


Recrea batallas épicas de la temporada 3 de NINJAGO® Dragons Rising con el Jet Mech de Lloyd (71845). Este set de 1.112 piezas presenta un potente mech con piernas y brazos articulados, una cabina y 2 grandes accesorios de espada. Transforma el mech en un elegante jet con cabina, alas y motores para combates aéreos. Únete a Lloyd y Sora, armados con armas ninja, mientras se enfrentan a los villanos Kur, Tyr y un Guerrero Dragoniano Espectral. Los villanos llevan una bandera con un mensaje secreto, revelable con la hoja translúcida de Lloyd. Sora tiene una moto voladora, mientras que los enemigos comandan un dragón espectro articulado, combinable con partes del Dragón Truenofang del Caos (71832).
Inventario de piezas
| Pieza | Color | Cant. |
|---|---|---|
![]() Sticker Sheet for Set 71845-1 10113526 | Unknown | 1× |
![]() Technic Pin Connector Hub with 2 Perpendicular Axles 10197 | Negro | 3× |
![]() Technic Pin Connector Hub with 2 Perpendicular Axles 10197 | Blanco | 2× |
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Gris azulado oscuro | 4× |
![]() Bar Holder with Clip 11090 | Blanco | 8× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Azul oscuro | 2× |
![]() Tile Special 2 x 2 Inverted 11203 | Negro | 6× |
![]() Tile Special 2 x 2 Inverted 11203 | Amarillo claro brillante | 8× |
![]() Tile Special 2 x 2 Inverted 11203 | Gris azulado claro | 4× |
![]() Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle 11214 | Gris azulado oscuro | 2× |
Mostrando 10 de 360 piezas
🔓 Regístrate para ver todas las piezas| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Azul oscuro | 2× |
| Tile Special 2 x 2 Inverted | 11203 | Negro | 6× |
| Tile Special 2 x 2 Inverted | 11203 | Amarillo claro brillante | 8× |
| Tile Special 2 x 2 Inverted | 11203 | Gris azulado claro | 4× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Gris azulado oscuro | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Negro | 1× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Gris azulado claro | 1× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Rojo | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Light Aqua | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Coral | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Negro | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Gris azulado oscuro | 3× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Gris azulado claro | 3× |
| Plate Special 1 x 2 with 5.9mm Towball Socket and Towball | 14419 | Gris azulado oscuro | 1× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Gris azulado claro | 6× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Oro perla | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Azul oscuro | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Verde oscuro | 7× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Gris azulado claro | 6× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Light Aqua | 1× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Blanco | 6× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Oro perla | 3× |
| Tile Special 1 x 2 with Two Vertical Teeth / Tooth | 15209 | Blanco | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Blanco | 1× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Azul oscuro | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Gris azulado claro | 8× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Amarillo claro brillante | 10× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Negro | 1× |
| Plate Round 1 x 2 Half Circle with Stud (Jumper) | 1745 | Blanco | 1× |
| Tile Round 1 x 2 Half Circle | 1748 | Gris azulado oscuro | 1× |
| Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts | 1750 | Gris azulado oscuro | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Negro | 6× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Gris azulado claro | 1× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Gris azulado oscuro | 4× |
| Technic Panel 5 x 11 x 1 Tapered | 18945 | Verde brillante | 2× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Negro | 2× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Plata mate | 1× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Oro perla | 2× |
| Tile Special 2 x 3 Pentagonal | 22385 | Azul oscuro | 4× |
| Tile Special 2 x 3 Pentagonal | 22385 | Gris azulado claro | 2× |
| Tile Special 2 x 3 Pentagonal | 22385 | Gris azulado claro | 3× |
| Tile Special 2 x 3 Pentagonal | 22385 | Verde oscuro | 8× |
| Tile Special 2 x 3 Pentagonal | 22385 | Oro perla | 4× |
| Plate Special 1 x 2 with End Towball | 22890 | Gris azulado oscuro | 2× |
| Technic Pin Connector Hub Perpendicular 3L with 2 Pins | 2393 | Negro | 2× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Negro | 6× |
| Plate 2 x 2 Corner | 2420 | Negro | 4× |
| Plate 2 x 2 Corner | 2420 | Gris azulado claro | 2× |
| Plate 2 x 2 Corner | 2420 | Gris azulado oscuro | 4× |
| Slope Curved 2 x 1 Inverted | 24201 | Light Aqua | 2× |
| Tile Round 1 x 1 Half Circle | 24246 | Azul oscuro | 1× |
| Wedge Plate 2 x 2 Left | 24299 | Gris azulado claro | 1× |
| Wedge Plate 2 x 2 Left | 24299 | Blanco | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Gris azulado claro | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Blanco | 1× |
| Slope Curved 3 x 2 No Studs | 24309 | Light Aqua | 1× |
| Technic Axle 3 with Stop | 24316 | Marrón rojizo | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Verde oscuro | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Negro | 4× |
| Tile Round 1 x 1 Quarter | 25269 | Amarillo claro brillante | 6× |
| Tile Round 1 x 1 Quarter | 25269 | Light Aqua | 9× |
| Tile Round 1 x 1 Quarter | 25269 | Gris azulado claro | 12× |
| Tile Round 1 x 1 Quarter | 25269 | Verde oscuro | 2× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Blanco | 4× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Oro perla | 2× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Negro | 4× |
| Plate 4 x 4 Corner | 2639 | Gris azulado oscuro | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Gris azulado claro | 2× |
| Tile 2 x 3 | 26603 | Rojo | 1× |
| Tile 2 x 3 | 26603 | Gris azulado oscuro | 1× |
| Tile 2 x 3 | 26603 | Gris azulado claro | 2× |
| Windscreen 6 x 4 x 1 Hexagonal with Handle | 27262 | Verde oscuro | 1× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Gris azulado claro | 4× |
| Technic Axle Towball | 2736 | Gris azulado claro | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Azul oscuro | 2× |
| Wheel Arch, Mudguard 3 x 4 with 2 x 2 Plate | 28326 | Amarillo claro brillante | 2× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Negro | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Gris azulado claro | 7× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Negro | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Gris azulado claro | 7× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Negro | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Gris azulado oscuro | 6× |
| Plate 2 x 4 | 3020 | Verde oscuro | 4× |
| Plate 2 x 4 | 3020 | Light Aqua | 3× |
| Plate 2 x 4 | 3020 | Azul oscuro | 2× |
| Plate 2 x 4 | 3020 | Gris azulado claro | 4× |
| Plate 2 x 3 | 3021 | Blanco | 2× |
| Plate 2 x 3 | 3021 | Gris azulado claro | 10× |
| Plate 2 x 3 | 3021 | Beige | 2× |
| Plate 2 x 3 | 3021 | Gris azulado claro | 1× |
| Plate 2 x 3 | 3021 | Azul oscuro | 2× |
| Plate 2 x 3 | 3021 | Verde oscuro | 10× |
| Plate 2 x 3 | 3021 | Negro | 8× |
| Plate 2 x 3 | 3021 | Rojo | 1× |
| Plate 2 x 2 | 3022 | Negro | 2× |
| Plate 2 x 2 | 3022 | Blanco | 1× |
| Plate 2 x 2 | 3022 | Gris azulado oscuro | 1× |
| Plate 2 x 2 | 3022 | Azul oscuro | 2× |
| Plate 2 x 2 | 3022 | Rojo | 2× |
| Plate 2 x 2 | 3022 | Gris azulado claro | 11× |
| Plate 1 x 2 | 3023 | Trans-rosa oscuro | 3× |
| Plate 1 x 2 | 3023 | Trans-azul claro | 3× |
| Plate 1 x 2 | 3023 | Amarillo claro brillante | 10× |
| Plate 1 x 2 | 3023 | Azul oscuro | 5× |
| Plate 1 x 2 | 3023 | Gris azulado claro | 10× |
| Plate 1 x 1 | 3024 | Gris azulado claro | 9× |
| Plate 1 x 1 | 3024 | Negro | 2× |
| Plate 1 x 1 | 3024 | Trans-azul claro | 1× |
| Plate 4 x 4 | 3031 | Blanco | 1× |
| Plate 2 x 8 | 3034 | Gris azulado claro | 1× |
| Plate Round Corner 3 x 3 | 30357 | Negro | 4× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Blanco | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Negro | 1× |
| Slope 45? 2 x 2 | 3039 | Gris azulado oscuro | 4× |
| Brick Round 1 x 1 Open Stud | 3062b | Opal Trans-Clear | 1× |
| Tile 1 x 2 with Groove | 3069b | Gris azulado claro | 7× |
| Tile 1 x 2 with Groove | 3069b | Trans-azul claro | 2× |
| Tile 1 x 1 with Groove | 3070b | Amarillo claro brillante | 2× |
| Animal / Creature Body Part, Claw with Clip | 3171 | Oro perla | 6× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Gris azulado claro | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Blanco | 1× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Blanco | 2× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Negro | 2× |
| Technic Beam 3 x 3 L-Shape Thin | 32056 | Gris azulado oscuro | 4× |
| Technic Axle 2 Notched | 32062 | Rojo | 6× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Gris azulado oscuro | 1× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Beige | 4× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Gris azulado claro | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Gris azulado claro | 2× |
| Technic Axle 5 | 32073 | Amarillo | 2× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Gris azulado oscuro | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Gris azulado oscuro | 6× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Gris azulado claro | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Oro perla | 2× |
| Slope 33° 3 x 2 | 3298 | Gris azulado claro | 2× |
| Slope 33° 3 x 2 | 3298 | Rojo | 1× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Gris azulado claro | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Gris azulado claro | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Oro perla | 2× |
| Plate Special 4 x 4 with 3 x 3 Quarter Round Cutout | 35044 | Blanco | 4× |
| Technic Driving Ring Extension, 8 Ridges | 35186 | Gris azulado claro | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Blanco | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Gris azulado claro | 5× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Negro | 14× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Amarillo claro brillante | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Gris azulado claro | 6× |
| Plate 1 x 3 | 3623 | Gris azulado claro | 1× |
| Plate 1 x 3 | 3623 | Negro | 2× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Gris azulado claro | 1× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Gris azulado claro | 4× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Negro | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Gris azulado oscuro | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Gris azulado claro | 2× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Gris azulado claro | 2× |
| Technic Axle 4 | 3705 | Negro | 2× |
| Plate 1 x 4 | 3710 | Negro | 2× |
| Plate 1 x 4 | 3710 | Gris azulado claro | 2× |
| Plate 1 x 4 | 3710 | Verde oscuro | 1× |
| Plate 1 x 4 | 3710 | Azul oscuro | 2× |
| Plate 1 x 4 | 3710 | Amarillo claro brillante | 2× |
| Technic Bush | 3713 | Gris azulado claro | 2× |
| Creature Body Part, Dragon Head Upper Jaw, Hollow Eyes, Spikes | 3770 | Blanco | 1× |
| Equipment Lantern | 37776 | Pearl Titanium | 1× |
| Plate 2 x 6 | 3795 | Negro | 5× |
| Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 3839b | Oro perla | 1× |
| Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 3839b | Gris azulado claro | 1× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Gris azulado oscuro | 4× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Beige | 1× |
| Bracket 2 x 2 - 2 x 2 | 3956 | Negro | 2× |
| Technic Pin Long without Friction Ridges, with Anti-Roll Notch | 39888 | Beige | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Gris azulado claro | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Beige | 8× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Rojo | 3× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Gris azulado oscuro | 3× |
| Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | 40379 | Blanco | 1× |
| Technic Beam 1 x 2 Thin | 41677 | Blanco | 4× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Negro | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Negro | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Beige oscuro | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Rojo | 2× |
| Wedge Plate 4 x 2 Right | 41769 | Verde oscuro | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Verde oscuro | 2× |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 42003 | Negro | 4× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Negro | 1× |
| Wheel 11 x 8 with Center Groove | 42610 | Gris azulado claro | 2× |
| Technic Pin 1/2 | 4274 | Gris azulado claro | 16× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Negro | 8× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Gris azulado claro | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Gris azulado claro | 4× |
| Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Top | 43045 | Gris azulado claro | 4× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Negro | 1× |
| Wedge Curved Inverted 6 x 4 | 43713 | Negro | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Gris azulado claro | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Gris azulado claro | 2× |
| Technic Rotation Joint Disk with Pin and 3L Beam Thick | 44225 | Gris azulado claro | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | 44301b | Negro | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Gris azulado claro | 3× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Gris azulado claro | 8× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Gris azulado oscuro | 6× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Gris azulado claro | 2× |
| Technic Axle 3 | 4519 | Gris azulado claro | 2× |
| Technic Pin Connector 3L with 2 Pins and Center Hole [Pin Ridges Across Part] | 46189 | Negro | 2× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Negro | 8× |
| Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 47458 | Oro perla | 2× |
| Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 48267 | Oro perla | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Gris azulado claro | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Oro perla | 4× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Rojo | 1× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Gris azulado claro | 2× |
| Slope Inverted 45° 4 x 2 Double | 4871 | Blanco | 1× |
| Tile Special 2 x 2 with Top Pin [Squared Holes] | 49153 | Negro | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Light Aqua | 2× |
| Engine / Air Scoop 2 x 2 | 50943 | Plata mate | 1× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Negro | 1× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | 53451 | Blanco | 18× |
| Weapon Axe Head, Clip-on (Viking) [Thick Clip] | 53454 | Plata mate | 1× |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 53540 | Gris azulado oscuro | 1× |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 53540 | Gris azulado claro | 2× |
| Technic Ball Joint with Through Axle Hole | 53585 | Negro | 10× |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots] | 53923 | Negro | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Gris azulado claro | 6× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Negro | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Amarillo claro brillante | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Light Aqua | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Rojo | 4× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Rojo | 1× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Gris azulado claro | 2× |
| Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | 57909b | Negro | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Blanco | 4× |
| Cone 1 x 1 [Top Groove] | 59900 | Gris azulado oscuro | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Trans-rosa oscuro | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Blanco | 7× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Gris azulado claro | 4× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Negro | 1× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Blanco | 5× |
| Equipment Hose Nozzle / Gun with Side String Hole Simplified | 60849 | Oro perla | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Negro | 28× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Negro | 6× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Amarillo | 5× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Gris azulado oscuro | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-azul claro | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Oro perla | 6× |
| Tile 1 x 3 | 63864 | Gris azulado claro | 4× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Marrón rojizo | 2× |
| Bar 6L with Stop Ring | 63965 | Negro | 1× |
| Wedge Curved 4 x 3 No Studs [Plain] | 64225 | Gris azulado claro | 2× |
| Technic Panel Fairing #13 Large Short Smooth, Side A | 64394 | Verde oscuro | 2× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Oro perla | 4× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Negro | 4× |
| Technic Panel Fairing #14 Large Short Smooth, Side B | 64680 | Verde oscuro | 2× |
| Large Figure Weapon Sword, Blade with Bar, Single Edge | 65184 | Amarillo claro brillante | 2× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Oro perla | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Beige | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Rojo | 1× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Negro | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Gris azulado oscuro | 1× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Blanco | 2× |
| Technic Axle 3 with Stud | 6587 | Beige oscuro | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Negro | 2× |
| Weapon Hilt Symmetric | 66909 | Gris azulado oscuro | 1× |
| Weapon Hilt Symmetric | 66909 | Verde arena | 1× |
| Slope Curved 4 x 3 with 3 Layers, 1 x 3 Cutout on Underside | 66955 | Verde oscuro | 5× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Negro | 10× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Negro | 2× |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 68568 | Negro | 4× |
| Plant / Animal Body Part, Tree / Branch / Tail / Appendage / Tentacle with Pin | 69858 | Light Aqua | 8× |
| Weapon Sword, Broad with Trans-Red Blade pattern | 7182pat0001 | Oro perla | 1× |
| Slope Inverted 45° 4 x 4 Double with 2 Holes | 72454 | Negro | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Gris azulado claro | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Negro | 9× |
| Technic Beam 1 x 11 Thick with Alternating Holes | 73507 | Negro | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Gris azulado claro | 2× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Negro | 1× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Gris azulado claro | 2× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Negro | 1× |
| Plate Special 1 x 1 with Handle on 2 Ends | 78257 | Negro | 1× |
| Bracket 5 x 2 x 1 1/3 with Bottom Stud Holder | 79180 | Negro | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Negro | 4× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Negro | 2× |
| Technic Rotation Joint Disk with Pin and Double Rotation Joint Ball Half | 79505 | Negro | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Azul oscuro | 2× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Verde oscuro | 2× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Oro perla | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Blanco | 1× |
| Flag 2 x 2 Trapezoid with Flared Area between Clips | 80324 | Blanco | 2× |
| Rotation Joint Socket with 2 Pins | 80563 | Gris azulado oscuro | 5× |
| Plate Round 1 x 1 with Open Stud | 85861 | Trans-azul claro | 2× |
| Technic Brick 1 x 2 with Hole and Dual Beam Extensions | 85943 | Gris azulado oscuro | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Light Aqua | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Rojo | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Gris azulado claro | 7× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Amarillo claro brillante | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Gris azulado claro | 4× |
| Tile 2 x 4 with Groove | 87079 | Azul oscuro | 2× |
| Technic Axle 4 with Stop | 87083 | Gris azulado oscuro | 4× |
| Bar 3L | 87994 | Negro | 3× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Marrón rojizo | 1× |
| Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 90194 | Amarillo claro brillante | 1× |
| Windscreen 7 x 4 x 2 Round with Handle | 92279 | Trans-transparente | 1× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Pearl Titanium | 1× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Marrón rojizo | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Azul oscuro | 4× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Gris azulado claro | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Blanco | 1× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Negro | 4× |
| Brick and Axle Separator v2.0 | 96874 | Naranja | 1× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Gris azulado claro | 4× |
| Tile Round 1 x 1 | 98138 | Gris azulado claro | 2× |
| Tile Round 1 x 1 | 98138 | Trans-azul claro | 2× |
| Tile Round 1 x 1 | 98138 | Trans-transparente | 2× |
| Tile Round 1 x 1 | 98138 | Negro | 2× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Blanco | 6× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Pearl Titanium | 2× |
| Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes | 98585 | Gris azulado claro | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris azulado claro | 8× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Rojo | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris azulado claro | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Negro | 3× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Oro perla | 9× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Verde oscuro | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Plata mate | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Negro | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Negro | 18× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Azul oscuro | 3× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Gris azulado claro | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Light Aqua | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Gris azulado claro | 3× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Amarillo claro brillante | 4× |
| Torso, Tan Bandages, Olive Green Scaled Chest print, Tan Arms, Olive Green Hands | 973c26h20pr0002 | Naranja oscuro | 1× |
| Hat, Round, Wide, Flat | 5987 | Marrón rojizo | 1× |
| Hips and Reddish Brown Legs with Reddish Brown Belt, Dark Orange Robe Ends, Olive Green Skin Through Tears print | 970c19pr0006 | Marrón rojizo | 1× |
| Minifig Neckwear Armour Shoulder Pads Spiky | 88295 | Marrón rojizo | 1× |
| Minifig Head Kur, Bandages, Olive Green Face, Yellow Eyes, Crooked White Teeth, Grin, Light Bluish Grey Ponytail | 28621pr9668 | Beige | 1× |
| Hair Swept Back, Tan with Headband Pattern | 69562pat0001 | Verde brillante | 1× |
| Hips and Bright Green Legs with Dark Red Sash, Knee Caps, Robe Ends, Dark Green Trim print | 970c06pr0007 | Verde brillante | 1× |
| Minifig Neckwear Shoulder Armour With Pearl Gold Dragon pattern | 7104pat0001 | Verde brillante | 1× |
| Torso, Ninja Robes, Dark Green Trim, Dark Red Plated Armor, Dark Tan Strap, Gold Dragon print, Bright Green Arms, Black Hands | 973c06h03pr0003 | Verde brillante | 1× |
| Minifig Head Lloyd, Reddish Brown Eyebrows, Green Eyes, Lopsided Open Mouth Grin / Gritted Teeth Print | 3626cpr2255 | Amarillo | 1× |
| Hair, High Ponytail with Dark Blue Headphones, Cat Ears pattern | 5326pat0001 | Coral | 1× |
| Minifig Neckwear Shoulder Armour With Pearl Gold Dragon pattern | 7104pat0001 | Azul oscuro | 1× |
| Hips and White Legs with Coral Sash, Robe Ends, Gold/Sand Blue Knee Pads print | 970c27pr0032 | Blanco | 1× |
| Torso, Ninja Robes, Dark Blue/Coral Trim, Dark Blue Belt, Gold Cat print, White Arms, Dark Blue Hands | 973c27h05pr0003 | Blanco | 1× |
| Minifig Head Sora, Coral Eyeshadow and Lips, Gold Markings, Golden Eyes / Angry Grin print | 28621pr3985 | Amarillo | 1× |
| Minifig Neckwear Armour with Dragon Jaw | 5985 | Azul oscuro | 1× |
| Minifig Head Spectral Dragonian Warrior, Medium Azure Face, Dark Blue Lines, Red Eyes, White Fangs, Red Mouth, Medium Azure/Red Shapes in Back | 28621pr9670 | Light Aqua | 1× |
| Torso, Red Belt, Silver Dragon Skull, Horns print, Trans-Light Blue Arms, Red Hands | 973c65h22pr0001 | Light Aqua | 1× |
| Creature Body Part, Dragon, Head | 5975 | Pearl Titanium | 1× |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | 13564 | Rojo | 2× |
| Lower Body, Ghost with Marbled Light Aqua pattern | 19859pat0016 | Trans-azul claro | 1× |
| Creature Body Part, Dragon, Tail | 5978 | Azul oscuro | 1× |
| Creature Body Part, Dragon, Wing | 5984 | Azul oscuro | 2× |
| Hips and Trans-Light Blue Legs with Silver Armor, Red Tattered Skirt print | 970c65pr0001 | Plata mate | 1× |
| Minifig Neckwear Armour with Dragon Jaw | 5985 | Pearl Titanium | 1× |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | 13564 | Blanco | 2× |
| Creature Body Part, Dragon, Head | 5975 | Blanco | 1× |
ADN de construccion
Datos del inventario de piezas de Lloyd’s Jet Mech
Con 1112 piezas, esta construccion esta +143% frente al set promedio de Ninjago y +75% frente al lanzamiento promedio de 2025.
Frente al set promedio de Ninjago
Set promedio de Ninjago: 458 piezas en 408 otros sets.
Frente al set promedio de 2025
Set promedio de 2025: 636 piezas en 561 otros sets.
Perfil de color
Color dominante
Gris azulado claro
Piezas únicas
4.7 piezas por tipo único
Factor de repeticion
Promedio de piezas por tipo unico.
Pieza más usada
Plate 2 x 3
36xLos resultados se basan en inventarios oficiales LEGO. La precisión mejora a medida que confirmas la completitud de los sets.
Este sitio no está afiliado ni respaldado por el Grupo LEGO.



![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6047417.jpg)

![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6042956.jpg)



