


Tuxedo Cat
🏷️ 21349-1•🎨 LEGO Ideas and CUUSOO•📅 2024•🧱 1710 pezzi•Esperto
Costruisci un dettagliato compagno felino con il modello LEGO Ideas Tuxedo Cat (21349-1) da 1710 pezzi, una fedele rappresentazione del gatto bianco e nero. Questo pezzo da esposizione snodabile offre personalizzazione del suo carattere, permettendo ai costruttori di scegliere tra occhi gialli sorprendenti o blu profondo. Ulteriori articolazioni sono presenti nella testa girevole, nelle orecchie, nelle zampe e nella coda regolabili, consentendo varie pose dinamiche. Il modello presenta anche una bocca ricostruibile, che offre opzioni per un'espressione aperta o chiusa. Questa creazione LEGO Ideas costituisce un progetto di costruzione mirato, ideale da posizionare su uno scaffale o una scrivania, aggiungendo un tocco di natura domestica a qualsiasi spazio.
Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Nero | 8× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Bianco | 6× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Grigio bluastro scuro | 8× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Beige | 18× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Nero | 3× |
![]() Plate 3 x 3 11212 | Bianco | 4× |
![]() Plate 3 x 3 11212 | Grigio bluastro scuro | 3× |
![]() Plate 3 x 3 11212 | Nero | 4× |
![]() Plate 3 x 3 11212 | Beige | 2× |
![]() Tile Round 1 x 2 1126 | Rosa brillante | 1× |
Visualizzati 10 di 339 pezzi
🔓 Registrati per vedere tutti i pezzi| Plate 3 x 3 | 11212 | Bianco | 4× |
| Plate 3 x 3 | 11212 | Grigio bluastro scuro | 3× |
| Plate 3 x 3 | 11212 | Nero | 4× |
| Plate 3 x 3 | 11212 | Beige | 2× |
| Tile Round 1 x 2 | 1126 | Rosa brillante | 1× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Grigio bluastro chiaro | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Bianco | 9× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Nero | 14× |
| Plate Round 4 x 4 with 2 x 2 Round Opening | 11833 | Grigio bluastro chiaro | 1× |
| Wedge Plate 4 x 9 with Stud Notches | 14181 | Nero | 1× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Grigio bluastro scuro | 4× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Grigio bluastro chiaro | 1× |
| Plate Special 1 x 2 with 5.9mm Towball Socket and Towball | 14419 | Grigio bluastro scuro | 1× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Grigio bluastro chiaro | 2× |
| Tile 2 x 2 Corner | 14719 | Nero | 10× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Nero | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Nero | 12× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Bianco | 8× |
| Tile Round 2 x 2 with Hole | 15535 | Beige | 6× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Giallo | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Bianco | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 10× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Bianco | 1× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Nero | 20× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Grigio bluastro scuro | 1× |
| Plate Round 1 x 2 Half Circle with Stud (Jumper) | 1745 | Rosa brillante | 2× |
| Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts | 1750 | Nero | 10× |
| Slope 33° 2 x 2 Double / Inverted | 1762 | Bianco | 1× |
| Plate Special 1 x 2 with Handles on Ends | 18649 | Nero | 1× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Nero | 12× |
| Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] | 1927 | Grigio bluastro chiaro | 4× |
| Bar 2L with Towball | 22484 | Grigio bluastro scuro | 1× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Bianco | 12× |
| Plate Special 1 x 2 with End Towball | 22890 | Grigio bluastro scuro | 2× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Bianco | 4× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Grigio bluastro scuro | 8× |
| Plate 2 x 2 Corner | 2420 | Beige | 2× |
| Plate 2 x 2 Corner | 2420 | Grigio bluastro scuro | 6× |
| Plate 2 x 2 Corner | 2420 | Bianco | 4× |
| Plate 2 x 2 Corner | 2420 | Grigio bluastro chiaro | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Nero | 4× |
| Wedge Plate 2 x 2 Left | 24299 | Nero | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Nero | 2× |
| Slope Curved 3 x 2 No Studs | 24309 | Bianco | 4× |
| Slope Curved 3 x 2 No Studs | 24309 | Nero | 33× |
| Tile 1 x 4 with Groove | 2431 | Nero | 6× |
| Plate 2 x 12 | 2445 | Beige | 2× |
| Plate 2 x 12 | 2445 | Grigio bluastro chiaro | 10× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Grigio bluastro scuro | 4× |
| Brick 2 x 6 | 2456 | Beige | 1× |
| Brick 2 x 6 | 2456 | Bianco | 9× |
| Tile Round 1 x 1 Quarter | 25269 | Bianco | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Nero | 1× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Nero | 1× |
| Plate Round 2 x 2 with Rounded Bottom with Yellow Cat Eye print | 2654pr9997 | Nero | 2× |
| Plate Round 2 x 2 with Rounded Bottom with Blue Cat Eye print | 2654pr9998 | Nero | 2× |
| Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 26599 | Nero | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Nero | 2× |
| Tile 2 x 3 | 26603 | Giallo | 2× |
| Tile 2 x 3 | 26603 | Nero | 6× |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 26604 | Nero | 4× |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 26604 | Bianco | 4× |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 26604 | Grigio bluastro scuro | 22× |
| Windscreen 6 x 4 x 1 Hexagonal with Handle | 27262 | Nero | 2× |
| Tile 4 x 4 Curved, Macaroni | 27507 | Nero | 4× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Nero | 12× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Nero | 6× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Bianco | 3× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Bianco | 3× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Nero | 6× |
| Brick 2 x 4 | 3001 | Bianco | 2× |
| Brick 2 x 3 | 3002 | Beige | 6× |
| Brick 2 x 3 | 3002 | Grigio bluastro scuro | 2× |
| Brick 2 x 2 | 3003 | Beige | 7× |
| Brick 2 x 2 | 3003 | Bianco | 4× |
| Brick 1 x 2 | 3004 | Beige | 4× |
| Brick 1 x 2 | 3004 | Nero | 2× |
| Brick 1 x 2 | 3004 | Bianco | 10× |
| Brick 1 x 2 | 3004 | Grigio bluastro chiaro | 2× |
| Brick 1 x 1 | 3005 | Grigio bluastro scuro | 4× |
| Brick 1 x 1 | 3005 | Nero | 1× |
| Brick 2 x 10 | 3006 | Bianco | 2× |
| Brick 2 x 8 | 3007 | Beige | 3× |
| Brick 1 x 8 | 3008 | Grigio bluastro scuro | 2× |
| Brick 1 x 8 | 3008 | Beige | 1× |
| Brick 1 x 8 | 3008 | Bianco | 2× |
| Brick 1 x 6 | 3009 | Grigio bluastro scuro | 2× |
| Brick 1 x 6 | 3009 | Beige | 2× |
| Brick 1 x 6 | 3009 | Bianco | 1× |
| Brick 1 x 4 | 3010 | Nero | 2× |
| Brick 1 x 4 | 3010 | Grigio bluastro chiaro | 4× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Grigio bluastro scuro | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Beige | 2× |
| Plate 2 x 4 | 3020 | Nero | 15× |
| Plate 2 x 4 | 3020 | Bianco | 17× |
| Plate 2 x 4 | 3020 | Grigio bluastro chiaro | 4× |
| Plate 2 x 4 | 3020 | Grigio bluastro scuro | 4× |
| Plate 2 x 4 | 3020 | Beige | 6× |
| Plate 2 x 3 | 3021 | Nero | 17× |
| Plate 2 x 3 | 3021 | Bianco | 4× |
| Plate 2 x 3 | 3021 | Grigio bluastro chiaro | 2× |
| Plate 2 x 3 | 3021 | Grigio bluastro scuro | 10× |
| Plate 2 x 3 | 3021 | Beige | 2× |
| Plate 2 x 2 | 3022 | Grigio bluastro scuro | 1× |
| Plate 2 x 2 | 3022 | Rosso | 1× |
| Plate 2 x 2 | 3022 | Nero | 4× |
| Plate 2 x 2 | 3022 | Beige | 1× |
| Plate 2 x 2 | 3022 | Rosa brillante | 1× |
| Plate 2 x 2 | 3022 | Giallo | 1× |
| Plate 2 x 2 | 3022 | Bianco | 24× |
| Plate 2 x 2 | 3022 | Grigio bluastro chiaro | 2× |
| Plate 1 x 2 | 3023 | Bianco | 12× |
| Plate 1 x 2 | 3023 | Nero | 30× |
| Plate 1 x 2 | 3023 | Beige | 11× |
| Plate 1 x 1 | 3024 | Nero | 12× |
| Plate 1 x 1 | 3024 | Bianco | 7× |
| Plate 1 x 1 | 3024 | Grigio bluastro chiaro | 6× |
| Plate 4 x 4 | 3031 | Nero | 7× |
| Plate 4 x 4 | 3031 | Beige | 4× |
| Plate 4 x 6 | 3032 | Bianco | 1× |
| Plate 4 x 6 | 3032 | Grigio bluastro chiaro | 1× |
| Plate 4 x 6 | 3032 | Beige | 2× |
| Plate 2 x 8 | 3034 | Grigio bluastro scuro | 4× |
| Plate 2 x 8 | 3034 | Bianco | 1× |
| Plate 2 x 8 | 3034 | Grigio bluastro chiaro | 13× |
| Plate 2 x 8 | 3034 | Nero | 3× |
| Plate 4 x 8 | 3035 | Grigio bluastro chiaro | 2× |
| Plate Round Corner 3 x 3 | 30357 | Nero | 3× |
| Plate 6 x 8 | 3036 | Grigio bluastro chiaro | 1× |
| Slope 45? 2 x 2 | 3039 | Bianco | 4× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Nero | 4× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Grigio bluastro scuro | 34× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Nero | 4× |
| Plate Round Corner 4 x 4 | 30565 | Grigio bluastro chiaro | 2× |
| Plate Round Corner 4 x 4 | 30565 | Nero | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Rosso | 4× |
| Brick Round 1 x 1 Open Stud | 3062b | Beige | 4× |
| Tile 2 x 2 with Groove | 3068b | Nero | 2× |
| Tile 1 x 2 with Groove | 3069b | Nero | 8× |
| Tile 1 x 1 with Groove | 3070b | Nero | 2× |
| Tile 1 x 1 with Groove | 3070b | Bianco | 1× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Bianco | 8× |
| Technic Plate 2 x 6 [5 Holes] | 32001 | Grigio bluastro chiaro | 2× |
| Technic Plate 2 x 6 [5 Holes] | 32001 | Nero | 2× |
| Technic Axle and Pin Connector Angled #5 - 112.5° | 32015 | Grigio bluastro scuro | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Rosso | 26× |
| Technic Beam 1 x 5 Thick | 32316 | Giallo | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Grigio bluastro scuro | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Nero | 12× |
| Slope 33° 3 x 4 | 3297 | Nero | 4× |
| Slope 33° 3 x 2 | 3298 | Nero | 8× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Bianco | 8× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Nero | 21× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Beige | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Bianco | 1× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Rosso | 1× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Giallo | 1× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Giallo | 8× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Bianco | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Nero | 1× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Grigio bluastro chiaro | 7× |
| Plate 1 x 8 | 3460 | Nero | 1× |
| Plate 1 x 8 | 3460 | Rosso | 8× |
| Plate 1 x 8 | 3460 | Bianco | 13× |
| Plate 1 x 8 | 3460 | Beige | 10× |
| Plate 1 x 8 | 3460 | Grigio bluastro chiaro | 17× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Nero | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Bianco | 43× |
| Slope Curved 1 x 4 x 1 2/3 No Studs | 3573 | Bianco | 5× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Nero | 11× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Bianco | 4× |
| Brick 1 x 3 | 3622 | Grigio bluastro scuro | 2× |
| Brick 1 x 3 | 3622 | Nero | 4× |
| Plate 1 x 3 | 3623 | Giallo | 2× |
| Plate 1 x 3 | 3623 | Beige | 2× |
| Plate 1 x 3 | 3623 | Grigio bluastro chiaro | 6× |
| Plate 1 x 3 | 3623 | Grigio bluastro scuro | 3× |
| Plate 1 x 3 | 3623 | Nero | 20× |
| Plate 1 x 3 | 3623 | Bianco | 5× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Grigio bluastro scuro | 6× |
| Plate 1 x 6 | 3666 | Rosso | 8× |
| Plate 1 x 6 | 3666 | Bianco | 3× |
| Plate 1 x 6 | 3666 | Giallo | 7× |
| Plate 1 x 6 | 3666 | Grigio bluastro scuro | 3× |
| Plate 1 x 6 | 3666 | Nero | 15× |
| Slope 33° 3 x 3 Double Convex | 3675 | Nero | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Nero | 4× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Nero | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Giallo | 14× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Bianco | 1× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Nero | 1× |
| Technic Axle 4 | 3705 | Nero | 1× |
| Plate 1 x 4 | 3710 | Grigio bluastro chiaro | 15× |
| Plate 1 x 4 | 3710 | Bianco | 14× |
| Plate 1 x 4 | 3710 | Beige | 2× |
| Plate 1 x 4 | 3710 | Nero | 28× |
| Plate 1 x 4 | 3710 | Rosso | 1× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Bianco | 10× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Nero | 6× |
| Technic Plate 2 x 8 [7 Holes] | 3738 | Bianco | 4× |
| Technic Plate 2 x 8 [7 Holes] | 3738 | Grigio bluastro scuro | 1× |
| Plate 2 x 6 | 3795 | Beige | 7× |
| Plate 2 x 6 | 3795 | Bianco | 8× |
| Plate 2 x 6 | 3795 | Nero | 4× |
| Plate 2 x 10 | 3832 | Grigio bluastro chiaro | 4× |
| Plate 2 x 10 | 3832 | Bianco | 4× |
| Plate 2 x 10 | 3832 | Nero | 2× |
| Plate 2 x 10 | 3832 | Grigio bluastro scuro | 2× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Beige | 11× |
| Plate 6 x 6 | 3958 | Grigio bluastro chiaro | 1× |
| Plate 6 x 6 | 3958 | Nero | 2× |
| Brick Special 2 x 4 with 3 Axle Holes | 39789 | Nero | 1× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Rosso scuro | 1× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Giallo | 14× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Nero | 2× |
| Brick Special 1 x 1 with Headlight | 4070 | Grigio bluastro scuro | 2× |
| Slope 33° 3 x 3 | 4161 | Nero | 6× |
| Tile 1 x 8 with Groove | 4162 | Nero | 1× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Giallo | 2× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Nero | 6× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Nero | 3× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Grigio bluastro scuro | 2× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Bianco | 1× |
| Wedge Curved 8 x 3 x 2 Open Right | 41749 | Nero | 6× |
| Wedge Curved 8 x 3 x 2 Open Left | 41750 | Nero | 6× |
| Wedge Plate 4 x 2 Left | 41770 | Nero | 1× |
| Brick Curved 6 x 1 | 42022 | Bianco | 1× |
| Brick Curved 6 x 1 | 42022 | Nero | 3× |
| Slope 33° 3 x 1 | 4286 | Nero | 5× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Nero | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Bianco | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Nero | 4× |
| Wedge Sloped 45° 6 x 4 Double / 33°, 9 Bottom Tubes [Train Roof] | 4365 | Bianco | 1× |
| Brick Curved 6 x 2 | 44126 | Bianco | 2× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove | 44301a | Rosso | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Bianco | 2× |
| Plate 1 x 10 | 4477 | Nero | 5× |
| Technic Axle 3 | 4519 | Giallo | 2× |
| Bracket 1 x 2 with 1 x 2 Vertical Studs | 4585 | Bianco | 3× |
| Brick Special 1 x 1 Studs on 4 Sides | 4733 | Grigio bluastro scuro | 1× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Grigio bluastro scuro | 2× |
| Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 47458 | Bianco | 1× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Nero | 1× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Nero | 1× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Nero | 1× |
| Slope Curved 2 x 2 with Stud Notch Right | 5093 | Bianco | 1× |
| Slope Curved 2 x 2 with Stud Notch Right | 5093 | Nero | 7× |
| Slope Curved 2 x 2 with Stud Notch Left | 5095 | Bianco | 1× |
| Slope Curved 2 x 2 with Stud Notch Left | 5095 | Nero | 7× |
| Slope Curved 3 x 1 No Studs | 50950 | Nero | 8× |
| Slope Curved 3 x 1 No Studs | 50950 | Bianco | 3× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Bianco | 1× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Bianco | 1× |
| Slope Curved 1 x 4 with Stud Notch Right | 5414 | Bianco | 2× |
| Slope Curved 1 x 4 with Stud Notch Right | 5414 | Nero | 1× |
| Slope Curved 1 x 4 with Stud Notch Left | 5415 | Nero | 1× |
| Slope Curved 1 x 4 with Stud Notch Left | 5415 | Bianco | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Bianco | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Giallo | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Giallo | 2× |
| Tile Round 2 x 2 Half Circle | 5520 | Bianco | 8× |
| Wedge Curved 6 x 2 Right, Smooth Inner Walls | 5711 | Bianco | 1× |
| Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout | 58846 | Nero | 2× |
| Brick Arch 1 x 3 x 2 Curved Top | 6005 | Nero | 4× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Nero | 2× |
| Plate 1 x 12 | 60479 | Grigio bluastro chiaro | 1× |
| Window 1 x 4 x 3 without Shutter Tabs | 60594 | Beige | 18× |
| Brick Curved 2 x 4 x 1 1/3 | 6081 | Nero | 4× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Bianco | 2× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Nero | 4× |
| Brick 1 x 10 | 6111 | Beige | 1× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Nero | 4× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Grigio bluastro chiaro | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rosso | 28× |
| Turntable 4 x 4 Square Base, Locking | 61485 | Grigio bluastro chiaro | 1× |
| Panel 1 x 1 x 1 Corner | 6231 | Giallo | 1× |
| Plate Special 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center | 63082 | Nero | 4× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Grigio bluastro chiaro | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Giallo | 2× |
| Wedge Plate 2 x 4 27° Right | 65426 | Nero | 1× |
| Wedge Plate 2 x 4 27° Left | 65429 | Nero | 1× |
| Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) | 65509 | Grigio bluastro scuro | 4× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Grigio bluastro chiaro | 1× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Nero | 1× |
| Road Sign Clip-on 2.2 x 2.667 Triangular with Open O Clip | 65676 | Nero | 1× |
| Tile 1 x 6 with Groove | 6636 | Nero | 3× |
| Tile 1 x 6 with Groove | 6636 | Grigio bluastro scuro | 1× |
| Tile 1 x 6 with Groove | 6636 | Bianco | 1× |
| Tile 2 x 6 | 69729 | Nero | 10× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Nero | 4× |
| Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 3 Support Walls on Bottom | 72132 | Grigio bluastro chiaro | 2× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Bianco | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Bianco | 1× |
| Brick Round Corner 5 x 5 x 1 Slope, Bottom Cut Outs, No Studs, Flat Top | 76795 | Nero | 2× |
| Brick Round Corner, Curved 3 x 3 x 1 Quarter Circle | 76797 | Bianco | 4× |
| Brick Round Corner, Curved 3 x 3 x 1 Quarter Circle | 76797 | Nero | 7× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Nero | 2× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Grigio bluastro chiaro | 6× |
| Plate 1 x 5 | 78329 | Grigio bluastro chiaro | 8× |
| Plate 1 x 5 | 78329 | Beige | 14× |
| Plate 1 x 5 | 78329 | Nero | 5× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Bianco | 3× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Nero | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Grigio bluastro scuro | 3× |
| Plate Round Corner 5 x 5 with 4 x 4 Round Cutout | 80015 | Nero | 4× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Nero | 6× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Nero | 6× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Grigio bluastro chiaro | 6× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Bianco | 2× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Grigio bluastro chiaro | 6× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Nero | 2× |
| Tile 2 x 4 with Groove | 87079 | Nero | 14× |
| Tile 2 x 4 with Groove | 87079 | Bianco | 5× |
| Brick Round 4 x 4 Centre Hole | 87081 | Nero | 1× |
| Technic Axle 4 with Stop | 87083 | Grigio bluastro scuro | 1× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Nero | 3× |
| Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | 87552 | Nero | 2× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Grigio bluastro scuro | 12× |
| Wedge 2 x 2 Facet | 87620 | Nero | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Nero | 2× |
| Technic Pin 1/2 with Friction | 89678 | Rosso | 6× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Nero | 2× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Giallo | 2× |
| Slope Curved 4 x 2 No Studs | 93606 | Nero | 30× |
| Brick Round Corner 6 x 6 with 33° Slope and Facet Cutout | 95188 | Nero | 8× |
| Brick and Axle Separator v2.0 | 96874 | Arancione | 1× |
| Tile Round 1 x 1 | 98138 | Giallo | 2× |
| Slope Curved 6 x 4 x 2/3 Quad Curved with 2 x 2 Studs | 98281 | Bianco | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Bianco | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Grigio bluastro chiaro | 6× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Nero | 7× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Bianco | 1× |
DNA della build
Dettagli inventario pezzi per Tuxedo Cat
Con 1710 pezzi, questa build e +43% rispetto al set LEGO Ideas and CUUSOO medio e +199% rispetto alla media dei set del 2024.
Rispetto al set LEGO Ideas and CUUSOO medio
Set LEGO Ideas and CUUSOO medio: 1199 pezzi su 97 altri set.
Rispetto al set medio del 2024
Set medio del 2024: 571 pezzi su 561 altri set.
Profilo colori
Colore dominante
Nero
Pezzi unici
8 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Plate 1 x 4
60xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037746.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6045936.jpg)







