


De Ninjago Destiny's Bounty (71705-1) is een 1783-delig model dat het vlaggenschip van de ninja's voorstelt. Deze bouwset bevat zeven ninja-actiefiguren; Wu, Kai, Zane en Cole behoren hiertoe. Als een bijgewerkte weergave van het vaartuig uit seizoen 1 van de tv-serie, is deze Destiny's Bounty een interactieve bouwset. Het schip beschikt over meerdere toegankelijke dekken, inclusief een goed uitgeruste brugsectie en diverse wapens aan boord. Een inzetbaar anker is eveneens geïntegreerd. De constructie van de set maakt het mogelijk om alle zeven minifiguren te positioneren door het interieur en de dekgebieden van het schip. Opvallende bouwdetails zijn de ingewikkelde van stenen gebouwde zeilen en de SNOT-technieken die gebruikt zijn voor het vormen van de romp.
Onderdelen inventaris
| Onderdeel | Kleur | Aantal |
|---|---|---|
![]() Technic Gear 8 Tooth [Reinforced] 10928 | Donkerblauwgrijs | 4× |
![]() Bar Holder with Clip 11090 | Zwart | 2× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Roodbruin | 12× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Donkerrood | 1× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Rood | 2× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Lichtblauwgrijs | 4× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Zwart | 6× |
![]() Plate Round 6 x 6 with Hole 11213 | Zwart | 4× |
![]() Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom 11215 | Zwart | 1× |
![]() Plate Special 1 x 2 with Clip Horizontal on Side 11476 | Zwart | 15× |
10 van 484 onderdelen getoond
🔓 Meld je aan om alle onderdelen te zien| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Lichtblauwgrijs | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Zwart | 6× |
| Plate Round 6 x 6 with Hole | 11213 | Zwart | 4× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Zwart | 1× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Zwart | 15× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Lichtblauwgrijs | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Donkerrood | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 14× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Rood | 4× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Roodbruin | 2× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Rood | 8× |
| Brick Arch 1 x 3 x 3 [Gothic] | 13965 | Roodbruin | 6× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Lichtblauwgrijs | 3× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Zandkleur | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Roodbruin | 2× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 15100 | Donkerblauwgrijs | 3× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Lichtblauwgrijs | 2× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Rood | 8× |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 15208 | Zandkleur | 2× |
| Tile Special 1 x 2 with Two Vertical Teeth / Tooth | 15209 | Rood | 1× |
| Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version] | 15254 | Lichtblauwgrijs | 1× |
| Fence Spindled 1 x 4 x 2 [4 Top Studs] | 15332 | Zwart | 2× |
| Launcher Trigger, Weapon Gun Trigger | 15392 | Donkerblauwgrijs | 1× |
| Launcher, Plate Special 1 x 2 with Mini Blaster | 15403 | Zwart | 1× |
| Plate Round 1 x 1 Swirled Top | 15470 | Parel goud | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Donkerblauwgrijs | 3× |
| Tile Round 2 x 2 with Hole | 15535 | Donker zandkleur | 1× |
| Tile Round 2 x 2 with Hole with Turbine print | 15535pr0001 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Rood | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Roodbruin | 14× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Donkerrood | 5× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Zandkleur | 2× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Zwart | 6× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Roodbruin | 6× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Rood | 8× |
| Brick Arch 1 x 8 x 2 Raised | 16577 | Donkerblauwgrijs | 1× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Zwart | 1× |
| Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 18653 | Roodbruin | 10× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Wit | 1× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Lichtblauwgrijs | 2× |
| Windscreen 4 x 4 x 1 2/3 Canopy Half Sphere with Handle | 18990 | Trans-doorzichtig | 1× |
| Brick Special 1 x 1 with Scroll with Open Stud | 20310 | Roodbruin | 1× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Parel goud | 3× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Zwart | 3× |
| Fence Spindled 4 x 4 x 2 Quarter Round with 3 Studs | 21229 | Roodbruin | 2× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Oranje | 1× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Parel goud | 3× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Mat zilver | 5× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Rood | 12× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Lichtblauwgrijs | 6× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Donkerblauwgrijs | 2× |
| Bar Holder with Hole and Bar Handle | 23443 | Zwart | 2× |
| Brick 2 x 2 Corner | 2357 | Roodbruin | 2× |
| Brick 2 x 2 Corner | 2357 | Rood | 2× |
| Brick 2 x 2 Corner | 2357 | Zwart | 2× |
| Technic Axle 11 | 23948 | Lichtblauwgrijs | 2× |
| Technic Arm with Gear 8 Tooth and 1.5L Axle | 24014 | Lichtblauwgrijs | 2× |
| Large Figure Weapon Lightsaber Hilt with Axle Hole and Two Bar Holders | 24122 | Donker zandkleur | 1× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Donkerblauwgrijs | 8× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Donkerrood | 8× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Roodbruin | 4× |
| Wedge Plate 3 x 6 Cut Corners | 2419 | Zwart | 1× |
| Plate 2 x 2 Corner | 2420 | Donker zandkleur | 2× |
| Plate 2 x 2 Corner | 2420 | Zandkleur | 6× |
| Plate 2 x 2 Corner | 2420 | Lichtblauwgrijs | 2× |
| Plate 2 x 2 Corner | 2420 | Donkerblauwgrijs | 4× |
| Plate 2 x 2 Corner | 2420 | Lichtblauwgrijs | 2× |
| Plate 2 x 2 Corner | 2420 | Zwart | 16× |
| Plate 2 x 2 Corner | 2420 | Rood | 14× |
| Slope Curved 2 x 1 Inverted | 24201 | Zwart | 2× |
| Wedge Plate 2 x 2 Left | 24299 | Rood | 3× |
| Wedge Plate 2 x 2 Right | 24307 | Rood | 3× |
| Tile 1 x 4 with Groove | 2431 | Roodbruin | 8× |
| Tile 1 x 4 with Groove | 2431 | Rood | 6× |
| Tile 1 x 4 with Groove | 2431 | Donkerblauwgrijs | 2× |
| Plate 2 x 12 | 2445 | Zwart | 6× |
| Brick 2 x 6 | 2456 | Zwart | 1× |
| Brick Special 1 x 2 with Pin | 2458 | Lichtblauwgrijs | 2× |
| Tile Special 2 x 2 with Top Pin | 2460 | Donkerblauwgrijs | 1× |
| Plate Special 2 x 2 with Pin on Bottom | 2476a | Donker zandkleur | 7× |
| Weapon Sword / Saber with Curved Blade and Hilt | 25111 | Mat zilver | 1× |
| Tile Round 1 x 1 Quarter | 25269 | Rood | 2× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Zwart | 8× |
| Hat Conical Asian with Raised Center | 26007 | Parel goud | 3× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Roodbruin | 8× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Zwart | 14× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-doorzichtig | 7× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Zwart | 2× |
| Tile 2 x 3 | 26603 | Donkerblauwgrijs | 2× |
| Tile 2 x 3 | 26603 | Roodbruin | 1× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Roodbruin | 6× |
| Tile 4 x 4 Curved, Macaroni | 27507 | Zwart | 4× |
| Tile 4 x 4 Curved, Macaroni | 27507 | Roodbruin | 2× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Donkerrood | 8× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Parel goud | 4× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Donkerblauwgrijs | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Roodbruin | 16× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Donkerbruin | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Rood | 6× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Rood | 6× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Donkerbruin | 2× |
| Brick 2 x 4 | 3001 | Zwart | 1× |
| Brick 2 x 3 | 3002 | Roodbruin | 8× |
| Brick 1 x 2 | 3004 | Zandkleur | 8× |
| Brick 1 x 6 | 3009 | Lichtblauwgrijs | 2× |
| Brick Arch 1 x 5 x 4 Inverted | 30099 | Roodbruin | 2× |
| Brick 1 x 4 | 3010 | Zwart | 3× |
| Brick 1 x 4 | 3010 | Rood | 4× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Roodbruin | 6× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Donkerblauwgrijs | 6× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Lichtblauwgrijs | 3× |
| Plate Special / Shield Rectangular with 4 Studs, Handle | 30166 | Donkerrood | 1× |
| Plate 2 x 4 | 3020 | Zwart | 5× |
| Plate 2 x 4 | 3020 | Donker zandkleur | 2× |
| Plate 2 x 4 | 3020 | Donkerblauwgrijs | 6× |
| Plate 2 x 4 | 3020 | Wit | 1× |
| Plate 2 x 3 | 3021 | Lichtblauwgrijs | 6× |
| Plate 2 x 3 | 3021 | Zandkleur | 3× |
| Plate 2 x 3 | 3021 | Zwart | 3× |
| Plate 2 x 3 | 3021 | Roodbruin | 2× |
| Plate 2 x 2 | 3022 | Lichtblauwgrijs | 1× |
| Plate 2 x 2 | 3022 | Donkerblauwgrijs | 2× |
| Plate 2 x 2 | 3022 | Roodbruin | 2× |
| Plate 2 x 2 | 3022 | Zwart | 5× |
| Plate 1 x 2 | 3023 | Wit | 1× |
| Plate 1 x 2 | 3023 | Donkerblauwgrijs | 9× |
| Plate 1 x 2 | 3023 | Zandkleur | 19× |
| Plate 1 x 2 | 3023 | Zwart | 4× |
| Plate 1 x 2 | 3023 | Roodbruin | 30× |
| Plate 1 x 2 | 3023 | Zwart | 5× |
| Plate 1 x 2 | 3023 | Rood | 6× |
| Brick Special 1 x 2 with Handle | 30236 | Lichtblauwgrijs | 2× |
| Plate 1 x 1 | 3024 | Roodbruin | 8× |
| Plate 1 x 1 | 3024 | Zandkleur | 4× |
| Plate 1 x 1 | 3024 | Zwart | 2× |
| Plate 4 x 10 | 3030 | Zwart | 2× |
| Plate 4 x 6 | 3032 | Lichtblauwgrijs | 1× |
| Plate 2 x 8 | 3034 | Roodbruin | 1× |
| Plate 2 x 8 | 3034 | Zandkleur | 1× |
| Plate 2 x 8 | 3034 | Donker zandkleur | 2× |
| Plate 4 x 8 | 3035 | Zwart | 5× |
| Plate 4 x 8 | 3035 | Roodbruin | 2× |
| Plate 4 x 8 | 3035 | Zandkleur | 3× |
| Plate 4 x 8 | 3035 | Rood | 2× |
| Plate 6 x 8 | 3036 | Zwart | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Rood | 8× |
| Arm Mechanical with 2 Clips [Battle Droid] | 30377 | Zwart | 3× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Rood | 2× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Zwart | 2× |
| Plate Round Corner 4 x 4 | 30565 | Zwart | 2× |
| Plate Round Corner 4 x 4 | 30565 | Donkerrood | 2× |
| Plate Round Corner 4 x 4 | 30565 | Roodbruin | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Zwart | 6× |
| Brick Round 1 x 1 Open Stud | 3062b | Lichtblauwgrijs | 4× |
| Brick Round 1 x 1 Open Stud | 3062b | Wit | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Roodbruin | 2× |
| Tile 2 x 2 with Groove | 3068b | Donkerbruin | 3× |
| Tile 2 x 2 with Groove | 3068b | Lichtblauwgrijs | 1× |
| Tile 2 x 2 with Groove | 3068b | Donker zandkleur | 2× |
| Tile 1 x 2 with Groove | 3069b | Lichtblauwgrijs | 3× |
| Tile 1 x 2 with Groove | 3069b | Donkerrood | 4× |
| Tile 1 x 2 with Groove | 3069b | Zwart | 2× |
| Tile 1 x 2 with Groove | 3069b | Rood | 16× |
| Tile 1 x 2 with Groove | 3069b | Donkerbruin | 2× |
| Tile 1 x 2 with Groove | 3069b | Roodbruin | 12× |
| Tile 1 x 1 with Groove | 3070b | Roodbruin | 4× |
| Tile 1 x 1 with Groove | 3070b | Donkerblauwgrijs | 2× |
| Tile 1 x 1 with Groove | 3070b | Zwart | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Lichtblauwgrijs | 2× |
| Technic Pin 3/4 | 32002 | Zandkleur | 2× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Zwart | 10× |
| Technic Axle and Pin Connector Angled #5 - 112.5° | 32015 | Donkerblauwgrijs | 4× |
| Technic Axle and Pin Connector Angled #5 - 112.5° | 32015 | Roodbruin | 2× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Zwart | 6× |
| Technic Beam 1 x 5 Thin | 32017 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Roodbruin | 8× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Lichtblauwgrijs | 2× |
| Technic Axle 2 Notched | 32062 | Rood | 12× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Zwart | 1× |
| Technic Beam 1 x 7 Thin | 32065 | Zwart | 2× |
| Technic Axle 5 | 32073 | Geel | 4× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Geel | 7× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Lichtblauwgrijs | 8× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Lichtblauwgrijs | 6× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Zwart | 5× |
| Technic Axle and Pin Connector Perpendicular Double | 32291 | Donkerblauwgrijs | 4× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Donkerblauwgrijs | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Roodbruin | 2× |
| Technic Beam 1 x 3 Thick | 32523 | Zwart | 4× |
| Technic Beam 1 x 3 Thick | 32523 | Roodbruin | 1× |
| Technic Pin Long without Friction Ridges | 32556 | Zandkleur | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Zwart | 6× |
| Fence 1 x 4 x 2 Ornamental Asian Lattice Square with 4 Studs | 32932 | Zwart | 1× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Roodbruin | 6× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Rood | 4× |
| Food Hot Dog / Sausage | 33078 | Zwart | 3× |
| Food Hot Dog / Sausage | 33078 | Rood | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Lichtblauwgrijs | 8× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Roodbruin | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Zwart | 4× |
| Plate 1 x 8 | 3460 | Roodbruin | 3× |
| Plate 1 x 8 | 3460 | Rood | 9× |
| Plate 1 x 8 | 3460 | Zwart | 2× |
| Plate 1 x 8 | 3460 | Zandkleur | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Rood | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Roodbruin | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Roodbruin | 4× |
| Weapon Sword Hilt with Dragon Head | 36017 | Parel goud | 5× |
| Brick 1 x 3 | 3622 | Zandkleur | 8× |
| Brick 1 x 3 | 3622 | Roodbruin | 4× |
| Brick 1 x 3 | 3622 | Lichtblauwgrijs | 2× |
| Plate 1 x 3 | 3623 | Rood | 4× |
| Plate 1 x 3 | 3623 | Lichtblauwgrijs | 4× |
| Plate 1 x 3 | 3623 | Roodbruin | 4× |
| Plate 1 x 3 | 3623 | Zandkleur | 8× |
| Minifig Head [Plain] [Hollow Stud] | 3626c | Roodbruin | 1× |
| Technic Gear 24 Tooth [New Style with Single Axle Hole] | 3648b | Donkerblauwgrijs | 1× |
| Brick Arch 1 x 4 | 3659 | Rood | 4× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Zwart | 4× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Donkerbruin | 20× |
| Slope Inverted 45° 2 x 1 | 3665 | Roodbruin | 4× |
| Plate 1 x 6 | 3666 | Rood | 4× |
| Plate 1 x 6 | 3666 | Zwart | 8× |
| Plate 1 x 6 | 3666 | Donkerblauwgrijs | 4× |
| Plate 1 x 6 | 3666 | Roodbruin | 1× |
| Slope Inverted 45° 2 x 2 Double Convex | 3676 | Donkerblauwgrijs | 4× |
| Turntable 2 x 2 Plate - Top | 3679 | Lichtblauwgrijs | 6× |
| Turntable 2 x 2 Plate, Base | 3680 | Rood | 4× |
| Turntable 2 x 2 Plate, Base | 3680 | Zwart | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Zwart | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Roodbruin | 1× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Roodbruin | 4× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Lichtblauwgrijs | 2× |
| Technic Axle 6 | 3706 | Zwart | 7× |
| Technic Axle 12 | 3708 | Zwart | 4× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Zwart | 2× |
| Plate 1 x 4 | 3710 | Zwart | 2× |
| Plate 1 x 4 | 3710 | Zwart | 4× |
| Plate 1 x 4 | 3710 | Roodbruin | 4× |
| Plate 1 x 4 | 3710 | Donkerblauwgrijs | 2× |
| Plate 1 x 4 | 3710 | Rood | 6× |
| Technic Bush | 3713 | Rood | 2× |
| Technic Plate 2 x 8 [7 Holes] | 3738 | Lichtblauwgrijs | 1× |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | 3747b | Roodbruin | 2× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Zandkleur | 1× |
| Wave / Flame Small with Pin | 37775 | Trans-oranje | 1× |
| Plate 2 x 6 | 3795 | Zandkleur | 1× |
| Plate 2 x 6 | 3795 | Donkerblauwgrijs | 2× |
| Plate 2 x 6 | 3795 | Roodbruin | 2× |
| Hinge Brick 1 x 4 [Upper] | 3830 | Roodbruin | 2× |
| Hinge Brick 1 x 4 [Lower] | 3831 | Roodbruin | 2× |
| Plate 2 x 10 | 3832 | Zandkleur | 2× |
| Plate 2 x 10 | 3832 | Roodbruin | 2× |
| Plate 2 x 10 | 3832 | Zwart | 2× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Zwart | 5× |
| Hinge Brick 1 x 2 Base | 3937 | Lichtblauwgrijs | 1× |
| Hinge Brick 1 x 2 Base | 3937 | Zwart | 2× |
| Hinge Brick 1 x 2 Base | 3937 | Rood | 4× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Wit | 6× |
| Antenna 1 x 4 with Flat Top | 3957b | Zwart | 4× |
| Brick Special 2 x 4 with 3 Axle Holes | 39789 | Geel | 1× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Donkerblauwgrijs | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Geel | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Donkerbruin | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Rood | 4× |
| Brick Special 1 x 1 with Headlight | 4070 | Roodbruin | 6× |
| Plate Special 8 x 8 with Grille [Hole in Center] | 4151b | Donker zandkleur | 1× |
| Tile 1 x 8 with Groove | 4162 | Lichtblauwgrijs | 2× |
| Tile 1 x 8 with Groove | 4162 | Zwart | 1× |
| Tile 1 x 8 with Groove | 4162 | Roodbruin | 1× |
| Technic Beam 1 x 2 Thin | 41677 | Rood | 3× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Roodbruin | 4× |
| Wedge Curved 6 x 2 Right, Inner Ridges | 41747 | Rood | 2× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Rood | 2× |
| Wedge Curved Inverted 6 x 2 Right | 41764 | Donkerbruin | 2× |
| Wedge Curved Inverted 6 x 2 Left | 41765 | Donkerbruin | 2× |
| Wedge Plate 4 x 2 Right | 41769 | Zwart | 4× |
| Wedge Plate 4 x 2 Right | 41769 | Roodbruin | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Roodbruin | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Zwart | 4× |
| Brick Curved 6 x 1 | 42022 | Rood | 2× |
| Brick Curved 6 x 1 Inverted | 42023 | Zwart | 2× |
| Brick Curved 6 x 1 Inverted | 42023 | Rood | 2× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Donkerblauwgrijs | 2× |
| Slope 33° 3 x 1 | 4286 | Roodbruin | 2× |
| Slope Inverted 34° 3 x 1 with Internal Stopper | 4287b | Donkerpaars | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 8× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Rood | 1× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Rood | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Roodbruin | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Donkerrood | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Donkerrood | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Roodbruin | 1× |
| Technic Axle 7 | 44294 | Lichtblauwgrijs | 4× |
| Dish 6 x 6 Inverted (Radar) with Solid Studs | 44375b | Donkerrood | 2× |
| Plate 1 x 10 | 4477 | Donkerblauwgrijs | 3× |
| Plate 1 x 10 | 4477 | Zandkleur | 1× |
| Plate 1 x 10 | 4477 | Rood | 1× |
| Plate 1 x 10 | 4477 | Zwart | 3× |
| Technic Axle 3 | 4519 | Lichtblauwgrijs | 7× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Roodbruin | 1× |
| Boat Hull Section, Brick 10 x 12 x 1 with 4 x 6 Cutout | 47404 | Roodbruin | 2× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Rood | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Rood | 1× |
| Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 47458 | Rood | 1× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Roodbruin | 1× |
| Boat, Mast 2 x 2 x 20 with Holes - Side Aligned x shape Axle Hole, + Orientation | 48002a | Donkerbruin | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Rood | 2× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Rood | 2× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Zwart | 2× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Donkerblauwgrijs | 6× |
| Technic Axle Connector Hub with 4 Bars at 90° | 48723 | Roodbruin | 1× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | 48729b | Lichtblauwgrijs | 1× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | 48729b | Zwart | 2× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Zwart | 9× |
| Plate Special 1 x 1 with Tooth | 49668 | Zandkleur | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Lichtblauwgrijs | 1× |
| Slope Curved 3 x 1 No Studs | 50950 | Donkerbruin | 2× |
| Wedge Curved 10 x 3 Left | 50955 | Rood | 2× |
| Wedge Curved 10 x 3 Right | 50956 | Rood | 2× |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 53540 | Donkerblauwgrijs | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Rood | 10× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Roodbruin | 16× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Donkerblauwgrijs | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Rood | 1× |
| Wedge Plate 6 x 3 Right | 54383 | Zwart | 3× |
| Wedge Plate 6 x 3 Left | 54384 | Zwart | 3× |
| Technic Axle 8 with Stop | 55013 | Donkerblauwgrijs | 1× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Lichtblauwgrijs | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Roodbruin | 4× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Rood | 3× |
| Cone 1 x 1 [Top Groove] | 59900 | Parel goud | 13× |
| Cone 1 x 1 [Top Groove] | 59900 | Zwart | 4× |
| Cone 1 x 1 [Top Groove] | 59900 | Lichtblauwgrijs | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Roodbruin | 18× |
| Window 1 x 2 x 2 Plane, Hollow Studs, Single Hole Top and Bottom for Glass | 60032 | Wit | 1× |
| Chain 16L [21 Links] | 60169 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Zwart | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Zwart | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Rood | 6× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Donkerblauwgrijs | 2× |
| Slope 65° 2 x 1 x 2 | 60481 | Roodbruin | 2× |
| Brick Curved 2 x 4 x 1 1/3 | 6081 | Lichtblauwgrijs | 2× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Rood | 22× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Donkerrood | 2× |
| Brick 1 x 10 | 6111 | Zwart | 1× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Rood | 6× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Zwart | 2× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Zwart | 7× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Zwart | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Zwart | 10× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Roodbruin | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rood | 8× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Zandkleur | 15× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Parel goud | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Mat zilver | 3× |
| Container Box 2 x 2 x 2 - Top Opening | 61780 | Roodbruin | 1× |
| Brick Arch 1 x 6 x 2 Curved Top | 6183 | Zwart | 2× |
| Technic Universal Joint 3L [Complete Assembly] | 61903 | Lichtblauwgrijs | 2× |
| Panel 1 x 1 x 1 Corner | 6231 | Lichtblauwgrijs | 4× |
| Technic Pin Connector Round [Slotted] | 62462 | Roodbruin | 1× |
| Tile 1 x 3 | 63864 | Wit | 2× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Roodbruin | 12× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Rood | 4× |
| Bar 6L with Stop Ring | 63965 | Roodbruin | 1× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Parel goud | 3× |
| Bracket 2 x 6 - 1 x 6 Inverted | 64570 | Zandkleur | 2× |
| Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3 | 64644 | Donkerbruin | 1× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Zwart | 4× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Zwart | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Zwart | 1× |
| Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | 6558 | Zwart | 9× |
| Technic Axle 3 with Stud | 6587 | Donker zandkleur | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball | 6628 | Zwart | 13× |
| Technic Beam 1 x 3 Thin | 6632 | Donkerblauwgrijs | 18× |
| Technic Beam 1 x 3 Thin | 6632 | Zwart | 3× |
| Tile 1 x 6 with Groove | 6636 | Donker zandkleur | 2× |
| Tile 1 x 6 with Groove | 6636 | Donkerblauwgrijs | 1× |
| Tile 1 x 6 with Groove | 6636 | Donkerrood | 1× |
| Tile 1 x 6 with Groove | 6636 | Rood | 2× |
| Tile 1 x 6 with Groove | 6636 | Zandkleur | 4× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Donkerrood | 1× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Zwart | 1× |
| Sticker Sheet for Set 71705-1 | 67942 | Unknown | 1× |
| Sail 27 x 20 with Dark Tan/Red Lines print (Destiny Bounty) | 68806 | Zandkleur | 1× |
| Sail 27 x 20 with Dark Tan/Red Lines print (Destiny Bounty) | 68862 | Zandkleur | 1× |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | 73983 | Zwart | 4× |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | 73983 | Rood | 6× |
| Hose Rigid 3mm D. 12L / 9.6cm | 75c12 | Parel goud | 2× |
| Hose Rigid 3mm D. 14L / 11.2cm | 75c14 | Roodbruin | 2× |
| Plate Round 1 x 1 with Open Stud | 85861 | Parel goud | 3× |
| Plate Round 1 x 1 with Open Stud | 85861 | Zwart | 6× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Donkerblauwgrijs | 3× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Roodbruin | 33× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Lichtblauwgrijs | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Rood | 4× |
| Tile 2 x 4 with Groove | 87079 | Zandkleur | 4× |
| Tile 2 x 4 with Groove | 87079 | Donkerblauwgrijs | 1× |
| Tile 2 x 4 with Groove | 87079 | Roodbruin | 5× |
| Tile 2 x 4 with Groove | 87079 | Zwart | 5× |
| Tile 2 x 4 with Groove | 87079 | Rood | 2× |
| Brick Round 4 x 4 Centre Hole | 87081 | Wit | 1× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Donkerblauwgrijs | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Roodbruin | 2× |
| Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 1 Support Wall on Bottom | 87609 | Rood | 5× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Rood | 2× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Zwart | 1× |
| Brick Arch 1 x 3 x 2 | 88292 | Roodbruin | 4× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Rood | 2× |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 90194 | Donkerblauwgrijs | 1× |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 90194 | Donkerrood | 1× |
| Plate Special 1 x 2 [Top Clip] | 92280 | Rood | 2× |
| Chain 6L [5 Links] | 92338 | Donkerblauwgrijs | 2× |
| Chain 6L [5 Links] | 92338 | Parel goud | 1× |
| Door Grill 1 x 4 x 6 | 92589 | Pearl Titanium | 1× |
| Plate Special 1 x 4 with 2 Studs | 92593 | Roodbruin | 4× |
| Plate Special 1 x 4 with 2 Studs | 92593 | Zwart | 2× |
| Plate Special 1 x 4 with 2 Studs | 92593 | Donker zandkleur | 1× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Lichtblauwgrijs | 1× |
| Brick Arch 1 x 6 Raised Arch | 92950 | Roodbruin | 9× |
| Weapon Sword Katana with Dragon Guard (The Sword of Fire) | 93055 | Parel goud | 1× |
| Weapon Throwing Star / Shuriken with Textured Grips | 93058b | Mat zilver | 2× |
| Weapon Throwing Star / Shuriken with Textured Grips | 93058b | Parel goud | 2× |
| Hat, Conical Asian Style | 93059 | Zandkleur | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Roodbruin | 3× |
| Arm Skeleton [Bent / 2 Clips] | 93609 | Zwart | 2× |
| Brick Round Corner 6 x 6 with 33° Slope and Facet Cutout | 95188 | Rood | 2× |
| Brick and Axle Separator v2.0 | 96874 | Oranje | 1× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Zwart | 4× |
| Tile Round 1 x 1 | 98138 | Lichtblauwgrijs | 2× |
| Weapon Sai | 98139 | Mat zilver | 1× |
| Weapon Scythe / Crescent Blade Serrated with Bar | 98141 | Parel goud | 1× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Donkerrood | 2× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Zwart | 10× |
| Technic Turntable Small Top | 99009 | Lichtblauwgrijs | 2× |
| Technic Turntable Small Base, 28 Tooth | 99010 | Zwart | 2× |
| Pneumatic Hose Connector with Axle Connector | 99021 | Donkerblauwgrijs | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Zwart | 6× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Wit | 7× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Rood | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Rood | 3× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Zwart | 14× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Zwart | 18× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Donkerblauwgrijs | 7× |
| Hips and Black Legs with Orange/Black Sash, Knee Bands | 970c03pr1603 | Zwart | 1× |
| Torso Mesh Shirt, Gold Dragon Print, Black Arms and Hands | 973c03h03pr4513 | Zwart | 1× |
| Wrap with Long Back Knot, Dark Brown Band Pattern | 40925pat0004 | Zwart | 1× |
| Minifig Neckwear Shoulder Guard | 41162 | Parel goud | 1× |
| Minifig Head Cole, Bushy Eyebrows, Smile / Angry Print | 3626cpr2258 | Geel | 1× |
| Hips and Blue Legs with Dark Blue Sash, Knee Bands, Black Trim | 970c28pr1606 | Zwart | 1× |
| Torso Robe, Black Trim, Gold Dragon Print, Blue Arms, Black Hands | 973c28h03pr4516 | Zwart | 1× |
| Wrap with Long Back Knot, Dark Blue Band Pattern | 40925pat0002 | Zwart | 1× |
| Minifig Head Jay, Reddish Brown Eyebrows and Freckles, Lopsided Grin / Frown Print | 3626cpr2257 | Geel | 1× |
| Hips and Red Legs with Dark Red Sash, Knee Bands, Gold Trim | 970c22pr1604 | Rood | 1× |
| Torso Robe, Dark Red Shirt, Black Trim, Gold Dragon Print, Red Arms, Black Hands | 973c22h03pr4515 | Rood | 1× |
| Wrap with Long Back Knot, Dark Red Band Pattern | 40925pat0001 | Rood | 1× |
| Minifig Head Kai, Reddish Brown Eyebrows, Medium Nougat Scar, Bandage, Lopsided Grin with Teeth / Determined Print | 3626cpr9975 | Geel | 1× |
| Hood, Connected Chin | 30381 | Zwart | 1× |
| Legs Short | 41879a | Zwart | 1× |
| Neckwear Cape, Rounded Hem, Very Short [Spongy Stretchable Fabric] | 68865 | Zwart | 1× |
| Torso Muscles, Lime '5', Purple Belt Print, Black Arms and Hands | 973c03h03pr5173 | Zwart | 1× |
| Minifig Head Lloyd, Greens Eyes, Reddish Brown Eyebrows, Smirk / Scared Print | 3626cpr3268 | Geel | 1× |
| Hips and Black Legs with Robe, Asian Symbols | 970c03pr1610 | Zwart | 1× |
| Torso Robe, White Shirt, Asian Symbols Print, White Arms, Yellow Hands | 973c27h01pr4523 | Zwart | 1× |
| Minifig Neckwear Beard, Fancy | 93069 | Wit | 1× |
| Minifig Head Sensei Wu (Master), White and Gray Raised Eyebrows and Goatee, Dark Orange Wrinkles, Calm Expression Print | 3626cpr2382 | Geel | 1× |
| Helmet Ninja, Samurai | 98128 | Zwart | 1× |
| Hips and Dark Red Legs with Tan Sash/Belt Armour Plating, Steel Toes | 970c10pr1599 | Donkerrood | 1× |
| Bucket 1 x 1 x 1 Handle | 95344 | Parel goud | 1× |
| Headwear Accessory Visor / Chin Guard | 98129 | Rood | 1× |
| Minifig Neckwear Armor with Dual Layer Shoulder Pads | 35635 | Rood | 1× |
| Torso Armour, Gold Trim, Black Undershirt Print, Dark Red Arms, Black Hands | 973c10h03pr5310 | Rood | 1× |
| Minifig Head Nya, Eyebrows, Beauty Mark, Dark Tan Lips, Crooked Smile / Open Mouth Smile Print | 3626cpr9888 | Geel | 1× |
| Hips and White Legs with Light Bluish Grey Sash, Knee Bands, Black Trim | 970c27pr1612 | Wit | 1× |
| Torso Robe, White Bands, Black Trim, Gold Dragon Print, White Arms, Black Hands | 973c27h03pr4525 | Wit | 1× |
| Wrap with Long Back Knot, Light Bluish Gray Band Pattern | 40925pat0003 | Wit | 1× |
| Minifig Head Zane, Straight Eyebrows, Medium Blue Eyes, Smile / Scowl Print | 3626cpr9976 | Geel | 1× |
Bouw-DNA
Onderdeleninzichten voor Destiny's Bounty
Met 1.783 onderdelen zit deze build +291% ten opzichte van de gemiddelde Ninjago set en +301% ten opzichte van de gemiddelde release uit 2020.
T.o.v. gemiddelde Ninjago set
Gemiddelde Ninjago set: 456 onderdelen over 408 andere sets.
T.o.v. gemiddelde set uit 2020
Gemiddelde set uit 2020: 445 onderdelen over 450 andere sets.
Kleurprofiel
Dominante kleur
Zwart
Unieke onderdelen
5.6 onderdelen per uniek type
Herhalingsfactor
Gemiddeld aantal onderdelen per uniek type.
Meest gebruikte onderdeel
Plate 1 x 2
74xResultaten zijn gebaseerd op officiële LEGO onderdelen inventarissen. Nauwkeurigheid verbetert naarmate je set compleetheid bevestigt.
Deze site is niet gelieerd aan of goedgekeurd door de LEGO Groep.
![Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg)

![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6045941.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6042953.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6045937.jpg)




