


LEGO NINJAGO 71871-1 Battle at the Dragon's Blade brengt de eindstrijd uit de NINJAGO Legends-verhaallijn De nacht valt tot leven. Het displaymodel zet een vierkoppige draak tegenover de gemene Verslinder-slang die uit de grond omhoogkomt. Na het bouwen kan de draak van de basis worden gehaald voor actiescenes, terwijl beide figuren beweegbare details hebben zoals koppen, nekken, kaken, staart en vleugels. Met Jin, Mira, Nate en een Oni-generaal krijgt de scene herkenbare hoofdpersonen, waardoor de set zowel als dramatisch NINJAGO-displaymodel werkt als een grote speelset voor fans die meer willen dan een statische draak.
Onderdelen inventaris
| Onderdeel | Kleur | Aantal |
|---|---|---|
![]() MINI BODY LOWER PART BLACK 73200 | Zwart | 1× |
![]() Brick 1 x 4 3010 | Zwart | 2× |
![]() Plate 2 x 4 3020 | Zwart | 1× |
![]() Plate 2 x 3 3021 | Zwart | 12× |
![]() Plate 2 x 2 3022 | Zwart | 3× |
![]() Plate 1 x 2 3023 | Zwart | 4× |
![]() Plate 1 x 1 3024 | Zwart | 6× |
![]() Plate 6 x 8 3036 | Zwart | 2× |
![]() Slope 45? 2 x 2 3039 | Zwart | 2× |
![]() FLAT TILE 1X2 3069 | Zwart | 4× |
10 van 302 onderdelen getoond
🔓 Meld je aan om alle onderdelen te zien| Plate 1 x 2 | 3023 | Zwart | 4× |
| Plate 1 x 1 | 3024 | Zwart | 6× |
| Plate 6 x 8 | 3036 | Zwart | 2× |
| Slope 45? 2 x 2 | 3039 | Zwart | 2× |
| FLAT TILE 1X2 | 3069 | Zwart | 4× |
| FLAT TILE 1X1 | 3070 | Zwart | 2× |
| Plate 1 x 3 | 3623 | Zwart | 5× |
| Plate 1 x 6 | 3666 | Zwart | 2× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Zwart | 2× |
| Plate 2 x 10 | 3832 | Zwart | 2× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Zwart | 4× |
| ATTIC 1X2/45° | 3049 | Zwart | 2× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Zwart | 2× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Zwart | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zwart | 4× |
| SHAFT 3M Ø3.2 | 17715 | Zwart | 1× |
| LIGHT SWORD - BLADE | 21462 | Zwart | 1× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Zwart | 2× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Zwart | 2× |
| STICK 6M W/FLANGE | 28921 | Zwart | 1× |
| Tile Round 1 x 1 Quarter | 25269 | Zwart | 2× |
| PLATE 1x2 W. HORIZONTAL HOLE Ø4,85 REV. | 28809 | Zwart | 2× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Zwart | 1× |
| PLATE 1X2 W. VERTICAL SCHAFT | 43876 | Zwart | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Zwart | 4× |
| Horn with Shaft | 88513 | Zwart | 2× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Zwart | 2× |
| HOLDER Ø3.2 W/TUBE Ø3.2 HOLE | 44873 | Zwart | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Zwart | 2× |
| Plate 1 x 5 | 78329 | Zwart | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Zwart | 2× |
| Animal / Creature Body Part, Claw with Clip | 3171 | Zwart | 6× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Zwart | 2× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Zwart | 1× |
| ROOF TILE 3X4/25 DEG. | 3016 | Zwart | 3× |
| Plate Angled 2 x 2 with Step and Hole in Center | 79846 | Zwart | 2× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Zwart | 2× |
| SWORD, NO. 29 | 7507 | Zwart | 1× |
| 1/4 CONE 6X6, W/ CUTOUT | 7848 | Zwart | 4× |
| Technic Axle 4 | 3705 | Zwart | 1× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Zwart | 1× |
| ANGLE ELEMENT, 90 DEGREES [6] | 42155 | Zwart | 1× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Zwart | 11× |
| Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 48267 | Zwart | 1× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Zwart | 2× |
| CROSS BLOCK 3X2 | 42191 | Zwart | 2× |
| Plate 1 x 4 | 3710 | Zandkleur | 9× |
| Plate 1 x 2 | 3023 | Zandkleur | 19× |
| Plate 2 x 2 Corner | 2420 | Zandkleur | 2× |
| Plate 2 x 4 | 3020 | Zandkleur | 1× |
| Plate 2 x 3 | 3021 | Zandkleur | 14× |
| Brick Special 1 x 1 with Headlight | 4070 | Zandkleur | 1× |
| ROOF TILE 1X2/45° | 3040 | Zandkleur | 2× |
| Plate 1 x 6 | 3666 | Zandkleur | 3× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Zandkleur | 1× |
| Plate 1 x 10 | 4477 | Zandkleur | 4× |
| Slope Inverted 45° 2 x 1 | 3665 | Zandkleur | 6× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Zandkleur | 6× |
| Plate 2 x 10 | 3832 | Zandkleur | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zandkleur | 3× |
| Slope Curved 3 x 1 No Studs | 50950 | Zandkleur | 2× |
| Tile Special 2 x 2 Inverted | 11203 | Zandkleur | 1× |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Zandkleur | 4× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zandkleur | 7× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zandkleur | 2× |
| Slope 18° 4 x 1 | 60477 | Zandkleur | 2× |
| Horn with Shaft | 88513 | Zandkleur | 2× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Zandkleur | 5× |
| Slope Inverted 45° 4 x 2 Double | 4871 | Zandkleur | 1× |
| Tile Round 1 x 1 Quarter | 25269 | Zandkleur | 16× |
| Wedge Plate 4 x 2 Right | 41769 | Zandkleur | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Zandkleur | 2× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Zandkleur | 3× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Zandkleur | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Zandkleur | 4× |
| Plate 1x1 w/ 1.5 Hole | 35344 | Zandkleur | 6× |
| RIDGED TILE 1X2/45° | 3044 | Zandkleur | 1× |
| Slope Curved 4 x 1 Inverted | 13547 | Zandkleur | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Zandkleur | 6× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Zandkleur | 6× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Zandkleur | 9× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Zandkleur | 6× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Zandkleur | 8× |
| Plate 1 x 5 | 78329 | Zandkleur | 2× |
| Plate 1x1 with Up Right Holder | 44842 | Zandkleur | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Zandkleur | 3× |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 68568 | Zandkleur | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Zandkleur | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Zandkleur | 3× |
| Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts | 1750 | Zandkleur | 1× |
| Wedge Curved 6 x 2 Right, Smooth Inner Walls | 5711 | Zandkleur | 5× |
| Equipment Broom End | 90826 | Zandkleur | 1× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Zandkleur | 4× |
| Wedge Curved 6 x 2 Left, Smooth Inner Walls | 5830 | Zandkleur | 5× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Zandkleur | 8× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Donkerpaars | 1× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Zwart | 10× |
| ELEMENT SEPARATOR | 31510 | Oranje | 1× |
| Plate 2 x 3 | 3021 | Rood | 12× |
| Plate 1 x 1 | 3024 | Rood | 4× |
| Tile 1 x 8 with Groove | 4162 | Rood | 1× |
| Brick 1 x 10 | 6111 | Rood | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Rood | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Rood | 8× |
| Tile 1 x 3 | 63864 | Rood | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Rood | 20× |
| Tile Round 1 x 1 Quarter | 25269 | Rood | 20× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Rood | 3× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Rood | 3× |
| Technic Axle 2 Notched | 32062 | Rood | 2× |
| Technic Axle 4 | 3705 | Rood | 1× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Rood | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Rood | 1× |
| Technic Axle 3 | 4519 | Geel | 1× |
| Plate 1 x 8 | 3460 | Zandkleur | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Trans-Bright Green | 6× |
| Plate 1 x 2 | 3023 | Trans-Bright Green | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Trans-Bright Green | 3× |
| Slope 33° 3 x 1 | 4286 | Zandkleur | 5× |
| Tile 1 x 4 with Groove | 2431 | Yellowish Green | 2× |
| Plate 2 x 3 with 1 x 1 Cutout | 73831 | Lichtblauwgrijs | 1× |
| Tile Round 1 x 1 Quarter | 25269 | Zandkleur | 6× |
| Wedge Plate 6 x 2 Left | 78443 | Lichtblauwgrijs | 1× |
| Wedge Plate 6 x 2 Right | 78444 | Lichtblauwgrijs | 1× |
| Plant, Plate 1 x 1 Round with 3 Leaves | 32607 | Lichtblauwgrijs | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Metallic zilver | 1× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Donkerblauwgrijs | 2× |
| Plate 1 x 8 | 3460 | Donkerblauwgrijs | 1× |
| PLATE 2X2 ROUND | 4032 | Donkerblauwgrijs | 4× |
| Brick 1 x 3 | 3622 | Donkerblauwgrijs | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Donkerblauwgrijs | 1× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Donkerblauwgrijs | 3× |
| Technic Plate 2 x 8 [7 Holes] | 3738 | Donkerblauwgrijs | 1× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Donkerblauwgrijs | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Donkerblauwgrijs | 3× |
| Tile Special 2 x 2 Inverted | 11203 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Donkerblauwgrijs | 10× |
| Plate Special 1 x 2 with 5.9mm Towball Socket and Towball | 14419 | Donkerblauwgrijs | 6× |
| Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | 10247 | Donkerblauwgrijs | 1× |
| Tile Round 2 x 2 with Hole | 15535 | Donkerblauwgrijs | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 2 with End Towball | 22890 | Donkerblauwgrijs | 6× |
| Plate 1 x 12 | 60479 | Donkerblauwgrijs | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Donkerblauwgrijs | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Donkerblauwgrijs | 2× |
| Wedge Sloped 45° 2 x 2 Corner | 13548 | Donkerblauwgrijs | 2× |
| FLAT TILE 1X1, ROUND | 35381 | Donkerblauwgrijs | 7× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Donkerblauwgrijs | 1× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Donkerblauwgrijs | 2× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Donkerblauwgrijs | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Donkerblauwgrijs | 1× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Donkerblauwgrijs | 3× |
| ANGLE ELEMENT, 90 DEGREES [6] | 42155 | Donkerblauwgrijs | 1× |
| DOUBLE CROSS BLOCK | 42142 | Donkerblauwgrijs | 2× |
| Rotation Joint Socket with 2 Pins | 80563 | Donkerblauwgrijs | 1× |
| Technic Pin 1/2 with Friction | 89678 | Donkerblauwgrijs | 6× |
| Brick 1 x 2 | 3004 | Magenta | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Magenta | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Donker zandkleur | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Medium lavendel | 2× |
| Tile 2 x 3 | 26603 | Magenta | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Donkerroze | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Donkerroze | 2× |
| Slope Curved 4 x 3 with 3 Layers, 1 x 3 Cutout on Underside | 66955 | Donkerblauwgrijs | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Donker zandkleur | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 8× |
| Plate 2 x 4 | 3020 | Zwart | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 6× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zwart | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zwart | 5× |
| Plate 2 x 6 | 3795 | Zwart | 1× |
| Plate 2 x 2 Corner | 2420 | Zwart | 2× |
| FLAT TILE 1X1, 1/2 CIRCLE | 35399 | Zwart | 4× |
| Plate 1 x 1 | 3024 | Lichtblauwgrijs | 8× |
| Plate 2 x 8 | 3034 | Lichtblauwgrijs | 1× |
| Plate Round Corner 3 x 3 | 30357 | Lichtblauwgrijs | 4× |
| Plate 1 x 6 | 3666 | Lichtblauwgrijs | 2× |
| Plate 2 x 3 | 3021 | Lichtblauwgrijs | 2× |
| Plate 1 x 8 | 3460 | Lichtblauwgrijs | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Metallic zilver | 2× |
| Plate Round Half 4 x 8 | 22888 | Lichtblauwgrijs | 1× |
| Tile Round 1 x 2 | 1126 | Lichtblauwgrijs | 3× |
| Brick 2 x 2 | 3003 | Lichtblauwgrijs | 1× |
| Plate 1 x 2 | 3023 | Lichtblauwgrijs | 13× |
| Plate 1 x 1 | 3024 | Lichtblauwgrijs | 1× |
| Plate 4 x 8 | 3035 | Lichtblauwgrijs | 1× |
| Plate 1 x 6 | 3666 | Lichtblauwgrijs | 4× |
| MINI HANDLE | 3839 | Lichtblauwgrijs | 1× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Lichtblauwgrijs | 4× |
| Brick 1 x 12 | 6112 | Lichtblauwgrijs | 1× |
| Tile 1 x 6 with Groove | 6636 | Lichtblauwgrijs | 3× |
| BRICK 2X6 | 44237 | Lichtblauwgrijs | 1× |
| Plate 1 x 10 | 4477 | Lichtblauwgrijs | 4× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Lichtblauwgrijs | 1× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Lichtblauwgrijs | 4× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Lichtblauwgrijs | 15× |
| Slope Curved 2 x 1 Inverted | 24201 | Lichtblauwgrijs | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Lichtblauwgrijs | 2× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Lichtblauwgrijs | 7× |
| PLATE 1X4 SPLIT-LEVEL | 42505 | Lichtblauwgrijs | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Lichtblauwgrijs | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Lichtblauwgrijs | 6× |
| Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] | 1927 | Lichtblauwgrijs | 2× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Lichtblauwgrijs | 1× |
| RIGHT PLATE 3X8 DEG. 14 | 8187 | Lichtblauwgrijs | 1× |
| Technic Axle 5 | 32073 | Lichtblauwgrijs | 1× |
| Technic Axle 3 | 4519 | Lichtblauwgrijs | 5× |
| Technic Pin Connector Perpendicular 2 x 2 Bent | 44809 | Lichtblauwgrijs | 1× |
| 1/2 BUSH | 42136 | Lichtblauwgrijs | 2× |
| LEVER 5M | 44864 | Lichtblauwgrijs | 2× |
| FLEX JOINT 6M, Ø24, FEMALE | 65765 | Lichtblauwgrijs | 1× |
| ANGLE ELEMENT, 180 DEGREES [2] | 42134 | Lichtblauwgrijs | 2× |
| Technic Axle and Pin Connector Perpendicular Double Split [Reinforced] | 69819 | Lichtblauwgrijs | 2× |
| BALL W. CROSS AXLE | 3985 | Lichtblauwgrijs | 1× |
| Weapon Sword with Jagged Edges, Double Axle Hole | 79895 | Rood | 1× |
| Plate 1 x 6 | 3666 | Zwart | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zwart | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zwart | 2× |
| FLAT TILE 1X1, 1/2 CIRCLE | 35399 | Donkerrood | 1× |
| Plant, Plate 1 x 1 Round with 3 Leaves | 32607 | Zwart | 2× |
| Plate 1 x 2 | 3023 | Zwart | 3× |
| Plate 1 x 4 | 3710 | Zwart | 2× |
| FLAT TILE 1X1 | 3070 | Roodbruin | 4× |
| Plate 2 x 2 | 3022 | Zwart | 3× |
| Cone 1 x 1 [Top Groove] | 59900 | Zwart | 3× |
| STICK 6M W/FLANGE | 28921 | Roodbruin | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Zwart | 1× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Zwart | 3× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Zwart | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Zwart | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Zwart | 2× |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | 13564 | Zwart | 4× |
| Plate 1x1 with Up Right Holder | 44842 | Roodbruin | 2× |
| Brick Curved 2 x 1 with Inverted Cutout | 78666 | Zwart | 2× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Zwart | 6× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Zwart | 1× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Zwart | 1× |
| Technic Axle 3 with Stop | 24316 | Roodbruin | 4× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Zwart | 1× |
| ANGLE ELEMENT, 112,5 DEGR. [5] | 41488 | Roodbruin | 3× |
| ANGLE ELEMENT, 180 DEGREES [2] | 42134 | Roodbruin | 1× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Zwart | 6× |
| Technic Axle and Pin Connector Angled Triple - 60° | 7329 | Helder groen | 1× |
| Plate 1 x 4 | 3710 | Zwart | 3× |
| Brick 1 x 2 | 3004 | Zwart | 1× |
| Plate 1 x 1 | 3024 | Zwart | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 4× |
| Plate 1 x 2 | 3023 | Zwart | 7× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zwart | 4× |
| Plate 2 x 4 | 3020 | Zwart | 5× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 6× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Zwart | 4× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Zwart | 4× |
| Brick 1 x 1 | 3005 | Donker zandkleur | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Donker zandkleur | 25× |
| Plate 2 x 2 | 3022 | Donker zandkleur | 6× |
| Plate 1 x 3 | 3623 | Donker zandkleur | 7× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Donker zandkleur | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Donker zandkleur | 4× |
| Horn with Shaft | 88513 | Donker zandkleur | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Donker zandkleur | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Donker zandkleur | 3× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Donker zandkleur | 9× |
| Wedge Sloped 45° 2 x 2 Corner | 13548 | Donker zandkleur | 2× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Donker zandkleur | 2× |
| BRICK 2X2 W/ BALL Ø 10.2 | 57909 | Donker zandkleur | 1× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Donker zandkleur | 4× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Trans-doorzichtig | 1× |
| Nose Cone Small 1x1 | 28701 | Transparent Bright Orange | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Geel | 2× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Limoen | 3× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Medium Lime | 4× |
| Plate 1x1 with Up Right Holder | 44842 | Medium Lime | 2× |
| Weapon Sword, Big Blade with Bar | 98137 | Parel goud | 2× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Medium Lime | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Parel goud | 2× |
| Fin Jagged with Axle Hole | 76919 | Parel goud | 1× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Medium Lime | 4× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Parel goud | 5× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Helder licht oranje | 1× |
| Weapon Hilt Symmetric | 66909 | Metallic goud | 1× |
| Minifig Neckwear Armor Shoulder Pad Single with Scabbard for 2 Katanas, Wedge | 5501 | Parel goud | 1× |
| Weapon Sword / Katana / Wakizashi Short | 5644 | Parel goud | 1× |
| Large Figure Weapon Sword with Axle Connector | 2144 | Trans-donkerroze | 2× |
| Chain 2L with Bars | 6981 | Parel goud | 1× |
| Brick 1 x 6 | 3009 | Wit | 3× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Wit | 1× |
| Plate 1 x 4 | 3710 | Wit | 3× |
| Cone 1 x 1 [Top Groove] | 59900 | Wit | 2× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Wit | 3× |
| Tile 2 x 3 | 26603 | Wit | 2× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Wit | 6× |
| Horn with Shaft | 88513 | Wit | 12× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Wit | 2× |
| MINI WIG NO. 8 | 8281 | Wit | 1× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Wit | 1× |
Bouw-DNA
Onderdeleninzichten voor Battle at the Dragon's Blade
Met 1.017 onderdelen zit deze build +122% ten opzichte van de gemiddelde Ninjago set en +62% ten opzichte van de gemiddelde release uit 2026.
T.o.v. gemiddelde Ninjago set
Gemiddelde Ninjago set: 458 onderdelen over 408 andere sets.
T.o.v. gemiddelde set uit 2026
Gemiddelde set uit 2026: 627 onderdelen over 427 andere sets.
Kleurprofiel
Dominante kleur
Zwart
Unieke onderdelen
4.8 onderdelen per uniek type
Herhalingsfactor
Gemiddeld aantal onderdelen per uniek type.
Meest gebruikte onderdeel
Slope 30° 1 x 1 x 2/3 (Cheese Slope)
53xResultaten zijn gebaseerd op officiële LEGO onderdelen inventarissen. Nauwkeurigheid verbetert naarmate je set compleetheid bevestigt.
Deze site is niet gelieerd aan of goedgekeurd door de LEGO Groep.









