
INTO ORBIT Challenge Kit
🏷️ 45806-1•🎨 FIRST LEGO League•📅 2018•🧱 1910 pièces•Avancé
INTO ORBIT Challenge Kit (45806-1) is a LEGO FIRST LEGO League from 2018. This page uses the available set and theme data until a fuller product description is available.
Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Technic Pin Connector Hub with 2 Perpendicular Axles 10197 | Gris bleuté foncé | 13× |
![]() Technic Gear 8 Tooth [Reinforced] 10928 | Gris bleuté foncé | 6× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Noir | 2× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Blanc | 4× |
![]() Wheel 14mm D. x 9.9mm with Centre Groove, Fake Bolts and 6 Spokes 11208 | Or métallique | 4× |
![]() Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle 11214 | Gris bleuté foncé | 8× |
![]() Plate Special 1 x 2 with Clip Horizontal on Side 11476 | Gris bleuté clair | 4× |
![]() Plate Round 4 x 4 with 2 x 2 Round Opening 11833 | Trans-transparent | 9× |
![]() Plate Round 4 x 4 with 2 x 2 Round Opening 11833 | Trans-Neon Orange | 9× |
![]() Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring 13971 | Noir | 1× |
Affichage de 10 sur 330 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Gris bleuté foncé | 8× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Gris bleuté clair | 4× |
| Plate Round 4 x 4 with 2 x 2 Round Opening | 11833 | Trans-transparent | 9× |
| Plate Round 4 x 4 with 2 x 2 Round Opening | 11833 | Trans-Neon Orange | 9× |
| Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring | 13971 | Noir | 1× |
| Technic Beam 3 x 5 Thick [90° Offset Centre Beam Holes] | 14720 | Gris bleuté clair | 4× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Noir | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Orange | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Jaune | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Gris bleuté clair | 12× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 15100 | Noir | 2× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 15100 | Gris bleuté clair | 4× |
| Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version] | 15254 | Gris bleuté clair | 6× |
| Technic Panel 3 x 11 x 1 | 15458 | Orange | 1× |
| Technic Panel 3 x 11 x 1 | 15458 | Gris bleuté clair | 1× |
| Technic Pin Connector 3L with 2 Pins and Center Hole | 15461 | Noir | 2× |
| Technic Axle 5 with Stop | 15462 | Marron rougeâtre | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Gris bleuté foncé | 10× |
| Tile Round 2 x 2 with Hole | 15535 | Beige | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Gris bleuté foncé | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Blanc | 2× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Blanc | 12× |
| Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 18575 | Beige | 1× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Noir | 2× |
| Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 18653 | Gris bleuté clair | 12× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Blanc | 2× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Noir | 3× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Gris bleuté foncé | 3× |
| Bracket 3 x 2 x 1 1/3 with Pin Bottom | 18671 | Gris bleuté foncé | 8× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Blanc | 1× |
| Technic Turntable Large Type 3 Top, 60 Tooth | 18938 | Noir | 1× |
| Technic Turntable Large Type 3 Base | 18939 | Gris bleuté clair | 1× |
| Technic Gear Rack 1 x 14 x 2 Housing | 18940 | Gris bleuté clair | 1× |
| Technic Gear Rack 1 x 14 x 2 with Axle and Pin Holes | 18942 | Gris bleuté foncé | 1× |
| Technic Gear 16 Tooth with Clutch on Both Sides | 18946 | Rouge | 2× |
| Technic Driving Ring 3L | 18947 | Gris bleuté foncé | 1× |
| Technic Driving Ring Connector | 18948 | Blanc | 1× |
| Plate Round Half 4 x 8 | 22888 | Gris bleuté foncé | 4× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Gris bleuté foncé | 3× |
| Technic Axle 11 | 23948 | Jaune | 2× |
| Technic Axle 11 | 23948 | Gris bleuté clair | 6× |
| Technic Gear Rack 1/4 Circle 11 x 11, 35 Teeth | 24121 | Noir | 2× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Gris bleuté foncé | 8× |
| Tile 1 x 4 with Groove | 2431 | Bleu foncé | 2× |
| Tile 1 x 4 with Groove | 2431 | Gris bleuté foncé | 4× |
| Plate 2 x 12 | 2445 | Gris bleuté clair | 4× |
| Brick 1 x 1 x 5 with Solid Stud | 2453b | Jaune | 1× |
| Tile Special 2 x 2 with Top Pin | 2460 | Noir | 1× |
| Brick 1 x 16 | 2465 | Gris bleuté foncé | 2× |
| Antenna 8H Whip | 2569 | Gris bleuté clair | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-orange | 9× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-Neon Orange | 3× |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | 2780 | Noir | 200× |
| Technic Worm Gear Short | 27938 | Gris bleuté foncé | 1× |
| Zipline, 22L with 2 Connectors - Flexible | 27965 | Argent mat | 7× |
| Technic Wedge Belt Wheel Tire | 2815 | Noir | 7× |
| Brick Special 1 x 2 with Grille | 2877 | Gris bleuté foncé | 4× |
| Lever Small Base with Black Lever | 298c02 | Gris bleuté clair | 1× |
| Brick 2 x 4 | 3001 | Rouge | 1× |
| Brick 2 x 4 | 3001 | Gris bleuté clair | 2× |
| Brick 2 x 4 | 3001 | Gris bleuté foncé | 2× |
| Brick 1 x 8 | 3008 | Gris bleuté clair | 2× |
| Brick 1 x 6 | 3009 | Gris bleuté clair | 6× |
| Brick 1 x 4 | 3010 | Gris bleuté clair | 2× |
| Brick 1 x 4 | 3010 | Gris bleuté foncé | 4× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Gris bleuté clair | 8× |
| Brick 2 x 2 x 3 | 30145 | Gris bleuté clair | 2× |
| Plate 2 x 4 | 3020 | Gris bleuté clair | 22× |
| Plate 2 x 4 | 3020 | Noir | 1× |
| Plate 2 x 4 | 3020 | Noir | 6× |
| Plate 2 x 3 | 3021 | Blanc | 4× |
| Plate 2 x 3 | 3021 | Gris bleuté clair | 6× |
| Plate 2 x 3 | 3021 | Gris bleuté foncé | 14× |
| Plate 1 x 2 | 3023 | Trans-jaune | 3× |
| Plate 1 x 2 | 3023 | Orange | 4× |
| Plate 1 x 2 | 3023 | Trans-rouge | 4× |
| Plate 6 x 16 | 3027 | Gris bleuté foncé | 1× |
| Flag 7 x 3 with Rod | 30292 | Trans-Neon Orange | 2× |
| Flag 7 x 3 with Rod | 30292 | Bleu foncé | 2× |
| Plate 4 x 4 | 3031 | Gris bleuté foncé | 1× |
| Plate 2 x 8 | 3034 | Gris bleuté foncé | 2× |
| Brick Round 2 x 2 Dome Top, Hollow Stud | 30367c | Gris bleuté foncé | 2× |
| Slope 45° 2 x 4 | 3037 | Gris bleuté foncé | 6× |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | 30383 | Gris bleuté clair | 6× |
| Slope 45? 2 x 2 | 3039 | Gris bleuté foncé | 15× |
| Slope 45° 2 x 2 with Complex Control Panel with Red and Green Lamps Print | 3039pr0015 | Noir | 2× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Gris bleuté clair | 8× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Gris bleuté foncé | 9× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Gris bleuté foncé | 1× |
| Panel 4 x 4 x 6 Quarter Cylinder | 30562 | Trans-transparent | 4× |
| Tile 1 x 2 with Groove | 3069b | Noir | 8× |
| Tile 1 x 2 with Broken Arrow Long Yellow with Black Border Print | 3069bpr0206 | Blanc | 2× |
| Tile 1 x 1 with Groove | 3070b | Vert foncé | 4× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Noir | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Gris bleuté clair | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Blanc | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gris bleuté foncé | 20× |
| Technic Beam 1 x 11.5 Double Bent Thick | 32009 | Blanc | 2× |
| Technic Beam 1 x 11.5 Double Bent Thick | 32009 | Gris bleuté foncé | 2× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Gris bleuté clair | 2× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Noir | 6× |
| Technic Axle and Pin Connector Angled #6 - 90° | 32014 | Gris bleuté clair | 2× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Gris bleuté clair | 4× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Noir | 5× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Noir | 2× |
| Technic Axle Connector with Axle Hole | 32039 | Gris bleuté clair | 9× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Gris bleuté clair | 7× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Rouge | 4× |
| Technic Axle 2 Notched | 32062 | Rouge | 21× |
| Technic Axle 2 Notched | 32062 | Noir | 2× |
| Technic Beam 1 x 6 Thin | 32063 | Blanc | 4× |
| Technic Beam 1 x 6 Thin | 32063 | Gris bleuté clair | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Gris bleuté clair | 6× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Gris bleuté foncé | 5× |
| Technic Knob Wheel | 32072 | Noir | 2× |
| Technic Axle 5 | 32073 | Gris bleuté clair | 9× |
| Technic Axle 5 | 32073 | Jaune | 4× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Jaune | 12× |
| Technic Pin Double with Axle Hole | 32138 | Noir | 3× |
| Technic Pin Double with Axle Hole | 32138 | Gris bleuté clair | 3× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Orange | 2× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Gris bleuté clair | 4× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Blanc | 2× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Gris bleuté foncé | 6× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Noir | 8× |
| Technic Axle and Pin Connector Angled #4 - 135° | 32192 | Noir | 1× |
| Technic Gear 20 Tooth Bevel | 32198 | Beige | 1× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Noir | 4× |
| Technic Beam 1 x 15 Thick | 32278 | Noir | 2× |
| Technic Beam 1 x 15 Thick | 32278 | Blanc | 28× |
| Technic Beam 1 x 15 Thick | 32278 | Gris bleuté clair | 1× |
| Technic Axle and Pin Connector Perpendicular Double | 32291 | Gris bleuté clair | 5× |
| Technic Beam 1 x 5 Thick | 32316 | Gris bleuté foncé | 14× |
| Technic Beam 1 x 5 Thick | 32316 | Orange | 3× |
| Technic Beam 1 x 7 Bent (4 - 4) Thick | 32348 | Blanc | 2× |
| Technic Beam 1 x 4 Thin | 32449 | Gris bleuté foncé | 2× |
| Technic Beam 1 x 3 Thick | 32523 | Gris bleuté foncé | 5× |
| Technic Beam 1 x 3 Thick | 32523 | Noir | 4× |
| Technic Beam 1 x 3 Thick | 32523 | Blanc | 9× |
| Technic Beam 1 x 3 Thick | 32523 | Marron rougeâtre | 5× |
| Technic Beam 1 x 3 Thick | 32523 | Gris bleuté clair | 7× |
| Technic Beam 1 x 3 Thick | 32523 | Beige | 5× |
| Technic Beam 1 x 7 Thick | 32524 | Noir | 4× |
| Technic Beam 1 x 7 Thick | 32524 | Blanc | 3× |
| Technic Beam 1 x 7 Thick | 32524 | Noir | 5× |
| Technic Beam 1 x 7 Thick | 32524 | Gris bleuté clair | 2× |
| Technic Beam 1 x 11 Thick | 32525 | Blanc | 5× |
| Technic Beam 1 x 11 Thick | 32525 | Orange | 2× |
| Technic Beam 1 x 11 Thick | 32525 | Violet foncé | 1× |
| Technic Beam 1 x 11 Thick | 32525 | Gris bleuté clair | 22× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Blanc | 8× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Gris bleuté clair | 12× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Gris bleuté foncé | 6× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Gris bleuté clair | 1× |
| Technic Brick 6 x 8 with 4 x 6 Opening | 32532 | Gris bleuté clair | 2× |
| Technic Pin Long without Friction Ridges | 32556 | Beige | 6× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Noir | 1× |
| Slope 33° 3 x 2 | 3298 | Gris bleuté foncé | 15× |
| Technic Beam 3 x 0.5 Liftarm with Boss and Pin Semi-Reduced | 33299b | Noir | 5× |
| Plate 6 x 14 | 3456 | Gris bleuté foncé | 4× |
| Plate 1 x 8 | 3460 | Gris bleuté clair | 3× |
| Slope Inverted 45° 2 x 1 | 3665 | Gris bleuté foncé | 6× |
| Plate 1 x 6 | 3666 | Gris bleuté clair | 13× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Gris bleuté clair | 19× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Noir | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Noir | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Gris bleuté clair | 11× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Blanc | 2× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Gris bleuté clair | 6× |
| Technic Axle 4 | 3705 | Noir | 3× |
| Technic Axle 4 | 3705 | Rouge | 4× |
| Technic Axle 6 | 3706 | Noir | 2× |
| Technic Axle 6 | 3706 | Rouge | 2× |
| Technic Axle 8 | 3707 | Noir | 7× |
| Technic Axle 12 | 3708 | Noir | 5× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Gris bleuté clair | 2× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Noir | 2× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Orange clair vif | 1× |
| Plate 1 x 4 | 3710 | Gris bleuté foncé | 4× |
| Plate 1 x 4 | 3710 | Noir | 4× |
| Plate 1 x 4 | 3710 | Orange | 8× |
| Plate 1 x 4 | 3710 | Gris bleuté clair | 2× |
| Technic Bush | 3713 | Rouge | 3× |
| Technic Bush | 3713 | Gris bleuté clair | 16× |
| Technic Axle 10 | 3737 | Noir | 2× |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | 3747b | Gris bleuté clair | 2× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Beige | 12× |
| Plate 2 x 6 | 3795 | Gris bleuté foncé | 13× |
| Steering Stand 1 x 2 with Black Steering Wheel | 3829c01 | Gris bleuté clair | 1× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Orange | 1× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Trans-transparent | 4× |
| Cone 4 x 4 x 2, Axle Hole [Plain] | 3943b | Blanc | 3× |
| Antenna 1 x 4 with Flat Top | 3957b | Gris bleuté clair | 2× |
| Plate 6 x 6 | 3958 | Blanc | 3× |
| Dish 4 x 4 Inverted [Radar] | 3960 | Gris bleuté clair | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Gris bleuté clair | 12× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Violet foncé | 12× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Noir | 4× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Orange | 5× |
| Technic Beam 1 x 9 Thick | 40490 | Gris bleuté foncé | 6× |
| Technic Beam 1 x 9 Thick | 40490 | Orange | 3× |
| Brick Special 1 x 1 with Headlight | 4070 | Gris bleuté foncé | 6× |
| Technic Beam 1 x 13 Thick | 41239 | Gris bleuté foncé | 10× |
| Technic Beam 1 x 13 Thick | 41239 | Blanc | 10× |
| Technic Beam 1 x 13 Thick | 41239 | Orange | 2× |
| Ball, Hard Plastic, 51mm (approx. 6 studs diameter) | 41250 | Noir | 2× |
| Plate 8 x 8 | 41539 | Gris bleuté foncé | 1× |
| Technic Tooth 1 x 3 with Axle Hole [Rounded Underside] | 41669 | Jaune | 1× |
| Technic Beam 1 x 2 Thin | 41677 | Gris bleuté clair | 14× |
| Technic Axle and Pin Connector Perpendicular Double Split | 41678 | Gris bleuté clair | 3× |
| Technic Axle and Pin Connector Perpendicular Double Split | 41678 | Gris bleuté foncé | 2× |
| Wedge Plate 4 x 2 Right | 41769 | Gris bleuté clair | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Gris bleuté clair | 1× |
| Technic Wedge Belt Wheel [aka Pulley] | 4185 | Blanc | 6× |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 42003 | Gris bleuté foncé | 8× |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 42003 | Gris bleuté clair | 9× |
| Technic Pin 1/2 | 4274 | Noir | 17× |
| Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°] | 4285b | Gris bleuté foncé | 1× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Noir | 38× |
| Box 2 x 2 x 2 [Hollow Studs] | 4345b | Gris bleuté clair | 4× |
| Box 2 x 2 x 2 Door with Slot | 4346 | Trans-transparent | 4× |
| Technic Beam 1 x 2 Thick | 43857 | Gris bleuté clair | 3× |
| Technic Axle 7 | 44294 | Gris bleuté clair | 4× |
| Technic Axle 7 | 44294 | Jaune | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth | 44302a | Gris bleuté clair | 6× |
| Dish 6 x 6 Inverted (Radar) with Solid Studs | 44375b | Gris bleuté clair | 1× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Orange | 10× |
| Flag 4 x 1 Wavy [First Wave Right] | 4495b | Or nacré | 1× |
| Technic Axle 3 | 4519 | Jaune | 8× |
| Technic Axle 3 | 4519 | Gris bleuté clair | 6× |
| Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs and 'INTO ORBIT' and Blue Spaceship Print | 45677pr0009 | Blanc | 4× |
| Bracket 3 x 2 - 2 x 2 [aka Space Seat] | 4598 | Noir | 1× |
| Plate Special 2 x 2 with Wheel Holders | 4600 | Gris bleuté clair | 2× |
| Cone Half 8 x 4 x 6 | 47543 | Trans-transparent | 2× |
| Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs | 48092 | Gris bleuté foncé | 8× |
| Technic Pin Connector Hub Perpendicular 3L with 4 Pins | 48989 | Gris bleuté clair | 12× |
| Wedge Plate 8 x 3, 22° Right | 50304 | Gris bleuté foncé | 1× |
| Wedge Plate 8 x 3, 22° Left | 50305 | Gris bleuté foncé | 1× |
| Technic Axle 32 | 50450 | Noir | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Trans-violet | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Yellowish Green | 3× |
| Technic Pin Connector Hub Perpendicular 3 x 3 Bent with 4 Pins (Pin Ridges Across Part) | 55615 | Gris bleuté clair | 9× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Gris bleuté clair | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Gris bleuté clair | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Rouge | 3× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Orange | 11× |
| Cone 1 x 1 [Top Groove] | 59900 | Blanc | 2× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Gris bleuté clair | 1× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Blanc | 6× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Noir | 10× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Gris bleuté foncé | 2× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Noir | 2× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Blanc | 1× |
| Slope 18° 4 x 1 | 60477 | Gris bleuté foncé | 3× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Gris bleuté clair | 3× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Azur moyen | 2× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Noir | 2× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Orange | 1× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Gris bleuté clair | 2× |
| Technic Axle 9 | 60485 | Gris bleuté clair | 3× |
| Technic Axle 9 | 60485 | Jaune | 2× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Gris bleuté clair | 8× |
| Technic Pin 1/2 with 2L Bar Extension | 61184 | Gris bleuté clair | 4× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Or nacré | 16× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Violet foncé | 23× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Jaune | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Gris bleuté clair | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Or nacré | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Noir | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rouge | 1× |
| Technic Universal Joint 3L [Complete Assembly] | 61903 | Gris bleuté clair | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Blanc | 6× |
| Technic Pin Connector Round [Slotted] | 62462 | Orange | 4× |
| Technic Pin Connector Round [Slotted] | 62462 | Gris bleuté clair | 2× |
| Cylinder Half 2 x 4 x 4 | 6259 | Gris bleuté foncé | 2× |
| Tile 1 x 3 | 63864 | Noir | 8× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Gris bleuté foncé | 2× |
| Technic Axle and Pin Connector Perpendicular Triple | 63869 | Gris bleuté clair | 15× |
| Technic Axle and Pin Connector Perpendicular Triple | 63869 | Noir | 1× |
| Technic Beam Frame 5 x 7 with 3 x 5 Opening Thick | 64179 | Gris bleuté clair | 7× |
| Technic Panel Fairing #13 Large Short Smooth, Side A | 64394 | Blanc | 2× |
| Technic Panel Fairing #14 Large Short Smooth, Side B | 64680 | Blanc | 2× |
| Technic Gear Rack 1 x 13 with Axle and Pin Holes | 64781 | Noir | 2× |
| Technic Panel 5 x 11 x 1 | 64782 | Gris bleuté clair | 2× |
| Technic Panel 5 x 11 x 1 | 64782 | Gris bleuté clair | 4× |
| Technic Panel 5 x 11 x 1 | 64782 | Blanc | 1× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Orange | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Gris bleuté clair | 3× |
| Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | 6558 | Noir | 110× |
| Technic Axle 3 with Stud | 6587 | Beige foncé | 8× |
| Technic Gear 12 Tooth Bevel | 6589 | Beige | 1× |
| Technic Pin with Friction Ridges Lengthwise and Towball | 6628 | Noir | 5× |
| Technic Beam 1 x 9 Bent (6 - 4) Thick | 6629 | Gris bleuté foncé | 6× |
| Technic Beam 1 x 9 Bent (6 - 4) Thick | 6629 | Orange | 2× |
| Technic Beam 1 x 9 Bent (6 - 4) Thick | 6629 | Blanc | 4× |
| Tile 1 x 6 with Groove | 6636 | Gris bleuté foncé | 8× |
| Tile 1 x 6 with Groove | 6636 | Blanc | 9× |
| Technic Changeover Catch - + opening | 6641 | Rouge | 1× |
| Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | 75937 | Pearl Titanium | 4× |
| Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 85080 | Gris bleuté clair | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Orange | 12× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Blanc | 7× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Violet foncé | 9× |
| Brick Round 4 x 4 Centre Hole | 87081 | Rouge | 6× |
| Brick Round 4 x 4 Centre Hole | 87081 | Gris bleuté foncé | 2× |
| Brick Round 4 x 4 Centre Hole | 87081 | Blanc | 1× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Big Squared Pin Holes] | 87082 | Gris bleuté clair | 10× |
| Technic Axle 4 with Stop | 87083 | Gris bleuté foncé | 11× |
| Technic Pin Connector Toggle Joint Smooth Double with Axle and Pin Holes | 87408 | Noir | 1× |
| Cylinder Half 3 x 6 x 6 with 1 x 2 Cutout | 87926 | Gris bleuté clair | 2× |
| Bar 3L | 87994 | Or nacré | 15× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Gris bleuté clair | 2× |
| Technic Axle and Pin Connector Perpendicular Split | 92907 | Gris bleuté clair | 12× |
| Brick Round 2 x 2 [Grill] | 92947 | Noir | 4× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Blanc | 9× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Rouge | 2× |
| Technic Gear 16 Tooth Reinforced [New Style] | 94925 | Gris bleuté clair | 1× |
| Brick and Axle Separator v2.0 | 96874 | Orange | 1× |
| Slope 75° 2 x 2 x 3 [Solid Studs] | 98560 | Gris bleuté foncé | 4× |
| Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes | 98585 | Gris bleuté clair | 1× |
| Technic Axle and Pin Connector Perpendicular Double 4L | 98989 | Gris bleuté clair | 1× |
| Technic Axle 4 with Centre Stop | 99008 | Beige | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Beige | 6× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Noir | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Blanc | 2× |
ADN du build
Apercu des pieces de INTO ORBIT Challenge Kit
Avec 1 910 pieces, ce build est a +85% par rapport au set FIRST LEGO League moyen et a +423% par rapport a la sortie moyenne de 2018.
Par rapport au set FIRST LEGO League moyen
Set FIRST LEGO League moyen : 1 030 pieces sur 48 autres sets.
Par rapport au set moyen de 2018
Set moyen de 2018 : 365 pieces sur 447 autres sets.
Profil couleur
Couleur dominante
Noir
Pieces uniques
8.4 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Technic Pin with Friction Ridges Lengthwise and Center Slots
200xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.

![Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6045938.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6045936.jpg)





