


Viaje a la vibrante década de 1910 con el magnífico LEGO® Icons Ford Model T (11376-1). Esta auténtica réplica captura el espíritu pionero, presentando un techo de tela que se pliega y una cabina de conductor meticulosamente detallada con dirección funcional. Descubra funciones intrincadas como el parabrisas dividido abatible, una única puerta de pasajero que se abre y un maletero trasero funcional. Levante los paneles del capó para revelar el motor con un ventilador giratorio activado por una manivela, o mire debajo del asiento para acceder al tanque de gasolina. Acabado con carrocería negra clásica, elegantes detalles dorados y llantas de radios altas con neumáticos delgados de goma blanca, esta obra maestra automotriz vintage es una pieza de exhibición elegante y nostálgica para cualquier aficionado a los coches clásicos americanos.
Inventario de piezas
| Pieza | Color | Cant. |
|---|---|---|
![]() Radiator Grille 1x2 2412 | Negro | 6× |
![]() Plate 2 x 2 Corner 2420 | Negro | 4× |
![]() Tile 1 x 4 with Groove 2431 | Negro | 3× |
![]() Plate Special 2 x 2 with 2 Pin Holes 2817 | Negro | 5× |
![]() Brick Special 1 x 2 with Grille 2877 | Negro | 4× |
![]() Brick 1 x 2 3004 | Negro | 2× |
![]() Brick 1 x 1 3005 | Negro | 2× |
![]() Brick 1 x 4 3010 | Negro | 2× |
![]() Plate 2 x 4 3020 | Negro | 4× |
![]() Plate 2 x 3 3021 | Negro | 10× |
Mostrando 10 de 309 piezas
🔓 Regístrate para ver todas las piezas| Brick 1 x 2 | 3004 | Negro | 2× |
| Brick 1 x 1 | 3005 | Negro | 2× |
| Brick 1 x 4 | 3010 | Negro | 2× |
| Plate 2 x 4 | 3020 | Negro | 4× |
| Plate 2 x 3 | 3021 | Negro | 10× |
| Plate 2 x 2 | 3022 | Negro | 12× |
| Plate 1 x 2 | 3023 | Negro | 18× |
| Plate 1 x 1 | 3024 | Negro | 10× |
| Plate 6 x 10 | 3033 | Negro | 1× |
| Plate 2 x 8 | 3034 | Negro | 1× |
| Slope 45? 2 x 2 | 3039 | Negro | 1× |
| FLAT TILE 1X2 | 3069 | Negro | 10× |
| FLAT TILE 1X1 | 3070 | Negro | 10× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Negro | 4× |
| Plate 1 x 8 | 3460 | Negro | 1× |
| Plate 1 x 3 | 3623 | Negro | 5× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Negro | 1× |
| Plate 1 x 4 | 3710 | Negro | 16× |
| Plate 2 x 6 | 3795 | Negro | 2× |
| Plate 6 x 6 | 3958 | Negro | 4× |
| PLATE 2X2 ROUND | 4032 | Negro | 1× |
| Brick Special 1 x 1 Studs on 4 Sides | 4733 | Negro | 3× |
| BRICK Ø16 W. CROSS | 6143 | Negro | 1× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Negro | 2× |
| Tile 1 x 6 with Groove | 6636 | Negro | 10× |
| Wedge Plate 4 x 2 Right | 41769 | Negro | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Negro | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Negro | 6× |
| Plate Round Corner 3 x 3 | 30357 | Negro | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Negro | 4× |
| Plate 4 x 4 | 3031 | Negro | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Negro | 8× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Negro | 3× |
| Plate 1 x 12 | 60479 | Negro | 6× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Negro | 10× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Negro | 1× |
| Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 60581 | Negro | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Negro | 6× |
| Tile 2 x 4 with Groove | 87079 | Negro | 6× |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 85080 | Negro | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Negro | 9× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Negro | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Negro | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Negro | 10× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Negro | 3× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Negro | 3× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Negro | 1× |
| PLATE 3X4 WITH 4 KNOBS | 17836 | Negro | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Negro | 1× |
| SHAFT 3M Ø3.2 | 17715 | Negro | 6× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Negro | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Negro | 7× |
| Wedge Plate 2 x 2 Left | 24299 | Negro | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Negro | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Negro | 1× |
| Tile 2 x 3 | 26603 | Negro | 4× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Negro | 1× |
| STICK 6M W/FLANGE | 28921 | Negro | 2× |
| Plate 3 x 3 | 11212 | Negro | 2× |
| Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | 25214 | Negro | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Negro | 14× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Negro | 2× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Negro | 6× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Negro | 5× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Negro | 8× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Negro | 6× |
| BAD ROBOT ARM | 49753 | Negro | 4× |
| Wedge Sloped 45° 4 x 2 Left | 43721 | Negro | 1× |
| Wedge Sloped 45° 4 x 2 Right | 43720 | Negro | 1× |
| Equipment Candlestick | 37762 | Negro | 8× |
| PLATE 1X1 W/HOLDER VERTICAL | 52738 | Negro | 2× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Negro | 2× |
| HOLDER Ø3.2 W/TUBE Ø3.2 HOLE | 44873 | Negro | 4× |
| Tile 2 x 6 | 69729 | Negro | 2× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Negro | 2× |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 68568 | Negro | 4× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Negro | 2× |
| PLATE 1X1 W. HOLDER | 44860 | Negro | 2× |
| Weapon Hilt Symmetric | 66909 | Negro | 4× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Negro | 2× |
| Plate 1x1 with Up Right Holder | 44842 | Negro | 2× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Negro | 4× |
| Bar Holder with Clip and 90° Angle (Mechanical Leg) | 72869 | Negro | 2× |
| Plate 1 x 5 | 78329 | Negro | 4× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Negro | 2× |
| Tile Special 2 x 3 with 2 Clips without Tab between Clips | 65886 | Negro | 2× |
| Propeller 3 Blade 3 Diameter with Pin Hole | 65768 | Negro | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Negro | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Negro | 4× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Negro | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Negro | 2× |
| Plate 3 x 3 Corner | 77844 | Negro | 3× |
| BRICK 4X6, W/ 4.85 HOLE, CUT OUT | 1679 | Negro | 1× |
| Bracket 1 x 6 - 2 x 6 Inverted | 5090 | Negro | 1× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Negro | 4× |
| Sports Hockey Stick | 64000 | Negro | 1× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Negro | 1× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Negro | 2× |
| Slope Curved 2 x 2 with Stud Notch Left | 5095 | Negro | 1× |
| Slope Curved 2 x 2 with Stud Notch Right | 5093 | Negro | 1× |
| Tile Round 2 x 2 Half Circle | 5520 | Negro | 4× |
| Brick Curved 1 x 2 x 1 2/3 with 1 Cutout | 5907 | Negro | 8× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Negro | 5× |
| Cone 1 x 1 Inverted with Bar at Bottom (Ice Cream Cone) | 11610 | Negro | 2× |
| Brick Curved 1 x 1 | 7126 | Negro | 2× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Negro | 10× |
| Brick Arch 1 x 5 x 3 1/3 Curved Top | 5845 | Negro | 4× |
| Brick Round Corner, Curved 2 x 2 x 1 2/3 Quarter Dome with 1 Cutout | 5906 | Negro | 2× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Negro | 6× |
| Slope 45° 2 x 4 with 2/3 Inverted Cutout and no Studs | 5540 | Negro | 2× |
| Slope 1 x 4 with 1 x 2 Cutout | 5654 | Negro | 4× |
| Technic Axle 4 | 3705 | Negro | 1× |
| Technic Axle 6 | 3706 | Negro | 3× |
| Technic Axle 2 Notched | 32062 | Negro | 4× |
| Technic Beam 1 x 3 Thick | 32523 | Negro | 2× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Negro | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Negro | 4× |
| Technic Beam 1 x 13 Thick | 41239 | Negro | 2× |
| T-PIECE | 4697 | Negro | 2× |
| DOUBLE Ø4.85 HOLE W.Ø3.2 SHAFT | 29173 | Negro | 2× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Negro | 1× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Negro | 10× |
| CROSS HOLES W/ DOUBLE, DIA. 3.2 SHAFT | 49133 | Negro | 6× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Negro | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Negro | 2× |
| Wheel 11 x 8 with Center Groove | 42610 | Negro | 1× |
| Technic Beam 3 x 0.5 Liftarm with Boss and Blocked, Squared Pin Hole | 61408 | Negro | 1× |
| Technic Pin Connector 3L with 2 Pins and Center Hole [Pin Ridges Across Part] | 46189 | Negro | 1× |
| LEVER 5M | 44864 | Negro | 4× |
| BUSH FOR CROSS AXLE | 42798 | Negro | 8× |
| TECHNIC LEVER 2M | 44862 | Negro | 2× |
| TOGGEL JOINT | 3182 | Negro | 2× |
| Technic Link 1 x 8 | 5996 | Negro | 1× |
| Plate 1 x 4 | 3710 | Beige | 1× |
| Plate 1 x 2 | 3023 | Beige | 13× |
| Plate 2 x 4 | 3020 | Beige | 6× |
| Plate 2 x 3 | 3021 | Beige | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Beige | 3× |
| Brick 1 x 3 | 3622 | Beige | 4× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Beige | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Beige | 1× |
| Technic Gear 12 Tooth Bevel | 6589 | Beige | 1× |
| CONNECTOR PEG/CROSS AXLE | 6562 | Beige | 1× |
| Technic Axle 4 with Centre Stop | 99008 | Beige | 4× |
| Technic Pin 3/4 | 32002 | Beige | 5× |
| TECHNIC LEVER 2M | 44862 | Beige | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Negro | 4× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Negro | 6× |
| ELEMENT SEPARATOR | 31510 | Naranja | 1× |
| Technic Rubber Belt 24mm | 85544 | Rojo | 1× |
| Technic Axle 8 | 3707 | Rojo | 1× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rojo | 1× |
| Technic Pin 1/2 with Friction | 89678 | Rojo | 2× |
| Technic Axle 5 | 32073 | Amarillo | 4× |
| ENGINE 1X2 HALF BEAM, W/ CROSS AXLE | 8232 | Amarillo | 2× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Gris azulado claro | 1× |
| Technic Steering Wheel Small (3 Studs Diameter) | 2819 | Gris azulado claro | 1× |
| Plate 2 x 2 Corner | 2420 | Gris azulado oscuro | 4× |
| Plate 2 x 10 | 3832 | Gris azulado oscuro | 1× |
| Plate 1 x 1 | 3024 | Gris azulado oscuro | 6× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Gris azulado oscuro | 1× |
| Plate 2 x 8 | 3034 | Gris azulado oscuro | 2× |
| Plate 1 x 4 | 3710 | Gris azulado oscuro | 5× |
| Plate 2 x 6 | 3795 | Gris azulado oscuro | 1× |
| Plate 2 x 3 | 3021 | Gris azulado oscuro | 3× |
| FLAT TILE 1X2 | 3069 | Gris azulado oscuro | 2× |
| Plate 1 x 6 | 3666 | Gris azulado oscuro | 2× |
| Plate 1 x 2 | 3023 | Gris azulado oscuro | 2× |
| Plate 2 x 4 | 3020 | Gris azulado oscuro | 2× |
| Plate 2 x 2 | 3022 | Gris azulado oscuro | 2× |
| Brick 1 x 1 | 3005 | Gris azulado oscuro | 2× |
| Brick 1 x 6 | 3009 | Gris azulado oscuro | 1× |
| Plate 1 x 3 | 3623 | Gris azulado oscuro | 11× |
| Plate 4 x 4 | 3031 | Gris azulado oscuro | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Gris azulado oscuro | 4× |
| Plate Special 4 x 6 with Trap Door Hinge [Long Pins] | 92099 | Gris azulado oscuro | 1× |
| Plate 3 x 3 | 11212 | Gris azulado oscuro | 4× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Gris azulado oscuro | 1× |
| PLATE 2X2 W 1 KNOB | 23893 | Gris azulado oscuro | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Gris azulado oscuro | 4× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Gris azulado oscuro | 6× |
| PLATE 1X1 W. HOLDER | 44860 | Gris azulado oscuro | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris azulado oscuro | 1× |
| SPACE SKELETON ARM | 49754 | Gris azulado oscuro | 4× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Gris azulado oscuro | 2× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Gris azulado oscuro | 4× |
| HOLDER Ø3.2 W/TUBE Ø3.2 HOLE | 44873 | Gris azulado oscuro | 2× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Gris azulado oscuro | 1× |
| Bar 2L with Stop in Center | 78258 | Gris azulado oscuro | 7× |
| FLAT TILE 1X1, 1/2 CIRCLE | 35399 | Gris azulado oscuro | 32× |
| 3.2 SHAFT W/ 5.9 BALL | 67692 | Gris azulado oscuro | 2× |
| LIGHT SWORD - BLADE | 21462 | Gris azulado oscuro | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Gris azulado oscuro | 6× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Gris azulado oscuro | 4× |
| Plate Round 1 x 1 with Hollow Stud and Bar on Underside - Long Space | 79194 | Gris azulado oscuro | 4× |
| Weapon Gun / Pistol Two Barrel, 8 Ribs | 6018 | Gris azulado oscuro | 1× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Gris azulado oscuro | 1× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Gris azulado oscuro | 2× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Gris azulado oscuro | 1× |
| Technic Axle 4 with Stop | 87083 | Gris azulado oscuro | 1× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Gris azulado oscuro | 2× |
| Technic Pin 1/2 with Friction | 89678 | Gris azulado oscuro | 5× |
| Technic Beam 1 x 11 Thick with Alternating Holes | 73507 | Gris azulado oscuro | 2× |
| Plate 1 x 3 | 3623 | Negro | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Plata metálica | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Gris azulado claro | 2× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Gris azulado claro | 4× |
| Tile Special 1 x 2 with Handle | 2432 | Gris azulado claro | 1× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Gris azulado claro | 4× |
| Plate 2 x 4 | 3020 | Gris azulado claro | 2× |
| Plate 1 x 2 | 3023 | Gris azulado claro | 2× |
| Plate 1 x 1 | 3024 | Gris azulado claro | 2× |
| Plate 1 x 6 | 3666 | Gris azulado claro | 3× |
| PLATE 2X2 ROUND | 4032 | Gris azulado claro | 13× |
| Brick Special 1 x 1 with Headlight | 4070 | Gris azulado claro | 8× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gris azulado claro | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Gris azulado claro | 4× |
| Technic Brick 4 x 4 with 2 x 2 Opening | 32324 | Gris azulado claro | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Gris azulado claro | 4× |
| Brick Round 2 x 2 [Grill] | 92947 | Gris azulado claro | 1× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Gris azulado claro | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Gris azulado claro | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Gris azulado claro | 2× |
| STICK 6M W/FLANGE | 28921 | Gris azulado claro | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Gris azulado claro | 1× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Gris azulado claro | 2× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Gris azulado claro | 2× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Gris azulado claro | 4× |
| PLATE 1X1 W. HOLDER | 44860 | Gris azulado claro | 2× |
| Exhaust Pipe with Technic Pin - Flat End, Squared Hole | 65571 | Gris azulado claro | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Gris azulado claro | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Gris azulado claro | 2× |
| BRICK 2X2 ROUND W/ HOLE Ø4,85 | 79566 | Gris azulado claro | 1× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Gris azulado claro | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Gris azulado claro | 1× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Gris azulado claro | 1× |
| Technic Pin 1/2 | 4274 | Gris azulado claro | 1× |
| Technic Axle 3 | 4519 | Gris azulado claro | 2× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Gris azulado claro | 2× |
| 1/2 BUSH | 42136 | Gris azulado claro | 23× |
| Technic Gear 20 Tooth Bevel | 32198 | Gris azulado claro | 4× |
| TECHNIC LEVER 3M | 65123 | Gris azulado claro | 1× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Gris azulado claro | 1× |
| Technic Pin Connector Hub Perpendicular 3L with 2 Pins | 2393 | Gris azulado claro | 2× |
| BALL W. CROSS AXLE | 3985 | Gris azulado claro | 3× |
| Plate 1 x 2 | 3023 | Negro | 4× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Negro | 2× |
| ROUND BRICK 1X1 | 3062 | Marrón rojizo | 2× |
| Brick 2 x 2 Corner | 2357 | Negro | 1× |
| Brick 2 x 4 | 3001 | Negro | 1× |
| Slope 45? 2 x 2 | 3039 | Negro | 1× |
| Brick 2 x 2 | 3003 | Negro | 2× |
| Plate 2 x 8 | 3034 | Negro | 1× |
| Plate 2 x 2 Corner | 2420 | Negro | 2× |
| Brick 2 x 3 | 3002 | Negro | 2× |
| Plate 1 x 8 | 3460 | Negro | 1× |
| Plate 6 x 6 | 3958 | Negro | 1× |
| Plate 1 x 1 | 3024 | Negro | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Negro | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Negro | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Negro | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Marrón rojizo | 6× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Negro | 4× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Negro | 4× |
| Tile 2 x 3 | 26603 | Negro | 1× |
| FLAT TILE 1X1, 1/2 CIRCLE | 35399 | Marrón rojizo | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Negro | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Negro | 6× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Negro | 8× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Marrón rojizo | 6× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Negro | 2× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Negro | 1× |
| Technic Axle 3 with Stop | 24316 | Marrón rojizo | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Beige oscuro | 6× |
| FLAT TILE 1X1, ROUND | 35381 | Beige oscuro | 1× |
| Equipment Cutlery - Fork | 79741 | Plata mate | 2× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Pearl Titanium | 1× |
| KITCHEN EQUIPMENT, NO. 9 | 3576 | Trans-transparente | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 29387 | Trans-transparente | 2× |
| FLAT TILE 1X1 | 35403 | Trans-transparente | 6× |
| FLAT TILE 1X1, ROUND | 35380 | Trans-azul claro | 3× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Amarillo | 6× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Amarillo | 1× |
| FLAT TILE 1X2 | 3069 | Medium Lime | 2× |
| Equipment Hose Nozzle / Gun with Side String Hole Simplified | 60849 | Amarillo | 2× |
| FEZ | 29175 | Medium Lime | 1× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Medium Lime | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Medium Lime | 1× |
| Plate 1 x 2 | 3023 | Amarillo | 3× |
| Plate 1x1 with Up Right Holder | 44842 | Medium Lime | 3× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Amarillo | 2× |
| Brick Round 2 x 2 Dome Bottom [Open Stud] | 15395 | Naranja claro brillante | 2× |
| Equipment Sextant | 30154 | Oro perla | 1× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Amarillo | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Amarillo | 2× |
| FLAT TILE 1X1, ROUND, NO. 326 | 110030 | Medium Lime | 1× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Amarillo | 1× |
| Plate 1 x 8 | 3460 | Blanco | 2× |
| Plate 1 x 4 | 3710 | Blanco | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Blanco | 6× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Blanco | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Blanco | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Blanco | 1× |
| Technic Axle Pin 3L without Friction Ridges and 2L Axle | 65249 | Blanco | 2× |
ADN de construccion
Datos del inventario de piezas de Ford Model T
Con 1060 piezas, esta construccion esta -50% frente al set promedio de Icons y +69% frente al lanzamiento promedio de 2026.
Frente al set promedio de Icons
Set promedio de Icons: 2107 piezas en 80 otros sets.
Frente al set promedio de 2026
Set promedio de 2026: 627 piezas en 427 otros sets.
Perfil de color
Color dominante
Negro
Piezas únicas
4.4 piezas por tipo único
Factor de repeticion
Promedio de piezas por tipo unico.
Pieza más usada
Plate 1 x 2
42xLos resultados se basan en inventarios oficiales LEGO. La precisión mejora a medida que confirmas la completitud de los sets.
Este sitio no está afiliado ni respaldado por el Grupo LEGO.









