


Le LEGO Icons NASA Artemis Space Launch System (10341-1) construit le lanceur spatial de la NASA avec 3601 pièces. Ce modèle présente une fusée à plusieurs étages et deux propulseurs à poudre, accompagnés d'une tour de lancement mobile. L'ensemble inclut des ombilicaux de la tour de lancement rétractables et une passerelle d'accès pour l'équipage, tous deux fonctionnels. Les constructeurs peuvent détacher les propulseurs à poudre et séparer les étages de la fusée pour révéler la capsule Orion, équipée de panneaux solaires déployables. Ce module s'intègre à la fusée ou s'expose sur un support de présentation distinct. Une plaque imprimée apporte une touche soignée à ce modèle spatial détaillé.
Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Sticker Sheet for Set 10341-1 10107839 | Unknown | 1× |
![]() Tile 6 x 6 with Bottom Tubes 10202 | Noir | 1× |
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Gris bleuté clair | 2× |
![]() Bar Holder with Clip 11090 | Gris bleuté clair | 56× |
![]() Bar Holder with Clip 11090 | Rouge | 1× |
![]() Tile Special 2 x 2 Inverted 11203 | Blanc | 4× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Jaune | 6× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Gris bleuté foncé | 6× |
![]() Plate 3 x 3 11212 | Noir | 12× |
![]() Plate Special 1 x 2 with Pin Hole on Top 11458 | Gris bleuté foncé | 2× |
Affichage de 10 sur 394 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Tile Special 2 x 2 Inverted | 11203 | Blanc | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Jaune | 6× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Gris bleuté foncé | 6× |
| Plate 3 x 3 | 11212 | Noir | 12× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Gris bleuté foncé | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Gris bleuté clair | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Orange foncé | 8× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Blanc | 4× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Gris bleuté clair | 4× |
| Panel 1 x 4 x 2 with Side Supports - Hollow Studs | 14718 | Gris bleuté foncé | 8× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Gris bleuté clair | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Orange foncé | 114× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Gris bleuté foncé | 10× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Blanc | 6× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Orange | 24× |
| Tile Round 2 x 2 with Hole | 15535 | Noir | 6× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Beige foncé | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Noir | 10× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Noir | 32× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Orange foncé | 4× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Gris bleuté clair | 60× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Orange | 20× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Blanc | 4× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Gris bleuté foncé | 4× |
| Plate Round 1 x 2 Half Circle with Stud (Jumper) | 1745 | Noir | 2× |
| Plate Special 1 x 2 with Handles on Ends | 18649 | Gris bleuté foncé | 2× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Gris bleuté clair | 33× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Blanc | 11× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Blanc | 1× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Gris bleuté foncé | 2× |
| Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] | 1927 | Gris bleuté clair | 6× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Gris bleuté clair | 5× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Gris bleuté foncé | 8× |
| Tile Special 2 x 3 Pentagonal | 22385 | Blanc | 1× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Gris bleuté clair | 1× |
| Bar Holder with Hole and Bar Handle | 23443 | Gris bleuté clair | 128× |
| Bar Holder with Hole and Bar Handle | 23443 | Gris bleuté foncé | 3× |
| Lattice 3 x 6 Module with Studs | 23444 | Argent mat | 2× |
| Brick 2 x 2 Corner | 2357 | Blanc | 4× |
| Technic Axle 11 | 23948 | Gris bleuté clair | 2× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Gris bleuté foncé | 80× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Rouge | 4× |
| Plate 2 x 2 Corner | 2420 | Beige foncé | 2× |
| Plate 2 x 2 Corner | 2420 | Gris bleuté foncé | 2× |
| Tile Round 1 x 1 Half Circle | 24246 | Gris bleuté clair | 5× |
| Tile 1 x 4 with Groove | 2431 | Noir | 1× |
| Tile 1 x 4 with Groove | 2431 | Gris bleuté foncé | 4× |
| Tile 1 x 4 with Groove | 2431 | Gris bleuté clair | 7× |
| Tile 1 x 4 with Solar Panels Print | 2431pr0115 | Bleu foncé | 4× |
| Tile Special 1 x 2 with Handle | 2432 | Gris bleuté clair | 11× |
| Plate 2 x 12 | 2445 | Beige | 2× |
| Plate 2 x 12 | 2445 | Gris bleuté foncé | 8× |
| Brick 2 x 6 | 2456 | Rouge | 10× |
| Brick 2 x 6 | 2456 | Gris bleuté clair | 7× |
| Brick 2 x 6 | 2456 | Noir | 3× |
| Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout | 24593 | Blanc | 2× |
| Brick 1 x 16 | 2465 | Gris bleuté clair | 8× |
| Vehicle Track, Roller Coaster Straight 16L | 25059 | Gris bleuté clair | 1× |
| Plate Special 1 x 2 with Long Towball | 2508 | Gris bleuté foncé | 6× |
| Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | 25214 | Blanc | 5× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Gris bleuté foncé | 2× |
| Vehicle Track, Roller Coaster Straight 8L | 26022 | Gris bleuté clair | 5× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Blanc | 4× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Gris bleuté clair | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Gris bleuté clair | 22× |
| Tile 2 x 3 | 26603 | Beige foncé | 2× |
| Technic Axle Towball | 2736 | Gris bleuté clair | 4× |
| Turntable 2 x 2 Female | 27448 | Blanc | 1× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Gris bleuté foncé | 3× |
| Technic Steering Wheel Small (3 Studs Diameter) | 2819 | Gris bleuté clair | 1× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Blanc | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Gris bleuté clair | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Beige foncé | 8× |
| Brick Special 1 x 2 with Grille | 2877 | Gris bleuté foncé | 282× |
| Brick Special 1 x 2 with Grille | 2877 | Blanc | 5× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Gris bleuté foncé | 8× |
| Brick 2 x 4 | 3001 | Rose vif | 1× |
| Brick 2 x 4 | 3001 | Noir | 2× |
| Brick 2 x 4 | 3001 | Rouge | 2× |
| Brick 2 x 4 | 3001 | Gris bleuté foncé | 10× |
| Brick 2 x 3 | 3002 | Rouge | 12× |
| Brick 2 x 2 | 3003 | Rouge | 2× |
| Brick 2 x 2 | 3003 | Beige | 13× |
| Brick 1 x 2 | 3004 | Orange | 8× |
| Brick 1 x 1 | 3005 | Gris bleuté foncé | 42× |
| Brick 1 x 1 | 3005 | Gris bleuté clair | 2× |
| Brick 1 x 1 | 3005 | Blanc | 2× |
| Brick 1 x 1 | 3005 | Beige | 2× |
| Brick 1 x 8 | 3008 | Gris bleuté foncé | 8× |
| Brick 1 x 6 | 3009 | Gris bleuté foncé | 27× |
| Brick 1 x 6 | 3009 | Gris bleuté clair | 2× |
| Plate 2 x 4 | 3020 | Beige foncé | 11× |
| Plate 2 x 4 | 3020 | Gris bleuté clair | 9× |
| Plate 2 x 4 | 3020 | Noir | 1× |
| Plate 2 x 4 | 3020 | Noir | 3× |
| Plate 2 x 4 | 3020 | Gris bleuté foncé | 10× |
| Plate 2 x 3 | 3021 | Gris bleuté foncé | 11× |
| Plate 2 x 3 | 3021 | Blanc | 2× |
| Plate 2 x 3 | 3021 | Gris bleuté clair | 2× |
| Plate 2 x 3 | 3021 | Noir | 1× |
| Plate 2 x 3 | 3021 | Beige | 8× |
| Plate 2 x 2 | 3022 | Beige foncé | 2× |
| Plate 2 x 2 | 3022 | Gris bleuté foncé | 54× |
| Plate 1 x 2 | 3023 | Rouge | 5× |
| Plate 1 x 2 | 3023 | Jaune | 2× |
| Plate 1 x 2 | 3023 | Noir | 7× |
| Plate 1 x 2 | 3023 | Gris bleuté clair | 42× |
| Plate 1 x 2 | 3023 | Beige foncé | 8× |
| Plate 1 x 2 | 3023 | Gris bleuté foncé | 7× |
| Plate 1 x 2 | 3023 | Gris bleuté clair | 2× |
| Plate 1 x 2 | 3023 | Orange foncé | 4× |
| Plate 1 x 1 | 3024 | Nougat | 2× |
| Plate 1 x 1 | 3024 | Gris bleuté clair | 6× |
| Plate 1 x 1 | 3024 | Gris bleuté foncé | 2× |
| Plate 4 x 12 | 3029 | Gris bleuté clair | 6× |
| Plate 4 x 10 | 3030 | Gris bleuté foncé | 2× |
| Plate 4 x 4 | 3031 | Noir | 12× |
| Plate 4 x 4 | 3031 | Blanc | 5× |
| Plate 4 x 6 | 3032 | Gris bleuté foncé | 6× |
| Plate 6 x 10 | 3033 | Gris bleuté foncé | 2× |
| Plate 2 x 8 | 3034 | Noir | 2× |
| Plate 2 x 8 | 3034 | Gris bleuté foncé | 2× |
| Plate 4 x 8 | 3035 | Beige foncé | 6× |
| Plate 4 x 8 | 3035 | Gris bleuté clair | 2× |
| Plate 6 x 8 | 3036 | Beige foncé | 6× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Noir | 1× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Gris bleuté clair | 19× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Gris bleuté foncé | 4× |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | 30383 | Noir | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | 30383 | Gris bleuté clair | 1× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Noir | 4× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Jaune | 14× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Gris bleuté foncé | 6× |
| Brick Round 1 x 1 Open Stud | 3062b | Rouge | 1× |
| Brick Round 1 x 1 Open Stud | 3062b | Blanc | 1× |
| Brick Round 1 x 1 Open Stud | 3062b | Gris bleuté clair | 1× |
| Tile 2 x 2 with Groove | 3068b | Gris bleuté foncé | 20× |
| Tile 1 x 2 with Groove | 3069b | Gris bleuté foncé | 2× |
| Tile 1 x 1 with Groove | 3070b | Noir | 4× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Gris bleuté clair | 6× |
| Technic Link 1 x 6 without Stoppers | 32005a | Gris bleuté foncé | 2× |
| Technic Axle and Pin Connector Angled #6 - 90° | 32014 | Gris bleuté clair | 1× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Gris bleuté foncé | 1× |
| Plate Special 1 x 2 with Door Rail | 32028 | Blanc | 8× |
| Plate Special 1 x 2 with Door Rail | 32028 | Gris bleuté foncé | 108× |
| Plate Special 1 x 2 with Door Rail | 32028 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Argent mat | 1× |
| Plate Special 1 x 2 with Door Rail | 32028 | Orange foncé | 8× |
| Plate Special 1 x 2 with Door Rail | 32028 | Orange | 12× |
| Technic Axle 2 Notched | 32062 | Rouge | 2× |
| Technic Axle 2 Notched | 32062 | Noir | 4× |
| Technic Axle 5 | 32073 | Gris bleuté clair | 2× |
| Technic Axle 5 | 32073 | Jaune | 1× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Gris bleuté clair | 2× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Jaune | 3× |
| Technic Axle and Pin Connector Toggle Joint Smooth | 32126 | Gris bleuté foncé | 8× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Gris bleuté foncé | 3× |
| Window 1 x 2 x 3 Train with Inside Stud Holder | 3233 | Gris bleuté clair | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Gris bleuté foncé | 10× |
| Technic Beam 1 x 3 Thick | 32523 | Gris bleuté clair | 1× |
| Slope Inverted 45° 4 x 1 Double with 1 x 2 Recessed | 32802 | Rouge | 1× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Gris bleuté foncé | 1× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Gris bleuté foncé | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Gris bleuté clair | 5× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Orange foncé | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Beige foncé | 2× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Gris bleuté clair | 10× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Blanc | 5× |
| Plate 1 x 8 | 3460 | Gris bleuté clair | 53× |
| Plate 1 x 8 | 3460 | Gris bleuté foncé | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Gris bleuté foncé | 3× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Gris bleuté clair | 8× |
| Plate Special 4 x 4 with 3 x 3 Quarter Round Cutout | 35044 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Rouge | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Blanc | 15× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Gris bleuté clair | 26× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Gris bleuté clair | 2× |
| Plant, Beehive / Nest | 35574 | Pearl Titanium | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Gris bleuté foncé | 6× |
| Brick 1 x 3 | 3622 | Gris bleuté foncé | 7× |
| Plate 1 x 3 | 3623 | Gris bleuté clair | 4× |
| Plate 1 x 3 | 3623 | Gris bleuté foncé | 6× |
| Plate 1 x 3 | 3623 | Beige | 2× |
| Fence Lattice 1 x 4 x 1 | 3633 | Gris bleuté foncé | 6× |
| Fence Lattice 1 x 4 x 1 | 3633 | Blanc | 2× |
| Plate 1 x 6 | 3666 | Gris bleuté clair | 4× |
| Plate 1 x 6 | 3666 | Gris bleuté foncé | 18× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Gris bleuté foncé | 2× |
| Technic Axle 4 | 3705 | Rouge | 1× |
| Technic Axle 8 | 3707 | Rouge | 1× |
| Plate 1 x 4 | 3710 | Gris bleuté clair | 17× |
| Plate 1 x 4 | 3710 | Gris bleuté foncé | 15× |
| Technic Bush | 3713 | Gris bleuté clair | 9× |
| Technic Plate 2 x 8 [7 Holes] | 3738 | Noir | 4× |
| Technic Gear Rack 1 x 4 | 3743 | Gris bleuté clair | 5× |
| Equipment Candlestick | 37762 | Gris bleuté clair | 16× |
| Equipment Candlestick | 37762 | Blanc | 2× |
| Plate 2 x 6 | 3795 | Gris bleuté clair | 9× |
| Plate 2 x 6 | 3795 | Orange foncé | 1× |
| Plate 2 x 6 | 3795 | Blanc | 17× |
| Plate 2 x 6 | 3795 | Beige foncé | 2× |
| Plate 2 x 6 | 3795 | Gris bleuté foncé | 5× |
| Plate 2 x 10 | 3832 | Jaune | 2× |
| Plate 2 x 10 | 3832 | Rouge | 1× |
| Plate 2 x 10 | 3832 | Gris bleuté clair | 3× |
| Plate 2 x 10 | 3832 | Beige | 2× |
| Hinge Brick 1 x 2 Base | 3937 | Gris bleuté foncé | 2× |
| Hinge Brick 1 x 2 Top Plate Thin | 3938 | Noir | 1× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Gris bleuté foncé | 2× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Blanc | 1× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Gris bleuté clair | 16× |
| Cone 2 x 2 x 2, Open Stud | 3942c | Gris bleuté foncé | 1× |
| Cone 2 x 2 x 2, Open Stud | 3942c | Noir | 1× |
| Cone 2 x 2 x 2, Open Stud | 3942c | Blanc | 3× |
| Bracket 2 x 2 - 2 x 2 | 3956 | Blanc | 6× |
| Antenna 1 x 4 with Flat Top | 3957b | Noir | 1× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Blanc | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Gris bleuté clair | 16× |
| Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | 40379 | Gris bleuté clair | 1× |
| Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | 40379 | Rouge | 1× |
| Brick Special 1 x 1 with Headlight | 4070 | Gris bleuté clair | 4× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Blanc | 2× |
| Tile 1 x 8 with Groove | 4162 | Rouge | 1× |
| Technic Beam 1 x 2 Thin | 41677 | Gris bleuté foncé | 1× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Gris bleuté foncé | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Beige foncé | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Gris bleuté clair | 1× |
| Technic Wedge Belt Wheel [aka Pulley] | 4185 | Blanc | 16× |
| Technic Wedge Belt Wheel [aka Pulley] | 4185 | Noir | 12× |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 42003 | Gris bleuté foncé | 2× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Gris bleuté clair | 1× |
| Technic Pin 1/2 | 4274 | Blanc | 1× |
| Technic Pin 1/2 | 4274 | Gris bleuté clair | 2× |
| Plate 2 x 16 | 4282 | Gris bleuté clair | 9× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Noir | 5× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Noir | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Noir | 26× |
| Wedge Plate 3 x 2 Right | 43722 | Gris bleuté foncé | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Gris bleuté foncé | 2× |
| Dish 3 x 3 Inverted [Radar] | 43898 | Blanc | 1× |
| Technic Axle 7 | 44294 | Gris bleuté clair | 4× |
| Dish 6 x 6 Inverted (Radar) with Solid Studs | 44375b | Noir | 1× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Gris bleuté foncé | 18× |
| Plate 1 x 10 | 4477 | Gris bleuté clair | 4× |
| Plate 1 x 10 | 4477 | Gris bleuté foncé | 14× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Gris bleuté clair | 4× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Nougat moyen | 1× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 44874 | Gris bleuté clair | 4× |
| Plate Special 1 x 8 with Door Rail | 4510 | Orange foncé | 16× |
| Technic Axle 3 | 4519 | Gris bleuté clair | 2× |
| Brick Round 1 x 1 with Fins, Open Stud | 4588 | Blanc | 1× |
| Plate Special 1 x 4 Offset with Bar Holes | 4590 | Gris bleuté foncé | 2× |
| Tap 1 x 1 without Hole in Spout | 4599b | Gris bleuté clair | 88× |
| Tap 1 x 1 without Hole in Spout | 4599b | Rouge | 2× |
| Tap 1 x 1 without Hole in Spout | 4599b | Blanc | 4× |
| Brick Special 1 x 1 Studs on 4 Sides | 4733 | Blanc | 1× |
| Cone 4 x 4 x 2 Hollow No Studs with 'NASA', USA Flag print | 4742pr0001 | Blanc | 1× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Gris bleuté foncé | 6× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Gris bleuté foncé | 2× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Gris bleuté foncé | 2× |
| Technic Axle 32 | 50450 | Noir | 2× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Noir | 2× |
| Slope Inverted 45° 6 x 1 Double with 1 x 4 Recessed | 52501 | Gris bleuté foncé | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Noir | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Blanc | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Gris bleuté foncé | 10× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Orange foncé | 20× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Noir | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Blanc | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Gris bleuté clair | 10× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Blanc | 1× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Gris bleuté foncé | 4× |
| Plate 1 x 12 | 60479 | Gris bleuté clair | 9× |
| Slope 65° 2 x 1 x 2 | 60481 | Blanc | 2× |
| Slope 65° 2 x 1 x 2 | 60481 | Gris bleuté foncé | 12× |
| Window 1 x 2 x 2 Flat Front | 60592 | Gris bleuté clair | 2× |
| Window 1 x 2 x 2 Flat Front | 60592 | Gris bleuté foncé | 3× |
| Equipment Hose Nozzle / Gun with Side String Hole Simplified | 60849 | Gris bleuté clair | 2× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Gris bleuté foncé | 15× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Gris bleuté foncé | 6× |
| Brick 1 x 10 | 6111 | Beige | 9× |
| Brick 1 x 12 | 6112 | Gris bleuté foncé | 9× |
| Technic Pin 1/2 with 2L Bar Extension | 61184 | Gris bleuté clair | 36× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Noir | 114× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Gris bleuté clair | 1× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Gris bleuté clair | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-transparent | 17× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Argent mat | 9× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Blanc | 7× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Noir | 2× |
| Plate Special 4 x 6 with Studs on 3 Edges | 6180 | Gris bleuté clair | 2× |
| Plate Special 4 x 6 with Studs on 3 Edges | 6180 | Beige foncé | 28× |
| Technic Universal Joint 3L [Complete Assembly] | 61903 | Gris bleuté clair | 4× |
| Cone 3 x 3 x 2 | 6233 | Blanc | 4× |
| Technic Pin Connector Round [Slotted] | 62462 | Gris bleuté clair | 104× |
| Technic Pin Connector Round [Slotted] | 62462 | Blanc | 4× |
| Tile 1 x 3 | 63864 | Gris bleuté clair | 1× |
| Tile 1 x 3 | 63864 | Beige foncé | 4× |
| Tile 1 x 3 | 63864 | Gris bleuté foncé | 4× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Gris bleuté clair | 19× |
| Bar 6L with Stop Ring | 63965 | Rouge | 9× |
| Bar 6L with Stop Ring | 63965 | Gris bleuté clair | 48× |
| Bar 6L with Stop Ring | 63965 | Orange | 11× |
| Support 1 x 6 x 5 Girder Rectangular | 64448 | Gris bleuté clair | 7× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Rouge | 8× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Orange clair vif | 1× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Gris bleuté clair | 34× |
| Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3 | 64644 | Gris bleuté clair | 20× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Beige | 2× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Gris bleuté foncé | 40× |
| Barrel Half Large with Axle Hole | 64951 | Blanc | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Gris bleuté clair | 8× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Gris bleuté clair | 5× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Gris bleuté foncé | 4× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Gris bleuté foncé | 1× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Gris bleuté clair | 10× |
| Plate Special 1 x 6 with Train Wagon End Fence | 6583 | Gris bleuté clair | 2× |
| Tile 1 x 6 with Groove | 6636 | Gris bleuté foncé | 21× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Noir | 1× |
| Tile 2 x 6 | 69729 | Jaune | 11× |
| Tile 2 x 6 | 69729 | Gris bleuté clair | 1× |
| Technic Axle and Pin Connector Perpendicular Double Split [Reinforced] | 69819 | Gris bleuté foncé | 1× |
| Brick Round 3 x 3 x 2 Recessed Center with 2 x 2 Studs and Axle Hole | 73111 | Blanc | 13× |
| Brick Round 3 x 3 x 2 Recessed Center with 2 x 2 Studs and Axle Hole and Black Rectangles print | 73111pr0001 | Blanc | 4× |
| Brick Round 3 x 3 x 2 Recessed Center with 2 x 2 Studs and Axle Hole and Black Squares print | 73111pr0002 | Blanc | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Gris bleuté foncé | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Gris bleuté clair | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Nougat moyen | 4× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Gris bleuté foncé | 6× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Gris bleuté clair | 2× |
| Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | 75937 | Blanc | 2× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Gris bleuté foncé | 2× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Noir | 4× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Gris bleuté clair | 58× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Gris bleuté clair | 18× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Noir | 1× |
| Bar 2L with Stop in Center | 78258 | Noir | 4× |
| Bar 2L with Stop in Center | 78258 | Rouge | 1× |
| Plate 1 x 5 | 78329 | Gris bleuté foncé | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Blanc | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Gris bleuté clair | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Gris bleuté foncé | 4× |
| Plate Round 1 x 1 with Open Stud | 85861 | Rouge | 2× |
| Plate Round 1 x 1 with Open Stud | 85861 | Noir | 4× |
| Plate Round 1 x 1 with Open Stud | 85861 | Blanc | 2× |
| Cylinder Half 2 x 4 x 5 with 1 x 2 cutout | 85941 | Blanc | 2× |
| Technic Brick 1 x 2 with Hole and Dual Beam Extensions | 85943 | Gris bleuté foncé | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Orange foncé | 12× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Gris bleuté foncé | 8× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Gris bleuté foncé | 4× |
| Tile 2 x 4 with Groove | 87079 | Gris bleuté clair | 2× |
| Tile 2 x 4 with Groove | 87079 | Blanc | 2× |
| Technic Axle 4 with Stop | 87083 | Gris bleuté foncé | 1× |
| Technic Gear 20 Tooth Bevel with Pin Hole | 87407 | Gris bleuté clair | 1× |
| Bar 5L with Handle (Friction Ram) | 87618 | Gris bleuté clair | 6× |
| Wedge 2 x 2 Facet | 87620 | Gris bleuté foncé | 4× |
| Bar 3L | 87994 | Rouge | 3× |
| Bar 3L | 87994 | Noir | 32× |
| Bar 3L | 87994 | Gris bleuté clair | 56× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Gris bleuté clair | 6× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Gris bleuté foncé | 2× |
| Technic Pin 1/2 with Friction | 89678 | Rouge | 4× |
| Technic Pin 1/2 with Friction | 89678 | Gris bleuté foncé | 18× |
| Technic Panel Fairing 2 x 1 x 1 | 89679 | Blanc | 8× |
| Window 1 x 2 x 2 Castle | 90195 | Gris bleuté clair | 2× |
| Brick Special 2 x 2 with Grooves and Axle Hole | 90258 | Gris bleuté foncé | 1× |
| Plate 2 x 14 | 91988 | Noir | 5× |
| Aircraft Fuselage Curved Forward 6 x 7 x 2 2/3 Top | 92832 | Orange foncé | 2× |
| Brick Round 2 x 2 [Grill] | 92947 | Noir | 5× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Orange | 4× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Gris bleuté clair | 2× |
| Slope Curved 3 x 4 x 2/3 Triple Curved with 2 Sunk Studs | 93604 | Blanc | 4× |
| Support 2 x 2 x 10 Girder Triangular Vertical - Type 4 - 3 Posts, 3 Sections | 95347 | Gris bleuté clair | 2× |
| Brick and Axle Separator v2.0 | 96874 | Orange | 1× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Noir | 1× |
| Brick Round 2 x 2 Truncated Cone with Cockpit print | 98100pr0014 | Gris bleuté clair | 1× |
| Tile Round 1 x 1 | 98138 | Gris bleuté foncé | 8× |
| Tile Round 1 x 1 | 98138 | Jaune | 2× |
| Pneumatic Hose Connector with Axle Connector | 99021 | Gris bleuté foncé | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris bleuté clair | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris bleuté foncé | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Argent mat | 16× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Gris bleuté clair | 11× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Blanc | 5× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Orange foncé | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Gris bleuté clair | 1× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Gris bleuté foncé | 12× |
ADN du build
Apercu des pieces de NASA Artemis Space Launch System
Avec 3 601 pieces, ce build est a +73% par rapport au set Icons moyen et a +535% par rapport a la sortie moyenne de 2024.
Par rapport au set Icons moyen
Set Icons moyen : 2 076 pieces sur 80 autres sets.
Par rapport au set moyen de 2024
Set moyen de 2024 : 567 pieces sur 561 autres sets.
Profil couleur
Couleur dominante
Gris bleuté clair
Pieces uniques
14.5 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Brick Special 1 x 2 with Grille
287xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.


![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6045988.jpg)






