


LEGO NINJAGO 71872-1 Ultra Dragon Battle recrée le combat final de l'histoire NINJAGO Legends Duskfall. Le modele oppose un dragon a 4 tetes au serpent Devourer surgissant du sol. Le dragon peut etre retire de la base, avec tetes, cous, machoires, queue et ailes articulés. Jin, Mira, Nate et un general Oni completent la scene.
Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Plate 2 x 2 Corner 2420 | Noir | 2× |
![]() Tile 1 x 4 with Groove 2431 | Noir | 4× |
![]() Brick 2 x 4 3001 | Noir | 2× |
![]() Brick 2 x 3 3002 | Noir | 1× |
![]() Brick 2 x 2 3003 | Noir | 1× |
![]() Brick 1 x 2 3004 | Noir | 1× |
![]() Brick 1 x 1 3005 | Noir | 2× |
![]() Brick 1 x 4 3010 | Noir | 2× |
![]() Plate 2 x 4 3020 | Noir | 6× |
![]() Plate 2 x 8 3034 | Noir | 1× |
Affichage de 10 sur 558 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Brick 1 x 2 | 3004 | Noir | 1× |
| Brick 1 x 1 | 3005 | Noir | 2× |
| Brick 1 x 4 | 3010 | Noir | 2× |
| Plate 2 x 4 | 3020 | Noir | 6× |
| Plate 2 x 8 | 3034 | Noir | 1× |
| Plate 4 x 8 | 3035 | Noir | 1× |
| FLAT TILE 2X2 | 3068 | Noir | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Noir | 1× |
| Brick 1 x 3 | 3622 | Noir | 4× |
| Plate 1 x 3 | 3623 | Noir | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Noir | 2× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Noir | 2× |
| Plate 1 x 4 | 3710 | Noir | 2× |
| PLATE 2X2 ROUND | 4032 | Noir | 1× |
| Plate 1 x 10 | 4477 | Noir | 4× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Noir | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Noir | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Noir | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Noir | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Noir | 2× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Noir | 4× |
| Plate Round Corner 3 x 3 | 30357 | Noir | 2× |
| Slope Curved 3 x 1 No Studs | 50950 | Noir | 4× |
| Wedge Plate 8 x 3, 22° Right | 50304 | Noir | 1× |
| Wedge Plate 8 x 3, 22° Left | 50305 | Noir | 1× |
| Plate Special 1 x 1 with Tooth | 49668 | Noir | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Noir | 4× |
| Slope 18° 4 x 1 | 60477 | Noir | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Noir | 1× |
| Tile 2 x 4 with Groove | 87079 | Noir | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Noir | 2× |
| Plate Special 1 x 2 with Angled Handles on Side | 92692 | Noir | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Noir | 1× |
| Slope Curved 4 x 2 No Studs | 93606 | Noir | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Noir | 33× |
| Wedge Curved 4 x 3 No Studs [Plain] | 64225 | Noir | 1× |
| Tile Special 2 x 2 Inverted | 11203 | Noir | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Noir | 10× |
| BRICK 2X8 | 93888 | Noir | 1× |
| Slope Curved 4 x 1 Inverted | 13547 | Noir | 16× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Noir | 4× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Noir | 12× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Noir | 3× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Noir | 6× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Noir | 2× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Noir | 2× |
| ANGLE PLATE 1X2 / 2X4 | 21731 | Noir | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Noir | 1× |
| Slope Curved 2 x 1 Inverted | 24201 | Noir | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Noir | 7× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Noir | 4× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Noir | 2× |
| ANG.BRICK 5X5, Ø4,85 | 28973 | Noir | 4× |
| Tile Round 1 x 1 Quarter | 25269 | Noir | 4× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Noir | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Noir | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Noir | 4× |
| Weapon Harpoon [Smooth Shaft] | 18041 | Noir | 4× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Noir | 10× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Noir | 3× |
| Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Top | 43045 | Noir | 1× |
| PLATE 1X2 W. STUB/VERTICAL | 49716 | Noir | 4× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Noir | 10× |
| PLATE 4X4 W/ANGLE | 41822 | Noir | 2× |
| BAD ROBOT ARM | 49753 | Noir | 6× |
| LAMP HOLDER | 41632 | Noir | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Noir | 4× |
| Slope Curved 4 x 3 with 3 Layers, 1 x 3 Cutout on Underside | 66955 | Noir | 1× |
| BRICK 2X2 Ø4.85 VERTIC. SNAP | 48454 | Noir | 3× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Noir | 1× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Noir | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Noir | 4× |
| Weapon Hilt Symmetric | 66909 | Noir | 1× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Noir | 4× |
| Wedge Plate 6 x 2 Left | 78443 | Noir | 1× |
| Wedge Plate 6 x 2 Right | 78444 | Noir | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Noir | 6× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Noir | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Noir | 22× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Noir | 3× |
| Plate Special 1 x 2 with 2 End Towballs | 3170 | Noir | 1× |
| Animal Body Part, Horn Stacked 45 deg. with Axle Connectors | 2142 | Noir | 1× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Noir | 3× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Noir | 4× |
| ROOF TILE 3X4/25 DEG. | 3016 | Noir | 8× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Noir | 2× |
| Plate 3 x 3 Corner | 77844 | Noir | 2× |
| Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout | 58846 | Noir | 4× |
| BRICK 4X6, W/ 4.85 HOLE, CUT OUT | 1679 | Noir | 1× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Noir | 2× |
| Wedge Curved 6 x 2 Right, Smooth Inner Walls | 5711 | Noir | 1× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Noir | 5× |
| Hat Conical Asian with Raised Center | 26007 | Noir | 1× |
| Bracket 5 x 2 x 1 1/3 with Bottom Stud Holder | 79180 | Noir | 1× |
| Slope Curved 3 x 1 x 2/3 | 7302 | Noir | 2× |
| Slope 30° 1 x 1 x 2/3 Double Corner | 7826 | Noir | 6× |
| Brick Round Curved 1 x 1 x 1 Quarter Dome | 5848 | Noir | 2× |
| BRICK 4X6 W/ BOW, W/ ANGLE | 8132 | Pearl Very Light Gray | 1× |
| Technic Axle 4 | 3705 | Noir | 10× |
| Technic Axle 10 | 3737 | Noir | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Noir | 4× |
| Technic Axle 2 Notched | 32062 | Noir | 3× |
| Technic Ball Joint with Through Axle Hole | 53585 | Noir | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Noir | 6× |
| Technic Panel Fairing #14 Large Short Smooth, Side B | 64680 | Noir | 1× |
| Technic Panel Fairing #13 Large Short Smooth, Side A | 64394 | Noir | 1× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Noir | 2× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Noir | 2× |
| ANGLE ELEMENT, 157,5 DEGR. [3] | 42128 | Noir | 8× |
| ANGLE ELEMENT, 112,5 DEGR. [5] | 41488 | Noir | 2× |
| CROSS BLOCK 3M | 42796 | Noir | 2× |
| CROSS BLOCK/FORM 2X2X2 | 42193 | Noir | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Noir | 29× |
| Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 48267 | Noir | 4× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Noir | 4× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Noir | 12× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Noir | 4× |
| Technic Panel Triangle 5 x 4 Right | 80274 | Noir | 1× |
| Technic Panel Triangle 5 x 4 Left | 80278 | Noir | 1× |
| 3 BRANCH CROSSHOLE W. HOLE | 49155 | Noir | 4× |
| Technic Axle and Pin Connector Angled #7 - 168.75° | 4450 | Noir | 2× |
| Brick 1 x 4 | 3010 | Beige | 2× |
| Plate 4 x 6 | 3032 | Beige | 1× |
| Plate 2 x 2 | 3022 | Beige | 2× |
| ROUND BRICK 1X1 | 3062 | Beige | 2× |
| Plate 2 x 3 | 3021 | Beige | 3× |
| BRICK Ø16 W. CROSS | 6143 | Beige | 1× |
| PLATE 2X2 ROUND | 4032 | Beige | 5× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Beige | 4× |
| Plate 4 x 4 | 3031 | Beige | 4× |
| Brick Arch 1 x 4 | 3659 | Beige | 3× |
| Plate 16 x 16 | 91405 | Beige | 1× |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 15208 | Beige | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Beige | 3× |
| Horn with Shaft | 88513 | Beige | 4× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Beige | 2× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Beige | 2× |
| Tile 2 x 6 | 69729 | Beige | 2× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Beige | 8× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Beige | 2× |
| Turntable 2 x 2 Plate, Base | 3680 | Beige | 1× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Beige | 1× |
| Technic Ball Joint with Through Axle Hole | 53585 | Beige | 2× |
| Brick 1 x 8 | 3008 | Bleu foncé | 3× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Noir | 6× |
| ELEMENT SEPARATOR | 31510 | Orange | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Orange | 8× |
| Brick 1 x 4 | 3010 | Rouge | 1× |
| FLAT TILE 2X2 | 3068 | Rouge | 1× |
| Plate 2 x 16 | 4282 | Rouge | 8× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rouge | 14× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Rouge | 2× |
| ANGLE PLATE 1X2 / 2X4 | 21731 | Rouge | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Rouge | 5× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Rouge | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Rouge | 4× |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | 13564 | Rouge | 1× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Rouge | 4× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Rouge | 1× |
| Plate 3 x 3 Corner | 77844 | Rouge | 4× |
| Plate Special 1 x 1 with Hole Through Stud, 3 Bars and 3 Bar Holes | 1941 | Rouge | 2× |
| Technic Axle 2 Notched | 32062 | Rouge | 19× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Rouge | 2× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Rouge | 2× |
| Technic Axle 4 | 3705 | Rouge | 2× |
| Technic Axle 6 | 3706 | Rouge | 1× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Rouge | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rouge | 4× |
| Technic Pin 1/2 with Friction | 89678 | Rouge | 8× |
| Plate 1 x 8 | 3460 | Jaune | 1× |
| Plate 2 x 6 | 3795 | Jaune | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Jaune | 4× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Jaune | 4× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Jaune | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Jaune | 2× |
| Brick 2 x 4 | 3001 | Citron vert | 3× |
| Brick 1 x 3 | 3622 | Citron vert | 10× |
| Plate 1 x 4 | 3710 | Citron vert | 4× |
| Plate 1 x 3 | 3623 | Citron vert | 3× |
| Plate 4 x 4 | 3031 | Citron vert | 3× |
| ROOF TILE 1X2/45° | 3040 | Citron vert | 4× |
| Plate 2 x 4 | 3020 | Citron vert | 3× |
| Plate 2 x 6 | 3795 | Citron vert | 2× |
| Slope 45? 2 x 2 | 3039 | Citron vert | 2× |
| Plate 2 x 3 | 3021 | Citron vert | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Citron vert | 10× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Citron vert | 4× |
| PLATE 2X2 ROUND | 4032 | Citron vert | 13× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Citron vert | 2× |
| ANGLE ELEMENT, 0 DEGREES [1] | 42127 | Citron vert | 2× |
| Equipment Candlestick | 37762 | Beige | 2× |
| Brick Curved 2 x 3 | 6215 | Gris bleuté clair | 2× |
| Plate 2 x 2 Corner | 2420 | Argent métallique | 5× |
| Wedge Plate 3 x 2 Left | 43723 | Gris bleuté clair | 3× |
| Wedge Plate 3 x 2 Right | 43722 | Gris bleuté clair | 3× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Gris bleuté clair | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Gris bleuté clair | 3× |
| Wedge Plate 2 x 2 Left | 24299 | Gris bleuté clair | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Gris bleuté clair | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Gris bleuté clair | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Gris bleuté clair | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Gris bleuté clair | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Gris bleuté clair | 2× |
| Plate 2 x 10 | 3832 | Gris bleuté foncé | 4× |
| Wedge Plate 3 x 2 Right | 43722 | Gris bleuté foncé | 3× |
| Wedge Plate 3 x 2 Left | 43723 | Gris bleuté foncé | 3× |
| Plate 2 x 8 | 3034 | Gris bleuté foncé | 1× |
| Tile 1 x 4 with Groove | 2431 | Gris bleuté foncé | 2× |
| Slope 45? 2 x 2 | 3039 | Gris bleuté foncé | 1× |
| Plate 1 x 6 | 3666 | Gris bleuté foncé | 3× |
| ROUND BRICK 1X1 | 3062 | Gris bleuté foncé | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Gris bleuté foncé | 4× |
| Wedge Plate 6 x 3 Left | 54384 | Gris bleuté foncé | 1× |
| Wedge Plate 6 x 3 Right | 54383 | Gris bleuté foncé | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Gris bleuté foncé | 7× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Gris bleuté foncé | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Gris bleuté foncé | 2× |
| Plate Special 1 x 2 with End Towball | 22890 | Gris bleuté foncé | 12× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Gris bleuté foncé | 2× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Gris bleuté foncé | 4× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Gris bleuté foncé | 1× |
| Tile 2 x 3 | 26603 | Gris bleuté foncé | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Gris bleuté foncé | 3× |
| Plate Special / Shield Rectangular with 4 Studs, Handle | 30166 | Gris bleuté foncé | 1× |
| PLATE 1X2 W. STUB/VERTICAL | 49716 | Gris bleuté foncé | 4× |
| BRICK 2X2 Ø4.85 FEMALE | 48370 | Gris bleuté foncé | 2× |
| PLATE 1X1 W. HOLDER | 44860 | Gris bleuté foncé | 1× |
| Weapon Hilt Symmetric | 66909 | Gris bleuté foncé | 1× |
| PLATE 2X4/2X2X1 W. VERTICAL SN | 42194 | Gris bleuté foncé | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Gris bleuté foncé | 5× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Gris bleuté foncé | 2× |
| Brick Special 1 x 2 x 1 1/3 with Rotation Joint Socket | 80431 | Gris bleuté foncé | 4× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Gris bleuté foncé | 2× |
| Plate 2x2 w. stump/top | 53968 | Gris bleuté foncé | 1× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Gris bleuté foncé | 2× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Gris bleuté foncé | 2× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 2 Sides | 80796 | Gris bleuté foncé | 2× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Gris bleuté foncé | 1× |
| Technic Beam 1 x 2 with Ball Joint Angled | 50923 | Gris bleuté foncé | 2× |
| Rotation Joint Socket with 2 Pins | 80563 | Gris bleuté foncé | 2× |
| Technic Pin 1/2 with Friction | 89678 | Gris bleuté foncé | 8× |
| Brick 1 x 4 | 3010 | Noir | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Noir | 12× |
| Brick 1 x 1 | 3005 | Noir | 2× |
| Plate 2 x 4 | 3020 | Noir | 9× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Noir | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Noir | 10× |
| Slope 33° 3 x 1 | 4286 | Noir | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Noir | 10× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Noir | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Noir | 2× |
| Plate 2 x 6 | 3795 | Noir | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Noir | 1× |
| Tile Round 1 x 1 Quarter | 25269 | Noir | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Noir | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Noir | 3× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Noir | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Noir | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Noir | 6× |
| Windscreen 6 x 4 x 1 Hexagonal with Handle | 27262 | Noir | 2× |
| PLATE 1x2 W. HORIZONTAL HOLE Ø4,85 REV. | 28809 | Noir | 1× |
| Tile Special 1 x 2 with Two Vertical Teeth / Tooth | 15209 | Noir | 6× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Noir | 10× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Noir | 6× |
| Tile Round 2 x 2 Half Circle | 5520 | Noir | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Noir | 7× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Noir | 10× |
| Plate 4 x 4 | 3031 | Noir | 1× |
| BRICK Ø16 W. CROSS | 6143 | Medium Azur | 1× |
| Plate 2 x 3 | 3021 | Noir | 2× |
| Plate 1 x 2 | 3023 | Noir | 4× |
| Plate 1 x 3 | 3623 | Noir | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Noir | 6× |
| Brick 1 x 1 | 3005 | Noir | 2× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Noir | 14× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Noir | 3× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Noir | 4× |
| RIGHT PANEL 2X5 (N0 21) | 43499 | Noir | 1× |
| LEFT PANEL 2X5 (NR 22) | 43500 | Noir | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Argent métallique | 3× |
| Tile Round 1 x 2 | 1126 | Gris bleuté clair | 7× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Gris bleuté clair | 5× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Gris bleuté clair | 5× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Gris bleuté clair | 2× |
| Plate 1 x 2 | 3023 | Gris bleuté clair | 6× |
| Plate 1 x 1 | 3024 | Gris bleuté clair | 4× |
| FLAT TILE 1X1 | 3070 | Gris bleuté clair | 6× |
| Plate 1 x 3 | 3623 | Gris bleuté clair | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Gris bleuté clair | 5× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Gris bleuté clair | 2× |
| PLATE 2X2 ROUND | 4032 | Gris bleuté clair | 4× |
| Brick Special 1 x 2 x 2/3 with Studs on Sides | 4595 | Gris bleuté clair | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gris bleuté clair | 2× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Gris bleuté clair | 1× |
| BRICK 2X6 | 44237 | Gris bleuté clair | 6× |
| Slope 45° 2 x 2 Double Convex | 3045 | Gris bleuté clair | 5× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Gris bleuté clair | 2× |
| Turntable 2 x 2 Plate - Top | 3679 | Gris bleuté clair | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Gris bleuté clair | 3× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Gris bleuté clair | 2× |
| Slope 18° 4 x 1 | 60477 | Gris bleuté clair | 3× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Gris bleuté clair | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Gris bleuté clair | 10× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Gris bleuté clair | 6× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Gris bleuté clair | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Gris bleuté clair | 2× |
| PLATE 2X2 W 1 KNOB | 23893 | Gris bleuté clair | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Gris bleuté clair | 4× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Gris bleuté clair | 11× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Gris bleuté clair | 1× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Gris bleuté clair | 3× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Gris bleuté clair | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Gris bleuté clair | 8× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Gris bleuté clair | 2× |
| FLAT TILE 1X1, ROUND | 35381 | Gris bleuté clair | 2× |
| Wedge Sloped 18° 4 x 4 Corner | 43708 | Gris bleuté clair | 3× |
| Wedge Sloped 45° 3 x 3 Left | 42862 | Gris bleuté clair | 3× |
| Wedge Sloped 45° 3 x 3 Right | 48165 | Gris bleuté clair | 3× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Gris bleuté clair | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Gris bleuté clair | 10× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Gris bleuté clair | 8× |
| 3 w.arch w.knob and shaft ø3.2 | 42456 | Gris bleuté clair | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Gris bleuté clair | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Gris bleuté clair | 3× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Gris bleuté clair | 17× |
| Wedge Sloped 2 x 5 Right | 3505 | Gris bleuté clair | 1× |
| Wedge Sloped 2 x 5 Left | 3504 | Gris bleuté clair | 1× |
| Slope Curved 1 x 4 with Stud Notch Right | 5414 | Gris bleuté clair | 2× |
| Slope Curved 1 x 4 with Stud Notch Left | 5415 | Gris bleuté clair | 2× |
| Technic Pin Long 3l, No Friction Ridges, with Stop and Hole | 77765 | Gris bleuté clair | 2× |
| Technic Pin Connector Hub with 3L Axle | 5713 | Gris bleuté clair | 2× |
| Rotation Joint Disc with 2 Pins | 6991 | Gris bleuté clair | 2× |
| MINI ARMOUR, NO. 28 | 4923 | Noir | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Noir | 2× |
| Tile 1 x 8 with Groove | 4162 | Noir | 1× |
| Plate 1 x 2 | 3023 | Noir | 8× |
| Plate 1 x 8 | 3460 | Noir | 1× |
| Plate 2 x 2 | 3022 | Noir | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Noir | 1× |
| Plate 2 x 3 | 3021 | Noir | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Noir | 2× |
| Plate 1 x 2 | 3023 | Noir | 6× |
| Plate 2 x 4 | 3020 | Noir | 3× |
| FLAT TILE 1X2 | 3069 | Olive Green | 5× |
| FLAT TILE 1X1, ROUND | 35381 | Olive Green | 3× |
| Plant, Plate 1 x 1 Round with 3 Leaves | 32607 | Noir | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Noir | 5× |
| Plate 1 x 3 | 3623 | Noir | 10× |
| PLATE 2X2 ROUND | 4032 | Marron rougeâtre | 3× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Noir | 1× |
| BRICK 2X10 | 92538 | Marron rougeâtre | 1× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Noir | 2× |
| PLATE 1X2 W. 1 HORIZONTAL SNAP | 65458 | Marron rougeâtre | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Noir | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Noir | 1× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Noir | 2× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Noir | 2× |
| Technic Beam 1 x 3 Thick | 32523 | Noir | 3× |
| Technic Axle 3 with Stop | 24316 | Marron rougeâtre | 1× |
| Plate 2 x 8 | 3034 | Beige foncé | 3× |
| Plate 2 x 4 | 3020 | Beige foncé | 2× |
| Plate 6 x 6 | 3958 | Beige foncé | 2× |
| Plate 1 x 4 | 3710 | Beige foncé | 8× |
| Wedge Plate 3 x 2 Left | 43723 | Beige foncé | 5× |
| Wedge Plate 3 x 2 Right | 43722 | Beige foncé | 5× |
| Plate 4 x 8 | 3035 | Beige foncé | 1× |
| Plate 1 x 6 | 3666 | Beige foncé | 3× |
| Wedge Plate 6 x 6 Cut Corner | 6106 | Beige foncé | 2× |
| Plate 2 x 3 | 3021 | Beige foncé | 6× |
| Plate 6 x 10 | 3033 | Beige foncé | 1× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Beige foncé | 2× |
| Plate 4 x 4 Corner | 2639 | Beige foncé | 2× |
| Tile 2 x 4 with Groove | 87079 | Beige foncé | 18× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Beige foncé | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Beige foncé | 26× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Beige foncé | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Beige foncé | 2× |
| Horn with Shaft | 88513 | Beige foncé | 3× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Beige foncé | 14× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Beige foncé | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Beige foncé | 16× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Beige foncé | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Beige foncé | 4× |
| Wedge Plate 2 x 2 Left | 24299 | Beige foncé | 5× |
| Wedge Plate 2 x 2 Right | 24307 | Beige foncé | 5× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Beige foncé | 2× |
| Plate Special 2 x 3 with Rocks | 27261 | Beige foncé | 6× |
| Plate 1x1 w/ 1.5 Hole | 35344 | Beige foncé | 4× |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 15208 | Beige foncé | 10× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Beige foncé | 6× |
| PLATE 2X2 ROUND | 4032 | Beige foncé | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Beige foncé | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Beige foncé | 2× |
| Animal / Creature Body Part, Claw with Clip | 3171 | Beige foncé | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Beige foncé | 4× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Beige foncé | 6× |
| Plate Special 1 x 1 with Tooth | 49668 | Beige foncé | 2× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Large | 11089 | Beige foncé | 4× |
| CROSSAXLE 3M WITH KNOB | 13670 | Beige foncé | 2× |
| ANGLE ELEMENT 135 DEG. [4] | 42156 | Beige foncé | 2× |
| Horn with Shaft | 88513 | Silver Metallic | 8× |
| Equipment Lantern | 37776 | Pearl Titanium | 1× |
| Weapon Sword (Uruk-hai) | 10050 | Pearl Titanium | 1× |
| PLATE 1X2 W/ SHAFT 12M | 49546 | Trans-transparent | 2× |
| Bar Curved with Axle End and 1 x 1 Round Plate | 4042 | Trans-transparent | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 29387 | Trans-transparent | 2× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Trans-transparent | 6× |
| ROUND BRICK 1X1 | 35390 | Trans-transparent | 4× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Trans-transparent | 1× |
| ROOF TILE 1X1X2/3 | 35338 | Noir | 4× |
| PLATE 1X2 | 28653 | Noir | 15× |
| PLATE 1X1 ROUND | 34823 | Noir | 9× |
| Parabolic Element D16 | 35395 | Noir | 1× |
| ROOF TILE 1X1X2/3 | 35338 | Transparent Bright Orange | 2× |
| BLADE, NO. 6 | 28683 | Transparent Bright Orange | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 29387 | Transparent Bright Orange | 2× |
| PLATE 1X2 | 28653 | Transparent Bright Orange | 2× |
| Wave / Lightning Angular, Single | 27256 | Trans-bleu clair | 2× |
| Curled Decorative Ornament with Bar | 28870 | Trans-vert néon | 2× |
| ROOF TILE 1X1X2/3 | 35338 | Trans-vert néon | 5× |
| PLATE 1X2 | 28653 | Trans-vert néon | 2× |
| Nose Cone Small 1x1 | 28701 | Trans-vert néon | 2× |
| PLATE 1X1 W/TOOTH | 35162 | Trans-vert néon | 3× |
| PLATE 1X2 | 28653 | Noir | 4× |
| PLATE 1X1 ROUND | 34823 | Noir | 2× |
| PYRAMID RIDGED TILE 1X1X2/3 | 35343 | Noir | 2× |
| ROOF TILE 1X1X2/3 | 35338 | Trans-bleu clair | 2× |
| AXE HEAD W HOLE Ø 3.2 | 79805 | Trans-bleu clair | 2× |
| PLATE 1X2 | 28653 | Trans-bleu clair | 2× |
| KITCHEN EQUIPMENT, NO. 9 | 3576 | Trans-bleu clair | 2× |
| Wave / Lightning Angular, Single | 27256 | Trans-rose foncé | 2× |
| ROOF TILE 1X1X2/3 | 35338 | Noir | 2× |
| PLATE 1X2 | 28653 | Noir | 2× |
| Plant, Flower, Peony Rose with 2 Layers | 5904 | Noir | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Jaune | 3× |
| Cone 1 x 1 [Top Groove] | 59900 | Jaune | 4× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Jaune | 2× |
| Plate 1 x 1 | 3024 | Jaune | 4× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Jaune | 9× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Citron vert | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Jaune | 4× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Jaune | 2× |
| Plate 1 x 2 | 3023 | Jaune | 8× |
| Plate 1x1 with Up Right Holder | 44842 | Medium Lime | 2× |
| Horn with Shaft | 88513 | Medium Lime | 4× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Jaune | 4× |
| Minifig Neckwear Shoulder Pads with Spikes | 12618 | Or nacré | 1× |
| Fin Jagged with Axle Hole | 76919 | Or nacré | 2× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Medium Lime | 8× |
| Plate 2 x 2 | 3022 | Jaune | 5× |
| Wedge Sloped 45° 2 x 4 Triple | 47759 | Or nacré | 6× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Or nacré | 8× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Orange clair vif | 5× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Or nacré | 3× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Beige foncé | 3× |
| Minifig Neckwear Armor Shoulder Pad Single with Scabbard for 2 Katanas, Wedge | 5501 | Or nacré | 1× |
| Weapon Sword / Katana / Wakizashi Short | 5644 | Or nacré | 5× |
| Creature Body Part, Dragon Head Upper Jaw, Hollow Eyes, Spikes | 3770 | Blanc | 4× |
| Wedge Plate 2 x 2 Left | 24299 | Jaune | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Jaune | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Jaune | 12× |
| Wedge Sloped 4 x 4 Triple with 3 Ridges on Slope | 86148 | Or nacré | 6× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Jaune | 9× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Jaune | 9× |
| Wedge Plate 2 x 4 27° Right | 65426 | Jaune | 1× |
| Wedge Plate 2 x 4 27° Left | 65429 | Jaune | 1× |
| Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 48267 | Jaune | 2× |
| Large Figure Limb Cover / Claw / Spike Large with Axle | 15362 | Or nacré | 4× |
| Plate 2 x 2 Corner | 2420 | Blanc | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Blanc | 2× |
| Brick 2 x 2 | 3003 | Blanc | 2× |
| Brick 1 x 6 | 3009 | Blanc | 2× |
| Plate 2 x 4 | 3020 | Blanc | 5× |
| Plate 2 x 3 | 3021 | Blanc | 11× |
| Plate 2 x 2 | 3022 | Blanc | 3× |
| Plate 4 x 6 | 3032 | Blanc | 1× |
| Slope 45? 2 x 2 | 3039 | Blanc | 4× |
| ROUND BRICK 1X1 | 3062 | Blanc | 3× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Blanc | 2× |
| Plate 1 x 4 | 3710 | Blanc | 18× |
| ROOF TILE 1X3/25° INV. | 4287 | Blanc | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Blanc | 4× |
| ROOF TILE 1X2/45° | 3040 | Blanc | 6× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Blanc | 3× |
| Wedge Plate 3 x 2 Right | 43722 | Blanc | 5× |
| Wedge Plate 3 x 2 Left | 43723 | Blanc | 5× |
| BRICK 2X6 | 44237 | Blanc | 3× |
| Slope 45° 2 x 2 Double Convex | 3045 | Blanc | 2× |
| Plate 4 x 4 | 3031 | Blanc | 5× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Blanc | 4× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Blanc | 2× |
| Wedge Curved 4 x 4 No Top Studs | 47753 | Blanc | 3× |
| Tile Special 2 x 2 Inverted | 11203 | Blanc | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Blanc | 8× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Blanc | 6× |
| Slope Curved 4 x 2 No Studs | 93606 | Blanc | 2× |
| Slope Curved 4 x 1 Inverted | 13547 | Blanc | 4× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Blanc | 3× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Blanc | 2× |
ADN du build
Apercu des pieces de Ultra Dragon Battle
Avec 2 178 pieces, ce build est a +379% par rapport au set Ninjago moyen et a +248% par rapport a la sortie moyenne de 2026.
Par rapport au set Ninjago moyen
Set Ninjago moyen : 455 pieces sur 408 autres sets.
Par rapport au set moyen de 2026
Set moyen de 2026 : 625 pieces sur 428 autres sets.
Profil couleur
Couleur dominante
Noir
Pieces uniques
6.5 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Bracket 1 x 2 - 2 x 2 Inverted
49xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.









