Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Grigio bluastro scuro | 12× |
![]() Bar Holder with Clip 11090 | Grigio bluastro scuro | 2× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Nero | 10× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Grigio bluastro chiaro | 2× |
![]() Plate 3 x 3 11212 | Grigio bluastro chiaro | 2× |
![]() Slope Curved 2 x 1 No Studs [1/2 Bow] 11477 | Grigio bluastro scuro | 4× |
![]() Slope Curved 2 x 1 No Studs [1/2 Bow] 11477 | Nero | 18× |
![]() Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs] 13349 | Grigio bluastro scuro | 2× |
![]() Brick Curved 10 x 1 [Symmetric Inside Ridges] 13731 | Nero | 4× |
![]() Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring 13971 | Rosso | 2× |
Visualizzati 10 di 294 pezzi
🔓 Registrati per vedere tutti i pezzi| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Grigio bluastro scuro | 4× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Nero | 18× |
| Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs] | 13349 | Grigio bluastro scuro | 2× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Nero | 4× |
| Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring | 13971 | Rosso | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Giallo | 3× |
| Tile Round 2 x 2 with Bottom Stud Holder with Red Circles Print | 14769pr1079 | Bianco | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Nero | 5× |
| Projectile, Spring Shooter Ammunition 8L Bar | 15303 | Trans-Neon Orange | 3× |
| Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | 15400 | Grigio bluastro scuro | 2× |
| Plate Special 2 x 2 with Towball and Hole | 15456 | Nero | 1× |
| Tile Round 2 x 2 with Hole | 15535 | Grigio bluastro scuro | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Rosso | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Beige | 8× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Grigio bluastro scuro | 2× |
| Launcher, Brick Special 1 x 4 with Inside Clips (Disk Shooter) with Recessed Center 2 Studs | 16968 | Grigio bluastro chiaro | 2× |
| Brick Round 2 x 2, Pin Holes with 6 Black Diamonds Print | 17485pr0002 | Rosso | 1× |
| Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 18575 | Nero | 2× |
| Launcher Trigger, Weapon Rapid Shooter, Flat Axle Hole | 18587 | Grigio bluastro chiaro | 1× |
| Launcher, Weapon Rapid Shooter Six Barrel, 3 Fingers | 18588 | Nero | 1× |
| Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 18653 | Nero | 2× |
| Bracket 3 x 2 x 1 1/3 with Pin Bottom | 18671 | Grigio bluastro scuro | 2× |
| Technic Turntable Large Type 3 Top, 60 Tooth | 18938 | Nero | 2× |
| Technic Turntable Large Type 3 Base | 18939 | Grigio bluastro chiaro | 2× |
| Windscreen 8 x 4 x 2 with Handle and 2 Studs with Black Cockpit Window Frames | 21849pr0003 | Trans-giallo | 1× |
| Tile Special 2 x 3 Pentagonal | 22385 | Nero | 14× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Grigio bluastro chiaro | 4× |
| Slope Inverted 45° 6 x 2 Double with 2 x 4 Cutout | 22889 | Nero | 1× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Grigio bluastro scuro | 6× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Nero | 4× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Rosso | 2× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Grigio bluastro chiaro | 10× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Marrone rossastro | 2× |
| Wedge Plate 3 x 6 Cut Corners | 2419 | Grigio bluastro scuro | 9× |
| Plate 2 x 2 Corner | 2420 | Grigio bluastro chiaro | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Grigio bluastro chiaro | 6× |
| Wedge Plate 2 x 2 Left | 24299 | Nero | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Nero | 1× |
| Tile 1 x 4 with Groove | 2431 | Grigio bluastro scuro | 2× |
| Tile 1 x 4 with Groove | 2431 | Nero | 6× |
| Slope Inverted 75° 2 x 1 x 3 | 2449 | Nero | 2× |
| Tile Special 2 x 2 with Top Pin | 2460 | Grigio bluastro scuro | 2× |
| Brick Special 1 x 4 with Groove | 2653 | Nero | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-giallo | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Bianco | 1× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-arancione | 3× |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | 2780 | Nero | 17× |
| Brick Special 1 x 2 with Grille | 2877 | Grigio bluastro scuro | 12× |
| Lever Small Base with Black Lever | 298c02 | Grigio bluastro chiaro | 2× |
| Lever Small Base with Black Lever | 298c02 | Bianco | 1× |
| Brick 2 x 4 | 3001 | Nero | 4× |
| Brick 2 x 4 | 3001 | Nero | 4× |
| Brick 2 x 4 | 3001 | Bianco | 2× |
| Brick 2 x 3 | 3002 | Nero | 3× |
| Brick 2 x 2 | 3003 | Nero | 2× |
| Handlebars | 30031 | Grigio bluastro scuro | 1× |
| Brick 1 x 2 | 3004 | Nero | 6× |
| Brick 1 x 2 | 3004 | Rosso | 2× |
| Brick 1 x 2 | 3004 | Grigio bluastro chiaro | 2× |
| Brick 1 x 2 | 3004 | Nero | 4× |
| Brick 1 x 1 | 3005 | Nero | 6× |
| Brick 1 x 1 | 3005 | Trans-arancione | 4× |
| Brick 1 x 1 | 3005 | Grigio bluastro chiaro | 6× |
| Brick 2 x 8 | 3007 | Grigio bluastro chiaro | 1× |
| Brick 1 x 8 | 3008 | Grigio bluastro scuro | 2× |
| Brick 1 x 6 | 3009 | Nero | 3× |
| Brick 1 x 4 | 3010 | Grigio bluastro scuro | 1× |
| Plate 2 x 4 | 3020 | Nero | 1× |
| Plate 2 x 4 | 3020 | Grigio bluastro scuro | 7× |
| Plate 2 x 4 | 3020 | Nero | 7× |
| Plate 2 x 3 | 3021 | Marrone rossastro | 3× |
| Plate 2 x 3 | 3021 | Nero | 3× |
| Plate 2 x 3 | 3021 | Grigio bluastro scuro | 8× |
| Plate 2 x 3 | 3021 | Grigio bluastro chiaro | 2× |
| Plate 2 x 2 | 3022 | Grigio bluastro chiaro | 3× |
| Plate 2 x 2 | 3022 | Marrone rossastro | 1× |
| Plate 2 x 2 | 3022 | Bianco | 2× |
| Plate 2 x 2 | 3022 | Nero | 3× |
| Plate 2 x 2 | 3022 | Nero | 4× |
| Plate 1 x 2 | 3023 | Nero | 22× |
| Plate 1 x 2 | 3023 | Trans-rosso | 1× |
| Plate 1 x 2 | 3023 | Grigio bluastro chiaro | 4× |
| Plate 1 x 2 | 3023 | Marrone rossastro | 6× |
| Brick Special 1 x 2 with Handle | 30236 | Nero | 1× |
| Plate 1 x 1 | 3024 | Rosso | 6× |
| Plate 1 x 1 | 3024 | Grigio bluastro scuro | 4× |
| Plate 1 x 1 | 3024 | Nero | 22× |
| Plate 4 x 10 | 3030 | Nero | 2× |
| Plate 4 x 4 | 3031 | Grigio bluastro scuro | 1× |
| Plate 4 x 4 | 3031 | Nero | 2× |
| Plate 4 x 6 | 3032 | Nero | 4× |
| Plate 2 x 8 | 3034 | Nero | 1× |
| Plate 4 x 8 | 3035 | Grigio bluastro scuro | 2× |
| Plate 4 x 8 | 3035 | Grigio bluastro chiaro | 1× |
| Plate 4 x 8 | 3035 | Nero | 2× |
| Wedge Plate 6 x 12 Left | 30355 | Nero | 1× |
| Wedge Plate 6 x 12 Right | 30356 | Nero | 1× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Grigio bluastro chiaro | 2× |
| Arm Mechanical with 2 Clips [Battle Droid] | 30377 | Grigio bluastro scuro | 4× |
| Slope 45° 2 x 3 | 3038 | Nero | 4× |
| Slope 45? 2 x 2 | 3039 | Nero | 2× |
| Slope 45? 2 x 2 | 3039 | Marrone rossastro | 1× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Grigio bluastro scuro | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Nero | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Grigio bluastro chiaro | 1× |
| Slope 45° 2 x 2 Double Convex | 3045 | Nero | 2× |
| Slope 45° 2 x 2 Double Concave | 3046a | Nero | 2× |
| Wedge Plate 8 x 8 Cut Corner | 30504 | Nero | 2× |
| Tile 2 x 2 with Groove | 3068b | Grigio bluastro scuro | 2× |
| Tile 1 x 2 with Groove | 3069b | Grigio bluastro scuro | 5× |
| Tile 1 x 2 with Groove | 3069b | Nero | 4× |
| Tile 1 x 2 with Groove | 3069b | Rosso | 5× |
| Tile 1 x 1 with Groove | 3070b | Nero | 4× |
| Tile 1 x 1 with Groove | 3070b | Grigio bluastro scuro | 8× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Grigio bluastro scuro | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Giallo | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Bianco | 4× |
| Plate Special 1 x 2 with Door Rail | 32028 | Grigio bluastro scuro | 4× |
| Plate Special 1 x 2 with Door Rail | 32028 | Rosso | 4× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Rosso | 8× |
| Technic Axle 2 Notched | 32062 | Rosso | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Rosso | 2× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Grigio bluastro chiaro | 2× |
| Technic Pin Double with Axle Hole | 32138 | Grigio bluastro chiaro | 1× |
| Technic Driving Ring Extension, 4 Ridges | 32187 | Grigio bluastro chiaro | 2× |
| Technic Ball Joint | 32474 | Grigio bluastro chiaro | 2× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Grigio bluastro chiaro | 3× |
| Slope 33° 3 x 2 | 3298 | Grigio bluastro scuro | 1× |
| Sticker Sheet for Set 70916-1 | 33908 | Unknown | 1× |
| Plate 1 x 8 | 3460 | Nero | 2× |
| Plate 1 x 8 | 3460 | Rosso | 4× |
| Plate 1 x 8 | 3460 | Nero | 4× |
| Brick 1 x 3 | 3622 | Grigio bluastro scuro | 2× |
| Brick 1 x 3 | 3622 | Nero | 2× |
| Plate 1 x 3 | 3623 | Giallo | 6× |
| Plate 1 x 3 | 3623 | Nero | 20× |
| Slope Inverted 45° 2 x 1 | 3665 | Bianco | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Giallo | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Nero | 8× |
| Plate 1 x 6 | 3666 | Grigio bluastro chiaro | 7× |
| Plate 1 x 6 | 3666 | Nero | 16× |
| Slope 33° 3 x 3 Double Convex | 3675 | Nero | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Nero | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Rosso | 3× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Grigio bluastro chiaro | 1× |
| Technic Axle 4 | 3705 | Rosso | 1× |
| Technic Axle 8 | 3707 | Rosso | 1× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Bianco | 1× |
| Plate 1 x 4 | 3710 | Nero | 14× |
| Plate 1 x 4 | 3710 | Giallo | 2× |
| Plate 1 x 4 | 3710 | Rosso | 4× |
| Plate 1 x 4 | 3710 | Nero | 2× |
| Plate 1 x 4 | 3710 | Grigio bluastro scuro | 3× |
| Technic Plate 2 x 8 [7 Holes] | 3738 | Grigio bluastro chiaro | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove (Jumper) | 3794b | Beige | 2× |
| Plate 2 x 6 | 3795 | Nero | 4× |
| Plate 2 x 6 | 3795 | Bianco | 1× |
| Plate 2 x 6 | 3795 | Rosso | 1× |
| Plate 2 x 10 | 3832 | Nero | 1× |
| Plate 6 x 6 | 3958 | Nero | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Nero | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Giallo | 1× |
| Brick Special 1 x 1 with Headlight | 4070 | Grigio bluastro chiaro | 4× |
| Brick Special 1 x 1 with Headlight | 4070 | Grigio bluastro scuro | 4× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Rosso | 2× |
| Tile 1 x 8 with Groove | 4162 | Grigio bluastro scuro | 2× |
| Technic Beam 1 x 2 Thin | 41677 | Grigio bluastro scuro | 2× |
| Wedge Curved 6 x 2 Right, Inner Ridges | 41747 | Nero | 1× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Nero | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Nero | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Nero | 1× |
| Technic Wedge Belt Wheel [aka Pulley] | 4185 | Grigio bluastro scuro | 4× |
| Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings | 41854 | Nero | 1× |
| Brick Curved 6 x 1 Inverted | 42023 | Grigio bluastro scuro | 2× |
| Wedge Curved 12 x 3 Right | 42060 | Nero | 1× |
| Wedge Curved 12 x 3 Left | 42061 | Nero | 1× |
| Technic Pin 1/2 | 4274 | Nero | 6× |
| Technic Pin 1/2 | 4274 | Grigio bluastro chiaro | 7× |
| Slope 33° 3 x 1 | 4286 | Nero | 1× |
| Slope 33° 3 x 1 | 4286 | Grigio bluastro scuro | 2× |
| Slope 33° 3 x 1 | 4286 | Rosso | 1× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Nero | 6× |
| Wedge Plate 3 x 2 Right | 43722 | Nero | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Grigio bluastro scuro | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Grigio bluastro scuro | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Nero | 1× |
| Technic Beam 1 x 2 Thick | 43857 | Grigio bluastro chiaro | 1× |
| Technic Rotation Joint Disk with Pin Hole and 3L Beam Thick | 44224 | Grigio bluastro scuro | 2× |
| Technic Rotation Joint Disk with Pin and 3L Beam Thick | 44225 | Grigio bluastro chiaro | 2× |
| Technic Axle 7 | 44294 | Grigio bluastro chiaro | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | 44301b | Grigio bluastro chiaro | 6× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth | 44302a | Grigio bluastro scuro | 6× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Grigio bluastro scuro | 6× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Grigio bluastro chiaro | 4× |
| Plate 1 x 10 | 4477 | Nero | 2× |
| Plate 1 x 10 | 4477 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 8 with Door Rail | 4510 | Rosso | 2× |
| Plate Special 2 x 2 with Wheel Holders | 4600 | Nero | 2× |
| Wheel 8 x 6 | 4624 | Grigio bluastro chiaro | 4× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Trans-viola | 2× |
| Cone 4 x 4 x 2 Hollow No Studs | 4742 | Grigio bluastro scuro | 2× |
| Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 47458 | Nero | 1× |
| Plate Special 2 x 2 with Wheels Holder Wide - Technic Pins | 47720 | Nero | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Grigio bluastro chiaro | 1× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Nero | 8× |
| Wedge Plate 8 x 3, 22° Right | 50304 | Nero | 1× |
| Wedge Plate 8 x 3, 22° Right | 50304 | Grigio bluastro scuro | 1× |
| Wedge Plate 8 x 3, 22° Left | 50305 | Grigio bluastro scuro | 1× |
| Wedge Plate 8 x 3, 22° Left | 50305 | Nero | 1× |
| Slope Curved 3 x 1 No Studs | 50950 | Nero | 2× |
| Wedge Curved 10 x 3 Left | 50955 | Nero | 1× |
| Wedge Curved 10 x 3 Right | 50956 | Nero | 1× |
| Wedge Plate 2 x 4 | 51739 | Grigio bluastro chiaro | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Rosso | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Trans-giallo | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 1× |
| Wedge Plate 6 x 3 Right | 54383 | Nero | 2× |
| Wedge Plate 6 x 3 Left | 54384 | Nero | 2× |
| Technic Axle 8 with Stop | 55013 | Grigio bluastro scuro | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Grigio bluastro chiaro | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Rosso | 3× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Nero | 4× |
| Tyre 14 x 4 Smooth Small Single [New Style] | 59895 | Nero | 4× |
| Cone 1 x 1 [Top Groove] | 59900 | Argento metallico | 4× |
| Slope Inverted 45° 6 x 4 Double with 4 x 4 Recessed and 3 Holes | 60219 | Nero | 5× |
| Slope 18° 4 x 1 | 60477 | Nero | 8× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Grigio bluastro chiaro | 2× |
| Plate 1 x 12 | 60479 | Nero | 2× |
| Window 1 x 4 x 3 without Shutter Tabs | 60594 | Grigio bluastro scuro | 1× |
| Wedge Plate 6 x 6 Cut Corner | 6106 | Nero | 8× |
| Brick 1 x 10 | 6111 | Nero | 2× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Grigio bluastro scuro | 12× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-giallo | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-arancione | 7× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rosso | 12× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Grigio bluastro scuro | 10× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Nero | 6× |
| Panel 1 x 1 x 1 Corner | 6231 | Nero | 8× |
| Technic Pin Connector Round [Slotted] | 62462 | Grigio bluastro chiaro | 2× |
| Tile 1 x 3 | 63864 | Grigio bluastro scuro | 8× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Grigio bluastro scuro | 2× |
| Bar 6L with Stop Ring | 63965 | Grigio bluastro chiaro | 2× |
| Bar 6L with Stop Ring | 63965 | Bianco | 1× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Giallo | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Rosso | 6× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Bianco | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Nero | 4× |
| Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | 6558 | Nero | 9× |
| Gearbox 4 x 4 x 1 2/3 with 1 x 2 Cutouts, Pin Holes | 6585 | Nero | 1× |
| Technic Gear 12 Tooth Bevel | 6589 | Beige | 2× |
| Tile 1 x 6 with Groove | 6636 | Grigio bluastro scuro | 4× |
| Plate Round 1 x 1 with Open Stud | 85861 | Grigio bluastro chiaro | 4× |
| Technic Pin Connector Double with Bar [2 Holes] | 85940 | Nero | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Marrone rossastro | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Grigio bluastro scuro | 9× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Nero | 5× |
| Tile 2 x 4 with Groove | 87079 | Marrone rossastro | 1× |
| Tile 2 x 4 with Groove | 87079 | Nero | 4× |
| Technic Axle 4 with Stop | 87083 | Grigio bluastro scuro | 1× |
| Technic Gear 20 Tooth Bevel with Pin Hole | 87407 | Grigio bluastro chiaro | 2× |
| Plate Special 3 x 4 with 1 x 4 Center Studs [Plain] | 88646 | Nero | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Nero | 1× |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 90194 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 2 [Top Clip] | 92280 | Grigio bluastro chiaro | 4× |
| Wedge Plate 10 x 10 Cut Corner [No Centre Studs] | 92584 | Nero | 2× |
| Plate Special 1 x 4 with 2 Studs | 92593 | Grigio bluastro chiaro | 1× |
| Plate Special 1 x 2 with Angled Handles on Side | 92692 | Bianco | 1× |
| Brick Round 2 x 2 [Grill] | 92947 | Nero | 2× |
| Brick Arch 1 x 6 Raised Arch | 92950 | Nero | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Nero | 3× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Grigio bluastro scuro | 2× |
| Brick and Axle Separator v2.0 | 96874 | Arancione | 1× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Grigio bluastro chiaro | 4× |
| Tile Round 1 x 1 | 98138 | Trans-viola | 2× |
| Tile Round 1 x 1 | 98138 | Trans-rosso | 8× |
| Tile Round 1 x 1 | 98138 | Trans-verde | 3× |
| Tile Round 1 x 1 | 98138 | Trans-giallo | 10× |
| Tile Round 1 x 1 | 98138 | Trans-trasparente | 4× |
| Hinge Plate 2 x 4 with Pin Hole with 3 Holes - Bottom | 98285 | Grigio bluastro chiaro | 1× |
| Hinge Plate 2 x 4 with Pin Hole - Top | 98286 | Grigio bluastro chiaro | 1× |
| Equipment Winder Key [Toy] | 98375 | Argento opaco | 1× |
| Weapon Batarang | 98721 | Nero | 1× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Nero | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Grigio bluastro chiaro | 18× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Nero | 13× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Grigio bluastro chiaro | 5× |
DNA della build
Dettagli inventario pezzi per The Batwing
Con 1053 pezzi, questa build e +42% rispetto al set Batman medio e +175% rispetto alla media dei set del 2017.
Rispetto al set Batman medio
Set Batman medio: 744 pezzi su 40 altri set.
Rispetto al set medio del 2017
Set medio del 2017: 383 pezzi su 450 altri set.
Profilo colori
Colore dominante
Nero
Pezzi unici
5 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Plate 1 x 2
33xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.



![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6047417.jpg)

![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037746.jpg)


![Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6029948.jpg)
![Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6047276.jpg)
![Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs]](https://cdn.rebrickable.com/media/parts/elements/6079036.jpg)
![Brick Curved 10 x 1 [Symmetric Inside Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037664.jpg)
