


Herbeleef dierbare Trainer-momenten met de prachtige LEGO Pokémon Pikachu en Poké Ball (72152-1) bouwset. Vang de spanning van de strijd of een vredig moment met dit iconische elektrische Pokémon-display. Dit levendige model toont Pikachu in zijn klassieke geel met kenmerkende zwarte oorpunten en rode wangen, vol energie gesymboliseerd door bliksemvonken. Presenteer Pikachu's veelzijdige verstelbare staart, configureerbaar voor zowel mannelijke als vrouwelijke versies, terwijl hij dynamisch lanceert uit een geopende Poké Ball, of rust in een gesloten exemplaar. De displayvoet bevat trots '25', een slimme verwijzing naar Pikachu's geliefde Pokédex-nummer, wat dit een levendig gamingkamer-decorstuk maakt voor elke toegewijde Pokémon-fan.
Onderdelen inventaris
| Onderdeel | Kleur | Aantal |
|---|---|---|
![]() Plate 2 x 2 Corner 2420 | Zwart | 6× |
![]() Tile 1 x 4 with Groove 2431 | Zwart | 4× |
![]() Plate 2 x 12 2445 | Zwart | 1× |
![]() Brick 2 x 3 3002 | Zwart | 2× |
![]() Brick 2 x 2 3003 | Zwart | 1× |
![]() Plate 2 x 4 3020 | Zwart | 7× |
![]() Plate 2 x 3 3021 | Zwart | 9× |
![]() Plate 2 x 2 3022 | Zwart | 2× |
![]() Plate 1 x 2 3023 | Zwart | 11× |
![]() Plate 1 x 1 3024 | Zwart | 8× |
10 van 375 onderdelen getoond
🔓 Meld je aan om alle onderdelen te zien| Plate 2 x 4 | 3020 | Zwart | 7× |
| Plate 2 x 3 | 3021 | Zwart | 9× |
| Plate 2 x 2 | 3022 | Zwart | 2× |
| Plate 1 x 2 | 3023 | Zwart | 11× |
| Plate 1 x 1 | 3024 | Zwart | 8× |
| Plate 4 x 6 | 3032 | Zwart | 2× |
| Plate 2 x 8 | 3034 | Zwart | 3× |
| Plate 4 x 8 | 3035 | Zwart | 1× |
| FLAT TILE 2X2 | 3068 | Zwart | 6× |
| FLAT TILE 1X2 | 3069 | Zwart | 2× |
| FLAT TILE 1X1 | 3070 | Zwart | 1× |
| Plate 1 x 3 | 3623 | Zwart | 14× |
| Plate 1 x 6 | 3666 | Zwart | 7× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Zwart | 2× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Zwart | 5× |
| Plate 1 x 4 | 3710 | Zwart | 16× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Zwart | 1× |
| Tile 1 x 8 with Groove | 4162 | Zwart | 3× |
| Plate 2 x 16 | 4282 | Zwart | 2× |
| TAP Ø4.9/6.4 | 4599 | Zwart | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Zwart | 3× |
| Tile 1 x 6 with Groove | 6636 | Zwart | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Zwart | 4× |
| Wedge Plate 4 x 2 Right | 41769 | Zwart | 5× |
| Wedge Plate 4 x 2 Left | 41770 | Zwart | 7× |
| Wedge Plate 3 x 2 Right | 43722 | Zwart | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Zwart | 1× |
| Plate 4 x 4 | 3031 | Zwart | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zwart | 5× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Zwart | 2× |
| Tile 2 x 4 with Groove | 87079 | Zwart | 5× |
| BRICK 1X2X2 | 3245 | Zwart | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Zwart | 2× |
| Slope Curved 4 x 1 Inverted | 13547 | Zwart | 2× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Zwart | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Zwart | 2× |
| Wedge Plate 2 x 2 Left | 24299 | Zwart | 1× |
| Slope Curved 3 x 2 No Studs | 24309 | Zwart | 1× |
| Tile 2 x 3 | 26603 | Zwart | 8× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Zwart | 1× |
| Plate 3 x 3 | 11212 | Zwart | 4× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Zwart | 4× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Zwart | 4× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Zwart | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Zwart | 5× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Zwart | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Zwart | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Zwart | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Zwart | 1× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Zwart | 12× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Zwart | 1× |
| BRICK 2X2 Ø4.85 VERTIC. SNAP | 48454 | Zwart | 2× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Zwart | 6× |
| Tile 2 x 6 | 69729 | Zwart | 7× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Zwart | 2× |
| PLATE 1X2 W/STUB/ALONG/UPPER P | 53922 | Zwart | 1× |
| Plate 1 x 5 | 78329 | Zwart | 2× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Zwart | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Zwart | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Zwart | 10× |
| Plate 3 x 3 Corner | 77844 | Zwart | 2× |
| TILE 4X4, W/ BOW, NO. 5 | 3477 | Zwart | 4× |
| Plate 2 x 3 with 1 x 1 Cutout | 73831 | Zwart | 2× |
| Wedge Plate 8 x 3, 8° Right | 3545 | Zwart | 6× |
| Wedge Plate 8 x 3, 8° Left | 3544 | Zwart | 10× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Zwart | 4× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Zwart | 1× |
| BRICK 2X2 W/ BALL Ø 10.2 | 57909 | Zwart | 2× |
| Cone 2 x 2 x 2 Inverted | 49309 | Zwart | 2× |
| Slope Curved 3 x 1 x 2/3 | 7302 | Zwart | 2× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Zwart | 1× |
| Slope 1 x 4 with 1 x 2 Cutout | 5654 | Zwart | 29× |
| Technic Axle 4 | 3705 | Zwart | 2× |
| Technic Axle 2 Notched | 32062 | Zwart | 14× |
| Technic Beam 1 x 5 Thick | 32316 | Zwart | 1× |
| Technic Beam 1 x 3 Thick | 32523 | Zwart | 1× |
| Technic Beam 1 x 2 Thick | 43857 | Zwart | 1× |
| Technic Beam 1 x 7 Thick | 32524 | Zwart | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Zwart | 3× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Zwart | 2× |
| Technic Pin Connector Hub with 2 Perpendicular Axles | 10197 | Zwart | 3× |
| ANGLE ELEMENT, 157,5 DEGR. [3] | 42128 | Zwart | 2× |
| ANGLE ELEMENT, 112,5 DEGR. [5] | 41488 | Zwart | 4× |
| TECHNIC ANGULAR BEAM 3X7 | 42160 | Zwart | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Zwart | 34× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Zwart | 2× |
| BUSH FOR CROSS AXLE | 42798 | Zwart | 2× |
| Technic Axle and Pin Connector Angled #7 - 168.75° | 4450 | Zwart | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Zandkleur | 2× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Zandkleur | 2× |
| BRICK 2X8 | 93888 | Zandkleur | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Zandkleur | 6× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Zandkleur | 6× |
| Plate 2 x 6 | 3795 | Donkerblauw | 1× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Donkerblauwgrijs | 1× |
| ROOF TILE 2X3/25° INV. | 3747 | Dark Blue-Violet | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Donkerblauw | 6× |
| FLAT TILE 1X1, ROUND | 35381 | Dark Blue-Violet | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Donkerpaars | 8× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Zwart | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Donkerblauw | 7× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Donkerblauw | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 12× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Zwart | 22× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Donkerblauwgrijs | 2× |
| Brick 1 x 2 | 3004 | Zwart | 4× |
| Plate 2 x 4 | 3020 | Zwart | 13× |
| Brick 1 x 4 | 3010 | Zwart | 1× |
| Plate 1 x 2 | 3023 | Zwart | 18× |
| Plate 2 x 2 | 3022 | Zwart | 2× |
| ROUND BRICK 1X1 | 3062 | Helder groen | 4× |
| Brick Special 1 x 1 x 1 2/3 with 6 Studs on 3 Sides | 7729 | Helder groen | 5× |
| Plate 1 x 4 | 3710 | Oranje | 6× |
| Plate 2 x 6 | 3795 | Oranje | 6× |
| Brick 2 x 4 | 3001 | Oranje | 2× |
| Brick 1 x 1 | 3005 | Oranje | 1× |
| Brick Special 1 x 1 with Headlight | 4070 | Oranje | 4× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Oranje | 7× |
| Plate 1 x 3 | 3623 | Oranje | 2× |
| ELEMENT SEPARATOR | 31510 | Oranje | 1× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Oranje | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Oranje | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Oranje | 23× |
| TECHNIC LEVER 3M | 65123 | Oranje | 2× |
| Brick 1 x 2 | 3004 | Zwart | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Zwart | 10× |
| Plate 2 x 4 | 3020 | Rood | 3× |
| Plate 2 x 2 | 3022 | Rood | 2× |
| Plate 1 x 2 | 3023 | Rood | 4× |
| Plate 2 x 6 | 3795 | Rood | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Rood | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Rood | 1× |
| Plate Round Corners 2 x 6 Double | 18980 | Rood | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Rood | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Rood | 4× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Rood | 10× |
| Bar 2L with Stop in Center | 78258 | Rood | 2× |
| Brick Curved 1 x 1 | 7126 | Rood | 4× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Rood | 2× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Rood | 10× |
| Technic Axle 2 Notched | 32062 | Rood | 4× |
| Technic Axle 4 | 3705 | Rood | 6× |
| Slope 45? 2 x 2 | 3039 | Zwart | 1× |
| Brick 1 x 1 | 3005 | Zwart | 1× |
| Brick 1 x 4 | 3010 | Zwart | 7× |
| Plate 2 x 6 | 3795 | Zwart | 5× |
| Radiator Grille 1x2 | 2412 | Geel | 4× |
| Plate 2 x 2 Corner | 2420 | Geel | 11× |
| Tile 1 x 4 with Groove | 2431 | Geel | 6× |
| Brick 1 x 2 | 3004 | Geel | 10× |
| Brick 1 x 1 | 3005 | Geel | 3× |
| Brick 1 x 8 | 3008 | Geel | 2× |
| Brick 1 x 4 | 3010 | Geel | 1× |
| Plate 2 x 4 | 3020 | Geel | 6× |
| Plate 2 x 3 | 3021 | Geel | 10× |
| Plate 2 x 2 | 3022 | Geel | 35× |
| Plate 1 x 2 | 3023 | Geel | 44× |
| Plate 1 x 1 | 3024 | Geel | 61× |
| Plate 6 x 10 | 3033 | Geel | 2× |
| FLAT TILE 2X2 | 3068 | Geel | 4× |
| FLAT TILE 1X2 | 3069 | Geel | 2× |
| FLAT TILE 1X1 | 3070 | Geel | 7× |
| Plate 1 x 8 | 3460 | Geel | 7× |
| Brick 1 x 3 | 3622 | Geel | 3× |
| Plate 1 x 3 | 3623 | Geel | 21× |
| Plate 1 x 6 | 3666 | Geel | 4× |
| Plate 1 x 4 | 3710 | Geel | 13× |
| ROOF TILE 2X3/25° INV. | 3747 | Geel | 2× |
| Plate 2 x 6 | 3795 | Geel | 6× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Geel | 4× |
| Tile 1 x 6 with Groove | 6636 | Geel | 4× |
| Wedge Plate 4 x 2 Right | 41769 | Geel | 5× |
| Wedge Plate 4 x 2 Left | 41770 | Geel | 5× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Geel | 17× |
| Wedge Plate 3 x 2 Right | 43722 | Geel | 4× |
| Wedge Plate 3 x 2 Left | 43723 | Geel | 4× |
| Tile 1 x 8 with Groove | 4162 | Geel | 2× |
| Plate 4 x 4 | 3031 | Geel | 4× |
| Slope Curved 3 x 1 No Studs | 50950 | Geel | 6× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Geel | 11× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Geel | 11× |
| Tile 1 x 3 | 63864 | Geel | 8× |
| Tile 2 x 4 with Groove | 87079 | Geel | 9× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Geel | 4× |
| Slope 18° 4 x 1 | 60477 | Geel | 3× |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Geel | 6× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Geel | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Geel | 6× |
| Slope Curved 4 x 2 No Studs | 93606 | Geel | 4× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Geel | 13× |
| Plate 1 x 10 | 4477 | Geel | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Geel | 2× |
| Plate Round Corners 2 x 6 Double | 18980 | Geel | 1× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Geel | 7× |
| Wedge Plate 2 x 2 Right | 24307 | Geel | 3× |
| Wedge Plate 2 x 2 Left | 24299 | Geel | 3× |
| Slope Curved 2 x 1 Inverted | 24201 | Geel | 6× |
| Tile 2 x 3 | 26603 | Geel | 6× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Geel | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Geel | 2× |
| Slope Curved 3 x 2 No Studs | 24309 | Geel | 28× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Geel | 3× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Geel | 13× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Geel | 4× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Geel | 10× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Geel | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Geel | 10× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Geel | 10× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Geel | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Geel | 5× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Geel | 4× |
| Tile 2 x 6 | 69729 | Geel | 1× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Geel | 5× |
| Plate Round Corner 4 x 4 | 30565 | Geel | 6× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Geel | 4× |
| Brick Round Corner, Curved 3 x 3 x 1 Quarter Circle | 76797 | Geel | 10× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Geel | 4× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Geel | 4× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Geel | 6× |
| PLATE 1X2 W/STUB VERTICAL/END | 49715 | Geel | 2× |
| Brick Curved 2 x 1 with Inverted Cutout | 78666 | Geel | 4× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Geel | 7× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Geel | 4× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Geel | 3× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Geel | 2× |
| Slope Double 45° 1 x 1 | 35464 | Geel | 6× |
| Brick Round Corner 4 x 4 x 1 | 5651 | Geel | 4× |
| Slope Curved 1 x 4 x 1 2/3 No Studs | 3573 | Geel | 8× |
| Plate 1 x 5 | 78329 | Geel | 4× |
| Slope Curved 2 x 2 with Stud Notch Right | 5093 | Geel | 1× |
| Slope Curved 2 x 2 with Stud Notch Left | 5095 | Geel | 1× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Geel | 6× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Geel | 6× |
| Plate 3 x 3 Corner | 77844 | Geel | 2× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Geel | 2× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Geel | 1× |
| Brick Curved 1 x 1 | 7126 | Geel | 4× |
| Brick Round Corner 3 x 3 x 2 Dome Top | 88293 | Geel | 2× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Geel | 7× |
| Brick Curved 1 x 2 x 1 2/3 with 1 Cutout | 5907 | Geel | 22× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Geel | 8× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Geel | 2× |
| Technic Axle 3 | 4519 | Geel | 2× |
| 1/2 BUSH | 42136 | Geel | 2× |
| TECHNIC LEVER 2M | 44862 | Geel | 4× |
| Brick 2 x 4 | 3001 | Trans-groen | 2× |
| Brick 1 x 1 | 3005 | Trans-groen | 8× |
| Plate 2 x 4 | 3020 | Trans-groen | 2× |
| Plate 2 x 2 Corner | 2420 | Zandgroen | 20× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Zandgroen | 6× |
| Plate 2 x 8 | 3034 | Lichtblauwgrijs | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Zandgroen | 13× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Lichtblauwgrijs | 2× |
| ANGLE ELEMENT, 112,5 DEGR. [5] | 41488 | Trans-groen | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Zwart | 4× |
| Plate 4 x 4 | 3031 | Lichtblauwgrijs | 2× |
| Plate 4 x 8 | 3035 | Lichtblauwgrijs | 1× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Lichtblauwgrijs | 12× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Zandkleur | 2× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Donkerblauwgrijs | 2× |
| Plate 1 x 6 | 3666 | Donkerblauwgrijs | 3× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Donkerblauwgrijs | 2× |
| Brick 1 x 3 | 3622 | Donkerblauwgrijs | 1× |
| Plate 4 x 4 | 3031 | Donkerblauwgrijs | 10× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Donkerblauwgrijs | 2× |
| Technic Axle 4 with Stop | 87083 | Donkerblauwgrijs | 2× |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 26604 | Zwart | 4× |
| ROUND BRICK 1X1 | 3062 | Lavendel | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Zwart | 2× |
| PLATE 2X2 ROUND | 4032 | Zwart | 2× |
| Plate 4 x 6 | 3032 | Zwart | 3× |
| Brick 1 x 1 | 3005 | Zwart | 8× |
| Brick 1 x 6 | 3009 | Zwart | 2× |
| Brick 2 x 4 | 3001 | Zwart | 4× |
| FLAT TILE 2X2 | 3068 | Medium Azur | 1× |
| Plate 1 x 4 | 3710 | Zwart | 16× |
| Brick 1 x 2 | 3004 | Zwart | 7× |
| Plate 1 x 2 | 3023 | Zwart | 11× |
| Tile 1 x 3 | 63864 | Zwart | 1× |
| Plate 1 x 3 | 3623 | Zwart | 3× |
| Plate 4 x 4 | 3031 | Zwart | 2× |
| Plate 2 x 2 Corner | 2420 | Zwart | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Zwart | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Zwart | 2× |
| Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 3 Support Walls on Bottom | 72132 | Zwart | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Zwart | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Zwart | 4× |
| Plate 1 x 2 | 3023 | Donkerpaars | 39× |
| Brick 1 x 4 | 3010 | Donkerpaars | 3× |
| FLAT TILE 2X2 | 3068 | Donkerpaars | 2× |
| Brick 2 x 2 Corner | 2357 | Zwart | 2× |
| Plate 2 x 2 | 3022 | Lichtblauwgrijs | 2× |
| Brick 2 x 4 | 3001 | Lichtblauwgrijs | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Lichtblauwgrijs | 2× |
| Plate 2 x 3 | 3021 | Lichtblauwgrijs | 10× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Lichtblauwgrijs | 2× |
| Technic Brick 1 x 14 [13 Pin Holes] | 32018 | Lichtblauwgrijs | 2× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Lichtblauwgrijs | 2× |
| BEARING ELEMENT 2X2 W.D. SNAP | 65514 | Zwart | 1× |
| Plate 1 x 2 | 3023 | Zwart | 2× |
| Plate 1 x 3 | 3623 | Zwart | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Zwart | 4× |
| Plate 1 x 4 | 3710 | Zwart | 1× |
| Plate 2 x 10 | 3832 | Zwart | 1× |
| Plate 1 x 8 | 3460 | Zwart | 1× |
| Plate 1 x 6 | 3666 | Zwart | 1× |
| Plate 1 x 1 | 3024 | Zwart | 5× |
| Brick 1 x 8 | 3008 | Zwart | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Zwart | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Zwart | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 1× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Zwart | 4× |
| TECHNIC ROTOR, 2 BLADES | 50029 | Roodbruin | 1× |
| Slope Curved 3 x 1 No Studs | 50950 | Zwart | 8× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Zwart | 2× |
| SHAFT 3M Ø3.2 | 17715 | Roodbruin | 1× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Zwart | 5× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Zwart | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Zwart | 4× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Zwart | 2× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Zwart | 1× |
| Brick Curved 1 x 2 x 1 2/3 with 1 Cutout | 5907 | Zwart | 8× |
| Bracket 5 x 1 x 1 1/3 | 5712 | Zwart | 1× |
| BRICK 2X2 W/ BALL Ø 10.2 | 57909 | Roodbruin | 1× |
| Technic Axle 5 with Stop | 15462 | Roodbruin | 2× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Zwart | 1× |
| Plate 1 x 10 | 4477 | Zwart | 1× |
| Plate 4 x 8 | 3035 | Donker zandkleur | 1× |
| Slope 33° 3 x 1 | 4286 | Donker zandkleur | 2× |
| Plate 2 x 2 | 3022 | Donker zandkleur | 2× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 2 Sides | 80796 | Trans-doorzichtig | 7× |
| Weapon Sword with Jagged Edges, Axle | 98856 | Trans-lichtblauw | 4× |
| Wave / Lightning with Axle Hole | 2149 | Trans-Bright Green | 5× |
| Minifig Ring 1 x 1 | 11010 | Chroom goud | 2× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Parel goud | 1× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Wit | 2× |
| Plate 2 x 2 | 3022 | Wit | 6× |
| Plate 1 x 2 | 3023 | Wit | 4× |
| Plate 1 x 1 | 3024 | Wit | 2× |
| FLAT TILE 2X2 | 3068 | Wit | 1× |
| Plate 1 x 8 | 3460 | Wit | 1× |
| Plate 1 x 6 | 3666 | Wit | 3× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Wit | 3× |
| Brick 1 x 10 | 6111 | Wit | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Wit | 3× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Wit | 3× |
| Plate 6 x 6 | 3958 | Wit | 1× |
| Plate 4 x 4 | 3031 | Wit | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Wit | 4× |
| Plate Round Corners 2 x 6 Double | 18980 | Wit | 2× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Wit | 2× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Wit | 4× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Wit | 6× |
| Plate 6 x 14 | 3456 | Wit | 2× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Wit | 4× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Wit | 3× |
| HOLDER Ø3.2 W/TUBE Ø3.2 HOLE | 44873 | Wit | 2× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Wit | 18× |
| Plate 1 x 5 | 78329 | Wit | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Wit | 9× |
| Plate 3 x 3 Corner | 77844 | Wit | 10× |
| Brick Curved 1 x 2 x 2/3 Double Curved Top, No Studs | 3563 | Wit | 2× |
| TILE 4X4, W/ BOW, NO. 5 | 3477 | Wit | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Wit | 16× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Wit | 4× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Wit | 4× |
| Brick Curved 1 x 1 | 7126 | Wit | 4× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Wit | 2× |
| ANGLE ELEMENT, 0 DEGREES [1] | 42127 | Wit | 2× |
Bouw-DNA
Onderdeleninzichten voor Pikachu and Poké Ball
Met 2.050 onderdelen zit deze build +3% ten opzichte van de gemiddelde Pokémon set en +227% ten opzichte van de gemiddelde release uit 2026.
T.o.v. gemiddelde Pokémon set
Gemiddelde Pokémon set: 1.992 onderdelen over 4 andere sets.
T.o.v. gemiddelde set uit 2026
Gemiddelde set uit 2026: 626 onderdelen over 423 andere sets.
Kleurprofiel
Dominante kleur
Geel
Unieke onderdelen
8.9 onderdelen per uniek type
Herhalingsfactor
Gemiddeld aantal onderdelen per uniek type.
Meest gebruikte onderdeel
Plate 1 x 2
133xResultaten zijn gebaseerd op officiële LEGO onderdelen inventarissen. Nauwkeurigheid verbetert naarmate je set compleetheid bevestigt.
Deze site is niet gelieerd aan of goedgekeurd door de LEGO Groep.









