


Rivivi i tuoi ricordi di Allenatore più cari con il magnifico kit di costruzione LEGO Pokémon Pikachu e Poké Ball (72152-1). Cattura l'emozione della battaglia o un momento di quiete con questa iconica figura di Pokémon di tipo Elettro. Questo vibrante modello presenta Pikachu nel suo classico giallo con distintive punte delle orecchie nere e guance rosse, traboccante dell'energia simboleggiata da scintille di fulmine. Esponi la versatile coda posizionabile di Pikachu, configurabile per versioni maschili o femminili, mentre si lancia dinamicamente da una Poké Ball aperta, o riposa all'interno di una chiusa. La base espositiva incorpora con orgoglio il '25', un astuto riferimento all'amato numero di Pokédex di Pikachu, rendendolo un vivace elemento d'arredo per la sala giochi di ogni fan dedicato di Pokémon.
Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Plate 2 x 2 Corner 2420 | Nero | 6× |
![]() Tile 1 x 4 with Groove 2431 | Nero | 4× |
![]() Plate 2 x 12 2445 | Nero | 1× |
![]() Brick 2 x 3 3002 | Nero | 2× |
![]() Brick 2 x 2 3003 | Nero | 1× |
![]() Plate 2 x 4 3020 | Nero | 7× |
![]() Plate 2 x 3 3021 | Nero | 9× |
![]() Plate 2 x 2 3022 | Nero | 2× |
![]() Plate 1 x 2 3023 | Nero | 11× |
![]() Plate 1 x 1 3024 | Nero | 8× |
Visualizzati 10 di 375 pezzi
🔓 Registrati per vedere tutti i pezzi| Plate 2 x 4 | 3020 | Nero | 7× |
| Plate 2 x 3 | 3021 | Nero | 9× |
| Plate 2 x 2 | 3022 | Nero | 2× |
| Plate 1 x 2 | 3023 | Nero | 11× |
| Plate 1 x 1 | 3024 | Nero | 8× |
| Plate 4 x 6 | 3032 | Nero | 2× |
| Plate 2 x 8 | 3034 | Nero | 3× |
| Plate 4 x 8 | 3035 | Nero | 1× |
| FLAT TILE 2X2 | 3068 | Nero | 6× |
| FLAT TILE 1X2 | 3069 | Nero | 2× |
| FLAT TILE 1X1 | 3070 | Nero | 1× |
| Plate 1 x 3 | 3623 | Nero | 14× |
| Plate 1 x 6 | 3666 | Nero | 7× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Nero | 2× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Nero | 5× |
| Plate 1 x 4 | 3710 | Nero | 16× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Nero | 1× |
| Tile 1 x 8 with Groove | 4162 | Nero | 3× |
| Plate 2 x 16 | 4282 | Nero | 2× |
| TAP Ø4.9/6.4 | 4599 | Nero | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Nero | 3× |
| Tile 1 x 6 with Groove | 6636 | Nero | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Nero | 4× |
| Wedge Plate 4 x 2 Right | 41769 | Nero | 5× |
| Wedge Plate 4 x 2 Left | 41770 | Nero | 7× |
| Wedge Plate 3 x 2 Right | 43722 | Nero | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Nero | 1× |
| Plate 4 x 4 | 3031 | Nero | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Nero | 5× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Nero | 2× |
| Tile 2 x 4 with Groove | 87079 | Nero | 5× |
| BRICK 1X2X2 | 3245 | Nero | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Nero | 2× |
| Slope Curved 4 x 1 Inverted | 13547 | Nero | 2× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Nero | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 2× |
| Wedge Plate 2 x 2 Left | 24299 | Nero | 1× |
| Slope Curved 3 x 2 No Studs | 24309 | Nero | 1× |
| Tile 2 x 3 | 26603 | Nero | 8× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Nero | 1× |
| Plate 3 x 3 | 11212 | Nero | 4× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Nero | 4× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Nero | 4× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Nero | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Nero | 5× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Nero | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Nero | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Nero | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Nero | 1× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Nero | 12× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Nero | 1× |
| BRICK 2X2 Ø4.85 VERTIC. SNAP | 48454 | Nero | 2× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Nero | 6× |
| Tile 2 x 6 | 69729 | Nero | 7× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Nero | 2× |
| PLATE 1X2 W/STUB/ALONG/UPPER P | 53922 | Nero | 1× |
| Plate 1 x 5 | 78329 | Nero | 2× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Nero | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Nero | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Nero | 10× |
| Plate 3 x 3 Corner | 77844 | Nero | 2× |
| TILE 4X4, W/ BOW, NO. 5 | 3477 | Nero | 4× |
| Plate 2 x 3 with 1 x 1 Cutout | 73831 | Nero | 2× |
| Wedge Plate 8 x 3, 8° Right | 3545 | Nero | 6× |
| Wedge Plate 8 x 3, 8° Left | 3544 | Nero | 10× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Nero | 4× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Nero | 1× |
| BRICK 2X2 W/ BALL Ø 10.2 | 57909 | Nero | 2× |
| Cone 2 x 2 x 2 Inverted | 49309 | Nero | 2× |
| Slope Curved 3 x 1 x 2/3 | 7302 | Nero | 2× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Nero | 1× |
| Slope 1 x 4 with 1 x 2 Cutout | 5654 | Nero | 29× |
| Technic Axle 4 | 3705 | Nero | 2× |
| Technic Axle 2 Notched | 32062 | Nero | 14× |
| Technic Beam 1 x 5 Thick | 32316 | Nero | 1× |
| Technic Beam 1 x 3 Thick | 32523 | Nero | 1× |
| Technic Beam 1 x 2 Thick | 43857 | Nero | 1× |
| Technic Beam 1 x 7 Thick | 32524 | Nero | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Nero | 3× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Nero | 2× |
| Technic Pin Connector Hub with 2 Perpendicular Axles | 10197 | Nero | 3× |
| ANGLE ELEMENT, 157,5 DEGR. [3] | 42128 | Nero | 2× |
| ANGLE ELEMENT, 112,5 DEGR. [5] | 41488 | Nero | 4× |
| TECHNIC ANGULAR BEAM 3X7 | 42160 | Nero | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Nero | 34× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Nero | 2× |
| BUSH FOR CROSS AXLE | 42798 | Nero | 2× |
| Technic Axle and Pin Connector Angled #7 - 168.75° | 4450 | Nero | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Beige | 2× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Beige | 2× |
| BRICK 2X8 | 93888 | Beige | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Beige | 6× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Beige | 6× |
| Plate 2 x 6 | 3795 | Blu scuro | 1× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Grigio bluastro scuro | 1× |
| ROOF TILE 2X3/25° INV. | 3747 | Dark Blue-Violet | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Blu scuro | 6× |
| FLAT TILE 1X1, ROUND | 35381 | Dark Blue-Violet | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Viola scuro | 8× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Nero | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Blu scuro | 7× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Blu scuro | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Nero | 12× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Nero | 22× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Grigio bluastro scuro | 2× |
| Brick 1 x 2 | 3004 | Nero | 4× |
| Plate 2 x 4 | 3020 | Nero | 13× |
| Brick 1 x 4 | 3010 | Nero | 1× |
| Plate 1 x 2 | 3023 | Nero | 18× |
| Plate 2 x 2 | 3022 | Nero | 2× |
| ROUND BRICK 1X1 | 3062 | Verde brillante | 4× |
| Brick Special 1 x 1 x 1 2/3 with 6 Studs on 3 Sides | 7729 | Verde brillante | 5× |
| Plate 1 x 4 | 3710 | Arancione | 6× |
| Plate 2 x 6 | 3795 | Arancione | 6× |
| Brick 2 x 4 | 3001 | Arancione | 2× |
| Brick 1 x 1 | 3005 | Arancione | 1× |
| Brick Special 1 x 1 with Headlight | 4070 | Arancione | 4× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Arancione | 7× |
| Plate 1 x 3 | 3623 | Arancione | 2× |
| ELEMENT SEPARATOR | 31510 | Arancione | 1× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Arancione | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Arancione | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Arancione | 23× |
| TECHNIC LEVER 3M | 65123 | Arancione | 2× |
| Brick 1 x 2 | 3004 | Nero | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Nero | 10× |
| Plate 2 x 4 | 3020 | Rosso | 3× |
| Plate 2 x 2 | 3022 | Rosso | 2× |
| Plate 1 x 2 | 3023 | Rosso | 4× |
| Plate 2 x 6 | 3795 | Rosso | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Rosso | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Rosso | 1× |
| Plate Round Corners 2 x 6 Double | 18980 | Rosso | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Rosso | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Rosso | 4× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Rosso | 10× |
| Bar 2L with Stop in Center | 78258 | Rosso | 2× |
| Brick Curved 1 x 1 | 7126 | Rosso | 4× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Rosso | 2× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Rosso | 10× |
| Technic Axle 2 Notched | 32062 | Rosso | 4× |
| Technic Axle 4 | 3705 | Rosso | 6× |
| Slope 45? 2 x 2 | 3039 | Nero | 1× |
| Brick 1 x 1 | 3005 | Nero | 1× |
| Brick 1 x 4 | 3010 | Nero | 7× |
| Plate 2 x 6 | 3795 | Nero | 5× |
| Radiator Grille 1x2 | 2412 | Giallo | 4× |
| Plate 2 x 2 Corner | 2420 | Giallo | 11× |
| Tile 1 x 4 with Groove | 2431 | Giallo | 6× |
| Brick 1 x 2 | 3004 | Giallo | 10× |
| Brick 1 x 1 | 3005 | Giallo | 3× |
| Brick 1 x 8 | 3008 | Giallo | 2× |
| Brick 1 x 4 | 3010 | Giallo | 1× |
| Plate 2 x 4 | 3020 | Giallo | 6× |
| Plate 2 x 3 | 3021 | Giallo | 10× |
| Plate 2 x 2 | 3022 | Giallo | 35× |
| Plate 1 x 2 | 3023 | Giallo | 44× |
| Plate 1 x 1 | 3024 | Giallo | 61× |
| Plate 6 x 10 | 3033 | Giallo | 2× |
| FLAT TILE 2X2 | 3068 | Giallo | 4× |
| FLAT TILE 1X2 | 3069 | Giallo | 2× |
| FLAT TILE 1X1 | 3070 | Giallo | 7× |
| Plate 1 x 8 | 3460 | Giallo | 7× |
| Brick 1 x 3 | 3622 | Giallo | 3× |
| Plate 1 x 3 | 3623 | Giallo | 21× |
| Plate 1 x 6 | 3666 | Giallo | 4× |
| Plate 1 x 4 | 3710 | Giallo | 13× |
| ROOF TILE 2X3/25° INV. | 3747 | Giallo | 2× |
| Plate 2 x 6 | 3795 | Giallo | 6× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Giallo | 4× |
| Tile 1 x 6 with Groove | 6636 | Giallo | 4× |
| Wedge Plate 4 x 2 Right | 41769 | Giallo | 5× |
| Wedge Plate 4 x 2 Left | 41770 | Giallo | 5× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Giallo | 17× |
| Wedge Plate 3 x 2 Right | 43722 | Giallo | 4× |
| Wedge Plate 3 x 2 Left | 43723 | Giallo | 4× |
| Tile 1 x 8 with Groove | 4162 | Giallo | 2× |
| Plate 4 x 4 | 3031 | Giallo | 4× |
| Slope Curved 3 x 1 No Studs | 50950 | Giallo | 6× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Giallo | 11× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Giallo | 11× |
| Tile 1 x 3 | 63864 | Giallo | 8× |
| Tile 2 x 4 with Groove | 87079 | Giallo | 9× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Giallo | 4× |
| Slope 18° 4 x 1 | 60477 | Giallo | 3× |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Giallo | 6× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Giallo | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Giallo | 6× |
| Slope Curved 4 x 2 No Studs | 93606 | Giallo | 4× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Giallo | 13× |
| Plate 1 x 10 | 4477 | Giallo | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Giallo | 2× |
| Plate Round Corners 2 x 6 Double | 18980 | Giallo | 1× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Giallo | 7× |
| Wedge Plate 2 x 2 Right | 24307 | Giallo | 3× |
| Wedge Plate 2 x 2 Left | 24299 | Giallo | 3× |
| Slope Curved 2 x 1 Inverted | 24201 | Giallo | 6× |
| Tile 2 x 3 | 26603 | Giallo | 6× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Giallo | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Giallo | 2× |
| Slope Curved 3 x 2 No Studs | 24309 | Giallo | 28× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Giallo | 3× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Giallo | 13× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Giallo | 4× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Giallo | 10× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Giallo | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Giallo | 10× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Giallo | 10× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Giallo | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Giallo | 5× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Giallo | 4× |
| Tile 2 x 6 | 69729 | Giallo | 1× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Giallo | 5× |
| Plate Round Corner 4 x 4 | 30565 | Giallo | 6× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Giallo | 4× |
| Brick Round Corner, Curved 3 x 3 x 1 Quarter Circle | 76797 | Giallo | 10× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Giallo | 4× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Giallo | 4× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Giallo | 6× |
| PLATE 1X2 W/STUB VERTICAL/END | 49715 | Giallo | 2× |
| Brick Curved 2 x 1 with Inverted Cutout | 78666 | Giallo | 4× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Giallo | 7× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Giallo | 4× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Giallo | 3× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Giallo | 2× |
| Slope Double 45° 1 x 1 | 35464 | Giallo | 6× |
| Brick Round Corner 4 x 4 x 1 | 5651 | Giallo | 4× |
| Slope Curved 1 x 4 x 1 2/3 No Studs | 3573 | Giallo | 8× |
| Plate 1 x 5 | 78329 | Giallo | 4× |
| Slope Curved 2 x 2 with Stud Notch Right | 5093 | Giallo | 1× |
| Slope Curved 2 x 2 with Stud Notch Left | 5095 | Giallo | 1× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Giallo | 6× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Giallo | 6× |
| Plate 3 x 3 Corner | 77844 | Giallo | 2× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Giallo | 2× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Giallo | 1× |
| Brick Curved 1 x 1 | 7126 | Giallo | 4× |
| Brick Round Corner 3 x 3 x 2 Dome Top | 88293 | Giallo | 2× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Giallo | 7× |
| Brick Curved 1 x 2 x 1 2/3 with 1 Cutout | 5907 | Giallo | 22× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Giallo | 8× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Giallo | 2× |
| Technic Axle 3 | 4519 | Giallo | 2× |
| 1/2 BUSH | 42136 | Giallo | 2× |
| TECHNIC LEVER 2M | 44862 | Giallo | 4× |
| Brick 2 x 4 | 3001 | Trans-verde | 2× |
| Brick 1 x 1 | 3005 | Trans-verde | 8× |
| Plate 2 x 4 | 3020 | Trans-verde | 2× |
| Plate 2 x 2 Corner | 2420 | Verde sabbia | 20× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Verde sabbia | 6× |
| Plate 2 x 8 | 3034 | Grigio bluastro chiaro | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Verde sabbia | 13× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Grigio bluastro chiaro | 2× |
| ANGLE ELEMENT, 112,5 DEGR. [5] | 41488 | Trans-verde | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Nero | 4× |
| Plate 4 x 4 | 3031 | Grigio bluastro chiaro | 2× |
| Plate 4 x 8 | 3035 | Grigio bluastro chiaro | 1× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Grigio bluastro chiaro | 12× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Beige | 2× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Grigio bluastro scuro | 2× |
| Plate 1 x 6 | 3666 | Grigio bluastro scuro | 3× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Grigio bluastro scuro | 2× |
| Brick 1 x 3 | 3622 | Grigio bluastro scuro | 1× |
| Plate 4 x 4 | 3031 | Grigio bluastro scuro | 10× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Grigio bluastro scuro | 2× |
| Technic Axle 4 with Stop | 87083 | Grigio bluastro scuro | 2× |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 26604 | Nero | 4× |
| ROUND BRICK 1X1 | 3062 | Lavanda | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Nero | 2× |
| PLATE 2X2 ROUND | 4032 | Nero | 2× |
| Plate 4 x 6 | 3032 | Nero | 3× |
| Brick 1 x 1 | 3005 | Nero | 8× |
| Brick 1 x 6 | 3009 | Nero | 2× |
| Brick 2 x 4 | 3001 | Nero | 4× |
| FLAT TILE 2X2 | 3068 | Medium Azur | 1× |
| Plate 1 x 4 | 3710 | Nero | 16× |
| Brick 1 x 2 | 3004 | Nero | 7× |
| Plate 1 x 2 | 3023 | Nero | 11× |
| Tile 1 x 3 | 63864 | Nero | 1× |
| Plate 1 x 3 | 3623 | Nero | 3× |
| Plate 4 x 4 | 3031 | Nero | 2× |
| Plate 2 x 2 Corner | 2420 | Nero | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Nero | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Nero | 2× |
| Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 3 Support Walls on Bottom | 72132 | Nero | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Nero | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Nero | 4× |
| Plate 1 x 2 | 3023 | Viola scuro | 39× |
| Brick 1 x 4 | 3010 | Viola scuro | 3× |
| FLAT TILE 2X2 | 3068 | Viola scuro | 2× |
| Brick 2 x 2 Corner | 2357 | Nero | 2× |
| Plate 2 x 2 | 3022 | Grigio bluastro chiaro | 2× |
| Brick 2 x 4 | 3001 | Grigio bluastro chiaro | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Grigio bluastro chiaro | 2× |
| Plate 2 x 3 | 3021 | Grigio bluastro chiaro | 10× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Grigio bluastro chiaro | 2× |
| Technic Brick 1 x 14 [13 Pin Holes] | 32018 | Grigio bluastro chiaro | 2× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Grigio bluastro chiaro | 2× |
| BEARING ELEMENT 2X2 W.D. SNAP | 65514 | Nero | 1× |
| Plate 1 x 2 | 3023 | Nero | 2× |
| Plate 1 x 3 | 3623 | Nero | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Nero | 4× |
| Plate 1 x 4 | 3710 | Nero | 1× |
| Plate 2 x 10 | 3832 | Nero | 1× |
| Plate 1 x 8 | 3460 | Nero | 1× |
| Plate 1 x 6 | 3666 | Nero | 1× |
| Plate 1 x 1 | 3024 | Nero | 5× |
| Brick 1 x 8 | 3008 | Nero | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Nero | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Nero | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Nero | 1× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Nero | 4× |
| TECHNIC ROTOR, 2 BLADES | 50029 | Marrone rossastro | 1× |
| Slope Curved 3 x 1 No Studs | 50950 | Nero | 8× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Nero | 2× |
| SHAFT 3M Ø3.2 | 17715 | Marrone rossastro | 1× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Nero | 5× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Nero | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Nero | 4× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Nero | 2× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Nero | 1× |
| Brick Curved 1 x 2 x 1 2/3 with 1 Cutout | 5907 | Nero | 8× |
| Bracket 5 x 1 x 1 1/3 | 5712 | Nero | 1× |
| BRICK 2X2 W/ BALL Ø 10.2 | 57909 | Marrone rossastro | 1× |
| Technic Axle 5 with Stop | 15462 | Marrone rossastro | 2× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Nero | 1× |
| Plate 1 x 10 | 4477 | Nero | 1× |
| Plate 4 x 8 | 3035 | Beige scuro | 1× |
| Slope 33° 3 x 1 | 4286 | Beige scuro | 2× |
| Plate 2 x 2 | 3022 | Beige scuro | 2× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 2 Sides | 80796 | Trans-trasparente | 7× |
| Weapon Sword with Jagged Edges, Axle | 98856 | Trans-azzurro | 4× |
| Wave / Lightning with Axle Hole | 2149 | Trans-Bright Green | 5× |
| Minifig Ring 1 x 1 | 11010 | Cromo oro | 2× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Oro perlato | 1× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Bianco | 2× |
| Plate 2 x 2 | 3022 | Bianco | 6× |
| Plate 1 x 2 | 3023 | Bianco | 4× |
| Plate 1 x 1 | 3024 | Bianco | 2× |
| FLAT TILE 2X2 | 3068 | Bianco | 1× |
| Plate 1 x 8 | 3460 | Bianco | 1× |
| Plate 1 x 6 | 3666 | Bianco | 3× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Bianco | 3× |
| Brick 1 x 10 | 6111 | Bianco | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Bianco | 3× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Bianco | 3× |
| Plate 6 x 6 | 3958 | Bianco | 1× |
| Plate 4 x 4 | 3031 | Bianco | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Bianco | 4× |
| Plate Round Corners 2 x 6 Double | 18980 | Bianco | 2× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Bianco | 2× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Bianco | 4× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Bianco | 6× |
| Plate 6 x 14 | 3456 | Bianco | 2× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Bianco | 4× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Bianco | 3× |
| HOLDER Ø3.2 W/TUBE Ø3.2 HOLE | 44873 | Bianco | 2× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Bianco | 18× |
| Plate 1 x 5 | 78329 | Bianco | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Bianco | 9× |
| Plate 3 x 3 Corner | 77844 | Bianco | 10× |
| Brick Curved 1 x 2 x 2/3 Double Curved Top, No Studs | 3563 | Bianco | 2× |
| TILE 4X4, W/ BOW, NO. 5 | 3477 | Bianco | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Bianco | 16× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Bianco | 4× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Bianco | 4× |
| Brick Curved 1 x 1 | 7126 | Bianco | 4× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Bianco | 2× |
| ANGLE ELEMENT, 0 DEGREES [1] | 42127 | Bianco | 2× |
DNA della build
Dettagli inventario pezzi per Pikachu and Poké Ball
Con 2050 pezzi, questa build e +142% rispetto al set Pokémon medio e +230% rispetto alla media dei set del 2026.
Rispetto al set Pokémon medio
Set Pokémon medio: 847 pezzi su 16 altri set.
Rispetto al set medio del 2026
Set medio del 2026: 621 pezzi su 441 altri set.
Profilo colori
Colore dominante
Giallo
Pezzi unici
8.9 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Plate 1 x 2
133xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.









