


Tornate indietro ai ruggenti anni '10 con il magnifico LEGO® Icons Ford Model T (11376-1). Questa autentica replica cattura lo spirito pionieristico, dotata di un tettuccio in tessuto ripiegabile e una cabina di guida meticolosamente dettagliata con sterzo funzionante. Scoprite funzioni intricate come il parabrezza diviso ripiegabile, una singola portiera passeggero apribile e un bagagliaio posteriore apribile. Sollevate i pannelli del cofano per rivelare il motore con una ventola che gira azionata da una manovella, o sbirciate sotto il sedile per accedere al serbatoio del carburante. Rifinito con carrozzeria nera classica, eleganti accenti dorati e alti cerchi a raggi con pneumatici sottili in gomma bianca, questo capolavoro automobilistico vintage è un elegante e nostalgico pezzo da esposizione per ogni appassionato di auto americane classiche.
Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Radiator Grille 1x2 2412 | Nero | 6× |
![]() Plate 2 x 2 Corner 2420 | Nero | 4× |
![]() Tile 1 x 4 with Groove 2431 | Nero | 3× |
![]() Plate Special 2 x 2 with 2 Pin Holes 2817 | Nero | 5× |
![]() Brick Special 1 x 2 with Grille 2877 | Nero | 4× |
![]() Brick 1 x 2 3004 | Nero | 2× |
![]() Brick 1 x 1 3005 | Nero | 2× |
![]() Brick 1 x 4 3010 | Nero | 2× |
![]() Plate 2 x 4 3020 | Nero | 4× |
![]() Plate 2 x 3 3021 | Nero | 10× |
Visualizzati 10 di 309 pezzi
🔓 Registrati per vedere tutti i pezzi| Brick 1 x 2 | 3004 | Nero | 2× |
| Brick 1 x 1 | 3005 | Nero | 2× |
| Brick 1 x 4 | 3010 | Nero | 2× |
| Plate 2 x 4 | 3020 | Nero | 4× |
| Plate 2 x 3 | 3021 | Nero | 10× |
| Plate 2 x 2 | 3022 | Nero | 12× |
| Plate 1 x 2 | 3023 | Nero | 18× |
| Plate 1 x 1 | 3024 | Nero | 10× |
| Plate 6 x 10 | 3033 | Nero | 1× |
| Plate 2 x 8 | 3034 | Nero | 1× |
| Slope 45? 2 x 2 | 3039 | Nero | 1× |
| FLAT TILE 1X2 | 3069 | Nero | 10× |
| FLAT TILE 1X1 | 3070 | Nero | 10× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Nero | 4× |
| Plate 1 x 8 | 3460 | Nero | 1× |
| Plate 1 x 3 | 3623 | Nero | 5× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Nero | 1× |
| Plate 1 x 4 | 3710 | Nero | 16× |
| Plate 2 x 6 | 3795 | Nero | 2× |
| Plate 6 x 6 | 3958 | Nero | 4× |
| PLATE 2X2 ROUND | 4032 | Nero | 1× |
| Brick Special 1 x 1 Studs on 4 Sides | 4733 | Nero | 3× |
| BRICK Ø16 W. CROSS | 6143 | Nero | 1× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Nero | 2× |
| Tile 1 x 6 with Groove | 6636 | Nero | 10× |
| Wedge Plate 4 x 2 Right | 41769 | Nero | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Nero | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Nero | 6× |
| Plate Round Corner 3 x 3 | 30357 | Nero | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Nero | 4× |
| Plate 4 x 4 | 3031 | Nero | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Nero | 8× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 3× |
| Plate 1 x 12 | 60479 | Nero | 6× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Nero | 10× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Nero | 1× |
| Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 60581 | Nero | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Nero | 6× |
| Tile 2 x 4 with Groove | 87079 | Nero | 6× |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 85080 | Nero | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Nero | 9× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Nero | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Nero | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Nero | 10× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Nero | 3× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Nero | 3× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Nero | 1× |
| PLATE 3X4 WITH 4 KNOBS | 17836 | Nero | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 1× |
| SHAFT 3M Ø3.2 | 17715 | Nero | 6× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Nero | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Nero | 7× |
| Wedge Plate 2 x 2 Left | 24299 | Nero | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Nero | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Nero | 1× |
| Tile 2 x 3 | 26603 | Nero | 4× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Nero | 1× |
| STICK 6M W/FLANGE | 28921 | Nero | 2× |
| Plate 3 x 3 | 11212 | Nero | 2× |
| Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | 25214 | Nero | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Nero | 14× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Nero | 2× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Nero | 6× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Nero | 5× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Nero | 8× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Nero | 6× |
| BAD ROBOT ARM | 49753 | Nero | 4× |
| Wedge Sloped 45° 4 x 2 Left | 43721 | Nero | 1× |
| Wedge Sloped 45° 4 x 2 Right | 43720 | Nero | 1× |
| Equipment Candlestick | 37762 | Nero | 8× |
| PLATE 1X1 W/HOLDER VERTICAL | 52738 | Nero | 2× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Nero | 2× |
| HOLDER Ø3.2 W/TUBE Ø3.2 HOLE | 44873 | Nero | 4× |
| Tile 2 x 6 | 69729 | Nero | 2× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Nero | 2× |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 68568 | Nero | 4× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Nero | 2× |
| PLATE 1X1 W. HOLDER | 44860 | Nero | 2× |
| Weapon Hilt Symmetric | 66909 | Nero | 4× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Nero | 2× |
| Plate 1x1 with Up Right Holder | 44842 | Nero | 2× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Nero | 4× |
| Bar Holder with Clip and 90° Angle (Mechanical Leg) | 72869 | Nero | 2× |
| Plate 1 x 5 | 78329 | Nero | 4× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Nero | 2× |
| Tile Special 2 x 3 with 2 Clips without Tab between Clips | 65886 | Nero | 2× |
| Propeller 3 Blade 3 Diameter with Pin Hole | 65768 | Nero | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Nero | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Nero | 4× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Nero | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Nero | 2× |
| Plate 3 x 3 Corner | 77844 | Nero | 3× |
| BRICK 4X6, W/ 4.85 HOLE, CUT OUT | 1679 | Nero | 1× |
| Bracket 1 x 6 - 2 x 6 Inverted | 5090 | Nero | 1× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Nero | 4× |
| Sports Hockey Stick | 64000 | Nero | 1× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Nero | 1× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Nero | 2× |
| Slope Curved 2 x 2 with Stud Notch Left | 5095 | Nero | 1× |
| Slope Curved 2 x 2 with Stud Notch Right | 5093 | Nero | 1× |
| Tile Round 2 x 2 Half Circle | 5520 | Nero | 4× |
| Brick Curved 1 x 2 x 1 2/3 with 1 Cutout | 5907 | Nero | 8× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Nero | 5× |
| Cone 1 x 1 Inverted with Bar at Bottom (Ice Cream Cone) | 11610 | Nero | 2× |
| Brick Curved 1 x 1 | 7126 | Nero | 2× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Nero | 10× |
| Brick Arch 1 x 5 x 3 1/3 Curved Top | 5845 | Nero | 4× |
| Brick Round Corner, Curved 2 x 2 x 1 2/3 Quarter Dome with 1 Cutout | 5906 | Nero | 2× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Nero | 6× |
| Slope 45° 2 x 4 with 2/3 Inverted Cutout and no Studs | 5540 | Nero | 2× |
| Slope 1 x 4 with 1 x 2 Cutout | 5654 | Nero | 4× |
| Technic Axle 4 | 3705 | Nero | 1× |
| Technic Axle 6 | 3706 | Nero | 3× |
| Technic Axle 2 Notched | 32062 | Nero | 4× |
| Technic Beam 1 x 3 Thick | 32523 | Nero | 2× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Nero | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Nero | 4× |
| Technic Beam 1 x 13 Thick | 41239 | Nero | 2× |
| T-PIECE | 4697 | Nero | 2× |
| DOUBLE Ø4.85 HOLE W.Ø3.2 SHAFT | 29173 | Nero | 2× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Nero | 1× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Nero | 10× |
| CROSS HOLES W/ DOUBLE, DIA. 3.2 SHAFT | 49133 | Nero | 6× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Nero | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Nero | 2× |
| Wheel 11 x 8 with Center Groove | 42610 | Nero | 1× |
| Technic Beam 3 x 0.5 Liftarm with Boss and Blocked, Squared Pin Hole | 61408 | Nero | 1× |
| Technic Pin Connector 3L with 2 Pins and Center Hole [Pin Ridges Across Part] | 46189 | Nero | 1× |
| LEVER 5M | 44864 | Nero | 4× |
| BUSH FOR CROSS AXLE | 42798 | Nero | 8× |
| TECHNIC LEVER 2M | 44862 | Nero | 2× |
| TOGGEL JOINT | 3182 | Nero | 2× |
| Technic Link 1 x 8 | 5996 | Nero | 1× |
| Plate 1 x 4 | 3710 | Beige | 1× |
| Plate 1 x 2 | 3023 | Beige | 13× |
| Plate 2 x 4 | 3020 | Beige | 6× |
| Plate 2 x 3 | 3021 | Beige | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Beige | 3× |
| Brick 1 x 3 | 3622 | Beige | 4× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Beige | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Beige | 1× |
| Technic Gear 12 Tooth Bevel | 6589 | Beige | 1× |
| CONNECTOR PEG/CROSS AXLE | 6562 | Beige | 1× |
| Technic Axle 4 with Centre Stop | 99008 | Beige | 4× |
| Technic Pin 3/4 | 32002 | Beige | 5× |
| TECHNIC LEVER 2M | 44862 | Beige | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Nero | 4× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Nero | 6× |
| ELEMENT SEPARATOR | 31510 | Arancione | 1× |
| Technic Rubber Belt 24mm | 85544 | Rosso | 1× |
| Technic Axle 8 | 3707 | Rosso | 1× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rosso | 1× |
| Technic Pin 1/2 with Friction | 89678 | Rosso | 2× |
| Technic Axle 5 | 32073 | Giallo | 4× |
| ENGINE 1X2 HALF BEAM, W/ CROSS AXLE | 8232 | Giallo | 2× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Grigio bluastro chiaro | 1× |
| Technic Steering Wheel Small (3 Studs Diameter) | 2819 | Grigio bluastro chiaro | 1× |
| Plate 2 x 2 Corner | 2420 | Grigio bluastro scuro | 4× |
| Plate 2 x 10 | 3832 | Grigio bluastro scuro | 1× |
| Plate 1 x 1 | 3024 | Grigio bluastro scuro | 6× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Grigio bluastro scuro | 1× |
| Plate 2 x 8 | 3034 | Grigio bluastro scuro | 2× |
| Plate 1 x 4 | 3710 | Grigio bluastro scuro | 5× |
| Plate 2 x 6 | 3795 | Grigio bluastro scuro | 1× |
| Plate 2 x 3 | 3021 | Grigio bluastro scuro | 3× |
| FLAT TILE 1X2 | 3069 | Grigio bluastro scuro | 2× |
| Plate 1 x 6 | 3666 | Grigio bluastro scuro | 2× |
| Plate 1 x 2 | 3023 | Grigio bluastro scuro | 2× |
| Plate 2 x 4 | 3020 | Grigio bluastro scuro | 2× |
| Plate 2 x 2 | 3022 | Grigio bluastro scuro | 2× |
| Brick 1 x 1 | 3005 | Grigio bluastro scuro | 2× |
| Brick 1 x 6 | 3009 | Grigio bluastro scuro | 1× |
| Plate 1 x 3 | 3623 | Grigio bluastro scuro | 11× |
| Plate 4 x 4 | 3031 | Grigio bluastro scuro | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Grigio bluastro scuro | 4× |
| Plate Special 4 x 6 with Trap Door Hinge [Long Pins] | 92099 | Grigio bluastro scuro | 1× |
| Plate 3 x 3 | 11212 | Grigio bluastro scuro | 4× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Grigio bluastro scuro | 1× |
| PLATE 2X2 W 1 KNOB | 23893 | Grigio bluastro scuro | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Grigio bluastro scuro | 4× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Grigio bluastro scuro | 6× |
| PLATE 1X1 W. HOLDER | 44860 | Grigio bluastro scuro | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Grigio bluastro scuro | 1× |
| SPACE SKELETON ARM | 49754 | Grigio bluastro scuro | 4× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Grigio bluastro scuro | 2× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Grigio bluastro scuro | 4× |
| HOLDER Ø3.2 W/TUBE Ø3.2 HOLE | 44873 | Grigio bluastro scuro | 2× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Grigio bluastro scuro | 1× |
| Bar 2L with Stop in Center | 78258 | Grigio bluastro scuro | 7× |
| FLAT TILE 1X1, 1/2 CIRCLE | 35399 | Grigio bluastro scuro | 32× |
| 3.2 SHAFT W/ 5.9 BALL | 67692 | Grigio bluastro scuro | 2× |
| LIGHT SWORD - BLADE | 21462 | Grigio bluastro scuro | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Grigio bluastro scuro | 6× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Grigio bluastro scuro | 4× |
| Plate Round 1 x 1 with Hollow Stud and Bar on Underside - Long Space | 79194 | Grigio bluastro scuro | 4× |
| Weapon Gun / Pistol Two Barrel, 8 Ribs | 6018 | Grigio bluastro scuro | 1× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Grigio bluastro scuro | 1× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Grigio bluastro scuro | 2× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Grigio bluastro scuro | 1× |
| Technic Axle 4 with Stop | 87083 | Grigio bluastro scuro | 1× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Grigio bluastro scuro | 2× |
| Technic Pin 1/2 with Friction | 89678 | Grigio bluastro scuro | 5× |
| Technic Beam 1 x 11 Thick with Alternating Holes | 73507 | Grigio bluastro scuro | 2× |
| Plate 1 x 3 | 3623 | Nero | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Argento metallico | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Grigio bluastro chiaro | 2× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Grigio bluastro chiaro | 4× |
| Tile Special 1 x 2 with Handle | 2432 | Grigio bluastro chiaro | 1× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Grigio bluastro chiaro | 4× |
| Plate 2 x 4 | 3020 | Grigio bluastro chiaro | 2× |
| Plate 1 x 2 | 3023 | Grigio bluastro chiaro | 2× |
| Plate 1 x 1 | 3024 | Grigio bluastro chiaro | 2× |
| Plate 1 x 6 | 3666 | Grigio bluastro chiaro | 3× |
| PLATE 2X2 ROUND | 4032 | Grigio bluastro chiaro | 13× |
| Brick Special 1 x 1 with Headlight | 4070 | Grigio bluastro chiaro | 8× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Grigio bluastro chiaro | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Grigio bluastro chiaro | 4× |
| Technic Brick 4 x 4 with 2 x 2 Opening | 32324 | Grigio bluastro chiaro | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Grigio bluastro chiaro | 4× |
| Brick Round 2 x 2 [Grill] | 92947 | Grigio bluastro chiaro | 1× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Grigio bluastro chiaro | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Grigio bluastro chiaro | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Grigio bluastro chiaro | 2× |
| STICK 6M W/FLANGE | 28921 | Grigio bluastro chiaro | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Grigio bluastro chiaro | 1× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Grigio bluastro chiaro | 2× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Grigio bluastro chiaro | 2× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Grigio bluastro chiaro | 4× |
| PLATE 1X1 W. HOLDER | 44860 | Grigio bluastro chiaro | 2× |
| Exhaust Pipe with Technic Pin - Flat End, Squared Hole | 65571 | Grigio bluastro chiaro | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Grigio bluastro chiaro | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Grigio bluastro chiaro | 2× |
| BRICK 2X2 ROUND W/ HOLE Ø4,85 | 79566 | Grigio bluastro chiaro | 1× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Grigio bluastro chiaro | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Grigio bluastro chiaro | 1× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Grigio bluastro chiaro | 1× |
| Technic Pin 1/2 | 4274 | Grigio bluastro chiaro | 1× |
| Technic Axle 3 | 4519 | Grigio bluastro chiaro | 2× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Grigio bluastro chiaro | 2× |
| 1/2 BUSH | 42136 | Grigio bluastro chiaro | 23× |
| Technic Gear 20 Tooth Bevel | 32198 | Grigio bluastro chiaro | 4× |
| TECHNIC LEVER 3M | 65123 | Grigio bluastro chiaro | 1× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Grigio bluastro chiaro | 1× |
| Technic Pin Connector Hub Perpendicular 3L with 2 Pins | 2393 | Grigio bluastro chiaro | 2× |
| BALL W. CROSS AXLE | 3985 | Grigio bluastro chiaro | 3× |
| Plate 1 x 2 | 3023 | Nero | 4× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Nero | 2× |
| ROUND BRICK 1X1 | 3062 | Marrone rossastro | 2× |
| Brick 2 x 2 Corner | 2357 | Nero | 1× |
| Brick 2 x 4 | 3001 | Nero | 1× |
| Slope 45? 2 x 2 | 3039 | Nero | 1× |
| Brick 2 x 2 | 3003 | Nero | 2× |
| Plate 2 x 8 | 3034 | Nero | 1× |
| Plate 2 x 2 Corner | 2420 | Nero | 2× |
| Brick 2 x 3 | 3002 | Nero | 2× |
| Plate 1 x 8 | 3460 | Nero | 1× |
| Plate 6 x 6 | 3958 | Nero | 1× |
| Plate 1 x 1 | 3024 | Nero | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Nero | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Nero | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Marrone rossastro | 6× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Nero | 4× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Nero | 4× |
| Tile 2 x 3 | 26603 | Nero | 1× |
| FLAT TILE 1X1, 1/2 CIRCLE | 35399 | Marrone rossastro | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Nero | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Nero | 6× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Nero | 8× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Marrone rossastro | 6× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Nero | 2× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Nero | 1× |
| Technic Axle 3 with Stop | 24316 | Marrone rossastro | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Beige scuro | 6× |
| FLAT TILE 1X1, ROUND | 35381 | Beige scuro | 1× |
| Equipment Cutlery - Fork | 79741 | Argento opaco | 2× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Pearl Titanium | 1× |
| KITCHEN EQUIPMENT, NO. 9 | 3576 | Trans-trasparente | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 29387 | Trans-trasparente | 2× |
| FLAT TILE 1X1 | 35403 | Trans-trasparente | 6× |
| FLAT TILE 1X1, ROUND | 35380 | Trans-azzurro | 3× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Giallo | 6× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Giallo | 1× |
| FLAT TILE 1X2 | 3069 | Medium Lime | 2× |
| Equipment Hose Nozzle / Gun with Side String Hole Simplified | 60849 | Giallo | 2× |
| FEZ | 29175 | Medium Lime | 1× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Medium Lime | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Medium Lime | 1× |
| Plate 1 x 2 | 3023 | Giallo | 3× |
| Plate 1x1 with Up Right Holder | 44842 | Medium Lime | 3× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Giallo | 2× |
| Brick Round 2 x 2 Dome Bottom [Open Stud] | 15395 | Arancione chiaro brillante | 2× |
| Equipment Sextant | 30154 | Oro perlato | 1× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Giallo | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Giallo | 2× |
| FLAT TILE 1X1, ROUND, NO. 326 | 110030 | Medium Lime | 1× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Giallo | 1× |
| Plate 1 x 8 | 3460 | Bianco | 2× |
| Plate 1 x 4 | 3710 | Bianco | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Bianco | 6× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Bianco | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Bianco | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Bianco | 1× |
| Technic Axle Pin 3L without Friction Ridges and 2L Axle | 65249 | Bianco | 2× |
DNA della build
Dettagli inventario pezzi per Ford Model T
Con 1060 pezzi, questa build e -50% rispetto al set Icons medio e +69% rispetto alla media dei set del 2026.
Rispetto al set Icons medio
Set Icons medio: 2107 pezzi su 80 altri set.
Rispetto al set medio del 2026
Set medio del 2026: 627 pezzi su 427 altri set.
Profilo colori
Colore dominante
Nero
Pezzi unici
4.4 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Plate 1 x 2
42xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.









