| Plate Special 1 x 2 with Angled Handles on Side | 92692 | Zwart | 2× |
| Tile Special 2 x 2 Inverted | 11203 | Zwart | 1× |
| Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | 75937 | Zwart | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 8× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zwart | 4× |
| Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | 40379 | Zwart | 1× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Zwart | 1× |
| LIGHT SWORD - BLADE | 21462 | Zwart | 1× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Zwart | 8× |
| WALL ELEMENT 1X2X1 | 26169 | Zwart | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Zwart | 1× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Zwart | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 19× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Zwart | 1× |
| PLATE 1X2 W. STUB/VERTICAL | 49716 | Zwart | 1× |
| Horn with Shaft | 88513 | Zwart | 11× |
| FLAT TILE 1X1, ROUND | 35381 | Zwart | 4× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Zwart | 2× |
| BRICK 2X2 Ø4.85 VERTIC. SNAP | 48454 | Zwart | 2× |
| Technic Rotation Joint Disk with Pin and Double Rotation Joint Ball Half | 79505 | Zwart | 2× |
| Animal Body Part / Plant, Tail / Trunk / Tentacle / Tongue / Vine / Tree Branch (Long Tip) | 80497 | Zwart | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Zwart | 2× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Zwart | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Zwart | 2× |
| PLATE 2X2 W. BALL | 3768 | Zwart | 4× |
| Plate Angled 2 x 2 with Step and Hole in Center | 79846 | Zwart | 3× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Zwart | 1× |
| Plate 2 x 3 with 1 x 1 Cutout | 73831 | Zwart | 2× |
| BRICK 2X2 W/ BALL Ø 10.2 | 57909 | Zwart | 2× |
| Bracket 5 x 2 x 1 1/3 with Bottom Stud Holder | 79180 | Zwart | 3× |
| Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin Holes | 5717 | Zwart | 1× |
| Technic Axle 4 | 3705 | Zwart | 2× |
| Technic Axle 6 | 3706 | Zwart | 6× |
| Technic Axle 2 Notched | 32062 | Zwart | 6× |
| Technic Ball Joint with Through Axle Hole | 53585 | Zwart | 6× |
| ANGLE ELEMENT, 157,5 DEGR. [3] | 42128 | Zwart | 12× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Zwart | 7× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Zwart | 2× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Zwart | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Zwart | 1× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Zwart | 2× |
| Fric. element, cylinder | 65443 | Zwart | 2× |
| Technic Steering Arm 3 x 1 with Towball Socket | 5997 | Zwart | 2× |
| Brick 2 x 2 | 3003 | Zandkleur | 3× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Zandkleur | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Zandkleur | 3× |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 15208 | Zandkleur | 1× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Zandkleur | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Zandkleur | 3× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Zwart | 4× |
| Plate 2 x 4 | 3020 | Oranje | 1× |
| Plate 1 x 2 | 3023 | Oranje | 10× |
| Wedge Plate 3 x 2 Right | 43722 | Oranje | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Oranje | 2× |
| Slope Curved 3 x 1 No Studs | 50950 | Oranje | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Oranje | 1× |
| Plate 2 x 2 Corner | 2420 | Oranje | 8× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Oranje | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Oranje | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Oranje | 1× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Oranje | 4× |
| Slope Double 45° 1 x 1 | 35464 | Oranje | 1× |
| ELEMENT SEPARATOR | 31510 | Oranje | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Oranje | 8× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Oranje | 2× |
| Brick 1 x 2 | 3004 | Rood | 4× |
| Plate 2 x 4 | 3020 | Rood | 2× |
| ROUND BRICK 1X1 | 3062 | Rood | 2× |
| Plate 1 x 4 | 3710 | Rood | 5× |
| Plate 2 x 6 | 3795 | Rood | 4× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Rood | 6× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Rood | 5× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Rood | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Rood | 8× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Rood | 18× |
| Slope Curved 3 x 2 No Studs | 24309 | Rood | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Rood | 12× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Rood | 1× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Rood | 1× |
| FRONT 4X3X2/3, W/ BOW | 31584 | Rood | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Rood | 2× |
| PLATE 1X2 W. VERTICAL SCHAFT | 43876 | Rood | 2× |
| PLATE 1X2 W/STUB VERTICAL/END | 49715 | Rood | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Rood | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Rood | 2× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Rood | 8× |
| PLATE 1X2 W. 1 HORIZONTAL SNAP | 65458 | Rood | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Rood | 4× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Rood | 1× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Rood | 6× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Rood | 4× |
| BRICK 2X2 Ø4.85 HORIZ. SNAP | 48442 | Rood | 2× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Rood | 2× |
| Hair, Mid Length with Bun | 5311 | Rood | 1× |
| BRICK 1X4, W/ BOW | 7562 | Rood | 6× |
| Technic Axle 2 Notched | 32062 | Rood | 12× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Rood | 1× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rood | 10× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Rood | 4× |
| MINI HEAD, NO. 3991 | 102863 | Geel | 1× |
| MINI HEAD, NO. 3985 | 104190 | Geel | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Limoen | 1× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Limoen | 1× |
| Brick Special 1 x 2 with Grille | 2877 | Donkerblauwgrijs | 2× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Donkerblauwgrijs | 2× |
| Plate 2 x 3 | 3021 | Donkerblauwgrijs | 4× |
| FLAT TILE 2X2 | 3068 | Donkerblauwgrijs | 2× |
| Plate 1 x 6 | 3666 | Donkerblauwgrijs | 1× |
| Plate 2 x 2 | 3022 | Donkerblauwgrijs | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Donkerblauwgrijs | 3× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Donkerblauwgrijs | 6× |
| Plate Special 1 x 2 with 5.9mm Towball Socket and Towball | 14419 | Donkerblauwgrijs | 2× |
| ROOF TILE 1X2X2/3, ABS 'NO 2' | 19745 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 2 with End Towball | 22890 | Donkerblauwgrijs | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Donkerblauwgrijs | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Donkerblauwgrijs | 2× |
| Plate Special / Shield Rectangular with 4 Studs, Handle | 30166 | Donkerblauwgrijs | 2× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Donkerblauwgrijs | 3× |
| PLATE 1X4 SPLIT-LEVEL | 42505 | Donkerblauwgrijs | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Donkerblauwgrijs | 8× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Donkerblauwgrijs | 4× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Donkerblauwgrijs | 6× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Donkerblauwgrijs | 1× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Donkerblauwgrijs | 3× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Donkerblauwgrijs | 4× |
| 3.2 SHAFT W/ 5.9 BALL | 67692 | Donkerblauwgrijs | 3× |
| Plate Special 1 x 3 with 2 Clips on Top | 79987 | Donkerblauwgrijs | 2× |
| PLATE 1x2 W. HORIZONTAL HOLE Ø4,85 REV. | 28809 | Donkerblauwgrijs | 4× |
| Brick Special 1 x 2 x 1 1/3 with Rotation Joint Socket | 80431 | Donkerblauwgrijs | 4× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Donkerblauwgrijs | 2× |
| Technic Rotation Joint Disk with Pin Hole and 3L Beam Thick | 44224 | Donkerblauwgrijs | 2× |
| Technic Beam 1 x 2 with Ball Joint Angled | 50923 | Donkerblauwgrijs | 2× |
| Technic Axle 8 with Stop | 55013 | Donkerblauwgrijs | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Donkerblauwgrijs | 2× |
| Rotation Joint Socket with 2 Pins | 80563 | Donkerblauwgrijs | 2× |
| Minifig Neckwear Shoulder Guard with Hood and Katana Holder | 2188 | Donkerblauw | 1× |
| Minifig Neckwear Bandana (Ninjago) | 15619 | Helder groen | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 1× |
| PLATE 2X2 ROUND | 4032 | Lichtblauwgrijs | 12× |
| Brick Special 1 x 2 x 2/3 with Studs on Sides | 4595 | Lichtblauwgrijs | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Lichtblauwgrijs | 2× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Lichtblauwgrijs | 1× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Lichtblauwgrijs | 5× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Lichtblauwgrijs | 10× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Lichtblauwgrijs | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Lichtblauwgrijs | 1× |
| Technic Axle 3 | 4519 | Lichtblauwgrijs | 2× |
| CROSS BLOCK/FORM 2X2X2 | 42193 | Lichtblauwgrijs | 2× |
| FLEX JOINT 6M, Ø24, FEMALE | 65765 | Lichtblauwgrijs | 2× |
| BALL W. CROSS AXLE | 3985 | Lichtblauwgrijs | 1× |
| MINI HELMET, NO. 403 | 3448 | Zwart | 1× |
| WIG, W/ ACCESSORY, NO. 8 | 5326 | Zwart | 1× |
| Weapon Sword with Jagged Edges, Double Axle Hole | 79895 | Rood | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 3× |
| Plate 2 x 4 | 3020 | Zwart | 1× |
| Plate 1 x 3 | 3623 | Zwart | 2× |
| Plate 1 x 2 | 3023 | Zwart | 6× |
| Wedge Plate 2 x 4 | 51739 | Zwart | 1× |
| Slope Curved 3 x 1 No Studs | 50950 | Zwart | 6× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Zwart | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zwart | 5× |
| Tile 2 x 4 with Groove | 87079 | Zwart | 1× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Zwart | 6× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 4× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Zwart | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Zwart | 1× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Zwart | 10× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Zwart | 2× |
| Plate 2 x 3 | 3021 | Zwart | 4× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Donkerrood | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Zwart | 2× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Donkerrood | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Zwart | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Zwart | 6× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Zwart | 6× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Zwart | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Zwart | 16× |
| MINI LOWER PART, NO. 2628 | 106892 | Donkerrood | 1× |
| Brick Special 1 x 1 Studs on 4 Sides | 4733 | Zwart | 2× |
| STICK 6M W/FLANGE | 28921 | Roodbruin | 1× |
| Technic Axle 3 with Stop | 24316 | Roodbruin | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 2× |
| Plate 1 x 2 | 3023 | Zwart | 6× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zwart | 3× |
| Cone 1 x 1 [Top Groove] | 59900 | Zwart | 7× |
| Plate 2 x 2 | 3022 | Zwart | 3× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zwart | 1× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Zwart | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Zwart | 1× |
| Plate Special 1 x 2 with Door Rail | 32028 | Zwart | 1× |
| FLAT TILE 1X1 | 3070 | Zwart | 2× |
| Plate 2 x 4 | 3020 | Zwart | 1× |
| Slope Curved 2 x 1 Inverted | 24201 | Zwart | 10× |
| Plate 2 x 2 Corner | 2420 | Zwart | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Zwart | 16× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Zwart | 12× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Zwart | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Zwart | 4× |
| Plate 2 x 2 Corner | 2420 | Donker zandkleur | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Donker zandkleur | 4× |
| Plate 1x1 w/ 1.5 Hole | 35344 | Donker zandkleur | 4× |
| HEDGEHOG, SHOULDER ARMOUR | 5045 | Donker zandkleur | 1× |
| CROSS BLOCK 3X2X1 | 42797 | Parel donkergrijs | 2× |
| Minifig Head [Plain] [Vented Stud - 2 Holes] | 28621 | Zwart | 1× |
| CREATURE HEAD, NO. 285 | 114445 | Zwart | 1× |
| PLATE 1X1 ROUND | 34823 | Transparent Bright Orange | 5× |
| PLATE 1X1 W/TOOTH | 35162 | Transparent Bright Orange | 4× |
| PYRAMID RIDGED TILE 1X1X2/3 | 35343 | Transparent Bright Orange | 3× |
| ROCK CRYSTAL, TRANSPARENT | 28623 | Trans-neongroen | 2× |
| LIGHT SWORD BLADE | 28697 | Trans-neongroen | 1× |
| SLIDE SHOE ROUND 2X2 | 28558 | Trans-neongroen | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Geel | 6× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Geel | 2× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Geel | 2× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Limoen | 2× |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 15208 | Parel goud | 1× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Geel | 7× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Geel | 2× |
| Horn with Shaft | 88513 | Medium Lime | 8× |
| Minifig Neckwear Armor with Dual Layer Shoulder Pads | 35635 | Parel goud | 1× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Parel goud | 2× |
| Fin Jagged with Axle Hole | 76919 | Parel goud | 2× |
| Plate 2 x 2 | 3022 | Geel | 1× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Parel goud | 1× |
| PLATE W. BOWS 2X1½ | 81300 | Medium Lime | 3× |
| Animal / Creature Body Part, Claw with Clip | 3171 | Parel goud | 6× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Geel | 2× |
| Large Figure Cover 4 x 5 x 2 with Bar, 4 Studs, Ridged | 4986 | Parel goud | 2× |
| Minifig Neckwear Armor Shoulder Pad Single with Scabbard for 2 Katanas, Wedge | 5501 | Parel goud | 1× |
| Weapon Sword / Katana / Wakizashi Short | 5644 | Parel goud | 3× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Geel | 8× |
| FLAT TILE 2X2, ROUND, NO. 1321 | 110209 | Medium Lime | 1× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Parel goud | 2× |
| PLATE 1X1 W. HOLDER | 44860 | Medium Lime | 1× |
| Flames 5 x 7 x 1 x 1/3 with Studs, Handle | 7727 | Trans-oranje | 1× |
| Plate 1 x 5 | 78329 | Wit | 2× |
| MINI LOWER PART, NO. 2811 | 112684 | Wit | 1× |
| MINI UPPER PART, NO. 6870 | 76382 | Wit | 1× |