


Preparati allo scontro finale a Ninjago con i colossali LEGO Ninjago 71870-1 The Twin Titan Mechs! Comanda due monumentali guerrieri robotici, ciascuno progettato con incredibile dettaglio per combattimenti senza precedenti. Immagina eroici piloti ninja assumere il controllo di questi imponenti titani, scatenando attacchi devastanti con il loro arsenale unico di shooter e lame energetiche. Ingaggia battaglie epiche grazie agli arti articolati che consentono pose dinamiche, ricreando scontri iconici di Ninjago o forgiando saghe completamente nuove. Espongono questi magnifici mech in una posa d'azione, pronti a difendere i regni o sfidare qualsiasi nemico formidabile. Questo set offre un'esperienza di costruzione e gioco ineguagliabile per ogni appassionato Ninja.
Inventario pezzi
| Pezzo | Colore | Qtà |
|---|---|---|
![]() Radiator Grille 1x2 2412 | Nero | 9× |
![]() Brick 2 x 4 3001 | Nero | 2× |
![]() Brick 2 x 3 3002 | Nero | 2× |
![]() Brick 2 x 2 3003 | Nero | 3× |
![]() Plate 2 x 3 3021 | Nero | 4× |
![]() Plate 2 x 2 3022 | Nero | 10× |
![]() Plate 1 x 1 3024 | Nero | 6× |
![]() Plate 2 x 8 3034 | Nero | 6× |
![]() Slope 33° 3 x 2 3298 | Nero | 6× |
![]() Slope Inverted 45° 2 x 1 3665 | Nero | 2× |
Visualizzati 10 di 413 pezzi
🔓 Registrati per vedere tutti i pezzi| Plate 2 x 2 | 3022 | Nero | 10× |
| Plate 1 x 1 | 3024 | Nero | 6× |
| Plate 2 x 8 | 3034 | Nero | 6× |
| Slope 33° 3 x 2 | 3298 | Nero | 6× |
| Slope Inverted 45° 2 x 1 | 3665 | Nero | 2× |
| Plate 1 x 6 | 3666 | Nero | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Nero | 6× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Nero | 4× |
| Plate 2 x 6 | 3795 | Nero | 8× |
| PLATE 2X2 ROUND | 4032 | Nero | 6× |
| Plate 2 x 16 | 4282 | Nero | 2× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Nero | 1× |
| BRICK Ø16 W. CROSS | 6143 | Nero | 2× |
| Tile 1 x 6 with Groove | 6636 | Nero | 13× |
| Panel 1 x 1 x 1 Corner | 6231 | Nero | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Nero | 1× |
| Plate 4 x 4 | 3031 | Nero | 3× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Nero | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Nero | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Nero | 6× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Nero | 4× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Nero | 6× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Nero | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Nero | 12× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Nero | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Nero | 2× |
| BRICK 2X8 | 93888 | Nero | 1× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Nero | 2× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Nero | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Nero | 4× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Nero | 5× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Nero | 2× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Nero | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Nero | 3× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Nero | 8× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Nero | 5× |
| PLATE 1x2 W. HORIZONTAL HOLE Ø4,85 REV. | 28809 | Nero | 12× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Nero | 6× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Nero | 21× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Nero | 14× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Nero | 2× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Nero | 4× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Nero | 3× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Nero | 8× |
| Weapon Spike Flexible 3.5L | 64727 | Nero | 2× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Nero | 4× |
| PLATE 1X2 W. 1 HORIZONTAL SNAP | 65458 | Nero | 2× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Nero | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Nero | 2× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Nero | 3× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Nero | 8× |
| Technic Rotation Joint Disk with Pin and Double Rotation Joint Ball Half | 79505 | Nero | 8× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Nero | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Nero | 2× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Nero | 1× |
| Plate Special 1 x 1 with Handle on 2 Ends | 78257 | Nero | 2× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Nero | 5× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Nero | 4× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Nero | 2× |
| Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) | 65509 | Nero | 7× |
| PLATE 2X2 W. BALL | 3768 | Nero | 2× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Nero | 2× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Nero | 2× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Nero | 6× |
| BRICK 2X2 W/ BALL Ø 10.2 | 57909 | Nero | 4× |
| Bracket 5 x 2 x 1 1/3 with Bottom Stud Holder | 79180 | Nero | 4× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Nero | 2× |
| Technic Axle 4 | 3705 | Nero | 5× |
| Technic Axle 6 | 3706 | Nero | 3× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Nero | 3× |
| Technic Axle 2 Notched | 32062 | Nero | 8× |
| Technic Beam 1 x 5 Thick | 32316 | Nero | 2× |
| Technic Cam | 6575 | Nero | 4× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Nero | 5× |
| Technic Ball Joint with Through Axle Hole | 53585 | Nero | 13× |
| TECHNIC 9M BEAM | 64289 | Nero | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Nero | 3× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Nero | 4× |
| CROSS BLOCK/FORM 2X2X2 | 42193 | Nero | 3× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Nero | 30× |
| CROSS HOLES W/ DOUBLE, DIA. 3.2 SHAFT | 49133 | Nero | 1× |
| Wheel 11 x 8 with Center Groove | 42610 | Nero | 2× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Nero | 3× |
| TECHNIC LEVER 3M | 65123 | Nero | 2× |
| BUSH FOR CROSS AXLE | 42798 | Nero | 1× |
| HALFBEAM CURVE 3X3 | 65125 | Nero | 2× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Nero | 9× |
| TECHNIC LEVER 2M | 44862 | Nero | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Nero | 4× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Nero | 1× |
| Technic Steering Arm 3 x 1 with Towball Socket | 5997 | Nero | 4× |
| Technic Beam 1 x 2 with Axle on Side | 7244 | Nero | 1× |
| Plate 2 x 2 | 3022 | Beige | 1× |
| Plate 2 x 3 | 3021 | Beige | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Beige | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Beige | 2× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Beige | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Beige | 1× |
| Tile 2 x 3 | 26603 | Beige | 2× |
| Plant, Flower, Plate Round 1 x 1 with 5 Petals | 24866 | Blu scuro | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Nero | 6× |
| ELEMENT SEPARATOR | 31510 | Arancione | 1× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Arancione | 1× |
| Plate 2 x 3 | 3021 | Rosso | 2× |
| PLATE 2X2 ROUND | 4032 | Rosso | 3× |
| Brick Special 1 x 1 with Studs on 2 Sides | 47905 | Rosso | 2× |
| Plant, Flower, Plate Round 1 x 1 with 5 Petals | 24866 | Rosso | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Rosso | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Rosso | 1× |
| Technic Axle 2 Notched | 32062 | Rosso | 13× |
| Technic Axle 4 | 3705 | Rosso | 5× |
| Technic Axle 6 | 3706 | Rosso | 1× |
| Technic Pin 1/2 with Friction | 89678 | Rosso | 18× |
| Tile 1 x 6 with Groove | 6636 | Giallo | 1× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Giallo | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Giallo | 4× |
| MINI HEAD, NO. 3977 | 102833 | Giallo | 1× |
| MINI HEAD, NO. 3979 | 102837 | Giallo | 1× |
| Technic Axle 3 | 4519 | Giallo | 3× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Nero | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Nero | 4× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Nero | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Nero | 2× |
| Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3 | 64644 | Beige | 1× |
| Radiator Grille 1x2 | 2412 | Grigio bluastro scuro | 4× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Grigio bluastro scuro | 2× |
| Plate 1 x 4 | 3710 | Grigio bluastro scuro | 14× |
| Tile 1 x 8 with Groove | 4162 | Grigio bluastro scuro | 1× |
| PLATE 2X2 ROUND | 4032 | Grigio bluastro scuro | 5× |
| Plate 2 x 3 | 3021 | Grigio bluastro scuro | 2× |
| FLAT TILE 2X2 | 3068 | Grigio bluastro scuro | 2× |
| Plate 2 x 4 | 3020 | Grigio bluastro scuro | 5× |
| ROUND BRICK 1X1 | 3062 | Grigio bluastro scuro | 2× |
| Plate 2 x 2 | 3022 | Grigio bluastro scuro | 8× |
| Slope Inverted 45° 2 x 1 | 3665 | Grigio bluastro scuro | 2× |
| Plate 4 x 6 | 3032 | Grigio bluastro scuro | 3× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Grigio bluastro scuro | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Grigio bluastro scuro | 1× |
| Plate 1 x 10 | 4477 | Grigio bluastro scuro | 1× |
| BRICK 2X2 W/ BALL Ø 10.2 | 57909 | Grigio bluastro scuro | 2× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Grigio bluastro scuro | 20× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Grigio bluastro scuro | 4× |
| Slope Inverted 45° 6 x 4 Double with 4 x 4 Recessed and 3 Holes | 60219 | Grigio bluastro scuro | 1× |
| Tile 1 x 3 | 63864 | Grigio bluastro scuro | 5× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Grigio bluastro scuro | 10× |
| Tile Special 2 x 2 Inverted | 11203 | Grigio bluastro scuro | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Grigio bluastro scuro | 5× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Grigio bluastro scuro | 6× |
| Tile Round 2 x 2 with Hole | 15535 | Grigio bluastro scuro | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Grigio bluastro scuro | 5× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Grigio bluastro scuro | 8× |
| Plate 1 x 12 | 60479 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Grigio bluastro scuro | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Grigio bluastro scuro | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Grigio bluastro scuro | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Grigio bluastro scuro | 4× |
| BRICK 2X2 Ø4.85 HORIZ. SNAP | 48442 | Grigio bluastro scuro | 4× |
| FLAT TILE 1X1, ROUND | 35381 | Grigio bluastro scuro | 4× |
| PLATE 1X1 W. HOLDER | 44860 | Grigio bluastro scuro | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Grigio bluastro scuro | 27× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Grigio bluastro scuro | 8× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Grigio bluastro scuro | 1× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Grigio bluastro scuro | 2× |
| 3.2 SHAFT W/ 5.9 BALL | 67692 | Grigio bluastro scuro | 2× |
| Brick Special 1 x 2 x 1 1/3 with Rotation Joint Socket | 80431 | Grigio bluastro scuro | 10× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Grigio bluastro scuro | 10× |
| Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts | 1750 | Grigio bluastro scuro | 2× |
| Technic Beam 1 x 2 with Ball Joint Angled | 50923 | Grigio bluastro scuro | 2× |
| Technic Axle 8 with Stop | 55013 | Grigio bluastro scuro | 4× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Grigio bluastro scuro | 1× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Grigio bluastro scuro | 1× |
| CROSS BLOCK 90° | 40146 | Grigio bluastro scuro | 1× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Grigio bluastro scuro | 4× |
| Rotation Joint Socket with 2 Pins | 80563 | Grigio bluastro scuro | 8× |
| Plate 1 x 3 | 3623 | Magenta | 5× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Magenta | 4× |
| Plate 1 x 2 | 3023 | Magenta | 1× |
| Plate 2 x 3 | 3021 | Magenta | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Rosa scuro | 5× |
| Plate 2 x 2 | 3022 | Magenta | 6× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Magenta | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Lavanda medio | 4× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Rosa scuro | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Rosa scuro | 2× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Magenta | 2× |
| Wedge Plate 2 x 2 Left | 24299 | Rosa scuro | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Rosa scuro | 1× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Chrome Pink | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Rosa scuro | 9× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Chrome Pink | 6× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Grigio bluastro scuro | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Grigio bluastro scuro | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Grigio bluastro chiaro | 2× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Nougat medio | 2× |
| ROUND BRICK 1X1 | 3062 | Medium Azur | 2× |
| Plate 2 x 4 | 3020 | Nero | 4× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Grigio bluastro chiaro | 4× |
| Tile 1 x 4 with Groove | 2431 | Grigio bluastro chiaro | 4× |
| Brick 2 x 4 | 3001 | Grigio bluastro chiaro | 1× |
| Plate 2 x 4 | 3020 | Grigio bluastro chiaro | 8× |
| Plate 2 x 2 | 3022 | Grigio bluastro chiaro | 6× |
| ROUND BRICK 1X1 | 3062 | Grigio bluastro chiaro | 2× |
| FLAT TILE 2X2 | 3068 | Grigio bluastro chiaro | 6× |
| FLAT TILE 1X1 | 3070 | Grigio bluastro chiaro | 2× |
| Plate 1 x 6 | 3666 | Grigio bluastro chiaro | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Grigio bluastro chiaro | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Grigio bluastro chiaro | 2× |
| Plate 2 x 6 | 3795 | Grigio bluastro chiaro | 2× |
| PLATE 2X2 ROUND | 4032 | Grigio bluastro chiaro | 4× |
| Slope 33° 3 x 1 | 4286 | Grigio bluastro chiaro | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Grigio bluastro chiaro | 6× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Grigio bluastro chiaro | 3× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Grigio bluastro chiaro | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Grigio bluastro chiaro | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Grigio bluastro chiaro | 4× |
| Cone 1 x 1 [Top Groove] | 59900 | Grigio bluastro chiaro | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Grigio bluastro chiaro | 3× |
| Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 87544 | Grigio bluastro chiaro | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Grigio bluastro chiaro | 2× |
| Brick Round 2 x 2 [Grill] | 92947 | Grigio bluastro chiaro | 1× |
| Brick Round 2 x 2 Truncated Cone | 98100 | Grigio bluastro chiaro | 6× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Grigio bluastro chiaro | 4× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Grigio bluastro chiaro | 4× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Grigio bluastro chiaro | 8× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Grigio bluastro chiaro | 10× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Grigio bluastro chiaro | 8× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Grigio bluastro chiaro | 16× |
| Slope Curved 3 x 4 x 2/3 Triple Curved with 2 Sunk Studs | 93604 | Grigio bluastro chiaro | 4× |
| PLATE 1x2 W. HORIZONTAL HOLE Ø4,85 REV. | 28809 | Grigio bluastro chiaro | 2× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Grigio bluastro chiaro | 2× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Grigio bluastro chiaro | 10× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Grigio bluastro chiaro | 16× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Grigio bluastro chiaro | 7× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Grigio bluastro chiaro | 4× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Grigio bluastro chiaro | 2× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Grigio bluastro chiaro | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Grigio bluastro chiaro | 4× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Grigio bluastro chiaro | 1× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Grigio bluastro chiaro | 30× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Grigio bluastro chiaro | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Grigio bluastro chiaro | 2× |
| PLATE 2X2 W. BALL | 3768 | Grigio bluastro chiaro | 2× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Grigio bluastro chiaro | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Grigio bluastro chiaro | 6× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Grigio bluastro chiaro | 4× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Grigio bluastro chiaro | 4× |
| Technic Pin 1/2 | 4274 | Grigio bluastro chiaro | 8× |
| Technic Axle 5 | 32073 | Grigio bluastro chiaro | 1× |
| Technic Axle 3 | 4519 | Grigio bluastro chiaro | 2× |
| CROSS BLOCK 90° | 40146 | Grigio bluastro chiaro | 2× |
| ANGLE ELEMENT 135 DEG. [4] | 42156 | Grigio bluastro chiaro | 2× |
| 1/2 BUSH | 42136 | Grigio bluastro chiaro | 3× |
| CROSS BLOCK/FORM 2X2X2 | 42193 | Grigio bluastro chiaro | 5× |
| MINI HELMET, NO. 473 | 5990 | Nero | 1× |
| Weapon Sword with Jagged Edges, Double Axle Hole | 79895 | Rosso | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Nero | 5× |
| Plate 1 x 4 | 3710 | Nero | 4× |
| Plate 1 x 6 | 3666 | Nero | 1× |
| Plate 2 x 4 | 3020 | Nero | 6× |
| Plate 1 x 3 | 3623 | Nero | 7× |
| FLAT TILE 2X2 | 3068 | Rosso scuro | 1× |
| Plate 1 x 1 | 3024 | Nero | 1× |
| Slope Curved 3 x 1 No Studs | 50950 | Nero | 1× |
| Plate 2 x 2 Corner | 2420 | Nero | 4× |
| Slope 33° 3 x 1 | 4286 | Nero | 3× |
| Slope Curved 2 x 2 with Lip, No Studs | 30602 | Nero | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Nero | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Nero | 4× |
| Brick 2 x 4 | 3001 | Nero | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Rosso scuro | 1× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Rosso scuro | 1× |
| Slope Curved 2 x 1 Inverted | 24201 | Nero | 4× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Nero | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Nero | 2× |
| Brick 1 x 3 | 3622 | Nero | 2× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Rosso scuro | 1× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Nero | 11× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Rosso scuro | 4× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Nero | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Nero | 2× |
| PLATE 1X2 W. 1 HORIZONTAL SNAP | 65458 | Rosso scuro | 2× |
| PLATE 1X1 W. HOLDER | 44860 | Rosso scuro | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Nero | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Nero | 4× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Nero | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Nero | 7× |
| Slope Curved 4 x 3 with 3 Layers, 1 x 3 Cutout on Underside | 66955 | Nero | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Nero | 1× |
| Wedge Plate 2 x 2 Left | 24299 | Nero | 1× |
| Plate Round Corner 4 x 4 | 30565 | Nero | 4× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Nero | 1× |
| Slope 1 x 4 with 1 x 2 Cutout | 5654 | Nero | 2× |
| Bar 2L with Stop in Center | 78258 | Nero | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Nero | 9× |
| Technic Axle 3 with Stop | 24316 | Marrone rossastro | 1× |
| Plate 2 x 4 | 3020 | Beige scuro | 6× |
| Plate 2 x 2 Corner | 2420 | Beige scuro | 4× |
| Plate 2 x 2 | 3022 | Beige scuro | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Beige scuro | 18× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Beige scuro | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Beige scuro | 2× |
| CROSSAXLE 3M WITH KNOB | 13670 | Beige scuro | 4× |
| Fric. element, cylinder | 65443 | Silver Metallic | 4× |
| Weapon Sword (Uruk-hai) | 10050 | Pearl Titanium | 1× |
| FLAT TILE 1X1, ROUND | 35380 | Trans-trasparente | 11× |
| PLATE 1X1 | 28554 | Transparent Bright Orange | 1× |
| SLIDE SHOE ROUND 2X2 | 28558 | Transparent Bright Orange | 4× |
| PLATE 1X2 | 28653 | Transparent Bright Orange | 4× |
| Nose Cone Small 1x1 | 28701 | Transparent Bright Orange | 4× |
| FLAT TILE 1X1, ROUND | 35380 | Transparent Bright Orange | 4× |
| PLATE 1X1 | 28554 | Trans-verde neon | 1× |
| PLATE 1X2 | 28653 | Trans-verde neon | 4× |
| FLAT TILE 1X2 | 35386 | Trans-verde neon | 3× |
| Minifig Head [Plain] [Vented Stud - 2 Holes] | 28621 | Nero | 1× |
| SLIDE SHOE ROUND 2X2 | 28558 | Nero | 1× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Giallo | 2× |
| Radiator Grille 1x2 | 2412 | Medium Lime | 14× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Giallo | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Giallo | 4× |
| Ring 4 x 4 with 2 x 2 Opening and 4 Arrow Ends (Ninjago Spinner Crown) | 98341 | Oro perlato | 2× |
| ROUND BRICK 1X1 | 3062 | Medium Lime | 2× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Giallo | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Giallo | 1× |
| FLAT TILE 1X2 | 3069 | Medium Lime | 2× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Lime | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Medium Lime | 9× |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 15208 | Oro perlato | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Giallo | 12× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Giallo | 5× |
| Plate 1 x 2 | 3023 | Giallo | 6× |
| BAD ROBOT ARM | 49753 | Medium Lime | 6× |
| Weapon Sword, Big Blade with Bar | 98137 | Oro perlato | 4× |
| QUASTE | 28836 | Medium Lime | 1× |
| Plate Special 1 x 2 Side Handle [Free Ends] | 2540 | Giallo | 8× |
| CLAW, W/ 3.2 SNAP | 30936 | Medium Lime | 5× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Medium Lime | 9× |
| Plate Special 1 x 2 with Door Rail | 32028 | Giallo | 6× |
| PLATE W. BOWS 2X1½ | 81300 | Medium Lime | 12× |
| Animal / Creature Body Part, Claw with Clip | 3171 | Oro perlato | 6× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Giallo | 6× |
| Wedge Sloped 4 x 4 Triple with 3 Ridges on Slope | 86148 | Oro perlato | 2× |
| Plate Round 1 x 2 Half Circle with Stud (Jumper) | 1745 | Giallo | 4× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Giallo | 3× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Giallo | 3× |
| Weapon Spike Flexible 3.5L | 64727 | Giallo | 3× |
| Tile Round 1 x 1 Quarter | 25269 | Giallo | 8× |
| Chain 2L with Bars | 6981 | Oro perlato | 1× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Giallo | 2× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Giallo | 1× |
| TUBE, W/ DOUBLE 4.85 HOLE | 29219 | Medium Lime | 3× |
| Plate 2 x 2 Corner | 2420 | Bianco | 4× |
| Plate 2 x 3 | 3021 | Bianco | 2× |
| Plate 1 x 2 | 3023 | Bianco | 8× |
| Plate 1 x 3 | 3623 | Bianco | 2× |
| Plate 1 x 6 | 3666 | Bianco | 1× |
| PLATE 2X2 ROUND | 4032 | Bianco | 2× |
| Brick Special 1 x 1 with Headlight | 4070 | Bianco | 4× |
| ROOF TILE 1X3/25° INV. | 4287 | Bianco | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Bianco | 2× |
| ROOF TILE 2X2X2/65 DEG. | 3678 | Bianco | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Bianco | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Bianco | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Bianco | 4× |
| Plate 1 x 12 | 60479 | Bianco | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Bianco | 6× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Bianco | 4× |
| Plate Special 1 x 2 with Angled Handles on Side | 92692 | Bianco | 2× |
| Brick Special 1 x 2 with Studs on 2 Sides | 52107 | Bianco | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Bianco | 3× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Bianco | 4× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Bianco | 4× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Bianco | 1× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Bianco | 6× |
| ATTIC 1X2/45° | 3049 | Bianco | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Bianco | 16× |
| Wedge Plate 2 x 2 Left | 24299 | Bianco | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Bianco | 2× |
| Wedge 2 x 2 Facet | 87620 | Bianco | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Bianco | 2× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Bianco | 8× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Bianco | 8× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Bianco | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Bianco | 8× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Bianco | 9× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Bianco | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Bianco | 4× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Bianco | 4× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Bianco | 4× |
| Grille / Spoiler with 1 x 2 Plate, 2 x 2 Anti-studs (Racers Car) | 50949 | Bianco | 2× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Bianco | 2× |
| Plate 1x1 w/ 1.5 Hole | 35344 | Bianco | 4× |
| PLATE 1X1 W/HOLDER VERTICAL | 52738 | Bianco | 2× |
| Plate 1 x 5 | 78329 | Bianco | 4× |
| Flag 2 x 2 Trapezoid with Flared Area between Clips | 80324 | Bianco | 6× |
| PLATE W. BOWS 2X1½ | 81300 | Bianco | 3× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Bianco | 8× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Bianco | 4× |
| Brick Special 1 x 2 with Rotation Joint Pin | 4920 | Bianco | 6× |
| Technic Brick 1 x 3 [3 Pin Holes] | 5565 | Bianco | 4× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Bianco | 2× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Bianco | 2× |
| Windscreen 6 x 4 x 1 Hexagonal with Handle | 27262 | Bianco | 1× |
| Technic Panel Fairing #6 Long Smooth, Side B | 64393 | Bianco | 3× |
| Technic Panel Fairing #5 Long Smooth, Side A | 64681 | Bianco | 3× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Bianco | 1× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Bianco | 1× |
| Technic Pin 1/2 | 4274 | Bianco | 3× |
DNA della build
Dettagli inventario pezzi per The Twin Titan Mechs
Con 1706 pezzi, questa build e +274% rispetto al set Ninjago medio e +172% rispetto alla media dei set del 2026.
Rispetto al set Ninjago medio
Set Ninjago medio: 456 pezzi su 408 altri set.
Rispetto al set medio del 2026
Set medio del 2026: 627 pezzi su 423 altri set.
Profilo colori
Colore dominante
Nero
Pezzi unici
6.9 pezzi per tipo unico
Fattore ripetizione
Media pezzi per tipo unico.
Pezzo piu usato
Plate Special 1 x 2 Rounded with 2 Open Studs
73xI risultati si basano sugli inventari ufficiali LEGO. La precisione migliora man mano che confermi la completezza dei set.
Questo sito non è affiliato né approvato dal Gruppo LEGO.









