41677 | Noir | 1× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Gris bleuté foncé | 2× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Gris bleuté clair | 4× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Beige foncé | 2× |
| Wedge Curved 8 x 3 x 2 Open Right | 41749 | Noir | 3× |
| Wedge Curved 8 x 3 x 2 Open Left | 41750 | Noir | 3× |
| Wedge Plate 4 x 2 Right | 41769 | Noir | 5× |
| Wedge Plate 4 x 2 Right | 41769 | Gris bleuté foncé | 5× |
| Wedge Plate 4 x 2 Left | 41770 | Gris bleuté foncé | 5× |
| Wedge Plate 4 x 2 Left | 41770 | Noir | 5× |
| Technic Wedge Belt Wheel [aka Pulley] | 4185 | Noir | 1× |
| Brick Special 1 x 2 with Groove | 4216 | Noir | 2× |
| Technic Pin 1/2 | 4274 | Gris bleuté clair | 2× |
| Technic Pin 1/2 | 4274 | Noir | 2× |
| Plate 2 x 16 | 4282 | Gris bleuté foncé | 2× |
| Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection | 4287c | Noir | 2× |
| Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Top | 43045 | Gris bleuté clair | 1× |
| Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Bottom | 43056 | Gris bleuté clair | 1× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Noir | 21× |
| Wedge Plate 4 x 4 with 2 x 2 Cutout | 43719 | Noir | 2× |
| Wedge Sloped 45° 4 x 2 Right | 43720 | Noir | 1× |
| Wedge Sloped 45° 4 x 2 Left | 43721 | Noir | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Noir | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Noir | 2× |
| Dish 3 x 3 Inverted [Radar] | 43898 | Noir | 4× |
| Brick Curved 6 x 2 | 44126 | Noir | 2× |
| Weapon Gun / Blaster with Studs on Side | 44709 | Noir | 1× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Beige | 8× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Gris bleuté foncé | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Noir | 8× |
| Support 2 x 4 x 5 Stanchion Inclined [5mm wide posts] | 4476b | Pearl Titanium | 2× |
| Plate 1 x 10 | 4477 | Gris bleuté foncé | 2× |
| Plate 1 x 10 | 4477 | Noir | 5× |
| Brick Special 1 x 2 with Pin - Bottom Stud Holder | 44865 | Gris bleuté foncé | 7× |
| Brick Arch 1 x 3 | 4490 | Gris bleuté foncé | 4× |
| Technic Axle 3 | 4519 | Gris bleuté clair | 1× |
| Windscreen 8 x 4 x 2 Curved [2 Dual-Fingered Click Hinges] | 46413 | Noir | 1× |
| Brick Special 1 x 1 Studs on 4 Sides | 4733 | Gris bleuté clair | 2× |
| Wedge Plate 12 x 3 Left | 47397 | Noir | 3× |
| Wedge Plate 12 x 3 Right | 47398 | Noir | 3× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Trans-rouge | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Noir | 13× |
| Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs | 48092 | Noir | 8× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Noir | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Gris bleuté clair | 4× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | 48729b | Noir | 2× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Noir | 2× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Gris bleuté clair | 4× |
| Technic Axle 16 | 50451 | Noir | 3× |
| Engine / Air Scoop 2 x 2 | 50943 | Pearl Titanium | 2× |
| Slope Curved 3 x 1 No Studs | 50950 | Noir | 2× |
| Slope Curved 3 x 1 No Studs | 50950 | Beige | 2× |
| Wedge Plate 2 x 4 | 51739 | Noir | 6× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Noir | 6× |
| Tyre 68.7 x 27 S | 52985 | Noir | 2× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | 53451 | Argent mat | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Noir | 26× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Gris bleuté foncé | 8× |
| Windscreen 12 x 12 x 2 Curved with Black print | 56074pr0001 | Trans-Brown | 1× |
| Wheel 43.2 x 26 Technic Racing Small with 6 Pinholes | 56908 | Noir | 5× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Gris bleuté clair | 4× |
| Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout | 58846 | Gris bleuté clair | 4× |
| Arm Mechanical Straight (Droid) [2 Clips at 90°] | 59230 | Noir | 2× |
| Technic Axle 5.5 with Stop [Rounded Short End] | 59426 | Gris bleuté foncé | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Jaune | 5× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Noir | 2× |
| Plate Round Corner 6 x 6 | 6003 | Noir | 4× |
| Brick Arch 1 x 3 x 2 Curved Top | 6005 | Noir | 4× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Noir | 10× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Azur moyen | 2× |
| Slope 18° 4 x 1 | 60477 | Noir | 4× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Gris bleuté clair | 5× |
| Plate 1 x 12 | 60479 | Gris bleuté foncé | 4× |
| Plate 1 x 12 | 60479 | Noir | 7× |
| Slope 65° 2 x 1 x 2 | 60481 | Gris bleuté clair | 2× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Gris bleuté clair | 1× |
| Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 60581 | Gris bleuté foncé | 2× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Noir | 12× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Jaune | 1× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Gris bleuté clair | 8× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Noir | 14× |
| Brick 1 x 10 | 6111 | Gris bleuté foncé | 2× |
| Brick 1 x 10 | 6111 | Gris bleuté clair | 1× |
| Brick 1 x 12 | 6112 | Noir | 3× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Noir | 2× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Gris bleuté clair | 4× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Noir | 2× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Noir | 20× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Pearl Titanium | 18× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Noir | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-transparent | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Jaune | 32× |
| Plate Special 4 x 6 with Studs on 3 Edges | 6180 | Noir | 1× |
| Plate Special 4 x 6 with Studs on 3 Edges | 6180 | Gris bleuté foncé | 2× |
| Panel 1 x 1 x 1 Corner | 6231 | Gris bleuté clair | 2× |
| Brick Special 2 x 2 with Pin and Axle Hole | 6232 | Gris bleuté foncé | 10× |
| Technic Pin Connector Round [Slotted] | 62462 | Noir | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Pearl Titanium | 10× |
| Tile 1 x 3 | 63864 | Noir | 15× |
| Tile 1 x 3 | 63864 | Gris bleuté clair | 2× |
| Tile 1 x 3 | 63864 | Gris bleuté foncé | 2× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Gris bleuté foncé | 8× |
| Sticker Sheet for Set 76139-1 | 65323 | Unknown | 1× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Jaune | 1× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Gris bleuté foncé | 6× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Gris bleuté foncé | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | 6558 | Noir | 65× |
| Gearbox 4 x 4 x 1 2/3 with 1 x 2 Cutouts, Pin Holes | 6585 | Noir | 1× |
| Technic Axle 3 with Stud | 6587 | Beige foncé | 6× |
| Technic Gear 12 Tooth Bevel | 6589 | Beige | 2× |
| Technic Beam 1 x 3 Thin | 6632 | Blanc | 1× |
| Technic Beam 1 x 3 Thin | 6632 | Gris bleuté clair | 8× |
| Technic Beam 1 x 3 Thin | 6632 | Jaune | 4× |
| Tile 1 x 6 with Groove | 6636 | Gris bleuté clair | 4× |
| Tile 1 x 6 with Groove | 6636 | Noir | 9× |
| Tile 2 x 6 | 69729 | Noir | 3× |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | 73983 | Noir | 4× |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | 73983 | Gris bleuté foncé | 7× |
| Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | 75937 | Pearl Titanium | 1× |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 85080 | Noir | 2× |
| Train Wheel RC Train, Spoked with Technic Axle Hole and Counterweight, 37 mm diameter [Flanged Driver] | 85557 | Noir | 2× |
| Train Wheel RC Train, Spoked with Technic Axle Hole and Counterweight, 30 mm diameter [Blind Driver] | 85558 | Noir | 1× |
| Plate Round 1 x 1 with Open Stud | 85861 | Gris bleuté clair | 26× |
| Technic Brick 1 x 2 with Hole and Dual Beam Extensions | 85943 | Gris bleuté foncé | 12× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Noir | 41× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Marron rougeâtre | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Gris bleuté foncé | 19× |
| Tile 2 x 4 with Groove | 87079 | Noir | 20× |
| Tile 2 x 4 with Groove | 87079 | Gris bleuté foncé | 10× |
| Tile 2 x 4 with Groove | 87079 | Gris bleuté clair | 4× |
| Technic Axle 4 with Stop | 87083 | Gris bleuté foncé | 4× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Beige | 4× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Noir | 6× |
| Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 87544 | Gris bleuté clair | 2× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Noir | 2× |
| Wedge 2 x 2 Facet | 87620 | Gris bleuté clair | 2× |
| Bar 3L | 87994 | Gris bleuté clair | 7× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Gris bleuté clair | 4× |
| Tile 8 x 16 with Bottom Tubes | 90498 | Noir | 1× |
| Plate 2 x 14 | 91988 | Gris bleuté foncé | 2× |
| Plate Special 1 x 2 [Top Clip] | 92280 | Noir | 8× |
| Plate Special 1 x 2 [Top Clip] | 92280 | Gris bleuté clair | 2× |
| Hinge Plate 2 x 2 Locking with 1 Finger on Top | 92582 | Gris bleuté clair | 2× |
| Plate Special 1 x 4 with 2 Studs | 92593 | Gris bleuté clair | 4× |
| Technic Steering / CV Joint Axle | 92906 | Gris bleuté foncé | 1× |
| Technic Steering Hub for Portal Axle | 92909 | Gris bleuté foncé | 4× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Noir | 4× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Gris bleuté foncé | 2× |
| Slope Curved 4 x 2 No Studs | 93606 | Noir | 44× |
| Slope Curved 4 x 2 No Studs | 93606 | Rouge foncé | 2× |
| Slope Curved 4 x 2 No Studs | 93606 | Gris bleuté foncé | 1× |
| Brick and Axle Separator v2.0 | 96874 | Rouge | 1× |
| Tile Round 1 x 1 | 98138 | Trans-rouge | 2× |
| Tile Round 1 x 1 | 98138 | Noir | 4× |
| Tile Round 1 x 1 with Dark Bluish Grey Batman Logo, 6 Reddish Brown Rivets print | 98138pr0125 | Gris bleuté clair | 1× |
| Brick Special 1 x 2 with Masonry Brick Profile | 98283 | Gris bleuté clair | 3× |
| Slope 75° 2 x 2 x 3 [Solid Studs] | 98560 | Gris bleuté foncé | 2× |
| Weapon Batarang | 98721 | Noir | 1× |
| Spoiler 2 x 4 with Handle [Plain] | 98834 | Noir | 10× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Gris bleuté clair | 39× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Noir | 24× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris bleuté clair | 8× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Noir | 36× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Pearl Titanium | 2× |
| Technic Beam Triangle Thin [Type II] | 99773 | Gris bleuté foncé | 4× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Gris bleuté foncé | 4× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Blanc | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Noir | 4× |
ADN du build
Apercu des pieces de 1989 Batmobile
Avec 3 310 pieces, ce build est a +382% par rapport au set Batman moyen et a +713% par rapport a la sortie moyenne de 2019.
Par rapport au set Batman moyen
Set Batman moyen : 687 pieces sur 40 autres sets.
Par rapport au set moyen de 2019
Set moyen de 2019 : 407 pieces sur 448 autres sets.
Profil couleur
Couleur dominante
Noir
Pieces uniques
10 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Plate 1 x 2
167xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.
![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6047417.jpg)
![Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6042955.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037746.jpg)





