


Il monumentale set LEGO Icons Titanic (10294) salpa come tributo a una delle navi più famose della storia. Questo modello da 9092 pezzi, in scala 1:200, ricrea meticolosamente il transatlantico del suo fatale viaggio inaugurale con dettagli sorprendenti, estendendosi per una lunghezza impressionante di 135 cm. Il design si divide in tre sezioni distinte, consentendo un'autentica vista in sezione trasversale. I costruttori scoprono intricati spazi interni, inclusa l'elegante sala da pranzo di prima classe, le iconiche grandi scalinate, una dettagliata sala caldaie e numerose cabine delle diverse classi passeggeri. Caratteristiche esterne come il ponte di comando, il ponte passeggiata, una sala lettura e la piscina sono anch'esse fedelmente rappresentate, dando vita al leggendario passato del vascello. Questo gigantesco progetto di costruzione culmina in un formidabile pezzo da esposizione, che celebra la duratura leggenda della nave.
Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Brick Curved 1 x 4 x 1 1/3 No Studs 10314 | Rosso scuro | 32× |
![]() Technic Gear 8 Tooth [Reinforced] 10928 | Grigio bluastro scuro | 3× |
![]() Bar Holder with Clip 11090 | Nero | 2× |
![]() Bar Holder with Clip 11090 | Bianco | 11× |
![]() Bar Holder with Clip 11090 | Grigio bluastro scuro | 1× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Rosso scuro | 4× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Nero | 2× |
![]() Tile Special 2 x 2 Inverted 11203 | Rosso scuro | 2× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Rosso | 4× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Bianco | 4× |
Visualizzati 10 di 692 pezzi
🔓 Registrati per vedere tutti i pezzi| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Rosso scuro | 4× |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Nero | 2× |
| Tile Special 2 x 2 Inverted | 11203 | Rosso scuro | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Rosso | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Bianco | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Nero | 16× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Beige | 2× |
| Plate 3 x 3 | 11212 | Beige | 2× |
| Plate 3 x 3 | 11212 | Bianco | 19× |
| Plate Round 6 x 6 with Hole | 11213 | Grigio bluastro chiaro | 4× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Nougat medio | 5× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Rosso | 8× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Nero | 24× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Nero | 2× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Rosso scuro | 6× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Nero | 6× |
| String with End Studs 31L Overall | 14226c31 | Nero | 13× |
| String with End Studs 41L Overall | 14226c41 | Nero | 4× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Grigio bluastro scuro | 7× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Grigio bluastro chiaro | 9× |
| Panel 1 x 4 x 2 with Side Supports - Hollow Studs | 14718 | Beige | 2× |
| Tile 2 x 2 Corner | 14719 | Blu scuro | 6× |
| Tile 2 x 2 Corner | 14719 | Bianco | 1× |
| Tile 2 x 2 Corner | 14719 | Beige | 47× |
| Tile Round 2 x 2 with Bottom Stud Holder with 'T' on Black Background Print | 14769pr1194 | Grigio bluastro chiaro | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder with 'I' on Black Background Print | 14769pr1197 | Grigio bluastro chiaro | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder with 'A' on Black Background Print | 14769pr1200 | Grigio bluastro chiaro | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder with 'C' on Black Background Print | 14769pr1211 | Grigio bluastro chiaro | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder with 'N' on Black Background Print | 14769pr1214 | Grigio bluastro chiaro | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Nero | 2× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Bianco | 24× |
| Tile Round 2 x 2 with Hole | 15535 | Bianco | 8× |
| Tile Round 2 x 2 with Hole | 15535 | Nero | 7× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Rosso scuro | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Beige scuro | 12× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Beige | 41× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Bianco | 7× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 31× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Grigio bluastro scuro | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Verde scuro | 20× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Nero | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Rosso scuro | 1× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Grigio bluastro chiaro | 16× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Beige | 83× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Bianco | 44× |
| Brick Round 2 x 2, Pin Holes | 17485 | Beige | 4× |
| Brick Round 2 x 2, Pin Holes | 17485 | Grigio bluastro chiaro | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Nero | 3× |
| Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 18653 | Marrone rossastro | 24× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Marrone rossastro | 1× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Bianco | 6× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Nero | 4× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Rosso | 2× |
| Plate Round Corners 2 x 6 Double | 18980 | Grigio bluastro chiaro | 8× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Arancione chiaro brillante | 8× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Grigio bluastro chiaro | 23× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Bianco | 32× |
| Tile Special 2 x 3 Pentagonal with TC Initials print | 22385pr2004 | Grigio bluastro chiaro | 1× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Beige | 2× |
| Plate Round Half 4 x 8 | 22888 | Grigio bluastro scuro | 2× |
| Slope Inverted 45° 6 x 2 Double with 2 x 4 Cutout | 22889 | Bianco | 2× |
| Slope Inverted 45° 6 x 2 Double with 2 x 4 Cutout | 22889 | Grigio bluastro chiaro | 4× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Grigio bluastro scuro | 8× |
| Bar Holder with Hole and Bar Handle | 23443 | Bianco | 13× |
| Brick 2 x 2 Corner | 2357 | Bianco | 1× |
| Brick 2 x 2 Corner | 2357 | Rosso | 2× |
| Panel 1 x 3 x 1 | 23950 | Bianco | 3× |
| Panel 1 x 2 x 1 with Rounded Corners and 2 Sides | 23969 | Bianco | 4× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Grigio bluastro scuro | 42× |
| Plate 2 x 2 Corner | 2420 | Giallo | 4× |
| Plate 2 x 2 Corner | 2420 | Beige | 18× |
| Plate 2 x 2 Corner | 2420 | Nero | 10× |
| Plate 2 x 2 Corner | 2420 | Bianco | 19× |
| Slope Curved 2 x 1 Inverted | 24201 | Rosso scuro | 1× |
| Tile Round 1 x 1 Half Circle | 24246 | Beige | 4× |
| Wedge Plate 2 x 2 Left | 24299 | Nero | 3× |
| Wedge Plate 2 x 2 Right | 24307 | Nero | 3× |
| Tile 1 x 4 with Groove | 2431 | Rosso scuro | 12× |
| Tile 1 x 4 with Groove | 2431 | Nero | 14× |
| Tile 1 x 4 with Groove | 2431 | Beige | 12× |
| Tile 1 x 4 with Groove | 2431 | Bianco | 14× |
| Tile Special 1 x 2 with Handle | 2432 | Nero | 12× |
| Plate 2 x 12 | 2445 | Grigio bluastro scuro | 4× |
| Plate 2 x 12 | 2445 | Grigio bluastro chiaro | 3× |
| Plate 2 x 12 | 2445 | Bianco | 6× |
| Plate 2 x 12 | 2445 | Nero | 21× |
| Plate 2 x 12 | 2445 | Beige | 6× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Grigio bluastro chiaro | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Beige | 2× |
| Brick 1 x 2 x 5 with Hollow Studs | 2454b | Grigio bluastro chiaro | 8× |
| Brick 2 x 6 | 2456 | Beige | 5× |
| Brick 2 x 6 | 2456 | Nero | 1× |
| Brick 2 x 6 | 2456 | Nero | 6× |
| Brick 2 x 6 | 2456 | Grigio bluastro chiaro | 13× |
| Brick 2 x 6 | 2456 | Marrone rossastro | 1× |
| Brick 1 x 16 | 2465 | Bianco | 6× |
| Barrel 2 x 2 x 2 | 2489 | Grigio bluastro scuro | 8× |
| Tile Round 1 x 1 Quarter | 25269 | Rosso scuro | 20× |
| Tile Round 1 x 1 Quarter | 25269 | Marrone rossastro | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Bianco | 10× |
| Tile Round 1 x 1 Quarter | 25269 | Blu scuro | 2× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Grigio bluastro chiaro | 4× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Nero | 2× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Nero | 11× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Bianco | 2× |
| Plate 4 x 4 Corner | 2639 | Bianco | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Grigio bluastro scuro | 8× |
| Tile 2 x 3 | 26603 | Bianco | 20× |
| Tile 2 x 3 | 26603 | Nero | 12× |
| Tile 2 x 3 | 26603 | Beige scuro | 4× |
| Tile 2 x 3 | 26603 | Rosso scuro | 26× |
| Tile 2 x 3 | 26603 | Beige | 9× |
| Tile 2 x 3 with Yellow 'TITANIC' print | 26603pr0060 | Nero | 2× |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 26604 | Bianco | 2× |
| Technic Disc 3 x 3 | 2723 | Grigio bluastro chiaro | 4× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Rosso scuro | 2× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Beige | 16× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Grigio bluastro chiaro | 2× |
| Technic Axle Towball | 2736 | Grigio bluastro chiaro | 8× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Grigio bluastro scuro | 1× |
| Plate Special 2 x 2 with 2 Pin Holes | 2817 | Rosso | 4× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Nero | 6× |
| Technic Engine Piston Round | 2851 | Giallo | 8× |
| Technic Engine Crankshaft | 2853 | Grigio bluastro chiaro | 8× |
| Technic Engine Crankshaft Center | 2854 | Beige | 4× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Beige | 2× |
| Minifig Neckwear Bracket [One Stud] - Reinforced | 28974 | Nero | 284× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Bianco | 32× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Nero | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Bianco | 32× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Nero | 1× |
| Brick 2 x 4 | 3001 | Grigio bluastro chiaro | 8× |
| Brick 2 x 4 | 3001 | Rosso | 40× |
| Brick 2 x 4 | 3001 | Bianco | 2× |
| Brick 2 x 4 | 3001 | Nero | 6× |
| Brick 2 x 3 | 3002 | Giallo | 2× |
| Brick 2 x 3 | 3002 | Bianco | 30× |
| Brick 2 x 3 | 3002 | Grigio bluastro chiaro | 1× |
| Brick 2 x 3 | 3002 | Nero | 2× |
| Brick 2 x 2 | 3003 | Bianco | 5× |
| Brick 2 x 2 | 3003 | Marrone rossastro | 30× |
| Brick 2 x 2 | 3003 | Rosso | 3× |
| Brick 1 x 2 | 3004 | Rosso scuro | 3× |
| Brick 1 x 2 | 3004 | Bianco | 23× |
| Brick 1 x 2 | 3004 | Beige | 6× |
| Brick 1 x 1 | 3005 | Beige | 2× |
| Brick 1 x 1 | 3005 | Bianco | 45× |
| Brick 1 x 1 | 3005 | Rosso scuro | 6× |
| Brick 2 x 8 | 3007 | Grigio bluastro chiaro | 33× |
| Brick 2 x 8 | 3007 | Bianco | 33× |
| Brick 2 x 8 | 3007 | Nero | 6× |
| Brick 1 x 8 | 3008 | Grigio bluastro chiaro | 2× |
| Brick 1 x 8 | 3008 | Bianco | 2× |
| Brick 1 x 8 | 3008 | Nero | 8× |
| Brick 1 x 8 | 3008 | Beige | 12× |
| Brick 1 x 6 | 3009 | Marrone rossastro | 18× |
| Brick 1 x 6 | 3009 | Grigio bluastro chiaro | 6× |
| Brick 1 x 6 | 3009 | Bianco | 28× |
| Brick 1 x 6 | 3009 | Nero | 8× |
| Brick 1 x 6 | 3009 | Beige | 2× |
| Brick 1 x 4 | 3010 | Nero | 8× |
| Brick 1 x 4 | 3010 | Nero | 26× |
| Brick 1 x 4 | 3010 | Grigio bluastro chiaro | 9× |
| Brick 1 x 4 | 3010 | Bianco | 29× |
| Brick 1 x 4 | 3010 | Giallo | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Grigio bluastro chiaro | 155× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Beige | 50× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Nero | 6× |
| Brick Curved 2 x 2, Two Top Studs | 30165 | Grigio bluastro scuro | 1× |
| Plate Special / Shield Rectangular with 4 Studs, Handle | 30166 | Grigio bluastro chiaro | 8× |
| Plate 2 x 4 | 3020 | Nero | 16× |
| Plate 2 x 4 | 3020 | Grigio bluastro scuro | 4× |
| Plate 2 x 4 | 3020 | Grigio bluastro chiaro | 1× |
| Plate 2 x 4 | 3020 | Grigio bluastro chiaro | 2× |
| Plate 2 x 4 | 3020 | Marrone rossastro | 30× |
| Plate 2 x 4 | 3020 | Giallo | 4× |
| Plate 2 x 4 | 3020 | Beige | 33× |
| Plate 2 x 3 | 3021 | Bianco | 69× |
| Plate 2 x 3 | 3021 | Arancione chiaro brillante | 91× |
| Plate 2 x 3 | 3021 | Beige | 8× |
| Plate 2 x 3 | 3021 | Grigio bluastro scuro | 39× |
| Plate 2 x 3 | 3021 | Rosso scuro | 8× |
| Plate 2 x 3 | 3021 | Grigio bluastro chiaro | 1× |
| Plate 2 x 3 | 3021 | Grigio bluastro chiaro | 30× |
| Plate 2 x 3 | 3021 | Rosso | 1× |
| Plate 2 x 2 | 3022 | Nero | 10× |
| Plate 2 x 2 | 3022 | Nero | 2× |
| Plate 2 x 2 | 3022 | Beige | 44× |
| Plate 2 x 2 | 3022 | Bianco | 22× |
| Plate 2 x 2 | 3022 | Grigio bluastro chiaro | 8× |
| Plate 2 x 2 | 3022 | Grigio bluastro chiaro | 2× |
| Plate 2 x 2 | 3022 | Rosso scuro | 1× |
| Equipment Zip Line Handle | 30229 | Grigio bluastro scuro | 11× |
| Plate 1 x 2 | 3023 | Nero | 142× |
| Plate 1 x 2 | 3023 | Giallo | 71× |
| Plate 1 x 2 | 3023 | Bianco | 36× |
| Plate 1 x 2 | 3023 | Beige | 21× |
| Plate 1 x 2 | 3023 | Rosso | 22× |
| Plate 1 x 2 | 3023 | Marrone rossastro | 105× |
| Plate 1 x 2 | 3023 | Beige scuro | 4× |
| Plate 1 x 2 | 3023 | Trans-azzurro | 2× |
| Plate 1 x 2 | 3023 | Nero | 10× |
| Plate 1 x 2 | 3023 | Grigio bluastro chiaro | 20× |
| Plate 1 x 2 | 3023 | Arancione chiaro brillante | 6× |
| Plate 1 x 2 | 3023 | Trans-Brown | 10× |
| Plate 1 x 2 | 3023 | Rosso scuro | 15× |
| Plate 1 x 1 | 3024 | Nero | 10× |
| Plate 1 x 1 | 3024 | Rosso scuro | 15× |
| Plate 1 x 1 | 3024 | Grigio bluastro chiaro | 12× |
| Plate 1 x 1 | 3024 | Marrone rossastro | 12× |
| Plate 1 x 1 | 3024 | Arancione chiaro brillante | 6× |
| Plate 1 x 1 | 3024 | Trans-Brown | 115× |
| Plate 1 x 1 | 3024 | Bianco | 197× |
| Plate 1 x 1 | 3024 | Beige | 20× |
| Plate 4 x 12 | 3029 | Nero | 1× |
| Plate 4 x 12 | 3029 | Grigio bluastro chiaro | 2× |
| Plate 4 x 10 | 3030 | Nero | 2× |
| Plate 4 x 10 | 3030 | Grigio bluastro chiaro | 8× |
| Plate 4 x 10 | 3030 | Rosso scuro | 8× |
| Plate 4 x 4 | 3031 | Bianco | 13× |
| Plate 4 x 4 | 3031 | Rosso scuro | 4× |
| Plate 4 x 4 | 3031 | Grigio bluastro scuro | 2× |
| Plate 4 x 4 | 3031 | Nero | 1× |
| Plate 4 x 6 | 3032 | Bianco | 6× |
| Plate 4 x 6 | 3032 | Beige | 2× |
| Plate 4 x 6 | 3032 | Grigio bluastro chiaro | 4× |
| Plate 4 x 6 | 3032 | Grigio bluastro scuro | 26× |
| Plate 6 x 10 | 3033 | Marrone rossastro | 1× |
| Plate 6 x 10 | 3033 | Bianco | 5× |
| Plate 2 x 8 | 3034 | Rosso scuro | 7× |
| Plate 2 x 8 | 3034 | Nero | 4× |
| Plate 2 x 8 | 3034 | Nero | 21× |
| Plate 2 x 8 | 3034 | Bianco | 15× |
| Plate 2 x 8 | 3034 | Marrone rossastro | 2× |
| Plate 2 x 8 | 3034 | Grigio bluastro chiaro | 3× |
| Plate 4 x 8 | 3035 | Beige | 3× |
| Plate 4 x 8 | 3035 | Bianco | 7× |
| Plate 6 x 8 | 3036 | Rosso scuro | 11× |
| Plate 6 x 8 | 3036 | Beige | 4× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Bianco | 10× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Arancione chiaro brillante | 8× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Nero | 2× |
| Slope 45° 2 x 3 | 3038 | Grigio bluastro chiaro | 11× |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | 30383 | Rosso | 1× |
| Slope 45? 2 x 2 | 3039 | Giallo | 4× |
| Slope 45? 2 x 2 | 3039 | Nero | 17× |
| Slope 45° 2 x 2 with Black Grill Print | 3039pr0009 | Bianco | 4× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Nero | 5× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Grigio bluastro chiaro | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Grigio bluastro chiaro | 26× |
| Wedge 3 x 3 Cut Corner | 30505 | Bianco | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Rosso | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Bianco | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Nero | 8× |
| Brick Round 1 x 1 Open Stud | 3062b | Grigio bluastro chiaro | 88× |
| Brick Round 1 x 1 Open Stud | 3062b | Marrone rossastro | 6× |
| Brick Round 1 x 1 Open Stud | 3062b | Nero | 35× |
| Brick 1 x 2 without Bottom Tube | 3065 | Trans-azzurro | 2× |
| Brick 1 x 4 without Bottom Tubes | 3066 | Trans-Brown | 1× |
| Tile 2 x 2 with Groove | 3068b | Bianco | 7× |
| Tile 2 x 2 with Groove | 3068b | Beige | 39× |
| Tile 2 x 2 with Groove | 3068b | Beige scuro | 12× |
| Tile 2 x 2 with Groove | 3068b | Rosso | 1× |
| Tile 2 x 2 with Groove | 3068b | Rosso scuro | 8× |
| Tile 2 x 2 with Groove | 3068b | Nero | 74× |
| Tile 1 x 2 with Groove | 3069b | Marrone rossastro | 1× |
| Tile 1 x 2 with Groove | 3069b | Nero | 16× |
| Tile 1 x 2 with Groove | 3069b | Blu scuro | 16× |
| Tile 1 x 2 with Groove | 3069b | Rosso scuro | 52× |
| Tile 1 x 2 with Groove | 3069b | Beige scuro | 11× |
| Tile 1 x 2 with Groove | 3069b | Grigio bluastro chiaro | 8× |
| Tile 1 x 2 with Groove | 3069b | Beige | 153× |
| Tile 1 x 2 with Groove | 3069b | Bianco | 76× |
| Tile 1 x 2 with Groove | 3069b | Trans-azzurro | 2× |
| Tile 1 x 1 with Groove | 3070b | Bianco | 137× |
| Tile 1 x 1 with Groove | 3070b | Verde scuro | 36× |
| Tile 1 x 1 with Groove | 3070b | Rosso scuro | 10× |
| Tile 1 x 1 with Groove | 3070b | Beige scuro | 1× |
| Tile 1 x 1 with Groove | 3070b | Marrone rossastro | 26× |
| Tile 1 x 1 with Groove | 3070b | Beige | 54× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Nero | 31× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Giallo | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Marrone rossastro | 9× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Grigio bluastro chiaro | 8× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Bianco | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Giallo | 2× |
| Technic Brick 1 x 14 [13 Pin Holes] | 32018 | Nero | 7× |
| Plate Special 1 x 2 with Door Rail | 32028 | Marrone rossastro | 24× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Marrone rossastro | 5× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Grigio bluastro chiaro | 1× |
| Technic Axle 2 Notched | 32062 | Rosso | 46× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Azzurro scuro | 4× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Grigio bluastro chiaro | 10× |
| Technic Axle 5 | 32073 | Grigio bluastro chiaro | 6× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Grigio bluastro chiaro | 7× |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 32124 | Nero | 12× |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 32124 | Bianco | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Grigio bluastro chiaro | 2× |
| Technic Brick 6 x 8 with 4 x 6 Opening | 32532 | Nero | 1× |
| Slope Inverted 45° 4 x 1 Double with 1 x 2 Recessed | 32802 | Grigio bluastro scuro | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Nero | 4× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Grigio bluastro chiaro | 8× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Rosso scuro | 2× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Grigio bluastro chiaro | 2× |
| Slope 33° 3 x 4 | 3297 | Nero | 2× |
| Slope 33° 3 x 2 | 3298 | Nero | 46× |
| Slope 33° 3 x 2 | 3298 | Rosso scuro | 2× |
| Food Hot Dog / Sausage | 33078 | Nero | 3× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Grigio bluastro chiaro | 46× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Beige | 44× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Marrone rossastro | 20× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Beige | 34× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Grigio bluastro chiaro | 15× |
| Plate 1 x 8 | 3460 | Beige | 49× |
| Plate 1 x 8 | 3460 | Nero | 7× |
| Plate 1 x 8 | 3460 | Arancione chiaro brillante | 9× |
| Plate 1 x 8 | 3460 | Rosso scuro | 4× |
| Plate 1 x 8 | 3460 | Beige scuro | 2× |
| Plate 1 x 8 | 3460 | Grigio bluastro chiaro | 8× |
| Plate 1 x 8 | 3460 | Grigio bluastro chiaro | 4× |
| Plate 1 x 8 | 3460 | Bianco | 11× |
| Plate 1 x 8 | 3460 | Giallo | 10× |
| Brick Special 1 x 2 with Vertical Closed Handle on Edge | 34816 | Grigio bluastro chiaro | 4× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Bianco | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Nero | 171× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Grigio bluastro chiaro | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Rosso | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Bianco | 2× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Beige | 2× |
| Brick 1 x 3 | 3622 | Grigio bluastro chiaro | 1× |
| Brick 1 x 3 | 3622 | Bianco | 38× |
| Brick 1 x 3 | 3622 | Marrone rossastro | 6× |
| Plate 1 x 3 | 3623 | Rosso scuro | 5× |
| Plate 1 x 3 | 3623 | Marrone rossastro | 20× |
| Plate 1 x 3 | 3623 | Rosso | 3× |
| Plate 1 x 3 | 3623 | Beige | 14× |
| Plate 1 x 3 | 3623 | Grigio bluastro chiaro | 3× |
| Plate 1 x 3 | 3623 | Giallo | 11× |
| Plate 1 x 3 | 3623 | Beige scuro | 2× |
| Plate 1 x 3 | 3623 | Bianco | 25× |
| Plate 1 x 3 | 3623 | Nero | 6× |
| Fence Lattice 1 x 4 x 1 | 3633 | Grigio bluastro chiaro | 8× |
| Fence Lattice 1 x 4 x 1 | 3633 | Bianco | 6× |
| Fence Lattice 1 x 4 x 1 | 3633 | Grigio bluastro scuro | 2× |
| Technic Gear 24 Tooth [New Style with Single Axle Hole] | 3648b | Grigio bluastro scuro | 4× |
| Brick Arch 1 x 4 | 3659 | Rosso scuro | 1× |
| Brick Arch 1 x 4 | 3659 | Nero | 14× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Nero | 27× |
| Slope Inverted 45° 2 x 1 | 3665 | Nero | 1× |
| Slope Inverted 45° 2 x 1 | 3665 | Marrone rossastro | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Giallo | 10× |
| Slope Inverted 45° 2 x 1 | 3665 | Rosso scuro | 2× |
| Plate 1 x 6 | 3666 | Rosso scuro | 2× |
| Plate 1 x 6 | 3666 | Marrone rossastro | 1× |
| Plate 1 x 6 | 3666 | Bianco | 24× |
| Plate 1 x 6 | 3666 | Giallo | 63× |
| Plate 1 x 6 | 3666 | Arancione chiaro brillante | 12× |
| Plate 1 x 6 | 3666 | Nero | 18× |
| Plate 1 x 6 | 3666 | Grigio bluastro chiaro | 16× |
| Slope 65° 2 x 2 x 2 with Bottom Tube | 3678b | Grigio bluastro chiaro | 6× |
| Slope 65° 2 x 2 x 2 with Bottom Tube | 3678b | Nero | 18× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Nougat medio | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Nero | 3× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Nero | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Grigio bluastro chiaro | 8× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Beige | 13× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Marrone rossastro | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Bianco | 155× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Nero | 1× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Grigio bluastro chiaro | 1× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Grigio bluastro chiaro | 2× |
| Technic Axle 4 | 3705 | Rosso | 2× |
| Technic Axle 4 | 3705 | Nero | 3× |
| Technic Axle 8 | 3707 | Rosso | 5× |
| Plate 1 x 4 | 3710 | Bianco | 50× |
| Plate 1 x 4 | 3710 | Nero | 25× |
| Plate 1 x 4 | 3710 | Nero | 70× |
| Plate 1 x 4 | 3710 | Arancione chiaro brillante | 16× |
| Plate 1 x 4 | 3710 | Grigio bluastro scuro | 8× |
| Plate 1 x 4 | 3710 | Rosso scuro | 4× |
| Plate 1 x 4 | 3710 | Grigio bluastro chiaro | 2× |
| Plate 1 x 4 | 3710 | Grigio bluastro chiaro | 10× |
| Plate 1 x 4 | 3710 | Beige | 2× |
| Technic Bush | 3713 | Nero | 1× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Bianco | 3× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Rosso scuro | 16× |
| Technic Axle 10 | 3737 | Rosso | 2× |
| Technic Plate 2 x 8 [7 Holes] | 3738 | Nero | 2× |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | 3747b | Beige | 2× |
| Equipment Candlestick | 37762 | Bianco | 2× |
| Plate 2 x 6 | 3795 | Grigio bluastro scuro | 7× |
| Plate 2 x 6 | 3795 | Nero | 11× |
| Plate 2 x 6 | 3795 | Giallo | 10× |
| Plate 2 x 6 | 3795 | Beige | 4× |
| Plate 2 x 6 | 3795 | Grigio bluastro chiaro | 35× |
| Plate 2 x 6 | 3795 | Bianco | 2× |
| Plate 2 x 6 | 3795 | Rosso scuro | 16× |
| Plate 2 x 6 | 3795 | Nero | 4× |
| Door 1 x 3 x 1 Right | 3821 | Marrone rossastro | 10× |
| Door 1 x 3 x 1 Right | 3821 | Grigio bluastro chiaro | 4× |
| Door 1 x 3 x 1 Right | 3821 | Bianco | 8× |
| Door 1 x 3 x 1 Left | 3822 | Bianco | 8× |
| Door 1 x 3 x 1 Left | 3822 | Marrone rossastro | 10× |
| Door 1 x 3 x 1 Left | 3822 | Grigio bluastro chiaro | 4× |
| Hinge Brick 1 x 4 [Upper] | 3830 | Grigio bluastro chiaro | 4× |
| Hinge Brick 1 x 4 [Lower] | 3831 | Grigio bluastro chiaro | 4× |
| Plate 2 x 10 | 3832 | Bianco | 6× |
| Plate 2 x 10 | 3832 | Nero | 8× |
| Plate 2 x 10 | 3832 | Nero | 2× |
| Plate 2 x 10 | 3832 | Grigio bluastro chiaro | 6× |
| Window Pane Latticed 1 x 2 x 2 | 38320 | Bianco | 17× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Grigio bluastro scuro | 1× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Nero | 1× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Nero | 4× |
| Hinge Brick 1 x 2 Base | 3937 | Nero | 4× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Bianco | 11× |
| Plate 6 x 6 | 3958 | Beige | 2× |
| Plate 6 x 6 | 3958 | Grigio bluastro chiaro | 37× |
| Brick Special 2 x 4 with 3 Axle Holes | 39789 | Marrone rossastro | 14× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Grigio bluastro scuro | 21× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Grigio bluastro chiaro | 4× |
| Technic Beam 1 x 9 Thick | 40490 | Rosso scuro | 3× |
| Brick Special 1 x 1 with Headlight | 4070 | Bianco | 8× |
| Brick Special 1 x 1 with Headlight | 4070 | Beige | 44× |
| Brick Special 1 x 1 with Headlight | 4070 | Marrone rossastro | 46× |
| Brick Special 1 x 1 with Headlight | 4070 | Grigio bluastro scuro | 4× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Nero | 8× |
| Plate 8 x 8 | 41539 | Grigio bluastro chiaro | 10× |
| Slope 33° 3 x 3 | 4161 | Rosso scuro | 4× |
| Slope 33° 3 x 3 | 4161 | Nero | 4× |
| Tile 1 x 8 with Groove | 4162 | Rosso scuro | 2× |
| Tile 1 x 8 with Groove | 4162 | Bianco | 18× |
| Tile 1 x 8 with Groove | 4162 | Grigio bluastro chiaro | 2× |
| Tile 1 x 8 with Groove | 4162 | Beige | 11× |
| Tile 1 x 8 with Groove | 4162 | Giallo | 6× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Nero | 6× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Rosso scuro | 13× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Beige | 5× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Bianco | 6× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Beige | 26× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Nero | 1× |
| Wedge Curved 6 x 2 Right, Inner Ridges | 41747 | Nero | 1× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Nero | 1× |
| Wedge Curved 8 x 3 x 2 Open Right | 41749 | Nero | 1× |
| Wedge Curved 8 x 3 x 2 Open Left | 41750 | Nero | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Beige | 8× |
| Wedge Plate 4 x 2 Right | 41769 | Bianco | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Beige | 8× |
| Wedge Plate 4 x 2 Left | 41770 | Bianco | 1× |
| Technic Wedge Belt Wheel [aka Pulley] | 4185 | Grigio bluastro chiaro | 4× |
| Plate 8 x 8 with Rounded End | 41948 | Nougat medio | 2× |
| Brick Curved 6 x 1 Inverted | 42023 | Giallo | 4× |
| Brick Special 1 x 2 with Groove | 4216 | Beige | 2× |
| Technic Pin 1/2 | 4274 | Grigio bluastro chiaro | 1× |
| Technic Pin 1/2 | 4274 | Nero | 3× |
| Plate 2 x 16 | 4282 | Bianco | 13× |
| Slope 33° 3 x 1 | 4286 | Rosso scuro | 2× |
| Slope 33° 3 x 1 | 4286 | Nero | 6× |
| Slope Curved 8 x 2 No Studs | 42918 | Nero | 10× |
| Slope Curved 8 x 2 No Studs | 42918 | Rosso scuro | 18× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Nero | 3× |
| Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Top | 43045 | Grigio bluastro chiaro | 4× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Nero | 5× |
| Wedge Sloped 45° 4 x 2 Right | 43720 | Nero | 2× |
| Wedge Sloped 45° 4 x 2 Left | 43721 | Nero | 2× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | 44301b | Nero | 2× |
| Slope 45° 2 x 8 | 4445 | Nero | 4× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Grigio bluastro chiaro | 4× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Rosso scuro | 22× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Beige | 4× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Grigio bluastro chiaro | 4× |
| Plate 1 x 10 | 4477 | Bianco | 29× |
| Plate 1 x 10 | 4477 | Grigio bluastro chiaro | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Bianco | 13× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Grigio bluastro chiaro | 1× |
| Brick Special 1 x 2 with Pin - Bottom Stud Holder | 44865 | Rosso | 2× |
| Plate Special 1 x 8 with Door Rail | 4510 | Marrone rossastro | 6× |
| Technic Axle 3 | 4519 | Grigio bluastro chiaro | 4× |
| Technic Axle 3 | 4519 | Giallo | 8× |
| Tap 1 x 1 without Hole in Spout | 4599b | Bianco | 58× |
| Tap 1 x 1 without Hole in Spout | 4599b | Oro perlato | 22× |
| Bar 1 x 3 [Clip / Anti-Stud] | 4735 | Nero | 1× |
| Wedge Plate 12 x 3 Left | 47397 | Rosso scuro | 7× |
| Wedge Plate 12 x 3 Left | 47397 | Grigio bluastro chiaro | 1× |
| Wedge Plate 12 x 3 Left | 47397 | Beige | 2× |
| Wedge Plate 12 x 3 Right | 47398 | Grigio bluastro chiaro | 1× |
| Wedge Plate 12 x 3 Right | 47398 | Rosso scuro | 7× |
| Wedge Plate 12 x 3 Right | 47398 | Beige | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Grigio bluastro scuro | 28× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Marrone rossastro | 39× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Beige | 6× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Bianco | 6× |
| Slope Inverted 45° 4 x 2 Double | 4871 | Grigio bluastro scuro | 1× |
| Slope Inverted 45° 4 x 2 Double | 4871 | Bianco | 1× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | 48729b | Bianco | 4× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Bianco | 6× |
| Plate Special 1 x 1 with Tooth | 49668 | Beige | 32× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Beige | 2× |
DNA della build
Dettagli inventario pezzi per Titanic
Con 9092 pezzi, questa build e +353% rispetto al set Icons medio e +1645% rispetto alla media dei set del 2021.
Rispetto al set Icons medio
Set Icons medio: 2007 pezzi su 80 altri set.
Rispetto al set medio del 2021
Set medio del 2021: 521 pezzi su 471 altri set.
Profilo colori
Colore dominante
Bianco
Pezzi unici
26.7 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Plate 1 x 2
464xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.

![Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg)



![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6042953.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037746.jpg)


