


LEGO NINJAGO Lloyd's Legendarische Draak (71766) bouwt een luchtgevecht met zijn 747 onderdelen. Deze beweegbare draak is te upgraden met een zadel en heeft aanvalsvleugels die naar voren en achteren bewegen voor dynamisch spel. Lloyd, gewapend met zijn zwaard en een capuchon-accessoire, confronteert de tegenstanders. Nya ondersteunt hem met een speer, terwijl Viper Flyer van bovenaf aanvalt met een jetpack en zwaard. Python Dynamite zet een dynamietstaaf en zijn ballistaschieter in, allen strijdend om de missie-bannerbeloning.
Onderdelen inventaris
| Onderdeel | Kleur | Aantal |
|---|---|---|
![]() Weapon Sword (Uruk-hai) 10050 | Pearl Titanium | 1× |
![]() Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] 11153 | Donkerblauw | 4× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Lichtblauwgrijs | 2× |
![]() Wedge Curved 3 x 4 x 2/3 Cutout 11291 | Helder groen | 2× |
![]() Plate Special 1 x 2 with Clip Horizontal on Side 11476 | Roodbruin | 3× |
![]() Slope Curved 2 x 1 No Studs [1/2 Bow] 11477 | Lichtblauwgrijs | 6× |
![]() Slope Curved 4 x 1 Inverted 13547 | Donkerblauw | 2× |
![]() Plate Special 1 x 2 5.9mm Towball Socket 14418 | Lichtblauwgrijs | 2× |
![]() Plate Special 1 x 2 with 5.9mm Towball Socket and Towball 14419 | Donkerblauwgrijs | 3× |
![]() Plate Special 1 x 2 5.9mm Centre Side Towball Socket 14704 | Lichtblauwgrijs | 3× |
10 van 240 onderdelen getoond
🔓 Meld je aan om alle onderdelen te zien| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Lichtblauwgrijs | 6× |
| Slope Curved 4 x 1 Inverted | 13547 | Donkerblauw | 2× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Lichtblauwgrijs | 2× |
| Plate Special 1 x 2 with 5.9mm Towball Socket and Towball | 14419 | Donkerblauwgrijs | 3× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Lichtblauwgrijs | 3× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Lichtblauwgrijs | 6× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Donkerblauwgrijs | 2× |
| Projectile, Spring Shooter Ammunition 8L Bar | 15303 | Trans-Bright Green | 2× |
| Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | 15400 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Helder groen | 6× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Donkerblauw | 3× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Medium azuur | 5× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Donkerblauw | 2× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Lichtblauwgrijs | 4× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Parel goud | 4× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Rood | 1× |
| Creature Body Part, Barb Large (Claw, Talon) with Clip | 16770 | Parel goud | 4× |
| Technic Brick Special 2 x 2 with 10.2mm Balls with Holes and Axle Hole | 17114 | Donkerblauwgrijs | 1× |
| Weapon Harpoon [Smooth Shaft] | 18041 | Parel goud | 1× |
| Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 18653 | Donkerblauw | 2× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Zwart | 2× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Donkerblauw | 2× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Mat zilver | 1× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Limoen | 1× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Medium azuur | 1× |
| Tile Special 2 x 3 Pentagonal | 22385 | Donkerblauw | 2× |
| Tile Special 2 x 3 Pentagonal | 22385 | Lichtblauwgrijs | 4× |
| Slope 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid] | 22388 | Helder groen | 5× |
| Plate 2 x 2 Corner | 2420 | Donkerblauw | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Zandgroen | 2× |
| Wedge Plate 2 x 2 Left | 24299 | Medium azuur | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Medium azuur | 1× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Donkerblauw | 2× |
| Weapon Sword / Saber with Curved Blade and Hilt | 25111 | Mat zilver | 1× |
| Tile Round 1 x 1 Quarter | 25269 | Donkerblauwgrijs | 4× |
| Tile Round 1 x 1 Quarter | 25269 | Helder groen | 4× |
| Tile Round 1 x 1 Quarter | 25269 | Lichtblauwgrijs | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Donkerblauw | 1× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Parel goud | 4× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Wit | 12× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Donkerblauw | 1× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Parel goud | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Donkerblauw | 24× |
| Tile 2 x 3 with Flying Shuriken on Dark Turquoise Background print | 26603pr9995 | Rood | 1× |
| Technic Axle Towball | 2736 | Lichtblauwgrijs | 1× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Donkerblauwgrijs | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Donkerblauwgrijs | 3× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Donkerblauw | 2× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Zwart | 12× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Donkerblauw | 7× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Lichtblauwgrijs | 1× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Medium azuur | 4× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Wit | 6× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Medium azuur | 4× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Lichtblauwgrijs | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Donkerblauw | 7× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Wit | 6× |
| Plate Special 1 x 4 with Bar Down | 30043 | Zwart | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Donkerblauwgrijs | 4× |
| Plate Special / Shield Rectangular with 4 Studs, Handle | 30166 | Donkerblauwgrijs | 1× |
| Plate 2 x 4 | 3020 | Medium azuur | 4× |
| Plate 2 x 4 | 3020 | Roodbruin | 1× |
| Plate 2 x 3 | 3021 | Donkerblauw | 9× |
| Plate 2 x 3 | 3021 | Lichtblauwgrijs | 3× |
| Plate 2 x 3 | 3021 | Donkerrood | 1× |
| Plate 2 x 2 | 3022 | Donkerblauw | 2× |
| Plate 1 x 2 | 3023 | Donkerblauw | 11× |
| Plate 1 x 2 | 3023 | Helder licht oranje | 2× |
| Plate 1 x 2 | 3023 | Lichtblauwgrijs | 2× |
| Plate 1 x 2 | 3023 | Medium azuur | 14× |
| Plate 1 x 2 | 3023 | Rood | 4× |
| Plate 1 x 2 | 3023 | Oranje | 2× |
| Plate 1 x 2 | 3023 | Helder groen | 4× |
| Plate 1 x 1 | 3024 | Donkerblauw | 4× |
| Plate 1 x 1 | 3024 | Lichtblauwgrijs | 15× |
| Plate 4 x 4 | 3031 | Donkerblauw | 1× |
| Plate 2 x 8 | 3034 | Zwart | 1× |
| Hinge Plate 1 x 2 Locking with 1 Finger On Top | 30383 | Donkerblauwgrijs | 1× |
| Brick Round 1 x 1 Open Stud | 3062b | Donkerblauw | 6× |
| Tile 2 x 2 with Groove | 3068b | Donkerblauw | 2× |
| Tile 1 x 2 with Groove | 3069b | Donkerblauw | 4× |
| Tile 1 x 2 with Groove | 3069b | Helder groen | 1× |
| Tile 1 x 1 with Groove | 3070b | Helder groen | 4× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Zwart | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Zwart | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Zandgroen | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Donkerblauwgrijs | 6× |
| Technic Axle and Pin Connector Angled #5 - 112.5° | 32015 | Zwart | 8× |
| Technic Axle and Pin Connector Angled #3 - 157.5? | 32016 | Donkergroen | 10× |
| Plate Special 1 x 2 with Door Rail | 32028 | Donkerblauw | 3× |
| Technic Axle 2 Notched | 32062 | Rood | 6× |
| Technic Axle 2 Notched | 32062 | Zwart | 6× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Lichtblauwgrijs | 8× |
| Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 32124 | Roodbruin | 1× |
| Technic Axle and Pin Connector Perpendicular Double | 32291 | Zwart | 2× |
| Technic Beam 1 x 7 Thick | 32524 | Zwart | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Zwart | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Parel goud | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Donkerrood | 1× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Zwart | 2× |
| Plate Special 4 x 4 with 3 x 3 Quarter Round Cutout | 35044 | Helder groen | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Lichtblauwgrijs | 2× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Helder groen | 2× |
| Plate 1 x 3 | 3623 | Lichtblauwgrijs | 2× |
| Plate 1 x 3 | 3623 | Donkerblauw | 2× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Donkerblauw | 1× |
| Slope Inverted 45° 2 x 1 | 3665 | Donkerblauw | 3× |
| Plate 1 x 6 | 3666 | Lichtblauwgrijs | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Roodbruin | 6× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Donkerblauw | 2× |
| Technic Axle 6 | 3706 | Zwart | 10× |
| Plate 1 x 4 | 3710 | Medium azuur | 4× |
| Technic Axle 10 | 3737 | Zwart | 2× |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | 3747b | Roodbruin | 1× |
| Plate 2 x 6 | 3795 | Lichtblauwgrijs | 1× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Zwart | 2× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Medium azuur | 11× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Rood | 1× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Helder groen | 2× |
| Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | 40379 | Rood | 2× |
| Wrap with Long Back Knot, Lime Band Pattern | 40925pat0012 | Lichtblauwgrijs | 1× |
| Minifig Neckwear Shoulder Guard | 41162 | Pearl Titanium | 1× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Donkerblauw | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Roodbruin | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Donkerblauwgrijs | 4× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Zwart | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Donkergroen | 4× |
| Technic Pin 1/2 | 4274 | Lichtblauwgrijs | 4× |
| Slope 33° 3 x 1 | 4286 | Donkerblauw | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 8× |
| Wedge Curved 6 x 4 Triple | 43712 | Lichtblauwgrijs | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Lichtblauwgrijs | 1× |
| Wedge Plate 3 x 2 Right | 43722 | Donkerblauw | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Donkerblauw | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Lichtblauwgrijs | 1× |
| Technic Rotation Joint Disk with Pin Hole and 3L Beam Thick | 44224 | Donkerblauwgrijs | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Lichtblauwgrijs | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Donkerblauw | 3× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Zwart | 4× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Donkerblauwgrijs | 6× |
| Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 47458 | Parel goud | 2× |
| Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 47458 | Zwart | 2× |
| Wheel Arch, Curved Wedge 4 x 3 with 2 x 2 Opening and 4 Studs | 47755 | Donkerblauw | 1× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Donkerblauwgrijs | 2× |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] | 48171 | Zwart | 2× |
| Technic Brick Special 2 x 2 with Pin Hole, with 2 Rotation Joint Sockets | 48172 | Zwart | 1× |
| Slope Inverted 45° 4 x 2 Double | 4871 | Zwart | 1× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] | 48729b | Donkerblauwgrijs | 1× |
| Technic Plate Rotor 3 Blade with Smooth Ends, 6 Studs, 1 Bottom Ridge (Propeller) | 51138 | Donkerbruin | 1× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | 53451 | Parel goud | 6× |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 53540 | Wit | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Lichtblauwgrijs | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Donkerblauw | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Lichtblauwgrijs | 1× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Lichtblauwgrijs | 2× |
| Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | 57909b | Donkerblauwgrijs | 4× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Zwart | 7× |
| Cone 1 x 1 [Top Groove] | 59900 | Zwart | 8× |
| Brick Arch 1 x 3 x 2 Curved Top | 6005 | Helder groen | 2× |
| Brick Arch 1 x 3 x 2 Curved Top | 6005 | Zwart | 2× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Donkerblauwgrijs | 1× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Rood | 1× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Zwart | 1× |
| Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 61252 | Zwart | 4× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Zwart | 14× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Donkerblauw | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Donkerblauw | 10× |
| Tile 1 x 3 | 63864 | Medium azuur | 2× |
| Technic Axle and Pin Connector Perpendicular Triple | 63869 | Zwart | 2× |
| Bar 6L with Stop Ring | 63965 | Parel goud | 1× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Parel goud | 1× |
| Equipment Dynamite Sticks | 64728 | Rood | 2× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Parel goud | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Donkerblauwgrijs | 2× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Donkerblauwgrijs | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Donkerblauwgrijs | 2× |
| Technic Axle 3 with Stud | 6587 | Donker zandkleur | 4× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Zwart | 18× |
| Plate Special 2 x 2 with Wheel Holders with Cross (+) Slots on Pins | 67687 | Zwart | 3× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Donkerblauwgrijs | 2× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Zwart | 4× |
| Creature Body Part, Dragon Head Upper Jaw with White Teeth Print | 72362pr0004 | Donkerblauw | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Lichtblauwgrijs | 2× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Zandgroen | 4× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Zwart | 1× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Roodbruin | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Zwart | 6× |
| Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder | 76766 | Zwart | 1× |
| Fin Jagged with Axle Hole | 76919 | Parel goud | 2× |
| Creature Body Part, Dragon Head Lower Jaw with 6 Studs on Top, Spike, Dark Green Markings, Yellow Eye, White Teeth print | 76923pr0002 | Helder groen | 1× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Zwart | 6× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Lichtblauwgrijs | 6× |
| Technic Rotation Joint Disk with Pin and Double Rotation Joint Ball Half | 79505 | Zwart | 2× |
| Plate Special 1 x 3 with 2 Clips on Top | 79987 | Donkerblauwgrijs | 3× |
| Sticker Sheet for Set 71766-1 | 82235 | Unknown | 1× |
| Wing, Left, Dragon, Azure Bones, Green and Dark Green Webbing | 82253 | Unknown | 1× |
| Wing, Right, Dragon, Azure Bones, Green/Dark Green Webbing | 82254 | Unknown | 1× |
| Plate Round 1 x 1 with Open Stud | 85861 | Parel goud | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Medium azuur | 1× |
| Brick Round Corner 6 x 6 x 2 | 87559 | Donkerblauw | 2× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Rood | 1× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Zwart | 3× |
| Brick Round Corner 3 x 3 x 2 Dome Top | 88293 | Donkerblauw | 4× |
| Plate 2 x 14 | 91988 | Donkerblauw | 1× |
| Large Figure Weapon Claw, with Clip | 92220 | Parel goud | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Roodbruin | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Lichtblauwgrijs | 1× |
| Slope Curved 4 x 2 No Studs | 93606 | Lichtblauwgrijs | 4× |
| Brick and Axle Separator v2.0 | 96874 | Rood | 1× |
| Propeller 1 Blade 2 x 16 with Axle | 98135 | Parel goud | 1× |
| Arm Mechanical with Clip [Thick Support] | 98313 | Zwart | 1× |
| Vehicle Body, Wheel Arch / Mudguard 3 x 4 x 1 2/3 Low Profile, Curved Front | 98835 | Helder groen | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised | 99206 | Zandgroen | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Zwart | 3× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Pearl Titanium | 1× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Zwart | 14× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Donkerblauwgrijs | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Donkerblauw | 5× |
| Hair Swept Back, Tan with Headband Pattern | 69562pat0001 | Lichtblauwgrijs | 1× |
| Torso, Odd Arms, Robe, Lime Scales, White Belt Dark Green Trim print, Left Lime Arm, Right Dark Green Arm, Green Hands | 973e109pr0001 | Lichtblauwgrijs | 1× |
| Hips and Olive Green Legs with Green Robe White Knee Robes print | 970c20pr9769 | Olive Green | 1× |
| Minifig Head Lloyd, Reddish Brown Eyebrows, Green Eyes, Lopsided Open Mouth Grin / Gritted Teeth Print | 3626cpr2255 | Geel | 1× |
| Hips and Dark Bluish Gray Legs with Pearl Titanium Robe, Dark Azure Decorations, White Knee Wraps Print | 970c12pr9764 | Donkerblauwgrijs | 1× |
| Torso, Odd Arms, Robe, White Symbol, Medium Azure Shirt Print, Left Dark Azure Arm, Right Pearl Titanium Arm, Dark Azure Hands | 973e111pr5886 | Pearl Titanium | 1× |
| Wrap with Long Back Knot, Dark Azure Band Pattern | 40925pat0005 | Pearl Titanium | 1× |
| Minifig Head Nya, Eyebrows, Beauty Mark, Dark Tan Lips, Crooked Smile / Open Mouth Smile Print | 3626cpr9888 | Geel | 1× |
| Legs Short | 41879a | Zwart | 1× |
| Torso Armour, Silver Pendant print, Pearl Dark Gray Arms, Orange Hands | 973c47h34pr0001 | Oranje | 1× |
| Minifig Head Special, Snake with Orange Flames, Eyes | 49588pat0004 | Pearl Titanium | 1× |
| Minifig Neckwear Backplate with 4 Bars | 36452 | Zwart | 1× |
| Weapon Spike Flexible 3.5L | 64727 | Zwart | 4× |
| Bar Holder with Clip | 11090 | Donkerblauwgrijs | 4× |
| Hips and Orange Legs with Dark Orange Belt, Dark Turquoise Decoration print | 970c34pr0001 | Olive Green | 1× |
| Minifig Head Special, Snake with Pearl Titanium Flames, Eyes Pattern | 49588pat0003 | Oranje | 1× |
| Torso Armor, Skull, Straps, Orange Scales print, Orange Arms, Dark Bluish Gray Hands | 973c34h12pr0002 | Pearl Titanium | 1× |
Bouw-DNA
Onderdeleninzichten voor Lloyd's Legendary Dragon
Met 747 onderdelen zit deze build +63% ten opzichte van de gemiddelde Ninjago set en +29% ten opzichte van de gemiddelde release uit 2022.
T.o.v. gemiddelde Ninjago set
Gemiddelde Ninjago set: 458 onderdelen over 408 andere sets.
T.o.v. gemiddelde set uit 2022
Gemiddelde set uit 2022: 580 onderdelen over 467 andere sets.
Kleurprofiel
Dominante kleur
Zwart
Unieke onderdelen
3.9 onderdelen per uniek type
Herhalingsfactor
Gemiddeld aantal onderdelen per uniek type.
Meest gebruikte onderdeel
Plate 1 x 2
39xResultaten zijn gebaseerd op officiële LEGO onderdelen inventarissen. Nauwkeurigheid verbetert naarmate je set compleetheid bevestigt.
Deze site is niet gelieerd aan of goedgekeurd door de LEGO Groep.

![Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]](https://cdn.rebrickable.com/media/parts/elements/6042956.jpg)



![Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6047426.jpg)



