Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Bracket 1 x 2 - 1 x 4 [Rounded Corners] 10201 | Nero | 1× |
![]() Bracket 1 x 2 - 1 x 4 [Rounded Corners] 10201 | Grigio bluastro chiaro | 2× |
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Grigio bluastro scuro | 2× |
![]() Bar Holder with Clip 11090 | Oro perlato | 10× |
![]() Bar Holder with Clip 11090 | Nero | 2× |
![]() Plate 3 x 3 11212 | Grigio bluastro scuro | 2× |
![]() Technic Pin Connector Perpendicular 2 x 4 Bent - Beam with 90 Hole Ø 4.8 11455 | Nero | 2× |
![]() Technic Steering Portal with 2 Pin Holes 11950 | Oro perlato | 2× |
![]() Tile Special 1 x 1 with Clip with Rounded Tips 12825 | Nero | 4× |
![]() Tile Special 1 x 1 with Clip with Rounded Tips 12825 | Grigio bluastro scuro | 2× |
Visualizzati 10 di 301 pezzi
🔓 Registrati per vedere tutti i pezzi| Plate 3 x 3 | 11212 | Grigio bluastro scuro | 2× |
| Technic Pin Connector Perpendicular 2 x 4 Bent - Beam with 90 Hole Ø 4.8 | 11455 | Nero | 2× |
| Technic Steering Portal with 2 Pin Holes | 11950 | Oro perlato | 2× |
| Tile Special 1 x 1 with Clip with Rounded Tips | 12825 | Nero | 4× |
| Tile Special 1 x 1 with Clip with Rounded Tips | 12825 | Grigio bluastro scuro | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Oro perlato | 4× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Grigio bluastro chiaro | 4× |
| Wheel 56 x 34 Technic Racing Medium with 6 Pin Holes | 15038 | Nero | 4× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 15100 | Nero | 4× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Nero | 2× |
| Road Sign Clip-on 2 x 2 Square [Thick Open O Clip] | 15210 | Grigio bluastro scuro | 2× |
| Technic Panel 3 x 11 x 1 | 15458 | Nero | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Nero | 30× |
| Sticker Sheet 1 for Set 76023-1 | 17688 | Unknown | 1× |
| Tyre 81.6 x 44 R | 18450 | Nero | 2× |
| Sticker Sheet 2 for Set 76023-1 | 18629 | Unknown | 1× |
| Brick 2 x 2 Corner | 2357 | Nero | 6× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Trans-rosso | 1× |
| Tile Special 1 x 2 Grille with Bottom Groove | 2412b | Grigio bluastro scuro | 2× |
| Plate 2 x 2 Corner | 2420 | Nero | 2× |
| Tile 1 x 4 with Groove | 2431 | Nero | 17× |
| Tile 1 x 4 with Groove | 2431 | Grigio bluastro chiaro | 4× |
| Plate 2 x 12 | 2445 | Grigio bluastro chiaro | 2× |
| Slope Inverted 75° 2 x 1 x 3 | 2449 | Nero | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Nero | 14× |
| Brick 2 x 6 | 2456 | Nero | 8× |
| Barrel 2 x 2 x 2 | 2489 | Grigio bluastro scuro | 1× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Nero | 4× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Grigio bluastro scuro | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Grigio bluastro chiaro | 1× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Grigio bluastro scuro | 25× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Nero | 6× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Grigio bluastro chiaro | 2× |
| Technic Pin with Friction Ridges Lengthwise and Center Slots | 2780 | Nero | 100× |
| Brick Special 1 x 2 with Grille | 2877 | Nero | 12× |
| Plate Special 1 x 4 with Wheels Holder | 2926 | Nero | 2× |
| Lever Small Base with Black Lever | 298c02 | Nero | 6× |
| Brick 2 x 4 | 3001 | Nero | 7× |
| Brick 2 x 3 | 3002 | Grigio bluastro scuro | 2× |
| Brick 2 x 3 | 3002 | Nero | 9× |
| Brick 2 x 2 | 3003 | Grigio bluastro chiaro | 4× |
| Brick 2 x 2 | 3003 | Nero | 8× |
| Brick 1 x 2 | 3004 | Nero | 18× |
| Plate Special 1 x 4 with Bar Down | 30043 | Nero | 2× |
| Brick 1 x 1 | 3005 | Nero | 18× |
| Brick 1 x 1 | 3005 | Grigio bluastro scuro | 4× |
| Brick 2 x 8 | 3007 | Giallo | 2× |
| Brick 2 x 8 | 3007 | Nero | 6× |
| Brick 1 x 8 | 3008 | Nero | 2× |
| Brick 1 x 6 | 3009 | Grigio bluastro scuro | 2× |
| Brick 1 x 6 | 3009 | Nero | 2× |
| Brick 1 x 4 | 3010 | Nero | 13× |
| Brick 1 x 4 | 3010 | Grigio bluastro scuro | 2× |
| Plate 2 x 4 | 3020 | Grigio bluastro chiaro | 3× |
| Plate 2 x 4 | 3020 | Nero | 21× |
| Plate 2 x 3 | 3021 | Nero | 52× |
| Plate 2 x 3 | 3021 | Giallo | 4× |
| Plate 2 x 2 | 3022 | Grigio bluastro chiaro | 8× |
| Plate 2 x 2 | 3022 | Nero | 8× |
| Plate 1 x 2 | 3023 | Nero | 22× |
| Plate 1 x 2 | 3023 | Grigio bluastro scuro | 33× |
| Brick Special 1 x 2 with Handle | 30236 | Grigio bluastro scuro | 2× |
| Plate 1 x 1 | 3024 | Grigio bluastro chiaro | 2× |
| Plate 1 x 1 | 3024 | Nero | 22× |
| Plate 6 x 12 | 3028 | Nero | 1× |
| Plate 4 x 4 | 3031 | Nero | 1× |
| Plate 4 x 4 | 3031 | Grigio bluastro scuro | 2× |
| Plate 4 x 6 | 3032 | Grigio bluastro scuro | 2× |
| Plate 4 x 6 | 3032 | Nero | 1× |
| Plate 2 x 8 | 3034 | Nero | 10× |
| Plate 4 x 8 | 3035 | Grigio bluastro chiaro | 5× |
| Wedge Plate 6 x 12 Left | 30355 | Nero | 1× |
| Wedge Plate 6 x 12 Right | 30356 | Nero | 1× |
| Plate 6 x 8 | 3036 | Grigio bluastro chiaro | 5× |
| Slope 18° 4 x 2 | 30363 | Nero | 4× |
| Brick Round 2 x 2 Dome Top, Hollow Stud | 30367c | Grigio bluastro chiaro | 4× |
| Slope 45° 2 x 4 | 3037 | Grigio bluastro scuro | 2× |
| Slope 45° 2 x 4 | 3037 | Nero | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Oro perlato | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Grigio bluastro chiaro | 4× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Nero | 6× |
| Slope 45° 2 x 3 | 3038 | Nero | 2× |
| Wedge Sloped 2 x 16 Triple | 30382 | Nero | 4× |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | 30383 | Grigio bluastro chiaro | 2× |
| Slope 45? 2 x 2 | 3039 | Grigio bluastro chiaro | 3× |
| Slope 45? 2 x 2 | 3039 | Grigio bluastro scuro | 2× |
| Slope 45? 2 x 2 | 3039 | Nero | 4× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Nero | 22× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Nero | 6× |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends | 30552 | Nero | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth | 30553 | Nero | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth | 30553 | Grigio bluastro scuro | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Grigio bluastro chiaro | 1× |
| Tile 2 x 2 with Groove | 3068b | Grigio bluastro scuro | 6× |
| Tile 2 x 2 with Groove | 3068b | Nero | 10× |
| Tile 1 x 2 with Groove | 3069b | Grigio bluastro chiaro | 3× |
| Tile 1 x 2 with Groove | 3069b | Grigio bluastro scuro | 16× |
| Tile 1 x 2 with Groove | 3069b | Nero | 24× |
| Tile 1 x 2 with Computer Keyboard Standard Print | 3069bpr0030 | Grigio bluastro scuro | 2× |
| Tile 1 x 1 with Groove | 3070b | Nero | 2× |
| Tile 1 x 1 with Groove | 3070b | Grigio bluastro chiaro | 3× |
| Tile 1 x 1 with Groove | 3070b | Giallo | 4× |
| Tile 1 x 1 with White and Red Gauge Print | 3070bpr0007 | Grigio bluastro chiaro | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Grigio bluastro chiaro | 8× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Nero | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Grigio bluastro chiaro | 4× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Nero | 2× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Nero | 4× |
| Technic Brick 1 x 14 [13 Pin Holes] | 32018 | Nero | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Grigio bluastro scuro | 5× |
| Plate Special 1 x 2 with Door Rail | 32028 | Nero | 2× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 32054 | Grigio bluastro chiaro | 16× |
| Technic Axle 2 Notched | 32062 | Rosso | 6× |
| Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening] | 32064b | Rosso | 4× |
| Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening] | 32064b | Nero | 4× |
| Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening] | 32064b | Grigio bluastro scuro | 6× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Grigio bluastro chiaro | 8× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Nero | 2× |
| Technic Beam 1 x 15 Thick | 32278 | Nero | 2× |
| Technic Beam 1 x 5 Thick | 32316 | Grigio bluastro chiaro | 6× |
| Technic Brick 4 x 4 with 2 x 2 Opening | 32324 | Grigio bluastro chiaro | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Nero | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Giallo | 1× |
| Technic Beam 1 x 3 Thick | 32523 | Grigio bluastro chiaro | 2× |
| Technic Beam 1 x 7 Thick | 32524 | Grigio bluastro chiaro | 1× |
| Technic Beam 1 x 11 Thick | 32525 | Grigio bluastro chiaro | 2× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Nero | 2× |
| Technic Brick 6 x 8 with 4 x 6 Opening | 32532 | Nero | 10× |
| Technic Brick 5 x 5 Right Angle (1 x 4 - 1 x 4) | 32555 | Nero | 4× |
| Technic Pin Connector Perpendicular Long | 32557 | Nero | 2× |
| Slope 33° 3 x 4 | 3297 | Nero | 2× |
| Slope 33° 2 x 4 Double | 3299 | Nero | 6× |
| Plate 1 x 8 | 3460 | Grigio bluastro scuro | 4× |
| Plate 1 x 8 | 3460 | Nero | 7× |
| Plate 1 x 8 | 3460 | Grigio bluastro chiaro | 9× |
| Brick 1 x 3 | 3622 | Nero | 2× |
| Plate 1 x 3 | 3623 | Nero | 32× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Nero | 7× |
| Plate 1 x 6 | 3666 | Grigio bluastro chiaro | 2× |
| Plate 1 x 6 | 3666 | Nero | 14× |
| Slope 65° 2 x 2 x 2 with Bottom Tube | 3678b | Grigio bluastro chiaro | 2× |
| Slope 65° 2 x 2 x 2 with Bottom Tube | 3678b | Nero | 6× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Giallo | 4× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Grigio bluastro scuro | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Giallo | 2× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Grigio bluastro scuro | 2× |
| Technic Axle 12 | 3708 | Nero | 4× |
| Plate 1 x 4 | 3710 | Nero | 21× |
| Plate 1 x 4 | 3710 | Grigio bluastro scuro | 8× |
| Plate 1 x 4 | 3710 | Grigio bluastro chiaro | 4× |
| Technic Axle 10 | 3737 | Nero | 2× |
| Technic Plate 2 x 8 [7 Holes] | 3738 | Nero | 2× |
| Technic Gear Rack 1 x 4 | 3743 | Nero | 2× |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | 3747b | Nero | 2× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Beige | 2× |
| Plate Special 1 x 2 with 1 Stud without Groove (Jumper) | 3794a | Marrone | 4× |
| Plate 2 x 6 | 3795 | Nero | 8× |
| Plate 2 x 6 | 3795 | Grigio bluastro chiaro | 10× |
| Plate 2 x 10 | 3832 | Nero | 2× |
| Technic Brick 1 x 12 [11 Pin Holes] | 3895 | Nero | 7× |
| Hinge Brick 1 x 2 Base | 3937 | Nero | 2× |
| Hinge Brick 1 x 2 Base | 3937 | Grigio bluastro chiaro | 11× |
| Hinge Brick 1 x 2 Top Plate Thin | 3938 | Grigio bluastro chiaro | 1× |
| Brick Round 2 x 2 with Axle Hole | 3941 | Grigio bluastro chiaro | 16× |
| Plate 6 x 6 | 3958 | Nero | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Grigio bluastro scuro | 6× |
| Technic Beam 1 x 9 Thick | 40490 | Nero | 3× |
| Brick Special 1 x 1 with Headlight | 4070 | Nero | 10× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Grigio bluastro chiaro | 3× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Nero | 4× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Grigio bluastro scuro | 2× |
| Technic Beam 1 x 13 Thick | 41239 | Nero | 4× |
| Slope 33° 3 x 3 | 4161 | Nero | 2× |
| Tile 1 x 8 with Groove | 4162 | Nero | 6× |
| Wedge Curved 6 x 2 Right, Inner Ridges | 41747 | Nero | 1× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Nero | 1× |
| Wedge 4 x 2 Right | 41767 | Nero | 2× |
| Wedge 4 x 2 Left | 41768 | Nero | 2× |
| Wedge Plate 4 x 2 Right | 41769 | Nero | 5× |
| Wedge Plate 4 x 2 Left | 41770 | Nero | 5× |
| Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 42003 | Nero | 10× |
| Technic Pin 1/2 | 4274 | Grigio bluastro chiaro | 46× |
| Plate 2 x 16 | 4282 | Grigio bluastro chiaro | 3× |
| Plate 2 x 16 | 4282 | Nero | 2× |
| Slope 33° 3 x 1 | 4286 | Grigio bluastro scuro | 2× |
| Slope Inverted 34° 3 x 1 with Internal Stopper | 4287b | Viola scuro | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Nero | 6× |
| Wedge Plate 4 x 4 with 2 x 2 Cutout | 43719 | Nero | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Nero | 5× |
| Wedge Plate 3 x 2 Left | 43723 | Nero | 5× |
| Brick Curved 6 x 2 | 44126 | Nero | 1× |
| Technic Axle 7 | 44294 | Grigio bluastro chiaro | 2× |
| Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove | 44301b | Nero | 4× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth | 44302a | Grigio bluastro scuro | 4× |
| Slope 45° 2 x 8 | 4445 | Nero | 2× |
| Flag 2 x 2 Trapezoid with Flat Area between Clips | 44676 | Nero | 4× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Grigio bluastro scuro | 14× |
| Technic Axle 3 | 4519 | Grigio bluastro chiaro | 4× |
| Tool Hammer / Mallet Large | 4522 | Nero | 2× |
| Tap 1 x 1 without Hole in Spout | 4599b | Grigio bluastro chiaro | 4× |
| Plate Special 2 x 2 with Wheel Holders | 4600 | Nero | 2× |
| Technic Worm Gear | 4716 | Grigio bluastro chiaro | 4× |
| Bar 1 x 3 [Clip / Anti-Stud] | 4735 | Nero | 2× |
| Wedge Plate 12 x 3 Left | 47397 | Nero | 1× |
| Wedge Plate 12 x 3 Right | 47398 | Nero | 1× |
| Cone 4 x 4 x 2 Hollow No Studs | 4742 | Nero | 1× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Grigio bluastro scuro | 5× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Nero | 4× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Trans-azzurro | 1× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Nero | 4× |
| Slope Inverted 45° 4 x 2 Double | 4871 | Grigio bluastro scuro | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | 48729b | Nero | 2× |
| Technic Pin Connector Hub Perpendicular 3L with 4 Pins | 48989 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 1 with Tooth | 49668 | Nero | 20× |
| Wedge Plate 2 x 4 | 51739 | Nero | 12× |
| Arm Mechanical with Clip [Thin Support] | 53989 | Oro perlato | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 26× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Grigio bluastro chiaro | 2× |
| Wedge Plate 6 x 3 Right | 54383 | Nero | 13× |
| Wedge Plate 6 x 3 Left | 54384 | Nero | 13× |
| Technic Axle 8 with Stop | 55013 | Grigio bluastro scuro | 2× |
| Technic Pin Connector Hub Perpendicular 3 x 3 Bent with 4 Pins (Pin Ridges Across Part) | 55615 | Grigio bluastro chiaro | 2× |
| Wheel 43.2 x 26 Technic Racing Small with 6 Pinholes | 56908 | Nero | 2× |
| Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | 57909b | Grigio bluastro scuro | 2× |
| Panel 1 x 6 x 5 | 59349 | Trans-trasparente | 2× |
| Brick Arch 1 x 3 x 2 Curved Top | 6005 | Nero | 20× |
| Wheel 31 x 15 Technic, 7 Pin Holes | 60208 | Grigio bluastro scuro | 4× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Grigio bluastro chiaro | 4× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Nero | 8× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Grigio bluastro chiaro | 19× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Nero | 14× |
| Plate 1 x 12 | 60479 | Grigio bluastro chiaro | 2× |
| Plate 1 x 12 | 60479 | Nero | 6× |
| Slope 65° 2 x 1 x 2 | 60481 | Nero | 2× |
| Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 60581 | Trans-trasparente | 2× |
| Window 1 x 4 x 3 without Shutter Tabs | 60594 | Nero | 4× |
| Bar 12L with Open Stud, Towball, and Top Slit [Boat Mast] | 6076 | Nero | 2× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Nero | 4× |
| Wedge Plate 6 x 6 Cut Corner | 6106 | Nero | 2× |
| Brick 1 x 10 | 6111 | Grigio bluastro scuro | 2× |
| Brick 1 x 10 | 6111 | Nero | 6× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Nero | 4× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Grigio bluastro scuro | 2× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Grigio bluastro chiaro | 4× |
| Hinge Brick 2 x 2 Top Plate Thin | 6134 | Nero | 8× |
| Bar 1 x 6 [Closed Studs] | 6140 | Nero | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Grigio bluastro chiaro | 2× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Nero | 2× |
| Plate Special 4 x 6 with Studs on 3 Edges | 6180 | Nero | 4× |
| Bar 1 x 4 x 2 | 6187 | Nero | 1× |
| Panel 1 x 1 x 1 Corner | 6231 | Nero | 2× |
| Technic Pin Connector Round [Slotted] | 62462 | Marrone rossastro | 2× |
| Technic Pin Connector Round [Slotted] | 62462 | Nero | 14× |
| Tile 1 x 3 | 63864 | Giallo | 2× |
| Tile 1 x 3 | 63864 | Nero | 18× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Grigio bluastro chiaro | 6× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Nero | 8× |
| Bar 6L with Stop Ring | 63965 | Nero | 4× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Nero | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Grigio bluastro scuro | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots | 6558 | Nero | 36× |
| Technic Axle 3 with Stud | 6587 | Beige scuro | 6× |
| Technic Beam 1 x 9 Bent (6 - 4) Thick | 6629 | Nero | 4× |
| Technic Beam 1 x 3 Thin | 6632 | Grigio bluastro scuro | 8× |
| Tile 1 x 6 with Groove | 6636 | Nero | 17× |
| Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly] | 73983 | Grigio bluastro scuro | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Nero | 45× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Grigio bluastro scuro | 28× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Grigio bluastro chiaro | 1× |
| Tile 2 x 4 with Groove | 87079 | Nero | 24× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Big Squared Pin Holes] | 87082 | Nero | 12× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Nero | 2× |
| Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 87544 | Trans-trasparente | 2× |
| Aircraft Fuselage Curved Aft Section 6 x 10 Top | 87615 | Nero | 2× |
| Bar 3L | 87994 | Oro perlato | 6× |
| Bar 3L | 87994 | Nero | 2× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Nero | 10× |
| Brick Round Corner 3 x 3 x 2 Dome Top | 88293 | Nero | 2× |
| Tile 8 x 16 with Bottom Tubes | 90498 | Nero | 1× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole | 92013 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 2 [Top Clip] | 92280 | Nero | 10× |
| Plate Special 1 x 2 [Top Clip] | 92280 | Grigio bluastro chiaro | 1× |
| Plate Special 1 x 4 with 2 Studs | 92593 | Nero | 9× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Oro perlato | 4× |
| Technic Steering Portal Axle Housing | 92908 | Grigio bluastro chiaro | 2× |
| Technic Steering Hub for Portal Axle | 92909 | Grigio bluastro scuro | 4× |
| Tyre 94.3 x 38 R | 92912 | Nero | 4× |
| Brick and Axle Separator v2.0 | 96874 | Arancione | 1× |
| Tile Round 1 x 1 | 98138 | Grigio bluastro chiaro | 2× |
| Tile Round 1 x 1 | 98138 | Trans-trasparente | 8× |
| Weapon Batarang | 98721 | Nero | 1× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Nero | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Grigio bluastro chiaro | 6× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Nero | 3× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Nero | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Grigio bluastro chiaro | 2× |
DNA della build
Dettagli inventario pezzi per The Tumbler
Con 1869 pezzi, questa build e +159% rispetto al set Batman medio e +592% rispetto alla media dei set del 2014.
Rispetto al set Batman medio
Set Batman medio: 723 pezzi su 40 altri set.
Rispetto al set medio del 2014
Set medio del 2014: 270 pezzi su 435 altri set.
Profilo colori
Colore dominante
Nero
Pezzi unici
7.9 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Technic Pin with Friction Ridges Lengthwise and Center Slots
100xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.



![Bracket 1 x 2 - 1 x 4 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6089577.jpg)
![Bracket 1 x 2 - 1 x 4 [Rounded Corners]](https://cdn.rebrickable.com/media/parts/elements/6014615.jpg)
![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6047417.jpg)






