


LEGO NINJAGO 71860-1 Lloyd's Titan Mech 15th Anniversary celebre les 15 ans de LEGO NINJAGO avec une nouvelle version du robot Titan de Lloyd. Lloyd et Grimfax donnent a la scene son duo principal, tandis que la figurine de collection du Maitre de la Glace ajoute un detail d'anniversaire. Cette grande figurine d'action possede ailes, jambes, pieds, bras et epaules articules pour creer des poses de combat ou un modele d'exposition dynamique. Les 3 minifigurines completent le robot anniversaire pour le jeu et la collection.
Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Plate 2 x 6 3795 | Noir | 2× |
![]() Brick Special 1 x 1 with Headlight 4070 | Noir | 8× |
![]() Plate Round 1 x 1 with Solid Stud 6141 | Noir | 4× |
![]() Technic Brick 1 x 2 [2 Pin Holes] 32000 | Noir | 5× |
![]() Slope Inverted 45° 4 x 2 Double 4871 | Noir | 4× |
![]() Plate Special 1 x 2 [Side Handle Closed Ends] 48336 | Noir | 4× |
![]() Plate Round 4 x 4 with Pin Hole 60474 | Noir | 2× |
![]() Slope 30? 1 x 2 x 2/3 85984 | Noir | 4× |
![]() Brick Round 2 x 2 Truncated Cone 98100 | Noir | 1× |
![]() Bracket 1 x 2 - 2 x 2 Inverted 99207 | Noir | 12× |
Affichage de 10 sur 301 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Noir | 4× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Noir | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Noir | 4× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Noir | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Noir | 12× |
| Slope Curved 4 x 1 Inverted | 13547 | Noir | 3× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Noir | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Noir | 2× |
| Plate 3 x 3 Cross | 15397 | Noir | 1× |
| Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 26599 | Noir | 2× |
| WALL DOUBLE CORNER 1X2X1 | 35391 | Noir | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Noir | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Noir | 1× |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 53540 | Noir | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Noir | 8× |
| Tile Special 2 x 3 with 2 Clips without Tab between Clips | 65886 | Noir | 2× |
| Technic Rotation Joint Disk with Pin and Double Rotation Joint Ball Half | 79505 | Noir | 6× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Noir | 1× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Noir | 4× |
| Plate 3 x 3 Corner | 77844 | Noir | 2× |
| PLATE 2X2 W. BALL | 3768 | Noir | 2× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Noir | 1× |
| Bracket 5 x 1 x 1 1/3 | 5712 | Noir | 6× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Noir | 2× |
| Technic Axle 4 | 3705 | Noir | 5× |
| Technic Ball Joint with Through Axle Hole | 53585 | Noir | 8× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Noir | 6× |
| Rubber Technic Tread Attachment | 24375 | Noir | 10× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Noir | 12× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Noir | 6× |
| TECHNIC LEVER 2M | 44862 | Noir | 4× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Noir | 2× |
| Technic Steering Arm 3 x 1 with Towball Socket | 5997 | Noir | 2× |
| Plate 1 x 2 | 3023 | Beige | 15× |
| Brick 2 x 2 | 3003 | Beige | 4× |
| Plate 2 x 4 | 3020 | Beige | 4× |
| ROUND BRICK 1X1 | 3062 | Beige | 2× |
| Brick Special 1 x 1 with Headlight | 4070 | Beige | 6× |
| Plate 1 x 6 | 3666 | Beige | 2× |
| FLAT TILE 2X2 | 3068 | Beige | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Beige | 1× |
| FOOT, PLATE | 18971 | Beige | 1× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Beige | 1× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Beige | 2× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Beige | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Noir | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Noir | 2× |
| ELEMENT SEPARATOR | 31510 | Orange | 1× |
| Brick 1 x 1 | 3005 | Rouge | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Rouge | 2× |
| Plate 4 x 4 | 3031 | Rouge | 3× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Rouge | 6× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Rouge | 2× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Rouge | 5× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Rouge | 4× |
| Tile Round 1 x 2 Half Circle | 1748 | Rouge | 4× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Rouge | 4× |
| Technic Axle 2 Notched | 32062 | Rouge | 21× |
| Technic Axle 6 | 3706 | Rouge | 2× |
| BUSH FOR CROSS AXLE | 42798 | Rouge | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Rouge | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Rouge | 1× |
| TECHNIC LEVER 2M | 44862 | Rouge | 4× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Rouge | 1× |
| MINI HEAD, NO. 2255 | 33869 | Jaune | 1× |
| Brick 2 x 2 | 3003 | Vert sable | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Vert sable | 3× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Gris bleuté foncé | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gris bleuté foncé | 2× |
| FLAT TILE 1X1 | 3070 | Gris bleuté foncé | 8× |
| Plate 2 x 3 | 3021 | Gris bleuté foncé | 4× |
| Plate 2 x 4 | 3020 | Gris bleuté foncé | 4× |
| Slope Inverted 45° 2 x 1 | 3665 | Gris bleuté foncé | 4× |
| Brick 2 x 3 | 3002 | Gris bleuté foncé | 4× |
| Plate 1 x 3 | 3623 | Gris bleuté foncé | 6× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Gris bleuté foncé | 1× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Gris bleuté foncé | 7× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Gris bleuté foncé | 2× |
| BRICK 2X2 W/ BALL Ø 10.2 | 57909 | Gris bleuté foncé | 4× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Gris bleuté foncé | 12× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Gris bleuté foncé | 6× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Gris bleuté foncé | 4× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Gris bleuté foncé | 18× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Gris bleuté foncé | 6× |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Gris bleuté foncé | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Gris bleuté foncé | 8× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Gris bleuté foncé | 2× |
| STICK 6M W/FLANGE | 28921 | Gris bleuté foncé | 1× |
| Slope Inverted 45° 4 x 1 Double with 1 x 2 Recessed | 32802 | Gris bleuté foncé | 2× |
| Tile 2 x 3 | 26603 | Gris bleuté foncé | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Gris bleuté foncé | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Gris bleuté foncé | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Gris bleuté foncé | 12× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Gris bleuté foncé | 7× |
| PLATE 1X2 W/STUB/ALONG/UPPER P | 53922 | Gris bleuté foncé | 1× |
| BAD ROBOT ARM | 49753 | Gris bleuté foncé | 4× |
| FLAT TILE 1X1, ROUND | 35381 | Gris bleuté foncé | 4× |
| FLAT TILE 1X2, NO. 276 | 66894 | Gris bleuté foncé | 2× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Gris bleuté foncé | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Gris bleuté foncé | 3× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Gris bleuté foncé | 8× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Gris bleuté foncé | 2× |
| 3.2 SHAFT W/ 5.9 BALL | 67692 | Gris bleuté foncé | 1× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Gris bleuté foncé | 6× |
| Brick Special 1 x 2 x 1 1/3 with Rotation Joint Socket | 80431 | Gris bleuté foncé | 3× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Gris bleuté foncé | 4× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Gris bleuté foncé | 7× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Gris bleuté foncé | 2× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Gris bleuté foncé | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Gris bleuté foncé | 2× |
| Technic Cam | 6575 | Gris bleuté foncé | 4× |
| Technic Beam 1 x 2 with Ball Joint Angled | 50923 | Gris bleuté foncé | 6× |
| Technic Axle 8 with Stop | 55013 | Gris bleuté foncé | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Gris bleuté foncé | 1× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Gris bleuté foncé | 1× |
| DOUBLE CROSS BLOCK | 42142 | Gris bleuté foncé | 2× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Gris bleuté foncé | 6× |
| Rotation Joint Socket with 2 Pins | 80563 | Gris bleuté foncé | 6× |
| Technic Pin 1/2 with Friction | 89678 | Gris bleuté foncé | 2× |
| Plate 2 x 2 | 3022 | Noir | 1× |
| Brick 1 x 1 | 3005 | Gris bleuté clair | 9× |
| Plate 2 x 3 | 3021 | Gris bleuté clair | 16× |
| Plate 2 x 8 | 3034 | Gris bleuté clair | 4× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Gris bleuté clair | 4× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Gris bleuté clair | 4× |
| Plate 1 x 4 | 3710 | Gris bleuté clair | 6× |
| Brick Special 1 x 2 x 2/3 with Studs on Sides | 4595 | Gris bleuté clair | 1× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Gris bleuté clair | 1× |
| Plate 4 x 4 | 3031 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Gris bleuté clair | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Gris bleuté clair | 4× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Gris bleuté clair | 1× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Gris bleuté clair | 4× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Gris bleuté clair | 1× |
| BRICK 1X1 W. HANDLE | 28917 | Gris bleuté clair | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Gris bleuté clair | 8× |
| FLAT TILE 1X1, ROUND | 35381 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Gris bleuté clair | 2× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Gris bleuté clair | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Gris bleuté clair | 4× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Gris bleuté clair | 16× |
| Plate 1 x 5 | 78329 | Gris bleuté clair | 2× |
| Plate 2 x 3 with 1 x 1 Cutout | 73831 | Gris bleuté clair | 4× |
| Brick Round 4 x 4 Dome Top with Round 2 x 2 Recessed, 4 Studs | 79850 | Gris bleuté clair | 4× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Gris bleuté clair | 1× |
| WEAPON BARREL | 31511 | Gris bleuté clair | 2× |
| 1/2 BUSH | 42136 | Gris bleuté clair | 6× |
| CROSS BLOCK/FORM 2X2X2 | 42193 | Gris bleuté clair | 5× |
| TECHNIC LEVER 2M | 44862 | Gris bleuté clair | 1× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Gris bleuté clair | 2× |
| Technic Axle 3 with Stop | 24316 | Marron rougeâtre | 2× |
| Technic Axle 5 with Stop | 15462 | Marron rougeâtre | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Noir | 7× |
| Plate 1 x 2 | 3023 | Noir | 29× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Noir | 8× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Noir | 4× |
| Slope 45? 2 x 2 | 3039 | Noir | 8× |
| ROOF TILE 1X2/45° | 3040 | Noir | 7× |
| Plate 1 x 6 | 3666 | Noir | 2× |
| Plate 1 x 4 | 3710 | Noir | 10× |
| Plate 2 x 3 | 3021 | Noir | 4× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Noir | 5× |
| Tile 1 x 3 | 63864 | Noir | 13× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Noir | 9× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Noir | 9× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Noir | 2× |
| Plate 2 x 4 | 3020 | Noir | 8× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Noir | 14× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Noir | 8× |
| Tile Round 1 x 1 Quarter | 25269 | Noir | 6× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Noir | 10× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Noir | 2× |
| TILE 4X4, W/ BOW, NO. 5 | 3477 | Noir | 8× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Noir | 4× |
| MOP HEAD NO. 1 | 7722 | Noir | 1× |
| Plate 2 x 2 Corner | 2420 | Beige foncé | 16× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Beige foncé | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Beige foncé | 8× |
| CROSSAXLE 3M WITH KNOB | 13670 | Beige foncé | 2× |
| AXE HEAD W HOLE Ø 3.2 | 79805 | Silver Metallic | 2× |
| Fric. element, cylinder | 65443 | Silver Metallic | 2× |
| Plate Round 1 x 1 with Hollow Stud and Bar on Underside - Long Space | 79194 | Trans-transparent | 1× |
| ROCK CRYSTAL, TRANSPARENT | 28623 | Trans-vert néon | 1× |
| PYRAMID RIDGED TILE 1X1X2/3 | 35343 | Trans-vert néon | 2× |
| Radiator Grille 1x2 | 2412 | Medium Lime | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Jaune | 6× |
| Cone 1 x 1 [Top Groove] | 59900 | Jaune | 4× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Jaune | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Jaune | 4× |
| Brick Special 1 x 1 with Scroll with Open Stud | 20310 | Or nacré | 2× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Citron vert | 2× |
| FROG | 28841 | Medium Lime | 1× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Medium Lime | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Medium Lime | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Jaune | 2× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Jaune | 12× |
| Plate 1 x 2 | 3023 | Jaune | 2× |
| Weapon Sword Hilt with Dragon Head | 36017 | Or nacré | 2× |
| BAD ROBOT ARM | 49753 | Medium Lime | 6× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Medium Lime | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Or nacré | 1× |
| Fin Jagged with Axle Hole | 76919 | Or nacré | 3× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Medium Lime | 3× |
| Plate 2 x 2 | 3022 | Jaune | 6× |
| Brick Round Corner 3 x 3 x 1 No Studs | 65617 | Jaune | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Orange clair vif | 2× |
| PLATE W. BOWS 2X1½ | 81300 | Medium Lime | 4× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Jaune | 6× |
| MINI HAT, NO. 19 | 3616 | Medium Lime | 6× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Jaune | 8× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Or nacré | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Jaune | 12× |
| Chain 2L with Bars | 6981 | Or nacré | 1× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Jaune | 2× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Medium Lime | 1× |
| T-PIECE | 4697 | Medium Lime | 2× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Citron vert | 1× |
| Wedge Plate 3 x 6 Cut Corners | 2419 | Blanc | 2× |
| Tile 1 x 4 with Groove | 2431 | Blanc | 3× |
| FLAT TILE 1X2 | 3069 | Blanc | 4× |
| Plate 1 x 3 | 3623 | Blanc | 1× |
| Slope Inverted 45° 2 x 1 | 3665 | Blanc | 1× |
| Plate 1 x 6 | 3666 | Blanc | 8× |
| Plate 2 x 10 | 3832 | Blanc | 2× |
| PLATE 2X2 ROUND | 4032 | Blanc | 4× |
| ROOF TILE 1X3/25° INV. | 4287 | Blanc | 4× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Blanc | 2× |
| ROOF TILE 1X2/45° | 3040 | Blanc | 2× |
| Wedge Plate 6 x 12 Right | 30356 | Blanc | 1× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Blanc | 2× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Blanc | 4× |
| BRICK 2X6 | 44237 | Blanc | 2× |
| Slope Curved 3 x 1 No Studs | 50950 | Blanc | 3× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Blanc | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Blanc | 5× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Blanc | 4× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Blanc | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Blanc | 7× |
| Slope Curved 4 x 1 Inverted | 13547 | Blanc | 4× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Blanc | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Blanc | 10× |
| Wedge Sloped 45° 2 x 2 Corner | 13548 | Blanc | 4× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Blanc | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Blanc | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Blanc | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Blanc | 4× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Blanc | 6× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Blanc | 2× |
| Plate 3 x 3 | 11212 | Blanc | 4× |
| Plate Round 6 x 6 with Hole | 11213 | Blanc | 4× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Blanc | 6× |
| Wedge Plate 2 x 2 Left | 24299 | Blanc | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Blanc | 2× |
| Panel 1 x 3 x 1 | 23950 | Blanc | 8× |
| ANGLE PLATE 1X2 / 2X4 | 21731 | Blanc | 8× |
| Slope Curved 2 x 1 Inverted | 24201 | Blanc | 1× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Blanc | 6× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Blanc | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Blanc | 6× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Blanc | 6× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Blanc | 3× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Blanc | 3× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Blanc | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Blanc | 6× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Blanc | 4× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Blanc | 10× |
| LAMP HOLDER | 41632 | Blanc | 1× |
| Slope Double 45° 1 x 1 | 35464 | Blanc | 1× |
| Brick Round Corner 3 x 3 x 1 No Studs | 65617 | Blanc | 16× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Blanc | 4× |
| PLATE 1X2 W. 1 HORIZONTAL SNAP | 65458 | Blanc | 8× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Blanc | 2× |
| Wedge Plate 2 x 4 27° Right | 65426 | Blanc | 2× |
| Wedge Plate 2 x 4 27° Left | 65429 | Blanc | 2× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Blanc | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Blanc | 6× |
| PLATE W. BOWS 2X1½ | 81300 | Blanc | 2× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Blanc | 1× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Blanc | 1× |
| Slope Curved 4 x 3 with 3 Layers, 1 x 3 Cutout on Underside | 66955 | Blanc | 4× |
| Wedge Plate 8 x 3, 8° Left | 3544 | Blanc | 2× |
| Wedge Plate 8 x 3, 8° Right | 3545 | Blanc | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Blanc | 1× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Blanc | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Blanc | 6× |
| Brick Special 1 x 2 with Rotation Joint Pin | 4920 | Blanc | 3× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Blanc | 4× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Blanc | 4× |
| Wedge Curved 6 x 2 Right, Smooth Inner Walls | 5711 | Blanc | 2× |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots] | 53923 | Blanc | 1× |
| LEFT WING 6X12 | 3632 | Blanc | 1× |
| Technic Axle Pin 3L without Friction Ridges and 2L Axle | 65249 | Blanc | 2× |
| ANGLE ELEMENT, 0 DEGREES [1] | 42127 | Blanc | 2× |
| Technic Pin Connector Hub with 2 Perpendicular Axles | 10197 | Blanc | 2× |
ADN du build
Apercu des pieces de Lloyd's Titan Mech 15th Anniversary
Avec 1 293 pieces, ce build est a +183% par rapport au set Ninjago moyen et a +107% par rapport a la sortie moyenne de 2026.
Par rapport au set Ninjago moyen
Set Ninjago moyen : 457 pieces sur 408 autres sets.
Par rapport au set moyen de 2026
Set moyen de 2026 : 626 pieces sur 427 autres sets.
Profil couleur
Couleur dominante
Noir
Pieces uniques
5.4 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Plate 1 x 2
46xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.



![Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/3200026.jpg)

![Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg)



