
TRASH TREK Challenge Kit
🏷️ 45801-1•🎨 FIRST LEGO League•📅 2015•🧱 1990 pièces•Avancé
TRASH TREK Challenge Kit (45801-1) is a LEGO FIRST LEGO League from 2015. This page uses the available set and theme data until a fuller product description is available.
Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Gris bleuté clair | 4× |
![]() Technic Gear 8 Tooth [Reinforced] 10928 | Gris bleuté foncé | 6× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Rouge | 1× |
![]() Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle 11214 | Gris bleuté foncé | 7× |
![]() Plate Special 1 x 2 with Pin Hole on Top 11458 | Gris bleuté foncé | 2× |
![]() Technic Beam 1 x 5 Thin with Axle Holes on Ends 11478 | Noir | 3× |
![]() Tap 1 x 2 with Dual Handles, Small 13770 | Or nacré | 1× |
![]() Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring 13971 | Gris bleuté clair | 4× |
![]() Technic Beam 3 x 5 Thick [90° Offset Centre Beam Holes] 14720 | Gris bleuté clair | 1× |
![]() Tile Round 2 x 2 with Bottom Stud Holder 14769 | Gris bleuté clair | 2× |
Affichage de 10 sur 328 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Technic Beam 1 x 5 Thin with Axle Holes on Ends | 11478 | Noir | 3× |
| Tap 1 x 2 with Dual Handles, Small | 13770 | Or nacré | 1× |
| Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring | 13971 | Gris bleuté clair | 4× |
| Technic Beam 3 x 5 Thick [90° Offset Centre Beam Holes] | 14720 | Gris bleuté clair | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Gris bleuté clair | 2× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 15100 | Noir | 7× |
| Tile Round 2 x 2 with Hole | 15535 | Beige | 1× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Gris bleuté clair | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Gris bleuté clair | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Blanc | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Gris bleuté clair | 12× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Rouge | 1× |
| Brick Round 2 x 2, Pin Holes | 17485 | Jaune | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Noir | 6× |
| Brick 2 x 2 Corner | 2357 | Gris bleuté clair | 6× |
| Brick 2 x 2 Corner | 2357 | Noir | 4× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Gris bleuté clair | 6× |
| Tile 1 x 4 with Groove | 2431 | Gris bleuté clair | 34× |
| Tile 1 x 4 with Groove | 2431 | Gris bleuté foncé | 1× |
| Tile 1 x 4 with Groove | 2431 | Noir | 3× |
| Tile 1 x 4 with Groove | 2431 | Blanc | 3× |
| Tile 1 x 4 with Groove | 2431 | Jaune | 2× |
| Plate 2 x 12 | 2445 | Noir | 4× |
| Brick Special 1 x 2 with Pin | 2458 | Gris bleuté clair | 4× |
| Brick Special 1 x 2 with Pin | 2458 | Blanc | 4× |
| Brick Special 1 x 2 with Pin | 2458 | Gris bleuté foncé | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-jaune | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Gris bleuté foncé | 16× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Gris bleuté clair | 1× |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | 2780 | Noir | 193× |
| Technic Beam 1 x 4 Thin with Stud Connector | 2825 | Rouge | 2× |
| Technic Beam 1 x 4 Thin with Stud Connector | 2825 | Gris bleuté clair | 2× |
| Brick 2 x 4 | 3001 | Gris bleuté clair | 18× |
| Brick 2 x 4 | 3001 | Gris bleuté foncé | 4× |
| Brick 2 x 4 | 3001 | Jaune | 9× |
| Brick 2 x 3 | 3002 | Gris bleuté clair | 4× |
| Brick 2 x 2 | 3003 | Noir | 12× |
| Brick 2 x 2 | 3003 | Gris bleuté foncé | 1× |
| Brick 2 x 2 | 3003 | Gris bleuté clair | 4× |
| Brick 1 x 2 | 3004 | Gris bleuté clair | 12× |
| Brick 1 x 2 | 3004 | Jaune | 4× |
| Brick 1 x 2 | 3004 | Gris bleuté clair | 1× |
| Brick 1 x 2 | 3004 | Blanc | 1× |
| Window 1 x 2 x 2 2/3 with Rounded Top | 30044 | Marron rougeâtre | 1× |
| Window 1 x 2 x 2 2/3 Pane Lattice Diamond with Rounded Top | 30046 | Or nacré | 1× |
| Brick 1 x 1 | 3005 | Rouge | 2× |
| Brick 1 x 1 | 3005 | Jaune | 4× |
| Brick 2 x 10 | 3006 | Noir | 6× |
| Brick 1 x 8 | 3008 | Gris bleuté clair | 6× |
| Brick 1 x 8 | 3008 | Noir | 4× |
| Brick 1 x 6 | 3009 | Jaune | 5× |
| Brick 1 x 6 | 3009 | Noir | 3× |
| Brick 1 x 6 | 3009 | Noir | 10× |
| Brick 1 x 6 | 3009 | Gris bleuté clair | 8× |
| Brick 1 x 6 | 3009 | Gris bleuté foncé | 4× |
| Brick 1 x 4 | 3010 | Noir | 8× |
| Brick 1 x 4 | 3010 | Jaune | 2× |
| Brick 1 x 4 | 3010 | Gris bleuté clair | 8× |
| Brick 1 x 4 | 3010 | Gris bleuté foncé | 3× |
| Plate 2 x 4 | 3020 | Gris bleuté clair | 2× |
| Plate 2 x 4 | 3020 | Blanc | 2× |
| Plate 2 x 4 | 3020 | Noir | 16× |
| Plate 2 x 3 | 3021 | Rouge | 1× |
| Plate 2 x 3 | 3021 | Noir | 2× |
| Plate 2 x 2 | 3022 | Gris bleuté foncé | 1× |
| Plate 2 x 2 | 3022 | Gris bleuté clair | 1× |
| Plate 2 x 2 | 3022 | Rouge | 1× |
| Plate 2 x 2 | 3022 | Noir | 2× |
| Plate 1 x 2 | 3023 | Jaune | 1× |
| Plate 1 x 2 | 3023 | Noir | 6× |
| Plate 1 x 2 | 3023 | Noir | 6× |
| Plate 1 x 2 | 3023 | Rouge | 5× |
| Plate 1 x 2 | 3023 | Blanc | 2× |
| Plate 1 x 1 | 3024 | Gris bleuté clair | 4× |
| Plate 1 x 1 | 3024 | Blanc | 2× |
| Plate 4 x 10 | 3030 | Gris bleuté foncé | 2× |
| Plate 4 x 4 | 3031 | Gris bleuté foncé | 1× |
| Plate 4 x 6 | 3032 | Noir | 2× |
| Plate 4 x 6 | 3032 | Gris bleuté clair | 2× |
| Plate 4 x 6 | 3032 | Rouge | 1× |
| Plate 2 x 8 | 3034 | Gris bleuté clair | 5× |
| Plate 2 x 8 | 3034 | Noir | 3× |
| Plate 2 x 8 | 3034 | Jaune | 9× |
| Plate 6 x 8 | 3036 | Noir | 2× |
| Plate 6 x 8 | 3036 | Gris bleuté foncé | 2× |
| Slope 45° 2 x 4 | 3037 | Noir | 2× |
| Slope 45? 2 x 2 | 3039 | Gris bleuté foncé | 4× |
| Slope 45? 2 x 2 | 3039 | Noir | 5× |
| Slope 45? 2 x 2 | 3039 | Gris bleuté clair | 3× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Noir | 2× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Blanc | 1× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Gris bleuté clair | 2× |
| Slope 45° 2 x 2 Double Concave | 3046a | Gris bleuté foncé | 4× |
| Slope 45° 2 x 2 Double Concave | 3046a | Noir | 6× |
| Brick 1 x 2 without Bottom Tube | 3065 | Trans-bleu foncé | 8× |
| Tile 2 x 2 with Groove | 3068b | Blanc | 2× |
| Tile 2 x 2 with Groove | 3068b | Noir | 10× |
| Tile 2 x 2 with Groove | 3068b | Rouge | 1× |
| Tile 2 x 2 with Groove | 3068b | Gris bleuté clair | 2× |
| Tile 1 x 2 with Groove | 3069b | Gris bleuté clair | 6× |
| Tile 1 x 2 with Groove | 3069b | Gris bleuté clair | 7× |
| Tile 1 x 2 with Groove | 3069b | Gris bleuté foncé | 3× |
| Tile 1 x 2 with Groove | 3069b | Noir | 6× |
| Tile 1 x 2 with Groove | 3069b | Jaune | 1× |
| Tile 1 x 2 with Groove | 3069b | Noir | 2× |
| Tile 1 x 1 with Groove | 3070b | Rouge | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Blanc | 3× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Noir | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gris bleuté clair | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Rouge | 1× |
| Technic Beam 1 x 11.5 Double Bent Thick | 32009 | Noir | 4× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Rouge | 20× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Noir | 10× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Noir | 2× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Gris bleuté clair | 9× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Rouge | 2× |
| Technic Axle Connector with Axle Hole | 32039 | Gris bleuté clair | 1× |
| Technic Axle Connector with Axle Hole | 32039 | Noir | 4× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Gris bleuté clair | 10× |
| Technic Axle 2 Notched | 32062 | Noir | 24× |
| Technic Axle 2 Notched | 32062 | Rouge | 28× |
| Technic Beam 1 x 6 Thin | 32063 | Noir | 1× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Noir | 48× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Gris bleuté clair | 12× |
| Technic Axle 5 | 32073 | Gris bleuté clair | 20× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Gris bleuté clair | 2× |
| Technic Pin Double with Axle Hole | 32138 | Gris bleuté clair | 4× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Noir | 5× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Noir | 8× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Rouge | 3× |
| Technic Beam 1 x 9 Bent (7 - 3) Thick | 32271 | Noir | 1× |
| Technic Beam 1 x 9 Bent (7 - 3) Thick | 32271 | Gris bleuté foncé | 6× |
| Technic Beam 1 x 15 Thick | 32278 | Rouge | 21× |
| Technic Beam 1 x 15 Thick | 32278 | Noir | 18× |
| Technic Beam 1 x 15 Thick | 32278 | Noir | 8× |
| Technic Beam 1 x 15 Thick | 32278 | Gris bleuté clair | 4× |
| Technic Axle and Pin Connector Perpendicular Double | 32291 | Rouge | 4× |
| Technic Beam 1 x 5 Thick | 32316 | Noir | 9× |
| Technic Beam 1 x 5 Thick | 32316 | Rouge | 11× |
| Technic Beam 1 x 5 Thick | 32316 | Gris bleuté clair | 2× |
| Technic Beam 1 x 7 Bent (4 - 4) Thick | 32348 | Rouge | 4× |
| Technic Beam 1 x 4 Thin | 32449 | Rouge | 4× |
| Technic Beam 1 x 4 Thin | 32449 | Noir | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Gris bleuté clair | 14× |
| Technic Beam 1 x 3 Thick | 32523 | Noir | 2× |
| Technic Beam 1 x 3 Thick | 32523 | Gris bleuté clair | 5× |
| Technic Beam 1 x 3 Thick | 32523 | Gris bleuté clair | 2× |
| Technic Beam 1 x 3 Thick | 32523 | Rouge | 3× |
| Technic Beam 1 x 7 Thick | 32524 | Noir | 8× |
| Technic Beam 1 x 7 Thick | 32524 | Noir | 4× |
| Technic Beam 1 x 7 Thick | 32524 | Gris bleuté clair | 4× |
| Technic Beam 1 x 7 Thick | 32524 | Rouge | 3× |
| Technic Beam 1 x 11 Thick | 32525 | Gris bleuté foncé | 4× |
| Technic Beam 1 x 11 Thick | 32525 | Noir | 8× |
| Technic Beam 1 x 11 Thick | 32525 | Gris bleuté clair | 1× |
| Technic Beam 1 x 11 Thick | 32525 | Rouge | 2× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Noir | 4× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Gris bleuté clair | 2× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Gris bleuté foncé | 6× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Gris bleuté clair | 2× |
| Technic Pin Connector Plate with One Hole (Single on Bottom) | 32529 | Noir | 4× |
| Technic Brick 6 x 8 with 4 x 6 Opening | 32532 | Noir | 1× |
| Technic Pin Long without Friction Ridges | 32556 | Beige | 6× |
| Plant, Carrot | 33172 | Orange | 1× |
| Plant, Carrot Top | 33183 | Vert vif | 1× |
| Technic Beam 3 x 0.5 Liftarm with Boss and Pin / Crank | 33299a | Gris bleuté clair | 1× |
| Plate 6 x 14 | 3456 | Noir | 3× |
| Plate 1 x 8 | 3460 | Noir | 1× |
| Plate 1 x 8 | 3460 | Gris bleuté clair | 1× |
| Plate 1 x 8 | 3460 | Gris bleuté clair | 4× |
| Brick 1 x 3 | 3622 | Jaune | 4× |
| Technic Gear 24 Tooth [New Style with Single Axle Hole] | 3648b | Gris bleuté foncé | 14× |
| Technic Gear 40 Tooth | 3649 | Gris bleuté clair | 3× |
| Slope Inverted 45° 2 x 1 | 3665 | Jaune | 8× |
| Plate 1 x 6 | 3666 | Jaune | 2× |
| Plate 1 x 6 | 3666 | Gris bleuté clair | 6× |
| Plate 1 x 6 | 3666 | Gris bleuté foncé | 2× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Gris bleuté clair | 20× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Rouge | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Noir | 6× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Jaune | 36× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Gris bleuté foncé | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Gris bleuté clair | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Noir | 2× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Noir | 2× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Gris bleuté clair | 2× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Noir | 4× |
| Technic Axle 4 | 3705 | Noir | 10× |
| Technic Axle 6 | 3706 | Noir | 7× |
| Technic Axle 8 | 3707 | Noir | 2× |
| Technic Axle 12 | 3708 | Noir | 3× |
| Plate 1 x 4 | 3710 | Gris bleuté clair | 11× |
| Plate 1 x 4 | 3710 | Noir | 5× |
| Plate 1 x 4 | 3710 | Gris bleuté foncé | 2× |
| Technic Bush | 3713 | Gris bleuté clair | 6× |
| Technic Bush | 3713 | Rouge | 6× |
| Technic Axle 10 | 3737 | Noir | 2× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Beige | 24× |
| Plate 2 x 6 | 3795 | Gris bleuté clair | 2× |
| Plate 2 x 6 | 3795 | Gris bleuté foncé | 1× |
| Windscreen 2 x 4 x 2 | 3823 | Trans-transparent | 2× |
| Plate 2 x 10 | 3832 | Noir | 6× |
| Plate 2 x 10 | 3832 | Gris bleuté foncé | 2× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Noir | 2× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Gris bleuté foncé | 2× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Jaune | 2× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Gris bleuté clair | 8× |
| Cone 2 x 2 x 2, Open Stud | 3942c | Jaune | 2× |
| Plate 6 x 6 | 3958 | Noir | 1× |
| Plate 6 x 6 | 3958 | Gris bleuté clair | 1× |
| Plate 6 x 6 | 3958 | Rouge | 1× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Gris bleuté clair | 2× |
| Technic Beam 1 x 9 Thick | 40490 | Noir | 2× |
| Technic Beam 1 x 9 Thick | 40490 | Gris bleuté clair | 1× |
| Technic Beam 1 x 9 Thick | 40490 | Gris bleuté clair | 6× |
| Technic Beam 1 x 9 Thick | 40490 | Noir | 4× |
| Technic Beam 1 x 9 Thick | 40490 | Rouge | 5× |
| Seat / Chair 2 x 2 with Center Sprue Mark | 4079b | Rouge | 2× |
| Technic Beam 1 x 13 Thick | 41239 | Rouge | 3× |
| Technic Beam 1 x 13 Thick | 41239 | Gris bleuté foncé | 8× |
| Plate 8 x 8 | 41539 | Noir | 1× |
| Tile 1 x 8 with Groove | 4162 | Noir | 4× |
| Tile 1 x 8 with Groove | 4162 | Gris bleuté clair | 6× |
| Tile 1 x 8 with Groove | 4162 | Gris bleuté clair | 2× |
| Technic Beam 1 x 2 Thin | 41677 | Gris bleuté clair | 2× |
| Technic Beam 1 x 2 Thin | 41677 | Noir | 1× |
| Technic Axle and Pin Connector Perpendicular Double Split | 41678 | Noir | 3× |
| Wedge 4 x 2 Right | 41767 | Noir | 1× |
| Wedge 4 x 2 Left | 41768 | Noir | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Gris bleuté clair | 2× |
| Wedge Plate 4 x 2 Right | 41769 | Gris bleuté foncé | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Gris bleuté clair | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Gris bleuté foncé | 2× |
| Technic Wedge Belt Wheel [aka Pulley] | 4185 | Jaune | 2× |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 42003 | Noir | 2× |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 42003 | Rouge | 6× |
| Technic Pin 1/2 | 4274 | Noir | 4× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Noir | 49× |
| Technic Beam 1 x 2 Thick | 43857 | Noir | 1× |
| Technic Axle 7 | 44294 | Gris bleuté clair | 3× |
| Tyre 43.2 x 22 ZR | 44309 | Noir | 1× |
| Plate 1 x 10 | 4477 | Gris bleuté clair | 1× |
| Technic Axle 3 | 4519 | Gris bleuté clair | 35× |
| Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs | 45677 | Noir | 4× |
| Cone 4 x 4 x 2 Hollow No Studs | 4742 | Gris bleuté foncé | 2× |
| Panel 1 x 2 x 1 [Square Corners] | 4865a | Noir | 6× |
| Technic Pin Connector Hub Perpendicular 3L with 4 Pins | 48989 | Gris bleuté clair | 4× |
| Plate Special 1 x 1 with Tooth | 49668 | Orange clair vif | 1× |
| Slope Curved 3 x 1 No Studs | 50950 | Gris bleuté clair | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Trans-orange | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Gris bleuté clair | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Vert foncé | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Trans-jaune | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Trans-transparent | 2× |
| Technic Pin Connector Hub Perpendicular 3 x 3 Bent with 4 Pins (Pin Ridges Across Part) | 55615 | Gris bleuté clair | 4× |
| Wheel 18mm x 14mm with Axle Hole, Fake Bolts and Shallow Spokes | 55982 | Gris bleuté clair | 11× |
| Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | 56145 | Gris bleuté clair | 1× |
| Tyre 30.4 x 14 VR Solid | 58090 | Noir | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Rouge | 16× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Noir | 10× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Gris bleuté clair | 20× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Gris bleuté clair | 8× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Gris bleuté foncé | 2× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Gris bleuté clair | 4× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Noir | 3× |
| Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 60581 | Blanc | 4× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Jaune | 2× |
| Brick 1 x 10 | 6111 | Gris bleuté clair | 10× |
| Brick 1 x 10 | 6111 | Noir | 12× |
| Brick 1 x 12 | 6112 | Noir | 1× |
| Brick 1 x 12 | 6112 | Gris bleuté clair | 3× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Jaune | 1× |
| Tyre Offset Tread with Center Band 23 x 7 | 61254 | Noir | 4× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Rouge | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Or nacré | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Jaune | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rouge | 1× |
| Plate Special 6 x 12 with Studs on 3 Edges | 6178 | Gris bleuté clair | 8× |
| Technic Universal Joint 3L [Complete Assembly] | 61903 | Gris bleuté clair | 1× |
| Brick Curved 2 x 4 Double, No Studs, with Groove | 6192b | Gris bleuté foncé | 2× |
| Plate Special 6 x 16 with Studs on 3 Edges | 6205 | Noir | 2× |
| Panel 1 x 1 x 1 Corner | 6231 | Noir | 4× |
| Technic Pin Connector Round [Slotted] | 62462 | Jaune | 4× |
| Technic Beam 5 x 11 with 3 x 5 Opening Frame Thick | 64178 | Gris bleuté clair | 1× |
| Animal, Fish [Hollow Stud Mouth] | 64648 | Argent mat | 1× |
| Technic Panel 5 x 11 x 1 | 64782 | Gris bleuté clair | 3× |
| Technic Panel 5 x 11 x 1 | 64782 | Noir | 1× |
| Technic Panel 5 x 11 x 1 | 64782 | Rouge | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Gris bleuté clair | 4× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Gris bleuté clair | 4× |
| Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | 6558 | Noir | 69× |
| Technic Beam 1 x 9 Bent (6 - 4) Thick | 6629 | Noir | 4× |
| Technic Beam 1 x 9 Bent (6 - 4) Thick | 6629 | Rouge | 1× |
| Technic Beam 1 x 9 Bent (6 - 4) Thick | 6629 | Noir | 5× |
| Technic Beam 1 x 9 Bent (6 - 4) Thick | 6629 | Gris bleuté clair | 2× |
| Technic Beam 1 x 3 Thin | 6632 | Noir | 3× |
| Technic Beam 1 x 3 Thin | 6632 | Rouge | 8× |
| Tile 1 x 6 with Groove | 6636 | Jaune | 8× |
| Tile 1 x 6 with Groove | 6636 | Noir | 6× |
| Slope Inverted 45° 4 x 4 Double with 2 Holes | 72454 | Gris bleuté foncé | 1× |
| Hose, Ribbed 7mm D. 18L / 14.4cm | 78c18 | Argent mat | 1× |
| Tile 2 x 4 with Groove | 87079 | Noir | 12× |
| Tile 2 x 4 with Groove | 87079 | Jaune | 18× |
| Tile 2 x 4 with Groove | 87079 | Noir | 18× |
| Tile 2 x 4 with Groove | 87079 | Gris bleuté clair | 5× |
| Brick Round 4 x 4 Centre Hole | 87081 | Marron rougeâtre | 1× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Big Squared Pin Holes] | 87082 | Gris bleuté clair | 3× |
| Technic Axle 4 with Stop | 87083 | Gris bleuté foncé | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Rouge | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Jaune | 2× |
| Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 87544 | Noir | 34× |
| Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 87544 | Gris bleuté clair | 61× |
| Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | 87552 | Jaune | 18× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Noir | 4× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Gris bleuté clair | 1× |
| Tyre 30.4 x 14 Offset Tread [Centre Band] | 92402 | Noir | 9× |
| Animal Body Part, Dog Bone [Short] | 93160 | Blanc | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Gris bleuté clair | 2× |
| Tile Round 1 x 1 with Offset Black Eye Print | 98138pr0008 | Blanc | 4× |
| Hinge Plate 2 x 4 with Pin Hole with 3 Holes - Bottom | 98285 | Noir | 4× |
| Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes | 98585 | Gris bleuté clair | 1× |
| Technic Axle 4 with Centre Stop | 99008 | Beige | 3× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Noir | 2× |
ADN du build
Apercu des pieces de TRASH TREK Challenge Kit
Avec 1 990 pieces, ce build est a +94% par rapport au set FIRST LEGO League moyen et a +499% par rapport a la sortie moyenne de 2015.
Par rapport au set FIRST LEGO League moyen
Set FIRST LEGO League moyen : 1 028 pieces sur 48 autres sets.
Par rapport au set moyen de 2015
Set moyen de 2015 : 332 pieces sur 418 autres sets.
Profil couleur
Couleur dominante
Noir
Pieces uniques
10.3 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Technic Pin with Friction Ridges Lengthwise and Center Slots
193xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.
![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6045988.jpg)
![Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg)






![Technic Beam 3 x 5 Thick [90° Offset Centre Beam Holes]](https://cdn.rebrickable.com/media/parts/elements/6055519.jpg)
