


LEGO The LEGO Batman Movie 70916-1 The Batwing gebruikt The Batwing als duidelijk onderwerp. Details zoals cockpit geven de set concrete functies of presentatiepunten. Daardoor is sneller duidelijk wat je in het model ziet en waarom het voor fans interessant is.
Onderdelen inventaris
| Onderdeel | Kleur | Aantal |
|---|---|---|
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Donkerblauwgrijs | 12× |
![]() Bar Holder with Clip 11090 | Donkerblauwgrijs | 2× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Zwart | 10× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Lichtblauwgrijs | 2× |
![]() Plate 3 x 3 11212 | Lichtblauwgrijs | 2× |
![]() Slope Curved 2 x 1 No Studs [1/2 Bow] 11477 | Donkerblauwgrijs | 4× |
![]() Slope Curved 2 x 1 No Studs [1/2 Bow] 11477 | Zwart | 18× |
![]() Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs] 13349 | Donkerblauwgrijs | 2× |
![]() Brick Curved 10 x 1 [Symmetric Inside Ridges] 13731 | Zwart | 4× |
![]() Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring 13971 | Rood | 2× |
10 van 294 onderdelen getoond
🔓 Meld je aan om alle onderdelen te zien| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Donkerblauwgrijs | 4× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 18× |
| Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs] | 13349 | Donkerblauwgrijs | 2× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Zwart | 4× |
| Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring | 13971 | Rood | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Geel | 3× |
| Tile Round 2 x 2 with Bottom Stud Holder with Red Circles Print | 14769pr1079 | Wit | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zwart | 5× |
| Projectile, Spring Shooter Ammunition 8L Bar | 15303 | Trans-Neon Orange | 3× |
| Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | 15400 | Donkerblauwgrijs | 2× |
| Plate Special 2 x 2 with Towball and Hole | 15456 | Zwart | 1× |
| Tile Round 2 x 2 with Hole | 15535 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Zwart | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Rood | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Zandkleur | 8× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Donkerblauwgrijs | 2× |
| Launcher, Brick Special 1 x 4 with Inside Clips (Disk Shooter) with Recessed Center 2 Studs | 16968 | Lichtblauwgrijs | 2× |
| Brick Round 2 x 2, Pin Holes with 6 Black Diamonds Print | 17485pr0002 | Rood | 1× |
| Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 18575 | Zwart | 2× |
| Launcher Trigger, Weapon Rapid Shooter, Flat Axle Hole | 18587 | Lichtblauwgrijs | 1× |
| Launcher, Weapon Rapid Shooter Six Barrel, 3 Fingers | 18588 | Zwart | 1× |
| Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 18653 | Zwart | 2× |
| Bracket 3 x 2 x 1 1/3 with Pin Bottom | 18671 | Donkerblauwgrijs | 2× |
| Technic Turntable Large Type 3 Top, 60 Tooth | 18938 | Zwart | 2× |
| Technic Turntable Large Type 3 Base | 18939 | Lichtblauwgrijs | 2× |
| Windscreen 8 x 4 x 2 with Handle and 2 Studs with Black Cockpit Window Frames | 21849pr0003 | Trans-geel | 1× |
| Tile Special 2 x 3 Pentagonal | 22385 | Zwart | 14× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Lichtblauwgrijs | 4× |
| Slope Inverted 45° 6 x 2 Double with 2 x 4 Cutout | 22889 | Zwart | 1× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Donkerblauwgrijs | 6× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Zwart | 4× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Rood | 2× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Lichtblauwgrijs | 10× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Roodbruin | 2× |
| Wedge Plate 3 x 6 Cut Corners | 2419 | Donkerblauwgrijs | 9× |
| Plate 2 x 2 Corner | 2420 | Lichtblauwgrijs | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Lichtblauwgrijs | 6× |
| Wedge Plate 2 x 2 Left | 24299 | Zwart | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Zwart | 1× |
| Tile 1 x 4 with Groove | 2431 | Donkerblauwgrijs | 2× |
| Tile 1 x 4 with Groove | 2431 | Zwart | 6× |
| Slope Inverted 75° 2 x 1 x 3 | 2449 | Zwart | 2× |
| Tile Special 2 x 2 with Top Pin | 2460 | Donkerblauwgrijs | 2× |
| Brick Special 1 x 4 with Groove | 2653 | Zwart | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-geel | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Wit | 1× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-oranje | 3× |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | 2780 | Zwart | 17× |
| Brick Special 1 x 2 with Grille | 2877 | Donkerblauwgrijs | 12× |
| Lever Small Base with Black Lever | 298c02 | Lichtblauwgrijs | 2× |
| Lever Small Base with Black Lever | 298c02 | Wit | 1× |
| Brick 2 x 4 | 3001 | Zwart | 4× |
| Brick 2 x 4 | 3001 | Zwart | 4× |
| Brick 2 x 4 | 3001 | Wit | 2× |
| Brick 2 x 3 | 3002 | Zwart | 3× |
| Brick 2 x 2 | 3003 | Zwart | 2× |
| Handlebars | 30031 | Donkerblauwgrijs | 1× |
| Brick 1 x 2 | 3004 | Zwart | 6× |
| Brick 1 x 2 | 3004 | Rood | 2× |
| Brick 1 x 2 | 3004 | Lichtblauwgrijs | 2× |
| Brick 1 x 2 | 3004 | Zwart | 4× |
| Brick 1 x 1 | 3005 | Zwart | 6× |
| Brick 1 x 1 | 3005 | Trans-oranje | 4× |
| Brick 1 x 1 | 3005 | Lichtblauwgrijs | 6× |
| Brick 2 x 8 | 3007 | Lichtblauwgrijs | 1× |
| Brick 1 x 8 | 3008 | Donkerblauwgrijs | 2× |
| Brick 1 x 6 | 3009 | Zwart | 3× |
| Brick 1 x 4 | 3010 | Donkerblauwgrijs | 1× |
| Plate 2 x 4 | 3020 | Zwart | 1× |
| Plate 2 x 4 | 3020 | Donkerblauwgrijs | 7× |
| Plate 2 x 4 | 3020 | Zwart | 7× |
| Plate 2 x 3 | 3021 | Roodbruin | 3× |
| Plate 2 x 3 | 3021 | Zwart | 3× |
| Plate 2 x 3 | 3021 | Donkerblauwgrijs | 8× |
| Plate 2 x 3 | 3021 | Lichtblauwgrijs | 2× |
| Plate 2 x 2 | 3022 | Lichtblauwgrijs | 3× |
| Plate 2 x 2 | 3022 | Roodbruin | 1× |
| Plate 2 x 2 | 3022 | Wit | 2× |
| Plate 2 x 2 | 3022 | Zwart | 3× |
| Plate 2 x 2 | 3022 | Zwart | 4× |
| Plate 1 x 2 | 3023 | Zwart | 22× |
| Plate 1 x 2 | 3023 | Trans-rood | 1× |
| Plate 1 x 2 | 3023 | Lichtblauwgrijs | 4× |
| Plate 1 x 2 | 3023 | Roodbruin | 6× |
| Brick Special 1 x 2 with Handle | 30236 | Zwart | 1× |
| Plate 1 x 1 | 3024 | Rood | 6× |
| Plate 1 x 1 | 3024 | Donkerblauwgrijs | 4× |
| Plate 1 x 1 | 3024 | Zwart | 22× |
| Plate 4 x 10 | 3030 | Zwart | 2× |
| Plate 4 x 4 | 3031 | Donkerblauwgrijs | 1× |
| Plate 4 x 4 | 3031 | Zwart | 2× |
| Plate 4 x 6 | 3032 | Zwart | 4× |
| Plate 2 x 8 | 3034 | Zwart | 1× |
| Plate 4 x 8 | 3035 | Donkerblauwgrijs | 2× |
| Plate 4 x 8 | 3035 | Lichtblauwgrijs | 1× |
| Plate 4 x 8 | 3035 | Zwart | 2× |
| Wedge Plate 6 x 12 Left | 30355 | Zwart | 1× |
| Wedge Plate 6 x 12 Right | 30356 | Zwart | 1× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Lichtblauwgrijs | 2× |
| Arm Mechanical with 2 Clips [Battle Droid] | 30377 | Donkerblauwgrijs | 4× |
| Slope 45° 2 x 3 | 3038 | Zwart | 4× |
| Slope 45? 2 x 2 | 3039 | Zwart | 2× |
| Slope 45? 2 x 2 | 3039 | Roodbruin | 1× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Donkerblauwgrijs | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Zwart | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Lichtblauwgrijs | 1× |
| Slope 45° 2 x 2 Double Convex | 3045 | Zwart | 2× |
| Slope 45° 2 x 2 Double Concave | 3046a | Zwart | 2× |
| Wedge Plate 8 x 8 Cut Corner | 30504 | Zwart | 2× |
| Tile 2 x 2 with Groove | 3068b | Donkerblauwgrijs | 2× |
| Tile 1 x 2 with Groove | 3069b | Donkerblauwgrijs | 5× |
| Tile 1 x 2 with Groove | 3069b | Zwart | 4× |
| Tile 1 x 2 with Groove | 3069b | Rood | 5× |
| Tile 1 x 1 with Groove | 3070b | Zwart | 4× |
| Tile 1 x 1 with Groove | 3070b | Donkerblauwgrijs | 8× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Donkerblauwgrijs | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Geel | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Wit | 4× |
| Plate Special 1 x 2 with Door Rail | 32028 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 2 with Door Rail | 32028 | Rood | 4× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Rood | 8× |
| Technic Axle 2 Notched | 32062 | Rood | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Rood | 2× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Lichtblauwgrijs | 2× |
| Technic Pin Double with Axle Hole | 32138 | Lichtblauwgrijs | 1× |
| Technic Driving Ring Extension, 4 Ridges | 32187 | Lichtblauwgrijs | 2× |
| Technic Ball Joint | 32474 | Lichtblauwgrijs | 2× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Lichtblauwgrijs | 3× |
| Slope 33° 3 x 2 | 3298 | Donkerblauwgrijs | 1× |
| Sticker Sheet for Set 70916-1 | 33908 | Unknown | 1× |
| Plate 1 x 8 | 3460 | Zwart | 2× |
| Plate 1 x 8 | 3460 | Rood | 4× |
| Plate 1 x 8 | 3460 | Zwart | 4× |
| Brick 1 x 3 | 3622 | Donkerblauwgrijs | 2× |
| Brick 1 x 3 | 3622 | Zwart | 2× |
| Plate 1 x 3 | 3623 | Geel | 6× |
| Plate 1 x 3 | 3623 | Zwart | 20× |
| Slope Inverted 45° 2 x 1 | 3665 | Wit | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Geel | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Zwart | 8× |
| Plate 1 x 6 | 3666 | Lichtblauwgrijs | 7× |
| Plate 1 x 6 | 3666 | Zwart | 16× |
| Slope 33° 3 x 3 Double Convex | 3675 | Zwart | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Zwart | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Rood | 3× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Lichtblauwgrijs | 1× |
| Technic Axle 4 | 3705 | Rood | 1× |
| Technic Axle 8 | 3707 | Rood | 1× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Wit | 1× |
| Plate 1 x 4 | 3710 | Zwart | 14× |
| Plate 1 x 4 | 3710 | Geel | 2× |
| Plate 1 x 4 | 3710 | Rood | 4× |
| Plate 1 x 4 | 3710 | Zwart | 2× |
| Plate 1 x 4 | 3710 | Donkerblauwgrijs | 3× |
| Technic Plate 2 x 8 [7 Holes] | 3738 | Lichtblauwgrijs | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove (Jumper) | 3794b | Zandkleur | 2× |
| Plate 2 x 6 | 3795 | Zwart | 4× |
| Plate 2 x 6 | 3795 | Wit | 1× |
| Plate 2 x 6 | 3795 | Rood | 1× |
| Plate 2 x 10 | 3832 | Zwart | 1× |
| Plate 6 x 6 | 3958 | Zwart | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Zwart | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Geel | 1× |
| Brick Special 1 x 1 with Headlight | 4070 | Lichtblauwgrijs | 4× |
| Brick Special 1 x 1 with Headlight | 4070 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Rood | 2× |
| Tile 1 x 8 with Groove | 4162 | Donkerblauwgrijs | 2× |
| Technic Beam 1 x 2 Thin | 41677 | Donkerblauwgrijs | 2× |
| Wedge Curved 6 x 2 Right, Inner Ridges | 41747 | Zwart | 1× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Zwart | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Zwart | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Zwart | 1× |
| Technic Wedge Belt Wheel [aka Pulley] | 4185 | Donkerblauwgrijs | 4× |
| Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings | 41854 | Zwart | 1× |
| Brick Curved 6 x 1 Inverted | 42023 | Donkerblauwgrijs | 2× |
| Wedge Curved 12 x 3 Right | 42060 | Zwart | 1× |
| Wedge Curved 12 x 3 Left | 42061 | Zwart | 1× |
| Technic Pin 1/2 | 4274 | Zwart | 6× |
| Technic Pin 1/2 | 4274 | Lichtblauwgrijs | 7× |
| Slope 33° 3 x 1 | 4286 | Zwart | 1× |
| Slope 33° 3 x 1 | 4286 | Donkerblauwgrijs | 2× |
| Slope 33° 3 x 1 | 4286 | Rood | 1× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 6× |
| Wedge Plate 3 x 2 Right | 43722 | Zwart | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Donkerblauwgrijs | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Donkerblauwgrijs | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Zwart | 1× |
| Technic Beam 1 x 2 Thick | 43857 | Lichtblauwgrijs | 1× |
| Technic Rotation Joint Disk with Pin Hole and 3L Beam Thick | 44224 | Donkerblauwgrijs | 2× |
| Technic Rotation Joint Disk with Pin and 3L Beam Thick | 44225 | Lichtblauwgrijs | 2× |
| Technic Axle 7 | 44294 | Lichtblauwgrijs | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | 44301b | Lichtblauwgrijs | 6× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth | 44302a | Donkerblauwgrijs | 6× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Donkerblauwgrijs | 6× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Lichtblauwgrijs | 4× |
| Plate 1 x 10 | 4477 | Zwart | 2× |
| Plate 1 x 10 | 4477 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 8 with Door Rail | 4510 | Rood | 2× |
| Plate Special 2 x 2 with Wheel Holders | 4600 | Zwart | 2× |
| Wheel 8 x 6 | 4624 | Lichtblauwgrijs | 4× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Trans-paars | 2× |
| Cone 4 x 4 x 2 Hollow No Studs | 4742 | Donkerblauwgrijs | 2× |
| Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 47458 | Zwart | 1× |
| Plate Special 2 x 2 with Wheels Holder Wide - Technic Pins | 47720 | Zwart | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Lichtblauwgrijs | 1× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Zwart | 8× |
| Wedge Plate 8 x 3, 22° Right | 50304 | Zwart | 1× |
| Wedge Plate 8 x 3, 22° Right | 50304 | Donkerblauwgrijs | 1× |
| Wedge Plate 8 x 3, 22° Left | 50305 | Donkerblauwgrijs | 1× |
| Wedge Plate 8 x 3, 22° Left | 50305 | Zwart | 1× |
| Slope Curved 3 x 1 No Studs | 50950 | Zwart | 2× |
| Wedge Curved 10 x 3 Left | 50955 | Zwart | 1× |
| Wedge Curved 10 x 3 Right | 50956 | Zwart | 1× |
| Wedge Plate 2 x 4 | 51739 | Lichtblauwgrijs | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Rood | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Trans-geel | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 1× |
| Wedge Plate 6 x 3 Right | 54383 | Zwart | 2× |
| Wedge Plate 6 x 3 Left | 54384 | Zwart | 2× |
| Technic Axle 8 with Stop | 55013 | Donkerblauwgrijs | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Lichtblauwgrijs | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Rood | 3× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Zwart | 4× |
| Tyre 14 x 4 Smooth Small Single [New Style] | 59895 | Zwart | 4× |
| Cone 1 x 1 [Top Groove] | 59900 | Metallic zilver | 4× |
| Slope Inverted 45° 6 x 4 Double with 4 x 4 Recessed and 3 Holes | 60219 | Zwart | 5× |
| Slope 18° 4 x 1 | 60477 | Zwart | 8× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Lichtblauwgrijs | 2× |
| Plate 1 x 12 | 60479 | Zwart | 2× |
| Window 1 x 4 x 3 without Shutter Tabs | 60594 | Donkerblauwgrijs | 1× |
| Wedge Plate 6 x 6 Cut Corner | 6106 | Zwart | 8× |
| Brick 1 x 10 | 6111 | Zwart | 2× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Donkerblauwgrijs | 12× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-geel | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-oranje | 7× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rood | 12× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Donkerblauwgrijs | 10× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Zwart | 6× |
| Panel 1 x 1 x 1 Corner | 6231 | Zwart | 8× |
| Technic Pin Connector Round [Slotted] | 62462 | Lichtblauwgrijs | 2× |
| Tile 1 x 3 | 63864 | Donkerblauwgrijs | 8× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Lichtblauwgrijs | 2× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Donkerblauwgrijs | 2× |
| Bar 6L with Stop Ring | 63965 | Lichtblauwgrijs | 2× |
| Bar 6L with Stop Ring | 63965 | Wit | 1× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Geel | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Rood | 6× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Wit | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Zwart | 4× |
| Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | 6558 | Zwart | 9× |
| Gearbox 4 x 4 x 1 2/3 with 1 x 2 Cutouts, Pin Holes | 6585 | Zwart | 1× |
| Technic Gear 12 Tooth Bevel | 6589 | Zandkleur | 2× |
| Tile 1 x 6 with Groove | 6636 | Donkerblauwgrijs | 4× |
| Plate Round 1 x 1 with Open Stud | 85861 | Lichtblauwgrijs | 4× |
| Technic Pin Connector Double with Bar [2 Holes] | 85940 | Zwart | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Roodbruin | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Donkerblauwgrijs | 9× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zwart | 5× |
| Tile 2 x 4 with Groove | 87079 | Roodbruin | 1× |
| Tile 2 x 4 with Groove | 87079 | Zwart | 4× |
| Technic Axle 4 with Stop | 87083 | Donkerblauwgrijs | 1× |
| Technic Gear 20 Tooth Bevel with Pin Hole | 87407 | Lichtblauwgrijs | 2× |
| Plate Special 3 x 4 with 1 x 4 Center Studs [Plain] | 88646 | Zwart | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Zwart | 1× |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 90194 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 [Top Clip] | 92280 | Lichtblauwgrijs | 4× |
| Wedge Plate 10 x 10 Cut Corner [No Centre Studs] | 92584 | Zwart | 2× |
| Plate Special 1 x 4 with 2 Studs | 92593 | Lichtblauwgrijs | 1× |
| Plate Special 1 x 2 with Angled Handles on Side | 92692 | Wit | 1× |
| Brick Round 2 x 2 [Grill] | 92947 | Zwart | 2× |
| Brick Arch 1 x 6 Raised Arch | 92950 | Zwart | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Zwart | 3× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Donkerblauwgrijs | 2× |
| Brick and Axle Separator v2.0 | 96874 | Oranje | 1× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Lichtblauwgrijs | 4× |
| Tile Round 1 x 1 | 98138 | Trans-paars | 2× |
| Tile Round 1 x 1 | 98138 | Trans-rood | 8× |
| Tile Round 1 x 1 | 98138 | Trans-groen | 3× |
| Tile Round 1 x 1 | 98138 | Trans-geel | 10× |
| Tile Round 1 x 1 | 98138 | Trans-doorzichtig | 4× |
| Hinge Plate 2 x 4 with Pin Hole with 3 Holes - Bottom | 98285 | Lichtblauwgrijs | 1× |
| Hinge Plate 2 x 4 with Pin Hole - Top | 98286 | Lichtblauwgrijs | 1× |
| Equipment Winder Key [Toy] | 98375 | Mat zilver | 1× |
| Weapon Batarang | 98721 | Zwart | 1× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Zwart | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Lichtblauwgrijs | 18× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Zwart | 13× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Lichtblauwgrijs | 5× |
Bouw-DNA
Onderdeleninzichten voor The Batwing
Met 1.053 onderdelen zit deze build +42% ten opzichte van de gemiddelde Batman set en +175% ten opzichte van de gemiddelde release uit 2017.
T.o.v. gemiddelde Batman set
Gemiddelde Batman set: 744 onderdelen over 40 andere sets.
T.o.v. gemiddelde set uit 2017
Gemiddelde set uit 2017: 383 onderdelen over 450 andere sets.
Kleurprofiel
Dominante kleur
Zwart
Unieke onderdelen
5 onderdelen per uniek type
Herhalingsfactor
Gemiddeld aantal onderdelen per uniek type.
Meest gebruikte onderdeel
Plate 1 x 2
33xResultaten zijn gebaseerd op officiële LEGO onderdelen inventarissen. Nauwkeurigheid verbetert naarmate je set compleetheid bevestigt.
Deze site is niet gelieerd aan of goedgekeurd door de LEGO Groep.
![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6047417.jpg)

![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037746.jpg)


![Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6029948.jpg)
![Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6047276.jpg)
![Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs]](https://cdn.rebrickable.com/media/parts/elements/6079036.jpg)
![Brick Curved 10 x 1 [Symmetric Inside Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037664.jpg)
