


Baan je een weg door de rijken met de LEGO Ninjago Land Bounty 71869-1! Dit imposante 2026-model verandert van een robuust landvoertuig in een uitgebreide, meerlaagse vesting, klaar voor elke strijd. Stel je voor hoe Kai, Lloyd en de andere ninja's bliksemsnelle aanvallen uitvoeren vanuit verborgen compartimenten, de verlichte cockpit verdedigen of tactieken bespreken in het gedetailleerde commandocentrum. De Land Bounty is uitgerust met afschietbare wapens, waaronder veermechanisme-schieters en een afneembare flyer voor luchtaanvallen, zodat de helden op alles voorbereid zijn. Het ruime interieur biedt een trainingsdojo, wapenopslag en leefruimtes, voor eindeloze speelmogelijkheden voor jonge Spinjitzu-meesters. Bereid je voor op epische avonturen en stal dit magnifieke rijdende hoofdkwartier tentoon.
Onderdelen inventaris
| Onderdeel | Kleur | Aantal |
|---|---|---|
![]() Plate 2 x 2 Corner 2420 | Zwart | 2× |
![]() Tile 1 x 4 with Groove 2431 | Zwart | 3× |
![]() Technic Brick 1 x 10 [9 Pin Holes] 2730 | Zwart | 2× |
![]() Brick 2 x 3 3002 | Zwart | 2× |
![]() Plate 2 x 4 3020 | Zwart | 5× |
![]() Slope 45? 2 x 2 3039 | Zwart | 1× |
![]() FLAT TILE 1X2 3069 | Zwart | 4× |
![]() Plate 1 x 6 3666 | Zwart | 5× |
![]() Technic Brick 1 x 4 [3 Pin Holes] 3701 | Zwart | 3× |
![]() Technic Brick 1 x 8 [7 Pin Holes] 3702 | Zwart | 2× |
10 van 355 onderdelen getoond
🔓 Meld je aan om alle onderdelen te zien| Slope 45? 2 x 2 | 3039 | Zwart | 1× |
| FLAT TILE 1X2 | 3069 | Zwart | 4× |
| Plate 1 x 6 | 3666 | Zwart | 5× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Zwart | 3× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Zwart | 2× |
| Technic Brick 1 x 16 [15 Pin Holes] | 3703 | Zwart | 2× |
| Plate 6 x 6 | 3958 | Zwart | 1× |
| Plate 1 x 10 | 4477 | Zwart | 2× |
| Tile 1 x 6 with Groove | 6636 | Zwart | 5× |
| Handlebars | 30031 | Zwart | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Zwart | 12× |
| ROOF TILE 1X2/45° | 3040 | Zwart | 6× |
| Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 32530 | Zwart | 3× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Zwart | 2× |
| Plate 4 x 4 | 3031 | Zwart | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 3× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Zwart | 2× |
| Tile 1 x 3 | 63864 | Zwart | 2× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Zwart | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Zwart | 3× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Zwart | 1× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 2× |
| Steering Wheel Small, 2 x 2 [Reinforced] | 16091 | Zwart | 1× |
| Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | 10247 | Zwart | 4× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Zwart | 8× |
| SHAFT 3M Ø3.2 | 17715 | Zwart | 4× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Zwart | 6× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Zwart | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Zwart | 5× |
| STICK 6M W/FLANGE | 28921 | Zwart | 1× |
| Wheel Arch, Mudguard 3 x 4 with 2 x 2 Plate | 28326 | Zwart | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 17× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Zwart | 2× |
| Technic Brick 4 x 4 with 2 x 2 Opening | 32324 | Zwart | 2× |
| HANDLE | 29176 | Zwart | 1× |
| Slope Inverted 45° 4 x 1 Double with 1 x 2 Recessed | 32802 | Zwart | 2× |
| BOOK, NO. 2 | 29167 | Zwart | 1× |
| HOLDER Ø3.2 W/TUBE Ø3.2 HOLE | 44873 | Zwart | 1× |
| HOLE Ø4.8 VERT. W/ 4 HOLDER | 49756 | Zwart | 2× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Zwart | 1× |
| Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 68568 | Zwart | 2× |
| Wedge Plate 6 x 2 Left | 78443 | Zwart | 1× |
| Wedge Plate 6 x 2 Right | 78444 | Zwart | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Zwart | 2× |
| Wedge 3 x 3 Facet | 2462 | Zwart | 2× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Zwart | 4× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Zwart | 1× |
| ROOF TILE 3X4/25 DEG. | 3016 | Zwart | 1× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Zwart | 2× |
| 6X8 BRICK, DIA. 4,85 | 1680 | Zwart | 1× |
| Bracket 5 x 1 x 1 1/3 | 5712 | Zwart | 1× |
| Plate Special 2 x 2 with Horizontal T-Bar Underneath | 5066 | Zwart | 2× |
| Bracket 5 x 2 x 1 1/3 with Bottom Stud Holder | 79180 | Zwart | 2× |
| Wedge Tile 2 x 2 Left | 7828 | Donkerblauw | 1× |
| Wedge Tile 2 x 2 Right | 7829 | Donkerblauw | 1× |
| Technic Beam 1 x 5 Thick | 32316 | Zwart | 2× |
| Technic Beam 1 x 3 Thick | 32523 | Zwart | 2× |
| Technic Gear 12 Tooth Double Bevel | 32270 | Zwart | 1× |
| TECHNIC 11M BEAM | 64290 | Zwart | 3× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Zwart | 2× |
| TECHNIC 6M HALF BEAM | 28570 | Zwart | 2× |
| TECHNIC LEVER 3X3M, 90° | 59605 | Zwart | 2× |
| CROSS BLOCK 3M | 42796 | Zwart | 2× |
| TECHNIC ANGULAR BEAM 3X7 | 42160 | Zwart | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Zwart | 77× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Zwart | 11× |
| TECHNIC ANGULAR WHEEL | 49135 | Zwart | 2× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Zwart | 7× |
| Technic Beam 2 x 3 L-Shape with Quarter Ellipse Thick | 71708 | Zwart | 4× |
| LEVER 1X4, WITHOUT NOTCH | 63782 | Zwart | 4× |
| BUSH FOR CROSS AXLE | 42798 | Zwart | 1× |
| Technic Steering Wheel Hub Holder with 2 Pin Holes and 2 Axle Holes, No Slots | 65766 | Zwart | 2× |
| Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 44874 | Zwart | 7× |
| Tyre 68.7 x 34 R | 61480 | Zwart | 6× |
| Technic Beam 3 x 5 Thick [90° Offset Centre Beam Holes] | 14720 | Zwart | 1× |
| Technic Beam 1 x 7 Thick with Alternating Holes | 2391 | Zwart | 1× |
| Technic Beam 1 x 9 Thick with Alternating Holes | 6612 | Zwart | 3× |
| Technic Beam 2 x 3 Thick [90° Offset Centre Beam Hole] | 3167 | Zwart | 2× |
| FLAT TILE 1X2 | 3069 | Zandkleur | 1× |
| Plate 2 x 3 | 3021 | Zandkleur | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zandkleur | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zandkleur | 3× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Zandkleur | 1× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Zandkleur | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Zandkleur | 2× |
| Plate Special 1 x 1 with Handle on 2 Ends | 78257 | Zandkleur | 1× |
| CONNECTOR PEG/CROSS AXLE | 6562 | Zandkleur | 6× |
| Technic Axle 4 with Centre Stop | 99008 | Zandkleur | 2× |
| Technic Pin 3/4 | 32002 | Zandkleur | 4× |
| Technic Axle Pin with Friction Ridges Lengthwise | 43093 | Zwart | 18× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Zwart | 31× |
| Hipwear Dragon Tail | 7759 | Zwart | 1× |
| MINI HAT, NO. 252 | 115499 | Helder groen | 1× |
| ELEMENT SEPARATOR | 31510 | Oranje | 1× |
| Food Cupcake with Stud | 79743 | Oranje | 1× |
| Radiator Grille 1x2 | 2412 | Rood | 2× |
| Brick 1 x 2 | 3004 | Rood | 3× |
| Plate 2 x 4 | 3020 | Rood | 2× |
| Plate 1 x 2 | 3023 | Rood | 8× |
| Plate 4 x 6 | 3032 | Rood | 1× |
| FLAT TILE 1X2 | 3069 | Rood | 6× |
| FLAT TILE 1X1 | 3070 | Rood | 2× |
| Plate 1 x 8 | 3460 | Rood | 2× |
| Brick 1 x 3 | 3622 | Rood | 2× |
| Plate 1 x 3 | 3623 | Rood | 6× |
| Slope Inverted 45° 2 x 1 | 3665 | Rood | 2× |
| Plate 1 x 6 | 3666 | Rood | 7× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Rood | 2× |
| Plate 1 x 4 | 3710 | Rood | 2× |
| ROOF TILE 1X3/25° INV. | 4287 | Rood | 2× |
| Plate 1 x 10 | 4477 | Rood | 2× |
| Tile 1 x 6 with Groove | 6636 | Rood | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Rood | 8× |
| Cone 1 x 1 [Top Groove] | 59900 | Rood | 8× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Rood | 8× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Rood | 1× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Rood | 1× |
| Brick Curved 10 x 1 [Symmetric Inside Ridges] | 13731 | Rood | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Rood | 2× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Rood | 2× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Rood | 1× |
| Slope Curved 8 x 2 No Studs | 42918 | Rood | 2× |
| Plate 1x1 with Up Right Holder | 44842 | Rood | 4× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Rood | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Rood | 6× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Rood | 1× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Rood | 2× |
| Plate Special 1 x 2 with Pin Hole On Side | 3172 | Rood | 2× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Rood | 2× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Rood | 2× |
| Slope Curved 1 x 4 with Stud Notch Left | 5415 | Rood | 1× |
| Slope Curved 1 x 4 with Stud Notch Right | 5414 | Rood | 1× |
| ATTIC 1X2/45° | 3049 | Rood | 2× |
| Technic Beam 1 x 5 Thick | 32316 | Rood | 1× |
| Technic Axle 2 Notched | 32062 | Rood | 12× |
| Technic Beam 3 x 5 L-Shape Thick | 32526 | Rood | 2× |
| TECHNIC 9M BEAM | 64289 | Rood | 1× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Rood | 2× |
| Technic Panel Fairing #6 Long Smooth, Side B | 64393 | Rood | 1× |
| Technic Panel Fairing #5 Long Smooth, Side A | 64681 | Rood | 1× |
| Technic Axle 6 | 3706 | Rood | 2× |
| Technic Beam 3 x 3 T-Shape Thick | 60484 | Rood | 2× |
| BUSH FOR CROSS AXLE | 42798 | Rood | 1× |
| CROSS BLOCK 3M | 42796 | Rood | 4× |
| ANGLE ELEMENT, 180 DEGREES [2] | 42134 | Rood | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rood | 2× |
| Technic Panel Curved 5 x 7 Parallelogram Left | 80267 | Rood | 1× |
| Technic Panel Curved 5 x 7 Parallelogram Right | 80268 | Rood | 1× |
| TECHNIC LEVER 2M | 44862 | Rood | 2× |
| BEAM 1X2 W/CROSS AND HOLE | 40147 | Rood | 3× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Rood | 3× |
| MINI HEAD, NO. 3980 | 102841 | Geel | 1× |
| MINI HEAD, NO. 2801 | 49569 | Geel | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Limoen | 1× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Limoen | 1× |
| Creature Body Part, Dragon, Wing | 5984 | Limoen | 2× |
| Minifig Neckwear Bandana (Ninjago) | 15619 | Zwart | 1× |
| FROG | 28841 | Metallic zilver | 1× |
| Technic Brick 1 x 6 [5 Pin Holes] | 3894 | Donkerblauwgrijs | 2× |
| Plate 1 x 4 | 3710 | Donkerblauwgrijs | 7× |
| Plate 2 x 6 | 3795 | Donkerblauwgrijs | 7× |
| Brick 1 x 2 | 3004 | Donkerblauwgrijs | 2× |
| Brick 1 x 1 | 3005 | Donkerblauwgrijs | 4× |
| Fence Lattice 1 x 4 x 1 | 3633 | Donkerblauwgrijs | 2× |
| RIDGED TILE 1X2/45° | 3044 | Donkerblauwgrijs | 1× |
| Wedge Plate 2 x 4 | 51739 | Donkerblauwgrijs | 1× |
| Tile 1 x 3 | 63864 | Donkerblauwgrijs | 4× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Donkerblauwgrijs | 7× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Donkerblauwgrijs | 6× |
| Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 32952 | Donkerblauwgrijs | 2× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Donkerblauwgrijs | 2× |
| FLAT TILE 1X2, NO. 276 | 66894 | Donkerblauwgrijs | 1× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Donkerblauwgrijs | 4× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Donkerblauwgrijs | 5× |
| Launcher Trigger, Weapon Gun Trigger | 69755 | Donkerblauwgrijs | 2× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Donkerblauwgrijs | 4× |
| Wedge Plate 6 x 2 Left | 78443 | Donkerblauwgrijs | 2× |
| Wedge Plate 6 x 2 Right | 78444 | Donkerblauwgrijs | 2× |
| ANG.BRICK 5X5, Ø4,85 | 28973 | Donkerblauwgrijs | 2× |
| Plate 2x2 w. stump/top | 53968 | Donkerblauwgrijs | 1× |
| Technic Axle 8 with Stop | 55013 | Donkerblauwgrijs | 1× |
| Technic Steering Hub for Portal Axle | 92909 | Donkerblauwgrijs | 6× |
| TECHNIC 9M BEAM | 64289 | Donkerblauwgrijs | 2× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 11214 | Donkerblauwgrijs | 10× |
| Technic Axle 4 with Stop | 87083 | Donkerblauwgrijs | 4× |
| Technic Pin Connector Hub with 2 Axles | 27940 | Donkerblauwgrijs | 2× |
| TECHNIC ANG. BEAM 4X2 90 DEG | 42137 | Donkerblauwgrijs | 4× |
| CROSS BLOCK 3M | 42796 | Donkerblauwgrijs | 2× |
| DOUBLE CROSS BLOCK | 42142 | Donkerblauwgrijs | 7× |
| Technic Pin with Friction, Bar 2L and Towball | 80477 | Donkerblauwgrijs | 2× |
| Technic Pin 1/2 with Friction | 89678 | Donkerblauwgrijs | 9× |
| Minifig Neckwear Bandana (Ninjago) | 15619 | Helder groen | 1× |
| Radiator Grille 1x2 | 2412 | Lichtblauwgrijs | 1× |
| Plate 2 x 2 Corner | 2420 | Lichtblauwgrijs | 4× |
| Tile Special 1 x 2 with Handle | 2432 | Lichtblauwgrijs | 1× |
| Brick Special 1 x 2 with Grille | 2877 | Lichtblauwgrijs | 2× |
| Brick 2 x 4 | 3001 | Lichtblauwgrijs | 2× |
| Brick 2 x 2 | 3003 | Lichtblauwgrijs | 2× |
| Plate 1 x 6 | 3666 | Lichtblauwgrijs | 1× |
| Technic Brick 1 x 2 [1 Pin Hole] | 3700 | Lichtblauwgrijs | 7× |
| PLATE 2X2 ROUND | 4032 | Lichtblauwgrijs | 2× |
| Slope Inverted 45° 4 x 2 Double | 4871 | Lichtblauwgrijs | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Lichtblauwgrijs | 4× |
| Tile 1 x 6 with Groove | 6636 | Lichtblauwgrijs | 1× |
| Plate Special 1 x 2 with Door Rail | 32028 | Lichtblauwgrijs | 2× |
| Bar 1 x 3 [Clip / Anti-Stud] | 4735 | Lichtblauwgrijs | 2× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Lichtblauwgrijs | 2× |
| CONSOLE W. WHEEL GREY/BLACK | 73081 | Lichtblauwgrijs | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Lichtblauwgrijs | 3× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Lichtblauwgrijs | 10× |
| Bucket 1 x 1 x 1 | 95343 | Lichtblauwgrijs | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Lichtblauwgrijs | 5× |
| FLAT TILE, 1X1, NO. 160 | 24641 | Lichtblauwgrijs | 1× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Lichtblauwgrijs | 1× |
| FLAT TILE 1X1, 1/2 CIRCLE | 35399 | Lichtblauwgrijs | 1× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Lichtblauwgrijs | 4× |
| PLATE 1X2 W. VERTICAL SCHAFT | 43876 | Lichtblauwgrijs | 1× |
| PLATE 1X4 SPLIT-LEVEL | 42505 | Lichtblauwgrijs | 1× |
| Plate 1x1 with Up Right Holder | 44842 | Lichtblauwgrijs | 2× |
| Tile 2 x 6 | 69729 | Lichtblauwgrijs | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Lichtblauwgrijs | 7× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Lichtblauwgrijs | 6× |
| Technic Pin without Friction Ridges Lengthwise | 3673 | Lichtblauwgrijs | 6× |
| Technic Axle 3 | 4519 | Lichtblauwgrijs | 5× |
| Technic Beam 1 x 7 Thick | 32524 | Lichtblauwgrijs | 3× |
| Technic Ball Joint | 32474 | Lichtblauwgrijs | 2× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Lichtblauwgrijs | 3× |
| WHEEL BEARING BACK | 28833 | Lichtblauwgrijs | 4× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Lichtblauwgrijs | 7× |
| CROSS BLOCK 90° | 40146 | Lichtblauwgrijs | 9× |
| Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes] | 65487 | Lichtblauwgrijs | 6× |
| LEVER 5M | 44864 | Lichtblauwgrijs | 2× |
| CROSS BLOCK 3X2 | 42191 | Lichtblauwgrijs | 3× |
| Technic Pin Long 3l, No Friction Ridges, with Stop and Hole | 77765 | Lichtblauwgrijs | 3× |
| ANGLE ELEMENT, 180 DEGREES [2] | 42134 | Lichtblauwgrijs | 2× |
| Technic Beam 1 x 11 Thick with Alternating Holes | 73507 | Lichtblauwgrijs | 1× |
| Hinge 1 x 3 Triangle with Two Pins, 1 Locking Finger, Squared Pin Holes | 57359 | Lichtblauwgrijs | 1× |
| Technic Knob Wheel 45° Offset | 5405 | Lichtblauwgrijs | 2× |
| Technic Pin Connector Hub with 3L Axle | 5713 | Lichtblauwgrijs | 1× |
| Technic Beam 1 x 7 Thick with Alternating Holes | 2391 | Lichtblauwgrijs | 4× |
| ENGINE 1X2 HALF BEAM, W/ CROSS AXLE | 8232 | Lichtblauwgrijs | 2× |
| MINI WIG, W/ ACCESSORY, NO. 22 | 76917 | Zwart | 1× |
| MINI WIG, W/ ACCESSORY, NO. 12 | 69558 | Zwart | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Zwart | 1× |
| Wedge Plate 4 x 2 Left | 41770 | Zwart | 1× |
| Brick 1 x 2 | 3004 | Zwart | 2× |
| Plate 1 x 2 | 3023 | Zwart | 10× |
| Plate 1 x 3 | 3623 | Zwart | 4× |
| ROUND BRICK 1X1 | 3062 | Roodbruin | 2× |
| Plate 2 x 4 | 3020 | Zwart | 5× |
| Plate 2 x 3 | 3021 | Zwart | 2× |
| Brick 1 x 3 | 3622 | Zwart | 2× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Zwart | 7× |
| Plate 1 x 8 | 3460 | Zwart | 2× |
| Plate 1 x 6 | 3666 | Zwart | 4× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Zwart | 9× |
| FLAT TILE 2X2 | 3068 | Roodbruin | 4× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 2× |
| Container Box 2 x 2 x 2 - Top Opening | 61780 | Zwart | 1× |
| Slope 45° 2 x 2 Double Convex | 3045 | Zwart | 2× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Zwart | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Zwart | 2× |
| Plate Special 1 x 2 with Handle on End [Closed Ends] | 60478 | Zwart | 1× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Zwart | 3× |
| Tile 2 x 2 Corner | 14719 | Zwart | 2× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Zwart | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Zwart | 2× |
| Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) | 65509 | Zwart | 2× |
| PLATE 1X2 W. 1 HORIZONTAL SNAP | 65458 | Roodbruin | 1× |
| BRICK 1X1 W/HOLDER, H0RIZONTAL | 65460 | Roodbruin | 4× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Zwart | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Zwart | 1× |
| Wedge Plate 2 x 2 Left | 24299 | Zwart | 1× |
| SHAFT 3M Ø3.2 | 17715 | Roodbruin | 2× |
| Plate Round Half 3 x 6 with 1 x 2 Cutout | 18646 | Zwart | 1× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Zwart | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Zwart | 2× |
| Slope Curved 1 x 6 | 6801 | Zwart | 1× |
| Technic Beam 1 x 3 Thick | 32523 | Zwart | 6× |
| Technic Axle 5 with Stop | 15462 | Roodbruin | 9× |
| Technic Beam 1 x 7 Thick | 32524 | Zwart | 2× |
| Plate 6 x 8 | 3036 | Donker zandkleur | 2× |
| Plate 2 x 4 | 3020 | Donker zandkleur | 2× |
| FLAT TILE 1X2 | 3069 | Donker zandkleur | 2× |
| Plate 1 x 1 | 3024 | Donker zandkleur | 4× |
| Plate 2 x 3 | 3021 | Donker zandkleur | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Donker zandkleur | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Donker zandkleur | 1× |
| Plate 4 x 6 | 3032 | Donker zandkleur | 2× |
| Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 34103 | Donker zandkleur | 4× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Donker zandkleur | 3× |
| Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | 61409 | Zwart | 2× |
| MINI HEAD, NO. 2500 | 37203 | Silver Metallic | 1× |
| Hair Flat Top, Short with Straight Even Side Sections | 25379 | Roodbruin | 1× |
| Fric. element, cylinder | 65443 | Silver Metallic | 3× |
| Bar 1L with Top Stud and Two Side Studs | 92690 | Pearl Titanium | 1× |
| Launcher, Plate Special 1 x 2 with Mini Blaster Square | 69754 | Pearl Titanium | 2× |
| PLATE W. BOW 1X2X2/3 | 3593 | Trans-Brown | 2× |
| Minifig Head [Plain] [Vented Stud - 2 Holes] | 28621 | Zwart | 1× |
| CREATURE HEAD, NO. 285 | 114445 | Zwart | 1× |
| Dome 1 x 1 x 2/3 | 6908 | Zwart | 4× |
| Brick 1x1 w/ Studs on 2 Sides | 35382 | Transparent Bright Orange | 1× |
| Wave / Flame Small with Pin | 37775 | Zwart | 1× |
| FLAT TILE 1X1, ROUND | 35380 | Transparent Green | 2× |
| PLATE 1X2 | 28653 | Trans-neongroen | 12× |
| FLAT TILE 1X1, ROUND | 35380 | Trans-lichtblauw | 11× |
| FLAT TILE 1X1, ROUND | 35380 | Zwart | 11× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Geel | 35× |
| Cone 1 x 1 [Top Groove] | 59900 | Geel | 7× |
| Fence Lattice 1 x 4 x 1 | 3633 | Parel goud | 3× |
| Weapon Lightsaber Hilt with Bottom Ring | 64567 | Helder licht oranje | 2× |
| Weapon Throwing Star / Shuriken with Textured Grips [Complete Sprue of 2] | 19807 | Parel goud | 1× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Limoen | 7× |
| LIGHT SWORD - BLADE | 21462 | Medium Lime | 3× |
| STICK 6M W/FLANGE | 28921 | Medium Lime | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Geel | 4× |
| Weapon Sword Hilt with Dragon Head | 36017 | Parel goud | 3× |
| HOLDER Ø3.2 W/TUBE Ø3.2 HOLE | 44873 | Medium Lime | 2× |
| Plate 1x1 with Up Right Holder | 44842 | Medium Lime | 2× |
| Weapon Sword, Big Blade with Bar | 98137 | Parel goud | 2× |
| Weapon Sai | 98139 | Parel goud | 6× |
| FLAT TILE 1X1, ROUND 'NO. 51' | 25619 | Medium Lime | 1× |
| Fin Jagged with Axle Hole | 76919 | Parel goud | 4× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Medium Lime | 1× |
| Plate 2 x 2 | 3022 | Geel | 5× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Parel goud | 1× |
| FLAT TILE 1X1, ROUND, NO. 185 | 83519 | Medium Lime | 1× |
| PLATE W. BOWS 2X1½ | 81300 | Medium Lime | 3× |
| Wedge Plate 2 x 2 Left | 24299 | Geel | 1× |
| Wedge Plate 2 x 2 Right | 24307 | Geel | 1× |
| Plate Round 1 x 2 Half Circle with Stud (Jumper) | 1745 | Geel | 1× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Parel goud | 4× |
| Brick Special 1 x 2 Rounded with Center Bars | 77808 | Geel | 4× |
| Chain 2L with Bars | 6981 | Parel goud | 1× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Parel goud | 2× |
| Neckwear, Shoulder Guard, Pointy with Studs on Back | 7549 | Parel goud | 1× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Geel | 4× |
| Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 48267 | Geel | 2× |
| RIM WIDE 43,2X26 W 6 HOL.Ø 4.8 | 51488 | Medium Lime | 6× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Limoen | 9× |
| Plate 1 x 2 | 3023 | Wit | 5× |
| BRICK 1X2 WITH CROSS HOLE | 31493 | Wit | 2× |
| FLAG 3X8, W/ 3.2 SHAFT | 72154 | Wit | 1× |
| FLAT TILE 1X2, NO. 376 | 103172 | Wit | 1× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Wit | 4× |
| Minifig Neckwear Bandana (Ninjago) | 15619 | Wit | 1× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Wit | 2× |
| Technic Beam 1 x 2 Thick | 43857 | Wit | 2× |
| TECHNIC LEVER 3M | 65123 | Wit | 2× |
| Technic Pin 1/2 | 4274 | Wit | 12× |
Bouw-DNA
Onderdeleninzichten voor Land Bounty
Met 1.215 onderdelen zit deze build +166% ten opzichte van de gemiddelde Ninjago set en +94% ten opzichte van de gemiddelde release uit 2026.
T.o.v. gemiddelde Ninjago set
Gemiddelde Ninjago set: 457 onderdelen over 408 andere sets.
T.o.v. gemiddelde set uit 2026
Gemiddelde set uit 2026: 626 onderdelen over 427 andere sets.
Kleurprofiel
Dominante kleur
Zwart
Unieke onderdelen
4.3 onderdelen per uniek type
Herhalingsfactor
Gemiddeld aantal onderdelen per uniek type.
Meest gebruikte onderdeel
Technic Pin with Friction Ridges Lengthwise with No Center Slots
77xResultaten zijn gebaseerd op officiële LEGO onderdelen inventarissen. Nauwkeurigheid verbetert naarmate je set compleetheid bevestigt.
Deze site is niet gelieerd aan of goedgekeurd door de LEGO Groep.


![Technic Brick 1 x 10 [9 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/273026.jpg)





![Technic Brick 1 x 4 [3 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370126.jpg)
![Technic Brick 1 x 8 [7 Pin Holes]](https://cdn.rebrickable.com/media/parts/elements/370226.jpg)