


Cosa costruirai? L'iconica ECTO-1! Immergiti in un gratificante progetto di costruzione con il LEGO® Ghostbusters ECTO-1, set 10274-1. Questa dettagliata riproduzione dell'ambulanza Cadillac Miller-Meteor del 1959 convertita, proveniente dai film Ghostbusters, offre una fuga perfetta. Ispirato alla versione del film Ghostbusters: Afterlife, il modello vanta uno sterzo funzionante, una botola, una trappola per fantasmi, un sedile del mitragliere posteriore estensibile e uno zaino protonico. Completo del classico logo Ghostbusters, è un must per ogni fan in cerca di una sfida accattivante e un pezzo da esposizione sorprendente.
Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Tile 6 x 6 with Bottom Tubes 10202 | Nero | 1× |
![]() Tile 6 x 6 with Bottom Tubes 10202 | Bianco | 1× |
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Nero | 3× |
![]() Brick Curved 1 x 4 x 1 1/3 No Studs 10314 | Bianco | 9× |
![]() Technic Gear 8 Tooth [Reinforced] 10928 | Grigio bluastro scuro | 2× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Nero | 2× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Giallo | 2× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Rosso | 2× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Nero | 2× |
![]() Plate 3 x 3 11212 | Grigio bluastro chiaro | 6× |
Visualizzati 10 di 571 pezzi
🔓 Registrati per vedere tutti i pezzi| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Nero | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Giallo | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Rosso | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Nero | 2× |
| Plate 3 x 3 | 11212 | Grigio bluastro chiaro | 6× |
| Plate 3 x 3 | 11212 | Bianco | 2× |
| Sports Roller Skate | 11253 | Argento opaco | 44× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Nero | 1× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Rosso | 1× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Grigio bluastro chiaro | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Bianco | 5× |
| Slope Curved 4 x 1 Inverted | 13547 | Nero | 6× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Rosso | 2× |
| Brick Arch 1 x 3 x 3 [Gothic] | 13965 | Bianco | 2× |
| Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring | 13971 | Grigio bluastro chiaro | 1× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Grigio bluastro scuro | 1× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Grigio bluastro chiaro | 2× |
| Brick 1 x 1 x 3 | 14716 | Grigio bluastro chiaro | 2× |
| Brick 1 x 1 x 3 | 14716 | Rosso | 2× |
| Tile 2 x 2 Corner | 14719 | Nero | 2× |
| Tile 2 x 2 Corner | 14719 | Bianco | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Lime | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Nero | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Grigio bluastro chiaro | 1× |
| Tile Round 2 x 2 with 4 Dark Red Circles Print | 14769pr1167 | Nero | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder with Clock with Red Second Hand Print | 14769pr1172 | Bianco | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Nero | 8× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Bianco | 19× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 15100 | Nero | 1× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 15100 | Nero | 2× |
| Tyre 49.53 x 20 | 15413 | Nero | 4× |
| Technic Steering Gear with 3 Towball Joints, Compact | 15460 | Grigio bluastro scuro | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Grigio bluastro scuro | 3× |
| Tile Round 2 x 2 with Hole | 15535 | Rosso | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Bianco | 5× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 3× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Oro perlato | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Grigio bluastro chiaro | 3× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Rosso | 1× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Nero | 3× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Bianco | 2× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Rosso | 2× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Nero | 6× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Grigio bluastro chiaro | 4× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Nero | 8× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Bianco | 2× |
| Brick Round 2 x 2, Pin Holes | 17485 | Giallo | 2× |
| Plate Special 1 x 2 with Handles on Ends | 18649 | Nero | 3× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Nero | 7× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Oro perlato | 1× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Grigio bluastro chiaro | 5× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Nero | 1× |
| Bracket 3 x 2 x 1 1/3 with Pin Bottom | 18671 | Grigio bluastro chiaro | 2× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Grigio bluastro chiaro | 6× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Rosso | 2× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Nero | 1× |
| Windscreen 4 x 4 x 1 2/3 Canopy Half Sphere with Handle | 18990 | Trans-trasparente | 1× |
| Support Round 2 x 2 x 2 Stand with Reinforced Underside | 19798 | Bianco | 1× |
| Brick Special 1 x 1 with Scroll with Open Stud | 20310 | Beige | 2× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Bianco | 4× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Nero | 2× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Grigio bluastro chiaro | 4× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Rosso | 1× |
| Plate Special 1 x 2 with Wheel Holder, Single Slit | 21445 | Nero | 1× |
| Bar 2L with Towball | 22484 | Grigio bluastro scuro | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Bianco | 6× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 2 with End Towball | 22890 | Grigio bluastro scuro | 1× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Grigio bluastro scuro | 1× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Grigio bluastro chiaro | 3× |
| Equipment Goblet / Glass | 2343 | Argento opaco | 2× |
| Bar Holder with Hole and Bar Handle | 23443 | Grigio bluastro chiaro | 3× |
| Brick 2 x 2 Corner | 2357 | Bianco | 13× |
| Brick 2 x 2 Corner | 2357 | Giallo | 2× |
| Brick 2 x 2 Corner | 2357 | Nero | 6× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Bianco | 6× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Argento opaco | 9× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Grigio bluastro chiaro | 2× |
| Plate 2 x 2 Corner | 2420 | Nero | 1× |
| Plate 2 x 2 Corner | 2420 | Grigio bluastro chiaro | 2× |
| Plate 2 x 2 Corner | 2420 | Grigio bluastro chiaro | 1× |
| Plate 2 x 2 Corner | 2420 | Bianco | 2× |
| Plate 2 x 2 Corner | 2420 | Rosso | 3× |
| Slope Curved 2 x 1 Inverted | 24201 | Bianco | 1× |
| Tile 1 x 4 with Groove | 2431 | Nero | 19× |
| Tile 1 x 4 with Groove | 2431 | Grigio bluastro chiaro | 5× |
| Tile 1 x 4 with Groove | 2431 | Grigio bluastro scuro | 3× |
| Tile 1 x 4 with Groove | 2431 | Bianco | 7× |
| Technic Axle 3 with Stop | 24316 | Marrone rossastro | 2× |
| Tile Special 1 x 2 with Handle | 2432 | Grigio bluastro scuro | 4× |
| Plate 2 x 12 | 2445 | Bianco | 1× |
| Plate 2 x 12 | 2445 | Nero | 1× |
| Slope Inverted 75° 2 x 1 x 3 | 2449 | Nero | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Nero | 2× |
| Brick 2 x 6 | 2456 | Grigio bluastro chiaro | 2× |
| Brick 2 x 6 | 2456 | Giallo | 2× |
| Brick Special 1 x 2 with Pin | 2458 | Bianco | 7× |
| Brick Special 1 x 2 with Pin | 2458 | Grigio bluastro chiaro | 1× |
| Tile Special 2 x 2 with Top Pin | 2460 | Rosso | 1× |
| Brick 1 x 16 | 2465 | Nero | 1× |
| Barrel 2 x 2 x 2 | 2489 | Grigio bluastro chiaro | 4× |
| Brick Round 2 x 2 x 1 1/3 Inverted | 24947 | Giallo | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Rosso | 6× |
| Tile Round 1 x 1 Quarter | 25269 | Grigio bluastro chiaro | 20× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Nero | 4× |
| Plate 4 x 4 Corner | 2639 | Bianco | 1× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-rosso | 1× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Nero | 1× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Trans-blu scuro | 5× |
| Plate Round 2 x 2 with Rounded Bottom with Dark Blue Stripes print | 2654pr0004 | Grigio bluastro chiaro | 1× |
| Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 26599 | Nero | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Bianco | 3× |
| Tile 2 x 3 | 26603 | Nero | 2× |
| Tile 2 x 3 | 26603 | Grigio bluastro chiaro | 1× |
| Technic Disc 3 x 3 with Rim print | 2723pr0004 | Grigio bluastro chiaro | 4× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Nero | 2× |
| Technic Slope Long 1 x 6 with 3 Pin Holes | 2744 | Nero | 2× |
| Tile 4 x 4 Curved, Macaroni | 27507 | Bianco | 1× |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | 2780 | Nero | 48× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Nero | 6× |
| Zipline, 22L with 2 Connectors - Flexible | 27965 | Argento opaco | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Grigio bluastro scuro | 2× |
| Technic Beam 1 x 4 Thin with Stud Connector | 2825 | Nero | 1× |
| Minifig Head [Plain] [Vented Stud - 2 Holes] | 28621 | Trans-trasparente | 1× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Nero | 8× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Grigio bluastro chiaro | 6× |
| Lever Small Base with Black Lever | 298c02 | Nero | 1× |
| Brick 2 x 4 | 3001 | Nero | 1× |
| Brick 2 x 4 | 3001 | Rosso | 3× |
| Brick 2 x 4 | 3001 | Nero | 4× |
| Brick 2 x 3 | 3002 | Nero | 1× |
| Brick 2 x 3 | 3002 | Giallo | 1× |
| Brick 2 x 3 | 3002 | Nero | 2× |
| Brick 2 x 3 | 3002 | Bianco | 3× |
| Brick 2 x 2 | 3003 | Nero | 3× |
| Brick 2 x 2 | 3003 | Bianco | 4× |
| Brick 1 x 2 | 3004 | Rosso | 3× |
| Brick 1 x 2 | 3004 | Bianco | 9× |
| Brick 1 x 2 | 3004 | Grigio bluastro chiaro | 3× |
| Brick 1 x 2 | 3004 | Nero | 4× |
| Brick 1 x 2 | 3004 | Nero | 9× |
| Brick 1 x 1 | 3005 | Bianco | 8× |
| Brick 1 x 1 | 3005 | Grigio bluastro chiaro | 8× |
| Brick 2 x 10 | 3006 | Nero | 3× |
| Brick 1 x 8 | 3008 | Nero | 3× |
| Brick 1 x 8 | 3008 | Grigio bluastro chiaro | 1× |
| Brick 1 x 8 | 3008 | Bianco | 1× |
| Brick 1 x 6 | 3009 | Bianco | 1× |
| Brick 1 x 6 | 3009 | Nero | 5× |
| Brick 1 x 4 | 3010 | Bianco | 3× |
| Brick 1 x 4 | 3010 | Nero | 8× |
| Equipment Stretcher Holder | 30191 | Nero | 1× |
| Plate 2 x 4 | 3020 | Nero | 16× |
| Plate 2 x 4 | 3020 | Bianco | 7× |
| Plate 2 x 4 | 3020 | Giallo | 8× |
| Plate 2 x 3 | 3021 | Grigio bluastro chiaro | 1× |
| Plate 2 x 3 | 3021 | Rosso | 1× |
| Plate 2 x 3 | 3021 | Grigio bluastro chiaro | 3× |
| Plate 2 x 3 | 3021 | Bianco | 4× |
| Plate 2 x 3 | 3021 | Nero | 3× |
| Plate 2 x 3 | 3021 | Nero | 6× |
| Plate 2 x 3 | 3021 | Beige | 2× |
| Plate 2 x 2 | 3022 | Nero | 7× |
| Plate 2 x 2 | 3022 | Bianco | 22× |
| Plate 2 x 2 | 3022 | Giallo | 8× |
| Plate 1 x 2 | 3023 | Nero | 24× |
| Plate 1 x 2 | 3023 | Giallo | 6× |
| Plate 1 x 2 | 3023 | Bianco | 30× |
| Plate 1 x 2 | 3023 | Grigio bluastro chiaro | 2× |
| Plate 1 x 2 | 3023 | Nero | 36× |
| Plate 1 x 2 | 3023 | Beige | 1× |
| Plate 1 x 2 | 3023 | Trans-blu scuro | 4× |
| Plate 1 x 2 | 3023 | Rosso | 10× |
| Plate 1 x 2 | 3023 | Grigio bluastro chiaro | 19× |
| Plate 1 x 1 | 3024 | Grigio bluastro chiaro | 9× |
| Plate 1 x 1 | 3024 | Bianco | 14× |
| Plate 1 x 1 | 3024 | Nero | 6× |
| Plate 1 x 1 | 3024 | Rosso | 6× |
| Plate 4 x 12 | 3029 | Grigio bluastro scuro | 4× |
| Plate 4 x 10 | 3030 | Nero | 3× |
| Plate 4 x 4 | 3031 | Bianco | 1× |
| Plate 4 x 4 | 3031 | Nero | 9× |
| Plate 4 x 4 | 3031 | Grigio bluastro scuro | 1× |
| Plate 4 x 6 | 3032 | Nero | 1× |
| Plate 4 x 6 | 3032 | Grigio bluastro chiaro | 2× |
| Plate 4 x 6 | 3032 | Giallo | 1× |
| Plate 4 x 6 | 3032 | Nero | 2× |
| Plate 6 x 10 | 3033 | Grigio bluastro scuro | 2× |
| Plate 2 x 8 | 3034 | Nero | 2× |
| Plate 2 x 8 | 3034 | Grigio bluastro scuro | 3× |
| Plate 2 x 8 | 3034 | Grigio bluastro chiaro | 2× |
| Plate 2 x 8 | 3034 | Bianco | 1× |
| Plate 4 x 8 | 3035 | Nero | 6× |
| Plate 6 x 8 | 3036 | Nero | 1× |
| Plate 6 x 8 | 3036 | Nero | 1× |
| Plate 6 x 8 | 3036 | Bianco | 1× |
| Slope 18° 4 x 2 | 30363 | Bianco | 4× |
| Brick Round 2 x 2 Dome Top, Hollow Stud | 30367c | Grigio bluastro chiaro | 7× |
| Brick Round 2 x 2 Dome Top, Hollow Stud | 30367c | Bianco | 1× |
| Brick Round 2 x 2 Dome Top, Hollow Stud | 30367c | Giallo | 2× |
| Slope 45° 2 x 4 | 3037 | Nero | 2× |
| Slope 45° 2 x 4 | 3037 | Bianco | 10× |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | 30383 | Rosso | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | 30383 | Grigio bluastro scuro | 11× |
| Slope 45? 2 x 2 | 3039 | Trans-blu scuro | 16× |
| Slope 45? 2 x 2 | 3039 | Bianco | 2× |
| Slope 45° 2 x 2 with Black Grill Print | 3039pr0009 | Grigio bluastro chiaro | 4× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Bianco | 1× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Rosso | 1× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Giallo | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Nero | 3× |
| Slope 45° 2 x 1 Double with Inside Stud Holder | 3044c | Grigio bluastro scuro | 1× |
| Wedge 3 x 3 Cut Corner | 30505 | Nero | 1× |
| Plate Round Corner 4 x 4 | 30565 | Bianco | 1× |
| Brick Round 1 x 1 Open Stud | 3062b | Nero | 12× |
| Brick Round 1 x 1 Open Stud | 3062b | Rosso | 3× |
| Brick Round 1 x 1 Open Stud | 3062b | Grigio bluastro chiaro | 1× |
| Brick Round 1 x 1 Open Stud | 3062b | Nero | 1× |
| Brick Round 1 x 1 Open Stud | 3062b | Grigio bluastro chiaro | 2× |
| Tile 2 x 2 with Groove | 3068b | Nero | 4× |
| Tile 2 x 2 with Groove | 3068b | Bianco | 3× |
| Tile 2 x 2 with Groove | 3068b | Nero | 1× |
| Tile 1 x 2 with Groove | 3069b | Bianco | 13× |
| Tile 1 x 2 with Groove | 3069b | Rosso | 7× |
| Tile 1 x 2 with Groove | 3069b | Grigio bluastro chiaro | 3× |
| Tile 1 x 2 with Groove | 3069b | Grigio bluastro chiaro | 2× |
| Tile 1 x 2 with Groove | 3069b | Trans-Brown | 2× |
| Tile 1 x 2 with Video Tape and Reels Print | 3069bpr0020 | Grigio bluastro chiaro | 2× |
| Tile 1 x 2 with Stylised Computer Console Print | 3069bpr0086 | Grigio bluastro chiaro | 1× |
| Tile 1 x 2 with Red 82, Yellow and White Gauges Print | 3069bpr0101 | Grigio bluastro chiaro | 1× |
| Tile 1 x 2 with Broken Arrow Long Yellow with Black Border Print | 3069bpr0206 | Bianco | 1× |
| Tile 1 x 2 with Red and Yellow Control Panel Print (Reissue) | 3069bpr0290 | Bianco | 1× |
| Tile 1 x 2 with Controls, Slides, Joystick print | 3069bpr0307 | Grigio bluastro chiaro | 2× |
| Tile 1 x 1 with Groove | 3070b | Bianco | 4× |
| Tile 1 x 1 with Groove | 3070b | Rosso | 9× |
| Tile 1 x 1 with Groove | 3070b | Trans-trasparente | 2× |
| Tile 1 x 1 with Groove | 3070b | Grigio bluastro chiaro | 7× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Nero | 1× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Nero | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Bianco | 3× |
| Technic Plate 2 x 6 [5 Holes] | 32001 | Nero | 1× |
| Technic Pin 3/4 | 32002 | Beige | 2× |
| Technic Link 1 x 6 without Stoppers | 32005a | Nero | 2× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Giallo | 3× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Nero | 1× |
| Technic Axle and Pin Connector Angled #6 - 90° | 32014 | Nero | 1× |
| Technic Beam 1 x 5 Thin | 32017 | Grigio bluastro chiaro | 4× |
| Technic Brick 1 x 14 [13 Pin Holes] | 32018 | Grigio bluastro chiaro | 5× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Oro perlato | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Rosso | 2× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Nero | 5× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Grigio bluastro chiaro | 1× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Giallo | 2× |
| Technic Beam 1 x 7 Thin | 32065 | Nero | 1× |
| Technic Axle 5 | 32073 | Giallo | 5× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Giallo | 12× |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 32124 | Nero | 2× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Nero | 2× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Nero | 4× |
| Technic Beam 1 x 3 Thick | 32523 | Giallo | 5× |
| Technic Beam 1 x 3 Thick | 32523 | Nero | 1× |
| Technic Beam 1 x 7 Thick | 32524 | Nero | 1× |
| Technic Beam 1 x 7 Thick | 32524 | Nero | 1× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Nero | 4× |
| Technic Brick 6 x 8 with 4 x 6 Opening | 32532 | Nero | 5× |
| Technic Pin Long without Friction Ridges | 32556 | Beige | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Bianco | 1× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Grigio bluastro chiaro | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Grigio bluastro chiaro | 2× |
| Slope 33° 3 x 4 | 3297 | Bianco | 6× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Bianco | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Grigio bluastro chiaro | 3× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Nero | 2× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Nero | 3× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Grigio bluastro chiaro | 3× |
| Wheel 8 x 6 with Slot | 34337 | Grigio bluastro chiaro | 1× |
| Plate 1 x 8 | 3460 | Nero | 12× |
| Plate 1 x 8 | 3460 | Nero | 2× |
| Plate 1 x 8 | 3460 | Grigio bluastro chiaro | 11× |
| Plate 1 x 8 | 3460 | Bianco | 3× |
| Plate Special 4 x 4 with 3 x 3 Quarter Round Cutout | 35044 | Nero | 2× |
| Technic Driving Ring Extension, 8 Ridges | 35186 | Nero | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Grigio bluastro chiaro | 13× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Nero | 5× |
| Brick 1 x 3 | 3622 | Grigio bluastro chiaro | 3× |
| Brick 1 x 3 | 3622 | Rosso | 2× |
| Brick 1 x 3 | 3622 | Nero | 13× |
| Plate 1 x 3 | 3623 | Bianco | 6× |
| Plate 1 x 3 | 3623 | Nero | 16× |
| Plate 1 x 3 | 3623 | Grigio bluastro chiaro | 19× |
| Minifig Head [Plain] [Hollow Stud] | 3626c | Nero | 4× |
| Technic Gear 24 Tooth [New Style with Single Axle Hole] | 3648b | Grigio bluastro scuro | 1× |
| Technic Gear 40 Tooth | 3649 | Grigio bluastro chiaro | 1× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Nero | 4× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Bianco | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Nero | 2× |
| Slope Inverted 45° 2 x 1 | 3665 | Rosso | 2× |
| Plate 1 x 6 | 3666 | Nero | 13× |
| Plate 1 x 6 | 3666 | Rosso | 2× |
| Plate 1 x 6 | 3666 | Bianco | 8× |
| Plate 1 x 6 | 3666 | Grigio bluastro chiaro | 10× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Grigio bluastro chiaro | 3× |
| Slope Inverted 45° 2 x 2 Double Convex | 3676 | Grigio bluastro scuro | 2× |
| Turntable 2 x 2 Plate - Top | 3679 | Grigio bluastro chiaro | 1× |
| Turntable 2 x 2 Plate, Base | 3680 | Rosso | 1× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Nero | 3× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Grigio bluastro chiaro | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Nero | 3× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Grigio bluastro scuro | 9× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Giallo | 3× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Nero | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Giallo | 4× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Nero | 1× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Nero | 1× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Grigio bluastro chiaro | 3× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Nero | 7× |
| Technic Axle 4 | 3705 | Rosso | 1× |
| Technic Axle 6 | 3706 | Rosso | 1× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Grigio bluastro scuro | 1× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Bianco | 1× |
| Plate 1 x 4 | 3710 | Rosso | 2× |
| Plate 1 x 4 | 3710 | Bianco | 14× |
| Plate 1 x 4 | 3710 | Nero | 14× |
| Plate 1 x 4 | 3710 | Giallo | 15× |
| Plate 1 x 4 | 3710 | Grigio bluastro chiaro | 16× |
| Plate 1 x 4 | 3710 | Grigio bluastro chiaro | 1× |
| Technic Bush | 3713 | Grigio bluastro chiaro | 3× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Rosso | 1× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Bianco | 42× |
| Technic Plate 2 x 8 [7 Holes] | 3738 | Nero | 1× |
| Technic Gear Rack 1 x 4 | 3743 | Bianco | 2× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Beige | 2× |
| Bar, Parallel Angled with 2 Connecting Bars (Train Hinge) | 37494 | Nero | 2× |
| Plate 2 x 6 | 3795 | Grigio bluastro scuro | 5× |
| Plate 2 x 6 | 3795 | Nero | 1× |
| Plate 2 x 6 | 3795 | Bianco | 2× |
| Plate 2 x 6 | 3795 | Grigio bluastro chiaro | 1× |
| Plate 2 x 6 | 3795 | Grigio bluastro chiaro | 1× |
| Plate 2 x 10 | 3832 | Nero | 1× |
| Plate 2 x 10 | 3832 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 3839b | Nero | 1× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Nero | 1× |
| Hinge Brick 1 x 2 Base | 3937 | Nero | 2× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Lime | 8× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Bianco | 2× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Trans-trasparente | 1× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Nero | 1× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Giallo | 2× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Grigio bluastro chiaro | 2× |
| Plate 6 x 6 | 3958 | Nero | 1× |
| Plate 6 x 6 | 3958 | Grigio bluastro chiaro | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Grigio bluastro chiaro | 1× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Nero | 5× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Bianco | 1× |
| Brick Special 1 x 1 with Headlight | 4070 | Nero | 2× |
| Brick Special 1 x 1 with Headlight | 4070 | Nero | 4× |
| Brick Special 1 x 1 with Headlight | 4070 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Nero | 1× |
| Bar 1 x 4 x 2 with Studs | 4083 | Giallo | 3× |
| Plate 8 x 8 | 41539 | Nero | 1× |
| Tile 1 x 8 with Groove | 4162 | Bianco | 1× |
| Tile 1 x 8 with Groove | 4162 | Nero | 1× |
| Tile 1 x 8 with Groove | 4162 | Rosso | 3× |
| Tile 1 x 8 with Groove | 4162 | Grigio bluastro chiaro | 6× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Bianco | 3× |
| Wedge Curved 8 x 3 x 2 Open Right | 41749 | Bianco | 1× |
| Plate Special 1 x 2 with Ladder | 4175 | Bianco | 1× |
| Wedge Curved 8 x 3 x 2 Open Left | 41750 | Bianco | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Bianco | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Bianco | 1× |
| Brick Curved 6 x 1 | 42022 | Bianco | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Nero | 4× |
| Wheel 11 x 8 with Center Groove | 42610 | Grigio bluastro chiaro | 1× |
| Technic Pin 1/2 | 4274 | Grigio bluastro chiaro | 1× |
| Technic Pin 1/2 | 4274 | Nero | 3× |
| Plate 2 x 16 | 4282 | Grigio bluastro chiaro | 1× |
| Slope 33° 3 x 1 | 4286 | Nero | 1× |
| Slope 33° 3 x 1 | 4286 | Bianco | 2× |
| Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection | 4287c | Nero | 6× |
| Slope Curved 8 x 2 No Studs | 42918 | Bianco | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Nero | 25× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Nero | 5× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Bianco | 1× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Bianco | 1× |
| Wedge Curved 6 x 4 Triple | 43712 | Bianco | 2× |
| Wedge Sloped 45° 4 x 2 Right | 43720 | Bianco | 1× |
| Wedge Sloped 45° 4 x 2 Left | 43721 | Bianco | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Grigio bluastro chiaro | 1× |
| Wedge Plate 3 x 2 Left | 43723 | Grigio bluastro chiaro | 1× |
| Technic Beam 1 x 2 Thick | 43857 | Grigio bluastro chiaro | 4× |
| Hinge Tile 1 x 3 Locking with 1 Finger on Top | 44300 | Nero | 2× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | 44301b | Bianco | 2× |
| Hinge Plate 1 x 2 Locking with 1 Finger on Side, without Groove | 44567b | Nero | 3× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Rosso | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Grigio bluastro chiaro | 4× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Nero | 1× |
| Plate 1 x 10 | 4477 | Grigio bluastro chiaro | 9× |
| Plate 1 x 10 | 4477 | Nero | 4× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Grigio bluastro scuro | 2× |
| Brick Special 1 x 2 with Pin - Bottom Stud Holder | 44865 | Grigio bluastro scuro | 1× |
| Technic Axle 3 | 4519 | Giallo | 2× |
| Technic Axle 3 | 4519 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 4 Offset with Bar Holes | 4590 | Grigio bluastro scuro | 2× |
| Tap 1 x 1 without Hole in Spout | 4599b | Grigio bluastro chiaro | 2× |
| Tap 1 x 1 without Hole in Spout | 4599b | Nero | 1× |
| Technic Gear 28 Tooth Double Bevel | 46372 | Grigio bluastro chiaro | 1× |
| Windscreen 8 x 4 x 2 Curved [2 Dual-Fingered Click Hinges] | 46413 | Trans-trasparente | 2× |
| Windscreen 8 x 4 x 2 Curved [2 Dual-Fingered Click Hinges] | 46413 | Bianco | 1× |
| Wedge Plate 12 x 3 Left | 47397 | Bianco | 1× |
| Wedge Plate 12 x 3 Right | 47398 | Bianco | 1× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Trans-rosso | 2× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Trans-trasparente | 4× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Bianco | 1× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Grigio bluastro chiaro | 5× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Nero | 4× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | 48729b | Grigio bluastro scuro | 1× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Grigio bluastro chiaro | 14× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Nero | 1× |
| Brick 1 x 4 x 3 with Ghostbusters Logo print | 49311pr0008 | Bianco | 3× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Grigio bluastro chiaro | 7× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Rosso | 1× |
| Wedge Curved 10 x 3 Left | 50955 | Bianco | 1× |
| Wedge Curved 10 x 3 Right | 50956 | Bianco | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Bianco | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 3× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Trans-blu scuro | 32× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Grigio bluastro chiaro | 4× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Rosso | 7× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Nero | 1× |
| Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 7 teeth | 54671 | Grigio bluastro chiaro | 1× |
| Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End, 7 Teeth | 54672 | Nero | 3× |
| Technic Axle 8 with Stop | 55013 | Grigio bluastro scuro | 4× |
| Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | 56145 | Bianco | 4× |
| Technic Steering Arm 5.5 x 2 with Towball Socket Rounded, Chamfered | 57515 | Grigio bluastro scuro | 4× |
| Window 1 x 4 x 6 Frame with 3 Panes | 57894 | Nero | 2× |
| Technic Axle 5.5 with Stop [Rounded Short End] | 59426 | Grigio bluastro scuro | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Nero | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Trans-rosso | 4× |
| Cone 1 x 1 [Top Groove] | 59900 | Grigio bluastro chiaro | 4× |
| Brick Arch 1 x 3 x 2 Curved Top | 6005 | Bianco | 2× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Nero | 5× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Nero | 1× |
| Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud] | 60475b | Grigio bluastro chiaro | 6× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Grigio bluastro scuro | 3× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Bianco | 4× |
| Plate 1 x 12 | 60479 | Nero | 18× |
| Plate 1 x 12 | 60479 | Rosso | 2× |
| Slope 65° 2 x 1 x 2 | 60481 | Bianco | 2× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Bianco | 2× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Nero | 1× |
| Technic Axle 9 | 60485 | Grigio bluastro chiaro | 1× |
| Technic Axle 9 | 60485 | Giallo | 1× |
| Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 60581 | Trans-trasparente | 10× |
| Panel 3 x 3 x 6 Corner Convex with Curved Top | 6059 | Grigio bluastro scuro | 2× |
| Window 1 x 2 x 2 Flat Front | 60592 | Nero | 2× |
| Brick Curved 2 x 4 x 1 1/3 | 6081 | Bianco | 6× |
| Brick Curved 2 x 4 x 1 1/3 | 6081 | Nero | 5× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Rosso | 4× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Grigio bluastro chiaro | 2× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Nero | 6× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Bianco | 4× |
| Brick 1 x 10 | 6111 | Grigio bluastro chiaro | 1× |
| Brick 1 x 12 | 6112 | Bianco | 1× |
| Technic Pin 1/2 with 2L Bar Extension | 61184 | Grigio bluastro chiaro | 4× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Nero | 2× |
| Technic Beam 3 x 0.5 Liftarm with Boss and Blocked, Squared Pin Hole | 61408 | Rosso | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Grigio bluastro chiaro | 17× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Giallo | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Argento opaco | 24× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Grigio bluastro chiaro | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Nero | 16× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rosso | 9× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Trans-trasparente | 9× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Grigio bluastro scuro | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Bianco | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Nero | 11× |
| Plate Special 2 x 2 with Wheels Holder Wide | 6157 | Grigio bluastro chiaro | 2× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Bianco | 2× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Grigio bluastro chiaro | 2× |
| Technic Universal Joint 3L [Complete Assembly] | 61903 | Grigio bluastro chiaro | 1× |
| Brick Special 2 x 2 with Pin and Axle Hole | 6232 | Giallo | 6× |
| Technic Pin Connector Round [Slotted] | 62462 | Grigio bluastro chiaro | 4× |
| Technic Pin Connector Round [Slotted] | 62462 | Pearl Titanium | 2× |
| Technic Pin Connector Round [Slotted] | 62462 | Rosso | 4× |
| Brick Special 2 x 4 with Pins | 6249 | Grigio bluastro scuro | 5× |
| Tile 1 x 3 | 63864 | Grigio bluastro chiaro | 7× |
| Tile 1 x 3 | 63864 | Bianco | 2× |
| Tile 1 x 3 with Black Warning/Danger Stripes print | 63864pr0003 | Giallo | 2× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Nero | 1× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Rosso | 1× |
| Technic Link 1 x 9 Bent (6 - 4) | 64451 | Grigio bluastro scuro | 1× |
| Windscreen 1 x 6 x 3 | 64453 | Trans-trasparente | 1× |
| Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3 | 64644 | Nero | 1× |
| Technic Shock Absorber 11L with Internal Spring, Light Bluish Gray Top | 65151c01 | Oro perlato | 1× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Giallo | 4× |
| Technic Gear 12 Tooth Bevel | 6589 | Beige | 1× |
| Tile 1 x 6 with Groove | 6636 | Bianco | 15× |
| Tile 1 x 6 with Groove | 6636 | Grigio bluastro chiaro | 6× |
DNA della build
Dettagli inventario pezzi per ECTO-1
Con 2352 pezzi, questa build e +12% rispetto al set Icons medio e +430% rispetto alla media dei set del 2020.
Rispetto al set Icons medio
Set Icons medio: 2091 pezzi su 80 altri set.
Rispetto al set medio del 2020
Set medio del 2020: 444 pezzi su 450 altri set.
Profilo colori
Colore dominante
Nero
Pezzi unici
6.9 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Plate 1 x 2
132xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.


![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061032.jpg)

![Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg)
![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6037746.jpg)



