
HYDRO DYNAMICS Challenge Kit
🏷️ 45804-1•🎨 FIRST LEGO League•📅 2017•🧱 2052 pièces•Avancé
HYDRO DYNAMICS Challenge Kit (45804-1) is a LEGO FIRST LEGO League from 2017. This page uses the available set and theme data until a fuller product description is available.
Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Wheel 14mm D. x 9.9mm with Centre Groove, Fake Bolts and 6 Spokes 11208 | Gris bleuté clair | 4× |
![]() Tyre 21 x 9.9 11209 | Noir | 4× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Gris bleuté clair | 4× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Blanc | 4× |
![]() Plate Round 6 x 6 with Hole 11213 | Azur moyen | 5× |
![]() Plate Round 6 x 6 with Hole 11213 | Blanc | 1× |
![]() Plate Round 6 x 6 with Hole 11213 | Gris bleuté clair | 1× |
![]() Plate Special 1 x 2 with Pin Hole on Top 11458 | Rouge | 2× |
![]() Slope Curved 2 x 1 No Studs [1/2 Bow] 11477 | Azur moyen | 1× |
![]() Plate Round 4 x 4 with 2 x 2 Round Opening 11833 | Trans-transparent | 13× |
Affichage de 10 sur 372 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Plate Round 6 x 6 with Hole | 11213 | Blanc | 1× |
| Plate Round 6 x 6 with Hole | 11213 | Gris bleuté clair | 1× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Rouge | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Azur moyen | 1× |
| Plate Round 4 x 4 with 2 x 2 Round Opening | 11833 | Trans-transparent | 13× |
| Plate Round 4 x 4 with 2 x 2 Round Opening | 11833 | Orange clair vif | 11× |
| Technic Panel Curved 11 x 3 with 10 Pin Holes through Panel Surface | 11954 | Azur moyen | 6× |
| Technic Panel Curved 11 x 3 with 10 Pin Holes through Panel Surface | 11954 | Noir | 4× |
| Vehicle Base 4 x 10 x 2 1/2 with Mudguards, Wheel Pins and 6 x 2 Centre Recess with 3 Holes, Red Wheel Holders | 12622c01 | Rouge | 1× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Gris bleuté clair | 1× |
| Tile 2 x 2 Corner | 14719 | Rouge | 1× |
| Technic Beam 3 x 5 Thick [90° Offset Centre Beam Holes] | 14720 | Gris bleuté clair | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Azur moyen | 15× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Jaune | 4× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Marron rougeâtre | 13× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Gris bleuté clair | 1× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 15100 | Gris bleuté clair | 12× |
| Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version] | 15254 | Gris bleuté foncé | 3× |
| Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version] | 15254 | Gris bleuté clair | 2× |
| Technic Panel 3 x 11 x 1 | 15458 | Gris bleuté foncé | 7× |
| Technic Panel 3 x 11 x 1 | 15458 | Gris bleuté clair | 6× |
| Technic Axle 5 with Stop | 15462 | Marron rougeâtre | 3× |
| Brick Special 1 x 4 with Masonry Brick Profile | 15533 | Nougat moyen | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Rouge | 4× |
| Tile Round 2 x 2 with Hole | 15535 | Gris bleuté clair | 18× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Gris bleuté foncé | 2× |
| Brick Round 2 x 2, Pin Holes | 17485 | Jaune | 3× |
| Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 18575 | Beige | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Noir | 9× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Gris bleuté clair | 10× |
| Plate Round Corners 2 x 6 Double | 18980 | Gris bleuté clair | 21× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Gris bleuté clair | 1× |
| Plate Round Half 4 x 8 | 22888 | Gris bleuté foncé | 10× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Gris bleuté clair | 3× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Gris bleuté foncé | 6× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Or nacré | 1× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Blanc | 10× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Gris bleuté clair | 28× |
| Wedge Plate 3 x 6 Cut Corners | 2419 | Gris bleuté foncé | 2× |
| Tile Round 1 x 1 Half Circle | 24246 | Gris bleuté clair | 12× |
| Tile 1 x 4 with Groove | 2431 | Rouge | 1× |
| Tile 1 x 4 with Groove | 2431 | Blanc | 4× |
| Brick 1 x 2 x 5 with Hollow Studs | 2454b | Gris bleuté foncé | 2× |
| Brick 2 x 6 | 2456 | Gris bleuté foncé | 1× |
| Brick 1 x 16 | 2465 | Gris bleuté clair | 4× |
| Technic Driving Ring Connector Smooth [4 rounded side walls] | 26287 | Rouge | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Blanc | 1× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Noir | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-jaune | 1× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Gris bleuté clair | 9× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-bleu clair | 9× |
| Technic Axle Towball | 2736 | Gris bleuté clair | 2× |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | 2780 | Noir | 158× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Gris bleuté clair | 8× |
| Brick 2 x 4 | 3001 | Nougat moyen | 1× |
| Brick 2 x 4 | 3001 | Noir | 1× |
| Brick 2 x 4 | 3001 | Gris bleuté foncé | 2× |
| Brick 2 x 2 | 3003 | Rouge | 3× |
| Brick 1 x 2 | 3004 | Blanc | 28× |
| Brick 1 x 2 | 3004 | Gris bleuté foncé | 4× |
| Brick 1 x 2 | 3004 | Rouge | 2× |
| Brick 1 x 2 | 3004 | Azur moyen | 13× |
| Brick 1 x 2 | 3004 | Orange clair vif | 5× |
| Brick 1 x 1 | 3005 | Azur moyen | 11× |
| Brick 1 x 8 | 3008 | Gris bleuté foncé | 6× |
| Brick 1 x 8 | 3008 | Gris bleuté clair | 3× |
| Brick 1 x 6 | 3009 | Azur moyen | 10× |
| Brick 1 x 4 | 3010 | Gris bleuté foncé | 8× |
| Brick 1 x 4 | 3010 | Blanc | 1× |
| Brick 1 x 4 | 3010 | Jaune | 2× |
| Brick 1 x 4 | 3010 | Rouge | 5× |
| Brick 1 x 4 | 3010 | Azur moyen | 17× |
| Plate 2 x 4 | 3020 | Gris bleuté clair | 4× |
| Plate 2 x 4 | 3020 | Noir | 1× |
| Plate 2 x 4 | 3020 | Azur moyen | 2× |
| Plate 2 x 3 | 3021 | Blanc | 7× |
| Plate 2 x 3 | 3021 | Beige | 2× |
| Plate 2 x 2 | 3022 | Blanc | 1× |
| Plate 2 x 2 | 3022 | Gris bleuté clair | 3× |
| Plate 1 x 2 | 3023 | Blanc | 7× |
| Plate 1 x 2 | 3023 | Gris bleuté clair | 7× |
| Plate 1 x 2 | 3023 | Rouge | 3× |
| Plate 1 x 2 | 3023 | Noir | 4× |
| Brick Special 1 x 2 with Vertical Clip [Open O Clip] | 30237b | Rouge | 1× |
| Plate 1 x 1 | 3024 | Trans-orange | 4× |
| Plate 6 x 12 | 3028 | Gris bleuté foncé | 1× |
| Plate 4 x 10 | 3030 | Beige | 2× |
| Plate 4 x 10 | 3030 | Gris bleuté foncé | 2× |
| Plate 4 x 10 | 3030 | Blanc | 6× |
| Plate 4 x 6 | 3032 | Rouge | 1× |
| Plate 4 x 6 | 3032 | Blanc | 2× |
| Plate 6 x 10 | 3033 | Gris bleuté clair | 1× |
| Plate 2 x 8 | 3034 | Gris bleuté clair | 10× |
| Plate 2 x 8 | 3034 | Gris bleuté foncé | 4× |
| Plate 2 x 8 | 3034 | Blanc | 10× |
| Plate 6 x 8 | 3036 | Gris bleuté clair | 1× |
| Brick Round 2 x 2 Dome Top, Hollow Stud | 30367c | Jaune | 1× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Gris bleuté clair | 1× |
| Brick Special 1 x 2 with 2 Pins, Round Pin Holes | 30526 | Gris bleuté clair | 5× |
| Brick Special 1 x 2 with 2 Pins, Round Pin Holes | 30526 | Gris bleuté foncé | 2× |
| Panel 4 x 4 x 6 Quarter Cylinder | 30562 | Blanc | 4× |
| Plate Round Corner 4 x 4 | 30565 | Blanc | 16× |
| Slope Curved 2 x 2 with Lip, No Studs | 30602 | Trans-bleu clair | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Blanc | 4× |
| Brick Round 1 x 1 Open Stud | 3062b | Gris bleuté clair | 3× |
| Brick 1 x 2 without Bottom Tube | 3065 | Trans-transparent | 4× |
| Tile 2 x 2 with Groove | 3068b | Gris bleuté clair | 2× |
| Tile 1 x 2 with Groove | 3069b | Blanc | 1× |
| Tile 1 x 2 with Groove | 3069b | Rouge | 2× |
| Tile 1 x 2 with Groove | 3069b | Gris bleuté foncé | 4× |
| Tile 1 x 2 with Black Diagonal Stripes, Large Yellow Corner Triangles Print | 3069bpr0155 | Jaune | 6× |
| Tile 1 x 1 with Groove | 3070b | Gris bleuté clair | 2× |
| Tile 1 x 1 with Groove | 3070b | Azur moyen | 1× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Gris bleuté clair | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gris bleuté foncé | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gris bleuté clair | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Blanc | 2× |
| Technic Pin 3/4 | 32002 | Beige | 4× |
| Technic Link 1 x 6 without Stoppers | 32005a | Gris bleuté foncé | 2× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Gris bleuté clair | 1× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Noir | 2× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Jaune | 4× |
| Technic Axle and Pin Connector Angled #6 - 90° | 32014 | Noir | 4× |
| Technic Axle and Pin Connector Angled #5 - 112.5° | 32015 | Gris bleuté clair | 3× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Azur moyen | 2× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Gris bleuté clair | 1× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Gris bleuté clair | 8× |
| Technic Axle Connector with Axle Hole | 32039 | Gris bleuté clair | 6× |
| Technic Axle Connector with Axle Hole | 32039 | Jaune | 3× |
| Technic Axle Connector with Axle Hole | 32039 | Noir | 4× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Gris bleuté clair | 6× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Noir | 10× |
| Technic Axle 2 Notched | 32062 | Rouge | 11× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Rouge | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Gris bleuté clair | 1× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Gris bleuté foncé | 4× |
| Technic Knob Wheel | 32072 | Noir | 2× |
| Technic Axle 5 | 32073 | Jaune | 6× |
| Technic Axle 5 | 32073 | Gris bleuté clair | 3× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Jaune | 9× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Gris bleuté clair | 8× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Gris bleuté clair | 1× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Gris bleuté foncé | 16× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Jaune | 7× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Noir | 4× |
| Technic Axle and Pin Connector Angled #4 - 135° | 32192 | Noir | 2× |
| Technic Beam 3 x 5 L-Shape with Quarter Ellipse Thin | 32250 | Gris bleuté foncé | 8× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Noir | 3× |
| Technic Beam 1 x 9 Bent (7 - 3) Thick | 32271 | Gris bleuté clair | 1× |
| Technic Beam 1 x 15 Thick | 32278 | Gris bleuté foncé | 4× |
| Technic Beam 1 x 15 Thick | 32278 | Gris bleuté clair | 6× |
| Technic Beam 1 x 5 Thick | 32316 | Blanc | 5× |
| Technic Beam 1 x 5 Thick | 32316 | Gris bleuté clair | 3× |
| Technic Beam 1 x 5 Thick | 32316 | Gris bleuté foncé | 10× |
| Technic Beam 1 x 7 Bent (4 - 4) Thick | 32348 | Gris bleuté foncé | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Blanc | 5× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Gris bleuté foncé | 4× |
| Technic Gear 36 Tooth Double Bevel | 32498 | Noir | 1× |
| Technic Beam 1 x 3 Thick | 32523 | Jaune | 3× |
| Technic Beam 1 x 3 Thick | 32523 | Noir | 4× |
| Technic Beam 1 x 3 Thick | 32523 | Gris bleuté foncé | 10× |
| Technic Beam 1 x 3 Thick | 32523 | Blanc | 2× |
| Technic Beam 1 x 3 Thick | 32523 | Gris bleuté clair | 4× |
| Technic Beam 1 x 7 Thick | 32524 | Jaune | 2× |
| Technic Beam 1 x 7 Thick | 32524 | Noir | 2× |
| Technic Beam 1 x 7 Thick | 32524 | Blanc | 4× |
| Technic Beam 1 x 7 Thick | 32524 | Gris bleuté clair | 4× |
| Technic Beam 1 x 11 Thick | 32525 | Gris bleuté clair | 1× |
| Technic Beam 1 x 11 Thick | 32525 | Noir | 2× |
| Technic Beam 1 x 11 Thick | 32525 | Blanc | 14× |
| Technic Beam 1 x 11 Thick | 32525 | Gris bleuté foncé | 12× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Blanc | 2× |
| Technic Pin Connector Plate with One Hole (Single on Bottom) | 32529 | Noir | 4× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Gris bleuté foncé | 2× |
| Technic Pin Long without Friction Ridges | 32556 | Beige | 3× |
| Technic Pin Connector Perpendicular Long | 32557 | Gris bleuté clair | 4× |
| Technic Beam 3 x 0.5 Liftarm with Boss and Pin Semi-Reduced | 33299b | Gris bleuté clair | 4× |
| Animal, Frog | 33320 | Or nacré | 1× |
| Plate 1 x 8 | 3460 | Gris bleuté foncé | 6× |
| Plate 1 x 8 | 3460 | Gris bleuté clair | 7× |
| Plate 1 x 3 | 3623 | Gris bleuté foncé | 20× |
| Plate 1 x 3 | 3623 | Gris bleuté clair | 22× |
| Technic Gear 40 Tooth | 3649 | Gris bleuté clair | 1× |
| Brick Arch 1 x 4 | 3659 | Gris bleuté clair | 6× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Gris bleuté clair | 1× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Blanc | 1× |
| Plate 1 x 6 | 3666 | Rouge | 2× |
| Plate 1 x 6 | 3666 | Gris bleuté foncé | 4× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Gris bleuté clair | 24× |
| Slope 65° 2 x 2 x 2 with Bottom Tube | 3678b | Gris bleuté foncé | 4× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Gris bleuté foncé | 8× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Gris bleuté clair | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Gris bleuté foncé | 4× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Gris bleuté clair | 2× |
| Technic Axle 4 | 3705 | Rouge | 9× |
| Technic Axle 4 | 3705 | Noir | 5× |
| Technic Axle 6 | 3706 | Rouge | 2× |
| Technic Axle 6 | 3706 | Noir | 3× |
| Technic Axle 8 | 3707 | Noir | 3× |
| Technic Axle 12 | 3708 | Rouge | 2× |
| Technic Axle 12 | 3708 | Noir | 10× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Blanc | 7× |
| Plate 1 x 4 | 3710 | Rouge | 7× |
| Plate 1 x 4 | 3710 | Gris bleuté clair | 2× |
| Plate 1 x 4 | 3710 | Blanc | 15× |
| Plate 1 x 4 | 3710 | Gris bleuté foncé | 10× |
| Technic Bush | 3713 | Gris bleuté clair | 11× |
| Technic Plate 2 x 8 [7 Holes] | 3738 | Gris bleuté clair | 2× |
| Technic Gear Rack 1 x 4 | 3743 | Gris bleuté clair | 2× |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | 3747b | Gris bleuté foncé | 1× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Beige | 10× |
| Plate 2 x 6 | 3795 | Blanc | 2× |
| Plate 2 x 6 | 3795 | Gris bleuté clair | 5× |
| Plate 2 x 6 | 3795 | Gris bleuté foncé | 1× |
| Plate 2 x 10 | 3832 | Gris bleuté clair | 5× |
| Plate 2 x 10 | 3832 | Blanc | 1× |
| Weapon Axe | 3835 | Noir | 1× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Gris bleuté foncé | 4× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Jaune | 2× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Gris bleuté clair | 4× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Jaune | 5× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Trans-transparent | 13× |
| Cone 2 x 2 x 2, Open Stud | 3942c | Jaune | 1× |
| Dish 4 x 4 Inverted [Radar] | 3960 | Blanc | 1× |
| Dish 4 x 4 Inverted [Radar] | 3960 | Trans-bleu clair | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Azur moyen | 1× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Gris bleuté clair | 13× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Noir | 5× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Blanc | 11× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Jaune | 4× |
| Technic Beam 1 x 9 Thick | 40490 | Gris bleuté foncé | 12× |
| Technic Beam 1 x 9 Thick | 40490 | Gris bleuté clair | 4× |
| Technic Beam 1 x 9 Thick | 40490 | Noir | 4× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Blanc | 1× |
| Plate 8 x 8 | 41539 | Gris bleuté foncé | 1× |
| Tile 1 x 8 with Groove | 4162 | Gris bleuté clair | 5× |
| Tile 1 x 8 with Groove | 4162 | Azur moyen | 4× |
| Technic Beam 1 x 2 Thin | 41677 | Gris bleuté foncé | 5× |
| Technic Axle and Pin Connector Perpendicular Double Split | 41678 | Gris bleuté foncé | 2× |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 42003 | Gris bleuté foncé | 2× |
| String Reel 2 x 4 x 2 Drum | 4208 | Noir | 1× |
| String Reel 2 x 4 x 2 Holder With Open Studs | 4209b | Rouge | 1× |
| Technic Pin 1/2 | 4274 | Noir | 17× |
| Plate 2 x 16 | 4282 | Gris bleuté foncé | 1× |
| Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°] | 4285b | Trans-bleu clair | 1× |
| Slope 33° 3 x 1 | 4286 | Gris bleuté foncé | 3× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Noir | 15× |
| Box 2 x 2 x 2 [Hollow Studs] | 4345b | Rouge | 1× |
| Box 2 x 2 x 2 Door with Slot | 4346 | Gris bleuté clair | 1× |
| Equipment Camera with Side Sight [aka Space Gun] | 4360 | Noir | 1× |
| Technic Beam 1 x 2 Thick | 43857 | Gris bleuté clair | 11× |
| Technic Axle 7 | 44294 | Jaune | 1× |
| Technic Axle 7 | 44294 | Gris bleuté clair | 13× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Gris bleuté clair | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Rouge | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Blanc | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Jaune | 2× |
| Plate 1 x 10 | 4477 | Blanc | 9× |
| Plate Special 1 x 8 with Door Rail | 4510 | Gris bleuté clair | 1× |
| Technic Axle 3 | 4519 | Jaune | 5× |
| Technic Axle 3 | 4519 | Gris bleuté clair | 8× |
| Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs | 45677 | Rouge | 1× |
| Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs and 'HYDRO DYNAMICS COACH' print | 45677pr0007 | Blanc | 4× |
| Windscreen 2 x 4 x 2 Vertical | 4594 | Trans-transparent | 1× |
| Bar 1 x 3 [Clip / Anti-Stud] | 4735 | Noir | 1× |
| Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs | 48092 | Azur moyen | 22× |
| Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs | 48092 | Nougat moyen | 8× |
| Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs | 48092 | Gris bleuté clair | 24× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Gris bleuté clair | 9× |
| Technic Pin Connector Hub Perpendicular 3L with 4 Pins | 48989 | Gris bleuté clair | 2× |
| Slope Curved 3 x 1 No Studs | 50950 | Vert vif | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Trans-bleu foncé | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Trans-rouge | 1× |
| Technic Axle 8 with Stop | 55013 | Gris bleuté foncé | 3× |
| Technic Tread Sprocket Wheel Small 6 Tooth | 57520 | Noir | 2× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Gris bleuté clair | 2× |
| Panel 1 x 6 x 5 | 59349 | Blanc | 1× |
| Panel 1 x 6 x 5 | 59349 | Gris bleuté foncé | 1× |
| Technic Axle 5.5 with Stop [Rounded Short End] | 59426 | Gris bleuté foncé | 3× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Noir | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Gris bleuté clair | 4× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Jaune | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Marron rougeâtre | 9× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Gris bleuté foncé | 12× |
| Cone 1 x 1 [Top Groove] | 59900 | Jaune | 3× |
| Brick Arch 1 x 3 x 2 Curved Top | 6005 | Gris bleuté clair | 4× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Blanc | 1× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Gris bleuté clair | 4× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Orange clair vif | 1× |
| Plate 1 x 12 | 60479 | Gris bleuté clair | 8× |
| Slope 65° 2 x 1 x 2 | 60481 | Gris bleuté foncé | 4× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Noir | 2× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Gris bleuté clair | 1× |
| Technic Axle 9 | 60485 | Gris bleuté clair | 6× |
| Technic Axle 9 | 60485 | Jaune | 1× |
| Door Frame 1 x 4 x 6 Type 2 | 60596 | Noir | 1× |
| Door 1 x 4 x 6 with 4 Panes and Stud Handle | 60623 | Blanc | 1× |
| Brick Curved 2 x 4 x 1 1/3 | 6081 | Gris bleuté clair | 1× |
| Brick Curved 2 x 4 x 1 1/3 | 6081 | Rouge | 1× |
| Equipment Hose Nozzle / Gun with Side String Hole Simplified | 60849 | Gris bleuté clair | 1× |
| Brick 1 x 12 | 6112 | Gris bleuté clair | 6× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Azur moyen | 3× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Or nacré | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Gris bleuté clair | 6× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Noir | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Blanc | 6× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rouge | 2× |
| Brick Arch 1 x 6 x 2 Curved Top | 6183 | Gris bleuté clair | 3× |
| Brick Arch 1 x 6 x 2 Curved Top | 6183 | Blanc | 2× |
| Technic Universal Joint 3L [Complete Assembly] | 61903 | Gris bleuté clair | 6× |
| Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole | 6222 | Gris bleuté clair | 2× |
| Windscreen 3 x 6 x 1 Curved with 2 Circular Stud Holders in Bottom | 62360 | Trans-bleu clair | 2× |
| Technic Pin Connector Round [Slotted] | 62462 | Or nacré | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Vert vif | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Jaune | 10× |
| Technic Pin Connector Round [Slotted] | 62462 | Gris bleuté clair | 7× |
| Technic Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface | 62531 | Jaune | 4× |
| Cylinder Half 2 x 4 x 4 | 6259 | Trans-bleu clair | 10× |
| Tile 1 x 3 | 63864 | Rouge | 1× |
| Tile 1 x 3 | 63864 | Jaune | 5× |
| Technic Axle and Pin Connector Perpendicular Triple | 63869 | Gris bleuté clair | 1× |
| Technic Beam 5 x 11 with 3 x 5 Opening Frame Thick | 64178 | Gris bleuté clair | 2× |
| Technic Beam Frame 5 x 7 with 3 x 5 Opening Thick | 64179 | Gris bleuté clair | 5× |
| Technic Panel 5 x 11 x 1 | 64782 | Gris bleuté clair | 2× |
| Technic Panel 5 x 11 x 1 | 64782 | Gris bleuté clair | 6× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Jaune | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Blanc | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Gris bleuté clair | 3× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Gris bleuté clair | 7× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Gris bleuté foncé | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | 6558 | Noir | 104× |
| Technic Gear 12 Tooth Bevel | 6589 | Beige | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball | 6628 | Noir | 5× |
| Tile 1 x 6 with Groove | 6636 | Gris bleuté clair | 11× |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | 73983 | Jaune | 2× |
| Hose, Ribbed 7mm D. 18L / 14.4cm | 78c18 | Argent mat | 2× |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 85080 | Jaune | 24× |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 85080 | Blanc | 48× |
| Wave / Flame Rounded Large with Marbled Trans-Yellow Pattern | 85959pat0003 | Trans-rouge | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Rouge | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Gris bleuté clair | 18× |
| Tile 2 x 4 with Groove | 87079 | Gris bleuté foncé | 5× |
| Tile 2 x 4 with Groove | 87079 | Rouge | 3× |
| Tile 2 x 4 with Groove | 87079 | Blanc | 1× |
| Technic Panel Fairing #1 Small Smooth Short, Side A | 87080 | Violet foncé | 4× |
| Brick Round 4 x 4 Centre Hole | 87081 | Rouge | 6× |
| Brick Round 4 x 4 Centre Hole | 87081 | Marron rougeâtre | 1× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Gris bleuté clair | 1× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Blanc | 3× |
| Wedge 2 x 2 Facet | 87620 | Gris bleuté clair | 4× |
| Technic Gear Rack 1 x 7 with Axle and Pin Holes | 87761 | Noir | 2× |
| Technic Link Tread Wide with Two Pin Holes, Reinforced | 88323 | Nougat moyen | 12× |
| Technic Link Tread Wide with Two Pin Holes, Reinforced | 88323 | Gris bleuté foncé | 2× |
| Plate 8 x 16 | 92438 | Gris bleuté foncé | 2× |
| Brick Arch 1 x 6 Raised Arch | 92950 | Gris bleuté clair | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Gris bleuté clair | 8× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Gris bleuté clair | 6× |
| Technic Gear 16 Tooth Reinforced [New Style] | 94925 | Gris bleuté clair | 2× |
| Brick and Axle Separator v2.0 | 96874 | Orange | 1× |
| Tile Round 1 x 1 | 98138 | Trans-rouge | 2× |
| Tile Round 1 x 1 | 98138 | Trans-transparent | 2× |
| Brick Special 1 x 2 with Masonry Brick Profile | 98283 | Gris bleuté foncé | 4× |
| Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes | 98585 | Gris bleuté clair | 3× |
| Technic Axle 4 with Centre Stop | 99008 | Beige | 7× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Gris bleuté clair | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Noir | 2× |
ADN du build
Apercu des pieces de HYDRO DYNAMICS Challenge Kit
Avec 2 052 pieces, ce build est a +100% par rapport au set FIRST LEGO League moyen et a +439% par rapport a la sortie moyenne de 2017.
Par rapport au set FIRST LEGO League moyen
Set FIRST LEGO League moyen : 1 027 pieces sur 48 autres sets.
Par rapport au set moyen de 2017
Set moyen de 2017 : 381 pieces sur 450 autres sets.
Profil couleur
Couleur dominante
Gris bleuté clair
Pieces uniques
8.8 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Technic Pin with Friction Ridges Lengthwise and Center Slots
158xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.








![Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6071246.jpg)
