| Plate 2 x 3 | 3021 | Zwart | 2× |
| Plate 2 x 2 | 3022 | Zwart | 12× |
| Plate 1 x 2 | 3023 | Zwart | 3× |
| Plate 1 x 1 | 3024 | Zwart | 4× |
| Plate 2 x 8 | 3034 | Zwart | 8× |
| Plate 4 x 8 | 3035 | Zwart | 6× |
| ROUND BRICK 1X1 | 3062 | Zwart | 4× |
| FLAT TILE 1X1 | 3070 | Zwart | 2× |
| Plate 1 x 8 | 3460 | Zwart | 1× |
| Plate 1 x 3 | 3623 | Zwart | 4× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Zwart | 1× |
| Plate 1 x 4 | 3710 | Zwart | 2× |
| Plate 6 x 6 | 3958 | Zwart | 2× |
| Tile 1 x 8 with Groove | 4162 | Zwart | 6× |
| Plate 1 x 10 | 4477 | Zwart | 12× |
| Plate Special 4 x 6 with Studs on 3 Edges | 6180 | Zwart | 4× |
| Plate Special 1 x 2 with Door Rail | 32028 | Zwart | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Zwart | 10× |
| Wedge Plate 3 x 2 Left | 43723 | Zwart | 10× |
| Plate Round Corner 3 x 3 | 30357 | Zwart | 8× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Zwart | 4× |
| Plate 4 x 4 | 3031 | Zwart | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Zwart | 3× |
| Plate Special 1 x 8 with Door Rail | 4510 | Zwart | 2× |
| Turntable 4 x 4 Square Base, Locking | 61485 | Zwart | 1× |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 85080 | Zwart | 4× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Zwart | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Zwart | 6× |
| Plate 2 x 14 | 91988 | Zwart | 6× |
| BRICK 2X8 | 93888 | Zwart | 8× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Zwart | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Zwart | 3× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Zwart | 8× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Zwart | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Zwart | 2× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Zwart | 4× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Zwart | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 1× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Zwart | 2× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Zwart | 1× |
| PLATE 1X1 W/HOLDER VERTICAL | 52738 | Zwart | 6× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Zwart | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Zwart | 4× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Zwart | 2× |
| Plate 1 x 5 | 78329 | Zwart | 1× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Zwart | 4× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Zwart | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Zwart | 4× |
| Plate 3 x 3 Corner | 77844 | Zwart | 6× |
| Slope 33° 2 x 2 Double | 3300 | Zwart | 1× |
| Plate 4 x 4 Corner | 2639 | Zwart | 2× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Zwart | 2× |
| Slope Curved 2 x 2 with Stud Notch Left | 5095 | Zwart | 1× |
| 3.2 SHAFT W/ 5.9 BALL | 67692 | Zwart | 4× |
| Slope Curved 2 x 2 with Stud Notch Right | 5093 | Zwart | 1× |
| Slope Curved 3 x 1 x 2/3 | 7302 | Zwart | 4× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Zwart | 1× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Zwart | 2× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Zwart | 2× |
| Brick 1 x 6 | 3009 | Zandkleur | 6× |
| Plate 1 x 4 | 3710 | Zandkleur | 12× |
| Brick 1 x 1 | 3005 | Zandkleur | 2× |
| Plate 1 x 2 | 3023 | Zandkleur | 7× |
| Plate 2 x 8 | 3034 | Zandkleur | 3× |
| FLAT TILE 1X2 | 3069 | Zandkleur | 2× |
| Plate 2 x 2 Corner | 2420 | Zandkleur | 4× |
| Plate 2 x 2 | 3022 | Zandkleur | 2× |
| Plate 2 x 4 | 3020 | Zandkleur | 6× |
| Plate 1 x 3 | 3623 | Zandkleur | 4× |
| Brick 1 x 10 | 6111 | Zandkleur | 6× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Zandkleur | 2× |
| BRICK 2X6 | 44237 | Zandkleur | 3× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Zandkleur | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Zandkleur | 1× |
| Plate 2 x 10 | 3832 | Zandkleur | 1× |
| Tile 1 x 4 with Groove | 2431 | Zandkleur | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zandkleur | 2× |
| BRICK 2X8 | 93888 | Zandkleur | 3× |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Zandkleur | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zandkleur | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zandkleur | 5× |
| Tile Round 2 x 2 with Hole | 15535 | Zandkleur | 1× |
| Tile 2 x 4 with Groove | 87079 | Zandkleur | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Zandkleur | 1× |
| Tile Round 1 x 1 Quarter | 25269 | Zandkleur | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Zandkleur | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Zandkleur | 1× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Zandkleur | 1× |
| Slope Curved 3 x 2 No Studs | 24309 | Zandkleur | 1× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Zandkleur | 9× |
| Wedge Curved 4 x 3 No Studs [Plain] | 64225 | Zandkleur | 1× |
| BRICK 2X10 | 92538 | Zandkleur | 4× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Zandkleur | 6× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Zandkleur | 6× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Zandkleur | 2× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Zandkleur | 2× |
| Plate 1x1 with Up Right Holder | 44842 | Zandkleur | 8× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Zandkleur | 2× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Zandkleur | 1× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Zandkleur | 1× |
| FRONT 4X3X2/3, W/ BOW | 31584 | Zandkleur | 2× |
| Tile Round 1 x 2 Half Circle | 1748 | Zandkleur | 3× |
| Slope Curved 2 x 2 with Stud Notch Right | 5093 | Zandkleur | 1× |
| Slope Curved 2 x 2 with Stud Notch Left | 5095 | Zandkleur | 1× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 2× |
| Plate 1 x 2 | 3023 | Zwart | 7× |
| Plate 1 x 1 | 3024 | Zwart | 4× |
| Tile Round 1 x 1 Quarter | 25269 | Zwart | 4× |
| Plate 2 x 2 | 3022 | Zwart | 6× |
| Plate 2 x 3 | 3021 | Zwart | 6× |
| Plate Round Corner 3 x 3 | 30357 | Zwart | 6× |
| Wedge Plate 3 x 2 Left | 43723 | Zwart | 5× |
| Wedge Plate 3 x 2 Right | 43722 | Zwart | 5× |
| Plate 1 x 6 | 3666 | Zwart | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Zwart | 2× |
| Plate 2 x 4 | 3020 | Zwart | 12× |
| Plate 1 x 3 | 3623 | Zwart | 8× |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | 13564 | Zwart | 6× |
| Horn with Shaft | 88513 | Helder groen | 8× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Oranje | 10× |
| ELEMENT SEPARATOR | 31510 | Oranje | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Oranje | 2× |
| Technic Axle 2 Notched | 32062 | Rood | 8× |
| Plate 2 x 2 Corner | 2420 | Geel | 2× |
| Plate 1 x 3 | 3623 | Geel | 2× |
| PLATE 2X2 ROUND | 4032 | Geel | 3× |
| BRICK Ø16 W. CROSS | 6143 | Geel | 12× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Geel | 17× |
| FLAT TILE 1X1, ROUND | 35381 | Geel | 2× |
| Technic Axle 3 | 4519 | Geel | 2× |
| Plate 1 x 2 | 3023 | Trans-Bright Green | 4× |
| Plate 1 x 4 | 3710 | Zandkleur | 6× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-Bright Green | 5× |
| Plate 1 x 8 | 3460 | Donkerblauwgrijs | 1× |
| Plate 2 x 6 | 3795 | Donkerblauwgrijs | 1× |
| Plate 1 x 2 | 3023 | Donkerblauwgrijs | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Donkerblauwgrijs | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Donkerblauwgrijs | 4× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Donkerblauwgrijs | 14× |
| Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) | 65509 | Donkerblauwgrijs | 2× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Donkerblauwgrijs | 1× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Donkerblauwgrijs | 2× |
| Plant, Plate 1 x 1 Round with 3 Leaves | 32607 | Zwart | 3× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Zwart | 1× |
| Plate 2 x 2 | 3022 | Lichtblauwgrijs | 3× |
| Plate 1 x 5 | 78329 | Lichtblauwgrijs | 8× |
| Plate 3 x 3 Corner | 77844 | Lichtblauwgrijs | 2× |
| Brick 2 x 4 | 3001 | Lichtblauwgrijs | 1× |
| Plate 2 x 4 | 3020 | Lichtblauwgrijs | 5× |
| Plate 6 x 8 | 3036 | Lichtblauwgrijs | 1× |
| Plate 1 x 8 | 3460 | Lichtblauwgrijs | 2× |
| Brick Arch 1 x 4 | 3659 | Lichtblauwgrijs | 4× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Lichtblauwgrijs | 4× |
| Brick Arch 1 x 6 Raised Arch | 92950 | Lichtblauwgrijs | 2× |
| Plate 2 x 14 | 91988 | Lichtblauwgrijs | 2× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Lichtblauwgrijs | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Lichtblauwgrijs | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Lichtblauwgrijs | 4× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Lichtblauwgrijs | 16× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Lichtblauwgrijs | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Lichtblauwgrijs | 10× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Lichtblauwgrijs | 2× |
| Technic Pin Connector Perpendicular 2 x 2 Bent | 44809 | Lichtblauwgrijs | 2× |
| BALL W. CROSS AXLE | 3985 | Lichtblauwgrijs | 2× |
| Wedge Plate 4 x 2 Right | 41769 | Zwart | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Zwart | 1× |
| Plate 1 x 2 | 3023 | Zwart | 7× |
| FLAT TILE 1X2 | 3069 | Roodbruin | 2× |
| Plate 1 x 3 | 3623 | Zwart | 12× |
| Plate 2 x 3 | 3021 | Zwart | 11× |
| Plate 1 x 4 | 3710 | Zwart | 2× |
| Brick 2 x 4 | 3001 | Zwart | 4× |
| Plate 4 x 8 | 3035 | Zwart | 2× |
| Plate 2 x 8 | 3034 | Zwart | 1× |
| Plate 2 x 6 | 3795 | Zwart | 3× |
| Plate 2 x 2 Corner | 2420 | Zwart | 6× |
| FLAT TILE 1X1 | 3070 | Roodbruin | 2× |
| Plate 2 x 2 | 3022 | Zwart | 1× |
| Plate 1 x 8 | 3460 | Zwart | 4× |
| Plate 6 x 6 | 3958 | Zwart | 1× |
| Plate 1 x 6 | 3666 | Zwart | 2× |
| Plate 1 x 1 | 3024 | Zwart | 13× |
| Plate 4 x 4 | 3031 | Zwart | 1× |
| Plate Round Corner 3 x 3 | 30357 | Zwart | 6× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 7× |
| Wedge Sloped 45° 2 x 4 Triple | 47759 | Zwart | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Zwart | 5× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Zwart | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zwart | 13× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Zwart | 6× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 13× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Zwart | 2× |
| BRICK 2X8 | 93888 | Roodbruin | 2× |
| BRICK 2X10 | 92538 | Roodbruin | 2× |
| Tile 1 x 3 | 63864 | Zwart | 10× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Roodbruin | 3× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zwart | 22× |
| Tile Round 1 x 1 Quarter | 25269 | Zwart | 6× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Zwart | 4× |
| PLATE 3X4 W/ANGLES | 28842 | Roodbruin | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Zwart | 1× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Zwart | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Zwart | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Zwart | 3× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Zwart | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Zwart | 3× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Zwart | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Zwart | 25× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Zwart | 2× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Zwart | 2× |
| Tile 2 x 3 | 26603 | Zwart | 1× |
| Slope Curved 3 x 1 No Studs | 50950 | Zwart | 6× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Zwart | 2× |
| PLATE 1X1 W. HOLDER | 44860 | Roodbruin | 2× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Roodbruin | 4× |
| Brick Special 2 x 4 with 3 Axle Holes | 39789 | Zwart | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Zwart | 2× |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 26604 | Zwart | 6× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Zwart | 2× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Zwart | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Zwart | 1× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Zwart | 1× |
| Wedge Curved 4 x 3 No Studs [Plain] | 64225 | Zwart | 2× |
| Plate 3 x 3 | 11212 | Zwart | 2× |
| Wedge Plate 2 x 4 27° Left | 65429 | Zwart | 1× |
| Wedge Plate 2 x 4 27° Right | 65426 | Zwart | 1× |
| Brick Round Corner, Curved 3 x 3 x 1 Quarter Circle | 76797 | Zwart | 2× |
| Brick Curved 1 x 2 x 1 2/3 with 1 Cutout | 5907 | Zwart | 10× |
| Slope 1 x 6 x 1 with 1 x 2 x 1/3 Cutout | 4569 | Zwart | 2× |
| Brick Arch 1 x 5 x 3 1/3 Curved Top | 5845 | Zwart | 2× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Zwart | 3× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Zwart | 7× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Zwart | 4× |
| Brick 2 x 4 | 3001 | Donker zandkleur | 1× |
| Plate 2 x 4 | 3020 | Donker zandkleur | 1× |
| Plate 1 x 1 | 3024 | Donker zandkleur | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Donker zandkleur | 2× |
| Plate 2 x 3 | 3021 | Donker zandkleur | 2× |
| Plate 1 x 3 | 3623 | Donker zandkleur | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Donker zandkleur | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Donker zandkleur | 1× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Donker zandkleur | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Donker zandkleur | 1× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Donker zandkleur | 1× |
| Brick Special 1 x 1 with Headlight | 4070 | Donker zandkleur | 1× |
| Wedge Sloped 45° 2 x 2 Corner | 13548 | Donker zandkleur | 5× |
| Plate Round Corner 3 x 3 | 30357 | Donker zandkleur | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Donker zandkleur | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 29387 | Trans-neongroen | 16× |
| FLAT TILE 1X4 | 35371 | Trans-neongroen | 59× |
| PLATE 1X2 | 28653 | Trans-neongroen | 9× |
| FLAT TILE 1X2 | 35386 | Trans-neongroen | 27× |
| FLAT TILE 1X1 | 35403 | Trans-neongroen | 12× |
| 1/4 CIRCLE TILE 1X1 | 84411 | Trans-neongroen | 6× |
| Plate Special 2 x 2 with Double Inverted Curve, 1 Stud | 4190 | Geel | 18× |
| FLAT TILE 1X1, ROUND 'NO. 51' | 25619 | Medium Lime | 1× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Wit | 1× |
| Plate 4 x 4 | 3031 | Wit | 1× |
| Animal Body Part, Clam / Scallop Half Shell with 4 Studs | 18970 | Wit | 2× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Wit | 6× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Wit | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Wit | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Wit | 2× |