


LEGO NINJAGO 71860-1 Lloyd's Titan Mech 15th Anniversary celebra los 15 anos de LEGO NINJAGO con una version actualizada del Titan Robot de Lloyd. Lloyd y Grimfax dan identidad a la escena, mientras que la figura coleccionable del Maestro del Hielo suma un detalle especial de aniversario. La gran figura de accion tiene alas, piernas, pies, brazos y hombros articulados para crear poses de combate o un modelo de exposicion dinamico. Las 3 minifiguras completan el robot aniversario para jugar y exponer.
Inventario de piezas
| Pieza | Color | Cant. |
|---|---|---|
![]() Plate 2 x 6 3795 | Negro | 2× |
![]() Brick Special 1 x 1 with Headlight 4070 | Negro | 8× |
![]() Plate Round 1 x 1 with Solid Stud 6141 | Negro | 4× |
![]() Technic Brick 1 x 2 [2 Pin Holes] 32000 | Negro | 5× |
![]() Slope Inverted 45° 4 x 2 Double 4871 | Negro | 4× |
![]() Plate Special 1 x 2 [Side Handle Closed Ends] 48336 | Negro | 4× |
![]() Plate Round 4 x 4 with Pin Hole 60474 | Negro | 2× |
![]() Slope 30? 1 x 2 x 2/3 85984 | Negro | 4× |
![]() Brick Round 2 x 2 Truncated Cone 98100 | Negro | 1× |
![]() Bracket 1 x 2 - 2 x 2 Inverted 99207 | Negro | 12× |
Mostrando 10 de 301 piezas
🔓 Regístrate para ver todas las piezas| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Negro | 4× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Negro | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Negro | 4× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Negro | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Negro | 12× |
| Slope Curved 4 x 1 Inverted | 13547 | Negro | 3× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Negro | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Negro | 2× |
| Plate 3 x 3 Cross | 15397 | Negro | 1× |
| Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 26599 | Negro | 2× |
| WALL DOUBLE CORNER 1X2X1 | 35391 | Negro | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Negro | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Negro | 1× |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 53540 | Negro | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Negro | 8× |
| Tile Special 2 x 3 with 2 Clips without Tab between Clips | 65886 | Negro | 2× |
| Technic Rotation Joint Disk with Pin and Double Rotation Joint Ball Half | 79505 | Negro | 6× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Negro | 1× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Negro | 4× |
| Plate 3 x 3 Corner | 77844 | Negro | 2× |
| PLATE 2X2 W. BALL | 3768 | Negro | 2× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Negro | 1× |
| Bracket 5 x 1 x 1 1/3 | 5712 | Negro | 6× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Negro | 2× |
| Technic Axle 4 | 3705 | Negro | 5× |
| Technic Ball Joint with Through Axle Hole | 53585 | Negro | 8× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Negro | 6× |
| Rubber Technic Tread Attachment | 24375 | Negro | 10× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Negro | 12× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Negro | 6× |
| TECHNIC LEVER 2M | 44862 | Negro | 4× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Negro | 2× |
| Technic Steering Arm 3 x 1 with Towball Socket | 5997 | Negro | 2× |
| Plate 1 x 2 | 3023 | Beige | 15× |
| Brick 2 x 2 | 3003 | Beige | 4× |
| Plate 2 x 4 | 3020 | Beige | 4× |
| ROUND BRICK 1X1 | 3062 | Beige | 2× |
| Brick Special 1 x 1 with Headlight | 4070 | Beige | 6× |
| Plate 1 x 6 | 3666 | Beige | 2× |
| FLAT TILE 2X2 | 3068 | Beige | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Beige | 1× |
| FOOT, PLATE | 18971 | Beige | 1× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Beige | 1× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Beige | 2× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Beige | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Negro | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Negro | 2× |
| ELEMENT SEPARATOR | 31510 | Naranja | 1× |
| Brick 1 x 1 | 3005 | Rojo | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Rojo | 2× |
| Plate 4 x 4 | 3031 | Rojo | 3× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Rojo | 6× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Rojo | 2× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Rojo | 5× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Rojo | 4× |
| Tile Round 1 x 2 Half Circle | 1748 | Rojo | 4× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Rojo | 4× |
| Technic Axle 2 Notched | 32062 | Rojo | 21× |
| Technic Axle 6 | 3706 | Rojo | 2× |
| BUSH FOR CROSS AXLE | 42798 | Rojo | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Rojo | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Rojo | 1× |
| TECHNIC LEVER 2M | 44862 | Rojo | 4× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Rojo | 1× |
| MINI HEAD, NO. 2255 | 33869 | Amarillo | 1× |
| Brick 2 x 2 | 3003 | Verde arena | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Verde arena | 3× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Gris azulado oscuro | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Gris azulado oscuro | 2× |
| FLAT TILE 1X1 | 3070 | Gris azulado oscuro | 8× |
| Plate 2 x 3 | 3021 | Gris azulado oscuro | 4× |
| Plate 2 x 4 | 3020 | Gris azulado oscuro | 4× |
| Slope Inverted 45° 2 x 1 | 3665 | Gris azulado oscuro | 4× |
| Brick 2 x 3 | 3002 | Gris azulado oscuro | 4× |
| Plate 1 x 3 | 3623 | Gris azulado oscuro | 6× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Gris azulado oscuro | 1× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Gris azulado oscuro | 7× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Gris azulado oscuro | 2× |
| BRICK 2X2 W/ BALL Ø 10.2 | 57909 | Gris azulado oscuro | 4× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Gris azulado oscuro | 12× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Gris azulado oscuro | 6× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Gris azulado oscuro | 4× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Gris azulado oscuro | 18× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Gris azulado oscuro | 6× |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Gris azulado oscuro | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Gris azulado oscuro | 8× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Gris azulado oscuro | 2× |
| STICK 6M W/FLANGE | 28921 | Gris azulado oscuro | 1× |
| Slope Inverted 45° 4 x 1 Double with 1 x 2 Recessed | 32802 | Gris azulado oscuro | 2× |
| Tile 2 x 3 | 26603 | Gris azulado oscuro | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Gris azulado oscuro | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Gris azulado oscuro | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Gris azulado oscuro | 12× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Gris azulado oscuro | 7× |
| PLATE 1X2 W/STUB/ALONG/UPPER P | 53922 | Gris azulado oscuro | 1× |
| BAD ROBOT ARM | 49753 | Gris azulado oscuro | 4× |
| FLAT TILE 1X1, ROUND | 35381 | Gris azulado oscuro | 4× |
| FLAT TILE 1X2, NO. 276 | 66894 | Gris azulado oscuro | 2× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Gris azulado oscuro | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Gris azulado oscuro | 3× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Gris azulado oscuro | 8× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Gris azulado oscuro | 2× |
| 3.2 SHAFT W/ 5.9 BALL | 67692 | Gris azulado oscuro | 1× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Gris azulado oscuro | 6× |
| Brick Special 1 x 2 x 1 1/3 with Rotation Joint Socket | 80431 | Gris azulado oscuro | 3× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Gris azulado oscuro | 4× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Gris azulado oscuro | 7× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Gris azulado oscuro | 2× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Gris azulado oscuro | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Gris azulado oscuro | 2× |
| Technic Cam | 6575 | Gris azulado oscuro | 4× |
| Technic Beam 1 x 2 with Ball Joint Angled | 50923 | Gris azulado oscuro | 6× |
| Technic Axle 8 with Stop | 55013 | Gris azulado oscuro | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Gris azulado oscuro | 1× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Gris azulado oscuro | 1× |
| DOUBLE CROSS BLOCK | 42142 | Gris azulado oscuro | 2× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Gris azulado oscuro | 6× |
| Rotation Joint Socket with 2 Pins | 80563 | Gris azulado oscuro | 6× |
| Technic Pin 1/2 with Friction | 89678 | Gris azulado oscuro | 2× |
| Plate 2 x 2 | 3022 | Negro | 1× |
| Brick 1 x 1 | 3005 | Gris azulado claro | 9× |
| Plate 2 x 3 | 3021 | Gris azulado claro | 16× |
| Plate 2 x 8 | 3034 | Gris azulado claro | 4× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Gris azulado claro | 4× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Gris azulado claro | 4× |
| Plate 1 x 4 | 3710 | Gris azulado claro | 6× |
| Brick Special 1 x 2 x 2/3 with Studs on Sides | 4595 | Gris azulado claro | 1× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Gris azulado claro | 1× |
| Plate 4 x 4 | 3031 | Gris azulado claro | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Gris azulado claro | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Gris azulado claro | 4× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Gris azulado claro | 1× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Gris azulado claro | 4× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Gris azulado claro | 2× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Gris azulado claro | 1× |
| BRICK 1X1 W. HANDLE | 28917 | Gris azulado claro | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Gris azulado claro | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Gris azulado claro | 8× |
| FLAT TILE 1X1, ROUND | 35381 | Gris azulado claro | 2× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Gris azulado claro | 2× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Gris azulado claro | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Gris azulado claro | 4× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Gris azulado claro | 16× |
| Plate 1 x 5 | 78329 | Gris azulado claro | 2× |
| Plate 2 x 3 with 1 x 1 Cutout | 73831 | Gris azulado claro | 4× |
| Brick Round 4 x 4 Dome Top with Round 2 x 2 Recessed, 4 Studs | 79850 | Gris azulado claro | 4× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Gris azulado claro | 1× |
| WEAPON BARREL | 31511 | Gris azulado claro | 2× |
| 1/2 BUSH | 42136 | Gris azulado claro | 6× |
| CROSS BLOCK/FORM 2X2X2 | 42193 | Gris azulado claro | 5× |
| TECHNIC LEVER 2M | 44862 | Gris azulado claro | 1× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Gris azulado claro | 2× |
| Technic Axle 3 with Stop | 24316 | Marrón rojizo | 2× |
| Technic Axle 5 with Stop | 15462 | Marrón rojizo | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Negro | 7× |
| Plate 1 x 2 | 3023 | Negro | 29× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Negro | 8× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Negro | 4× |
| Slope 45? 2 x 2 | 3039 | Negro | 8× |
| ROOF TILE 1X2/45° | 3040 | Negro | 7× |
| Plate 1 x 6 | 3666 | Negro | 2× |
| Plate 1 x 4 | 3710 | Negro | 10× |
| Plate 2 x 3 | 3021 | Negro | 4× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Negro | 5× |
| Tile 1 x 3 | 63864 | Negro | 13× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Negro | 9× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Negro | 9× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Negro | 2× |
| Plate 2 x 4 | 3020 | Negro | 8× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Negro | 14× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Negro | 8× |
| Tile Round 1 x 1 Quarter | 25269 | Negro | 6× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Negro | 10× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Negro | 2× |
| TILE 4X4, W/ BOW, NO. 5 | 3477 | Negro | 8× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Negro | 4× |
| MOP HEAD NO. 1 | 7722 | Negro | 1× |
| Plate 2 x 2 Corner | 2420 | Beige oscuro | 16× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Beige oscuro | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Beige oscuro | 8× |
| CROSSAXLE 3M WITH KNOB | 13670 | Beige oscuro | 2× |
| AXE HEAD W HOLE Ø 3.2 | 79805 | Silver Metallic | 2× |
| Fric. element, cylinder | 65443 | Silver Metallic | 2× |
| Plate Round 1 x 1 with Hollow Stud and Bar on Underside - Long Space | 79194 | Trans-transparente | 1× |
| ROCK CRYSTAL, TRANSPARENT | 28623 | Trans-verde neón | 1× |
| PYRAMID RIDGED TILE 1X1X2/3 | 35343 | Trans-verde neón | 2× |
| Radiator Grille 1x2 | 2412 | Medium Lime | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Amarillo | 6× |
| Cone 1 x 1 [Top Groove] | 59900 | Amarillo | 4× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Amarillo | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Amarillo | 4× |
| Brick Special 1 x 1 with Scroll with Open Stud | 20310 | Oro perla | 2× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Lima | 2× |
| FROG | 28841 | Medium Lime | 1× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Medium Lime | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Medium Lime | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Amarillo | 2× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Amarillo | 12× |
| Plate 1 x 2 | 3023 | Amarillo | 2× |
| Weapon Sword Hilt with Dragon Head | 36017 | Oro perla | 2× |
| BAD ROBOT ARM | 49753 | Medium Lime | 6× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Medium Lime | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Oro perla | 1× |
| Fin Jagged with Axle Hole | 76919 | Oro perla | 3× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Medium Lime | 3× |
| Plate 2 x 2 | 3022 | Amarillo | 6× |
| Brick Round Corner 3 x 3 x 1 No Studs | 65617 | Amarillo | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Naranja claro brillante | 2× |
| PLATE W. BOWS 2X1½ | 81300 | Medium Lime | 4× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Amarillo | 6× |
| MINI HAT, NO. 19 | 3616 | Medium Lime | 6× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Amarillo | 8× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Oro perla | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Amarillo | 12× |
| Chain 2L with Bars | 6981 | Oro perla | 1× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Amarillo | 2× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Medium Lime | 1× |
| T-PIECE | 4697 | Medium Lime | 2× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Lima | 1× |
| Wedge Plate 3 x 6 Cut Corners | 2419 | Blanco | 2× |
| Tile 1 x 4 with Groove | 2431 | Blanco | 3× |
| FLAT TILE 1X2 | 3069 | Blanco | 4× |
| Plate 1 x 3 | 3623 | Blanco | 1× |
| Slope Inverted 45° 2 x 1 | 3665 | Blanco | 1× |
| Plate 1 x 6 | 3666 | Blanco | 8× |
| Plate 2 x 10 | 3832 | Blanco | 2× |
| PLATE 2X2 ROUND | 4032 | Blanco | 4× |
| ROOF TILE 1X3/25° INV. | 4287 | Blanco | 4× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Blanco | 2× |
| ROOF TILE 1X2/45° | 3040 | Blanco | 2× |
| Wedge Plate 6 x 12 Right | 30356 | Blanco | 1× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Blanco | 2× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Blanco | 4× |
| BRICK 2X6 | 44237 | Blanco | 2× |
| Slope Curved 3 x 1 No Studs | 50950 | Blanco | 3× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Blanco | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Blanco | 5× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Blanco | 4× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Blanco | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Blanco | 7× |
| Slope Curved 4 x 1 Inverted | 13547 | Blanco | 4× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Blanco | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Blanco | 10× |
| Wedge Sloped 45° 2 x 2 Corner | 13548 | Blanco | 4× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Blanco | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Blanco | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Blanco | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Blanco | 4× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Blanco | 6× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Blanco | 2× |
| Plate 3 x 3 | 11212 | Blanco | 4× |
| Plate Round 6 x 6 with Hole | 11213 | Blanco | 4× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Blanco | 6× |
| Wedge Plate 2 x 2 Left | 24299 | Blanco | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Blanco | 2× |
| Panel 1 x 3 x 1 | 23950 | Blanco | 8× |
| ANGLE PLATE 1X2 / 2X4 | 21731 | Blanco | 8× |
| Slope Curved 2 x 1 Inverted | 24201 | Blanco | 1× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Blanco | 6× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Blanco | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Blanco | 6× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Blanco | 6× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Blanco | 3× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Blanco | 3× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Blanco | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Blanco | 6× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Blanco | 4× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Blanco | 10× |
| LAMP HOLDER | 41632 | Blanco | 1× |
| Slope Double 45° 1 x 1 | 35464 | Blanco | 1× |
| Brick Round Corner 3 x 3 x 1 No Studs | 65617 | Blanco | 16× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Blanco | 4× |
| PLATE 1X2 W. 1 HORIZONTAL SNAP | 65458 | Blanco | 8× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Blanco | 2× |
| Wedge Plate 2 x 4 27° Right | 65426 | Blanco | 2× |
| Wedge Plate 2 x 4 27° Left | 65429 | Blanco | 2× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Blanco | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Blanco | 6× |
| PLATE W. BOWS 2X1½ | 81300 | Blanco | 2× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Blanco | 1× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Blanco | 1× |
| Slope Curved 4 x 3 with 3 Layers, 1 x 3 Cutout on Underside | 66955 | Blanco | 4× |
| Wedge Plate 8 x 3, 8° Left | 3544 | Blanco | 2× |
| Wedge Plate 8 x 3, 8° Right | 3545 | Blanco | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Blanco | 1× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Blanco | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Blanco | 6× |
| Brick Special 1 x 2 with Rotation Joint Pin | 4920 | Blanco | 3× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Blanco | 4× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Blanco | 4× |
| Wedge Curved 6 x 2 Right, Smooth Inner Walls | 5711 | Blanco | 2× |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots] | 53923 | Blanco | 1× |
| LEFT WING 6X12 | 3632 | Blanco | 1× |
| Technic Axle Pin 3L without Friction Ridges and 2L Axle | 65249 | Blanco | 2× |
| ANGLE ELEMENT, 0 DEGREES [1] | 42127 | Blanco | 2× |
| Technic Pin Connector Hub with 2 Perpendicular Axles | 10197 | Blanco | 2× |
ADN de construccion
Datos del inventario de piezas de Lloyd's Titan Mech 15th Anniversary
Con 1293 piezas, esta construccion esta +183% frente al set promedio de Ninjago y +107% frente al lanzamiento promedio de 2026.
Frente al set promedio de Ninjago
Set promedio de Ninjago: 457 piezas en 408 otros sets.
Frente al set promedio de 2026
Set promedio de 2026: 626 piezas en 427 otros sets.
Perfil de color
Color dominante
Negro
Piezas únicas
5.4 piezas por tipo único
Factor de repeticion
Promedio de piezas por tipo unico.
Pieza más usada
Plate 1 x 2
46xLos resultados se basan en inventarios oficiales LEGO. La precisión mejora a medida que confirmas la completitud de los sets.
Este sitio no está afiliado ni respaldado por el Grupo LEGO.



![Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/3200026.jpg)

![Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg)



