


LEGO NINJAGO 71872-1 Ultra Dragon Battle ricrea la battaglia finale della storia NINJAGO Legends Duskfall. Il modello mette un drago a 4 teste contro il serpente Devourer che emerge dal terreno. Il drago puo essere rimosso dalla base, mentre teste, colli, mascelle, coda e ali snodabili aggiungono azione. Jin, Mira, Nate e un Generale Oni completano la scena.
Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Plate 2 x 2 Corner 2420 | Nero | 2× |
![]() Tile 1 x 4 with Groove 2431 | Nero | 4× |
![]() Brick 2 x 4 3001 | Nero | 2× |
![]() Brick 2 x 3 3002 | Nero | 1× |
![]() Brick 2 x 2 3003 | Nero | 1× |
![]() Brick 1 x 2 3004 | Nero | 1× |
![]() Brick 1 x 1 3005 | Nero | 2× |
![]() Brick 1 x 4 3010 | Nero | 2× |
![]() Plate 2 x 4 3020 | Nero | 6× |
![]() Plate 2 x 8 3034 | Nero | 1× |
Visualizzati 10 di 558 pezzi
🔓 Registrati per vedere tutti i pezzi| Brick 1 x 2 | 3004 | Nero | 1× |
| Brick 1 x 1 | 3005 | Nero | 2× |
| Brick 1 x 4 | 3010 | Nero | 2× |
| Plate 2 x 4 | 3020 | Nero | 6× |
| Plate 2 x 8 | 3034 | Nero | 1× |
| Plate 4 x 8 | 3035 | Nero | 1× |
| FLAT TILE 2X2 | 3068 | Nero | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Nero | 1× |
| Brick 1 x 3 | 3622 | Nero | 4× |
| Plate 1 x 3 | 3623 | Nero | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Nero | 2× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Nero | 2× |
| Plate 1 x 4 | 3710 | Nero | 2× |
| PLATE 2X2 ROUND | 4032 | Nero | 1× |
| Plate 1 x 10 | 4477 | Nero | 4× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Nero | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Nero | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Nero | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Nero | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Nero | 2× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Nero | 4× |
| Plate Round Corner 3 x 3 | 30357 | Nero | 2× |
| Slope Curved 3 x 1 No Studs | 50950 | Nero | 4× |
| Wedge Plate 8 x 3, 22° Right | 50304 | Nero | 1× |
| Wedge Plate 8 x 3, 22° Left | 50305 | Nero | 1× |
| Plate Special 1 x 1 with Tooth | 49668 | Nero | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 4× |
| Slope 18° 4 x 1 | 60477 | Nero | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Nero | 1× |
| Tile 2 x 4 with Groove | 87079 | Nero | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Nero | 2× |
| Plate Special 1 x 2 with Angled Handles on Side | 92692 | Nero | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Nero | 1× |
| Slope Curved 4 x 2 No Studs | 93606 | Nero | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Nero | 33× |
| Wedge Curved 4 x 3 No Studs [Plain] | 64225 | Nero | 1× |
| Tile Special 2 x 2 Inverted | 11203 | Nero | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Nero | 10× |
| BRICK 2X8 | 93888 | Nero | 1× |
| Slope Curved 4 x 1 Inverted | 13547 | Nero | 16× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Nero | 4× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Nero | 12× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Nero | 3× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Nero | 6× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 2× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Nero | 2× |
| ANGLE PLATE 1X2 / 2X4 | 21731 | Nero | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Nero | 1× |
| Slope Curved 2 x 1 Inverted | 24201 | Nero | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Nero | 7× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Nero | 4× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Nero | 2× |
| ANG.BRICK 5X5, Ø4,85 | 28973 | Nero | 4× |
| Tile Round 1 x 1 Quarter | 25269 | Nero | 4× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Nero | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Nero | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Nero | 4× |
| Weapon Harpoon [Smooth Shaft] | 18041 | Nero | 4× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Nero | 10× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Nero | 3× |
| Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Top | 43045 | Nero | 1× |
| PLATE 1X2 W. STUB/VERTICAL | 49716 | Nero | 4× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Nero | 10× |
| PLATE 4X4 W/ANGLE | 41822 | Nero | 2× |
| BAD ROBOT ARM | 49753 | Nero | 6× |
| LAMP HOLDER | 41632 | Nero | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Nero | 4× |
| Slope Curved 4 x 3 with 3 Layers, 1 x 3 Cutout on Underside | 66955 | Nero | 1× |
| BRICK 2X2 Ø4.85 VERTIC. SNAP | 48454 | Nero | 3× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Nero | 1× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Nero | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Nero | 4× |
| Weapon Hilt Symmetric | 66909 | Nero | 1× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Nero | 4× |
| Wedge Plate 6 x 2 Left | 78443 | Nero | 1× |
| Wedge Plate 6 x 2 Right | 78444 | Nero | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Nero | 6× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Nero | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Nero | 22× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Nero | 3× |
| Plate Special 1 x 2 with 2 End Towballs | 3170 | Nero | 1× |
| Animal Body Part, Horn Stacked 45 deg. with Axle Connectors | 2142 | Nero | 1× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Nero | 3× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Nero | 4× |
| ROOF TILE 3X4/25 DEG. | 3016 | Nero | 8× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Nero | 2× |
| Plate 3 x 3 Corner | 77844 | Nero | 2× |
| Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout | 58846 | Nero | 4× |
| BRICK 4X6, W/ 4.85 HOLE, CUT OUT | 1679 | Nero | 1× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Nero | 2× |
| Wedge Curved 6 x 2 Right, Smooth Inner Walls | 5711 | Nero | 1× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Nero | 5× |
| Hat Conical Asian with Raised Center | 26007 | Nero | 1× |
| Bracket 5 x 2 x 1 1/3 with Bottom Stud Holder | 79180 | Nero | 1× |
| Slope Curved 3 x 1 x 2/3 | 7302 | Nero | 2× |
| Slope 30° 1 x 1 x 2/3 Double Corner | 7826 | Nero | 6× |
| Brick Round Curved 1 x 1 x 1 Quarter Dome | 5848 | Nero | 2× |
| BRICK 4X6 W/ BOW, W/ ANGLE | 8132 | Pearl Very Light Gray | 1× |
| Technic Axle 4 | 3705 | Nero | 10× |
| Technic Axle 10 | 3737 | Nero | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Nero | 4× |
| Technic Axle 2 Notched | 32062 | Nero | 3× |
| Technic Ball Joint with Through Axle Hole | 53585 | Nero | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Nero | 6× |
| Technic Panel Fairing #14 Large Short Smooth, Side B | 64680 | Nero | 1× |
| Technic Panel Fairing #13 Large Short Smooth, Side A | 64394 | Nero | 1× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Nero | 2× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Nero | 2× |
| ANGLE ELEMENT, 157,5 DEGR. [3] | 42128 | Nero | 8× |
| ANGLE ELEMENT, 112,5 DEGR. [5] | 41488 | Nero | 2× |
| CROSS BLOCK 3M | 42796 | Nero | 2× |
| CROSS BLOCK/FORM 2X2X2 | 42193 | Nero | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Nero | 29× |
| Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 48267 | Nero | 4× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Nero | 4× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Nero | 12× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Nero | 4× |
| Technic Panel Triangle 5 x 4 Right | 80274 | Nero | 1× |
| Technic Panel Triangle 5 x 4 Left | 80278 | Nero | 1× |
| 3 BRANCH CROSSHOLE W. HOLE | 49155 | Nero | 4× |
| Technic Axle and Pin Connector Angled #7 - 168.75° | 4450 | Nero | 2× |
| Brick 1 x 4 | 3010 | Beige | 2× |
| Plate 4 x 6 | 3032 | Beige | 1× |
| Plate 2 x 2 | 3022 | Beige | 2× |
| ROUND BRICK 1X1 | 3062 | Beige | 2× |
| Plate 2 x 3 | 3021 | Beige | 3× |
| BRICK Ø16 W. CROSS | 6143 | Beige | 1× |
| PLATE 2X2 ROUND | 4032 | Beige | 5× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Beige | 4× |
| Plate 4 x 4 | 3031 | Beige | 4× |
| Brick Arch 1 x 4 | 3659 | Beige | 3× |
| Plate 16 x 16 | 91405 | Beige | 1× |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 15208 | Beige | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Beige | 3× |
| Horn with Shaft | 88513 | Beige | 4× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Beige | 2× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Beige | 2× |
| Tile 2 x 6 | 69729 | Beige | 2× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Beige | 8× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Beige | 2× |
| Turntable 2 x 2 Plate, Base | 3680 | Beige | 1× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Beige | 1× |
| Technic Ball Joint with Through Axle Hole | 53585 | Beige | 2× |
| Brick 1 x 8 | 3008 | Blu scuro | 3× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Nero | 6× |
| ELEMENT SEPARATOR | 31510 | Arancione | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Arancione | 8× |
| Brick 1 x 4 | 3010 | Rosso | 1× |
| FLAT TILE 2X2 | 3068 | Rosso | 1× |
| Plate 2 x 16 | 4282 | Rosso | 8× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rosso | 14× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Rosso | 2× |
| ANGLE PLATE 1X2 / 2X4 | 21731 | Rosso | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Rosso | 5× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Rosso | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Rosso | 4× |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | 13564 | Rosso | 1× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Rosso | 4× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Rosso | 1× |
| Plate 3 x 3 Corner | 77844 | Rosso | 4× |
| Plate Special 1 x 1 with Hole Through Stud, 3 Bars and 3 Bar Holes | 1941 | Rosso | 2× |
| Technic Axle 2 Notched | 32062 | Rosso | 19× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Rosso | 2× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Rosso | 2× |
| Technic Axle 4 | 3705 | Rosso | 2× |
| Technic Axle 6 | 3706 | Rosso | 1× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Rosso | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rosso | 4× |
| Technic Pin 1/2 with Friction | 89678 | Rosso | 8× |
| Plate 1 x 8 | 3460 | Giallo | 1× |
| Plate 2 x 6 | 3795 | Giallo | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Giallo | 4× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Giallo | 4× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Giallo | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Giallo | 2× |
| Brick 2 x 4 | 3001 | Lime | 3× |
| Brick 1 x 3 | 3622 | Lime | 10× |
| Plate 1 x 4 | 3710 | Lime | 4× |
| Plate 1 x 3 | 3623 | Lime | 3× |
| Plate 4 x 4 | 3031 | Lime | 3× |
| ROOF TILE 1X2/45° | 3040 | Lime | 4× |
| Plate 2 x 4 | 3020 | Lime | 3× |
| Plate 2 x 6 | 3795 | Lime | 2× |
| Slope 45? 2 x 2 | 3039 | Lime | 2× |
| Plate 2 x 3 | 3021 | Lime | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Lime | 10× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Lime | 4× |
| PLATE 2X2 ROUND | 4032 | Lime | 13× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Lime | 2× |
| ANGLE ELEMENT, 0 DEGREES [1] | 42127 | Lime | 2× |
| Equipment Candlestick | 37762 | Beige | 2× |
| Brick Curved 2 x 3 | 6215 | Grigio bluastro chiaro | 2× |
| Plate 2 x 2 Corner | 2420 | Argento metallico | 5× |
| Wedge Plate 3 x 2 Left | 43723 | Grigio bluastro chiaro | 3× |
| Wedge Plate 3 x 2 Right | 43722 | Grigio bluastro chiaro | 3× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Grigio bluastro chiaro | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Grigio bluastro chiaro | 3× |
| Wedge Plate 2 x 2 Left | 24299 | Grigio bluastro chiaro | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Grigio bluastro chiaro | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Grigio bluastro chiaro | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Grigio bluastro chiaro | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Grigio bluastro chiaro | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Grigio bluastro chiaro | 2× |
| Plate 2 x 10 | 3832 | Grigio bluastro scuro | 4× |
| Wedge Plate 3 x 2 Right | 43722 | Grigio bluastro scuro | 3× |
| Wedge Plate 3 x 2 Left | 43723 | Grigio bluastro scuro | 3× |
| Plate 2 x 8 | 3034 | Grigio bluastro scuro | 1× |
| Tile 1 x 4 with Groove | 2431 | Grigio bluastro scuro | 2× |
| Slope 45? 2 x 2 | 3039 | Grigio bluastro scuro | 1× |
| Plate 1 x 6 | 3666 | Grigio bluastro scuro | 3× |
| ROUND BRICK 1X1 | 3062 | Grigio bluastro scuro | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Grigio bluastro scuro | 4× |
| Wedge Plate 6 x 3 Left | 54384 | Grigio bluastro scuro | 1× |
| Wedge Plate 6 x 3 Right | 54383 | Grigio bluastro scuro | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Grigio bluastro scuro | 7× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 2 with End Towball | 22890 | Grigio bluastro scuro | 12× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Grigio bluastro scuro | 4× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Grigio bluastro scuro | 1× |
| Tile 2 x 3 | 26603 | Grigio bluastro scuro | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Grigio bluastro scuro | 3× |
| Plate Special / Shield Rectangular with 4 Studs, Handle | 30166 | Grigio bluastro scuro | 1× |
| PLATE 1X2 W. STUB/VERTICAL | 49716 | Grigio bluastro scuro | 4× |
| BRICK 2X2 Ø4.85 FEMALE | 48370 | Grigio bluastro scuro | 2× |
| PLATE 1X1 W. HOLDER | 44860 | Grigio bluastro scuro | 1× |
| Weapon Hilt Symmetric | 66909 | Grigio bluastro scuro | 1× |
| PLATE 2X4/2X2X1 W. VERTICAL SN | 42194 | Grigio bluastro scuro | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Grigio bluastro scuro | 5× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Grigio bluastro scuro | 2× |
| Brick Special 1 x 2 x 1 1/3 with Rotation Joint Socket | 80431 | Grigio bluastro scuro | 4× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Grigio bluastro scuro | 2× |
| Plate 2x2 w. stump/top | 53968 | Grigio bluastro scuro | 1× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Grigio bluastro scuro | 2× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Grigio bluastro scuro | 2× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 2 Sides | 80796 | Grigio bluastro scuro | 2× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Grigio bluastro scuro | 1× |
| Technic Beam 1 x 2 with Ball Joint Angled | 50923 | Grigio bluastro scuro | 2× |
| Rotation Joint Socket with 2 Pins | 80563 | Grigio bluastro scuro | 2× |
| Technic Pin 1/2 with Friction | 89678 | Grigio bluastro scuro | 8× |
| Brick 1 x 4 | 3010 | Nero | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 12× |
| Brick 1 x 1 | 3005 | Nero | 2× |
| Plate 2 x 4 | 3020 | Nero | 9× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Nero | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Nero | 10× |
| Slope 33° 3 x 1 | 4286 | Nero | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Nero | 10× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Nero | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Nero | 2× |
| Plate 2 x 6 | 3795 | Nero | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Nero | 1× |
| Tile Round 1 x 1 Quarter | 25269 | Nero | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Nero | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Nero | 3× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Nero | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Nero | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Nero | 6× |
| Windscreen 6 x 4 x 1 Hexagonal with Handle | 27262 | Nero | 2× |
| PLATE 1x2 W. HORIZONTAL HOLE Ø4,85 REV. | 28809 | Nero | 1× |
| Tile Special 1 x 2 with Two Vertical Teeth / Tooth | 15209 | Nero | 6× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Nero | 10× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Nero | 6× |
| Tile Round 2 x 2 Half Circle | 5520 | Nero | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Nero | 7× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Nero | 10× |
| Plate 4 x 4 | 3031 | Nero | 1× |
| BRICK Ø16 W. CROSS | 6143 | Medium Azur | 1× |
| Plate 2 x 3 | 3021 | Nero | 2× |
| Plate 1 x 2 | 3023 | Nero | 4× |
| Plate 1 x 3 | 3623 | Nero | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Nero | 6× |
| Brick 1 x 1 | 3005 | Nero | 2× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Nero | 14× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Nero | 3× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Nero | 4× |
| RIGHT PANEL 2X5 (N0 21) | 43499 | Nero | 1× |
| LEFT PANEL 2X5 (NR 22) | 43500 | Nero | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Argento metallico | 3× |
| Tile Round 1 x 2 | 1126 | Grigio bluastro chiaro | 7× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Grigio bluastro chiaro | 5× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Grigio bluastro chiaro | 5× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Grigio bluastro chiaro | 2× |
| Plate 1 x 2 | 3023 | Grigio bluastro chiaro | 6× |
| Plate 1 x 1 | 3024 | Grigio bluastro chiaro | 4× |
| FLAT TILE 1X1 | 3070 | Grigio bluastro chiaro | 6× |
| Plate 1 x 3 | 3623 | Grigio bluastro chiaro | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Grigio bluastro chiaro | 5× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Grigio bluastro chiaro | 2× |
| PLATE 2X2 ROUND | 4032 | Grigio bluastro chiaro | 4× |
| Brick Special 1 x 2 x 2/3 with Studs on Sides | 4595 | Grigio bluastro chiaro | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Grigio bluastro chiaro | 2× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Grigio bluastro chiaro | 1× |
| BRICK 2X6 | 44237 | Grigio bluastro chiaro | 6× |
| Slope 45° 2 x 2 Double Convex | 3045 | Grigio bluastro chiaro | 5× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Grigio bluastro chiaro | 2× |
| Turntable 2 x 2 Plate - Top | 3679 | Grigio bluastro chiaro | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Grigio bluastro chiaro | 3× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Grigio bluastro chiaro | 2× |
| Slope 18° 4 x 1 | 60477 | Grigio bluastro chiaro | 3× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Grigio bluastro chiaro | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Grigio bluastro chiaro | 10× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Grigio bluastro chiaro | 6× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Grigio bluastro chiaro | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Grigio bluastro chiaro | 2× |
| PLATE 2X2 W 1 KNOB | 23893 | Grigio bluastro chiaro | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Grigio bluastro chiaro | 4× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Grigio bluastro chiaro | 11× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Grigio bluastro chiaro | 1× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Grigio bluastro chiaro | 3× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Grigio bluastro chiaro | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Grigio bluastro chiaro | 8× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Grigio bluastro chiaro | 2× |
| FLAT TILE 1X1, ROUND | 35381 | Grigio bluastro chiaro | 2× |
| Wedge Sloped 18° 4 x 4 Corner | 43708 | Grigio bluastro chiaro | 3× |
| Wedge Sloped 45° 3 x 3 Left | 42862 | Grigio bluastro chiaro | 3× |
| Wedge Sloped 45° 3 x 3 Right | 48165 | Grigio bluastro chiaro | 3× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Grigio bluastro chiaro | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Grigio bluastro chiaro | 10× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Grigio bluastro chiaro | 8× |
| 3 w.arch w.knob and shaft ø3.2 | 42456 | Grigio bluastro chiaro | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Grigio bluastro chiaro | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Grigio bluastro chiaro | 3× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Grigio bluastro chiaro | 17× |
| Wedge Sloped 2 x 5 Right | 3505 | Grigio bluastro chiaro | 1× |
| Wedge Sloped 2 x 5 Left | 3504 | Grigio bluastro chiaro | 1× |
| Slope Curved 1 x 4 with Stud Notch Right | 5414 | Grigio bluastro chiaro | 2× |
| Slope Curved 1 x 4 with Stud Notch Left | 5415 | Grigio bluastro chiaro | 2× |
| Technic Pin Long 3l, No Friction Ridges, with Stop and Hole | 77765 | Grigio bluastro chiaro | 2× |
| Technic Pin Connector Hub with 3L Axle | 5713 | Grigio bluastro chiaro | 2× |
| Rotation Joint Disc with 2 Pins | 6991 | Grigio bluastro chiaro | 2× |
| MINI ARMOUR, NO. 28 | 4923 | Nero | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 2× |
| Tile 1 x 8 with Groove | 4162 | Nero | 1× |
| Plate 1 x 2 | 3023 | Nero | 8× |
| Plate 1 x 8 | 3460 | Nero | 1× |
| Plate 2 x 2 | 3022 | Nero | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 1× |
| Plate 2 x 3 | 3021 | Nero | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Nero | 2× |
| Plate 1 x 2 | 3023 | Nero | 6× |
| Plate 2 x 4 | 3020 | Nero | 3× |
| FLAT TILE 1X2 | 3069 | Olive Green | 5× |
| FLAT TILE 1X1, ROUND | 35381 | Olive Green | 3× |
| Plant, Plate 1 x 1 Round with 3 Leaves | 32607 | Nero | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Nero | 5× |
| Plate 1 x 3 | 3623 | Nero | 10× |
| PLATE 2X2 ROUND | 4032 | Marrone rossastro | 3× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Nero | 1× |
| BRICK 2X10 | 92538 | Marrone rossastro | 1× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Nero | 2× |
| PLATE 1X2 W. 1 HORIZONTAL SNAP | 65458 | Marrone rossastro | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Nero | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Nero | 1× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Nero | 2× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Nero | 2× |
| Technic Beam 1 x 3 Thick | 32523 | Nero | 3× |
| Technic Axle 3 with Stop | 24316 | Marrone rossastro | 1× |
| Plate 2 x 8 | 3034 | Beige scuro | 3× |
| Plate 2 x 4 | 3020 | Beige scuro | 2× |
| Plate 6 x 6 | 3958 | Beige scuro | 2× |
| Plate 1 x 4 | 3710 | Beige scuro | 8× |
| Wedge Plate 3 x 2 Left | 43723 | Beige scuro | 5× |
| Wedge Plate 3 x 2 Right | 43722 | Beige scuro | 5× |
| Plate 4 x 8 | 3035 | Beige scuro | 1× |
| Plate 1 x 6 | 3666 | Beige scuro | 3× |
| Wedge Plate 6 x 6 Cut Corner | 6106 | Beige scuro | 2× |
| Plate 2 x 3 | 3021 | Beige scuro | 6× |
| Plate 6 x 10 | 3033 | Beige scuro | 1× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Beige scuro | 2× |
| Plate 4 x 4 Corner | 2639 | Beige scuro | 2× |
| Tile 2 x 4 with Groove | 87079 | Beige scuro | 18× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Beige scuro | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Beige scuro | 26× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Beige scuro | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Beige scuro | 2× |
| Horn with Shaft | 88513 | Beige scuro | 3× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Beige scuro | 14× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Beige scuro | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Beige scuro | 16× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Beige scuro | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Beige scuro | 4× |
| Wedge Plate 2 x 2 Left | 24299 | Beige scuro | 5× |
| Wedge Plate 2 x 2 Right | 24307 | Beige scuro | 5× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Beige scuro | 2× |
| Plate Special 2 x 3 with Rocks | 27261 | Beige scuro | 6× |
| Plate 1x1 w/ 1.5 Hole | 35344 | Beige scuro | 4× |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 15208 | Beige scuro | 10× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Beige scuro | 6× |
| PLATE 2X2 ROUND | 4032 | Beige scuro | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Beige scuro | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Beige scuro | 2× |
| Animal / Creature Body Part, Claw with Clip | 3171 | Beige scuro | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Beige scuro | 4× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Beige scuro | 6× |
| Plate Special 1 x 1 with Tooth | 49668 | Beige scuro | 2× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Large | 11089 | Beige scuro | 4× |
| CROSSAXLE 3M WITH KNOB | 13670 | Beige scuro | 2× |
| ANGLE ELEMENT 135 DEG. [4] | 42156 | Beige scuro | 2× |
| Horn with Shaft | 88513 | Silver Metallic | 8× |
| Equipment Lantern | 37776 | Pearl Titanium | 1× |
| Weapon Sword (Uruk-hai) | 10050 | Pearl Titanium | 1× |
| PLATE 1X2 W/ SHAFT 12M | 49546 | Trans-trasparente | 2× |
| Bar Curved with Axle End and 1 x 1 Round Plate | 4042 | Trans-trasparente | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 29387 | Trans-trasparente | 2× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Trans-trasparente | 6× |
| ROUND BRICK 1X1 | 35390 | Trans-trasparente | 4× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Trans-trasparente | 1× |
| ROOF TILE 1X1X2/3 | 35338 | Nero | 4× |
| PLATE 1X2 | 28653 | Nero | 15× |
| PLATE 1X1 ROUND | 34823 | Nero | 9× |
| Parabolic Element D16 | 35395 | Nero | 1× |
| ROOF TILE 1X1X2/3 | 35338 | Transparent Bright Orange | 2× |
| BLADE, NO. 6 | 28683 | Transparent Bright Orange | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 29387 | Transparent Bright Orange | 2× |
| PLATE 1X2 | 28653 | Transparent Bright Orange | 2× |
| Wave / Lightning Angular, Single | 27256 | Trans-azzurro | 2× |
| Curled Decorative Ornament with Bar | 28870 | Trans-verde neon | 2× |
| ROOF TILE 1X1X2/3 | 35338 | Trans-verde neon | 5× |
| PLATE 1X2 | 28653 | Trans-verde neon | 2× |
| Nose Cone Small 1x1 | 28701 | Trans-verde neon | 2× |
| PLATE 1X1 W/TOOTH | 35162 | Trans-verde neon | 3× |
| PLATE 1X2 | 28653 | Nero | 4× |
| PLATE 1X1 ROUND | 34823 | Nero | 2× |
| PYRAMID RIDGED TILE 1X1X2/3 | 35343 | Nero | 2× |
| ROOF TILE 1X1X2/3 | 35338 | Trans-azzurro | 2× |
| AXE HEAD W HOLE Ø 3.2 | 79805 | Trans-azzurro | 2× |
| PLATE 1X2 | 28653 | Trans-azzurro | 2× |
| KITCHEN EQUIPMENT, NO. 9 | 3576 | Trans-azzurro | 2× |
| Wave / Lightning Angular, Single | 27256 | Trans-rosa scuro | 2× |
| ROOF TILE 1X1X2/3 | 35338 | Nero | 2× |
| PLATE 1X2 | 28653 | Nero | 2× |
| Plant, Flower, Peony Rose with 2 Layers | 5904 | Nero | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Giallo | 3× |
| Cone 1 x 1 [Top Groove] | 59900 | Giallo | 4× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Giallo | 2× |
| Plate 1 x 1 | 3024 | Giallo | 4× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Giallo | 9× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Lime | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Giallo | 4× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Giallo | 2× |
| Plate 1 x 2 | 3023 | Giallo | 8× |
| Plate 1x1 with Up Right Holder | 44842 | Medium Lime | 2× |
| Horn with Shaft | 88513 | Medium Lime | 4× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Giallo | 4× |
| Minifig Neckwear Shoulder Pads with Spikes | 12618 | Oro perlato | 1× |
| Fin Jagged with Axle Hole | 76919 | Oro perlato | 2× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Medium Lime | 8× |
| Plate 2 x 2 | 3022 | Giallo | 5× |
| Wedge Sloped 45° 2 x 4 Triple | 47759 | Oro perlato | 6× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Oro perlato | 8× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Arancione chiaro brillante | 5× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Oro perlato | 3× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Beige scuro | 3× |
| Minifig Neckwear Armor Shoulder Pad Single with Scabbard for 2 Katanas, Wedge | 5501 | Oro perlato | 1× |
| Weapon Sword / Katana / Wakizashi Short | 5644 | Oro perlato | 5× |
| Creature Body Part, Dragon Head Upper Jaw, Hollow Eyes, Spikes | 3770 | Bianco | 4× |
| Wedge Plate 2 x 2 Left | 24299 | Giallo | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Giallo | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Giallo | 12× |
| Wedge Sloped 4 x 4 Triple with 3 Ridges on Slope | 86148 | Oro perlato | 6× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Giallo | 9× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Giallo | 9× |
| Wedge Plate 2 x 4 27° Right | 65426 | Giallo | 1× |
| Wedge Plate 2 x 4 27° Left | 65429 | Giallo | 1× |
| Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 48267 | Giallo | 2× |
| Large Figure Limb Cover / Claw / Spike Large with Axle | 15362 | Oro perlato | 4× |
| Plate 2 x 2 Corner | 2420 | Bianco | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Bianco | 2× |
| Brick 2 x 2 | 3003 | Bianco | 2× |
| Brick 1 x 6 | 3009 | Bianco | 2× |
| Plate 2 x 4 | 3020 | Bianco | 5× |
| Plate 2 x 3 | 3021 | Bianco | 11× |
| Plate 2 x 2 | 3022 | Bianco | 3× |
| Plate 4 x 6 | 3032 | Bianco | 1× |
| Slope 45? 2 x 2 | 3039 | Bianco | 4× |
| ROUND BRICK 1X1 | 3062 | Bianco | 3× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Bianco | 2× |
| Plate 1 x 4 | 3710 | Bianco | 18× |
| ROOF TILE 1X3/25° INV. | 4287 | Bianco | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Bianco | 4× |
| ROOF TILE 1X2/45° | 3040 | Bianco | 6× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Bianco | 3× |
| Wedge Plate 3 x 2 Right | 43722 | Bianco | 5× |
| Wedge Plate 3 x 2 Left | 43723 | Bianco | 5× |
| BRICK 2X6 | 44237 | Bianco | 3× |
| Slope 45° 2 x 2 Double Convex | 3045 | Bianco | 2× |
| Plate 4 x 4 | 3031 | Bianco | 5× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Bianco | 4× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Bianco | 2× |
| Wedge Curved 4 x 4 No Top Studs | 47753 | Bianco | 3× |
| Tile Special 2 x 2 Inverted | 11203 | Bianco | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Bianco | 8× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Bianco | 6× |
| Slope Curved 4 x 2 No Studs | 93606 | Bianco | 2× |
| Slope Curved 4 x 1 Inverted | 13547 | Bianco | 4× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Bianco | 3× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Bianco | 2× |
DNA della build
Dettagli inventario pezzi per Ultra Dragon Battle
Con 2177 pezzi, questa build e +378% rispetto al set Ninjago medio e +249% rispetto alla media dei set del 2026.
Rispetto al set Ninjago medio
Set Ninjago medio: 455 pezzi su 408 altri set.
Rispetto al set medio del 2026
Set medio del 2026: 624 pezzi su 427 altri set.
Profilo colori
Colore dominante
Nero
Pezzi unici
6.5 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Bracket 1 x 2 - 2 x 2 Inverted
49xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.









