


Battle Droid with STAP
🏷️ 75428-1•🎨 Star Wars•📅 2025•🧱 1088 onderdelen•Gevorderd
LEGO Star Wars 75428-1 Battle Droid with STAP is gemaakt als Star Wars-displaymodel rond Battle Droid. De set draait om de vorm, het silhouet en de filmherkenning van het schip of object, met displaystandaard, gereedschap, Battle Droid als duidelijke presentatiepunten. Daardoor past hij vooral bij fans die een herkenbaar Star Wars-voertuig of icoon zichtbaar willen neerzetten.
Onderdelen inventaris
| Onderdeel | Kleur | Aantal |
|---|---|---|
![]() Sticker Sheet for Set 75428-1 10114373 | Unknown | 1× |
![]() Bar Holder with Clip 11090 | Zandkleur | 1× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Zandkleur | 5× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Roodbruin | 4× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Zandkleur | 2× |
![]() Plate 3 x 3 11212 | Zwart | 6× |
![]() Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle 11214 | Donkerblauwgrijs | 2× |
![]() Tile Round 1 x 2 1126 | Zwart | 2× |
![]() Wedge Curved 3 x 4 x 2/3 Cutout 11291 | Zandkleur | 1× |
![]() Plate Special 1 x 2 with Pin Hole on Top 11458 | Zwart | 1× |
10 van 337 onderdelen getoond
🔓 Meld je aan om alle onderdelen te zien| Plate 3 x 3 | 11212 | Zwart | 6× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Donkerblauwgrijs | 2× |
| Tile Round 1 x 2 | 1126 | Zwart | 2× |
| Wedge Curved 3 x 4 x 2/3 Cutout | 11291 | Zandkleur | 1× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Zwart | 1× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Lichtblauwgrijs | 3× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zandkleur | 6× |
| Cone 1 x 1 Inverted with Bar at Bottom (Ice Cream Cone) | 11610 | Zandkleur | 2× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Lichtblauwgrijs | 1× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Lichtblauwgrijs | 3× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Zandkleur | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Donkerblauwgrijs | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zandkleur | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zwart | 2× |
| Plate 3 x 3 Cross | 15397 | Zwart | 2× |
| Technic Axle 5 with Stop | 15462 | Roodbruin | 2× |
| Tile Round 2 x 2 with Hole with Turbine print | 15535pr0001 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Lichtblauwgrijs | 3× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Zandkleur | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Donkerblauwgrijs | 2× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Zandkleur | 4× |
| Plate Round 1 x 2 Half Circle with Stud (Jumper) | 1745 | Zwart | 2× |
| Tile 4 x 4 | 1751 | Zwart | 2× |
| Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 18653 | Roodbruin | 4× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Roodbruin | 2× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Lichtblauwgrijs | 2× |
| Slope Inverted 45° 3 x 1 Double with 2 Blocked Open Studs | 18759 | Zandkleur | 1× |
| Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] | 1927 | Zandkleur | 6× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Zwart | 1× |
| Plate Special 1 x 2 with End Towball | 22890 | Donkerblauwgrijs | 4× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Zwart | 2× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Donkerblauwgrijs | 2× |
| Panel 1 x 2 x 1 with Rounded Corners and 2 Sides | 23969 | Roodbruin | 1× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Zwart | 1× |
| Plate 2 x 2 Corner | 2420 | Lichtblauwgrijs | 2× |
| Plate 2 x 2 Corner | 2420 | Zandkleur | 4× |
| Plate 2 x 2 Corner | 2420 | Donkerblauwgrijs | 2× |
| Plate 2 x 2 Corner | 2420 | Roodbruin | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Zandkleur | 4× |
| Slope Curved 2 x 1 Inverted | 24201 | Zwart | 3× |
| Slope Curved 2 x 1 Inverted | 24201 | Roodbruin | 1× |
| Slope Curved 2 x 1 Inverted | 24201 | Donkerblauwgrijs | 2× |
| Tile Round 1 x 1 Half Circle | 24246 | Zwart | 3× |
| Tile Round 1 x 1 Half Circle | 24246 | Zandkleur | 2× |
| Slope Curved 3 x 2 No Studs | 24309 | Zwart | 4× |
| Tile 1 x 4 with Groove | 2431 | Zandkleur | 4× |
| Tile 1 x 4 with Groove | 2431 | Roodbruin | 12× |
| Technic Axle 3 with Stop | 24316 | Roodbruin | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Zandkleur | 4× |
| Tile Round 1 x 1 Quarter | 25269 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Zandkleur | 2× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Lichtblauwgrijs | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Zandkleur | 2× |
| Tile 2 x 3 | 26603 | Roodbruin | 7× |
| Tile 2 x 3 | 26603 | Zwart | 2× |
| Tile 2 x 3 | 26603 | Donkerblauwgrijs | 1× |
| Technic Disc 3 x 3 with Light Bluish Grey Lines print (Fan Blades) | 2723pr0003 | Zwart | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Roodbruin | 8× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Zwart | 5× |
| Brick 1 x 2 | 3004 | Zwart | 4× |
| Brick 1 x 2 | 3004 | Roodbruin | 2× |
| Brick 1 x 1 | 3005 | Zwart | 6× |
| Brick 1 x 1 | 3005 | Roodbruin | 6× |
| Plate 2 x 4 | 3020 | Zandkleur | 4× |
| Plate 2 x 4 | 3020 | Lichtblauwgrijs | 4× |
| Plate 2 x 3 | 3021 | Roodbruin | 2× |
| Plate 2 x 3 | 3021 | Zwart | 2× |
| Plate 2 x 3 | 3021 | Zandkleur | 5× |
| Plate 2 x 2 | 3022 | Roodbruin | 1× |
| Plate 2 x 2 | 3022 | Zandkleur | 5× |
| Plate 1 x 2 | 3023 | Donkerblauwgrijs | 4× |
| Plate 1 x 2 | 3023 | Zandkleur | 3× |
| Plate 1 x 2 | 3023 | Wit | 2× |
| Plate 1 x 2 | 3023 | Geel | 7× |
| Plate 1 x 2 | 3023 | Zwart | 1× |
| Plate 1 x 2 | 3023 | Roodbruin | 12× |
| Plate 1 x 1 | 3024 | Zwart | 4× |
| Plate 1 x 1 | 3024 | Zandkleur | 11× |
| Plate 1 x 1 | 3024 | Roodbruin | 6× |
| Plate 1 x 1 | 3024 | Donkerblauwgrijs | 6× |
| Slope 18° 4 x 2 | 30363 | Zwart | 4× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Donkerblauwgrijs | 2× |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | 30383 | Zwart | 2× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Roodbruin | 2× |
| Slope Curved 2 x 2 with Lip, No Studs | 30602 | Zandkleur | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Zwart | 3× |
| Tile 2 x 2 with Groove | 3068b | Zwart | 2× |
| Tile 2 x 2 with Groove | 3068b | Roodbruin | 1× |
| Tile 2 x 2 with Groove | 3068b | Zandkleur | 1× |
| Tile 1 x 2 with Groove | 3069b | Roodbruin | 3× |
| Tile 1 x 2 with Groove | 3069b | Donkerblauwgrijs | 3× |
| Tile 1 x 2 with Groove | 3069b | Zwart | 4× |
| Tile 1 x 1 with Groove | 3070b | Zandkleur | 10× |
| Tile 1 x 1 with Groove | 3070b | Roodbruin | 10× |
| Tile 1 x 1 with Groove | 3070b | Zwart | 1× |
| Animal / Creature Body Part, Claw with Clip | 3171 | Zandkleur | 6× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Donkerblauwgrijs | 4× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Zandkleur | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Zandkleur | 5× |
| Technic Axle 2 Notched | 32062 | Rood | 2× |
| Technic Axle 2 Notched | 32062 | Zwart | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Zandkleur | 4× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Lichtblauwgrijs | 6× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Geel | 1× |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 32124 | Zwart | 2× |
| Technic Gear 20 Tooth Bevel | 32198 | Zandkleur | 6× |
| Technic Beam 1 x 4 Thin | 32449 | Zwart | 4× |
| Technic Beam 1 x 7 Thick | 32524 | Zwart | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Roodbruin | 1× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Roodbruin | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Zwart | 5× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Zandkleur | 4× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Zwart | 12× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Roodbruin | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Zandkleur | 4× |
| Plate 1 x 8 | 3460 | Zandkleur | 1× |
| Plate 1 x 8 | 3460 | Zwart | 5× |
| Plate 1 x 8 | 3460 | Roodbruin | 3× |
| Brick Special 1 x 2 with Vertical Closed Handle on Edge | 34816 | Donkerblauwgrijs | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Zwart | 1× |
| Wedge Sloped 2 x 5 Left | 3504 | Roodbruin | 5× |
| Wedge Sloped 2 x 5 Right | 3505 | Roodbruin | 5× |
| Technic Driving Ring Extension, 8 Ridges | 35186 | Donkerblauwgrijs | 4× |
| Technic Driving Ring Extension, 8 Ridges | 35186 | Zandkleur | 2× |
| Dish 4 x 4 Inverted with Open Stud [Radar] | 35394 | Trans-doorzichtig | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Donkerblauwgrijs | 6× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Roodbruin | 9× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zandkleur | 13× |
| Brick Curved 1 x 2 x 2/3 Double Curved Top, No Studs | 3563 | Roodbruin | 11× |
| Brick 1 x 3 | 3622 | Zandkleur | 1× |
| Plate 1 x 3 | 3623 | Roodbruin | 19× |
| Plate 1 x 3 | 3623 | Donkerblauwgrijs | 1× |
| Plate 1 x 3 | 3623 | Lichtblauwgrijs | 3× |
| Plate 1 x 3 | 3623 | Zandkleur | 9× |
| Plate 1 x 3 | 3623 | Rood | 4× |
| Plate 1 x 3 | 3623 | Zwart | 4× |
| Technic Gear 24 Tooth [New Style with Single Axle Hole] | 3648b | Donkerblauwgrijs | 2× |
| Plate Round 1 x 1 with Vertical Bar | 3661 | Zwart | 1× |
| Plate 1 x 6 | 3666 | Zandkleur | 2× |
| Plate 1 x 6 | 3666 | Zwart | 1× |
| Plate 1 x 6 | 3666 | Limoen | 1× |
| Equipment Wand [Individual] | 36752a | Lichtblauwgrijs | 1× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Donkerblauwgrijs | 1× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Zandkleur | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Roodbruin | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Zandkleur | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Lichtblauwgrijs | 5× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Donkerblauwgrijs | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Zwart | 1× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Zwart | 2× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Zwart | 2× |
| Plate 1 x 4 | 3710 | Roodbruin | 5× |
| Plate 1 x 4 | 3710 | Zwart | 5× |
| Plate 1 x 4 | 3710 | Zandkleur | 2× |
| Plate 2 x 6 | 3795 | Zandkleur | 1× |
| Plate 2 x 6 | 3795 | Zwart | 6× |
| Plate 2 x 10 | 3832 | Roodbruin | 2× |
| Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 3839b | Donkerblauwgrijs | 1× |
| Antenna 1 x 4 with Flat Top | 3957b | Trans-doorzichtig | 1× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Donkerblauwgrijs | 2× |
| Brick Special 1 x 1 with Headlight | 4070 | Roodbruin | 6× |
| Brick Special 1 x 1 with Headlight | 4070 | Zwart | 2× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Zandkleur | 2× |
| Technic Cylinder 4 x 4 with Pin Holes and Centre Bar, Closed Sides on Bar | 41531 | Roodbruin | 4× |
| Tile 1 x 8 with Groove | 4162 | Zwart | 6× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Zwart | 6× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Zandkleur | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Lichtblauwgrijs | 2× |
| Plate 2 x 16 | 4282 | Zwart | 1× |
| Slope 33° 3 x 1 | 4286 | Roodbruin | 2× |
| Slope 33° 3 x 1 | 4286 | Zwart | 1× |
| Slope 33° 3 x 1 | 4286 | Zandkleur | 1× |
| Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection | 4287c | Roodbruin | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Zwart | 7× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Roodbruin | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 2× |
| Equipment Weapon, Loudhailer / Speaker / Blaster / Space Gun | 4349 | Zwart | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Zandkleur | 4× |
| Wedge Plate 3 x 2 Left | 43723 | Zandkleur | 4× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Zandkleur | 6× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Roodbruin | 2× |
| Plate 1 x 10 | 4477 | Roodbruin | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Geel | 3× |
| Slope 1 x 6 x 1 with 1 x 2 x 1/3 Cutout | 4569 | Roodbruin | 10× |
| Brick Special 1 x 2 x 2/3 with Studs on Sides | 4595 | Zwart | 2× |
| Pneumatic T-Piece (T Bar) [New Style] | 4697b | Lichtblauwgrijs | 1× |
| Pneumatic T-Piece (T Bar) [New Style] | 4697b | Zwart | 1× |
| Brick Special 1 x 1 Studs on 4 Sides | 4733 | Donkerblauwgrijs | 1× |
| Wedge Plate 12 x 3 Left | 47397 | Roodbruin | 1× |
| Wedge Plate 12 x 3 Right | 47398 | Roodbruin | 1× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Zwart | 3× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Zandkleur | 4× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Zandkleur | 1× |
| Tile Special 2 x 2 with Top Pin [Squared Holes] | 49153 | Zwart | 2× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Zandkleur | 2× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Roodbruin | 1× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Zwart | 1× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Zwart | 1× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Zwart | 1× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Roodbruin | 3× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Lichtblauwgrijs | 2× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Zwart | 8× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Geel | 4× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Donker zandkleur | 3× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Zandkleur | 4× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Zwart | 6× |
| Technic Ball Joint with Through Axle Hole | 53585 | Zandkleur | 8× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zandkleur | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Geel | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Roodbruin | 3× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 1× |
| Wedge Plate 6 x 3 Right | 54383 | Roodbruin | 2× |
| Wedge Plate 6 x 3 Left | 54384 | Roodbruin | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Zwart | 2× |
| Technic Axle 8 with Stop | 55013 | Donkerblauwgrijs | 2× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Rood | 2× |
| Bracket 5 x 1 x 1 1/3 | 5712 | Zwart | 3× |
| Bracket 5 x 1 x 1 1/3 | 5712 | Roodbruin | 3× |
| Weapon Gun / Blaster Short (Star Wars) | 58247 | Pearl Titanium | 1× |
| Arm Mechanical Straight (Droid) [2 Clips at 90°] | 59230 | Zandkleur | 1× |
| Cone 1 x 1 [Top Groove] | 59900 | Roodbruin | 2× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Donker zandkleur | 1× |
| Brick Special 1 x 1 with Clip Horizontal | 60476 | Lichtblauwgrijs | 1× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Roodbruin | 1× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Zwart | 4× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Zandkleur | 4× |
| Plate 1 x 12 | 60479 | Zwart | 7× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Zwart | 4× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Roodbruin | 2× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Trans-doorzichtig | 3× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Zandkleur | 2× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Zwart | 3× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Zwart | 1× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Roodbruin | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Zandkleur | 24× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Roodbruin | 5× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Donker zandkleur | 4× |
| Plate Special 6 x 12 with Studs on 3 Edges with 'STAR WARS Single Trooper Aerial Platform', Stats print | 6178pr0017 | Zwart | 1× |
| Brick Curved 2 x 4 Double, No Studs, with Black Screws/Eyes, Dark Tan Lines print (Battle Droid Face) | 6192bpr0002 | Zandkleur | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Roodbruin | 4× |
| Tile 1 x 3 | 63864 | Roodbruin | 6× |
| Tile 1 x 3 | 63864 | Zandkleur | 3× |
| Tile 1 x 3 | 63864 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Zwart | 2× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Medium azuur | 1× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Roodbruin | 1× |
| Technic Axle and Pin Connector Perpendicular Triple | 63869 | Zwart | 1× |
| Bar 6L with Stop Ring | 63965 | Zwart | 1× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Lichtblauwgrijs | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Roodbruin | 6× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Rood | 2× |
| Wedge Plate 2 x 4 27° Right | 65426 | Roodbruin | 2× |
| Wedge Plate 2 x 4 27° Right | 65426 | Zandkleur | 2× |
| Wedge Plate 2 x 4 27° Left | 65429 | Roodbruin | 2× |
| Wedge Plate 2 x 4 27° Left | 65429 | Zandkleur | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Zwart | 1× |
| Technic Axle 3 with Stud | 6587 | Donker zandkleur | 7× |
| Technic Gear 12 Tooth Bevel | 6589 | Zandkleur | 2× |
| Tile 1 x 6 with Groove | 6636 | Zandkleur | 2× |
| Weapon Hilt Symmetric | 66909 | Zwart | 1× |
| Weapon Hilt Symmetric | 66909 | Zandkleur | 4× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Donkerblauwgrijs | 2× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Zandkleur | 6× |
| Tile 2 x 6 | 69729 | Zandkleur | 2× |
| Tile 2 x 6 | 69729 | Zwart | 6× |
| Bar, U-Shape 2 x 3 | 7052 | Zwart | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Roodbruin | 2× |
| Brick Round 3 x 3 x 2 Recessed Center with 2 x 2 Studs and Axle Hole | 73111 | Roodbruin | 2× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Lichtblauwgrijs | 2× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Zandkleur | 6× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Rood | 4× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Donkerblauwgrijs | 4× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Zandkleur | 6× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Roodbruin | 6× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Zwart | 4× |
| Plate 2 x 3 with 1 x 1 Cutout | 73831 | Lichtblauwgrijs | 9× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Zwart | 2× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Zwart | 1× |
| Plate Special 1 x 1 with Handle on 2 Ends | 78257 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 1 with Handle on 2 Ends | 78257 | Zandkleur | 1× |
| Bar 2L with Stop in Center | 78258 | Zwart | 1× |
| Bar 2L with Stop in Center | 78258 | Zandkleur | 2× |
| Bar 2L with Stop in Center | 78258 | Roodbruin | 4× |
| Plate 1 x 5 | 78329 | Zandkleur | 6× |
| Plate 1 x 5 | 78329 | Donkerblauwgrijs | 1× |
| Plate 1 x 5 | 78329 | Lichtblauwgrijs | 1× |
| Wedge Plate 6 x 2 Left | 78443 | Zwart | 1× |
| Wedge Plate 6 x 2 Right | 78444 | Zwart | 1× |
| Brick Curved 2 x 1 with Inverted Cutout | 78666 | Roodbruin | 4× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Zandkleur | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Roodbruin | 6× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Lichtblauwgrijs | 3× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Donkerblauwgrijs | 4× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Zwart | 3× |
| Plate Round 1 x 1 with Open Stud | 85861 | Donkerblauwgrijs | 6× |
| Plate Round 1 x 1 with Open Stud | 85861 | Zwart | 11× |
| Technic Brick 1 x 2 with Hole and Dual Beam Extensions | 85943 | Donkerblauwgrijs | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Roodbruin | 6× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zandkleur | 2× |
| Tile 2 x 4 with Groove | 87079 | Zandkleur | 2× |
| Technic Axle 4 with Stop | 87083 | Donkerblauwgrijs | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Zandkleur | 3× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Zwart | 1× |
| Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 1 Support Wall on Bottom | 87609 | Roodbruin | 4× |
| Bar 3L | 87994 | Zandkleur | 2× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Zandkleur | 1× |
| Technic Pin 1/2 with Friction | 89678 | Rood | 6× |
| Technic Pin 1/2 with Friction | 89678 | Donkerblauwgrijs | 2× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Zwart | 2× |
| Weapon Sword / Foil / Épée | 93550 | Mat zilver | 1× |
| Slope Curved 3 x 4 x 2/3 Triple Curved with 2 Sunk Studs | 93604 | Zandkleur | 2× |
| Slope Curved 4 x 2 No Studs | 93606 | Roodbruin | 1× |
| Slope Curved 4 x 2 No Studs | 93606 | Donkerblauwgrijs | 1× |
| Brick and Axle Separator v2.0 | 96874 | Oranje | 1× |
| Tile Round 1 x 1 | 98138 | Roodbruin | 1× |
| Tile Round 1 x 1 | 98138 | Zwart | 8× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Donker zandkleur | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Zandkleur | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Zwart | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Roodbruin | 6× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Zwart | 1× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Zandkleur | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Zwart | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Donkerblauwgrijs | 6× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Zandkleur | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Zwart | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Zandkleur | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Roodbruin | 5× |
Bouw-DNA
Onderdeleninzichten voor Battle Droid with STAP
Met 1.088 onderdelen zit deze build +123% ten opzichte van de gemiddelde Star Wars set en +71% ten opzichte van de gemiddelde release uit 2025.
T.o.v. gemiddelde Star Wars set
Gemiddelde Star Wars set: 487 onderdelen over 853 andere sets.
T.o.v. gemiddelde set uit 2025
Gemiddelde set uit 2025: 636 onderdelen over 561 andere sets.
Kleurprofiel
Dominante kleur
Zandkleur
Unieke onderdelen
5.2 onderdelen per uniek type
Herhalingsfactor
Gemiddeld aantal onderdelen per uniek type.
Meest gebruikte onderdeel
Plate 1 x 3
40xResultaten zijn gebaseerd op officiële LEGO onderdelen inventarissen. Nauwkeurigheid verbetert naarmate je set compleetheid bevestigt.
Deze site is niet gelieerd aan of goedgekeurd door de LEGO Groep.


![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6042952.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6045941.jpg)





