


Ricrea epiche battaglie dalla stagione 3 di NINJAGO® Dragons Rising con il Jet Mech di Lloyd (71845). Questo set da 1.112 pezzi include un potente mech con gambe e braccia snodabili, una cabina di pilotaggio e 2 grandi spade. Trasforma il mech in un elegante jet con cabina, ali e motori a reazione per i combattimenti aerei. Unisciti a Lloyd e Sora, armati di armi ninja, mentre affrontano i malvagi Kur, Tyr e un Guerriero Dragoniano Spettrale. I cattivi portano uno stendardo con un messaggio segreto, rivelabile dalla lama traslucida di Lloyd. Sora ha una moto volante, mentre i nemici comandano un drago spettro snodabile, combinabile con parti del Drago Artiglio Tonante del Caos (71832).
Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Sticker Sheet for Set 71845-1 10113526 | Unknown | 1× |
![]() Technic Pin Connector Hub with 2 Perpendicular Axles 10197 | Nero | 3× |
![]() Technic Pin Connector Hub with 2 Perpendicular Axles 10197 | Bianco | 2× |
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Grigio bluastro scuro | 4× |
![]() Bar Holder with Clip 11090 | Bianco | 8× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Blu scuro | 2× |
![]() Tile Special 2 x 2 Inverted 11203 | Nero | 6× |
![]() Tile Special 2 x 2 Inverted 11203 | Giallo chiaro brillante | 8× |
![]() Tile Special 2 x 2 Inverted 11203 | Grigio bluastro chiaro | 4× |
![]() Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle 11214 | Grigio bluastro scuro | 2× |
Visualizzati 10 di 360 pezzi
🔓 Registrati per vedere tutti i pezzi| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Blu scuro | 2× |
| Tile Special 2 x 2 Inverted | 11203 | Nero | 6× |
| Tile Special 2 x 2 Inverted | 11203 | Giallo chiaro brillante | 8× |
| Tile Special 2 x 2 Inverted | 11203 | Grigio bluastro chiaro | 4× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Nero | 1× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Grigio bluastro chiaro | 1× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Rosso | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Light Aqua | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Corallo | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Nero | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Grigio bluastro scuro | 3× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Grigio bluastro chiaro | 3× |
| Plate Special 1 x 2 with 5.9mm Towball Socket and Towball | 14419 | Grigio bluastro scuro | 1× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Grigio bluastro chiaro | 6× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Oro perlato | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Blu scuro | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Verde scuro | 7× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Grigio bluastro chiaro | 6× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Light Aqua | 1× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Bianco | 6× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Oro perlato | 3× |
| Tile Special 1 x 2 with Two Vertical Teeth / Tooth | 15209 | Bianco | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Bianco | 1× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Blu scuro | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Grigio bluastro chiaro | 8× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Giallo chiaro brillante | 10× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Nero | 1× |
| Plate Round 1 x 2 Half Circle with Stud (Jumper) | 1745 | Bianco | 1× |
| Tile Round 1 x 2 Half Circle | 1748 | Grigio bluastro scuro | 1× |
| Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts | 1750 | Grigio bluastro scuro | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Nero | 6× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Grigio bluastro chiaro | 1× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Grigio bluastro scuro | 4× |
| Technic Panel 5 x 11 x 1 Tapered | 18945 | Verde brillante | 2× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Nero | 2× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Argento opaco | 1× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Oro perlato | 2× |
| Tile Special 2 x 3 Pentagonal | 22385 | Blu scuro | 4× |
| Tile Special 2 x 3 Pentagonal | 22385 | Grigio bluastro chiaro | 2× |
| Tile Special 2 x 3 Pentagonal | 22385 | Grigio bluastro chiaro | 3× |
| Tile Special 2 x 3 Pentagonal | 22385 | Verde scuro | 8× |
| Tile Special 2 x 3 Pentagonal | 22385 | Oro perlato | 4× |
| Plate Special 1 x 2 with End Towball | 22890 | Grigio bluastro scuro | 2× |
| Technic Pin Connector Hub Perpendicular 3L with 2 Pins | 2393 | Nero | 2× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Nero | 6× |
| Plate 2 x 2 Corner | 2420 | Nero | 4× |
| Plate 2 x 2 Corner | 2420 | Grigio bluastro chiaro | 2× |
| Plate 2 x 2 Corner | 2420 | Grigio bluastro scuro | 4× |
| Slope Curved 2 x 1 Inverted | 24201 | Light Aqua | 2× |
| Tile Round 1 x 1 Half Circle | 24246 | Blu scuro | 1× |
| Wedge Plate 2 x 2 Left | 24299 | Grigio bluastro chiaro | 1× |
| Wedge Plate 2 x 2 Left | 24299 | Bianco | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Grigio bluastro chiaro | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Bianco | 1× |
| Slope Curved 3 x 2 No Studs | 24309 | Light Aqua | 1× |
| Technic Axle 3 with Stop | 24316 | Marrone rossastro | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Verde scuro | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Nero | 4× |
| Tile Round 1 x 1 Quarter | 25269 | Giallo chiaro brillante | 6× |
| Tile Round 1 x 1 Quarter | 25269 | Light Aqua | 9× |
| Tile Round 1 x 1 Quarter | 25269 | Grigio bluastro chiaro | 12× |
| Tile Round 1 x 1 Quarter | 25269 | Verde scuro | 2× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Bianco | 4× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Oro perlato | 2× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Nero | 4× |
| Plate 4 x 4 Corner | 2639 | Grigio bluastro scuro | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Grigio bluastro chiaro | 2× |
| Tile 2 x 3 | 26603 | Rosso | 1× |
| Tile 2 x 3 | 26603 | Grigio bluastro scuro | 1× |
| Tile 2 x 3 | 26603 | Grigio bluastro chiaro | 2× |
| Windscreen 6 x 4 x 1 Hexagonal with Handle | 27262 | Verde scuro | 1× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Grigio bluastro chiaro | 4× |
| Technic Axle Towball | 2736 | Grigio bluastro chiaro | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Blu scuro | 2× |
| Wheel Arch, Mudguard 3 x 4 with 2 x 2 Plate | 28326 | Giallo chiaro brillante | 2× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Nero | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Grigio bluastro chiaro | 7× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Nero | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Grigio bluastro chiaro | 7× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Nero | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Grigio bluastro scuro | 6× |
| Plate 2 x 4 | 3020 | Verde scuro | 4× |
| Plate 2 x 4 | 3020 | Light Aqua | 3× |
| Plate 2 x 4 | 3020 | Blu scuro | 2× |
| Plate 2 x 4 | 3020 | Grigio bluastro chiaro | 4× |
| Plate 2 x 3 | 3021 | Bianco | 2× |
| Plate 2 x 3 | 3021 | Grigio bluastro chiaro | 10× |
| Plate 2 x 3 | 3021 | Beige | 2× |
| Plate 2 x 3 | 3021 | Grigio bluastro chiaro | 1× |
| Plate 2 x 3 | 3021 | Blu scuro | 2× |
| Plate 2 x 3 | 3021 | Verde scuro | 10× |
| Plate 2 x 3 | 3021 | Nero | 8× |
| Plate 2 x 3 | 3021 | Rosso | 1× |
| Plate 2 x 2 | 3022 | Nero | 2× |
| Plate 2 x 2 | 3022 | Bianco | 1× |
| Plate 2 x 2 | 3022 | Grigio bluastro scuro | 1× |
| Plate 2 x 2 | 3022 | Blu scuro | 2× |
| Plate 2 x 2 | 3022 | Rosso | 2× |
| Plate 2 x 2 | 3022 | Grigio bluastro chiaro | 11× |
| Plate 1 x 2 | 3023 | Trans-rosa scuro | 3× |
| Plate 1 x 2 | 3023 | Trans-azzurro | 3× |
| Plate 1 x 2 | 3023 | Giallo chiaro brillante | 10× |
| Plate 1 x 2 | 3023 | Blu scuro | 5× |
| Plate 1 x 2 | 3023 | Grigio bluastro chiaro | 10× |
| Plate 1 x 1 | 3024 | Grigio bluastro chiaro | 9× |
| Plate 1 x 1 | 3024 | Nero | 2× |
| Plate 1 x 1 | 3024 | Trans-azzurro | 1× |
| Plate 4 x 4 | 3031 | Bianco | 1× |
| Plate 2 x 8 | 3034 | Grigio bluastro chiaro | 1× |
| Plate Round Corner 3 x 3 | 30357 | Nero | 4× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Bianco | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Nero | 1× |
| Slope 45? 2 x 2 | 3039 | Grigio bluastro scuro | 4× |
| Brick Round 1 x 1 Open Stud | 3062b | Opal Trans-Clear | 1× |
| Tile 1 x 2 with Groove | 3069b | Grigio bluastro chiaro | 7× |
| Tile 1 x 2 with Groove | 3069b | Trans-azzurro | 2× |
| Tile 1 x 1 with Groove | 3070b | Giallo chiaro brillante | 2× |
| Animal / Creature Body Part, Claw with Clip | 3171 | Oro perlato | 6× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Grigio bluastro chiaro | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Bianco | 1× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Bianco | 2× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Nero | 2× |
| Technic Beam 3 x 3 L-Shape Thin | 32056 | Grigio bluastro scuro | 4× |
| Technic Axle 2 Notched | 32062 | Rosso | 6× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Grigio bluastro scuro | 1× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Beige | 4× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Grigio bluastro chiaro | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Grigio bluastro chiaro | 2× |
| Technic Axle 5 | 32073 | Giallo | 2× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Grigio bluastro scuro | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Grigio bluastro scuro | 6× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Grigio bluastro chiaro | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Oro perlato | 2× |
| Slope 33° 3 x 2 | 3298 | Grigio bluastro chiaro | 2× |
| Slope 33° 3 x 2 | 3298 | Rosso | 1× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Grigio bluastro chiaro | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Grigio bluastro chiaro | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Oro perlato | 2× |
| Plate Special 4 x 4 with 3 x 3 Quarter Round Cutout | 35044 | Bianco | 4× |
| Technic Driving Ring Extension, 8 Ridges | 35186 | Grigio bluastro chiaro | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Bianco | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Grigio bluastro chiaro | 5× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Nero | 14× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Giallo chiaro brillante | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Grigio bluastro chiaro | 6× |
| Plate 1 x 3 | 3623 | Grigio bluastro chiaro | 1× |
| Plate 1 x 3 | 3623 | Nero | 2× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Grigio bluastro chiaro | 1× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Grigio bluastro chiaro | 4× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Nero | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Grigio bluastro scuro | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Grigio bluastro chiaro | 2× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Grigio bluastro chiaro | 2× |
| Technic Axle 4 | 3705 | Nero | 2× |
| Plate 1 x 4 | 3710 | Nero | 2× |
| Plate 1 x 4 | 3710 | Grigio bluastro chiaro | 2× |
| Plate 1 x 4 | 3710 | Verde scuro | 1× |
| Plate 1 x 4 | 3710 | Blu scuro | 2× |
| Plate 1 x 4 | 3710 | Giallo chiaro brillante | 2× |
| Technic Bush | 3713 | Grigio bluastro chiaro | 2× |
| Creature Body Part, Dragon Head Upper Jaw, Hollow Eyes, Spikes | 3770 | Bianco | 1× |
| Equipment Lantern | 37776 | Pearl Titanium | 1× |
| Plate 2 x 6 | 3795 | Nero | 5× |
| Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 3839b | Oro perlato | 1× |
| Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 3839b | Grigio bluastro chiaro | 1× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Grigio bluastro scuro | 4× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Beige | 1× |
| Bracket 2 x 2 - 2 x 2 | 3956 | Nero | 2× |
| Technic Pin Long without Friction Ridges, with Anti-Roll Notch | 39888 | Beige | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Grigio bluastro chiaro | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Beige | 8× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Rosso | 3× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Grigio bluastro scuro | 3× |
| Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | 40379 | Bianco | 1× |
| Technic Beam 1 x 2 Thin | 41677 | Bianco | 4× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Nero | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Nero | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Beige scuro | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Rosso | 2× |
| Wedge Plate 4 x 2 Right | 41769 | Verde scuro | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Verde scuro | 2× |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 42003 | Nero | 4× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Nero | 1× |
| Wheel 11 x 8 with Center Groove | 42610 | Grigio bluastro chiaro | 2× |
| Technic Pin 1/2 | 4274 | Grigio bluastro chiaro | 16× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Nero | 8× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Grigio bluastro chiaro | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Grigio bluastro chiaro | 4× |
| Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Top | 43045 | Grigio bluastro chiaro | 4× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Nero | 1× |
| Wedge Curved Inverted 6 x 4 | 43713 | Nero | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Grigio bluastro chiaro | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Grigio bluastro chiaro | 2× |
| Technic Rotation Joint Disk with Pin and 3L Beam Thick | 44225 | Grigio bluastro chiaro | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | 44301b | Nero | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Grigio bluastro chiaro | 3× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Grigio bluastro chiaro | 8× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Grigio bluastro scuro | 6× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Grigio bluastro chiaro | 2× |
| Technic Axle 3 | 4519 | Grigio bluastro chiaro | 2× |
| Technic Pin Connector 3L with 2 Pins and Center Hole [Pin Ridges Across Part] | 46189 | Nero | 2× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Nero | 8× |
| Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 47458 | Oro perlato | 2× |
| Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 48267 | Oro perlato | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Oro perlato | 4× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Rosso | 1× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Grigio bluastro chiaro | 2× |
| Slope Inverted 45° 4 x 2 Double | 4871 | Bianco | 1× |
| Tile Special 2 x 2 with Top Pin [Squared Holes] | 49153 | Nero | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Light Aqua | 2× |
| Engine / Air Scoop 2 x 2 | 50943 | Argento opaco | 1× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Nero | 1× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | 53451 | Bianco | 18× |
| Weapon Axe Head, Clip-on (Viking) [Thick Clip] | 53454 | Argento opaco | 1× |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 53540 | Grigio bluastro scuro | 1× |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 53540 | Grigio bluastro chiaro | 2× |
| Technic Ball Joint with Through Axle Hole | 53585 | Nero | 10× |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots] | 53923 | Nero | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Grigio bluastro chiaro | 6× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Giallo chiaro brillante | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Light Aqua | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Rosso | 4× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Rosso | 1× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Grigio bluastro chiaro | 2× |
| Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | 57909b | Nero | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Bianco | 4× |
| Cone 1 x 1 [Top Groove] | 59900 | Grigio bluastro scuro | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Trans-rosa scuro | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Bianco | 7× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Grigio bluastro chiaro | 4× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Nero | 1× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Bianco | 5× |
| Equipment Hose Nozzle / Gun with Side String Hole Simplified | 60849 | Oro perlato | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Nero | 28× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Nero | 6× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Giallo | 5× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Grigio bluastro scuro | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-azzurro | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Oro perlato | 6× |
| Tile 1 x 3 | 63864 | Grigio bluastro chiaro | 4× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Marrone rossastro | 2× |
| Bar 6L with Stop Ring | 63965 | Nero | 1× |
| Wedge Curved 4 x 3 No Studs [Plain] | 64225 | Grigio bluastro chiaro | 2× |
| Technic Panel Fairing #13 Large Short Smooth, Side A | 64394 | Verde scuro | 2× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Oro perlato | 4× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Nero | 4× |
| Technic Panel Fairing #14 Large Short Smooth, Side B | 64680 | Verde scuro | 2× |
| Large Figure Weapon Sword, Blade with Bar, Single Edge | 65184 | Giallo chiaro brillante | 2× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Oro perlato | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Beige | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Rosso | 1× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Nero | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Grigio bluastro scuro | 1× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Bianco | 2× |
| Technic Axle 3 with Stud | 6587 | Beige scuro | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Nero | 2× |
| Weapon Hilt Symmetric | 66909 | Grigio bluastro scuro | 1× |
| Weapon Hilt Symmetric | 66909 | Verde sabbia | 1× |
| Slope Curved 4 x 3 with 3 Layers, 1 x 3 Cutout on Underside | 66955 | Verde scuro | 5× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Nero | 10× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Nero | 2× |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 68568 | Nero | 4× |
| Plant / Animal Body Part, Tree / Branch / Tail / Appendage / Tentacle with Pin | 69858 | Light Aqua | 8× |
| Weapon Sword, Broad with Trans-Red Blade pattern | 7182pat0001 | Oro perlato | 1× |
| Slope Inverted 45° 4 x 4 Double with 2 Holes | 72454 | Nero | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Grigio bluastro chiaro | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Nero | 9× |
| Technic Beam 1 x 11 Thick with Alternating Holes | 73507 | Nero | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Grigio bluastro chiaro | 2× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Nero | 1× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Nero | 1× |
| Plate Special 1 x 1 with Handle on 2 Ends | 78257 | Nero | 1× |
| Bracket 5 x 2 x 1 1/3 with Bottom Stud Holder | 79180 | Nero | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Nero | 4× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Nero | 2× |
| Technic Rotation Joint Disk with Pin and Double Rotation Joint Ball Half | 79505 | Nero | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Blu scuro | 2× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Verde scuro | 2× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Oro perlato | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Bianco | 1× |
| Flag 2 x 2 Trapezoid with Flared Area between Clips | 80324 | Bianco | 2× |
| Rotation Joint Socket with 2 Pins | 80563 | Grigio bluastro scuro | 5× |
| Plate Round 1 x 1 with Open Stud | 85861 | Trans-azzurro | 2× |
| Technic Brick 1 x 2 with Hole and Dual Beam Extensions | 85943 | Grigio bluastro scuro | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Light Aqua | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Rosso | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Grigio bluastro chiaro | 7× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Giallo chiaro brillante | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Grigio bluastro chiaro | 4× |
| Tile 2 x 4 with Groove | 87079 | Blu scuro | 2× |
| Technic Axle 4 with Stop | 87083 | Grigio bluastro scuro | 4× |
| Bar 3L | 87994 | Nero | 3× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Marrone rossastro | 1× |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 90194 | Giallo chiaro brillante | 1× |
| Windscreen 7 x 4 x 2 Round with Handle | 92279 | Trans-trasparente | 1× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Pearl Titanium | 1× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Marrone rossastro | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Blu scuro | 4× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Grigio bluastro chiaro | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Bianco | 1× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Nero | 4× |
| Brick and Axle Separator v2.0 | 96874 | Arancione | 1× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Grigio bluastro chiaro | 4× |
| Tile Round 1 x 1 | 98138 | Grigio bluastro chiaro | 2× |
| Tile Round 1 x 1 | 98138 | Trans-azzurro | 2× |
| Tile Round 1 x 1 | 98138 | Trans-trasparente | 2× |
| Tile Round 1 x 1 | 98138 | Nero | 2× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Bianco | 6× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Pearl Titanium | 2× |
| Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes | 98585 | Grigio bluastro chiaro | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Grigio bluastro chiaro | 8× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Rosso | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Grigio bluastro chiaro | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Nero | 3× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Oro perlato | 9× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Verde scuro | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Argento opaco | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Nero | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Nero | 18× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Blu scuro | 3× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Grigio bluastro chiaro | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Light Aqua | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Grigio bluastro chiaro | 3× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Giallo chiaro brillante | 4× |
| Torso, Tan Bandages, Olive Green Scaled Chest print, Tan Arms, Olive Green Hands | 973c26h20pr0002 | Arancione scuro | 1× |
| Hat, Round, Wide, Flat | 5987 | Marrone rossastro | 1× |
| Hips and Reddish Brown Legs with Reddish Brown Belt, Dark Orange Robe Ends, Olive Green Skin Through Tears print | 970c19pr0006 | Marrone rossastro | 1× |
| Minifig Neckwear Armour Shoulder Pads Spiky | 88295 | Marrone rossastro | 1× |
| Minifig Head Kur, Bandages, Olive Green Face, Yellow Eyes, Crooked White Teeth, Grin, Light Bluish Grey Ponytail | 28621pr9668 | Beige | 1× |
| Hair Swept Back, Tan with Headband Pattern | 69562pat0001 | Verde brillante | 1× |
| Hips and Bright Green Legs with Dark Red Sash, Knee Caps, Robe Ends, Dark Green Trim print | 970c06pr0007 | Verde brillante | 1× |
| Minifig Neckwear Shoulder Armour With Pearl Gold Dragon pattern | 7104pat0001 | Verde brillante | 1× |
| Torso, Ninja Robes, Dark Green Trim, Dark Red Plated Armor, Dark Tan Strap, Gold Dragon print, Bright Green Arms, Black Hands | 973c06h03pr0003 | Verde brillante | 1× |
| Minifig Head Lloyd, Reddish Brown Eyebrows, Green Eyes, Lopsided Open Mouth Grin / Gritted Teeth Print | 3626cpr2255 | Giallo | 1× |
| Hair, High Ponytail with Dark Blue Headphones, Cat Ears pattern | 5326pat0001 | Corallo | 1× |
| Minifig Neckwear Shoulder Armour With Pearl Gold Dragon pattern | 7104pat0001 | Blu scuro | 1× |
| Hips and White Legs with Coral Sash, Robe Ends, Gold/Sand Blue Knee Pads print | 970c27pr0032 | Bianco | 1× |
| Torso, Ninja Robes, Dark Blue/Coral Trim, Dark Blue Belt, Gold Cat print, White Arms, Dark Blue Hands | 973c27h05pr0003 | Bianco | 1× |
| Minifig Head Sora, Coral Eyeshadow and Lips, Gold Markings, Golden Eyes / Angry Grin print | 28621pr3985 | Giallo | 1× |
| Minifig Neckwear Armour with Dragon Jaw | 5985 | Blu scuro | 1× |
| Minifig Head Spectral Dragonian Warrior, Medium Azure Face, Dark Blue Lines, Red Eyes, White Fangs, Red Mouth, Medium Azure/Red Shapes in Back | 28621pr9670 | Light Aqua | 1× |
| Torso, Red Belt, Silver Dragon Skull, Horns print, Trans-Light Blue Arms, Red Hands | 973c65h22pr0001 | Light Aqua | 1× |
| Creature Body Part, Dragon, Head | 5975 | Pearl Titanium | 1× |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | 13564 | Rosso | 2× |
| Lower Body, Ghost with Marbled Light Aqua pattern | 19859pat0016 | Trans-azzurro | 1× |
| Creature Body Part, Dragon, Tail | 5978 | Blu scuro | 1× |
| Creature Body Part, Dragon, Wing | 5984 | Blu scuro | 2× |
| Hips and Trans-Light Blue Legs with Silver Armor, Red Tattered Skirt print | 970c65pr0001 | Argento opaco | 1× |
| Minifig Neckwear Armour with Dragon Jaw | 5985 | Pearl Titanium | 1× |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | 13564 | Bianco | 2× |
| Creature Body Part, Dragon, Head | 5975 | Bianco | 1× |
DNA della build
Dettagli inventario pezzi per Lloyd’s Jet Mech
Con 1112 pezzi, questa build e +143% rispetto al set Ninjago medio e +75% rispetto alla media dei set del 2025.
Rispetto al set Ninjago medio
Set Ninjago medio: 458 pezzi su 408 altri set.
Rispetto al set medio del 2025
Set medio del 2025: 636 pezzi su 561 altri set.
Profilo colori
Colore dominante
Grigio bluastro chiaro
Pezzi unici
4.7 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Plate 2 x 3
36xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.



![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6047417.jpg)

![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6042956.jpg)



