


LEGO NINJAGO 71860-1 Lloyd's Titan Mech 15th Anniversary celebra i 15 anni di LEGO NINJAGO con una nuova versione del Mech Titano di Lloyd. Lloyd e Grimfax danno alla scena un chiaro nucleo narrativo, mentre la minifigure da collezione del Maestro del Ghiaccio aggiunge un dettaglio anniversario. La grande action figure include ali, gambe, piedi, braccia e spalle snodabili per pose da battaglia o per un'esposizione dinamica. Le 3 minifigure completano il mech anniversario per gioco e collezione.
Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Plate 2 x 6 3795 | Nero | 2× |
![]() Brick Special 1 x 1 with Headlight 4070 | Nero | 8× |
![]() Plate Round 1 x 1 with Solid Stud 6141 | Nero | 4× |
![]() Technic Brick 1 x 2 [2 Pin Holes] 32000 | Nero | 5× |
![]() Slope Inverted 45° 4 x 2 Double 4871 | Nero | 4× |
![]() Plate Special 1 x 2 [Side Handle Closed Ends] 48336 | Nero | 4× |
![]() Plate Round 4 x 4 with Pin Hole 60474 | Nero | 2× |
![]() Slope 30? 1 x 2 x 2/3 85984 | Nero | 4× |
![]() Brick Round 2 x 2 Truncated Cone 98100 | Nero | 1× |
![]() Bracket 1 x 2 - 2 x 2 Inverted 99207 | Nero | 12× |
Visualizzati 10 di 301 pezzi
🔓 Registrati per vedere tutti i pezzi| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Nero | 4× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Nero | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Nero | 4× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Nero | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Nero | 12× |
| Slope Curved 4 x 1 Inverted | 13547 | Nero | 3× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Nero | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 2× |
| Plate 3 x 3 Cross | 15397 | Nero | 1× |
| Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 26599 | Nero | 2× |
| WALL DOUBLE CORNER 1X2X1 | 35391 | Nero | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Nero | 1× |
| Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth | 54657 | Nero | 1× |
| Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 53540 | Nero | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Nero | 8× |
| Tile Special 2 x 3 with 2 Clips without Tab between Clips | 65886 | Nero | 2× |
| Technic Rotation Joint Disk with Pin and Double Rotation Joint Ball Half | 79505 | Nero | 6× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Nero | 1× |
| Slope Inverted 45° 2 x 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes] | 76959 | Nero | 4× |
| Plate 3 x 3 Corner | 77844 | Nero | 2× |
| PLATE 2X2 W. BALL | 3768 | Nero | 2× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Nero | 1× |
| Bracket 5 x 1 x 1 1/3 | 5712 | Nero | 6× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Nero | 2× |
| Technic Axle 4 | 3705 | Nero | 5× |
| Technic Ball Joint with Through Axle Hole | 53585 | Nero | 8× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Nero | 6× |
| Rubber Technic Tread Attachment | 24375 | Nero | 10× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Nero | 12× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Nero | 6× |
| TECHNIC LEVER 2M | 44862 | Nero | 4× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Nero | 2× |
| Technic Steering Arm 3 x 1 with Towball Socket | 5997 | Nero | 2× |
| Plate 1 x 2 | 3023 | Beige | 15× |
| Brick 2 x 2 | 3003 | Beige | 4× |
| Plate 2 x 4 | 3020 | Beige | 4× |
| ROUND BRICK 1X1 | 3062 | Beige | 2× |
| Brick Special 1 x 1 with Headlight | 4070 | Beige | 6× |
| Plate 1 x 6 | 3666 | Beige | 2× |
| FLAT TILE 2X2 | 3068 | Beige | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Beige | 1× |
| FOOT, PLATE | 18971 | Beige | 1× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Beige | 1× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Beige | 2× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Beige | 2× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Nero | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Nero | 2× |
| ELEMENT SEPARATOR | 31510 | Arancione | 1× |
| Brick 1 x 1 | 3005 | Rosso | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Rosso | 2× |
| Plate 4 x 4 | 3031 | Rosso | 3× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Rosso | 6× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Rosso | 2× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Rosso | 5× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Rosso | 4× |
| Tile Round 1 x 2 Half Circle | 1748 | Rosso | 4× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Rosso | 4× |
| Technic Axle 2 Notched | 32062 | Rosso | 21× |
| Technic Axle 6 | 3706 | Rosso | 2× |
| BUSH FOR CROSS AXLE | 42798 | Rosso | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Rosso | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Rosso | 1× |
| TECHNIC LEVER 2M | 44862 | Rosso | 4× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Rosso | 1× |
| MINI HEAD, NO. 2255 | 33869 | Giallo | 1× |
| Brick 2 x 2 | 3003 | Verde sabbia | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Verde sabbia | 3× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Grigio bluastro scuro | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Grigio bluastro scuro | 2× |
| FLAT TILE 1X1 | 3070 | Grigio bluastro scuro | 8× |
| Plate 2 x 3 | 3021 | Grigio bluastro scuro | 4× |
| Plate 2 x 4 | 3020 | Grigio bluastro scuro | 4× |
| Slope Inverted 45° 2 x 1 | 3665 | Grigio bluastro scuro | 4× |
| Brick 2 x 3 | 3002 | Grigio bluastro scuro | 4× |
| Plate 1 x 3 | 3623 | Grigio bluastro scuro | 6× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Grigio bluastro scuro | 1× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Grigio bluastro scuro | 7× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Grigio bluastro scuro | 2× |
| BRICK 2X2 W/ BALL Ø 10.2 | 57909 | Grigio bluastro scuro | 4× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Grigio bluastro scuro | 12× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Grigio bluastro scuro | 6× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Grigio bluastro scuro | 4× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Grigio bluastro scuro | 18× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Grigio bluastro scuro | 6× |
| Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 11153 | Grigio bluastro scuro | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Grigio bluastro scuro | 8× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Grigio bluastro scuro | 2× |
| STICK 6M W/FLANGE | 28921 | Grigio bluastro scuro | 1× |
| Slope Inverted 45° 4 x 1 Double with 1 x 2 Recessed | 32802 | Grigio bluastro scuro | 2× |
| Tile 2 x 3 | 26603 | Grigio bluastro scuro | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Grigio bluastro scuro | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Grigio bluastro scuro | 12× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Grigio bluastro scuro | 7× |
| PLATE 1X2 W/STUB/ALONG/UPPER P | 53922 | Grigio bluastro scuro | 1× |
| BAD ROBOT ARM | 49753 | Grigio bluastro scuro | 4× |
| FLAT TILE 1X1, ROUND | 35381 | Grigio bluastro scuro | 4× |
| FLAT TILE 1X2, NO. 276 | 66894 | Grigio bluastro scuro | 2× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Grigio bluastro scuro | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Grigio bluastro scuro | 3× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Grigio bluastro scuro | 8× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Grigio bluastro scuro | 2× |
| 3.2 SHAFT W/ 5.9 BALL | 67692 | Grigio bluastro scuro | 1× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Grigio bluastro scuro | 6× |
| Brick Special 1 x 2 x 1 1/3 with Rotation Joint Socket | 80431 | Grigio bluastro scuro | 3× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Grigio bluastro scuro | 4× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Grigio bluastro scuro | 7× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Grigio bluastro scuro | 2× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Grigio bluastro scuro | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Grigio bluastro scuro | 2× |
| Technic Cam | 6575 | Grigio bluastro scuro | 4× |
| Technic Beam 1 x 2 with Ball Joint Angled | 50923 | Grigio bluastro scuro | 6× |
| Technic Axle 8 with Stop | 55013 | Grigio bluastro scuro | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Grigio bluastro scuro | 1× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Grigio bluastro scuro | 1× |
| DOUBLE CROSS BLOCK | 42142 | Grigio bluastro scuro | 2× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Grigio bluastro scuro | 6× |
| Rotation Joint Socket with 2 Pins | 80563 | Grigio bluastro scuro | 6× |
| Technic Pin 1/2 with Friction | 89678 | Grigio bluastro scuro | 2× |
| Plate 2 x 2 | 3022 | Nero | 1× |
| Brick 1 x 1 | 3005 | Grigio bluastro chiaro | 9× |
| Plate 2 x 3 | 3021 | Grigio bluastro chiaro | 16× |
| Plate 2 x 8 | 3034 | Grigio bluastro chiaro | 4× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Grigio bluastro chiaro | 4× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Grigio bluastro chiaro | 4× |
| Plate 1 x 4 | 3710 | Grigio bluastro chiaro | 6× |
| Brick Special 1 x 2 x 2/3 with Studs on Sides | 4595 | Grigio bluastro chiaro | 1× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Grigio bluastro chiaro | 1× |
| Plate 4 x 4 | 3031 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Grigio bluastro chiaro | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Grigio bluastro chiaro | 4× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Grigio bluastro chiaro | 1× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Grigio bluastro chiaro | 4× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Grigio bluastro chiaro | 1× |
| BRICK 1X1 W. HANDLE | 28917 | Grigio bluastro chiaro | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Grigio bluastro chiaro | 8× |
| FLAT TILE 1X1, ROUND | 35381 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Grigio bluastro chiaro | 2× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Grigio bluastro chiaro | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Grigio bluastro chiaro | 4× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Grigio bluastro chiaro | 16× |
| Plate 1 x 5 | 78329 | Grigio bluastro chiaro | 2× |
| Plate 2 x 3 with 1 x 1 Cutout | 73831 | Grigio bluastro chiaro | 4× |
| Brick Round 4 x 4 Dome Top with Round 2 x 2 Recessed, 4 Studs | 79850 | Grigio bluastro chiaro | 4× |
| Brick Curved 1 x 2 x 1 with Curved Top | 5841 | Grigio bluastro chiaro | 1× |
| WEAPON BARREL | 31511 | Grigio bluastro chiaro | 2× |
| 1/2 BUSH | 42136 | Grigio bluastro chiaro | 6× |
| CROSS BLOCK/FORM 2X2X2 | 42193 | Grigio bluastro chiaro | 5× |
| TECHNIC LEVER 2M | 44862 | Grigio bluastro chiaro | 1× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Grigio bluastro chiaro | 2× |
| Technic Axle 3 with Stop | 24316 | Marrone rossastro | 2× |
| Technic Axle 5 with Stop | 15462 | Marrone rossastro | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 7× |
| Plate 1 x 2 | 3023 | Nero | 29× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Nero | 8× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Nero | 4× |
| Slope 45? 2 x 2 | 3039 | Nero | 8× |
| ROOF TILE 1X2/45° | 3040 | Nero | 7× |
| Plate 1 x 6 | 3666 | Nero | 2× |
| Plate 1 x 4 | 3710 | Nero | 10× |
| Plate 2 x 3 | 3021 | Nero | 4× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Nero | 5× |
| Tile 1 x 3 | 63864 | Nero | 13× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Nero | 9× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Nero | 9× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Nero | 2× |
| Plate 2 x 4 | 3020 | Nero | 8× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Nero | 14× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Nero | 8× |
| Tile Round 1 x 1 Quarter | 25269 | Nero | 6× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Nero | 10× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Nero | 2× |
| TILE 4X4, W/ BOW, NO. 5 | 3477 | Nero | 8× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Nero | 4× |
| MOP HEAD NO. 1 | 7722 | Nero | 1× |
| Plate 2 x 2 Corner | 2420 | Beige scuro | 16× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Beige scuro | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Beige scuro | 8× |
| CROSSAXLE 3M WITH KNOB | 13670 | Beige scuro | 2× |
| AXE HEAD W HOLE Ø 3.2 | 79805 | Silver Metallic | 2× |
| Fric. element, cylinder | 65443 | Silver Metallic | 2× |
| Plate Round 1 x 1 with Hollow Stud and Bar on Underside - Long Space | 79194 | Trans-trasparente | 1× |
| ROCK CRYSTAL, TRANSPARENT | 28623 | Trans-verde neon | 1× |
| PYRAMID RIDGED TILE 1X1X2/3 | 35343 | Trans-verde neon | 2× |
| Radiator Grille 1x2 | 2412 | Medium Lime | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Giallo | 6× |
| Cone 1 x 1 [Top Groove] | 59900 | Giallo | 4× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Giallo | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Giallo | 4× |
| Brick Special 1 x 1 with Scroll with Open Stud | 20310 | Oro perlato | 2× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Lime | 2× |
| FROG | 28841 | Medium Lime | 1× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Medium Lime | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Medium Lime | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Giallo | 2× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Giallo | 12× |
| Plate 1 x 2 | 3023 | Giallo | 2× |
| Weapon Sword Hilt with Dragon Head | 36017 | Oro perlato | 2× |
| BAD ROBOT ARM | 49753 | Medium Lime | 6× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Medium Lime | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Oro perlato | 1× |
| Fin Jagged with Axle Hole | 76919 | Oro perlato | 3× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Medium Lime | 3× |
| Plate 2 x 2 | 3022 | Giallo | 6× |
| Brick Round Corner 3 x 3 x 1 No Studs | 65617 | Giallo | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Arancione chiaro brillante | 2× |
| PLATE W. BOWS 2X1½ | 81300 | Medium Lime | 4× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Giallo | 6× |
| MINI HAT, NO. 19 | 3616 | Medium Lime | 6× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Giallo | 8× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Oro perlato | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Giallo | 12× |
| Chain 2L with Bars | 6981 | Oro perlato | 1× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Giallo | 2× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Medium Lime | 1× |
| T-PIECE | 4697 | Medium Lime | 2× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Lime | 1× |
| Wedge Plate 3 x 6 Cut Corners | 2419 | Bianco | 2× |
| Tile 1 x 4 with Groove | 2431 | Bianco | 3× |
| FLAT TILE 1X2 | 3069 | Bianco | 4× |
| Plate 1 x 3 | 3623 | Bianco | 1× |
| Slope Inverted 45° 2 x 1 | 3665 | Bianco | 1× |
| Plate 1 x 6 | 3666 | Bianco | 8× |
| Plate 2 x 10 | 3832 | Bianco | 2× |
| PLATE 2X2 ROUND | 4032 | Bianco | 4× |
| ROOF TILE 1X3/25° INV. | 4287 | Bianco | 4× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Bianco | 2× |
| ROOF TILE 1X2/45° | 3040 | Bianco | 2× |
| Wedge Plate 6 x 12 Right | 30356 | Bianco | 1× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Bianco | 2× |
| Wedge Plate 4 x 4 Cut Corner | 30503 | Bianco | 4× |
| BRICK 2X6 | 44237 | Bianco | 2× |
| Slope Curved 3 x 1 No Studs | 50950 | Bianco | 3× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Bianco | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Bianco | 5× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Bianco | 4× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Bianco | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Bianco | 7× |
| Slope Curved 4 x 1 Inverted | 13547 | Bianco | 4× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Bianco | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Bianco | 10× |
| Wedge Sloped 45° 2 x 2 Corner | 13548 | Bianco | 4× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Bianco | 4× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Bianco | 2× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Bianco | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Bianco | 4× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Bianco | 6× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Bianco | 2× |
| Plate 3 x 3 | 11212 | Bianco | 4× |
| Plate Round 6 x 6 with Hole | 11213 | Bianco | 4× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Bianco | 6× |
| Wedge Plate 2 x 2 Left | 24299 | Bianco | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Bianco | 2× |
| Panel 1 x 3 x 1 | 23950 | Bianco | 8× |
| ANGLE PLATE 1X2 / 2X4 | 21731 | Bianco | 8× |
| Slope Curved 2 x 1 Inverted | 24201 | Bianco | 1× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Bianco | 6× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Bianco | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Bianco | 6× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Bianco | 6× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Bianco | 3× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Bianco | 3× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Bianco | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Bianco | 6× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Bianco | 4× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Bianco | 10× |
| LAMP HOLDER | 41632 | Bianco | 1× |
| Slope Double 45° 1 x 1 | 35464 | Bianco | 1× |
| Brick Round Corner 3 x 3 x 1 No Studs | 65617 | Bianco | 16× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Bianco | 4× |
| PLATE 1X2 W. 1 HORIZONTAL SNAP | 65458 | Bianco | 8× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Bianco | 2× |
| Wedge Plate 2 x 4 27° Right | 65426 | Bianco | 2× |
| Wedge Plate 2 x 4 27° Left | 65429 | Bianco | 2× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Bianco | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Bianco | 6× |
| PLATE W. BOWS 2X1½ | 81300 | Bianco | 2× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Bianco | 1× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Bianco | 1× |
| Slope Curved 4 x 3 with 3 Layers, 1 x 3 Cutout on Underside | 66955 | Bianco | 4× |
| Wedge Plate 8 x 3, 8° Left | 3544 | Bianco | 2× |
| Wedge Plate 8 x 3, 8° Right | 3545 | Bianco | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Bianco | 1× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Bianco | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Bianco | 6× |
| Brick Special 1 x 2 with Rotation Joint Pin | 4920 | Bianco | 3× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Bianco | 4× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Bianco | 4× |
| Wedge Curved 6 x 2 Right, Smooth Inner Walls | 5711 | Bianco | 2× |
| Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots] | 53923 | Bianco | 1× |
| LEFT WING 6X12 | 3632 | Bianco | 1× |
| Technic Axle Pin 3L without Friction Ridges and 2L Axle | 65249 | Bianco | 2× |
| ANGLE ELEMENT, 0 DEGREES [1] | 42127 | Bianco | 2× |
| Technic Pin Connector Hub with 2 Perpendicular Axles | 10197 | Bianco | 2× |
DNA della build
Dettagli inventario pezzi per Lloyd's Titan Mech 15th Anniversary
Con 1293 pezzi, questa build e +183% rispetto al set Ninjago medio e +107% rispetto alla media dei set del 2026.
Rispetto al set Ninjago medio
Set Ninjago medio: 457 pezzi su 408 altri set.
Rispetto al set medio del 2026
Set medio del 2026: 626 pezzi su 427 altri set.
Profilo colori
Colore dominante
Nero
Pezzi unici
5.4 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Plate 1 x 2
46xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.



![Technic Brick 1 x 2 [2 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/3200026.jpg)

![Plate Special 1 x 2 [Side Handle Closed Ends]](https://cdn.rebrickable.com/media/parts/elements/4225201.jpg)



