


De LEGO Horizon Forbidden West Tallneck (76989-1) is een gedetailleerd 1222-delig model dat de indrukwekkende Communicatieklasse-machine nabouwt. Het kenmerkende silhouet van de Tallneck omvat een glad, schijfvormig hoofd, gevormd met slimme bouwtechnieken, en lange, beweegbare poten. Deze set bevat een Aloy-minifiguur met haar specifieke wapens, gereed voor verkenning van de Verboden West, naast een Watcher-figuur met keuze uit blauwe, gele of rode ogen. De iconische Tallneck staat op een van stenen gebouwde landschapsdisplay, compleet met een gedetailleerde berkenboom en een roestig stoplicht, die de unieke post-apocalyptische spelwereld uitbeelden.
Onderdelen inventaris
| Onderdeel | Kleur | Aantal |
|---|---|---|
![]() Weapon Sword (Uruk-hai) 10050 | Parel goud | 5× |
![]() Sticker Sheet for Set 76989-1 10078254 | Unknown | 1× |
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Zwart | 4× |
![]() Bar Holder with Clip 11090 | Roodbruin | 1× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Wit | 6× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Zwart | 4× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Zwart | 3× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Zandkleur | 2× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Lichtblauwgrijs | 4× |
![]() Plate 3 x 3 11212 | Lichtblauwgrijs | 2× |
10 van 347 onderdelen getoond
🔓 Meld je aan om alle onderdelen te zien| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Zwart | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Zwart | 3× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Zandkleur | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Lichtblauwgrijs | 4× |
| Plate 3 x 3 | 11212 | Lichtblauwgrijs | 2× |
| Plate 3 x 3 | 11212 | Lichtblauwgrijs | 2× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Zwart | 1× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Zwart | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zandblauw | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Donkergroen | 5× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Lichtblauwgrijs | 3× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Wit | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Donkerblauwgrijs | 2× |
| Plate Round 4 x 4 with 2 x 2 Round Opening | 11833 | Zwart | 1× |
| Slope Curved 4 x 1 Inverted | 13547 | Zwart | 2× |
| Wedge Sloped 45° 2 x 2 Corner | 13548 | Lichtblauwgrijs | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Lichtblauwgrijs | 8× |
| Tile 2 x 2 Corner | 14719 | Zwart | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Wit | 5× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zandkleur | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zwart | 2× |
| Plate Special 2 x 2 with Towball and Hole | 15456 | Zwart | 4× |
| Helicopter Landing Ski 1 x 6 with Pin Hole | 15540 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Wit | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Donkergroen | 6× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Lichtblauwgrijs | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Zwart | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Zwart | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Lichtblauwgrijs | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Wit | 4× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Wit | 1× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Zwart | 2× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Zwart | 1× |
| Sports Snowboard Small | 18746 | Lichtblauwgrijs | 4× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Zwart | 2× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Lichtblauwgrijs | 1× |
| Tile Special 2 x 3 Pentagonal | 22385 | Wit | 2× |
| Tile Special 2 x 3 Pentagonal | 22385 | Zandkleur | 4× |
| Tile Special 2 x 3 Pentagonal | 22385 | Lichtblauwgrijs | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Zandkleur | 8× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Wit | 2× |
| Bar Holder with Hole and Bar Handle | 23443 | Zwart | 1× |
| Brick 2 x 2 Corner | 2357 | Zandkleur | 1× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Mat zilver | 8× |
| Plant, Leaves 6 x 5 | 2417 | Helder licht oranje | 3× |
| Plate 2 x 2 Corner | 2420 | Zwart | 2× |
| Plate 2 x 2 Corner | 2420 | Lichtblauwgrijs | 1× |
| Plate 2 x 2 Corner | 2420 | Donkerblauwgrijs | 5× |
| Plate 2 x 2 Corner | 2420 | Lichtblauwgrijs | 6× |
| Plate 2 x 2 Corner | 2420 | Donker zandkleur | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Wit | 8× |
| Wedge Plate 2 x 2 Left | 24299 | Zwart | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Zwart | 1× |
| Tile 1 x 4 with Groove | 2431 | Zwart | 6× |
| Tile 1 x 4 with Groove | 2431 | Donkerblauwgrijs | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Donker zandkleur | 1× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Lichtblauwgrijs | 1× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Donkergroen | 2× |
| Plant, Flower Stem with Bottom Bar | 24855 | Lichtblauwgrijs | 7× |
| Plant, Flower, Plate Round 1 x 1 with 5 Petals | 24866 | Light Aqua | 3× |
| Plant, Flower, Plate Round 1 x 1 with 5 Petals | 24866 | Zwart | 1× |
| Plant, Flower, Plate Round 1 x 1 with 5 Petals | 24866 | Rood | 6× |
| Tile Round 1 x 1 Quarter | 25269 | Donkerblauwgrijs | 6× |
| Tile Round 1 x 1 Quarter | 25269 | Zandkleur | 6× |
| Tile Round 1 x 1 Quarter | 25269 | Wit | 8× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Wit | 4× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Zwart | 3× |
| Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 26599 | Lichtblauwgrijs | 1× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Donker zandkleur | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Wit | 4× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Lichtblauwgrijs | 4× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Zwart | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Lichtblauwgrijs | 4× |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 26604 | Zwart | 4× |
| Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 26604 | Zandkleur | 2× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Zandblauw | 2× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Donkerblauwgrijs | 4× |
| Tile 4 x 4 Curved, Macaroni | 27507 | Donkerblauwgrijs | 2× |
| Tile 4 x 4 Curved, Macaroni | 27507 | Wit | 4× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Wit | 2× |
| Zipline, 22L with 2 Connectors - Flexible | 27965 | Donkergroen | 1× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Zwart | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Wit | 5× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Wit | 2× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Zwart | 8× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Zandgroen | 1× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Zandkleur | 7× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Zandgroen | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Zandkleur | 7× |
| Plate Special 1 x 4 with Wheels Holder | 2926 | Zwart | 1× |
| Brick 2 x 3 | 3002 | Wit | 2× |
| Brick 2 x 2 | 3003 | Zandkleur | 1× |
| Brick 1 x 2 | 3004 | Oranje | 14× |
| Brick 1 x 2 | 3004 | Zandkleur | 4× |
| Brick 1 x 2 | 3004 | Wit | 2× |
| Brick 1 x 1 | 3005 | Rood | 1× |
| Brick 1 x 1 | 3005 | Zwart | 2× |
| Brick 1 x 1 | 3005 | Medium azuur | 12× |
| Brick 1 x 1 | 3005 | Lichtblauwgrijs | 2× |
| Brick 1 x 8 | 3008 | Wit | 1× |
| Brick 1 x 4 | 3010 | Wit | 5× |
| Headwear Accessory Plume / Feathers with Pin | 30126 | Rood | 1× |
| Plate 2 x 4 | 3020 | Zwart | 3× |
| Plate 2 x 4 | 3020 | Lichtblauwgrijs | 5× |
| Plate 2 x 4 | 3020 | Lichtblauwgrijs | 5× |
| Plate 2 x 4 | 3020 | Wit | 6× |
| Plate 2 x 4 | 3020 | Donkerblauwgrijs | 2× |
| Plate 2 x 3 | 3021 | Oranje | 1× |
| Plate 2 x 3 | 3021 | Geel | 2× |
| Plate 2 x 3 | 3021 | Zwart | 11× |
| Plate 2 x 2 | 3022 | Wit | 6× |
| Plate 2 x 2 | 3022 | Zwart | 2× |
| Plate 2 x 2 | 3022 | Lichtblauwgrijs | 2× |
| Plate 2 x 2 | 3022 | Lichtblauwgrijs | 1× |
| Plate 2 x 2 | 3022 | Donkerblauwgrijs | 5× |
| Plate 2 x 2 | 3022 | Donker zandkleur | 1× |
| Plate 2 x 2 | 3022 | Zandkleur | 1× |
| Plate 1 x 2 | 3023 | Donkerblauwgrijs | 16× |
| Plate 1 x 2 | 3023 | Lichtblauwgrijs | 2× |
| Plate 1 x 2 | 3023 | Zwart | 9× |
| Plate 1 x 2 | 3023 | Zandblauw | 4× |
| Plate 1 x 2 | 3023 | Rood | 5× |
| Plate 1 x 2 | 3023 | Wit | 27× |
| Plate 1 x 2 | 3023 | Donkergroen | 4× |
| Plate 1 x 2 | 3023 | Zandkleur | 4× |
| Plate 1 x 1 | 3024 | Donkerblauwgrijs | 15× |
| Plate 1 x 1 | 3024 | Lichtblauwgrijs | 4× |
| Plate 1 x 1 | 3024 | Zwart | 8× |
| Plate 1 x 1 | 3024 | Wit | 12× |
| Plate 1 x 1 | 3024 | Oranje | 6× |
| Plate 1 x 1 | 3024 | Geel | 6× |
| Plate 1 x 1 | 3024 | Donkergroen | 6× |
| Plate 4 x 10 | 3030 | Lichtblauwgrijs | 1× |
| Plate 4 x 10 | 3030 | Lichtblauwgrijs | 1× |
| Plate 2 x 8 | 3034 | Donkerblauwgrijs | 1× |
| Plate 2 x 8 | 3034 | Wit | 1× |
| Plate 6 x 8 | 3036 | Donker zandkleur | 1× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Parel goud | 1× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Roodbruin | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | 30383 | Zwart | 4× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Zwart | 8× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Wit | 15× |
| Plate Round Corner 4 x 4 | 30565 | Lichtblauwgrijs | 4× |
| Slope Curved 2 x 2 with Lip, No Studs | 30602 | Wit | 5× |
| Tile 2 x 2 with Groove | 3068b | Zandblauw | 2× |
| Tile 2 x 2 with Groove | 3068b | Lichtblauwgrijs | 5× |
| Tile 2 x 2 with Groove | 3068b | Lichtblauwgrijs | 3× |
| Tile 2 x 2 with Groove | 3068b | Donker zandkleur | 2× |
| Tile 1 x 2 with Groove | 3069b | Zwart | 2× |
| Tile 1 x 2 with Groove | 3069b | Wit | 1× |
| Tile 1 x 1 with Groove | 3070b | Zandkleur | 2× |
| Tile 1 x 1 with Groove | 3070b | Zandblauw | 2× |
| Tile 1 x 1 with Groove | 3070b | Zwart | 3× |
| Tile 1 x 1 with Groove | 3070b | Donkerblauwgrijs | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Zwart | 2× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Zwart | 6× |
| Plate Special 1 x 2 with Door Rail | 32028 | Wit | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Zwart | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Lichtblauwgrijs | 1× |
| Technic Axle 2 Notched | 32062 | Rood | 4× |
| Technic Axle 2 Notched | 32062 | Zwart | 3× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Lichtblauwgrijs | 4× |
| Technic Axle 5 | 32073 | Lichtblauwgrijs | 3× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Lichtblauwgrijs | 2× |
| Technic Axle and Pin Connector Angled #4 - 135° | 32192 | Donkerblauwgrijs | 2× |
| Technic Axle and Pin Connector Angled #4 - 135° | 32192 | Wit | 3× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Rood | 1× |
| Plant, Plate 1 x 1 Round with 3 Leaves | 32607 | Geel | 9× |
| Plant, Plate 1 x 1 Round with 3 Leaves | 32607 | Helder groen | 9× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Wit | 1× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Zwart | 4× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Zwart | 2× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Wit | 2× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Donkerblauwgrijs | 13× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Zandblauw | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Zwart | 8× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Lichtblauwgrijs | 5× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Zandkleur | 2× |
| Plate 1 x 8 | 3460 | Zwart | 6× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Wit | 8× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Zwart | 5× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Lichtblauwgrijs | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Lichtblauwgrijs | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 2× |
| Plate 1 x 3 | 3623 | Zwart | 4× |
| Plate 1 x 3 | 3623 | Zandkleur | 1× |
| Plate 1 x 3 | 3623 | Donkerblauwgrijs | 2× |
| Brick Arch 1 x 4 | 3659 | Lichtblauwgrijs | 4× |
| Plate 1 x 6 | 3666 | Zandkleur | 16× |
| Plate 1 x 6 | 3666 | Wit | 8× |
| Plate 1 x 6 | 3666 | Donkerblauwgrijs | 2× |
| Slope 65° 2 x 2 x 2 with Bottom Tube | 3678b | Zwart | 3× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Donkerblauwgrijs | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Wit | 4× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Wit | 4× |
| Technic Axle 4 | 3705 | Rood | 4× |
| Technic Axle 6 | 3706 | Rood | 1× |
| Plate 1 x 4 | 3710 | Lichtblauwgrijs | 1× |
| Plate 1 x 4 | 3710 | Wit | 12× |
| Plate 1 x 4 | 3710 | Donkerblauwgrijs | 2× |
| Plate 1 x 4 | 3710 | Rood | 12× |
| Plate 1 x 4 | 3710 | Zwart | 13× |
| Plate 2 x 6 | 3795 | Zandkleur | 1× |
| Plate 2 x 6 | 3795 | Zwart | 3× |
| Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 3839b | Wit | 1× |
| Hinge Brick 1 x 2 Base | 3937 | Geel | 1× |
| Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | 40379 | Olive Green | 5× |
| Brick Special 1 x 1 with Headlight | 4070 | Lichtblauwgrijs | 4× |
| Brick Special 1 x 1 with Headlight | 4070 | Zwart | 8× |
| Brick Special 1 x 1 with Headlight | 4070 | Roodbruin | 1× |
| Brick Special 1 x 1 with Headlight | 4070 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Zandkleur | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Zwart | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Lichtblauwgrijs | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Lichtblauwgrijs | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Zandblauw | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Lichtblauwgrijs | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Lichtblauwgrijs | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Zandblauw | 1× |
| Technic Pin 1/2 | 4274 | Lichtblauwgrijs | 8× |
| Slope 33° 3 x 1 | 4286 | Zwart | 4× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 1× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Lichtblauwgrijs | 1× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Lichtblauwgrijs | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Zandblauw | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Zwart | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Wit | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Donker zandkleur | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Donkergroen | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Zandblauw | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Zwart | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Wit | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Donker zandkleur | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Donkergroen | 2× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | 44301b | Donkerblauwgrijs | 2× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Zwart | 4× |
| Plate 1 x 10 | 4477 | Donkerblauwgrijs | 2× |
| Plate 1 x 10 | 4477 | Lichtblauwgrijs | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Lichtblauwgrijs | 6× |
| Weapon Bow and Arrow [Large] | 4499 | Wit | 1× |
| Technic Axle 3 | 4519 | Lichtblauwgrijs | 2× |
| Brick Special 1 x 1 Studs on 4 Sides | 4733 | Lichtblauwgrijs | 1× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Zwart | 4× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Wit | 4× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Wit | 6× |
| Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 47458 | Wit | 1× |
| Wheel Arch, Curved Wedge 4 x 3 with 2 x 2 Opening and 4 Studs | 47755 | Wit | 2× |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] | 48171 | Zwart | 4× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Parel goud | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | 48729b | Donkerblauwgrijs | 1× |
| Tile Special 2 x 2 with Top Pin [Squared Holes] | 49153 | Donkerblauwgrijs | 4× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Zwart | 4× |
| Plate Special 1 x 1 with Tooth | 49668 | Wit | 3× |
| Wedge Plate 8 x 3, 22° Right | 50304 | Donkerblauwgrijs | 1× |
| Wedge Plate 8 x 3, 22° Left | 50305 | Donkerblauwgrijs | 1× |
| Slope Curved 3 x 1 No Studs | 50950 | Lichtblauwgrijs | 2× |
| Slope Curved 3 x 1 No Studs | 50950 | Zandkleur | 2× |
| Wedge Plate 2 x 4 | 51739 | Wit | 1× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Zwart | 1× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Wit | 3× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Lichtblauwgrijs | 1× |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots] | 53923 | Zwart | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Lichtblauwgrijs | 3× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Wit | 24× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Donkerblauwgrijs | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Zwart | 4× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Donkerblauwgrijs | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Roodbruin | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Donkerrood | 5× |
| Slope 65° 2 x 1 x 2 | 60481 | Zwart | 4× |
| Equipment Hose Nozzle / Gun with Side String Hole Simplified | 60849 | Lichtblauwgrijs | 2× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Oranje | 1× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Zwart | 2× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Lichtblauwgrijs | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-lichtblauw | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Lichtblauwgrijs | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-rood | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-geel | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Wit | 3× |
| Tile 1 x 3 | 63864 | Zandkleur | 2× |
| Bar 6L with Stop Ring | 63965 | Donkerblauwgrijs | 1× |
| Weapon Spike Flexible 3.5L | 64727 | Lichtblauwgrijs | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Zwart | 2× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Zwart | 1× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Lichtblauwgrijs | 14× |
| Plate Special 1 x 2 with Wheel Holder, Reinforced Underside | 66897 | Zwart | 4× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Wit | 6× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Donkerblauwgrijs | 4× |
| Bar Holder with Clip and 90° Angle (Mechanical Leg) | 72869 | Zwart | 2× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Zwart | 24× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Oranje | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Lichtblauwgrijs | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 1 with Handle on 2 Ends | 78257 | Zwart | 1× |
| Bar 2L with Stop in Center | 78258 | Donkerblauwgrijs | 1× |
| Bar 2L with Stop in Center | 78258 | Zwart | 2× |
| Bar 2L with Stop in Center | 78258 | Wit | 3× |
| Plate 1 x 5 | 78329 | Zwart | 6× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Lichtblauwgrijs | 2× |
| Tile 3 x 3 Curved, Macaroni | 79393 | Wit | 2× |
| Brick Special 1 x 2 x 1 1/3 with Rotation Joint Socket | 80431 | Donkerblauwgrijs | 4× |
| Plate Round 1 x 1 with Open Stud | 85861 | Zwart | 4× |
| Plate Round 1 x 1 with Open Stud | 85861 | Donkerrood | 5× |
| Plate Round 1 x 1 with Open Stud | 85861 | Lichtblauwgrijs | 1× |
| Plate Round 1 x 1 with Open Stud | 85861 | Wit | 1× |
| Plate Round 1 x 1 with Open Stud | 85861 | Lichtblauwgrijs | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zwart | 3× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zandkleur | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Donkerblauwgrijs | 5× |
| Weapon Gun / Torch (Space) [No Grooves] | 86208 | Donkerblauwgrijs | 1× |
| Weapon Gun / Torch (Space) [No Grooves] | 86208 | Roodbruin | 1× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Wit | 1× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Yellowish Green | 2× |
| Tile 2 x 4 with Groove | 87079 | Zwart | 1× |
| Tile 2 x 4 with Groove | 87079 | Lichtblauwgrijs | 2× |
| Tile 2 x 4 with Groove | 87079 | Lichtblauwgrijs | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Wit | 10× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Helder groen | 1× |
| Wedge 2 x 2 Facet | 87620 | Wit | 2× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Roodbruin | 1× |
| Plate 8 x 16 | 92438 | Lichtblauwgrijs | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Zwart | 1× |
| Brick and Axle Separator v2.0 | 96874 | Oranje | 1× |
| Tile Round 1 x 1 | 98138 | Wit | 2× |
| Tile Round 1 x 1 | 98138 | Trans-rood | 1× |
| Tile Round 1 x 1 | 98138 | Zandblauw | 8× |
| Tile Round 1 x 1 | 98138 | Trans-Brown | 3× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Parel goud | 6× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Zwart | 1× |
| Spoiler 2 x 4 with Handle [Plain] | 98834 | Wit | 1× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Zwart | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Zwart | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Lichtblauwgrijs | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Wit | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Lichtblauwgrijs | 10× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Zandkleur | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Wit | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Lichtblauwgrijs | 1× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Zwart | 6× |
Bouw-DNA
Onderdeleninzichten voor Horizon Forbidden West: Tallneck
Met 1.222 onderdelen zit deze build -42% ten opzichte van de gemiddelde Icons set en +111% ten opzichte van de gemiddelde release uit 2022.
T.o.v. gemiddelde Icons set
Gemiddelde Icons set: 2.105 onderdelen over 80 andere sets.
T.o.v. gemiddelde set uit 2022
Gemiddelde set uit 2022: 579 onderdelen over 467 andere sets.
Kleurprofiel
Dominante kleur
Zwart
Unieke onderdelen
6.2 onderdelen per uniek type
Herhalingsfactor
Gemiddeld aantal onderdelen per uniek type.
Meest gebruikte onderdeel
Plate 1 x 2
71xResultaten zijn gebaseerd op officiële LEGO onderdelen inventarissen. Nauwkeurigheid verbetert naarmate je set compleetheid bevestigt.
Deze site is niet gelieerd aan of goedgekeurd door de LEGO Groep.


![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061032.jpg)

![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6045936.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037746.jpg)



