| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Geel | 1× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Wit | 1× |
| Plate 3 x 3 | 11212 | Donkerblauwgrijs | 6× |
| Plate 3 x 3 | 11212 | Rood | 10× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Wit | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Geel | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Donkerblauwgrijs | 3× |
| Slope Curved 4 x 1 Inverted | 13547 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Lichtblauwgrijs | 4× |
| Brick 1 x 1 x 3 | 14716 | Wit | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Roodbruin | 6× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Rood | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Geel | 2× |
| Insect Body Part, Leg / Tail / Tentacle / Claw | 15064 | Donker zandkleur | 4× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Wit | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Donkerblauwgrijs | 4× |
| Plate 3 x 3 Cross | 15397 | Wit | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Geel | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Donkergroen | 8× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Zwart | 4× |
| Plate Round Corners 2 x 6 Double | 18980 | Zwart | 1× |
| Slope Inverted 45° 6 x 2 Double with 2 x 4 Cutout | 22889 | Wit | 1× |
| Plate Special 1 x 2 with End Towball | 22890 | Donkerblauwgrijs | 2× |
| Brick 2 x 2 Corner | 2357 | Wit | 1× |
| Brick 2 x 2 Corner | 2357 | Donkerblauwgrijs | 4× |
| Plate 2 x 2 Corner | 2420 | Wit | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Wit | 4× |
| Slope Curved 2 x 1 Inverted | 24201 | Donkerblauwgrijs | 1× |
| Tile Round 1 x 1 Half Circle | 24246 | Wit | 10× |
| Tile 1 x 4 with Groove | 2431 | Roodbruin | 11× |
| Tile 1 x 4 with Groove | 2431 | Donkerblauwgrijs | 2× |
| Tile 1 x 4 with Groove | 2431 | Donkergroen | 14× |
| Plate 2 x 12 | 2445 | Roodbruin | 2× |
| Slope Inverted 75° 2 x 1 x 3 | 2449 | Donkerblauwgrijs | 22× |
| Brick 2 x 6 | 2456 | Rood | 4× |
| Brick 2 x 6 | 2456 | Donkergroen | 2× |
| Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout with Classic Smiling Face, White/Grey Eyebrows print | 24593pr0003 | Geel | 1× |
| Brick 1 x 16 | 2465 | Zwart | 2× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Rood | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Geel | 1× |
| Tile 2 x 3 | 26603 | Rood | 7× |
| Plate Special 2 x 3 with Rocks | 27261 | Wit | 3× |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | 2780 | Zwart | 12× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Donkerblauwgrijs | 8× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Wit | 1× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Zwart | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Wit | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Zwart | 2× |
| Brick 2 x 4 | 3001 | Rood | 8× |
| Brick 2 x 3 | 3002 | Donkerblauwgrijs | 7× |
| Brick 1 x 2 | 3004 | Roodbruin | 20× |
| Brick 1 x 2 | 3004 | Geel | 4× |
| Brick 1 x 2 | 3004 | Wit | 4× |
| Brick 1 x 2 | 3004 | Rood | 8× |
| Brick 1 x 2 | 3004 | Lichtblauwgrijs | 4× |
| Brick 1 x 2 | 3004 | Zwart | 4× |
| Brick 1 x 2 | 3004 | Donkergroen | 3× |
| Brick 1 x 1 | 3005 | Donkerblauwgrijs | 6× |
| Brick 1 x 1 | 3005 | Lichtblauwgrijs | 3× |
| Brick 1 x 1 | 3005 | Wit | 3× |
| Brick 1 x 1 | 3005 | Zwart | 3× |
| Brick 2 x 8 | 3007 | Geel | 2× |
| Brick 2 x 8 | 3007 | Rood | 2× |
| Brick 1 x 6 | 3009 | Donkerblauwgrijs | 12× |
| Brick 1 x 6 | 3009 | Rood | 4× |
| Brick 1 x 4 | 3010 | Rood | 1× |
| Brick 1 x 4 | 3010 | Donkerblauwgrijs | 9× |
| Plate 2 x 4 | 3020 | Zwart | 2× |
| Plate 2 x 4 | 3020 | Rood | 7× |
| Plate 2 x 4 | 3020 | Donkerblauwgrijs | 3× |
| Plate 2 x 3 | 3021 | Donkerblauwgrijs | 10× |
| Plate 2 x 3 | 3021 | Lichtblauwgrijs | 1× |
| Plate 2 x 3 | 3021 | Rood | 8× |
| Plate 2 x 3 | 3021 | Zwart | 5× |
| Plate 2 x 3 | 3021 | Wit | 2× |
| Plate 2 x 2 | 3022 | Lichtblauwgrijs | 3× |
| Plate 2 x 2 | 3022 | Zwart | 1× |
| Plate 2 x 2 | 3022 | Rood | 11× |
| Plate 1 x 2 | 3023 | Lichtblauwgrijs | 4× |
| Plate 1 x 2 | 3023 | Roodbruin | 14× |
| Plate 1 x 2 | 3023 | Zwart | 15× |
| Plate 1 x 2 | 3023 | Geel | 15× |
| Plate 1 x 2 | 3023 | Wit | 10× |
| Plate 1 x 2 | 3023 | Rood | 20× |
| Plate 1 x 2 | 3023 | Donkergroen | 15× |
| Plate 1 x 2 | 3023 | Donkerblauwgrijs | 8× |
| Plate 1 x 1 | 3024 | Donkerblauwgrijs | 10× |
| Plate 1 x 1 | 3024 | Zwart | 2× |
| Plate 1 x 1 | 3024 | Roodbruin | 10× |
| Plate 1 x 1 | 3024 | Wit | 4× |
| Plate 1 x 1 | 3024 | Rood | 13× |
| Plate 1 x 1 | 3024 | Geel | 4× |
| Plate 1 x 1 | 3024 | Lichtblauwgrijs | 2× |
| Plate 4 x 4 | 3031 | Rood | 1× |
| Plate 4 x 6 | 3032 | Roodbruin | 1× |
| Plate 2 x 8 | 3034 | Lichtblauwgrijs | 1× |
| Plate 2 x 8 | 3034 | Geel | 4× |
| Plate 2 x 8 | 3034 | Wit | 1× |
| Plate 2 x 8 | 3034 | Zwart | 1× |
| Plate 6 x 8 | 3036 | Roodbruin | 2× |
| Slope 18° 4 x 2 | 30363 | Donkerblauwgrijs | 3× |
| Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 9 Teeth | 30365 | Rood | 2× |
| Brick Round 2 x 2 Dome Top, Hollow Stud | 30367c | Wit | 1× |
| Slope 45° 2 x 3 | 3038 | Lichtblauwgrijs | 1× |
| Slope 45° 2 x 3 | 3038 | Donkerblauwgrijs | 3× |
| Slope 45? 2 x 2 | 3039 | Zwart | 1× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Wit | 2× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Donkerblauwgrijs | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Wit | 3× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Rood | 1× |
| Brick Round 1 x 1 Open Stud | 3062b | Wit | 2× |
| Tile 1 x 2 with Groove | 3069b | Rood | 6× |
| Tile 1 x 2 with Groove | 3069b | Roodbruin | 6× |
| Tile 1 x 2 with Groove | 3069b | Geel | 4× |
| Tile 1 x 1 with Groove | 3070b | Rood | 4× |
| Tile 1 x 1 with Groove | 3070b | Donkerblauwgrijs | 5× |
| Tile 1 x 1 with Groove | 3070b | Roodbruin | 4× |
| Tile 1 x 1 with Groove | 3070b | Geel | 1× |
| Tile 1 x 1 with Groove | 3070b | Zwart | 1× |
| Windscreen 2 x 4 x 1 1/3 [Plain] | 30841 | Rood | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Rood | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Rood | 2× |
| Technic Axle 2 Notched | 32062 | Rood | 1× |
| Technic Axle 2 Notched | 32062 | Zwart | 6× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Donkerblauwgrijs | 4× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Geel | 2× |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 32124 | Roodbruin | 11× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Wit | 2× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Rood | 1× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Wit | 2× |
| Plate 6 x 14 | 3456 | Donkerblauwgrijs | 1× |
| Plate 1 x 8 | 3460 | Rood | 2× |
| Plate 1 x 8 | 3460 | Roodbruin | 2× |
| Plate 1 x 8 | 3460 | Geel | 5× |
| Plate 1 x 8 | 3460 | Zwart | 5× |
| Plate 1 x 8 | 3460 | Wit | 1× |
| Plate 1 x 8 | 3460 | Lichtblauwgrijs | 1× |
| Plant, Pine Tree, Large, 4 x 4 x 6 2/3 | 3471 | Lichtblauwgrijs | 1× |
| Brick 1 x 3 | 3622 | Lichtblauwgrijs | 5× |
| Brick 1 x 3 | 3622 | Donkerblauwgrijs | 23× |
| Brick 1 x 3 | 3622 | Roodbruin | 2× |
| Brick 1 x 3 | 3622 | Wit | 5× |
| Brick 1 x 3 | 3622 | Rood | 1× |
| Brick 1 x 3 | 3622 | Zwart | 5× |
| Plate 1 x 3 | 3623 | Zwart | 4× |
| Plate 1 x 3 | 3623 | Wit | 2× |
| Plate 1 x 3 | 3623 | Roodbruin | 6× |
| Plate 1 x 3 | 3623 | Lichtblauwgrijs | 1× |
| Plate 1 x 3 | 3623 | Rood | 2× |
| Plate 1 x 3 | 3623 | Donkerblauwgrijs | 9× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Rood | 12× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Donkerblauwgrijs | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Rood | 3× |
| Slope Inverted 45° 2 x 1 | 3665 | Donkerblauwgrijs | 4× |
| Plate 1 x 6 | 3666 | Donkerblauwgrijs | 6× |
| Plate 1 x 6 | 3666 | Geel | 2× |
| Plate 1 x 6 | 3666 | Donkergroen | 8× |
| Plate 1 x 6 | 3666 | Rood | 2× |
| Plate 1 x 6 | 3666 | Wit | 2× |
| Slope 65° 2 x 2 x 2 with Bottom Tube | 3678b | Donkerblauwgrijs | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Geel | 3× |
| Technic Axle 6 | 3706 | Zwart | 1× |
| Plate 1 x 4 | 3710 | Donkerblauwgrijs | 2× |
| Plate 1 x 4 | 3710 | Rood | 6× |
| Plate 1 x 4 | 3710 | Wit | 3× |
| Plate 1 x 4 | 3710 | Zandkleur | 2× |
| Plate 1 x 4 | 3710 | Lichtblauwgrijs | 3× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Rood | 5× |
| Plate 2 x 6 | 3795 | Rood | 6× |
| Plate 2 x 6 | 3795 | Lichtblauwgrijs | 2× |
| Plate 2 x 6 | 3795 | Geel | 2× |
| Plate 2 x 6 | 3795 | Wit | 3× |
| Plate 2 x 6 | 3795 | Donkerblauwgrijs | 1× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Donkerblauwgrijs | 1× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Lichtblauwgrijs | 1× |
| Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Round Pin Hole | 40378 | Donker zandkleur | 2× |
| Tile 1 x 8 with Groove | 4162 | Wit | 3× |
| Tile 1 x 8 with Groove | 4162 | Lichtblauwgrijs | 3× |
| Tile 1 x 8 with Groove | 4162 | Zwart | 3× |
| Technic Beam 1 x 2 Thin | 41677 | Rood | 16× |
| Wedge Plate 4 x 2 Right | 41769 | Rood | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Rood | 2× |
| Technic Pin 1/2 | 4274 | Zwart | 4× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 6× |
| Wedge Plate 4 x 4 with 2 x 2 Cutout | 43719 | Lichtblauwgrijs | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Lichtblauwgrijs | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Donkerblauwgrijs | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Donkerblauwgrijs | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Lichtblauwgrijs | 1× |
| Dish 3 x 3 Inverted [Radar] | 43898 | Zwart | 2× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | 44301b | Donkerblauwgrijs | 2× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Donkerblauwgrijs | 9× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Lichtblauwgrijs | 7× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Rood | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Wit | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Geel | 1× |
| Slope Curved 3 x 1 No Studs | 50950 | Donkerblauwgrijs | 17× |
| Wedge Plate 2 x 4 | 51739 | Wit | 1× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | 53451 | Donker zandkleur | 2× |
| Technic Ball Joint with Through Axle Hole | 53585 | Zwart | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Geel | 2× |
| Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes | 55981 | Geel | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Donker zandkleur | 4× |
| Brick Arch 1 x 3 x 2 Curved Top | 6005 | Donkergroen | 4× |
| Brick Arch 1 x 3 x 2 Curved Top | 6005 | Rood | 9× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Wit | 1× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Wit | 2× |
| Plate 1 x 12 | 60479 | Rood | 2× |
| Plate 1 x 12 | 60479 | Roodbruin | 5× |
| Slope 65° 2 x 1 x 2 | 60481 | Donkerblauwgrijs | 4× |
| Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 60581 | Wit | 2× |
| Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 60581 | Zwart | 2× |
| Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 60581 | Donkerblauwgrijs | 1× |
| Window 1 x 2 x 2 Flat Front | 60592 | Rood | 2× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Lichtblauwgrijs | 2× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Donkergroen | 6× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Rood | 4× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Donkerblauwgrijs | 6× |
| Brick 1 x 12 | 6112 | Roodbruin | 2× |
| Brick 1 x 12 | 6112 | Rood | 2× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Wit | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Parel goud | 1× |
| Brick Arch 1 x 6 x 2 Curved Top | 6183 | Wit | 2× |
| Technic Pin Connector Round [Slotted] | 62462 | Zwart | 2× |
| Technic Pin Connector Round [Slotted] | 62462 | Lichtblauwgrijs | 16× |
| Tile 1 x 3 | 63864 | Zwart | 2× |
| Tile 1 x 3 | 63864 | Rood | 1× |
| Tile 1 x 3 | 63864 | Donkerblauwgrijs | 7× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Roodbruin | 6× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Zwart | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | 6558 | Zwart | 4× |
| Technic Axle 3 with Stud | 6587 | Donker zandkleur | 1× |
| Tile 1 x 6 with Groove | 6636 | Rood | 2× |
| Tile 1 x 6 with Groove | 6636 | Donkergroen | 2× |
| Tile 1 x 6 with Groove | 6636 | Roodbruin | 11× |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | 73983 | Rood | 2× |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | 73983 | Donkerblauwgrijs | 2× |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | 73983 | Geel | 2× |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | 73983 | Wit | 2× |
| Hose Rigid 3mm D. 32L / 25.6cm | 75c32 | Zwart | 2× |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 85080 | Geel | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Donkergroen | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Donkerblauwgrijs | 4× |
| Tile 2 x 4 with Groove | 87079 | Geel | 8× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Donkerblauwgrijs | 4× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Zandkleur | 3× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Zwart | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Roodbruin | 16× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Rood | 2× |
| Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 87544 | Lichtblauwgrijs | 4× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Rood | 1× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Roodbruin | 6× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Parel goud | 1× |
| Wedge 2 x 2 Facet | 87620 | Rood | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Wit | 1× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Donkerblauwgrijs | 1× |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 90194 | Wit | 1× |
| Technic Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes | 93571 | Zwart | 2× |
| Slope Curved 4 x 2 No Studs | 93606 | Wit | 1× |
| Slope Curved 4 x 2 No Studs | 93606 | Rood | 4× |
| Slope Curved 4 x 2 No Studs | 93606 | Donkerblauwgrijs | 2× |
| Slope Curved 4 x 2 No Studs | 93606 | Lichtblauwgrijs | 1× |
| Brick and Axle Separator v2.0 | 96874 | Oranje | 1× |
| Tile Round 1 x 1 | 98138 | Lichtblauwgrijs | 4× |
| Tile Round 1 x 1 | 98138 | Zwart | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Lichtblauwgrijs | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Wit | 1× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Lichtblauwgrijs | 1× |