


Concorde (10318-1) is een LEGO Icons set met de nadruk op displaywaarde, herkenbare vormen en een volwassen bouwervaring. Het model is bedoeld als blikvanger voor fans die een onderwerp uit cultuur, design, film of dagelijks leven in LEGO-vorm willen neerzetten.
Onderdelen inventaris
| Onderdeel | Kleur | Aantal |
|---|---|---|
![]() Tile 6 x 6 with Bottom Tubes 10202 | Wit | 2× |
![]() Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] 10247 | Geel | 1× |
![]() Windscreen Cylinder 4 x 4 x 2 with Trans-Black Windows pattern 103918pat0001 | Wit | 1× |
![]() Technic Gear 8 Tooth [Reinforced] 10928 | Donkerblauwgrijs | 1× |
![]() Bar Holder with Clip 11090 | Wit | 1× |
![]() Tile Special 2 x 2 Inverted 11203 | Wit | 1× |
![]() Tile Special 2 x 2 Inverted 11203 | Zwart | 2× |
![]() Tile Special 2 x 2 Inverted 11203 | Lichtblauwgrijs | 2× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Donkerblauw | 3× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Geel | 2× |
10 van 411 onderdelen getoond
🔓 Meld je aan om alle onderdelen te zien| Tile Special 2 x 2 Inverted | 11203 | Wit | 1× |
| Tile Special 2 x 2 Inverted | 11203 | Zwart | 2× |
| Tile Special 2 x 2 Inverted | 11203 | Lichtblauwgrijs | 2× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Donkerblauw | 3× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Geel | 2× |
| Plate 3 x 3 | 11212 | Wit | 5× |
| Plate 3 x 3 | 11212 | Donkerblauwgrijs | 5× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Zwart | 1× |
| Technic Pin Connector Perpendicular 2 x 4 Bent - Beam with 90 Hole Ø 4.8 | 11455 | Zwart | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Geel | 2× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Wit | 6× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Lichtblauwgrijs | 3× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Wit | 13× |
| Technic Beam 1 x 5 Thin with Axle Holes on Ends | 11478 | Wit | 4× |
| Slope Curved 4 x 1 Inverted | 13547 | Wit | 2× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Lichtblauwgrijs | 2× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Wit | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Lichtblauwgrijs | 1× |
| Panel 1 x 4 x 2 with Side Supports - Hollow Studs | 14718 | Wit | 4× |
| Tile 2 x 2 Corner | 14719 | Wit | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zwart | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Wit | 66× |
| Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 15207 | Wit | 2× |
| Technic Axle 5 with Stop | 15462 | Roodbruin | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Wit | 8× |
| Tile Round 1 x 2 Half Circle | 1748 | Wit | 1× |
| Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts | 1750 | Zwart | 2× |
| Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 18575 | Zandkleur | 2× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Geel | 4× |
| Brick Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports | 18838 | Lichtblauwgrijs | 2× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Rood | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Zandkleur | 4× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Geel | 1× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Wit | 4× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Wit | 2× |
| Brick 2 x 2 Corner | 2357 | Roodbruin | 2× |
| Brick 2 x 2 Corner | 2357 | Wit | 14× |
| Technic Axle 11 | 23948 | Geel | 1× |
| Slope 45° 2 x 6 | 23949 | Donkerblauwgrijs | 1× |
| Panel 1 x 3 x 1 | 23950 | Wit | 2× |
| Plate 2 x 2 Corner | 2420 | Zwart | 6× |
| Plate 2 x 2 Corner | 2420 | Wit | 16× |
| Plate 2 x 2 Corner | 2420 | Rood | 4× |
| Tile Round 1 x 1 Half Circle | 24246 | Donkerblauw | 3× |
| Tile Round 1 x 1 Half Circle | 24246 | Wit | 4× |
| Wedge Plate 2 x 2 Left | 24299 | Donkerblauwgrijs | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Donkerblauwgrijs | 1× |
| Slope Curved 3 x 2 No Studs | 24309 | Lichtblauwgrijs | 4× |
| Tile 1 x 4 with Groove | 2431 | Zwart | 1× |
| Tile 1 x 4 with Groove | 2431 | Donkerblauw | 2× |
| Technic Axle 3 with Stop | 24316 | Roodbruin | 3× |
| Plate 2 x 12 | 2445 | Rood | 1× |
| Plate 2 x 12 | 2445 | Lichtblauwgrijs | 1× |
| Brick 1 x 16 | 2465 | Wit | 12× |
| Brick 1 x 16 | 2465 | Zwart | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Wit | 10× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Wit | 13× |
| Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 26599 | Zwart | 6× |
| Tile 2 x 3 | 26603 | Lichtblauwgrijs | 2× |
| Tile 2 x 3 | 26603 | Wit | 4× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Wit | 2× |
| Technic Worm Gear Short | 27938 | Donkerblauwgrijs | 1× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Zwart | 1× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Zwart | 2× |
| Plate Special 2 x 2 with 2 Pin Holes | 2817 | Zwart | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Wit | 5× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Zwart | 2× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Wit | 6× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Wit | 5× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Wit | 5× |
| Slope 55° 1 x 6 x 5 with Bottom Stud Holders | 2937 | Wit | 4× |
| Brick 2 x 4 | 3001 | Wit | 5× |
| Brick 2 x 4 | 3001 | Zwart | 3× |
| Brick 2 x 3 | 3002 | Donkerblauwgrijs | 1× |
| Brick 2 x 3 | 3002 | Lichtblauwgrijs | 1× |
| Brick 2 x 3 | 3002 | Roodbruin | 4× |
| Brick 2 x 2 | 3003 | Zwart | 1× |
| Brick 1 x 2 | 3004 | Rood | 2× |
| Brick 1 x 2 | 3004 | Wit | 21× |
| Brick 1 x 2 | 3004 | Roodbruin | 4× |
| Brick 1 x 2 | 3004 | Donkerblauwgrijs | 10× |
| Brick 1 x 2 | 3004 | Oranje | 4× |
| Brick 1 x 2 | 3004 | Donkerblauw | 1× |
| Brick 1 x 1 | 3005 | Wit | 21× |
| Brick 1 x 1 | 3005 | Lichtblauwgrijs | 4× |
| Brick 2 x 8 | 3007 | Roodbruin | 1× |
| Brick 1 x 8 | 3008 | Donkerblauw | 1× |
| Brick 1 x 8 | 3008 | Wit | 13× |
| Brick 1 x 8 | 3008 | Zandkleur | 2× |
| Brick 1 x 8 | 3008 | Roodbruin | 1× |
| Brick 1 x 8 with White 'Concorde' print | 3008pr0075 | Donkerblauw | 1× |
| Brick 1 x 6 | 3009 | Oranje | 2× |
| Brick 1 x 6 | 3009 | Zwart | 8× |
| Brick 1 x 6 | 3009 | Wit | 19× |
| Brick 1 x 6 | 3009 | Donkerblauwgrijs | 1× |
| Brick 1 x 6 | 3009 | Donkerblauw | 1× |
| Brick 1 x 4 | 3010 | Donkerblauw | 1× |
| Brick 1 x 4 | 3010 | Wit | 10× |
| Plate 2 x 4 | 3020 | Zwart | 9× |
| Plate 2 x 4 | 3020 | Wit | 7× |
| Plate 2 x 4 | 3020 | Lichtblauwgrijs | 9× |
| Plate 2 x 4 | 3020 | Roodbruin | 4× |
| Plate 2 x 3 | 3021 | Rood | 5× |
| Plate 2 x 3 | 3021 | Wit | 8× |
| Plate 2 x 3 | 3021 | Zwart | 5× |
| Plate 2 x 3 | 3021 | Geel | 1× |
| Plate 2 x 2 | 3022 | Lichtblauwgrijs | 11× |
| Plate 2 x 2 | 3022 | Wit | 7× |
| Plate 2 x 2 | 3022 | Rood | 9× |
| Plate 1 x 2 | 3023 | Wit | 58× |
| Plate 1 x 2 | 3023 | Rood | 7× |
| Plate 1 x 2 | 3023 | Zwart | 37× |
| Plate 1 x 2 | 3023 | Donkerblauw | 2× |
| Plate 1 x 2 | 3023 | Lichtblauwgrijs | 3× |
| Plate 1 x 2 | 3023 | Zwart | 25× |
| Plate 1 x 1 | 3024 | Wit | 28× |
| Plate 1 x 1 | 3024 | Donkerblauw | 2× |
| Plate 1 x 1 | 3024 | Trans-geel | 2× |
| Plate 4 x 4 | 3031 | Lichtblauwgrijs | 2× |
| Plate 4 x 4 | 3031 | Wit | 2× |
| Plate 4 x 6 | 3032 | Donkerblauwgrijs | 1× |
| Plate 4 x 6 | 3032 | Wit | 1× |
| Plate 2 x 8 | 3034 | Lichtblauwgrijs | 1× |
| Plate 2 x 8 | 3034 | Wit | 2× |
| Plate 2 x 8 | 3034 | Rood | 2× |
| Plate 4 x 8 | 3035 | Wit | 1× |
| Plate 4 x 8 | 3035 | Roodbruin | 1× |
| Plate 6 x 8 | 3036 | Wit | 2× |
| Bar 4L (Lightsaber Blade / Wand) | 30374 | Roodbruin | 3× |
| Slope 45° 2 x 1 with Bottom Pin | 3040b | Wit | 4× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Lichtblauwgrijs | 4× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Zwart | 9× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Wit | 1× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Rood | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Zwart | 10× |
| Brick 1 x 4 without Bottom Tubes | 3066 | Trans-zwart | 1× |
| Tile 2 x 2 with Groove | 3068b | Wit | 4× |
| Tile 2 x 2 with Groove | 3068b | Lichtblauwgrijs | 2× |
| Tile 1 x 2 with Groove | 3069b | Wit | 24× |
| Tile 1 x 2 with Groove | 3069b | Rood | 4× |
| Tile 1 x 2 with Groove | 3069b | Donkerblauwgrijs | 1× |
| Tile 1 x 1 with Groove | 3070b | Wit | 4× |
| Tile 1 x 1 with Groove | 3070b | Lichtblauwgrijs | 10× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Rood | 4× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Lichtblauwgrijs | 2× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Geel | 2× |
| Technic Pin 3/4 | 32002 | Zandkleur | 1× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Wit | 4× |
| Technic Axle and Pin Connector Angled #6 - 90° | 32014 | Wit | 2× |
| Plate Special 1 x 2 with Door Rail | 32028 | Zwart | 8× |
| Plate Special 1 x 2 with Door Rail | 32028 | Oranje | 6× |
| Technic Axle and Pin Connector Angled #2 - 180° | 32034 | Oranje | 1× |
| Technic Axle 2 Notched | 32062 | Rood | 3× |
| Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin | 32064a | Wit | 2× |
| Technic Beam 1 x 7 Thin | 32065 | Wit | 1× |
| Technic Axle 5 | 32073 | Geel | 1× |
| Technic Axle 5 | 32073 | Lichtblauwgrijs | 4× |
| Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 32123b | Wit | 6× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Zwart | 2× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Zwart | 1× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Wit | 2× |
| Brick 1 x 2 x 2 with Inside Stud Holder | 3245c | Zwart | 2× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Rood | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Wit | 8× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Zwart | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Lichtblauwgrijs | 9× |
| Technic Worm Gear Type 2 | 32905 | Lichtblauwgrijs | 1× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Wit | 3× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Donkerblauwgrijs | 4× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Wit | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Zwart | 18× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Zwart | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Donkerblauwgrijs | 11× |
| Tile Special 2 x 4 Inverted | 3395 | Wit | 6× |
| Tile Special 2 x 4 Inverted | 3395 | Zwart | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Wit | 2× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Zwart | 8× |
| Wheel 8 x 6 with Slot | 34337 | Lichtblauwgrijs | 2× |
| Plate 1 x 8 | 3460 | Rood | 2× |
| Plate 1 x 8 | 3460 | Wit | 7× |
| Plate 1 x 8 | 3460 | Geel | 2× |
| Plate 1 x 8 | 3460 | Oranje | 8× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Rood | 2× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Wit | 10× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Donkerblauw | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zandkleur | 8× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Wit | 2× |
| Cone 4 x 4 x 3 with Axle Hole | 3569 | Wit | 2× |
| Brick 1 x 3 | 3622 | Wit | 20× |
| Brick 1 x 3 | 3622 | Roodbruin | 2× |
| Brick 1 x 3 | 3622 | Donkerblauw | 3× |
| Brick 1 x 3 | 3622 | Zwart | 4× |
| Plate 1 x 3 | 3623 | Zandkleur | 8× |
| Plate 1 x 3 | 3623 | Wit | 8× |
| Plate 1 x 3 | 3623 | Zwart | 8× |
| Plate 1 x 3 | 3623 | Rood | 4× |
| Technic Gear 24 Tooth [New Style with Single Axle Hole] | 3648b | Donkerblauwgrijs | 1× |
| Brick Arch 1 x 4 | 3659 | Lichtblauwgrijs | 6× |
| Plate 1 x 6 | 3666 | Wit | 16× |
| Plate 1 x 6 | 3666 | Zandkleur | 10× |
| Plate 1 x 6 | 3666 | Donkerblauw | 2× |
| Brick Special 2 x 6 x 1 1/3 with Axle Holes and 2 x 4 Recessed, Ridges at Underside | 3668 | Donkerblauwgrijs | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Zwart | 4× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Zwart | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Rood | 6× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Donkerblauw | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Zwart | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Lichtblauwgrijs | 10× |
| Technic Axle 4 | 3705 | Rood | 5× |
| Technic Axle 6 | 3706 | Rood | 2× |
| Technic Axle 8 | 3707 | Zwart | 1× |
| Technic Axle 12 | 3708 | Zwart | 1× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Wit | 2× |
| Plate 1 x 4 | 3710 | Donkerblauw | 2× |
| Plate 1 x 4 | 3710 | Zwart | 29× |
| Plate 1 x 4 | 3710 | Lichtblauwgrijs | 3× |
| Plate 1 x 4 | 3710 | Wit | 24× |
| Plate 1 x 4 | 3710 | Oranje | 4× |
| Technic Bush | 3713 | Rood | 2× |
| Technic Bush | 3713 | Lichtblauwgrijs | 2× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Zandkleur | 2× |
| Plate 2 x 6 | 3795 | Zwart | 2× |
| Plate 2 x 6 | 3795 | Rood | 1× |
| Plate 2 x 6 | 3795 | Wit | 14× |
| Plate 2 x 6 | 3795 | Zandkleur | 2× |
| Plate 2 x 10 | 3832 | Zwart | 2× |
| Cone 2 x 2 x 2, Open Stud | 3942c | Wit | 2× |
| Plate 6 x 6 | 3958 | Wit | 1× |
| Technic Pin Long without Friction Ridges, with Anti-Roll Notch | 39888 | Zandkleur | 2× |
| Brick Special 1 x 1 with Headlight | 4070 | Zwart | 4× |
| Brick Special 1 x 1 with Headlight | 4070 | Wit | 2× |
| Tile 1 x 8 with Groove | 4162 | Wit | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Lichtblauwgrijs | 3× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Donkerblauwgrijs | 3× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Rood | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Wit | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Wit | 1× |
| Brick Curved 6 x 1 Inverted | 42023 | Wit | 2× |
| Technic Axle Connector with Axle Hole [Reinforced] | 42135 | Lichtblauwgrijs | 1× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Zwart | 7× |
| Wheel 11 x 8 with Center Groove | 42610 | Lichtblauwgrijs | 8× |
| Technic Pin 1/2 | 4274 | Wit | 6× |
| Plate 2 x 16 | 4282 | Lichtblauwgrijs | 5× |
| Slope 33° 3 x 1 | 4286 | Donkerblauw | 1× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Zwart | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Zwart | 8× |
| Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Top | 43045 | Zwart | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 3× |
| Technic Axle 7 | 44294 | Lichtblauwgrijs | 2× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Donkerblauw | 1× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Wit | 18× |
| Slope 75° 2 x 1 x 3 with Hollow Stud | 4460b | Roodbruin | 4× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Zwart | 3× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Rood | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Wit | 6× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Lichtblauwgrijs | 6× |
| Plate 1 x 10 | 4477 | Wit | 14× |
| Plate 1 x 10 | 4477 | Lichtblauwgrijs | 8× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 44874 | Rood | 1× |
| Technic Axle 3 | 4519 | Lichtblauwgrijs | 3× |
| Technic Axle 3 | 4519 | Geel | 4× |
| Slope Curved 8 x 6 x 2 Double | 45411 | Wit | 2× |
| Slope Curved 8 x 6 x 2 Double with 7 Light Bluish grey Airplane Windows print | 45411pr0004 | Wit | 7× |
| Slope 1 x 6 x 1 with 1 x 2 x 1/3 Cutout | 4569 | Donkerblauw | 1× |
| Wedge Plate 12 x 3 Left | 47397 | Wit | 2× |
| Wedge Plate 12 x 3 Left | 47397 | Oranje | 2× |
| Wedge Plate 12 x 3 Right | 47398 | Wit | 2× |
| Wedge Plate 12 x 3 Right | 47398 | Oranje | 2× |
| Dish 2 x 2 Inverted [Radar] | 4740 | Trans-oranje | 4× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Donkerblauwgrijs | 1× |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket | 48169 | Donkerblauwgrijs | 1× |
| Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] | 48171 | Zwart | 1× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Wit | 2× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Rood | 1× |
| Wheel Arch, Mudguard 2 x 3 x 1 1/3 with 2 x 2 Plate | 49097 | Wit | 1× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Geel | 2× |
| Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 49307 | Donkerblauw | 3× |
| Brick 1 x 4 x 3 | 49311 | Wit | 6× |
| Wedge Curved 10 x 3 Left with Narrowing Red Stripe, Black 'Concorde' print | 50955pr0003 | Wit | 1× |
| Wedge Curved 10 x 3 Right with Narrowing Red Stripe, Black 'Concorde' print | 50956pr0003 | Wit | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Wit | 18× |
| Technic Axle 8 with Stop | 55013 | Donkerblauwgrijs | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Lichtblauwgrijs | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Geel | 8× |
| Tyre 14 x 4 Smooth Small Single [New Style] | 59895 | Zwart | 2× |
| Cone 1 x 1 [Top Groove] | 59900 | Wit | 1× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Wit | 1× |
| Slope 18° 4 x 1 | 60477 | Zwart | 2× |
| Slope 18° 4 x 1 | 60477 | Wit | 1× |
| Slope 18° 4 x 1 | 60477 | Donkerblauw | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Rood | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Wit | 11× |
| Plate 1 x 12 | 60479 | Rood | 10× |
| Plate 1 x 12 | 60479 | Wit | 6× |
| Slope 65° 2 x 1 x 2 | 60481 | Wit | 12× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Zwart | 4× |
| Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 60483 | Wit | 4× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Zwart | 1× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Wit | 2× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Zwart | 6× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Zwart | 4× |
| Brick 1 x 10 | 6111 | Wit | 12× |
| Brick 1 x 12 | 6112 | Lichtblauwgrijs | 2× |
| Brick 1 x 12 | 6112 | Wit | 10× |
| Brick 1 x 12 | 6112 | Zandkleur | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Zwart | 22× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Wit | 3× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Donkerblauwgrijs | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rood | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Geel | 22× |
| Technic Pin with Dual Wheels Holder | 61483 | Lichtblauwgrijs | 1× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Donkerblauwgrijs | 1× |
| Technic Universal Joint 3L [Complete Assembly] | 61903 | Lichtblauwgrijs | 1× |
| Panel 1 x 1 x 1 Corner | 6231 | Wit | 2× |
| Cone 3 x 3 x 2 | 6233 | Wit | 2× |
| Technic Pin Connector Round [Slotted] | 62462 | Rood | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Oranje | 1× |
| Technic Pin Connector Round [Slotted] | 62462 | Lichtblauwgrijs | 1× |
| Tile 1 x 3 | 63864 | Wit | 5× |
| Tile 1 x 3 | 63864 | Geel | 4× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Lichtblauwgrijs | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Geel | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Lichtblauwgrijs | 4× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Wit | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Zwart | 2× |
| Wedge Plate 2 x 4 27° Right | 65426 | Wit | 3× |
| Wedge Plate 2 x 4 27° Left | 65429 | Wit | 3× |
| Technic Axle 3 with Stud | 6587 | Donker zandkleur | 2× |
| Tile Special 2 x 3 with 2 Clips without Tab between Clips | 65886 | Wit | 2× |
| Technic Gear 12 Tooth Bevel | 6589 | Zandkleur | 2× |
| Technic Beam 1 x 3 Thin | 6632 | Zwart | 3× |
| Technic Beam 1 x 3 Thin | 6632 | Oranje | 1× |
| Tile 1 x 6 with Groove | 6636 | Wit | 8× |
| Tile 1 x 6 with Narrowing Red Stripe print | 6636pr0039 | Wit | 2× |
| Slope Curved 2 x 2 with Stud Notches | 66956 | Wit | 4× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Lichtblauwgrijs | 2× |
| Tile 2 x 6 | 69729 | Wit | 9× |
| Tile 2 x 6 | 69729 | Zwart | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Lichtblauwgrijs | 2× |
| Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 3 Support Walls on Bottom | 72132 | Wit | 1× |
| Slope Inverted 45° 4 x 4 Double with 2 Holes | 72454 | Wit | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Lichtblauwgrijs | 2× |
| Brick Round 3 x 3 x 2 Recessed Center with 2 x 2 Studs and Axle Hole | 73111 | Zwart | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Donkerblauwgrijs | 12× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Wit | 6× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Wit | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Donkerblauw | 1× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Lichtblauwgrijs | 6× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Zwart | 6× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Zwart | 2× |
| Plate 2 x 3 with 1 x 1 Cutout | 73831 | Lichtblauwgrijs | 1× |
| Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder | 76766 | Lichtblauwgrijs | 1× |
| Technic Pin Long 3l, No Friction Ridges, with Stop and Hole | 77765 | Lichtblauwgrijs | 6× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Zwart | 15× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Wit | 23× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Zandkleur | 2× |
| Bar 2L with Stop in Center | 78258 | Wit | 5× |
| Plate 1 x 5 | 78329 | Wit | 2× |
| Wedge Plate 6 x 2 Left | 78443 | Wit | 2× |
| Wedge Plate 6 x 2 Right | 78444 | Wit | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Rood | 8× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Zwart | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Wit | 45× |
| Brick Curved 1 x 4 x 2/3 Double, No Studs | 79756 | Wit | 9× |
| Windscreen 2 x 4 Half Dome with Light Bluish Grey Cockpit print | 81911pr0001 | Trans-zwart | 1× |
| Tile Special 4 x 8 Inverted with Gold 'Concorde', Stats on Black Background print | 83496pr0001 | Roodbruin | 1× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Wit | 64× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Rood | 4× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Wit | 12× |
| Tile 2 x 4 with Groove | 87079 | Donkerblauwgrijs | 9× |
| Tile 2 x 4 with Groove | 87079 | Roodbruin | 2× |
| Tile 2 x 4 with Red Stripe print | 87079pr0317 | Wit | 2× |
| Technic Axle 4 with Stop | 87083 | Donkerblauwgrijs | 5× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Lichtblauwgrijs | 6× |
| Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | 87552 | Wit | 4× |
| Bar 3L | 87994 | Parel goud | 4× |
| Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] | 88072 | Wit | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Wit | 32× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs with Black/Red Air Intakes print | 88930pr0023 | Wit | 1× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs with Black/Red Air Intakes print | 88930pr0024 | Wit | 1× |
| Technic Pin 1/2 with Friction | 89678 | Rood | 4× |
| Technic Pin 1/2 with Friction | 89678 | Donkerblauwgrijs | 3× |
| Technic Panel Fairing 2 x 1 x 1 | 89679 | Medium nougat | 12× |
| Brick Special 2 x 2 with Grooves and Axle Hole | 90258 | Zwart | 1× |
| Plate 2 x 14 | 91988 | Lichtblauwgrijs | 1× |
| Tyre 17.5 x 6 with Shallow Staggered Treads and Middle Band | 92409 | Zwart | 8× |
| Technic Axle and Pin Connector Perpendicular Split | 92907 | Lichtblauwgrijs | 1× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Wit | 6× |
| Bracket 1 x 2 - 2 x 4 | 93274 | Wit | 6× |
| Slope Curved 3 x 4 x 2/3 Triple Curved with 2 Sunk Studs | 93604 | Wit | 1× |
| Brick and Axle Separator v2.0 | 96874 | Oranje | 1× |
| Tile Round 1 x 1 | 98138 | Zwart | 4× |
| Tile Round 1 x 1 | 98138 | Zwart | 3× |
| Tile Round 1 x 1 | 98138 | Trans-geel | 1× |
| Slope 75° 2 x 2 x 3 [Solid Studs] | 98560 | Donkerblauwgrijs | 3× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Wit | 31× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Zwart | 5× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Lichtblauwgrijs | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Zwart | 8× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Mat zilver | 4× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Geel | 2× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Wit | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Zwart | 2× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Wit | 9× |
Bouw-DNA
Onderdeleninzichten voor Concorde
Met 2.083 onderdelen zit deze build -1% ten opzichte van de gemiddelde Icons set en +264% ten opzichte van de gemiddelde release uit 2023.
T.o.v. gemiddelde Icons set
Gemiddelde Icons set: 2.094 onderdelen over 80 andere sets.
T.o.v. gemiddelde set uit 2023
Gemiddelde set uit 2023: 573 onderdelen over 506 andere sets.
Kleurprofiel
Dominante kleur
Wit
Unieke onderdelen
7.9 onderdelen per uniek type
Herhalingsfactor
Gemiddeld aantal onderdelen per uniek type.
Meest gebruikte onderdeel
Plate 1 x 2
132xResultaten zijn gebaseerd op officiële LEGO onderdelen inventarissen. Nauwkeurigheid verbetert naarmate je set compleetheid bevestigt.
Deze site is niet gelieerd aan of goedgekeurd door de LEGO Groep.

![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]](https://cdn.rebrickable.com/media/parts/elements/6061025.jpg)

![Technic Gear 8 Tooth [Reinforced]](https://cdn.rebrickable.com/media/parts/elements/6012451.jpg)





