


Corvette (10321-1) is een LEGO Icons set met de nadruk op displaywaarde, herkenbare vormen en een volwassen bouwervaring. Het model is bedoeld als blikvanger voor fans die een onderwerp uit cultuur, design, film of dagelijks leven in LEGO-vorm willen neerzetten.
Onderdelen inventaris
| Onderdeel | Kleur | Aantal |
|---|---|---|
![]() Sticker Sheet for Set 10321-1 10104784 | Unknown | 1× |
![]() Tile Special 2 x 2 Inverted 11203 | Zwart | 2× |
![]() Brick Special 1 x 2 with 2 Studs on 1 Side 11211 | Zwart | 1× |
![]() Plate 3 x 3 11212 | Wit | 2× |
![]() Plate 3 x 3 11212 | Donkerblauwgrijs | 2× |
![]() Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle 11214 | Donkerblauwgrijs | 1× |
![]() Plate Special 1 x 2 with Pin Hole on Top 11458 | Donkerblauwgrijs | 10× |
![]() Plate Special 1 x 2 with Clip Horizontal on Side 11476 | Rood | 2× |
![]() Slope Curved 2 x 1 No Studs [1/2 Bow] 11477 | Zwart | 2× |
![]() Tile 2 x 2 Corner 14719 | Zwart | 6× |
10 van 327 onderdelen getoond
🔓 Meld je aan om alle onderdelen te zien| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 2 with Pin Hole on Top | 11458 | Donkerblauwgrijs | 10× |
| Plate Special 1 x 2 with Clip Horizontal on Side | 11476 | Rood | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 2× |
| Tile 2 x 2 Corner | 14719 | Zwart | 6× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Metallic zilver | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Zwart | 1× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Donkerblauwgrijs | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Rood | 6× |
| Tile Round 2 x 2 with Hole with Silver Circle print | 15535pr0009 | Rood | 4× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Zwart | 11× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Rood | 10× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Wit | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Lichtblauwgrijs | 7× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Rood | 12× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Zwart | 2× |
| Tile Special 1 x 1 with Clip with Rounded Edges | 15712 | Lichtblauwgrijs | 1× |
| Tile Round 1 x 2 Half Circle | 1748 | Zwart | 3× |
| Brick Round 2 x 2, Pin Holes | 17485 | Zwart | 2× |
| Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 18575 | Zwart | 2× |
| Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 18653 | Zwart | 4× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Lichtblauwgrijs | 1× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 2 with Pin Hole Underneath | 18677 | Lichtblauwgrijs | 2× |
| Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] | 1927 | Rood | 4× |
| Tile Round 1 x 1 with Hollow Bar | 20482 | Lichtblauwgrijs | 3× |
| Bar 2L with Towball | 22484 | Donkerblauwgrijs | 1× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Lichtblauwgrijs | 2× |
| Brick 2 x 2 Corner | 2357 | Zwart | 2× |
| Panel 1 x 3 x 1 | 23950 | Rood | 2× |
| Plate 2 x 2 Corner | 2420 | Lichtblauwgrijs | 2× |
| Plate 2 x 2 Corner | 2420 | Zandkleur | 4× |
| Plate 2 x 2 Corner | 2420 | Rood | 6× |
| Plate 2 x 2 Corner | 2420 | Geel | 2× |
| Plate 2 x 2 Corner | 2420 | Wit | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Zwart | 2× |
| Slope Curved 2 x 1 Inverted | 24201 | Rood | 6× |
| Slope Curved 2 x 1 Inverted | 24201 | Wit | 2× |
| Propeller 3 Blade Small | 2421 | Zwart | 1× |
| Tile Round 1 x 1 Half Circle | 24246 | Lichtblauwgrijs | 6× |
| Wedge Plate 2 x 2 Left | 24299 | Rood | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Rood | 2× |
| Tile 1 x 4 with Groove | 2431 | Rood | 4× |
| Tile 1 x 4 with Groove | 2431 | Lichtblauwgrijs | 2× |
| Plate 2 x 12 | 2445 | Rood | 5× |
| Brick 1 x 16 | 2465 | Rood | 1× |
| Tile 2 x 3 | 26603 | Donkerblauwgrijs | 6× |
| Technic Disc 3 x 3 with Rim print | 2723pr0004 | Lichtblauwgrijs | 4× |
| Technic Brick 1 x 10 [9 Pin Holes] | 2730 | Lichtblauwgrijs | 1× |
| Technic Axle Towball | 2736 | Lichtblauwgrijs | 2× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Metallic zilver | 4× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Donkerblauwgrijs | 2× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Rood | 6× |
| Brick Special 1 x 2 with Grille | 2877 | Donkerblauwgrijs | 12× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Lichtblauwgrijs | 4× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Zwart | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Rood | 1× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Rood | 1× |
| Brick Special 1 x 1 with Handle | 2921 | Zwart | 4× |
| Brick 2 x 4 | 3001 | Rood | 3× |
| Brick 2 x 2 | 3003 | Rood | 5× |
| Handlebars | 30031 | Lichtblauwgrijs | 2× |
| Brick 1 x 2 | 3004 | Zwart | 6× |
| Brick 1 x 2 | 3004 | Lichtblauwgrijs | 6× |
| Brick 1 x 2 | 3004 | Rood | 13× |
| Brick 1 x 1 | 3005 | Zwart | 8× |
| Brick 1 x 1 | 3005 | Rood | 6× |
| Brick 2 x 10 | 3006 | Zwart | 2× |
| Brick 1 x 8 | 3008 | Zwart | 3× |
| Brick 1 x 6 | 3009 | Rood | 3× |
| Brick 1 x 4 | 3010 | Zwart | 3× |
| Plate 2 x 4 | 3020 | Rood | 14× |
| Plate 2 x 4 | 3020 | Geel | 2× |
| Plate 2 x 4 | 3020 | Zwart | 1× |
| Plate 2 x 3 | 3021 | Rood | 6× |
| Plate 2 x 3 | 3021 | Zwart | 5× |
| Plate 2 x 3 | 3021 | Lichtblauwgrijs | 4× |
| Plate 2 x 2 | 3022 | Wit | 1× |
| Plate 2 x 2 | 3022 | Donkerblauwgrijs | 3× |
| Plate 2 x 2 | 3022 | Lichtblauwgrijs | 2× |
| Plate 2 x 2 | 3022 | Rood | 14× |
| Plate 1 x 2 | 3023 | Zwart | 4× |
| Plate 1 x 2 | 3023 | Donkerblauwgrijs | 10× |
| Plate 1 x 2 | 3023 | Wit | 2× |
| Plate 1 x 2 | 3023 | Rood | 34× |
| Plate 1 x 2 | 3023 | Lichtblauwgrijs | 1× |
| Plate 1 x 1 | 3024 | Lichtblauwgrijs | 8× |
| Plate 1 x 1 | 3024 | Donkerblauwgrijs | 4× |
| Plate 1 x 1 | 3024 | Wit | 2× |
| Plate 1 x 1 | 3024 | Rood | 12× |
| Plate 4 x 6 | 3032 | Rood | 1× |
| Plate 2 x 8 | 3034 | Rood | 2× |
| Plate 2 x 8 | 3034 | Zwart | 1× |
| Plate Round Corner 3 x 3 | 30357 | Rood | 4× |
| Plate 6 x 8 | 3036 | Zwart | 1× |
| Plate 6 x 8 | 3036 | Rood | 1× |
| Slope 45° 2 x 4 | 3037 | Rood | 2× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Lichtblauwgrijs | 1× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Rood | 1× |
| Brick Special 1 x 4 with 4 Studs on One Side | 30414 | Zwart | 3× |
| Wedge 3 x 3 Cut Corner | 30505 | Zwart | 2× |
| Brick Round 1 x 1 Open Stud | 3062b | Geel | 3× |
| Tile 2 x 2 with Groove | 3068b | Donkerblauwgrijs | 1× |
| Tile 2 x 2 with Groove | 3068b | Rood | 2× |
| Tile 1 x 2 with Groove | 3069b | Zwart | 2× |
| Tile 1 x 2 with Groove | 3069b | Wit | 2× |
| Tile 1 x 2 with Groove | 3069b | Lichtblauwgrijs | 1× |
| Tile 1 x 2 with Groove | 3069b | Trans-doorzichtig | 1× |
| Tile 1 x 2 with Groove | 3069b | Rood | 7× |
| Tile 1 x 1 with Groove | 3070b | Rood | 2× |
| Tile 1 x 1 with Groove | 3070b | Zwart | 4× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Donkerblauwgrijs | 24× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Geel | 1× |
| Technic Pin 3/4 | 32002 | Zandkleur | 1× |
| Technic Link 1 x 6 without Stoppers | 32005a | Zwart | 2× |
| Technic Axle and Pin Connector Angled #1 | 32013 | Lichtblauwgrijs | 2× |
| Technic Beam 1 x 5 Thin | 32017 | Lichtblauwgrijs | 1× |
| Plate Special 1 x 2 with Door Rail | 32028 | Lichtblauwgrijs | 11× |
| Technic Axle 2 Notched | 32062 | Rood | 1× |
| Technic Steering Arm with 2 Pins | 32069 | Zwart | 2× |
| Technic Beam 2 x 4 L-Shape Thick | 32140 | Zwart | 2× |
| Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 32184 | Donkerblauwgrijs | 2× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Zwart | 1× |
| Technic Beam 1 x 4 Thin | 32449 | Lichtblauwgrijs | 2× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Donkerblauwgrijs | 3× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Zwart | 2× |
| Technic Brick 6 x 8 with 4 x 6 Opening | 32532 | Zwart | 2× |
| Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 32828 | Lichtblauwgrijs | 7× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Lichtblauwgrijs | 2× |
| Food Hot Dog / Sausage | 33078 | Lichtblauwgrijs | 2× |
| Plant, Banana | 33085 | Lichtblauwgrijs | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Rood | 4× |
| Tile Special 2 x 4 Inverted | 3395 | Zwart | 18× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Donkerrood | 6× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Wit | 10× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Zwart | 4× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Rood | 4× |
| Plate 1 x 8 | 3460 | Donkerblauwgrijs | 4× |
| Plate 1 x 8 | 3460 | Rood | 6× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Zwart | 4× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Zwart | 6× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 8× |
| Windscreen 4 x 12 x 3 | 3571 | Trans-doorzichtig | 2× |
| Brick Arch 1 x 5 x 2 | 3572 | Rood | 2× |
| Slope Curved 1 x 4 x 1 2/3 No Studs | 3573 | Wit | 2× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Wit | 4× |
| Brick 1 x 3 | 3622 | Rood | 6× |
| Brick 1 x 3 | 3622 | Wit | 4× |
| Brick 1 x 3 | 3622 | Zwart | 2× |
| Plate 1 x 3 | 3623 | Zwart | 7× |
| Plate 1 x 3 | 3623 | Rood | 12× |
| Plate 1 x 3 | 3623 | Lichtblauwgrijs | 1× |
| Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 3660 | Rood | 4× |
| Plate 1 x 6 | 3666 | Rood | 2× |
| Plate 1 x 6 | 3666 | Zwart | 3× |
| Plate 1 x 6 | 3666 | Wit | 2× |
| Plate 1 x 6 | 3666 | Lichtblauwgrijs | 2× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Lichtblauwgrijs | 2× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Geel | 4× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Rood | 2× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Zwart | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Rood | 2× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Zwart | 6× |
| Technic Axle 4 | 3705 | Rood | 1× |
| Technic Axle 6 | 3706 | Zwart | 1× |
| Plate 1 x 4 | 3710 | Wit | 2× |
| Plate 1 x 4 | 3710 | Lichtblauwgrijs | 5× |
| Plate 1 x 4 | 3710 | Zwart | 7× |
| Plate 1 x 4 | 3710 | Rood | 12× |
| Technic Bush | 3713 | Lichtblauwgrijs | 2× |
| Brick Curved 1 x 2 x 1 No Studs | 37352 | Rood | 38× |
| Technic Gear Rack 1 x 4 | 3743 | Lichtblauwgrijs | 1× |
| Slope Inverted 33° 3 x 2 [Connections between Studs] | 3747b | Rood | 4× |
| Technic Axle Pin without Friction Ridges Lengthwise | 3749 | Zandkleur | 2× |
| Equipment Candlestick | 37762 | Lichtblauwgrijs | 4× |
| Plate 2 x 6 | 3795 | Rood | 3× |
| Plate 2 x 10 | 3832 | Rood | 1× |
| Equipment Cup / Teacup Saucer with Recessed Stud on Top [PLAIN] | 38799 | Trans-doorzichtig | 4× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Zwart | 5× |
| Equipment Cup / Mug [Plain] | 3899 | Mat zilver | 1× |
| Hinge Brick 1 x 2 Base | 3937 | Rood | 6× |
| Hinge Brick 1 x 2 Top Plate Thin | 3938 | Lichtblauwgrijs | 6× |
| Technic Pin Long without Friction Ridges, with Anti-Roll Notch | 39888 | Zandkleur | 1× |
| Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 4032a | Donkerblauwgrijs | 1× |
| Brick Special 1 x 1 with Headlight | 4070 | Zwart | 4× |
| Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 4081b | Lichtblauwgrijs | 2× |
| Tile 1 x 8 with Groove | 4162 | Donkerrood | 5× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Lichtblauwgrijs | 2× |
| Bracket 2 x 2 with 1 x 2 Vertical Studs | 41682 | Rood | 6× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Rood | 1× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Zwart | 2× |
| Wedge Curved Inverted 6 x 2 Right | 41764 | Rood | 1× |
| Wedge Curved Inverted 6 x 2 Left | 41765 | Rood | 1× |
| Brick Curved 6 x 1 | 42022 | Rood | 2× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Donkerblauwgrijs | 1× |
| Wheel 11 x 8 with Center Groove | 42610 | Lichtblauwgrijs | 1× |
| Technic Pin 1/2 | 4274 | Wit | 3× |
| Slope Curved 8 x 2 No Studs | 42918 | Rood | 5× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Zwart | 31× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Rood | 4× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Wit | 2× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 5× |
| Technic Axle 7 | 44294 | Lichtblauwgrijs | 2× |
| Bracket 1 x 2 - 2 x 2 | 44728 | Rood | 2× |
| Plate 1 x 10 | 4477 | Rood | 4× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Donkerblauwgrijs | 4× |
| Brick Arch 1 x 3 | 4490 | Zwart | 1× |
| Plate Special 1 x 8 with Door Rail | 4510 | Zwart | 2× |
| Technic Axle 3 | 4519 | Lichtblauwgrijs | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Zwart | 2× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Lichtblauwgrijs | 2× |
| Panel 1 x 2 x 1 [Rounded Corners] | 4865b | Donkerrood | 1× |
| Wheel Arch, Mudguard 2 x 3 x 1 1/3 with 2 x 2 Plate | 49097 | Lichtblauwgrijs | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Rood | 8× |
| Wheel 30 x 14 | 56904 | Wit | 4× |
| Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye | 58176 | Trans-rood | 4× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Donkerblauwgrijs | 1× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Zwart | 2× |
| Brick Arch 1 x 3 x 2 Curved Top | 6005 | Rood | 4× |
| Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 60470b | Rood | 2× |
| Plate Round 4 x 4 with Pin Hole | 60474 | Lichtblauwgrijs | 1× |
| Plate 1 x 12 | 60479 | Rood | 2× |
| Plate 1 x 12 | 60479 | Lichtblauwgrijs | 1× |
| Plate 1 x 12 | 60479 | Donkerblauwgrijs | 1× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] | 60897 | Lichtblauwgrijs | 2× |
| Brick Curved 1 x 2 x 1 1/3 with Curved Top | 6091 | Rood | 4× |
| Brick 1 x 12 | 6112 | Rood | 1× |
| Technic Pin 1/2 with 2L Bar Extension | 61184 | Rood | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Zwart | 24× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Geel | 4× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Rood | 2× |
| Technic Universal Joint 3L [Complete Assembly] | 61903 | Lichtblauwgrijs | 1× |
| Plate Special 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center | 63082 | Lichtblauwgrijs | 1× |
| Tile 1 x 3 | 63864 | Zwart | 6× |
| Tile 1 x 3 | 63864 | Rood | 2× |
| Plate Special 1 x 2 with Clip Horizontal on End | 63868 | Donkerblauwgrijs | 2× |
| Bar 6L with Stop Ring | 63965 | Donkerblauwgrijs | 1× |
| Technic Axle Pin 3L without Friction Ridges and 2L Axle | 65249 | Lichtblauwgrijs | 6× |
| Technic Axle Pin 3L without Friction Ridges and 2L Axle | 65249 | Wit | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Zwart | 2× |
| Technic Axle and Pin Connector Perpendicular | 6536 | Lichtblauwgrijs | 2× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Rood | 4× |
| Technic Brick 1 x 1 with Pin Hole | 6541 | Lichtblauwgrijs | 4× |
| Wedge Plate 2 x 4 27° Right | 65426 | Wit | 1× |
| Wedge Plate 2 x 4 27° Right | 65426 | Lichtblauwgrijs | 1× |
| Wedge Plate 2 x 4 27° Left | 65429 | Wit | 1× |
| Wedge Plate 2 x 4 27° Left | 65429 | Lichtblauwgrijs | 1× |
| Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) | 65509 | Rood | 2× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Lichtblauwgrijs | 1× |
| Tile 1 x 6 with Groove | 6636 | Lichtblauwgrijs | 2× |
| Tile 1 x 6 with Groove | 6636 | Donkerrood | 2× |
| Tile 1 x 6 with Silver Stripe print | 6636pr0038 | Rood | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rood | 2× |
| Weapon Hilt Symmetric | 66909 | Lichtblauwgrijs | 4× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 67329 | Lichtblauwgrijs | 4× |
| Brick Curved 2 x 2 x 1 1/3 Curved Top, Corner | 67810 | Rood | 2× |
| Steering Wheel with 4 Studs on Center | 67811 | Zwart | 1× |
| Tile 2 x 6 | 69729 | Rood | 3× |
| Tile 2 x 6 with Silver Stripe print | 69729pr0026 | Rood | 4× |
| Technic Axle and Pin Connector Perpendicular Double Split [Reinforced] | 69819 | Lichtblauwgrijs | 2× |
| Tyre 49.5 x 14 | 70490 | Zwart | 4× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Rood | 2× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Zwart | 3× |
| Slope Curved 5 x 8 x 2/3 with No Studs on Top | 71771 | Rood | 1× |
| Slope Curved 5 x 8 x 2/3 with No Studs on Top with Silver Corvette print | 71771pr0001 | Rood | 1× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Lichtblauwgrijs | 4× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Lichtblauwgrijs | 4× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Zwart | 4× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Rood | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Zwart | 2× |
| Slope Curved 10 x 2 x 2 with Curved End Left | 77180 | Rood | 1× |
| Slope Curved 10 x 2 x 2 with Curved End Right | 77182 | Rood | 1× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Donkerblauwgrijs | 1× |
| Plate 3 x 3 Corner | 77844 | Zwart | 2× |
| Bar 2L with Stop in Center | 78258 | Donkerblauwgrijs | 1× |
| Plate 1 x 5 | 78329 | Wit | 2× |
| Plate 1 x 5 | 78329 | Rood | 8× |
| Hose, Ribbed 7mm D. 9L / 7.2cm | 78c09 | Zwart | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Zwart | 2× |
| Tile 3 x 3 Curved, Macaroni | 79393 | Lichtblauwgrijs | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Rood | 4× |
| Plate Round Corner 5 x 5 with 4 x 4 Round Cutout | 80015 | Lichtblauwgrijs | 2× |
| Slope Curved 3 x 2 with Stud Notch Left | 80177 | Rood | 1× |
| Slope Curved 3 x 2 with Stud Notch Right | 80178 | Rood | 1× |
| Brick Arch 1 x 4 x 3 | 80543 | Rood | 6× |
| Plate Round 1 x 1 with Open Stud | 85861 | Lichtblauwgrijs | 10× |
| Plate Round 1 x 1 with Open Stud | 85861 | Rood | 1× |
| Plate Round 1 x 1 with Open Stud | 85861 | Zwart | 7× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Rood | 33× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Lichtblauwgrijs | 6× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Rood | 6× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Zwart | 2× |
| Tile 2 x 4 with Groove | 87079 | Rood | 6× |
| Tile 2 x 4 with Groove | 87079 | Lichtblauwgrijs | 3× |
| Tile 2 x 4 with Groove | 87079 | Donkerblauwgrijs | 1× |
| Tile 2 x 4 with Groove | 87079 | Zwart | 2× |
| Tile 2 x 4 with Silver Stripe print | 87079pr0313 | Rood | 2× |
| Plate Special 2 x 2 with Groove and Center Stud (Jumper) | 87580 | Rood | 2× |
| Plate Special 2 x 6 x 2/3 with 4 Studs on Side, 1 Support Wall on Bottom | 87609 | Rood | 1× |
| Bar 3L | 87994 | Lichtblauwgrijs | 1× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Rood | 2× |
| Plate 2 x 14 | 91988 | Zandkleur | 1× |
| Technic Axle and Pin Connector Perpendicular Split | 92907 | Zwart | 1× |
| Brick Arch 1 x 6 Raised Arch | 92950 | Lichtblauwgrijs | 2× |
| Brick Arch 1 x 6 Raised Arch with Silver Stripe print | 92950pr0001 | Rood | 2× |
| Arm Skeleton Bent with Clips at 90° [Vertical Grip] | 93061 | Zwart | 3× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Zwart | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Rood | 2× |
| Weapon Sword / Foil / Épée | 93550 | Mat zilver | 1× |
| Slope Curved 4 x 2 No Studs | 93606 | Rood | 2× |
| Brick and Axle Separator v2.0 | 96874 | Oranje | 1× |
| Tile Round 1 x 1 | 98138 | Geel | 4× |
| Tile Round 1 x 1 | 98138 | Trans-doorzichtig | 2× |
| Tile Round 1 x 1 | 98138 | Lichtblauwgrijs | 4× |
| Tile Round 1 x 1 | 98138 | Zwart | 3× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Rood | 2× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Wit | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Zwart | 1× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Zwart | 1× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Zwart | 4× |
Bouw-DNA
Onderdeleninzichten voor Corvette
Met 1.210 onderdelen zit deze build -43% ten opzichte van de gemiddelde Icons set en +110% ten opzichte van de gemiddelde release uit 2023.
T.o.v. gemiddelde Icons set
Gemiddelde Icons set: 2.105 onderdelen over 80 andere sets.
T.o.v. gemiddelde set uit 2023
Gemiddelde set uit 2023: 575 onderdelen over 506 andere sets.
Kleurprofiel
Dominante kleur
Rood
Unieke onderdelen
5.1 onderdelen per uniek type
Herhalingsfactor
Gemiddeld aantal onderdelen per uniek type.
Meest gebruikte onderdeel
Plate 1 x 2
51xResultaten zijn gebaseerd op officiële LEGO onderdelen inventarissen. Nauwkeurigheid verbetert naarmate je set compleetheid bevestigt.
Deze site is niet gelieerd aan of goedgekeurd door de LEGO Groep.








![Slope Curved 2 x 1 No Studs [1/2 Bow]](https://cdn.rebrickable.com/media/parts/elements/6047276.jpg)
