


The Bone Demon
🏷️ 80028-1•🎨 Monkie Kid•📅 2021•🧱 1383 pièces•Avancé
Le set LEGO Monkie Kid Le Démon Osseux (80028-1) présente une confrontation en plusieurs étapes contre le formidable Démon Osseux, construit à partir de 1383 pièces. La construction élaborée débute avec deux araignées osseuses menaçantes, puis progresse vers la crypte du Démon Osseux Blanc, un lieu détaillé où Monkie Kid et Mei combattent des esprits osseux et un agile cafard osseux. Plus tard dans le conflit, un scorpion osseux redoutable émerge. Une caractéristique notable de ce set est son inclusion de plus d'éléments phosphorescents que tout ensemble LEGO précédent, améliorant l'ambiance sinistre. Monkie Kid manie son puissant mécha de combat et sa Planche Nuage, tandis que Mei utilise un jetpack ailé, chacun équipé d'armes à construire évolutives. Le point culminant implique la combinaison de toutes ces constructions modulaires distinctes – la crypte, les araignées, le cafard et le scorpion – en un imposant modèle du Démon Osseux, démontrant une technique de construction à emboîtement complexe pour une grande présentation finale.
Inventaire des pièces
| Pièce | Couleur | Qté |
|---|---|---|
![]() Technic Pin Connector Hub with 2 Perpendicular Axles 10197 | Gris bleuté foncé | 2× |
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Noir | 1× |
![]() Bar Holder with Clip 11090 | Gris bleuté foncé | 6× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Blanc | 2× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Violet foncé | 4× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Glow in Dark White | 3× |
![]() Tile Special 2 x 2 Inverted 11203 | Noir | 2× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Noir | 12× |
![]() Plate Round 6 x 6 with Hole 11213 | Blanc | 2× |
![]() Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom 11215 | Rouge | 1× |
Affichage de 10 sur 359 pièces
🔓 Inscrivez-vous pour voir toutes les pièces| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Glow in Dark White | 3× |
| Tile Special 2 x 2 Inverted | 11203 | Noir | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Noir | 12× |
| Plate Round 6 x 6 with Hole | 11213 | Blanc | 2× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Rouge | 1× |
| Large Figure Weapon Blade, Curved Tip with Axle | 11305 | Argent mat | 2× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Blanc | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Blanc | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Rouge | 4× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Noir | 2× |
| Slope Curved 4 x 1 Inverted | 13547 | Blanc | 2× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Blanc | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Gris bleuté foncé | 4× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Gris bleuté clair | 16× |
| Plate Special 1 x 2 with 5.9mm Towball Socket and Towball | 14419 | Gris bleuté foncé | 7× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Gris bleuté clair | 14× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Gris bleuté foncé | 2× |
| Insect Body Part, Leg / Tail / Tentacle / Claw | 15064 | Blanc | 16× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Vert vif | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Blanc | 4× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Rouge | 3× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Noir | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Violet foncé | 4× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Jaune | 4× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Blanc | 6× |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 15208 | Blanc | 1× |
| Brick Arch 1 x 6 x 2 - Thin Top without Reinforced Underside [New Version] | 15254 | Blanc | 2× |
| Large Figure Limb Cover / Claw / Spike Large with Axle | 15362 | Blanc | 10× |
| Minifig Neckwear Backpack with Horizontal Pin Hole | 15406 | Noir | 1× |
| Technic Steering Gear with 3 Towball Joints, Compact | 15460 | Gris bleuté foncé | 1× |
| Tile Round 2 x 2 with Hole | 15535 | Blanc | 2× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Rouge | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Blanc | 6× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Blanc | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Marron rougeâtre | 2× |
| Wedge Plate 4 Stud 45° Angle Plate | 15706 | Noir | 2× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Gris bleuté clair | 5× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Rouge | 2× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Or nacré | 2× |
| Brick Round 2 x 2, Pin Holes | 17485 | Blanc | 8× |
| Weapon Sword with Thick Crossguard (Roman Gladius) | 18034 | Argent mat | 2× |
| Plate Special 1 x 2 with Handles on Ends | 18649 | Noir | 1× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Noir | 2× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Blanc | 3× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Gris bleuté foncé | 2× |
| Plate Round Corners 2 x 6 Double | 18980 | Gris bleuté clair | 2× |
| Lower Body, Ghost Marbled Black | 19859pat0007 | Trans-violet | 1× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Gris bleuté foncé | 4× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Or nacré | 2× |
| Tile Special 2 x 3 Pentagonal | 22385 | Rouge | 1× |
| Tile Special 2 x 3 Pentagonal | 22385 | Violet foncé | 19× |
| Bar 2L with Towball | 22484 | Gris bleuté foncé | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Noir | 3× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Gris bleuté clair | 4× |
| Plate Special 1 x 2 with End Towball | 22890 | Gris bleuté foncé | 2× |
| Brick 2 x 2 Corner | 2357 | Blanc | 2× |
| Weapon Sword, Blade with Bar, Double Edge | 23860 | Trans-Bright Green | 1× |
| Book Cover [Plain] | 24093 | Trans-bleu clair | 1× |
| Large Figure Weapon Lightsaber Hilt with Axle Hole and Two Bar Holders | 24122 | Noir | 4× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Or nacré | 2× |
| Wedge Plate 3 x 6 Cut Corners | 2419 | Blanc | 2× |
| Plate 2 x 2 Corner | 2420 | Noir | 6× |
| Plate 2 x 2 Corner | 2420 | Violet foncé | 12× |
| Slope Curved 2 x 1 Inverted | 24201 | Rouge | 6× |
| Slope Curved 2 x 1 Inverted | 24201 | Gris bleuté clair | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Noir | 2× |
| Wedge Plate 2 x 2 Left | 24299 | Blanc | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Blanc | 1× |
| Slope Inverted 75° 2 x 1 x 3 | 2449 | Blanc | 2× |
| Plate Special 2 x 2 with Pin on Bottom | 2476a | Gris bleuté clair | 1× |
| Tile Round 1 x 1 Quarter | 25269 | Glow in Dark White | 10× |
| Tile Round 1 x 1 Quarter | 25269 | Blanc | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Noir | 2× |
| Tassel with 1 x 1 Round Stud | 25375 | Or nacré | 2× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Gris bleuté foncé | 3× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Blanc | 1× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Noir | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-bleu clair | 8× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Noir | 2× |
| Plate Special, 2 x 2 Studs and Handle, Closed Ends (Mech Chest Plate / Armor) | 27167 | Jaune | 1× |
| Plate Special 2 x 3 with Rocks | 27261 | Blanc | 4× |
| Windscreen 6 x 4 x 1 Hexagonal with Handle | 27262 | Blanc | 3× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Rouge | 6× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Gris bleuté foncé | 4× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Blanc | 1× |
| Technic Axle Towball | 2736 | Gris bleuté clair | 16× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Blanc | 2× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Gris bleuté foncé | 1× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Rouge | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Glow in Dark White | 16× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Blanc | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Blanc | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Glow in Dark White | 16× |
| Brick Special 2 x 2 with 2 Pins and Axle Hole | 30000 | Gris bleuté clair | 1× |
| Brick 2 x 3 | 3002 | Gris bleuté foncé | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Blanc | 6× |
| Plate 2 x 4 | 3020 | Gris bleuté foncé | 4× |
| Plate 2 x 4 | 3020 | Violet foncé | 13× |
| Plate 2 x 4 | 3020 | Marron rougeâtre | 1× |
| Plate 2 x 3 | 3021 | Noir | 2× |
| Plate 2 x 3 | 3021 | Violet foncé | 2× |
| Plate 2 x 3 | 3021 | Gris bleuté clair | 3× |
| Plate 2 x 2 | 3022 | Noir | 2× |
| Plate 2 x 2 | 3022 | Blanc | 2× |
| Plate 2 x 2 | 3022 | Violet foncé | 8× |
| Plate 2 x 2 | 3022 | Jaune | 4× |
| Plate 2 x 2 | 3022 | Rouge | 2× |
| Plate 1 x 2 | 3023 | Violet foncé | 8× |
| Plate 1 x 2 | 3023 | Rouge | 3× |
| Plate 1 x 2 | 3023 | Trans-bleu clair | 30× |
| Brick Special 1 x 2 with Handle | 30236 | Noir | 2× |
| Plate 1 x 1 | 3024 | Rouge | 4× |
| Plate 4 x 4 | 3031 | Noir | 2× |
| Plate 4 x 4 | 3031 | Violet foncé | 2× |
| Plate 2 x 8 | 3034 | Blanc | 1× |
| Plate Round Corner 3 x 3 | 30357 | Violet foncé | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Trans-bleu clair | 1× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Noir | 1× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Rouge | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | 30383 | Gris bleuté foncé | 2× |
| Slope 45° 2 x 2 Double | 3043 | Noir | 1× |
| Brick Round 1 x 1 Open Stud | 3062b | Glow in Dark White | 4× |
| Tile 2 x 2 with Groove | 3068b | Rouge | 1× |
| Tile 1 x 2 with Groove | 3069b | Gris bleuté clair | 3× |
| Tile 1 x 2 with Groove | 3069b | Noir | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gris bleuté foncé | 6× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Blanc | 2× |
| Technic Axle and Pin Connector Angled #5 - 112.5° | 32015 | Noir | 18× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Rouge | 2× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Noir | 12× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Noir | 2× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Blanc | 6× |
| Wedge Plate 4 x 6 Cut Corners | 32059 | Gris bleuté clair | 2× |
| Wedge Plate 4 x 6 Cut Corners | 32059 | Noir | 1× |
| Technic Axle 2 Notched | 32062 | Rouge | 34× |
| Technic Axle 2 Notched | 32062 | Noir | 4× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Azur moyen | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Blanc | 12× |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 32124 | Noir | 4× |
| Technic Beam 1 x 15 Thick | 32278 | Blanc | 2× |
| Technic Beam 1 x 5 Thick | 32316 | Blanc | 2× |
| Technic Brick 4 x 4 with 2 x 2 Opening | 32324 | Noir | 1× |
| Technic Beam 1 x 3 Thick | 32523 | Noir | 1× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Noir | 5× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Gris bleuté clair | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Blanc | 2× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Noir | 2× |
| Plate 1 x 8 | 3460 | Rouge | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Blanc | 10× |
| Weapon Sword Hilt with Dragon Head | 36017 | Blanc | 1× |
| Plate 1 x 3 | 3623 | Noir | 2× |
| Minifig Head Skeleton, Standard Skull Print | 3626cpr0895 | Blanc | 2× |
| Brick Arch 1 x 4 | 3659 | Blanc | 2× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Blanc | 4× |
| Plate 1 x 6 | 3666 | Blanc | 6× |
| Turntable 2 x 2 Plate - Top | 3679 | Gris bleuté clair | 1× |
| Turntable 2 x 2 Plate, Base | 3680 | Rouge | 1× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Blanc | 6× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Gris bleuté clair | 6× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Rouge | 5× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Noir | 4× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Noir | 4× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Noir | 2× |
| Technic Axle 4 | 3705 | Noir | 2× |
| Technic Axle 6 | 3706 | Rouge | 2× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Rouge | 3× |
| Plate 1 x 4 | 3710 | Blanc | 2× |
| Plate 1 x 4 | 3710 | Noir | 9× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Beige | 2× |
| Equipment Candlestick | 37762 | Rouge | 4× |
| Equipment Lantern | 37776 | Or nacré | 2× |
| Plate 2 x 6 | 3795 | Noir | 3× |
| Plate 2 x 6 | 3795 | Gris bleuté clair | 2× |
| Plate 2 x 10 | 3832 | Noir | 3× |
| Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 3839b | Noir | 1× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Noir | 5× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Rouge | 2× |
| Hinge Brick 1 x 2 Base | 3937 | Blanc | 1× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Blanc | 9× |
| Tile 1 x 1 Heart | 39739 | Rouge | 4× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Noir | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Blanc | 8× |
| Brick Special 1 x 1 with Headlight | 4070 | Rouge | 4× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Gris bleuté clair | 1× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Noir | 4× |
| Wedge Plate 4 x 2 Right | 41769 | Noir | 3× |
| Wedge Plate 4 x 2 Left | 41770 | Noir | 3× |
| Brick Curved 6 x 1 Inverted | 42023 | Blanc | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Rouge | 6× |
| Technic Pin 1/2 | 4274 | Gris bleuté clair | 25× |
| Slope 33° 3 x 1 | 4286 | Blanc | 2× |
| Wedge Sloped 45° 3 x 3 Left | 42862 | Blanc | 1× |
| Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection | 4287c | Noir | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Noir | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Noir | 6× |
| Equipment Pot / Cauldron 3 x 3 x 1 & 3/4 with Handles | 4341 | Noir | 2× |
| Dish 3 x 3 Inverted [Radar] | 43898 | Trans-bleu clair | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | 44301b | Blanc | 2× |
| Dish 6 x 6 Inverted (Radar) with Solid Studs | 44375b | Blanc | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger on Side, without Groove | 44567b | Gris bleuté foncé | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger on Side, without Groove | 44567b | Noir | 1× |
| Mudguard 2 x 4 with Molded Headlights | 44674 | Rouge | 4× |
| Weapon Gun / Blaster with Studs on Side | 44709 | Blanc | 1× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Noir | 4× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Rouge | 11× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Blanc | 6× |
| Technic Axle 3 | 4519 | Gris bleuté clair | 2× |
| Technic Pin Connector 3L with 2 Pins and Center Hole [Pin Ridges Across Part] | 46189 | Noir | 2× |
| Helmet with Antennae and Headphones and Black Visor with Green Honeycomb, Gold/Green Decorations Print (Mei) | 46534pr0340 | Blanc | 1× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Trans-bleu clair | 2× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Noir | 4× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Blanc | 3× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Blanc | 4× |
| Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 47458 | Blanc | 17× |
| Wedge Sloped 45° 3 x 3 Right | 48165 | Blanc | 1× |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket | 48169 | Blanc | 6× |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top] | 48170 | Gris bleuté foncé | 4× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Noir | 2× |
| Slope Inverted 45° 4 x 2 Double | 4871 | Rouge | 1× |
| Slope Inverted 45° 4 x 2 Double | 4871 | Noir | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | 48729b | Blanc | 11× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Noir | 2× |
| Wedge Plate 7 x 6 Boat Bow with Stud Notches | 50303 | Noir | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Gris bleuté clair | 1× |
| Slope Curved 3 x 1 No Studs | 50950 | Violet foncé | 4× |
| Wedge Plate 2 x 4 | 51739 | Blanc | 3× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | 53451 | Argent mat | 18× |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots] | 53923 | Noir | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Blanc | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Rouge | 5× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Jaune | 2× |
| Wedge Plate 6 x 3 Right | 54383 | Blanc | 1× |
| Wedge Plate 6 x 3 Left | 54384 | Blanc | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Gris bleuté foncé | 4× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Noir | 10× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Gris bleuté clair | 2× |
| Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin with Squared Hole | 57697 | Noir | 2× |
| Glass for Window 1 x 4 x 6 | 57895 | Gris bleuté foncé | 1× |
| Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | 57909b | Blanc | 2× |
| Technic Axle 5.5 with Stop [Rounded Short End] | 59426 | Gris bleuté foncé | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Noir | 6× |
| Cone 1 x 1 [Top Groove] | 59900 | Blanc | 3× |
| Cone 1 x 1 [Top Groove] | 59900 | Noir | 22× |
| Cone 1 x 1 [Top Groove] | 59900 | Or nacré | 2× |
| Brick Arch 1 x 3 x 2 Curved Top | 6005 | Glow in Dark White | 4× |
| Torso - Skeleton Thick Shoulder Pins | 60115 | Blanc | 2× |
| Chain 16L [21 Links] | 60169 | Trans-bleu clair | 4× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Rouge | 4× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Noir | 3× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Rouge | 2× |
| Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud] | 60475b | Noir | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Noir | 1× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Noir | 2× |
| Door Frame 1 x 4 x 6 Type 2 | 60596 | Gris bleuté clair | 1× |
| Door Frame 2 x 4 x 6 | 60599 | Gris bleuté clair | 1× |
| Brick Arch 1 x 6 x 3 1/3 Curved Top | 6060 | Glow in Dark White | 10× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Blanc | 1× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Blanc | 10× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Gris bleuté foncé | 2× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Blanc | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Noir | 25× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Noir | 1× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Jaune | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Or nacré | 3× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Argent mat | 10× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-Bright Green | 4× |
| Brick Special 2 x 2 with Pin and Axle Hole | 6232 | Blanc | 3× |
| Technic Pin Connector Round [Slotted] | 62462 | Rouge | 2× |
| Leg Skeleton | 6266 | Blanc | 4× |
| Tile 1 x 3 | 63864 | Gris bleuté clair | 2× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Rouge | 6× |
| Bar 6L with Stop Ring | 63965 | Blanc | 2× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Rouge | 1× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Gris bleuté foncé | 1× |
| Wedge 4 x 4 Fractured Polygon Top | 64867 | Blanc | 7× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Argent mat | 5× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Rouge | 1× |
| Brick Round Corner 3 x 3 x 1 No Studs | 65617 | Glow in Dark White | 8× |
| Technic Axle 3 with Stud | 6587 | Beige foncé | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Noir | 4× |
| Weapon Hilt Symmetric | 66909 | Or métallique | 2× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Blanc | 1× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Violet foncé | 6× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Noir | 4× |
| Plate Special 2 x 2 with Wheel Holders with Cross (+) Slots on Pins | 67687 | Noir | 2× |
| Cloud / Dust with Bar | 68547 | Blanc | 1× |
| Tile 2 x 6 | 69729 | Noir | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Noir | 2× |
| Slope Inverted 45° 4 x 4 Double with 2 Holes | 72454 | Noir | 2× |
| Plate Special, Wave / Power Burst / Flame, with Two Studs | 73304 | Trans-bleu clair | 1× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Noir | 6× |
| Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | 75937 | Blanc | 2× |
| Banner, Ragged with Holes, Left, Silver and Dark Purple Details (Bone Demon) Print | 78820a | Unknown | 1× |
| Banner, Ragged with Holes, Right, Silver and Dark Purple Details (Bone Demon) Print | 78820b | Unknown | 1× |
| Sticker Sheet for Set 80028-1 | 78935 | Unknown | 1× |
| Plate Round 1 x 1 with Open Stud | 85861 | Trans-bleu clair | 10× |
| Plate Round 1 x 1 with Open Stud | 85861 | Blanc | 1× |
| Plate Round 1 x 1 with Open Stud | 85861 | Noir | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Rouge | 2× |
| Tile 2 x 4 with Groove | 87079 | Noir | 2× |
| Tile 2 x 4 with Groove | 87079 | Rouge | 1× |
| Technic Axle 4 with Stop | 87083 | Gris bleuté foncé | 4× |
| Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 87544 | Rouge | 3× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Gris bleuté clair | 3× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Blanc | 18× |
| Plate Special 3 x 4 with 1 x 4 Center Studs [Plain] | 88646 | Gris bleuté clair | 1× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole | 92013 | Vert foncé | 1× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole | 92013 | Noir | 1× |
| Plate Special 4 x 6 with Trap Door Hinge [Long Pins] | 92099 | Gris bleuté foncé | 1× |
| Hinge Plate 2 x 2 Locking with 1 Finger on Top | 92582 | Blanc | 4× |
| Animal Body Part, Dog Bone [Long] | 92691 | Blanc | 4× |
| Plate Special 1 x 2 with Angled Handles on Side | 92692 | Noir | 2× |
| Arm Skeleton Bent with Clips at 90° [Vertical Grip] | 93061 | Blanc | 4× |
| Panel 1 x 2 x 1 with Rounded Corners and Central Divider | 93095 | Orange clair vif | 1× |
| Animal Body Part, Dog Bone [Short] | 93160 | Glow in Dark White | 3× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Blanc | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Rouge | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Violet foncé | 2× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Rouge | 2× |
| Weapon Pike / Spear Flat End | 93789 | Argent mat | 2× |
| Bucket 1 x 1 x 1 Handle | 95344 | Gris bleuté foncé | 2× |
| Brick and Axle Separator v2.0 | 96874 | Orange | 1× |
| Tile Round 1 x 1 | 98138 | Gris bleuté foncé | 4× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Blanc | 10× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Gris bleuté foncé | 2× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Argent mat | 8× |
| Pneumatic Hose Connector with Axle Connector | 99021 | Gris bleuté foncé | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Violet foncé | 7× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Gris bleuté clair | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Noir | 15× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Orange clair vif | 4× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Noir | 9× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Rouge | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Blanc | 5× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Rouge | 5× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Noir | 3× |
| Hood Long, Angular | 59276 | Noir | 2× |
| Torso Armor, Dark Purple Circle with White Symbol, Ornate White Bones Design Print, Glow in the Dark White Arms, White Hands | 973c61h27pr5734 | Noir | 2× |
| Minifig Head Skeleton / Bone Spirit, Red Eyes, Jagged Mouth Print | 3626cpr3527 | Glow in Dark White | 2× |
| Hair Long with 2 Buns and Green Streaks | 66915pr0001 | Noir | 1× |
| Minifig Neckwear Armor with Dual Layer Shoulder Pads | 35635 | Or nacré | 1× |
| Hips and White Legs with Green Straps, Gold Trim Print | 970c27pr1889 | Blanc | 1× |
| Torso Armor, Intricate Gold and Bright Green Design, Zipper Print, White Arms, Bright Green Hands | 973c27h06pr5523 | Blanc | 1× |
| Minifig Head Mei, Peach Lips, Dark Turquoise Device on Left Eye / Winking Right Eye Print | 3626cpr3416 | Jaune | 1× |
| Hair Short, Swept Up with Red Headband with Gold Trim/Decoration | 66912pat0001pr0001 | Noir | 1× |
| Torso Jacket, White Zipper, Reddish Brown Collar, Animal Spots Pockets, Badges Print, Bright Light Orange Arms, Yellow Hands | 973c38h01pr5723 | Orange clair vif | 1× |
| Minifig Neckwear Headphones | 66913 | Rouge | 1× |
| Hips with Red Legs and Black Boots Pattern with Key Chain, White Toes, White Trim print | 970c22pat03pr0001 | Rouge | 1× |
| Minifig Head Monkie Kid, Thick Eyebrows, Mean Smirk / Angry Print | 3626cpr9833 | Jaune | 1× |
| Hips and Legs Under Dress/Robe with Light Bluish grey Chains, White/Dark Purple Decorations (Spider Queen) | 36036pr0032 | Noir | 1× |
| Torso Armor, White Bones, Dark Purple and Lavender Stomach Print, White Arms and Hands | 973c27h27pr5733 | Noir | 1× |
| Minifig Neckwear Armor Shoulder Pads | 41637 | Violet foncé | 1× |
| Hair 6 Spikes, High Bun, Long Sides | 77374 | Blanc | 1× |
| Minifig Head White Bone Demon, Magenta Lips, Red Eyes and Smile with Teeth / Black Eyes and Closed Mouth Smile Print | 3626cpr3526 | Blanc | 1× |
ADN du build
Apercu des pieces de The Bone Demon
Avec 1 383 pieces, ce build est a +53% par rapport au set Monkie Kid moyen et a +158% par rapport a la sortie moyenne de 2021.
Par rapport au set Monkie Kid moyen
Set Monkie Kid moyen : 906 pieces sur 54 autres sets.
Par rapport au set moyen de 2021
Set moyen de 2021 : 537 pieces sur 471 autres sets.
Profil couleur
Couleur dominante
Blanc
Pieces uniques
4.8 pieces par type unique
Facteur de repetition
Nombre moyen de pieces par type unique.
Piece la plus utilisee
Plate 1 x 2
41xLes résultats sont basés sur les inventaires officiels LEGO. La précision s'améliore à mesure que vous confirmez la complétude des sets.
Ce site n'est ni affilié ni approuvé par le Groupe LEGO.

![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061032.jpg)

![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6045936.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6513769.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6348767.jpg)



