


Comanda il cantiere edile definitivo con il set LEGO City 60494-1 Dumper e Pala Meccanica. Questo impressionante duo porta in vita un'azione di costruzione dinamica, presentando un colossale dumper con un cassone ribaltabile completamente funzionante, pronto a trasportare vaste quantità di materiale. La sua robusta compagna, la pala meccanica articolata, vanta un potente braccio estensibile e una massiccia benna inclinabile, perfetta per raccogliere e sgombrare anche il terreno più ostile. Due minifigure dedicate di operai edili, equipaggiate con attrezzature di sicurezza essenziali, azionano con perizia queste macchine pesanti. Completo di accessori vitali per il cantiere come coni stradali e un mucchio simulato di mattoni, questo set è progettato per un gioco immaginativo senza fine e rappresenta un'esposizione maestosa per qualsiasi paesaggio LEGO City.
Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Brick 2 x 2 Corner 2357 | Nero | 4× |
![]() Plate 2 x 2 Corner 2420 | Nero | 8× |
![]() Tile 1 x 4 with Groove 2431 | Nero | 6× |
![]() Tile Special 1 x 2 with Handle 2432 | Nero | 2× |
![]() Brick 2 x 4 3001 | Nero | 1× |
![]() Brick 1 x 2 3004 | Nero | 4× |
![]() Plate 2 x 3 3021 | Nero | 2× |
![]() Plate 2 x 2 3022 | Nero | 2× |
![]() Plate 4 x 8 3035 | Nero | 1× |
![]() Plate Special 3 x 2 with Rounded End, Hole 3176 | Nero | 4× |
Visualizzati 10 di 368 pezzi
🔓 Registrati per vedere tutti i pezzi| Brick 1 x 2 | 3004 | Nero | 4× |
| Plate 2 x 3 | 3021 | Nero | 2× |
| Plate 2 x 2 | 3022 | Nero | 2× |
| Plate 4 x 8 | 3035 | Nero | 1× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Nero | 4× |
| Plate 1 x 6 | 3666 | Nero | 5× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Nero | 3× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Nero | 2× |
| Plate 2 x 6 | 3795 | Nero | 3× |
| PLATE 2X2 ROUND | 4032 | Nero | 2× |
| Seat / Chair 2 x 2 | 4079 | Marrone rossastro | 1× |
| Plate 2 x 16 | 4282 | Nero | 2× |
| ROOF TILE 1X3/25° INV. | 4287 | Nero | 2× |
| Tile 1 x 6 with Groove | 6636 | Nero | 4× |
| Panel 1 x 1 x 1 Corner | 6231 | Nero | 4× |
| ROOF TILE 1X2/45° | 3040 | Nero | 2× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Nero | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Nero | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Nero | 1× |
| Fence Lattice 1 x 4 x 2 | 3185 | Nero | 2× |
| Equipment Shovel [Rounded Handle End] | 3837 | Nero | 1× |
| Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs | 45677 | Nero | 1× |
| Plate Round Corner 3 x 3 | 30357 | Nero | 4× |
| Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | 56145 | Nero | 10× |
| Bar 1 x 4 x 3 [End Tabs] | 62113 | Nero | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Nero | 3× |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 85080 | Nero | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Nero | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Nero | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Nero | 4× |
| Slope Curved 4 x 1 Inverted | 13547 | Nero | 6× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Nero | 2× |
| Brick Curved 6 x 1 Inverted | 42023 | Nero | 6× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Nero | 3× |
| Plate Round 4X4 with Ø16mm hole | 28620 | Nero | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Nero | 3× |
| Plate Round 6 x 6 with Hole | 11213 | Nero | 1× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Nero | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Nero | 1× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Nero | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Nero | 4× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Nero | 4× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Nero | 4× |
| Equipment Candlestick | 37762 | Nero | 2× |
| Tile Special 2 x 2 with Top Pin [Squared Holes] | 49153 | Nero | 6× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Nero | 2× |
| CHAIN 6 M | 39890 | Nero | 2× |
| FLAT TILE 1X2, NO. 308 | 73893 | Nero | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Nero | 8× |
| FRAME 1X2X2 | 79128 | Nero | 1× |
| Wedge Sloped 45° 3 x 3 Left | 42862 | Nero | 1× |
| Wedge Sloped 45° 3 x 3 Right | 48165 | Nero | 1× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Nero | 1× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Nero | 8× |
| Equipment Cleaver, 2 Holes | 79811 | Nero | 2× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Nero | 6× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Nero | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Nero | 2× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Nero | 2× |
| Plate 3 x 3 Corner | 77844 | Nero | 4× |
| BRICK 4X6, W/ 4.85 HOLE, CUT OUT | 1679 | Nero | 1× |
| Slope Inverted 45° 6 x 8 Double with Pin Holes on Sides | 5117 | Nero | 2× |
| Wedge Sloped 2 x 5 Right | 3505 | Nero | 1× |
| Wedge Sloped 2 x 5 Left | 3504 | Nero | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Nero | 1× |
| Tyre 49.53 x 20 | 15413 | Nero | 10× |
| LEFT SHELL 2X10X2, OUTSIDE BOW, W/ CUT | 4581 | Nero | 1× |
| RIGHT SHELL 2X10X2, OUTSIDE BOW, W/ CUT | 4308 | Nero | 1× |
| Slope 45° 2 x 4 with 2/3 Inverted Cutout and no Studs | 5540 | Nero | 3× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Nero | 4× |
| Slope 1 x 4 with 1 x 2 Cutout | 5654 | Nero | 2× |
| Slope 30° 1 x 4 x 2/3 | 7835 | Grigio bluastro scuro | 1× |
| Technic Beam 1 x 5 Thick | 32316 | Nero | 2× |
| Technic Axle Connector Double Flexible [Rubber] | 45590 | Nero | 1× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Nero | 2× |
| STEERING GEAR, 9 MODULE | 35257 | Nero | 2× |
| BEAM 3M Ø4.85 W. FORK | 49137 | Nero | 1× |
| CROSS BLOCK/FORM 2X2X2 | 42193 | Nero | 1× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Nero | 24× |
| TECHNIC CROSS BLOCK 2X1 | 42163 | Nero | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Nero | 2× |
| Technic Beam 2 x 3 L-Shape with Quarter Ellipse Thick | 71708 | Nero | 2× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 44874 | Nero | 2× |
| Fric. element, cylinder | 65443 | Nero | 3× |
| Flexible Ribbed Hose 8mm Ends 10L | 27328 | Nero | 2× |
| BRICK 1X2X2 | 3245 | Beige | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Beige | 2× |
| Plate 3 x 3 | 11212 | Beige | 4× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Beige | 1× |
| Brick 2 x 2 | 3003 | Viola scuro | 6× |
| Brick 1 x 2 | 3004 | Viola scuro | 3× |
| Brick 1 x 1 | 3005 | Trans-blu scuro | 16× |
| Brick 1 x 6 | 3009 | Blu scuro | 8× |
| Brick 1 x 4 | 3010 | Viola scuro | 3× |
| Slope Inverted 45° 2 x 1 | 3665 | Blu scuro | 4× |
| Brick 2 x 2 Corner | 2357 | Viola scuro | 16× |
| FRAME 1X4X6 | 40289 | Dark Blue-Violet | 1× |
| BRICK 1X2 W. HORIZONTAL HOLDER | 42925 | Dark Blue-Violet | 5× |
| Panel 1 x 6 x 5 | 59349 | Blu scuro | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Nero | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Nero | 9× |
| ELEMENT SEPARATOR | 31510 | Arancione | 1× |
| CARROT | 3342 | Arancione | 1× |
| Brick 2 x 4 | 3001 | Rosso | 1× |
| Brick 2 x 2 | 3003 | Rosso | 1× |
| Plate 2 x 2 | 3022 | Rosso | 2× |
| Plate 1 x 1 | 3024 | Rosso | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Rosso | 3× |
| Plate 1 x 4 | 3710 | Rosso | 6× |
| Plate Special 1 x 2 with Door Rail | 32028 | Rosso | 9× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Rosso | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Rosso | 1× |
| Plate Round Corners 2 x 6 Double | 18980 | Rosso | 1× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Rosso | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Rosso | 2× |
| PLATE 1X2 W. VERTICAL SCHAFT | 43876 | Rosso | 1× |
| PLATE 1X2 W. 1 HORIZONTAL SNAP | 65458 | Rosso | 2× |
| Tile 2 x 6 | 69729 | Rosso | 1× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Rosso | 6× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Rosso | 2× |
| MINI HAT NO. 14 WITH HAIR | 90809 | Rosso | 1× |
| Technic Axle 2 Notched | 32062 | Rosso | 7× |
| Technic Axle 4 | 3705 | Rosso | 3× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Rosso | 2× |
| TECHNIC ANG. BEAM 4X2 90 DEG | 42137 | Rosso | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rosso | 4× |
| Technic Pin 1/2 with Friction | 89678 | Rosso | 22× |
| Equipment Cup / Mug [Plain] | 3899 | Giallo | 1× |
| Plant, Banana | 33085 | Giallo | 1× |
| MINI HEAD, NO. 2463 | 36346 | Giallo | 1× |
| MINI HEAD, NO. 3361 | 73906 | Giallo | 1× |
| MINI HEAD, NO. 2589 | 38300 | Giallo | 1× |
| Brick 1 x 4 | 3010 | Lime | 3× |
| Brick Special 1 x 1 with Headlight | 4070 | Lime | 2× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Nero | 1× |
| Plant, Plate 1 x 1 Round with 3 Leaves | 32607 | Grigio bluastro chiaro | 1× |
| Radiator Grille 1x2 | 2412 | Grigio bluastro scuro | 3× |
| Brick Special 1 x 2 with Grille | 2877 | Grigio bluastro scuro | 2× |
| Plate 2 x 10 | 3832 | Grigio bluastro scuro | 3× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Grigio bluastro scuro | 2× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Grigio bluastro scuro | 2× |
| Plate 2 x 6 | 3795 | Grigio bluastro scuro | 5× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Grigio bluastro scuro | 1× |
| Tile Special 1 x 2 with Handle | 2432 | Grigio bluastro scuro | 6× |
| PLATE 2X2 ROUND | 4032 | Grigio bluastro scuro | 10× |
| Plate 2 x 3 | 3021 | Grigio bluastro scuro | 3× |
| Tile 1 x 4 with Groove | 2431 | Grigio bluastro scuro | 3× |
| Plate 1 x 6 | 3666 | Grigio bluastro scuro | 2× |
| Brick 2 x 4 | 3001 | Grigio bluastro scuro | 6× |
| Slope Inverted 45° 2 x 1 | 3665 | Grigio bluastro scuro | 2× |
| Brick 1 x 1 | 3005 | Grigio bluastro scuro | 2× |
| Brick 1 x 8 | 3008 | Grigio bluastro scuro | 2× |
| Plate 4 x 10 | 3030 | Grigio bluastro scuro | 2× |
| Plate 1 x 3 | 3623 | Grigio bluastro scuro | 8× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Grigio bluastro scuro | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Grigio bluastro scuro | 2× |
| Plate 1 x 10 | 4477 | Grigio bluastro scuro | 2× |
| Tool Jackhammer / Motor Hammer | 30228 | Grigio bluastro scuro | 1× |
| Tile 2 x 4 with Groove | 87079 | Grigio bluastro scuro | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Grigio bluastro scuro | 1× |
| Wedge 2 x 2 Facet | 87620 | Grigio bluastro scuro | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Grigio bluastro scuro | 2× |
| Slope Curved 4 x 2 No Studs | 93606 | Grigio bluastro scuro | 3× |
| Plate 3 x 3 | 11212 | Grigio bluastro scuro | 6× |
| Tile Round 2 x 2 with Hole | 15535 | Grigio bluastro scuro | 10× |
| FLAT TILE 2X2 ROUND W/ HOLE Ø4.85 NO. 1 | 21605 | Grigio bluastro scuro | 1× |
| PLATE 2X2 W 1 KNOB | 23893 | Grigio bluastro scuro | 3× |
| Tile 6 x 6 with Bottom Tubes | 10202 | Grigio bluastro scuro | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Grigio bluastro scuro | 10× |
| Hinge Brick 1 x 2 Top Plate Thin | 3938 | Grigio bluastro scuro | 6× |
| Slope Curved 4 x 1 Inverted | 13547 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Grigio bluastro scuro | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Grigio bluastro scuro | 3× |
| PLATE 1X2 W. VERTICAL SCHAFT | 43876 | Grigio bluastro scuro | 1× |
| PLATE 1X2 W/STUB VERTICAL/END | 49715 | Grigio bluastro scuro | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Grigio bluastro scuro | 2× |
| WALL DOUBLE CORNER 1X2X1 | 35391 | Grigio bluastro scuro | 8× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Grigio bluastro scuro | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Grigio bluastro scuro | 4× |
| SHAFT 3M Ø3.2 | 17715 | Grigio bluastro scuro | 4× |
| Tile 2 x 6 | 69729 | Grigio bluastro scuro | 2× |
| Tile Special 2 x 3 with 2 Clips without Tab between Clips | 65886 | Grigio bluastro scuro | 4× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Grigio bluastro scuro | 4× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Grigio bluastro scuro | 1× |
| Plate Round Corners 2 x 6 Double | 18980 | Grigio bluastro scuro | 2× |
| Slope Curved 2 x 2 with Lip, No Studs | 30602 | Grigio bluastro scuro | 4× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Grigio bluastro scuro | 2× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Grigio bluastro scuro | 1× |
| MINI LOWER PART, NO. 2676 | 107562 | Grigio bluastro scuro | 3× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Grigio bluastro scuro | 1× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Grigio bluastro scuro | 2× |
| Technic Axle 8 with Stop | 55013 | Grigio bluastro scuro | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Grigio bluastro scuro | 6× |
| Technic Axle 4 with Stop | 87083 | Grigio bluastro scuro | 13× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Grigio bluastro scuro | 2× |
| ANGLE ELEMENT, 0 DEGREES [1] | 42127 | Grigio bluastro scuro | 2× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Grigio bluastro scuro | 1× |
| Tile 2 x 4 with Groove | 87079 | Nero | 2× |
| Brick 1 x 4 | 3010 | Nero | 2× |
| Plate 2 x 2 | 3022 | Nero | 3× |
| Plate 1 x 4 | 3710 | Nero | 16× |
| FLAT TILE 2X2 | 3068 | Nero | 2× |
| Slope 45? 2 x 2 | 3039 | Nero | 2× |
| ROOF TILE 1X2/45° | 3040 | Nero | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 2× |
| Plate 1 x 2 | 3023 | Nero | 6× |
| Brick 1 x 1 | 3005 | Nero | 4× |
| Tile 1 x 4 with Groove | 2431 | Nero | 5× |
| Plate 1 x 1 | 3024 | Nero | 6× |
| Plate 1 x 3 | 3623 | Nero | 2× |
| Plate 2 x 6 | 3795 | Nero | 3× |
| Plate 2 x 4 | 3020 | Nero | 4× |
| Plate 2 x 2 Corner | 2420 | Nero | 2× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Nero | 2× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Nero | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Nero | 1× |
| Wedge Plate 2 x 2 Left | 24299 | Nero | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Nero | 2× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Nero | 2× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Nero | 2× |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Nero | 4× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Nero | 2× |
| Tile 1 x 8 with Groove | 4162 | Nero | 4× |
| Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs | 45677 | Nero | 2× |
| Slope Curved 8 x 2 No Studs | 42918 | Nero | 1× |
| Slope 33° 2 x 2 Double / Inverted | 1762 | Nero | 4× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Nero | 4× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Nero | 4× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Nero | 6× |
| Slope 45° 2 x 4 with 2/3 Inverted Cutout and no Studs | 5540 | Nero | 4× |
| Door 1 x 3 x 1 Right | 3821 | Nero | 1× |
| Door 1 x 3 x 1 Left | 3822 | Nero | 1× |
| FLAT TILE 2X2, NO. 820 | 116665 | Nero | 6× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Nero | 2× |
| MINI UPPER PART, NO. 6870 | 76382 | Grigio bluastro scuro | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 2× |
| Brick 1 x 6 | 3009 | Nero | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Nero | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 1× |
| BRICK 1X2X2 | 3245 | Medium Azur | 2× |
| Cupboard 2 x 3 x 5 | 2656 | Arancione | 1× |
| FLAT TILE 1X2, NO. 502 | 115971 | Medium Azur | 2× |
| FLAT TILE 1X1, ROUND NO. 56 | 26819 | Pearl Very Light Gray | 1× |
| Plate 1 x 6 | 3666 | Grigio bluastro chiaro | 2× |
| Plate 2 x 6 | 3795 | Grigio bluastro chiaro | 1× |
| FLAT TILE 1X4, NO. 156 | 73797 | Pearl Very Light Gray | 2× |
| Brick 2 x 4 | 3001 | Grigio bluastro chiaro | 1× |
| Plate 2 x 4 | 3020 | Grigio bluastro chiaro | 5× |
| Plate 1 x 2 | 3023 | Grigio bluastro chiaro | 8× |
| Plate 4 x 12 | 3029 | Grigio bluastro chiaro | 2× |
| Plate 4 x 8 | 3035 | Grigio bluastro chiaro | 2× |
| FLAT TILE 1X2 | 3069 | Grigio bluastro chiaro | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Grigio bluastro chiaro | 5× |
| Plate 1 x 8 | 3460 | Grigio bluastro chiaro | 4× |
| Plate 1 x 4 | 3710 | Grigio bluastro chiaro | 3× |
| Plate 2 x 6 | 3795 | Grigio bluastro chiaro | 2× |
| Hinge Brick 1 x 4 [Lower] | 3831 | Grigio bluastro chiaro | 2× |
| Plate 2 x 10 | 3832 | Grigio bluastro chiaro | 4× |
| Plate 2 x 16 | 4282 | Grigio bluastro chiaro | 1× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Grigio bluastro chiaro | 10× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Grigio bluastro chiaro | 4× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Grigio bluastro chiaro | 2× |
| CONSOLE W. WHEEL GREY/BLACK | 73081 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Grigio bluastro chiaro | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Grigio bluastro chiaro | 7× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Grigio bluastro chiaro | 1× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Grigio bluastro chiaro | 1× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Grigio bluastro chiaro | 2× |
| PLATE 2X2 W 1 KNOB | 23893 | Grigio bluastro chiaro | 2× |
| Window 1 x 4 x 3 without Shutter Tabs | 60594 | Grigio bluastro chiaro | 1× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Grigio bluastro chiaro | 4× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Grigio bluastro chiaro | 6× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Grigio bluastro chiaro | 2× |
| FRAME 1X4X6 | 40289 | Grigio bluastro chiaro | 1× |
| PLATE 1X2 W/STUB/ALONG/UPPER P | 53922 | Grigio bluastro chiaro | 2× |
| PLATE 1X4 W. BALL SOCKET | 49422 | Grigio bluastro chiaro | 1× |
| Tile Special 2 x 2 with Top Pin [Squared Holes] | 49153 | Grigio bluastro chiaro | 4× |
| BRICK 1X1 W/ HOLDER, VERTICAL | 65459 | Grigio bluastro chiaro | 1× |
| HINGE 1X2 UPPER PART | 65122 | Grigio bluastro chiaro | 2× |
| FLAT TILE 1X1, NO. 234 | 73777 | Grigio bluastro chiaro | 1× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Grigio bluastro chiaro | 1× |
| BRICK 2X2 ROUND W/ HOLE Ø4,85 | 79566 | Grigio bluastro chiaro | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Grigio bluastro chiaro | 12× |
| FRAME 1X2X3 | 3662 | Grigio bluastro chiaro | 2× |
| Technic Pin 1/2 | 4274 | Grigio bluastro chiaro | 4× |
| BUSH FOR CROSS AXLE | 42798 | Grigio bluastro chiaro | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Grigio bluastro chiaro | 4× |
| TOOTHED BAR M=1, Z=10 | 4296 | Grigio bluastro chiaro | 2× |
| Technic Pin Connector Hub with 3L Axle | 5713 | Grigio bluastro chiaro | 2× |
| HELMET, NO. 68 | 18899 | Nero | 1× |
| Equipment Brush / Push Broom | 3836 | Marrone rossastro | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Nero | 2× |
| Plate 2 x 3 | 3021 | Nero | 1× |
| Plate 1 x 4 | 3710 | Nero | 2× |
| Brick 2 x 2 | 3003 | Nero | 1× |
| Tile Special 1 x 2 with Handle | 2432 | Nero | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Nero | 4× |
| Plate 2 x 2 | 3022 | Nero | 2× |
| Plate 1 x 6 | 3666 | Nero | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Nero | 1× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Nero | 3× |
| PLATE 1x2 W. HORIZONTAL HOLE Ø4,85 REV. | 28809 | Marrone rossastro | 4× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Nero | 1× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Marrone rossastro | 2× |
| 1X1 DECORATION TOP, NO. 2 | 3441 | Marrone rossastro | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Nero | 3× |
| Technic Pin Connector 3L with 2 Pins and Center Hole [Pin Ridges Across Part] | 46189 | Nero | 2× |
| MINI UPPER PART, NO. 6870 | 76382 | Grigio bluastro scuro | 1× |
| MINI UPPER PART, NO. 6870 | 76382 | Grigio bluastro scuro | 1× |
| Wedge 2 x 2 Facet | 87620 | Beige scuro | 4× |
| Plate 2 x 3 | 3021 | Beige scuro | 5× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Beige scuro | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Beige scuro | 2× |
| Plate Special 4 x 6 with Studs on 3 Edges | 6180 | Beige scuro | 1× |
| ROCK 4X4X1 2/3 LOWER PART | 42291 | Beige scuro | 2× |
| ROCK 4X4X1 1/3 UPPER PART | 42284 | Beige scuro | 2× |
| CROSS AXLE 4.5 MODULE, W/ STOP 1 MODULE | 7784 | Beige scuro | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Nero | 3× |
| Tool Screwdriver and Spanner / Wrench | 4006 | Nero | 1× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Silver Metallic | 2× |
| ROOF TILE 1X1X2/3 | 35338 | Trans-trasparente | 4× |
| WINDSCREEN 2X4X2 | 35160 | Trans-trasparente | 2× |
| Door 3 x 5 | 2657 | Trans-trasparente | 1× |
| WINDSCREEN 4X3X3, W/ SHARP EDGE | 35193 | Trans-trasparente | 1× |
| WALL ELEMENT 1X2X1 | 35293 | Trans-trasparente | 2× |
| GLASS FOR FRAME 1X4X3 | 35318 | Trans-trasparente | 1× |
| FLAT TILE 1X1, ROUND | 35380 | Trans-trasparente | 6× |
| Brick 1x1 w/ Studs on 2 Sides | 35382 | Trans-trasparente | 2× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Trans-trasparente | 2× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Trans-trasparente | 2× |
| GLASS FOR FRAME 1X2X3 | 35287 | Trans-trasparente | 2× |
| WINDSCREEN 2X4X2 | 35260 | Trans-trasparente | 1× |
| DIAMOND WITH STICK | 28556 | Nero | 1× |
| Dome 1 x 1 x 2/3 | 6908 | Nero | 2× |
| ROCK CRYSTAL, TRANSPARENT | 28623 | Trans-viola | 2× |
| ROUND BRICK 1X1 | 35390 | Trans-verde neon | 1× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Trans-trasparente | 1× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Trans-trasparente | 1× |
| PLATE 1X2 | 28653 | Trans-azzurro | 7× |
| FLAT TILE 1X1, ROUND | 35380 | Trans-azzurro | 2× |
| TAP Ø4.9/6.4 | 4599 | Medium Lime | 1× |
| Brick 2 x 4 | 3001 | Bianco | 1× |
| Plate 2 x 2 | 3022 | Bianco | 1× |
| Plate 1 x 2 | 3023 | Bianco | 9× |
| FLAT TILE 1X1 | 3070 | Bianco | 2× |
| Plate 1 x 6 | 3666 | Bianco | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Bianco | 3× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Bianco | 1× |
| Plate Special 1 x 2 with Door Rail | 32028 | Bianco | 2× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Bianco | 3× |
| Brick Round 2 x 2 Dome Bottom [Open Stud] | 15395 | Bianco | 1× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Bianco | 2× |
| FLAT TILE 2X2, NO. 364 | 37475 | Bianco | 1× |
| GLASS DOOR FÜR FRAME 1X4X6 | 35291 | Bianco | 1× |
| PLATE 2X2 ANGLE | 35262 | Bianco | 4× |
| FLAT TILE 2X2, ROUND, NO. 1172 | 73806 | Bianco | 1× |
| FLAT TILE 1X2, NO. 376 | 103172 | Bianco | 1× |
| FLAT TILE 2X2, NO. 715 | 107567 | Bianco | 2× |
| FLAT TILE 1X1, NO. 315 | 109405 | Bianco | 8× |
| KITCHEN EQUIPMENT, NO. 9 | 3576 | Bianco | 1× |
| 1/2 BUSH | 42136 | Bianco | 16× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Bianco | 2× |
| Technic Panel Fairing 2 x 1 x 1 | 89679 | Bianco | 1× |
DNA della build
Dettagli inventario pezzi per Dump Truck & Front End Loader
Con 1131 pezzi, questa build e +271% rispetto al set City medio e +80% rispetto alla media dei set del 2026.
Rispetto al set City medio
Set City medio: 305 pezzi su 739 altri set.
Rispetto al set medio del 2026
Set medio del 2026: 628 pezzi su 423 altri set.
Profilo colori
Colore dominante
Nero
Pezzi unici
4 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Plate 1 x 4
27xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.









