


Embárcate en un viaje supersónico con el LEGO® Icons Concorde (10318) y construye una réplica detallada del avión de pasajeros comercial supersónico más famoso del mundo. Tómate un tiempo para una experiencia de construcción consciente mientras creas este impresionante modelo. Descubre detalles superauténticos, idénticos al jet anglo-francés real: una nariz inclinable, tren de aterrizaje funcional, una rueda de parachoques de cola retráctil, alas delta con alerones móviles y timones superior e inferior articulados. Explora la zona de asientos accesible y exhibe tu modelo en su soporte en modos de vuelo, despegue o aterrizaje. Encuentra relajación y sumérgete en la zona con este set de construcción coleccionable.
Inventario de piezas
| Pieza | Color | Cant. |
|---|---|---|
![]() Tile 6 x 6 with Bottom Tubes 10202 | Blanco | 2× |
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Amarillo | 1× |
![]() Windscreen Cylinder 4 x 4 x 2 with Trans-Black Windows pattern 103918pat0001 | Blanco | 1× |
![]() Technic Gear 8 Tooth [Reinforced] 10928 | Gris azulado oscuro | 1× |
![]() Bar Holder with Clip 11090 | Blanco | 1× |
![]() Tile Special 2 x 2 Inverted 11203 | Blanco | 1× |
![]() Tile Special 2 x 2 Inverted 11203 | Negro | 2× |
![]() Tile Special 2 x 2 Inverted 11203 | Gris azulado claro | 2× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Azul oscuro | 3× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Amarillo | 2× |
Mostrando 10 de 411 piezas
🔓 Regístrate para ver todas las piezas| Tile Special 2 x 2 Inverted | 11203 | Blanco | 1× |
| Tile Special 2 x 2 Inverted | 11203 | Negro | 2× |
| Tile Special 2 x 2 Inverted | 11203 | Gris azulado claro | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Azul oscuro | 3× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Amarillo | 2× |
| Plate 3 x 3 | 11212 | Blanco | 5× |
| Plate 3 x 3 | 11212 | Gris azulado oscuro | 5× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Negro | 1× |
| Technic Pin Connector Perpendicular 2 x 4 Bent - Beam with 90 Hole Ø 4.8 | 11455 | Negro | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Amarillo | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Blanco | 6× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Gris azulado claro | 3× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Blanco | 13× |
| Technic Beam 1 x 5 Thin with Axle Holes on Ends | 11478 | Blanco | 4× |
| Slope Curved 4 x 1 Inverted | 13547 | Blanco | 2× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Gris azulado claro | 2× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Blanco | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Gris azulado oscuro | 1× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Gris azulado claro | 1× |
| Panel 1 x 4 x 2 with Side Supports - Hollow Studs | 14718 | Blanco | 4× |
| Tile 2 x 2 Corner | 14719 | Blanco | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Negro | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Blanco | 66× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Blanco | 2× |
| Technic Axle 5 with Stop | 15462 | Marrón rojizo | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Blanco | 8× |
| Tile Round 1 x 2 Half Circle | 1748 | Blanco | 1× |
| Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts | 1750 | Negro | 2× |
| Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 18575 | Beige | 2× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Amarillo | 4× |
| Brick Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports | 18838 | Gris azulado claro | 2× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Rojo | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Beige | 4× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Amarillo | 1× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Blanco | 4× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Blanco | 2× |
| Brick 2 x 2 Corner | 2357 | Marrón rojizo | 2× |
| Brick 2 x 2 Corner | 2357 | Blanco | 14× |
| Technic Axle 11 | 23948 | Amarillo | 1× |
| Slope 45° 2 x 6 | 23949 | Gris azulado oscuro | 1× |
| Panel 1 x 3 x 1 | 23950 | Blanco | 2× |
| Plate 2 x 2 Corner | 2420 | Negro | 6× |
| Plate 2 x 2 Corner | 2420 | Blanco | 16× |
| Plate 2 x 2 Corner | 2420 | Rojo | 4× |
| Tile Round 1 x 1 Half Circle | 24246 | Azul oscuro | 3× |
| Tile Round 1 x 1 Half Circle | 24246 | Blanco | 4× |
| Wedge Plate 2 x 2 Left | 24299 | Gris azulado oscuro | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Gris azulado oscuro | 1× |
| Slope Curved 3 x 2 No Studs | 24309 | Gris azulado claro | 4× |
| Tile 1 x 4 with Groove | 2431 | Negro | 1× |
| Tile 1 x 4 with Groove | 2431 | Azul oscuro | 2× |
| Technic Axle 3 with Stop | 24316 | Marrón rojizo | 3× |
| Plate 2 x 12 | 2445 | Rojo | 1× |
| Plate 2 x 12 | 2445 | Gris azulado claro | 1× |
| Brick 1 x 16 | 2465 | Blanco | 12× |
| Brick 1 x 16 | 2465 | Negro | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Blanco | 10× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Blanco | 13× |
| Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 26599 | Negro | 6× |
| Tile 2 x 3 | 26603 | Gris azulado claro | 2× |
| Tile 2 x 3 | 26603 | Blanco | 4× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Blanco | 2× |
| Technic Worm Gear Short | 27938 | Gris azulado oscuro | 1× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Negro | 1× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Negro | 2× |
| Plate Special 2 x 2 with 2 Pin Holes | 2817 | Negro | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Blanco | 5× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Negro | 2× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Blanco | 6× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Blanco | 5× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Blanco | 5× |
| Slope 55° 1 x 6 x 5 with Bottom Stud Holders | 2937 | Blanco | 4× |
| Brick 2 x 4 | 3001 | Blanco | 5× |
| Brick 2 x 4 | 3001 | Negro | 3× |
| Brick 2 x 3 | 3002 | Gris azulado oscuro | 1× |
| Brick 2 x 3 | 3002 | Gris azulado claro | 1× |
| Brick 2 x 3 | 3002 | Marrón rojizo | 4× |
| Brick 2 x 2 | 3003 | Negro | 1× |
| Brick 1 x 2 | 3004 | Rojo | 2× |
| Brick 1 x 2 | 3004 | Blanco | 21× |
| Brick 1 x 2 | 3004 | Marrón rojizo | 4× |
| Brick 1 x 2 | 3004 | Gris azulado oscuro | 10× |
| Brick 1 x 2 | 3004 | Naranja | 4× |
| Brick 1 x 2 | 3004 | Azul oscuro | 1× |
| Brick 1 x 1 | 3005 | Blanco | 21× |
| Brick 1 x 1 | 3005 | Gris azulado claro | 4× |
| Brick 2 x 8 | 3007 | Marrón rojizo | 1× |
| Brick 1 x 8 | 3008 | Azul oscuro | 1× |
| Brick 1 x 8 | 3008 | Blanco | 13× |
| Brick 1 x 8 | 3008 | Beige | 2× |
| Brick 1 x 8 | 3008 | Marrón rojizo | 1× |
| Brick 1 x 8 with White 'Concorde' print | 3008pr0075 | Azul oscuro | 1× |
| Brick 1 x 6 | 3009 | Naranja | 2× |
| Brick 1 x 6 | 3009 | Negro | 8× |
| Brick 1 x 6 | 3009 | Blanco | 19× |
| Brick 1 x 6 | 3009 | Gris azulado oscuro | 1× |
| Brick 1 x 6 | 3009 | Azul oscuro | 1× |
| Brick 1 x 4 | 3010 | Azul oscuro | 1× |
| Brick 1 x 4 | 3010 | Blanco | 10× |
| Plate 2 x 4 | 3020 | Negro | 9× |
| Plate 2 x 4 | 3020 | Blanco | 7× |
| Plate 2 x 4 | 3020 | Gris azulado claro | 9× |
| Plate 2 x 4 | 3020 | Marrón rojizo | 4× |
| Plate 2 x 3 | 3021 | Rojo | 5× |
| Plate 2 x 3 | 3021 | Blanco | 8× |
| Plate 2 x 3 | 3021 | Negro | 5× |
| Plate 2 x 3 | 3021 | Amarillo | 1× |
| Plate 2 x 2 | 3022 | Gris azulado claro | 11× |
| Plate 2 x 2 | 3022 | Blanco | 7× |
| Plate 2 x 2 | 3022 | Rojo | 9× |
| Plate 1 x 2 | 3023 | Blanco | 58× |
| Plate 1 x 2 | 3023 | Rojo | 7× |
| Plate 1 x 2 | 3023 | Negro | 37× |
| Plate 1 x 2 | 3023 | Azul oscuro | 2× |
| Plate 1 x 2 | 3023 | Gris azulado claro | 3× |
| Plate 1 x 2 | 3023 | Negro | 25× |
| Plate 1 x 1 | 3024 | Blanco | 28× |
| Plate 1 x 1 | 3024 | Azul oscuro | 2× |
| Plate 1 x 1 | 3024 | Trans-amarillo | 2× |
| Plate 4 x 4 | 3031 | Gris azulado claro | 2× |
| Plate 4 x 4 | 3031 | Blanco | 2× |
| Plate 4 x 6 | 3032 | Gris azulado oscuro | 1× |
| Plate 4 x 6 | 3032 | Blanco | 1× |
| Plate 2 x 8 | 3034 | Gris azulado claro | 1× |
| Plate 2 x 8 | 3034 | Blanco | 2× |
| Plate 2 x 8 | 3034 | Rojo | 2× |
| Plate 4 x 8 | 3035 | Blanco | 1× |
| Plate 4 x 8 | 3035 | Marrón rojizo | 1× |
| Plate 6 x 8 | 3036 | Blanco | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Marrón rojizo | 3× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Blanco | 4× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Gris azulado claro | 4× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Negro | 9× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Blanco | 1× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Rojo | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Negro | 10× |
| Brick 1 x 4 without Bottom Tubes | 3066 | Trans-negro | 1× |
| Tile 2 x 2 with Groove | 3068b | Blanco | 4× |
| Tile 2 x 2 with Groove | 3068b | Gris azulado claro | 2× |
| Tile 1 x 2 with Groove | 3069b | Blanco | 24× |
| Tile 1 x 2 with Groove | 3069b | Rojo | 4× |
| Tile 1 x 2 with Groove | 3069b | Gris azulado oscuro | 1× |
| Tile 1 x 1 with Groove | 3070b | Blanco | 4× |
| Tile 1 x 1 with Groove | 3070b | Gris azulado claro | 10× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Rojo | 4× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Gris azulado claro | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Amarillo | 2× |
| Technic Pin 3/4 | 32002 | Beige | 1× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Blanco | 4× |
| Technic Axle and Pin Connector Angled #6 - 90° | 32014 | Blanco | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Negro | 8× |
| Plate Special 1 x 2 with Door Rail | 32028 | Naranja | 6× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Naranja | 1× |
| Technic Axle 2 Notched | 32062 | Rojo | 3× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Blanco | 2× |
| Technic Beam 1 x 7 Thin | 32065 | Blanco | 1× |
| Technic Axle 5 | 32073 | Amarillo | 1× |
| Technic Axle 5 | 32073 | Gris azulado claro | 4× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Blanco | 6× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Negro | 2× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Negro | 1× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Blanco | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Negro | 2× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Rojo | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Blanco | 8× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Negro | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Gris azulado claro | 9× |
| Technic Worm Gear Type 2 | 32905 | Gris azulado claro | 1× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Blanco | 3× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Gris azulado oscuro | 4× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Blanco | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Negro | 18× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Negro | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Gris azulado oscuro | 11× |
| Tile Special 2 x 4 Inverted | 3395 | Blanco | 6× |
| Tile Special 2 x 4 Inverted | 3395 | Negro | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Blanco | 2× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Negro | 8× |
| Wheel 8 x 6 with Slot | 34337 | Gris azulado claro | 2× |
| Plate 1 x 8 | 3460 | Rojo | 2× |
| Plate 1 x 8 | 3460 | Blanco | 7× |
| Plate 1 x 8 | 3460 | Amarillo | 2× |
| Plate 1 x 8 | 3460 | Naranja | 8× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Rojo | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Blanco | 10× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Azul oscuro | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Beige | 8× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Blanco | 2× |
| Cone 4 x 4 x 3 with Axle Hole | 3569 | Blanco | 2× |
| Brick 1 x 3 | 3622 | Blanco | 20× |
| Brick 1 x 3 | 3622 | Marrón rojizo | 2× |
| Brick 1 x 3 | 3622 | Azul oscuro | 3× |
| Brick 1 x 3 | 3622 | Negro | 4× |
| Plate 1 x 3 | 3623 | Beige | 8× |
| Plate 1 x 3 | 3623 | Blanco | 8× |
| Plate 1 x 3 | 3623 | Negro | 8× |
| Plate 1 x 3 | 3623 | Rojo | 4× |
| Technic Gear 24 Tooth [New Style with Single Axle Hole] | 3648b | Gris azulado oscuro | 1× |
| Brick Arch 1 x 4 | 3659 | Gris azulado claro | 6× |
| Plate 1 x 6 | 3666 | Blanco | 16× |
| Plate 1 x 6 | 3666 | Beige | 10× |
| Plate 1 x 6 | 3666 | Azul oscuro | 2× |
| Brick Special 2 x 6 x 1 1/3 with Axle Holes and 2 x 4 Recessed, Ridges at Underside | 3668 | Gris azulado oscuro | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Negro | 4× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Negro | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Rojo | 6× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Azul oscuro | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Negro | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Gris azulado claro | 10× |
| Technic Axle 4 | 3705 | Rojo | 5× |
| Technic Axle 6 | 3706 | Rojo | 2× |
| Technic Axle 8 | 3707 | Negro | 1× |
| Technic Axle 12 | 3708 | Negro | 1× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Blanco | 2× |
| Plate 1 x 4 | 3710 | Azul oscuro | 2× |
| Plate 1 x 4 | 3710 | Negro | 29× |
| Plate 1 x 4 | 3710 | Gris azulado claro | 3× |
| Plate 1 x 4 | 3710 | Blanco | 24× |
| Plate 1 x 4 | 3710 | Naranja | 4× |
| Technic Bush | 3713 | Rojo | 2× |
| Technic Bush | 3713 | Gris azulado claro | 2× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Beige | 2× |
| Plate 2 x 6 | 3795 | Negro | 2× |
| Plate 2 x 6 | 3795 | Rojo | 1× |
| Plate 2 x 6 | 3795 | Blanco | 14× |
| Plate 2 x 6 | 3795 | Beige | 2× |
| Plate 2 x 10 | 3832 | Negro | 2× |
| Cone 2 x 2 x 2, Open Stud | 3942c | Blanco | 2× |
| Plate 6 x 6 | 3958 | Blanco | 1× |
| Technic Pin Long without Friction Ridges, with Anti-Roll Notch | 39888 | Beige | 2× |
| Brick Special 1 x 1 with Headlight | 4070 | Negro | 4× |
| Brick Special 1 x 1 with Headlight | 4070 | Blanco | 2× |
| Tile 1 x 8 with Groove | 4162 | Blanco | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Gris azulado claro | 3× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Gris azulado oscuro | 3× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Rojo | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Blanco | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Blanco | 1× |
| Brick Curved 6 x 1 Inverted | 42023 | Blanco | 2× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Gris azulado claro | 1× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Negro | 7× |
| Wheel 11 x 8 with Center Groove | 42610 | Gris azulado claro | 8× |
| Technic Pin 1/2 | 4274 | Blanco | 6× |
| Plate 2 x 16 | 4282 | Gris azulado claro | 5× |
| Slope 33° 3 x 1 | 4286 | Azul oscuro | 1× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Negro | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Negro | 8× |
| Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Top | 43045 | Negro | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Negro | 3× |
| Technic Axle 7 | 44294 | Gris azulado claro | 2× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Azul oscuro | 1× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Blanco | 18× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Marrón rojizo | 4× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Negro | 3× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Rojo | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Blanco | 6× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Gris azulado claro | 6× |
| Plate 1 x 10 | 4477 | Blanco | 14× |
| Plate 1 x 10 | 4477 | Gris azulado claro | 8× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 44874 | Rojo | 1× |
| Technic Axle 3 | 4519 | Gris azulado claro | 3× |
| Technic Axle 3 | 4519 | Amarillo | 4× |
| Slope Curved 8 x 6 x 2 Double | 45411 | Blanco | 2× |
| Slope Curved 8 x 6 x 2 Double with 7 Light Bluish grey Airplane Windows print | 45411pr0004 | Blanco | 7× |
| Slope 1 x 6 x 1 with 1 x 2 x 1/3 Cutout | 4569 | Azul oscuro | 1× |
| Wedge Plate 12 x 3 Left | 47397 | Blanco | 2× |
| Wedge Plate 12 x 3 Left | 47397 | Naranja | 2× |
| Wedge Plate 12 x 3 Right | 47398 | Blanco | 2× |
| Wedge Plate 12 x 3 Right | 47398 | Naranja | 2× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Trans-naranja | 4× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Gris azulado oscuro | 1× |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket | 48169 | Gris azulado oscuro | 1× |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] | 48171 | Negro | 1× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Blanco | 2× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Rojo | 1× |
| Wheel Arch, Mudguard 2 x 3 x 1 1/3 with 2 x 2 Plate | 49097 | Blanco | 1× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Amarillo | 2× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Azul oscuro | 3× |
| Brick 1 x 4 x 3 | 49311 | Blanco | 6× |
| Wedge Curved 10 x 3 Left with Narrowing Red Stripe, Black 'Concorde' print | 50955pr0003 | Blanco | 1× |
| Wedge Curved 10 x 3 Right with Narrowing Red Stripe, Black 'Concorde' print | 50956pr0003 | Blanco | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Blanco | 18× |
| Technic Axle 8 with Stop | 55013 | Gris azulado oscuro | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Gris azulado claro | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Amarillo | 8× |
| Tyre 14 x 4 Smooth Small Single [New Style] | 59895 | Negro | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Blanco | 1× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Blanco | 1× |
| Slope 18° 4 x 1 | 60477 | Negro | 2× |
| Slope 18° 4 x 1 | 60477 | Blanco | 1× |
| Slope 18° 4 x 1 | 60477 | Azul oscuro | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Rojo | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Blanco | 11× |
| Plate 1 x 12 | 60479 | Rojo | 10× |
| Plate 1 x 12 | 60479 | Blanco | 6× |
| Slope 65° 2 x 1 x 2 | 60481 | Blanco | 12× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Negro | 4× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Blanco | 4× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Negro | 1× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Gris azulado oscuro | 4× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Blanco | 2× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Negro | 6× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Negro | 4× |
| Brick 1 x 10 | 6111 | Blanco | 12× |
| Brick 1 x 12 | 6112 | Gris azulado claro | 2× |
| Brick 1 x 12 | 6112 | Blanco | 10× |
| Brick 1 x 12 | 6112 | Beige | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Negro | 22× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Blanco | 3× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Gris azulado oscuro | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rojo | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Amarillo | 22× |
| Technic Pin with Dual Wheels Holder | 61483 | Gris azulado claro | 1× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Gris azulado oscuro | 1× |
| Technic Universal Joint 3L [Complete Assembly] | 61903 | Gris azulado claro | 1× |
| Panel 1 x 1 x 1 Corner | 6231 | Blanco | 2× |
| Cone 3 x 3 x 2 | 6233 | Blanco | 2× |
| Technic Pin Connector Round [Slotted] | 62462 | Rojo | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Naranja | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Gris azulado claro | 1× |
| Tile 1 x 3 | 63864 | Blanco | 5× |
| Tile 1 x 3 | 63864 | Amarillo | 4× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Gris azulado claro | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Amarillo | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Gris azulado claro | 4× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Blanco | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Negro | 2× |
| Wedge Plate 2 x 4 27° Right | 65426 | Blanco | 3× |
| Wedge Plate 2 x 4 27° Left | 65429 | Blanco | 3× |
| Technic Axle 3 with Stud | 6587 | Beige oscuro | 2× |
| Tile Special 2 x 3 with 2 Clips without Tab between Clips | 65886 | Blanco | 2× |
| Technic Gear 12 Tooth Bevel | 6589 | Beige | 2× |
| Technic Beam 1 x 3 Thin | 6632 | Negro | 3× |
| Technic Beam 1 x 3 Thin | 6632 | Naranja | 1× |
| Tile 1 x 6 with Groove | 6636 | Blanco | 8× |
| Tile 1 x 6 with Narrowing Red Stripe print | 6636pr0039 | Blanco | 2× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Blanco | 4× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Gris azulado claro | 2× |
| Tile 2 x 6 | 69729 | Blanco | 9× |
| Tile 2 x 6 | 69729 | Negro | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Gris azulado claro | 2× |
| Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 3 Support Walls on Bottom | 72132 | Blanco | 1× |
| Slope Inverted 45° 4 x 4 Double with 2 Holes | 72454 | Blanco | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Gris azulado claro | 2× |
| Brick Round 3 x 3 x 2 Recessed Center with 2 x 2 Studs and Axle Hole | 73111 | Negro | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Gris azulado oscuro | 12× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Blanco | 6× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Blanco | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Azul oscuro | 1× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Gris azulado claro | 6× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Negro | 6× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Negro | 2× |
| Plate 2 x 3 with 1 x 1 Cutout | 73831 | Gris azulado claro | 1× |
| Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder | 76766 | Gris azulado claro | 1× |
| Technic Pin Long 3l, No Friction Ridges, with Stop and Hole | 77765 | Gris azulado claro | 6× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Negro | 15× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Blanco | 23× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Beige | 2× |
| Bar 2L with Stop in Center | 78258 | Blanco | 5× |
| Plate 1 x 5 | 78329 | Blanco | 2× |
| Wedge Plate 6 x 2 Left | 78443 | Blanco | 2× |
| Wedge Plate 6 x 2 Right | 78444 | Blanco | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Rojo | 8× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Negro | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Blanco | 45× |
| Brick Curved 1 x 4 x 2/3 Double, No Studs | 79756 | Blanco | 9× |
| Windscreen 2 x 4 Half Dome with Light Bluish Grey Cockpit print | 81911pr0001 | Trans-negro | 1× |
| Tile Special 4 x 8 Inverted with Gold 'Concorde', Stats on Black Background print | 83496pr0001 | Marrón rojizo | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Blanco | 64× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Rojo | 4× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Blanco | 12× |
| Tile 2 x 4 with Groove | 87079 | Gris azulado oscuro | 9× |
| Tile 2 x 4 with Groove | 87079 | Marrón rojizo | 2× |
| Tile 2 x 4 with Red Stripe print | 87079pr0317 | Blanco | 2× |
| Technic Axle 4 with Stop | 87083 | Gris azulado oscuro | 5× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Gris azulado claro | 6× |
| Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | 87552 | Blanco | 4× |
| Bar 3L | 87994 | Oro perla | 4× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Blanco | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Blanco | 32× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs with Black/Red Air Intakes print | 88930pr0023 | Blanco | 1× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs with Black/Red Air Intakes print | 88930pr0024 | Blanco | 1× |
| Technic Pin 1/2 with Friction | 89678 | Rojo | 4× |
| Technic Pin 1/2 with Friction | 89678 | Gris azulado oscuro | 3× |
| Technic Panel Fairing 2 x 1 x 1 | 89679 | Nougat medio | 12× |
| Brick Special 2 x 2 with Grooves and Axle Hole | 90258 | Negro | 1× |
| Plate 2 x 14 | 91988 | Gris azulado claro | 1× |
| Tyre 17.5 x 6 with Shallow Staggered Treads and Middle Band | 92409 | Negro | 8× |
| Technic Axle and Pin Connector Perpendicular Split | 92907 | Gris azulado claro | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Blanco | 6× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Blanco | 6× |
| Slope Curved 3 x 4 x 2/3 Triple Curved with 2 Sunk Studs | 93604 | Blanco | 1× |
| Brick and Axle Separator v2.0 | 96874 | Naranja | 1× |
| Tile Round 1 x 1 | 98138 | Negro | 4× |
| Tile Round 1 x 1 | 98138 | Negro | 3× |
| Tile Round 1 x 1 | 98138 | Trans-amarillo | 1× |
| Slope 75° 2 x 2 x 3 [Solid Studs] | 98560 | Gris azulado oscuro | 3× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Blanco | 31× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Negro | 5× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris azulado claro | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Negro | 8× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Plata mate | 4× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Amarillo | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Blanco | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Negro | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Blanco | 9× |
ADN de construccion
Datos del inventario de piezas de Concorde
Con 2083 piezas, esta construccion esta -1% frente al set promedio de Icons y +264% frente al lanzamiento promedio de 2023.
Frente al set promedio de Icons
Set promedio de Icons: 2094 piezas en 80 otros sets.
Frente al set promedio de 2023
Set promedio de 2023: 573 piezas en 506 otros sets.
Perfil de color
Color dominante
Blanco
Piezas únicas
7.9 piezas por tipo único
Factor de repeticion
Promedio de piezas por tipo unico.
Pieza más usada
Plate 1 x 2
132xLos resultados se basan en inventarios oficiales LEGO. La precisión mejora a medida que confirmas la completitud de los sets.
Este sitio no está afiliado ni respaldado por el Grupo LEGO.

![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061025.jpg)

![Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg)





