


The Justifier
🏷️ 75323-1•🎨 Star Wars•📅 2022•🧱 1023 onderdelen•Gevorderd
LEGO Star Wars 75323-1 The Justifier gebruikt The Justifier als speelbare Star Wars-scene. Functies zoals cockpit, motorruimte zorgen voor concrete actie aan boord of rond het model. Daardoor draait de set om een concreet sagamoment met herkenbare personages, functies of displaydetails.
Onderdelen inventaris
| Onderdeel | Kleur | Aantal |
|---|---|---|
![]() Sticker Sheet for Set 75323-1 10100766 | Unknown | 1× |
![]() Weapon Bladed Claw Spread 10187 | Parel goud | 2× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Zwart | 2× |
![]() Plate 3 x 3 11212 | Olive Green | 2× |
![]() Plate 3 x 3 11212 | Zwart | 6× |
![]() Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle 11214 | Rood | 2× |
![]() Sports Roller Skate 11253 | Zwart | 2× |
![]() Plate Special 1 x 2 with Clip Horizontal on Side 11476 | Zwart | 1× |
![]() Slope Curved 2 x 1 No Studs [1/2 Bow] 11477 | Zwart | 2× |
![]() Plate Special 1 x 2 5.9mm Towball Socket 14418 | Lichtblauwgrijs | 4× |
10 van 302 onderdelen getoond
🔓 Meld je aan om alle onderdelen te zien| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Rood | 2× |
| Sports Roller Skate | 11253 | Zwart | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Zwart | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 2× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Lichtblauwgrijs | 4× |
| Brick 1 x 1 x 3 | 14716 | Zwart | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Donker zandkleur | 4× |
| Projectile, Spring Shooter Ammunition 8L Bar | 15303 | Trans-Bright Green | 4× |
| Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | 15400 | Donkerblauwgrijs | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Donkerblauwgrijs | 2× |
| Helicopter Landing Ski 1 x 6 with Pin Hole | 15540 | Donkerblauwgrijs | 5× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Donkerblauwgrijs | 5× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Donkerblauwgrijs | 2× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Donkerblauwgrijs | 6× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Rood | 1× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Lichtblauwgrijs | 2× |
| Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] | 1927 | Zwart | 8× |
| Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] | 1927 | Lichtblauwgrijs | 8× |
| Droid, Todo 360 | 2013pr0001 | Lichtblauwgrijs | 1× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Zwart | 8× |
| Slope 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid] | 22388 | Donker zandkleur | 1× |
| Wedge Sloped 4 x 4 Pointed | 22391 | Zwart | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Wit | 12× |
| Plate Special 1 x 2 with End Towball | 22890 | Donkerblauwgrijs | 4× |
| Brick 2 x 2 Corner | 2357 | Zandkleur | 2× |
| Slope 45° 2 x 6 | 23949 | Donkerblauwgrijs | 2× |
| Panel 1 x 2 x 1 with Rounded Corners and 2 Sides | 23969 | Zwart | 2× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Zwart | 4× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Mat zilver | 7× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Roodbruin | 3× |
| Tile 1 x 4 with Groove | 2431 | Zwart | 1× |
| Tile Special 1 x 2 with Handle | 2432 | Zwart | 2× |
| Plate 2 x 12 | 2445 | Donkerblauwgrijs | 4× |
| Brick 2 x 6 | 2456 | Rood | 1× |
| Wedge 3 x 3 Facet | 2462 | Donkerblauwgrijs | 2× |
| Brick 1 x 16 | 2465 | Zwart | 2× |
| Plate Special 2 x 2 with Pin on Bottom | 2476a | Donker zandkleur | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Zwart | 4× |
| Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 26599 | Zwart | 2× |
| Tile 2 x 3 | 26603 | Zwart | 2× |
| Tile 2 x 3 | 26603 | Donkerblauwgrijs | 3× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Zwart | 6× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Lichtblauwgrijs | 2× |
| Container Box 2 x 2 x 1 Reinforced Bottom | 2821 | Lichtblauwgrijs | 2× |
| Brick Special 1 x 2 with Grille | 2877 | Zwart | 10× |
| Brick 2 x 4 | 3001 | Zwart | 4× |
| Brick 2 x 4 | 3001 | Donkerblauwgrijs | 4× |
| Brick 2 x 4 | 3001 | Wit | 5× |
| Brick 2 x 3 | 3002 | Zwart | 2× |
| Brick 2 x 2 | 3003 | Lichtblauwgrijs | 2× |
| Brick 2 x 2 | 3003 | Zwart | 2× |
| Brick 2 x 2 | 3003 | Donkerblauwgrijs | 3× |
| Brick 1 x 2 | 3004 | Donker zandkleur | 6× |
| Brick 1 x 1 | 3005 | Lichtblauwgrijs | 1× |
| Brick 1 x 1 | 3005 | Donkerblauwgrijs | 2× |
| Brick 2 x 10 | 3006 | Zwart | 4× |
| Brick 2 x 8 | 3007 | Donkerblauwgrijs | 3× |
| Brick 1 x 8 | 3008 | Donkerblauwgrijs | 16× |
| Brick 1 x 6 | 3009 | Zwart | 1× |
| Brick 1 x 6 | 3009 | Donkerblauwgrijs | 2× |
| Brick 1 x 4 | 3010 | Rood | 1× |
| Equipment Binoculars | 30162 | Zwart | 2× |
| Plate Special / Shield Rectangular with 4 Studs, Handle | 30166 | Donkerblauwgrijs | 1× |
| Plate 2 x 4 | 3020 | Zwart | 7× |
| Plate 2 x 3 | 3021 | Lichtblauwgrijs | 2× |
| Plate 2 x 3 | 3021 | Zwart | 2× |
| Plate 2 x 3 | 3021 | Lichtblauwgrijs | 4× |
| Plate 2 x 2 | 3022 | Zwart | 3× |
| Plate 2 x 2 | 3022 | Oranje | 1× |
| Plate 1 x 2 | 3023 | Lichtblauwgrijs | 29× |
| Plate 1 x 1 | 3024 | Trans-rood | 18× |
| Plate 1 x 1 | 3024 | Limoen | 1× |
| Slope 55° 1 x 6 x 5 | 30249 | Donkerblauwgrijs | 2× |
| Plate 6 x 12 | 3028 | Lichtblauwgrijs | 1× |
| Plate 4 x 12 | 3029 | Donkerblauwgrijs | 2× |
| Plate 4 x 10 | 3030 | Zwart | 1× |
| Plate 4 x 4 | 3031 | Donkerblauwgrijs | 2× |
| Plate 4 x 6 | 3032 | Zwart | 6× |
| Plate 6 x 10 | 3033 | Donkerblauwgrijs | 2× |
| Plate 2 x 8 | 3034 | Donkerblauwgrijs | 5× |
| Plate 2 x 8 | 3034 | Zwart | 1× |
| Plate 4 x 8 | 3035 | Zwart | 4× |
| Wedge Plate 6 x 12 Left | 30355 | Donkerblauwgrijs | 1× |
| Wedge Plate 6 x 12 Right | 30356 | Donkerblauwgrijs | 1× |
| Plate 6 x 8 | 3036 | Donkerblauwgrijs | 2× |
| Plate 6 x 8 | 3036 | Zwart | 3× |
| Slope 18° 4 x 2 | 30363 | Donkerblauwgrijs | 5× |
| Slope 45° 2 x 4 | 3037 | Donkerblauwgrijs | 4× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Zwart | 4× |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | 30383 | Lichtblauwgrijs | 4× |
| Slope 45? 2 x 2 | 3039 | Zwart | 4× |
| Slope 45? 2 x 2 | 3039 | Donkerblauwgrijs | 1× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Roodbruin | 2× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Donkerblauwgrijs | 2× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Zwart | 2× |
| Slope 45° 2 x 2 Double Convex | 3045 | Zwart | 2× |
| Slope 45° 2 x 1 Double / Inverted with Bottom Stud Holder | 3049d | Donkerblauwgrijs | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Trans-groen | 8× |
| Tile 2 x 2 with Groove | 3068b | Zwart | 1× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Zwart | 2× |
| Technic Plate 2 x 6 [5 Holes] | 32001 | Zwart | 6× |
| Technic Pin 3/4 | 32002 | Zandkleur | 4× |
| Technic Beam 1 x 5 Thin | 32017 | Lichtblauwgrijs | 2× |
| Technic Brick 1 x 14 [13 Pin Holes] | 32018 | Zwart | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 2 with Door Rail | 32028 | Donker zandkleur | 4× |
| Wedge Plate 4 x 6 Cut Corners | 32059 | Zwart | 3× |
| Technic Axle 2 Notched | 32062 | Zwart | 2× |
| Technic Steering Arm with 2 Pins | 32069 | Zwart | 2× |
| Technic Knob Wheel | 32072 | Zwart | 4× |
| Technic Knob Wheel | 32072 | Geel | 4× |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 32124 | Roodbruin | 4× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Lichtblauwgrijs | 3× |
| Technic Beam 1 x 15 Thick | 32278 | Donkerblauwgrijs | 1× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Donkerblauwgrijs | 4× |
| Technic Beam 1 x 7 Thick | 32524 | Zwart | 2× |
| Technic Beam 1 x 11 Thick | 32525 | Lichtblauwgrijs | 2× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Zwart | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Zwart | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Zwart | 6× |
| Slope 33° 3 x 4 | 3297 | Rood | 1× |
| Slope 33° 3 x 2 | 3298 | Donkerblauwgrijs | 6× |
| Cone 1 1/2 x 1 1/2 x 2/3 | 33492 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Zandkleur | 2× |
| Plate 1 x 8 | 3460 | Zwart | 8× |
| Technic Driving Ring Extension, 8 Ridges | 35186 | Zwart | 2× |
| Slope Double 45° 1 x 1 | 35464 | Lichtblauwgrijs | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Zwart | 10× |
| Brick 1 x 3 | 3622 | Roodbruin | 10× |
| Brick 1 x 3 | 3622 | Donkerblauwgrijs | 2× |
| Plate 1 x 3 | 3623 | Zwart | 2× |
| Plate 1 x 3 | 3623 | Lichtblauwgrijs | 4× |
| Plate 1 x 3 | 3623 | Zandblauw | 6× |
| Brick Arch 1 x 4 | 3659 | Rood | 2× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Donkerblauwgrijs | 14× |
| Slope Inverted 45° 2 x 1 | 3665 | Zwart | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Donkerblauwgrijs | 8× |
| Plate 1 x 6 | 3666 | Zwart | 4× |
| Plate 1 x 6 | 3666 | Donkerblauwgrijs | 7× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Lichtblauwgrijs | 2× |
| Weapon Dagger / Knife | 37 | Donkerblauwgrijs | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Zandkleur | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Zwart | 10× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Rood | 2× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Lichtblauwgrijs | 9× |
| Technic Axle 8 | 3707 | Rood | 1× |
| Plate 1 x 4 | 3710 | Zwart | 5× |
| Technic Gear Rack 1 x 4 | 3743 | Zwart | 8× |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | 3747b | Donkerblauwgrijs | 3× |
| Plate 2 x 10 | 3832 | Zwart | 5× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Zwart | 2× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Donkerblauwgrijs | 2× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Zwart | 4× |
| Plate 6 x 6 | 3958 | Donkerblauwgrijs | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Lichtblauwgrijs | 12× |
| Technic Beam 1 x 13 Thick | 41239 | Zwart | 1× |
| Tile 1 x 8 with Groove | 4162 | Zwart | 3× |
| Tile 1 x 8 with Groove | 4162 | Donkerblauwgrijs | 4× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Roodbruin | 1× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Roodbruin | 1× |
| Brick Curved 6 x 1 | 42022 | Zwart | 2× |
| Technic Pin 1/2 | 4274 | Wit | 2× |
| Plate 2 x 16 | 4282 | Donkerblauwgrijs | 5× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Zwart | 9× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 5× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Zwart | 1× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Donkerblauwgrijs | 2× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Zwart | 1× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Donkerblauwgrijs | 2× |
| Dish 3 x 3 Inverted [Radar] | 43898 | Trans-lichtblauw | 4× |
| Technic Rotation Joint Disk with Pin and 3L Beam Thick | 44225 | Lichtblauwgrijs | 2× |
| Slope 45° 2 x 8 | 4445 | Zwart | 2× |
| Bag / Briefcase | 4449 | Roodbruin | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger on Side, without Groove | 44567b | Lichtblauwgrijs | 2× |
| Plate 1 x 10 | 4477 | Lichtblauwgrijs | 4× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Zwart | 4× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 44874 | Zwart | 2× |
| Brick 1 x 2 x 5 without Side Supports | 46212 | Trans-Brown | 1× |
| Wedge Plate 12 x 3 Left | 47397 | Donkerblauwgrijs | 2× |
| Wedge Plate 12 x 3 Left | 47397 | Zwart | 1× |
| Wedge Plate 12 x 3 Right | 47398 | Donkerblauwgrijs | 2× |
| Wedge Plate 12 x 3 Right | 47398 | Zwart | 1× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Trans-lichtblauw | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Lichtblauwgrijs | 1× |
| Wedge Sloped 45° 2 x 4 Triple | 47759 | Donkerblauwgrijs | 2× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Zandkleur | 1× |
| Wedge Plate 6 x 4 Right | 48205 | Zwart | 2× |
| Wedge Plate 6 x 4 Right | 48205 | Donkerblauwgrijs | 3× |
| Wedge Plate 6 x 4 Left | 48208 | Donkerblauwgrijs | 3× |
| Wedge Plate 6 x 4 Left | 48208 | Zwart | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Zwart | 2× |
| Wedge Plate 8 x 3, 22° Right | 50304 | Donkerblauwgrijs | 2× |
| Wedge Plate 8 x 3, 22° Left | 50305 | Donkerblauwgrijs | 2× |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 53540 | Wit | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Donkerblauwgrijs | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Trans-donkerblauw | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 2× |
| Wedge Plate 6 x 3 Right | 54383 | Zwart | 1× |
| Wedge Plate 6 x 3 Right | 54383 | Donkerblauwgrijs | 2× |
| Wedge Plate 6 x 3 Left | 54384 | Zwart | 1× |
| Wedge Plate 6 x 3 Left | 54384 | Donkerblauwgrijs | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Donkerblauwgrijs | 2× |
| Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes | 55981 | Zwart | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Zwart | 4× |
| Slope 33° 3 x 6 No Inner Walls | 58181 | Trans-Brown | 2× |
| Panel 1 x 6 x 5 | 59349 | Trans-rood | 1× |
| Technic Axle 5.5 with Stop [Rounded Short End] | 59426 | Donkerblauwgrijs | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Geel | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Zwart | 4× |
| Cone 1 x 1 [Top Groove] | 59900 | Lichtblauwgrijs | 2× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Zwart | 1× |
| Plate 1 x 12 | 60479 | Zwart | 14× |
| Plate 1 x 12 | 60479 | Donkerblauwgrijs | 2× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Limoen | 1× |
| Technic Axle 9 | 60485 | Lichtblauwgrijs | 2× |
| Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 60581 | Rood | 2× |
| Brick 1 x 12 | 6112 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Lichtblauwgrijs | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Zwart | 28× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Zwart | 8× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-lichtblauw | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Metallic zilver | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Parel goud | 1× |
| Equipment Handcuffs | 61482 | Lichtblauwgrijs | 1× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Zwart | 2× |
| Plate Special 4 x 6 with Studs on 3 Edges | 6180 | Donkerblauwgrijs | 2× |
| Plate Special 4 x 6 with Studs on 3 Edges | 6180 | Lichtblauwgrijs | 6× |
| Tile 1 x 3 | 63864 | Zwart | 2× |
| Tile 1 x 3 | 63864 | Zandblauw | 3× |
| Bar 6L with Stop Ring | 63965 | Zwart | 2× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Metallic zilver | 1× |
| Technic Pin Double with Axle Hole - Squared Holes | 65098 | Zwart | 2× |
| Technic Axle Pin 3L without Friction Ridges and 2L Axle | 65249 | Wit | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Donkerblauwgrijs | 1× |
| Tile Special 2 x 3 with 2 Clips without Tab between Clips | 65886 | Donkerblauwgrijs | 2× |
| Plate Special 4 x 4 with Studs on Edges and Clips Horizontal | 66252 | Donkerblauwgrijs | 2× |
| Plate Special 4 x 4 with Studs on Edges and Clips Horizontal | 66252 | Zwart | 2× |
| Technic Beam 1 x 3 Thin | 6632 | Donkerblauwgrijs | 6× |
| Tile 1 x 6 with Groove | 6636 | Donkerblauwgrijs | 3× |
| Tile 1 x 6 with Groove | 6636 | Zwart | 3× |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 68568 | Zwart | 2× |
| Tile 2 x 6 | 69729 | Zwart | 1× |
| Tile 2 x 6 | 69729 | Donkerblauwgrijs | 8× |
| Hair Tail High, Curly | 69857 | Zwart | 1× |
| Slope Inverted 45° 4 x 4 Double with 2 Holes | 72454 | Donkerblauwgrijs | 3× |
| Brick Round 3 x 3 x 2 Recessed Center with 2 x 2 Studs and Axle Hole | 73111 | Lichtblauwgrijs | 4× |
| Technic Pin Long 3l, No Friction Ridges, with Stop and Hole | 77765 | Lichtblauwgrijs | 4× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Zandkleur | 2× |
| Plate 1 x 5 | 78329 | Lichtblauwgrijs | 6× |
| Wedge Plate 6 x 2 Left | 78443 | Zwart | 1× |
| Wedge Plate 6 x 2 Right | 78444 | Zwart | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Zwart | 4× |
| Rotation Joint Socket with 2 Pins | 80563 | Donkerblauwgrijs | 2× |
| Cone 1.17 x 1.17 x 2/3 (Fez) | 85975 | Parel goud | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Donkerblauwgrijs | 47× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zwart | 4× |
| Slope 30° 1 x 2 x 2/3 with Buttons And Red Screens Print | 85984pr0006 | Donkerblauwgrijs | 2× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Lichtblauwgrijs | 6× |
| Tile 2 x 4 with Groove | 87079 | Donkerblauwgrijs | 1× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Rood | 2× |
| Bar 5L with Handle (Friction Ram) | 87618 | Zwart | 2× |
| Hair Mid-Length Tousled with Center Part | 88283 | Zwart | 1× |
| Plate Special 3 x 4 with 1 x 4 Center Studs [Plain] | 88646 | Lichtblauwgrijs | 1× |
| Technic Pin 1/2 with Friction | 89678 | Rood | 16× |
| Plate Special 4 x 6 with Trap Door Hinge [Long Pins] | 92099 | Donkerblauwgrijs | 5× |
| Plate 8 x 16 | 92438 | Zwart | 1× |
| Wedge Plate 10 x 10 Cut Corner [No Centre Studs] | 92584 | Donkerblauwgrijs | 2× |
| Weapon Gun / Blaster Small (Star Wars) | 92738 | Zwart | 3× |
| Brick Round 2 x 2 [Grill] | 92947 | Zwart | 2× |
| Panel 1 x 2 x 1 with Rounded Corners and Central Divider | 93095 | Roodbruin | 1× |
| Brick and Axle Separator v2.0 | 96874 | Oranje | 1× |
| Tile Round 1 x 1 | 98138 | Trans-rood | 6× |
| Tile Round 1 x 1 with Thermal Detonator Print | 98138pr0010 | Mat zilver | 2× |
| Brick Special 1 x 2 with Masonry Brick Profile | 98283 | Donkerblauwgrijs | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Zandkleur | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Pearl Titanium | 4× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Lichtblauwgrijs | 1× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Donkerblauwgrijs | 2× |
| Hat Brimmed | 2010 | Donkerbruin | 1× |
| Hips and Dark Brown Legs with Robe, Silver Belt, Knee Pads, Toes print | 970c07pr2376 | Donkerbruin | 1× |
| Torso Jacket, Pearl Titanium Trim, Belt print, Black Arms, Dark Bluish Gray Hands | 973c03h12pr6239 | Donkerbruin | 1× |
| Minifig Neckwear Breathing Apparatus (Cad Bane) | 2012 | Mat zilver | 1× |
| Minifig Head Cad Bane, Narrow Set Red Eyes, Breathing Apparatus Ports Print | 3626cpr3810 | Pearl Titanium | 1× |
| Hips and Black Legs with Gray Coattails with Orange Panels Print | 970c03pr2148 | Zwart | 1× |
| Torso Armor, Dark Oranges Stripes on Arms print, Black Arms and Hands (Fennec Shand) | 973c03h03pr5774 | Zwart | 1× |
| Minifig Head Fennec Shand, Cheek Lines, Dark Red Lips, Raised Left Eyebrow / Smirk Print | 3626cpr3569 | Licht nougat | 1× |
| Helmet, Raised Centre Ridge, Eye Slot, with Black Faceguard Print | 78642pr0001 | Oranje | 1× |
| Hips and Pearl Titanium Legs with Silver Armor Panels and Belt, Dark Red Toes Print | 970c75pr1921 | Zwart | 1× |
| Minifig Head Hunter, Red Headband, Dark Bluish Gray Left Side, Serious, Open Mouth / Closed Mouth Print | 3626cpr3254 | Nougat | 1× |
| Helmet Clone Trooper Phase 2, Closed Front, Black Visor and Dark Red Markings Print | 11217pr0317 | Pearl Titanium | 1× |
| Torso Clone Trooper Armor, Dark Red Stripe print (Hunter / Wrecker), Pearl Titanium Arms, Black Hands | 973c75h03pr5227 | Pearl Titanium | 1× |
| Legs Short | 41879a | Zwart | 1× |
| Minifig Head Omega, Reddish Brown Eyebrows, Slight Smile / Angry Open Mouth Print | 3626cpr3815 | Nougat | 1× |
| Hair Tousled, Short | 36762 | Zandkleur | 1× |
| Torso, Sand Blue Accents, Dark Blue Belt, Red Stripes on Arms print, Sand Blue Arms, Nougat Hands | 973c24h13pr6248 | Wit | 1× |
Bouw-DNA
Onderdeleninzichten voor The Justifier
Met 1.023 onderdelen zit deze build +110% ten opzichte van de gemiddelde Star Wars set en +76% ten opzichte van de gemiddelde release uit 2022.
T.o.v. gemiddelde Star Wars set
Gemiddelde Star Wars set: 487 onderdelen over 853 andere sets.
T.o.v. gemiddelde set uit 2022
Gemiddelde set uit 2022: 580 onderdelen over 467 andere sets.
Kleurprofiel
Dominante kleur
Zwart
Unieke onderdelen
4 onderdelen per uniek type
Herhalingsfactor
Gemiddeld aantal onderdelen per uniek type.
Meest gebruikte onderdeel
Slope 30? 1 x 2 x 2/3
51xResultaten zijn gebaseerd op officiële LEGO onderdelen inventarissen. Nauwkeurigheid verbetert naarmate je set compleetheid bevestigt.
Deze site is niet gelieerd aan of goedgekeurd door de LEGO Groep.


![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037746.jpg)





![Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6047276.jpg)
