


LEGO NINJAGO 71872-1 Ultra Dragon Battle brengt de eindstrijd uit de NINJAGO Legends-verhaallijn De nacht valt tot leven. Het displaymodel zet een vierkoppige draak tegenover de gemene Verslinder-slang die uit de grond omhoogkomt. Na het bouwen kan de draak van de basis worden gehaald voor actiescenes, terwijl beide figuren beweegbare details hebben zoals koppen, nekken, kaken, staart en vleugels. Met Jin, Mira, Nate en een Oni-generaal krijgt de scene herkenbare hoofdpersonen, waardoor de set zowel als dramatisch NINJAGO-displaymodel werkt als een grote speelset voor fans die meer willen dan een statische draak.
Onderdelen inventaris
| Onderdeel | Kleur | Aantal |
|---|---|---|
![]() Plate 2 x 2 Corner 2420 | Zwart | 2× |
![]() Tile 1 x 4 with Groove 2431 | Zwart | 4× |
![]() Brick 2 x 4 3001 | Zwart | 2× |
![]() Brick 2 x 3 3002 | Zwart | 1× |
![]() Brick 2 x 2 3003 | Zwart | 1× |
![]() Brick 1 x 2 3004 | Zwart | 1× |
![]() Brick 1 x 1 3005 | Zwart | 2× |
![]() Brick 1 x 4 3010 | Zwart | 2× |
![]() Plate 2 x 4 3020 | Zwart | 6× |
![]() Plate 2 x 8 3034 | Zwart | 1× |
10 van 558 onderdelen getoond
🔓 Meld je aan om alle onderdelen te zien| Brick 1 x 2 | 3004 | Zwart | 1× |
| Brick 1 x 1 | 3005 | Zwart | 2× |
| Brick 1 x 4 | 3010 | Zwart | 2× |
| Plate 2 x 4 | 3020 | Zwart | 6× |
| Plate 2 x 8 | 3034 | Zwart | 1× |
| Plate 4 x 8 | 3035 | Zwart | 1× |
| FLAT TILE 2X2 | 3068 | Zwart | 2× |
| Plate Special 3 x 2 with Rounded End, Hole | 3176 | Zwart | 1× |
| Brick 1 x 3 | 3622 | Zwart | 4× |
| Plate 1 x 3 | 3623 | Zwart | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Zwart | 2× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Zwart | 2× |
| Plate 1 x 4 | 3710 | Zwart | 2× |
| PLATE 2X2 ROUND | 4032 | Zwart | 1× |
| Plate 1 x 10 | 4477 | Zwart | 4× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Zwart | 1× |
| Wedge Plate 4 x 2 Right | 41769 | Zwart | 2× |
| Wedge Plate 4 x 2 Left | 41770 | Zwart | 2× |
| Wedge Plate 3 x 2 Right | 43722 | Zwart | 2× |
| Wedge Plate 3 x 2 Left | 43723 | Zwart | 2× |
| Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 47455 | Zwart | 4× |
| Plate Round Corner 3 x 3 | 30357 | Zwart | 2× |
| Slope Curved 3 x 1 No Studs | 50950 | Zwart | 4× |
| Wedge Plate 8 x 3, 22° Right | 50304 | Zwart | 1× |
| Wedge Plate 8 x 3, 22° Left | 50305 | Zwart | 1× |
| Plate Special 1 x 1 with Tooth | 49668 | Zwart | 2× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 4× |
| Slope 18° 4 x 1 | 60477 | Zwart | 4× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zwart | 1× |
| Tile 2 x 4 with Groove | 87079 | Zwart | 2× |
| Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 88930 | Zwart | 2× |
| Plate Special 1 x 2 with Angled Handles on Side | 92692 | Zwart | 2× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Zwart | 1× |
| Slope Curved 4 x 2 No Studs | 93606 | Zwart | 1× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Zwart | 33× |
| Wedge Curved 4 x 3 No Studs [Plain] | 64225 | Zwart | 1× |
| Tile Special 2 x 2 Inverted | 11203 | Zwart | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Zwart | 10× |
| BRICK 2X8 | 93888 | Zwart | 1× |
| Slope Curved 4 x 1 Inverted | 13547 | Zwart | 16× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 4× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Zwart | 12× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zwart | 3× |
| Slope 45? 2 x 1 with 2/3 Cutout [New Version] | 15672 | Zwart | 6× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Zwart | 2× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Zwart | 2× |
| ANGLE PLATE 1X2 / 2X4 | 21731 | Zwart | 2× |
| Tile Round 2 x 2 with Hole | 15535 | Zwart | 1× |
| Slope Curved 2 x 1 Inverted | 24201 | Zwart | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Zwart | 7× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Zwart | 4× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Zwart | 2× |
| ANG.BRICK 5X5, Ø4,85 | 28973 | Zwart | 4× |
| Tile Round 1 x 1 Quarter | 25269 | Zwart | 4× |
| Plate Special 1 x 1 with Vertical Tooth | 15070 | Zwart | 2× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Zwart | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 4× |
| Weapon Harpoon [Smooth Shaft] | 18041 | Zwart | 4× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Zwart | 10× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Zwart | 3× |
| Hinge Plate 2 x 4 with Pin Hole with 2 Holes - Top | 43045 | Zwart | 1× |
| PLATE 1X2 W. STUB/VERTICAL | 49716 | Zwart | 4× |
| Tile Special 1 x 3 Inverted with Center Hole | 35459 | Zwart | 10× |
| PLATE 4X4 W/ANGLE | 41822 | Zwart | 2× |
| BAD ROBOT ARM | 49753 | Zwart | 6× |
| LAMP HOLDER | 41632 | Zwart | 2× |
| Bracket 1 x 1 - 1 x 1 | 36841 | Zwart | 4× |
| Slope Curved 4 x 3 with 3 Layers, 1 x 3 Cutout on Underside | 66955 | Zwart | 1× |
| BRICK 2X2 Ø4.85 VERTIC. SNAP | 48454 | Zwart | 3× |
| PLATE 1X2 W/HOLDER, VERTICAL | 49563 | Zwart | 1× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Zwart | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Zwart | 4× |
| Weapon Hilt Symmetric | 66909 | Zwart | 1× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Zwart | 4× |
| Wedge Plate 6 x 2 Left | 78443 | Zwart | 1× |
| Wedge Plate 6 x 2 Right | 78444 | Zwart | 1× |
| Plate Special 1 x 2 [Open O Top Clip] | 44861 | Zwart | 6× |
| Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes | 67696 | Zwart | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Zwart | 22× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Zwart | 3× |
| Plate Special 1 x 2 with 2 End Towballs | 3170 | Zwart | 1× |
| Animal Body Part, Horn Stacked 45 deg. with Axle Connectors | 2142 | Zwart | 1× |
| Plate 1 x 1 x 2/3 Half Round with Side Stud | 3386 | Zwart | 3× |
| Plate Special 1 x 4 Rounded with 2 Open Studs | 77845 | Zwart | 4× |
| ROOF TILE 3X4/25 DEG. | 3016 | Zwart | 8× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Zwart | 2× |
| Plate 3 x 3 Corner | 77844 | Zwart | 2× |
| Brick Round Corner 10 x 10 with Slope 33° Edge, Axle Hole, Facet Cutout | 58846 | Zwart | 4× |
| BRICK 4X6, W/ 4.85 HOLE, CUT OUT | 1679 | Zwart | 1× |
| Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder | 86876 | Zwart | 2× |
| Wedge Curved 6 x 2 Right, Smooth Inner Walls | 5711 | Zwart | 1× |
| 2X1 ST.Ø4.9 HOLE W. HALF BEAM | 49132 | Zwart | 5× |
| Hat Conical Asian with Raised Center | 26007 | Zwart | 1× |
| Bracket 5 x 2 x 1 1/3 with Bottom Stud Holder | 79180 | Zwart | 1× |
| Slope Curved 3 x 1 x 2/3 | 7302 | Zwart | 2× |
| Slope 30° 1 x 1 x 2/3 Double Corner | 7826 | Zwart | 6× |
| Brick Round Curved 1 x 1 x 1 Quarter Dome | 5848 | Zwart | 2× |
| BRICK 4X6 W/ BOW, W/ ANGLE | 8132 | Pearl Very Light Gray | 1× |
| Technic Axle 4 | 3705 | Zwart | 10× |
| Technic Axle 10 | 3737 | Zwart | 2× |
| Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 6553 | Zwart | 4× |
| Technic Axle 2 Notched | 32062 | Zwart | 3× |
| Technic Ball Joint with Through Axle Hole | 53585 | Zwart | 2× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Zwart | 6× |
| Technic Panel Fairing #14 Large Short Smooth, Side B | 64680 | Zwart | 1× |
| Technic Panel Fairing #13 Large Short Smooth, Side A | 64394 | Zwart | 1× |
| Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 18651 | Zwart | 2× |
| Technic Pin Connector Hub with 1 Axle | 22961 | Zwart | 2× |
| ANGLE ELEMENT, 157,5 DEGR. [3] | 42128 | Zwart | 8× |
| ANGLE ELEMENT, 112,5 DEGR. [5] | 41488 | Zwart | 2× |
| CROSS BLOCK 3M | 42796 | Zwart | 2× |
| CROSS BLOCK/FORM 2X2X2 | 42193 | Zwart | 2× |
| Technic Pin with Friction Ridges Lengthwise with No Center Slots | 61332 | Zwart | 29× |
| Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 48267 | Zwart | 4× |
| Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides | 67695 | Zwart | 4× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Zwart | 12× |
| Technic Axle Connector Hub with 3 Axles at 120° | 57585 | Zwart | 4× |
| Technic Panel Triangle 5 x 4 Right | 80274 | Zwart | 1× |
| Technic Panel Triangle 5 x 4 Left | 80278 | Zwart | 1× |
| 3 BRANCH CROSSHOLE W. HOLE | 49155 | Zwart | 4× |
| Technic Axle and Pin Connector Angled #7 - 168.75° | 4450 | Zwart | 2× |
| Brick 1 x 4 | 3010 | Zandkleur | 2× |
| Plate 4 x 6 | 3032 | Zandkleur | 1× |
| Plate 2 x 2 | 3022 | Zandkleur | 2× |
| ROUND BRICK 1X1 | 3062 | Zandkleur | 2× |
| Plate 2 x 3 | 3021 | Zandkleur | 3× |
| BRICK Ø16 W. CROSS | 6143 | Zandkleur | 1× |
| PLATE 2X2 ROUND | 4032 | Zandkleur | 5× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Zandkleur | 4× |
| Plate 4 x 4 | 3031 | Zandkleur | 4× |
| Brick Arch 1 x 4 | 3659 | Zandkleur | 3× |
| Plate 16 x 16 | 91405 | Zandkleur | 1× |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 15208 | Zandkleur | 2× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Zandkleur | 3× |
| Horn with Shaft | 88513 | Zandkleur | 4× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Zandkleur | 2× |
| Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 71752 | Zandkleur | 2× |
| Tile 2 x 6 | 69729 | Zandkleur | 2× |
| PLATE 2X1 W/HOLDER,VERTICAL | 42923 | Zandkleur | 8× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Zandkleur | 2× |
| Turntable 2 x 2 Plate, Base | 3680 | Zandkleur | 1× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Zandkleur | 1× |
| Technic Ball Joint with Through Axle Hole | 53585 | Zandkleur | 2× |
| Brick 1 x 8 | 3008 | Donkerblauw | 3× |
| Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 42924 | Zwart | 6× |
| ELEMENT SEPARATOR | 31510 | Oranje | 1× |
| Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole] | 65304 | Oranje | 8× |
| Brick 1 x 4 | 3010 | Rood | 1× |
| FLAT TILE 2X2 | 3068 | Rood | 1× |
| Plate 2 x 16 | 4282 | Rood | 8× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Rood | 14× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Rood | 2× |
| ANGLE PLATE 1X2 / 2X4 | 21731 | Rood | 2× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Rood | 5× |
| Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 41740 | Rood | 2× |
| Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 50340 | Rood | 4× |
| Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long | 13564 | Rood | 1× |
| Plate 1 x 1 x 2/3 with Open Stud | 86996 | Rood | 4× |
| 3.2 SHAFT W/3.2 HOLE | 49755 | Rood | 1× |
| Plate 3 x 3 Corner | 77844 | Rood | 4× |
| Plate Special 1 x 1 with Hole Through Stud, 3 Bars and 3 Bar Holes | 1941 | Rood | 2× |
| Technic Axle 2 Notched | 32062 | Rood | 19× |
| Technic Axle Connector Smooth [with x Hole + Orientation] | 59443 | Rood | 2× |
| Technic Pin Connector Round 1L [Beam] | 18654 | Rood | 2× |
| Technic Axle 4 | 3705 | Rood | 2× |
| Technic Axle 6 | 3706 | Rood | 1× |
| Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls] | 42195 | Rood | 2× |
| Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole | 66906 | Rood | 4× |
| Technic Pin 1/2 with Friction | 89678 | Rood | 8× |
| Plate 1 x 8 | 3460 | Geel | 1× |
| Plate 2 x 6 | 3795 | Geel | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Geel | 4× |
| Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 47457 | Geel | 4× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Geel | 2× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Geel | 2× |
| Brick 2 x 4 | 3001 | Limoen | 3× |
| Brick 1 x 3 | 3622 | Limoen | 10× |
| Plate 1 x 4 | 3710 | Limoen | 4× |
| Plate 1 x 3 | 3623 | Limoen | 3× |
| Plate 4 x 4 | 3031 | Limoen | 3× |
| ROOF TILE 1X2/45° | 3040 | Limoen | 4× |
| Plate 2 x 4 | 3020 | Limoen | 3× |
| Plate 2 x 6 | 3795 | Limoen | 2× |
| Slope 45? 2 x 2 | 3039 | Limoen | 2× |
| Plate 2 x 3 | 3021 | Limoen | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Limoen | 10× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 87747 | Limoen | 4× |
| PLATE 2X2 ROUND | 4032 | Limoen | 13× |
| Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] | 28802 | Limoen | 2× |
| ANGLE ELEMENT, 0 DEGREES [1] | 42127 | Limoen | 2× |
| Equipment Candlestick | 37762 | Zandkleur | 2× |
| Brick Curved 2 x 3 | 6215 | Lichtblauwgrijs | 2× |
| Plate 2 x 2 Corner | 2420 | Metallic zilver | 5× |
| Wedge Plate 3 x 2 Left | 43723 | Lichtblauwgrijs | 3× |
| Wedge Plate 3 x 2 Right | 43722 | Lichtblauwgrijs | 3× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Lichtblauwgrijs | 4× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Lichtblauwgrijs | 3× |
| Wedge Plate 2 x 2 Left | 24299 | Lichtblauwgrijs | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Lichtblauwgrijs | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Lichtblauwgrijs | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Lichtblauwgrijs | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Lichtblauwgrijs | 2× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Lichtblauwgrijs | 2× |
| Plate 2 x 10 | 3832 | Donkerblauwgrijs | 4× |
| Wedge Plate 3 x 2 Right | 43722 | Donkerblauwgrijs | 3× |
| Wedge Plate 3 x 2 Left | 43723 | Donkerblauwgrijs | 3× |
| Plate 2 x 8 | 3034 | Donkerblauwgrijs | 1× |
| Tile 1 x 4 with Groove | 2431 | Donkerblauwgrijs | 2× |
| Slope 45? 2 x 2 | 3039 | Donkerblauwgrijs | 1× |
| Plate 1 x 6 | 3666 | Donkerblauwgrijs | 3× |
| ROUND BRICK 1X1 | 3062 | Donkerblauwgrijs | 4× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Donkerblauwgrijs | 4× |
| Wedge Plate 6 x 3 Left | 54384 | Donkerblauwgrijs | 1× |
| Wedge Plate 6 x 3 Right | 54383 | Donkerblauwgrijs | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Donkerblauwgrijs | 7× |
| Plate Special 4 x 4 with Studs on One Edge [Plain] | 6179 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 with 5.9mm Centre Side Towball | 14417 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 with End Towball | 22890 | Donkerblauwgrijs | 12× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Donkerblauwgrijs | 2× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Donkerblauwgrijs | 4× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Donkerblauwgrijs | 1× |
| Tile 2 x 3 | 26603 | Donkerblauwgrijs | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Donkerblauwgrijs | 3× |
| Plate Special / Shield Rectangular with 4 Studs, Handle | 30166 | Donkerblauwgrijs | 1× |
| PLATE 1X2 W. STUB/VERTICAL | 49716 | Donkerblauwgrijs | 4× |
| BRICK 2X2 Ø4.85 FEMALE | 48370 | Donkerblauwgrijs | 2× |
| PLATE 1X1 W. HOLDER | 44860 | Donkerblauwgrijs | 1× |
| Weapon Hilt Symmetric | 66909 | Donkerblauwgrijs | 1× |
| PLATE 2X4/2X2X1 W. VERTICAL SN | 42194 | Donkerblauwgrijs | 2× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Donkerblauwgrijs | 5× |
| Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | 73562 | Donkerblauwgrijs | 2× |
| Brick Special 1 x 2 x 1 1/3 with Rotation Joint Socket | 80431 | Donkerblauwgrijs | 4× |
| Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] | 3484 | Donkerblauwgrijs | 2× |
| Plate 2x2 w. stump/top | 53968 | Donkerblauwgrijs | 1× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Donkerblauwgrijs | 2× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Donkerblauwgrijs | 2× |
| Brick Special 1 x 2 x 1 2/3 with 8 Studs on 2 Sides | 80796 | Donkerblauwgrijs | 2× |
| Slope Inverted 33° 3 x 2, Round Bottom Pin | 2752 | Donkerblauwgrijs | 1× |
| Technic Beam 1 x 2 with Ball Joint Angled | 50923 | Donkerblauwgrijs | 2× |
| Rotation Joint Socket with 2 Pins | 80563 | Donkerblauwgrijs | 2× |
| Technic Pin 1/2 with Friction | 89678 | Donkerblauwgrijs | 8× |
| Brick 1 x 4 | 3010 | Zwart | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 12× |
| Brick 1 x 1 | 3005 | Zwart | 2× |
| Plate 2 x 4 | 3020 | Zwart | 9× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 2× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Zwart | 10× |
| Slope 33° 3 x 1 | 4286 | Zwart | 2× |
| Slope 30? 1 x 2 x 2/3 | 85984 | Zwart | 10× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Zwart | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Zwart | 2× |
| Plate 2 x 6 | 3795 | Zwart | 2× |
| Slope Curved 2 x 2 x 2/3 Inverted | 32803 | Zwart | 1× |
| Tile Round 1 x 1 Quarter | 25269 | Zwart | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Zwart | 2× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Zwart | 3× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Zwart | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Zwart | 4× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Zwart | 6× |
| Windscreen 6 x 4 x 1 Hexagonal with Handle | 27262 | Zwart | 2× |
| PLATE 1x2 W. HORIZONTAL HOLE Ø4,85 REV. | 28809 | Zwart | 1× |
| Tile Special 1 x 2 with Two Vertical Teeth / Tooth | 15209 | Zwart | 6× |
| Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle | 5852 | Zwart | 10× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Zwart | 6× |
| Tile Round 2 x 2 Half Circle | 5520 | Zwart | 1× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Zwart | 7× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Zwart | 10× |
| Plate 4 x 4 | 3031 | Zwart | 1× |
| BRICK Ø16 W. CROSS | 6143 | Medium Azur | 1× |
| Plate 2 x 3 | 3021 | Zwart | 2× |
| Plate 1 x 2 | 3023 | Zwart | 4× |
| Plate 1 x 3 | 3623 | Zwart | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Zwart | 6× |
| Brick 1 x 1 | 3005 | Zwart | 2× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Zwart | 14× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Zwart | 3× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Zwart | 4× |
| RIGHT PANEL 2X5 (N0 21) | 43499 | Zwart | 1× |
| LEFT PANEL 2X5 (NR 22) | 43500 | Zwart | 1× |
| Tile Round 2 x 2 with Bottom Stud Holder | 14769 | Metallic zilver | 3× |
| Tile Round 1 x 2 | 1126 | Lichtblauwgrijs | 7× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Lichtblauwgrijs | 5× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Lichtblauwgrijs | 5× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Lichtblauwgrijs | 2× |
| Plate 1 x 2 | 3023 | Lichtblauwgrijs | 6× |
| Plate 1 x 1 | 3024 | Lichtblauwgrijs | 4× |
| FLAT TILE 1X1 | 3070 | Lichtblauwgrijs | 6× |
| Plate 1 x 3 | 3623 | Lichtblauwgrijs | 2× |
| Technic Brick 1 x 4 [3 Pin Holes] | 3701 | Lichtblauwgrijs | 5× |
| Technic Brick 1 x 8 [7 Pin Holes] | 3702 | Lichtblauwgrijs | 2× |
| PLATE 2X2 ROUND | 4032 | Lichtblauwgrijs | 4× |
| Brick Special 1 x 2 x 2/3 with Studs on Sides | 4595 | Lichtblauwgrijs | 1× |
| Technic Brick 1 x 2 [2 Pin Holes] | 32000 | Lichtblauwgrijs | 2× |
| Technic Brick 4 x 6 with 2 x 4 Opening | 32531 | Lichtblauwgrijs | 1× |
| BRICK 2X6 | 44237 | Lichtblauwgrijs | 6× |
| Slope 45° 2 x 2 Double Convex | 3045 | Lichtblauwgrijs | 5× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Lichtblauwgrijs | 2× |
| Turntable 2 x 2 Plate - Top | 3679 | Lichtblauwgrijs | 1× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Lichtblauwgrijs | 3× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Lichtblauwgrijs | 2× |
| Slope 18° 4 x 1 | 60477 | Lichtblauwgrijs | 3× |
| Brick Special 1 x 2 with 2 Studs on 1 Side | 11211 | Lichtblauwgrijs | 2× |
| Slope Curved 2 x 1 No Studs [1/2 Bow] | 11477 | Lichtblauwgrijs | 2× |
| Plate Special 1 x 2 5.9mm Towball Socket | 14418 | Lichtblauwgrijs | 10× |
| Plate Special 1 x 2 5.9mm Centre Side Towball Socket | 14704 | Lichtblauwgrijs | 6× |
| Slope Curved 2 x 2 x 2/3 | 15068 | Lichtblauwgrijs | 2× |
| Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side | 22885 | Lichtblauwgrijs | 2× |
| PLATE 2X2 W 1 KNOB | 23893 | Lichtblauwgrijs | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 28626 | Lichtblauwgrijs | 4× |
| Tile Special 2 x 2 Corner with Cut Corner - Facet | 27263 | Lichtblauwgrijs | 11× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Lichtblauwgrijs | 1× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Lichtblauwgrijs | 3× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Lichtblauwgrijs | 3× |
| Plate Special 1 x 2 Rounded with 2 Open Studs | 35480 | Lichtblauwgrijs | 8× |
| PLATE 1X1 W/3.2 SHAFT/1.5 HOLE | 31561 | Lichtblauwgrijs | 2× |
| FLAT TILE 1X1, ROUND | 35381 | Lichtblauwgrijs | 2× |
| Wedge Sloped 18° 4 x 4 Corner | 43708 | Lichtblauwgrijs | 3× |
| Wedge Sloped 45° 3 x 3 Left | 42862 | Lichtblauwgrijs | 3× |
| Wedge Sloped 45° 3 x 3 Right | 48165 | Lichtblauwgrijs | 3× |
| Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 73109 | Lichtblauwgrijs | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Lichtblauwgrijs | 10× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Lichtblauwgrijs | 8× |
| 3 w.arch w.knob and shaft ø3.2 | 42456 | Lichtblauwgrijs | 2× |
| Bracket 1 x 1 - 1 x 2 | 79389 | Lichtblauwgrijs | 2× |
| Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version | 4304 | Lichtblauwgrijs | 3× |
| Slope 18° 2 x 1 x 2/3 | 5404 | Lichtblauwgrijs | 17× |
| Wedge Sloped 2 x 5 Right | 3505 | Lichtblauwgrijs | 1× |
| Wedge Sloped 2 x 5 Left | 3504 | Lichtblauwgrijs | 1× |
| Slope Curved 1 x 4 with Stud Notch Right | 5414 | Lichtblauwgrijs | 2× |
| Slope Curved 1 x 4 with Stud Notch Left | 5415 | Lichtblauwgrijs | 2× |
| Technic Pin Long 3l, No Friction Ridges, with Stop and Hole | 77765 | Lichtblauwgrijs | 2× |
| Technic Pin Connector Hub with 3L Axle | 5713 | Lichtblauwgrijs | 2× |
| Rotation Joint Disc with 2 Pins | 6991 | Lichtblauwgrijs | 2× |
| MINI ARMOUR, NO. 28 | 4923 | Zwart | 1× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Zwart | 2× |
| Tile 1 x 8 with Groove | 4162 | Zwart | 1× |
| Plate 1 x 2 | 3023 | Zwart | 8× |
| Plate 1 x 8 | 3460 | Zwart | 1× |
| Plate 2 x 2 | 3022 | Zwart | 2× |
| Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) | 15573 | Zwart | 1× |
| Plate 2 x 3 | 3021 | Zwart | 2× |
| Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 70681 | Zwart | 2× |
| Plate 1 x 2 | 3023 | Zwart | 6× |
| Plate 2 x 4 | 3020 | Zwart | 3× |
| FLAT TILE 1X2 | 3069 | Olive Green | 5× |
| FLAT TILE 1X1, ROUND | 35381 | Olive Green | 3× |
| Plant, Plate 1 x 1 Round with 3 Leaves | 32607 | Zwart | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Zwart | 5× |
| Plate 1 x 3 | 3623 | Zwart | 10× |
| PLATE 2X2 ROUND | 4032 | Roodbruin | 3× |
| Plate Special 4 x 4 with 2 x 2 Opening | 64799 | Zwart | 1× |
| BRICK 2X10 | 92538 | Roodbruin | 1× |
| Plate Special 2 x 2 with Only 2 studs | 33909 | Zwart | 2× |
| PLATE 1X2 W. 1 HORIZONTAL SNAP | 65458 | Roodbruin | 4× |
| Technic Brick 1 x 1 with Axle Hole | 73230 | Zwart | 2× |
| Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth | 57360 | Zwart | 1× |
| Plate Special 1 x 3 Rounded with 3 Open Studs | 77850 | Zwart | 2× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Zwart | 2× |
| Technic Beam 1 x 3 Thick | 32523 | Zwart | 3× |
| Technic Axle 3 with Stop | 24316 | Roodbruin | 1× |
| Plate 2 x 8 | 3034 | Donker zandkleur | 3× |
| Plate 2 x 4 | 3020 | Donker zandkleur | 2× |
| Plate 6 x 6 | 3958 | Donker zandkleur | 2× |
| Plate 1 x 4 | 3710 | Donker zandkleur | 8× |
| Wedge Plate 3 x 2 Left | 43723 | Donker zandkleur | 5× |
| Wedge Plate 3 x 2 Right | 43722 | Donker zandkleur | 5× |
| Plate 4 x 8 | 3035 | Donker zandkleur | 1× |
| Plate 1 x 6 | 3666 | Donker zandkleur | 3× |
| Wedge Plate 6 x 6 Cut Corner | 6106 | Donker zandkleur | 2× |
| Plate 2 x 3 | 3021 | Donker zandkleur | 6× |
| Plate 6 x 10 | 3033 | Donker zandkleur | 1× |
| Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 18674 | Donker zandkleur | 2× |
| Plate 4 x 4 Corner | 2639 | Donker zandkleur | 2× |
| Tile 2 x 4 with Groove | 87079 | Donker zandkleur | 18× |
| Wedge Plate 2 x 2 Cut Corner | 26601 | Donker zandkleur | 8× |
| Bracket 1 x 2 - 1 x 2 Inverted | 99780 | Donker zandkleur | 26× |
| Slope Curved 2 x 1 with Stud Notch Right | 29119 | Donker zandkleur | 2× |
| Slope Curved 2 x 1 with Stud Notch Left | 29120 | Donker zandkleur | 2× |
| Horn with Shaft | 88513 | Donker zandkleur | 3× |
| Bracket 1 x 2 - 2 x 2 | 21712 | Donker zandkleur | 14× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Donker zandkleur | 4× |
| Bracket 1 x 2 - 2 x 2 Inverted | 99207 | Donker zandkleur | 16× |
| Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | 2654 | Donker zandkleur | 2× |
| Tile Round 1 x 1 Quarter | 25269 | Donker zandkleur | 4× |
| Wedge Plate 2 x 2 Left | 24299 | Donker zandkleur | 5× |
| Wedge Plate 2 x 2 Right | 24307 | Donker zandkleur | 5× |
| Tile 2 x 2 Curved, Macaroni | 27925 | Donker zandkleur | 2× |
| Plate Special 2 x 3 with Rocks | 27261 | Donker zandkleur | 6× |
| Plate 1x1 w/ 1.5 Hole | 35344 | Donker zandkleur | 4× |
| Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 15208 | Donker zandkleur | 10× |
| Slope 45° 2 x 1 Inverted with 2/3 Cutout | 2310 | Donker zandkleur | 6× |
| PLATE 2X2 ROUND | 4032 | Donker zandkleur | 2× |
| Plate Round Corner 2 x 2 with 1 x 1 Cutout | 79491 | Donker zandkleur | 4× |
| Tile 45° Cut 2 x 2 (Triangle) | 35787 | Donker zandkleur | 2× |
| Animal / Creature Body Part, Claw with Clip | 3171 | Donker zandkleur | 2× |
| Bracket 1 x 1 - 1 x 2 Inverted | 73825 | Donker zandkleur | 4× |
| Plate Special 1 x 2 with Clip Vertical on End | 78256 | Donker zandkleur | 6× |
| Plate Special 1 x 1 with Tooth | 49668 | Donker zandkleur | 2× |
| Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Large | 11089 | Donker zandkleur | 4× |
| CROSSAXLE 3M WITH KNOB | 13670 | Donker zandkleur | 2× |
| ANGLE ELEMENT 135 DEG. [4] | 42156 | Donker zandkleur | 2× |
| Horn with Shaft | 88513 | Silver Metallic | 8× |
| Equipment Lantern | 37776 | Pearl Titanium | 1× |
| Weapon Sword (Uruk-hai) | 10050 | Pearl Titanium | 1× |
| PLATE 1X2 W/ SHAFT 12M | 49546 | Trans-doorzichtig | 2× |
| Bar Curved with Axle End and 1 x 1 Round Plate | 4042 | Trans-doorzichtig | 1× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 29387 | Trans-doorzichtig | 2× |
| Bar, Angled with 1 x 1 Round Plate / Stud on End | 65578 | Trans-doorzichtig | 6× |
| ROUND BRICK 1X1 | 35390 | Trans-doorzichtig | 4× |
| Plate Round 1 x 1 with Hollow Stud and Underside Clip | 5264 | Trans-doorzichtig | 1× |
| ROOF TILE 1X1X2/3 | 35338 | Zwart | 4× |
| PLATE 1X2 | 28653 | Zwart | 15× |
| PLATE 1X1 ROUND | 34823 | Zwart | 9× |
| Parabolic Element D16 | 35395 | Zwart | 1× |
| ROOF TILE 1X1X2/3 | 35338 | Transparent Bright Orange | 2× |
| BLADE, NO. 6 | 28683 | Transparent Bright Orange | 2× |
| PL.ROUND 1X1 W. THROUGHG. HOLE | 29387 | Transparent Bright Orange | 2× |
| PLATE 1X2 | 28653 | Transparent Bright Orange | 2× |
| Wave / Lightning Angular, Single | 27256 | Trans-lichtblauw | 2× |
| Curled Decorative Ornament with Bar | 28870 | Trans-neongroen | 2× |
| ROOF TILE 1X1X2/3 | 35338 | Trans-neongroen | 5× |
| PLATE 1X2 | 28653 | Trans-neongroen | 2× |
| Nose Cone Small 1x1 | 28701 | Trans-neongroen | 2× |
| PLATE 1X1 W/TOOTH | 35162 | Trans-neongroen | 3× |
| PLATE 1X2 | 28653 | Zwart | 4× |
| PLATE 1X1 ROUND | 34823 | Zwart | 2× |
| PYRAMID RIDGED TILE 1X1X2/3 | 35343 | Zwart | 2× |
| ROOF TILE 1X1X2/3 | 35338 | Trans-lichtblauw | 2× |
| AXE HEAD W HOLE Ø 3.2 | 79805 | Trans-lichtblauw | 2× |
| PLATE 1X2 | 28653 | Trans-lichtblauw | 2× |
| KITCHEN EQUIPMENT, NO. 9 | 3576 | Trans-lichtblauw | 2× |
| Wave / Lightning Angular, Single | 27256 | Trans-donkerroze | 2× |
| ROOF TILE 1X1X2/3 | 35338 | Zwart | 2× |
| PLATE 1X2 | 28653 | Zwart | 2× |
| Plant, Flower, Peony Rose with 2 Layers | 5904 | Zwart | 1× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Geel | 3× |
| Cone 1 x 1 [Top Groove] | 59900 | Geel | 4× |
| Plate Special 1 x 2 [Side Handle Closed Ends] | 48336 | Geel | 2× |
| Plate 1 x 1 | 3024 | Geel | 4× |
| Slope 45° 2 x 1 Triple with Inside Stud Holder | 15571 | Geel | 9× |
| Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 21459 | Limoen | 4× |
| Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 99563 | Geel | 4× |
| Plate Special 1 x 1 Rounded with Handle | 26047 | Geel | 2× |
| Plate 1 x 2 | 3023 | Geel | 8× |
| Plate 1x1 with Up Right Holder | 44842 | Medium Lime | 2× |
| Horn with Shaft | 88513 | Medium Lime | 4× |
| Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | 28192 | Geel | 4× |
| Minifig Neckwear Shoulder Pads with Spikes | 12618 | Parel goud | 1× |
| Fin Jagged with Axle Hole | 76919 | Parel goud | 2× |
| FLAT TILE 2X3 W/ ANGLE | 35341 | Medium Lime | 8× |
| Plate 2 x 2 | 3022 | Geel | 5× |
| Wedge Sloped 45° 2 x 4 Triple | 47759 | Parel goud | 6× |
| Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 47456 | Parel goud | 8× |
| Brick Special 2 x 5 with Slope, Studs on Side | 79897 | Helder licht oranje | 5× |
| Wedge Sloped 4 x 2 Triple Left | 43710 | Parel goud | 3× |
| Wedge Sloped 4 x 2 Triple Right | 43711 | Donker zandkleur | 3× |
| Minifig Neckwear Armor Shoulder Pad Single with Scabbard for 2 Katanas, Wedge | 5501 | Parel goud | 1× |
| Weapon Sword / Katana / Wakizashi Short | 5644 | Parel goud | 5× |
| Creature Body Part, Dragon Head Upper Jaw, Hollow Eyes, Spikes | 3770 | Wit | 4× |
| Wedge Plate 2 x 2 Left | 24299 | Geel | 2× |
| Wedge Plate 2 x 2 Right | 24307 | Geel | 2× |
| Bracket 1 x 1 - 1 x 1 Inverted | 36840 | Geel | 12× |
| Wedge Sloped 4 x 4 Triple with 3 Ridges on Slope | 86148 | Parel goud | 6× |
| Tile 1 x 2 with Stud Notch Right | 5092 | Geel | 9× |
| Tile 1 x 2 with Stud Notch Left | 5091 | Geel | 9× |
| Wedge Plate 2 x 4 27° Right | 65426 | Geel | 1× |
| Wedge Plate 2 x 4 27° Left | 65429 | Geel | 1× |
| Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 48267 | Geel | 2× |
| Large Figure Limb Cover / Claw / Spike Large with Axle | 15362 | Parel goud | 4× |
| Plate 2 x 2 Corner | 2420 | Wit | 4× |
| Wedge Plate 3 x 3 Cut Corner | 2450 | Wit | 2× |
| Brick 2 x 2 | 3003 | Wit | 2× |
| Brick 1 x 6 | 3009 | Wit | 2× |
| Plate 2 x 4 | 3020 | Wit | 5× |
| Plate 2 x 3 | 3021 | Wit | 11× |
| Plate 2 x 2 | 3022 | Wit | 3× |
| Plate 4 x 6 | 3032 | Wit | 1× |
| Slope 45? 2 x 2 | 3039 | Wit | 4× |
| ROUND BRICK 1X1 | 3062 | Wit | 3× |
| Technic Plate 2 x 4 [3 Holes] | 3709 | Wit | 2× |
| Plate 1 x 4 | 3710 | Wit | 18× |
| ROOF TILE 1X3/25° INV. | 4287 | Wit | 4× |
| Plate Round 1 x 1 with Solid Stud | 6141 | Wit | 4× |
| ROOF TILE 1X2/45° | 3040 | Wit | 6× |
| Wedge Curved 6 x 2 Left, Inner Ridges | 41748 | Wit | 3× |
| Wedge Plate 3 x 2 Right | 43722 | Wit | 5× |
| Wedge Plate 3 x 2 Left | 43723 | Wit | 5× |
| BRICK 2X6 | 44237 | Wit | 3× |
| Slope 45° 2 x 2 Double Convex | 3045 | Wit | 2× |
| Plate 4 x 4 | 3031 | Wit | 5× |
| Slope 30° 1 x 1 x 2/3 (Cheese Slope) | 54200 | Wit | 4× |
| Brick Special 1 x 1 with Stud on 1 Side | 87087 | Wit | 2× |
| Wedge Curved 4 x 4 No Top Studs | 47753 | Wit | 3× |
| Tile Special 2 x 2 Inverted | 11203 | Wit | 4× |
| Bracket 1 x 2 - 1 x 2 | 99781 | Wit | 8× |
| Slope Curved 4 x 1 Double with No Studs | 93273 | Wit | 6× |
| Slope Curved 4 x 2 No Studs | 93606 | Wit | 2× |
| Slope Curved 4 x 1 Inverted | 13547 | Wit | 4× |
| Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom | 11215 | Wit | 3× |
| Brick Special 1 x 2 Palisade [aka Log] | 30136 | Wit | 2× |
Bouw-DNA
Onderdeleninzichten voor Ultra Dragon Battle
Met 2.177 onderdelen zit deze build +378% ten opzichte van de gemiddelde Ninjago set en +249% ten opzichte van de gemiddelde release uit 2026.
T.o.v. gemiddelde Ninjago set
Gemiddelde Ninjago set: 455 onderdelen over 408 andere sets.
T.o.v. gemiddelde set uit 2026
Gemiddelde set uit 2026: 624 onderdelen over 427 andere sets.
Kleurprofiel
Dominante kleur
Zwart
Unieke onderdelen
6.5 onderdelen per uniek type
Herhalingsfactor
Gemiddeld aantal onderdelen per uniek type.
Meest gebruikte onderdeel
Bracket 1 x 2 - 2 x 2 Inverted
49xResultaten zijn gebaseerd op officiële LEGO onderdelen inventarissen. Nauwkeurigheid verbetert naarmate je set compleetheid bevestigt.
Deze site is niet gelieerd aan of goedgekeurd door de LEGO Groep.









