


Aston Martin Aramco AMR25 F1 Car (42240-1) is a LEGO Technic from 2026. This page uses the available set and theme data until a fuller product description is available.
Questo set non è ancora uscito (previsto il July 1, 2026).
Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Radiator Grille 1x2 2412 | Nero | 1× |
![]() Brick 1 x 2 3004 | Nero | 1× |
![]() Plate 1 x 3 3623 | Nero | 1× |
![]() PLATE 2X2 ROUND 4032 | Nero | 1× |
![]() Tile 1 x 8 with Groove 4162 | Nero | 2× |
![]() Tile 1 x 6 with Groove 6636 | Nero | 2× |
![]() Plate Round 2 x 2 with Rounded Bottom [Boat Stud] 2654 | Nero | 1× |
![]() Brick Special 1 x 1 with Stud on 1 Side 87087 | Nero | 1× |
![]() Slope Curved 2 x 1 No Studs [1/2 Bow] 11477 | Nero | 3× |
![]() Tile Round 2 x 2 with Hole 15535 | Nero | 1× |
Visualizzati 10 di 227 pezzi
🔓 Registrati per vedere tutti i pezzi| Tile 1 x 6 with Groove | 6636 | Nero | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Nero | 1× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Nero | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Nero | 3× |
| Tile Round 2 x 2 with Hole | 15535 | Nero | 1× |
| Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | 25214 | Nero | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Nero | 5× |
| Wheel Arch, Mudguard 2 x 3 x 1 1/3 with 2 x 2 Plate | 49097 | Nero | 1× |
| PLATE 1X2 W/STUB VERTICAL/END | 49715 | Nero | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Nero | 2× |
| FLAT TILE 1X1, ROUND | 35381 | Nero | 1× |
| Dome 1 x 1 x 2/3 | 6908 | Nero | 1× |
| Technic Axle 4 | 3705 | Nero | 10× |
| Technic Axle 6 | 3706 | Nero | 3× |
| Technic Axle 2 Notched | 32062 | Nero | 10× |
| Technic Beam 1 x 5 Thick | 32316 | Nero | 4× |
| Technic Beam 1 x 3 Thick | 32523 | Nero | 8× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Nero | 1× |
| Technic Beam 1 x 2 Thick | 43857 | Nero | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Nero | 4× |
| Technic Beam 1 x 13 Thick | 41239 | Nero | 1× |
| TECHNIC 15M BEAM | 64871 | Nero | 11× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Nero | 2× |
| Technic Panel Fairing #14 Large Short Smooth, Side B | 64680 | Nero | 1× |
| Technic Panel Fairing #13 Large Short Smooth, Side A | 64394 | Nero | 1× |
| Technic Panel 5 x 11 x 1 | 64782 | Nero | 1× |
| TECHNIC 9M BEAM | 64289 | Nero | 9× |
| Axle Hose, Soft 16L | 32202 | Nero | 1× |
| Technic Panel 3 x 11 x 1 | 15458 | Nero | 4× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Nero | 17× |
| Technic Pin Connector Hub with 2 Perpendicular Axles | 10197 | Nero | 6× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Nero | 10× |
| Technic Panel Curved 7 x 3 with 2 Pin Holes through Panel Surface | 24119 | Nero | 6× |
| Technic Panel 5 x 11 x 1 Tapered | 18945 | Nero | 2× |
| Technic Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface | 62531 | Nero | 4× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Nero | 4× |
| CROSS BLOCK 90° | 40146 | Nero | 6× |
| ANGLE ELEMENT, 157,5 DEGR. [3] | 42128 | Nero | 4× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Nero | 17× |
| ANGULAR PANEL 3X5X3 W/ 4.85 HOLE | 35396 | Nero | 2× |
| TECHNIC LEVER 3X3M, 90° | 59605 | Nero | 4× |
| TECHNIC ANG. BEAM 4X2 90 DEG | 42137 | Nero | 16× |
| ANGLE ELEMENT, 180 DEGREES [2] | 42134 | Nero | 3× |
| CROSS BLOCK 3M | 42796 | Nero | 11× |
| DOUBLE CROSS BLOCK | 42142 | Nero | 6× |
| CROSS BLOCK/FORM 2X2X2 | 42193 | Nero | 4× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Nero | 268× |
| TECHNIC ANGULAR BEAM 4X6 | 42149 | Nero | 2× |
| TECHNIC CROSS BLOCK 2X1 | 42163 | Nero | 4× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Nero | 6× |
| RIM Ø 56 X 34 | 51150 | Nero | 4× |
| RIGHT PANEL 2X5 (N0 21) | 43499 | Nero | 3× |
| LEFT PANEL 2X5 (NR 22) | 43500 | Nero | 3× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Nero | 11× |
| Technic Beam 2 x 3 L-Shape with Quarter Ellipse Thick | 71708 | Nero | 3× |
| LEVER 5M | 44864 | Nero | 1× |
| RACK 7 M | 65127 | Nero | 1× |
| LEVER 1X4, WITHOUT NOTCH | 63782 | Nero | 2× |
| Technic Panel Fairing 2 x 3 x 1 | 71682 | Nero | 11× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Nero | 6× |
| TECHNIC LEVER 3M | 65123 | Nero | 2× |
| Technic Panel 3 x 7 x 1 | 71709 | Nero | 6× |
| BUSH FOR CROSS AXLE | 42798 | Nero | 6× |
| TECHNIC LEVER 2M | 44862 | Nero | 56× |
| Technic Steering Wheel Hub Holder with 2 Pin Holes and 2 Axle Holes, No Slots | 65766 | Nero | 2× |
| Technic Panel Curved and Bent Angled Right 5 x 4 x 3 #70 | 80271 | Nero | 2× |
| Technic Panel Curved and Bent Angled Left 5 x 4 x 3 #71 | 80272 | Nero | 2× |
| CROSS BLOCK 3X2 | 42191 | Nero | 3× |
| Technic Beam Frame 3 x 19 with 2 Center Cross Beams, 3 Openings Thick | 67491 | Nero | 2× |
| Technic Steering Wheel Pilot's Yoke [Closed Top] | 49151 | Nero | 1× |
| Technic Panel Fairing 2 x 1 x 1 | 89679 | Nero | 20× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Nero | 1× |
| Technic Panel Triangle 5 x 4 Right | 80274 | Nero | 2× |
| Technic Panel Triangle 5 x 4 Left | 80278 | Nero | 2× |
| Technic Beam 2 x 5 L-Shape with Quarter Ellipse Thick | 80286 | Nero | 2× |
| Technic Beam 3 x 5 L-Shape with Alternating Holes | 2477 | Nero | 4× |
| Technic Beam 1 x 7 Thick with Alternating Holes | 2391 | Nero | 7× |
| ROTORBLAD 8M | 58489 | Nero | 5× |
| Technic Beam Frame 3 x 13 with 1 Center Cross Beams, 2 Openings Thick | 4526 | Nero | 4× |
| RIGHT PANEL CURVED 5X13X2, NO. 1 | 3583 | Nero | 1× |
| LEFT PANEL CURVED 5X13X2, NO. 1 | 1984 | Nero | 1× |
| Technic Panel Fairing Long Smooth Inverted, Side A #40 | 5741 | Nero | 1× |
| Technic Panel Round Corner 5 x 3 x 2 Right | 2442 | Nero | 2× |
| Technic Panel Round Corner 5 x 3 x 2 Left | 2438 | Nero | 2× |
| Technic Link 1 x 8 | 5996 | Nero | 6× |
| Technic Steering Arm 3 x 1 with Towball Socket | 5997 | Nero | 6× |
| Technic Panel Fairing #43 5 x 7, Side B Inverted | 6606 | Nero | 1× |
| Technic Panel Fairing #42 5 x 7, Side A Inverted | 6609 | Nero | 1× |
| Technic Wishbone 7 x 8 x 2 | 5780 | Nero | 8× |
| Technic Panel Fairing Long Smooth Inverted, Side B # 41 | 5742 | Nero | 1× |
| Technic Panel Fairing #7 3L Very Small Smooth, Side A | 2387 | Nero | 3× |
| Technic Panel Fairing #8 3L Very Small Smooth, Side B | 2389 | Nero | 3× |
| Technic Panel Curved 7 x 3 Inverted | 4500 | Nero | 4× |
| Technic Panel Fairing 2 x 5 x 1 | 7101 | Nero | 10× |
| RIGHT PANEL CURVED 3X13X2, NO. 1 | 7227 | Nero | 4× |
| Technic Beam 1 x 3 Thick with Center Axle Hole | 7229 | Nero | 6× |
| LEFT PANEL CURVED 3X13X2, NO. 1 | 7225 | Nero | 4× |
| Technic Gear 12 Tooth Bevel | 6589 | Beige | 3× |
| CONNECTOR PEG/CROSS AXLE | 6562 | Beige | 8× |
| Technic Axle 4 with Centre Stop | 99008 | Beige | 1× |
| Technic Pin Long without Friction Ridges, with Anti-Roll Notch | 39888 | Beige | 4× |
| Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 18575 | Beige | 1× |
| PLASTIC MOTOR, CRANK | 65126 | Beige | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Nero | 67× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Dark Blue-Violet | 1× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Nero | 104× |
| Technic Gear 12 Tooth with Axle Hole | 69778 | Nero | 3× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Grigio bluastro scuro | 1× |
| Technic Pin Connector 3L with 2 Pins and Center Hole [Pin Ridges Across Part] | 46189 | Nero | 1× |
| Technic Axle 2 Notched | 32062 | Rosso | 76× |
| Technic Gear 16 Tooth with Clutch on Both Sides | 18946 | Rosso | 1× |
| Technic Axle 4 | 3705 | Rosso | 4× |
| Technic Axle 6 | 3706 | Rosso | 3× |
| Technic Axle 8 | 3707 | Rosso | 1× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Rosso | 15× |
| DOUBLE CROSS BLOCK | 42142 | Rosso | 1× |
| Technic Changeover Catch - New Style | 51149 | Rosso | 1× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 44874 | Rosso | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Rosso | 20× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rosso | 12× |
| Technic Pin 1/2 with Friction | 89678 | Rosso | 25× |
| Technic Engine Piston Round | 2851 | Giallo | 6× |
| Technic Beam 1 x 5 Thin | 32017 | Giallo | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Giallo | 3× |
| Technic Axle 3 | 4519 | Giallo | 20× |
| Technic Axle 5 | 32073 | Giallo | 1× |
| Technic Axle 7 | 44294 | Giallo | 6× |
| Technic Axle 11 | 23948 | Giallo | 1× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Giallo | 2× |
| SHOCK ABSORBER, EXTRA HARD, NO. 1 | 89954 | Giallo | 4× |
| ENGINE 1X2 HALF BEAM, W/ CROSS AXLE | 8232 | Giallo | 2× |
| Plate 2 x 3 | 3021 | Grigio bluastro chiaro | 1× |
| Plate 1 x 1 | 3024 | Argento metallico | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Argento metallico | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Grigio bluastro chiaro | 2× |
| Slope Curved 4 x 2 No Studs | 93606 | Grigio bluastro chiaro | 1× |
| TECHNIC 9M BEAM | 64289 | Argento metallico | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Grigio bluastro chiaro | 5× |
| Technic Gear 20 Tooth with Clutch on Both Sides | 81346 | Grigio bluastro chiaro | 1× |
| Technic Beam 1 x 5 Thick | 32316 | Grigio bluastro chiaro | 3× |
| TECHNIC 15M BEAM | 64871 | Argento metallico | 2× |
| ANGLE ELEMENT, 0 DEGREES [1] | 42127 | Argento metallico | 3× |
| LEVER 1X4, WITHOUT NOTCH | 63782 | Argento metallico | 4× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Argento metallico | 14× |
| Technic Panel Fairing 2 x 1 x 1 | 89679 | Grigio bluastro chiaro | 4× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Grigio bluastro chiaro | 1× |
| Technic Panel Round Corner 5 x 3 x 2 Left | 2438 | Blu sabbia | 2× |
| Technic Panel Round Corner 5 x 3 x 2 Right | 2442 | Blu sabbia | 2× |
| Technic Panel Fairing #7 3L Very Small Smooth, Side A | 2387 | Grigio bluastro chiaro | 3× |
| Technic Panel Fairing #8 3L Very Small Smooth, Side B | 2389 | Grigio bluastro chiaro | 3× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Grigio bluastro chiaro | 13× |
| ANGULAR PANEL 3X5X3 W/ 4.85 HOLE | 35396 | Argento metallico | 2× |
| SPUR GEAR, M1, Z8, W/ CROSS HOLE | 8169 | Grigio bluastro scuro | 4× |
| Technic Beam 1 x 5 Thick | 32316 | Grigio bluastro scuro | 2× |
| Technic Beam 1 x 7 Thick | 32524 | Grigio bluastro scuro | 4× |
| DIFFERENTIALE 3M Z 28 | 62821 | Grigio bluastro scuro | 1× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Grigio bluastro scuro | 2× |
| Technic Steering / CV Joint Axle | 92906 | Grigio bluastro scuro | 2× |
| Technic Steering Hub for Portal Axle | 92909 | Grigio bluastro scuro | 4× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Grigio bluastro scuro | 4× |
| Technic Axle 4 with Stop | 87083 | Grigio bluastro scuro | 4× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Grigio bluastro scuro | 6× |
| Technic Driving Ring 3L | 18947 | Grigio bluastro scuro | 1× |
| CROSS BLOCK 90° | 40146 | Grigio bluastro scuro | 6× |
| ANGLE ELEMENT, 180 DEGREES [2] | 42134 | Grigio bluastro scuro | 3× |
| CROSS BLOCK 3M | 42796 | Grigio bluastro scuro | 11× |
| DOUBLE CROSS BLOCK | 42142 | Grigio bluastro scuro | 2× |
| Technic Connector Beam 3 x 3 | 39793 | Grigio bluastro scuro | 1× |
| TRIANGEL | 65193 | Grigio bluastro scuro | 2× |
| Technic Beam 2 x 3 L-Shape with Quarter Ellipse Thick | 71708 | Grigio bluastro scuro | 2× |
| TECHNIC LEVER 3M | 65123 | Grigio bluastro scuro | 16× |
| LEVER 5M | 44864 | Grigio bluastro scuro | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Grigio bluastro scuro | 3× |
| Technic Beam 3 x 5 Thick [90° Offset Centre Beam Holes] | 14720 | Grigio bluastro scuro | 3× |
| Technic Beam 2 x 3 Thick [90° Offset Centre Beam Hole] | 3167 | Grigio bluastro scuro | 1× |
| Brick Round 2 x 2 [Grill] | 92947 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Grigio bluastro chiaro | 1× |
| Technic Axle 5 | 32073 | Grigio bluastro chiaro | 7× |
| Technic Beam 1 x 3 Thick | 32523 | Grigio bluastro chiaro | 1× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Grigio bluastro chiaro | 2× |
| Technic Axle 3 | 4519 | Grigio bluastro chiaro | 5× |
| Technic Beam 1 x 2 Thick | 43857 | Grigio bluastro chiaro | 2× |
| Technic Beam 1 x 7 Thick | 32524 | Grigio bluastro chiaro | 6× |
| Technic Beam 1 x 13 Thick | 41239 | Grigio bluastro chiaro | 2× |
| Technic Axle 9 | 60485 | Grigio bluastro chiaro | 1× |
| Technic Beam Frame 5 x 7 with 3 x 5 Opening Thick | 64179 | Grigio bluastro chiaro | 2× |
| Technic Beam 5 x 11 with 3 x 5 Opening Frame Thick | 64178 | Grigio bluastro chiaro | 1× |
| TECHNIC 11M BEAM | 64290 | Grigio bluastro chiaro | 1× |
| Technic Gear 16 Tooth Reinforced [New Style] | 94925 | Grigio bluastro chiaro | 4× |
| Technic Engine Connecting Rod | 2852 | Grigio bluastro chiaro | 6× |
| WHEEL BEARING BACK | 28833 | Grigio bluastro chiaro | 2× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Grigio bluastro chiaro | 2× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Grigio bluastro chiaro | 2× |
| LT CARDAN BALL | 53673 | Grigio bluastro chiaro | 4× |
| 1/2 BUSH | 42136 | Grigio bluastro chiaro | 17× |
| BUSH FOR CROSS AXLE | 42798 | Grigio bluastro chiaro | 1× |
| Technic Pin Connector Hub Perpendicular 3 x 3 Bent with 4 Pins (Pin Ridges Along Part) | 49130 | Grigio bluastro chiaro | 2× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 44874 | Grigio bluastro chiaro | 1× |
| CROSS BLOCK 3X2 | 42191 | Grigio bluastro chiaro | 9× |
| Technic Universal Joint 3L [Complete Assembly] | 61903 | Grigio bluastro chiaro | 1× |
| Technic Pin Long 3l, No Friction Ridges, with Stop and Hole | 77765 | Grigio bluastro chiaro | 2× |
| Technic Axle and Pin Connector Perpendicular Double Split [Reinforced] | 69819 | Grigio bluastro chiaro | 2× |
| TECHNIC LEVER 3M | 65123 | Grigio bluastro chiaro | 2× |
| Technic Pin Connector Hub Perpendicular 3L with 2 Pins | 2393 | Grigio bluastro chiaro | 4× |
| BALL W. CROSS AXLE | 3985 | Grigio bluastro chiaro | 2× |
| Technic Beam 1 x 2 with Towball Straight | 5995 | Grigio bluastro chiaro | 4× |
| Technic Engine Cylinder, No Studs | 6608 | Grigio bluastro chiaro | 6× |
| Technic Beam Special 1 x 5 x 3 | 6614 | Grigio bluastro chiaro | 1× |
| Technic Beam 1 x 3 Thick with Center Axle Hole | 7229 | Grigio bluastro chiaro | 2× |
| Technic Axle 3 with Stop | 24316 | Marrone rossastro | 24× |
| Technic Axle 5 with Stop | 15462 | Marrone rossastro | 8× |
| CROSSAXLE 3M WITH KNOB | 13670 | Beige scuro | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Nero | 4× |
| Weapon Harpoon [Smooth Shaft] | 18041 | Nero | 1× |
| LIGHT SWORD BLADE | 28697 | Trans-azzurro | 2× |
| FLAT TILE 1X1, 1/2 CIRCLE | 35398 | Trans-azzurro | 2× |
| FLAT TILE 1X4 | 35371 | Trans-azzurro | 2× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Bianco | 3× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Bianco | 10× |
| GEAR SHIFTER CONNECTOR 3M | 49136 | Bianco | 1× |
| LEVER 5M | 44864 | Bianco | 1× |
| Technic Beam 1 x 3 Thick with Center Axle Hole | 7229 | Bianco | 2× |
DNA della build
Dettagli inventario pezzi per Aston Martin Aramco AMR25 F1 Car
Con 1547 pezzi, questa build e +140% rispetto al set Technic medio e +149% rispetto alla media dei set del 2026.
Rispetto al set Technic medio
Set Technic medio: 645 pezzi su 450 altri set.
Rispetto al set medio del 2026
Set medio del 2026: 622 pezzi su 441 altri set.
Profilo colori
Colore dominante
Nero
Pezzi unici
8.3 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Technic Pin with Friction Ridges Lengthwise with No Center Slots
268xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.






![Plate Round 2 x 2 with Rounded Bottom [Boat Stud]](https://cdn.rebrickable.com/media/parts/elements/4278359.jpg)

![Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6047276.jpg)
